USA-Bericht
-
ASTM Research Report RR:D02-1458
An interlaboratory study was conducted for test method D6470 to establish precision by testing 3 desalted crude oils, neat and spiked with two standard salt solutions, at three different concentrations up to a level of 0.14% NaCl on crude.
13.08.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E01-1025
An interlaboratory study was conducted by eleven laboratories which tested four materials to establish the precision statement of test method E1938.
11.08.1998 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D35-1004
An interlaboratory study was conducted by ten laboratories which tested three materials to establish the precision statement of test method D5887.
05.08.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1434
An interlaboratory study for test method D1264 to update the precision statement on greases.
05.08.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1432
An interlaboratory study for test method D6293 was conducted by five laboratories testing thirty-five samples to establish precision statements.
05.08.1998 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:E15-1052
An interlaboratory study was conducted by ten laboratories testing five samples to establish a precision statement for the test methods in E534.
05.08.1998 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:C16-1023
An interlaboratory study was conducted by three laboratories, testing two materials to establish a precision statement for Test Method C1374, Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation.
04.08.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C09-1017
Research report C09-1017 describes an interlaboratory study to determine the within-laboratory precision of the length change method of determining freeze-thaw resistance of beams subjected to rapid freezing and thawing, and establish precision statements for C666.
29.07.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E33-1008
An interlaboratory study was conducted by ten laboratories which tested the same 2 noise sources in a room using the same instruments to establish the precision statement of test method E1574.
21.07.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:F07-1004
An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method F1863.
21.07.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E15-1051
An interlaboratory study was conducted by one laboratory which tested four materials to establish the precision statement of test method E538.
09.07.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1428
An interlaboratory study which covered a set of 21 gasolines excluding M-85 and M-100 to establish a precision statement for Case II in test method D2622.
09.07.1998 - PDF - Englisch -
mehr dazu102,90 € -
NACE 7L198-1998
Design of Galvanic Anode Cathodic Protection Systems for Offshore Structures
01.07.1998 - PDF - Englisch -
mehr dazu192,00 € -
ASTM Research Report RR:D02-1426
An interlaboratory study was conducted by six laboratories testing nine oil samples to establish a precision statement for test method D6278.
25.06.1998 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D05-1022
An interlaboratory study was conducted by seven laboratories testing six cokes to establish a precision statement for test method D5341.
24.06.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:B09-1009
The following precision data were developed using the procedures contained in Test Method E 194, standard test method for acid-insoluble content of copper and iron powders, from an interlaboratory study that performed six sets of tests.
15.06.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1433
An interlaboratory study for test method D6296 conducted by six laboratories to calculate a precision statement.
12.06.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:G01-1020
An interlaboratory study was conducted by ten laboratories which tested four grades of stainless steels to determine their Critical Pitting Temperatures and establish the precision statement of test method G150.
12.06.1998 - PDF - Englisch -
mehr dazu56,70 € -
NACE 7K198-1998
Predictably Effective Equipment and In Situ Processes Applied to Water Systems
01.06.1998 - PDF - Englisch -
mehr dazu192,00 € -
ASTM Research Report RR:D20-1201
An interlaboratory study was conducted by seven laboratories testing three materials to establish a precision statement for test method D1621.
29.05.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D19-1162
An interlaboratory study was conducted by nine laboratories testing samples which were prepared by dispersing a specially prepared dry powder in approximately 350mL of distilled water so that a precision statement could be established for test method D3977.
27.05.1998 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D19-1163
An interlaboratory study was conducted by ten laboratories which tested ten materials to establish the precision statement of test method D5997.
27.05.1998 - PDF - Englisch -
mehr dazu115,50 € -
192,00 €
-
ASTM Research Report RR:D01-1108
An interlaboratory study performed by six laboratories on five samples to determine the precision values of Color Samples with Pt-Co Color less than 25 in D1209.
02.04.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C08-1013
An interlaboratory study was run in which randomly drawn test specimens of two materials (tabular alumina and Mucosa 47) were tested for true specific gravity by gas comparison pycnometer to establish precision statements for test method C604.
02.04.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1421
An interlaboratory study for test method D445 was conducted to determine the precision of manual and automatic instruments in measuring kinematic viscosity at 100 degrees C of high viscosity lube additive samples.
25.02.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1422
An interlaboratory study for test method D445 to determine the precision of manual and automatic viscometers in measuring the viscosity range from 1.5 to 12 mm squared/s at 40 degrees C.
23.02.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1420
An interlaboratory study was conducted for D445 to determine the precision of the determination of kinematic viscosity of jet fuels by D445 at -20 degree C.
23.02.1998 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:E37-1023
An interlaboratory study was conducted by eight laboratories which tested two materials to establish the precision statement of test method E1719.
23.02.1998 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:E01-1022
An interlaboratory study was conducted by twelve laboratories which tested 19 materials to establish the precision statement of test method E415.
11.02.1998 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D02-1419
An interlaboratory study for test method D6217 was conducted by thirteen laboratories which tested nine test fuels to establish precision.
11.02.1998 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:F07-1003
An interlaboratory study was conducted by twenty laboratories which tested five materials to establish the precision statement of test method F1165.
03.02.1998 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D20-1200
An interlaboratory study was conducted by seven laboratories testing six polyethylene resins to establish a precision statement for test method D1693.
28.01.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D14-1007
An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method D6195.
14.01.1998 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:F23-1003
An interlaboratory study was conducted by six laboratories which tested five randomly drawn samples to establish the precision statement of test method F1819.
14.01.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1445
This research report describes an interlaboratory study for test method D6352 to develop precision statements by testing done on eight samples which were analyzed on three different column liquid phases.
07.01.1998 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:F17-1043
An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for test method F1473.
30.11.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1519
An interlaboratory study was conducted by ten laboratories testing ten samples to establish a precision statement for test method D6729.
20.11.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:F01-1014
An interlaboratory study was conducted by six laboratories testing nine samples to establish a precision statement for test method F996.
17.11.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:G02-1010
Research report G02-1010 describes two interlaboratory studies testing the response of materials to reciprocating sliding motions, one involving dry sliding, and the other involving sliding lubricated with hot mineral oil, in order to establish a precision statement for test method G133.
17.11.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D01-1106
An interlaboratory study was conducted by fifteen laboratories testing three samples to establish a precision and bias statement for test method D6166.
11.11.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E01-1021
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method E1917.
07.11.1997 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D12-1012
An interlaboratory study was conducted by seven laboratories testing seven materials to establish a precision statement for test method D6173.
04.11.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D13-1098
Two interlaboratory studies were conducted to establish precision statements for D5363. ILS A was conducted by five laboratories testing 2 woven fabrics and 3 knit fabrics to determine if significant interlaboratory differences existed when using the BBTM and to determine if the BBTM could separate the fabrics into several different groups or classes. ILS B was conducted by four laboratories testing two fabric samples to determine if significant interlaboratory differences did exist.
27.10.1997 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1414
An interlaboratory study was conducted by nine laboratories testing twelve samples to establish a precision statement for test method D6120.
02.09.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1413
An interlaboratory study was conducted by ten laboratories testing ten liquid waste samples to establish a precision statement for test method D6160.
29.08.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D11-1084
An interlaboratory study was conducted to establish precision statements for ASTM D6147, Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer- Determination of Force Decay (Stress Relaxation) in Compression.
05.08.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:C16-1022
An interlaboratory study was conducted by seven companies testing material from a production run of one product. Each received approximately 1000 pounds of product. A series of three tests were conducted at different weights persq.ft. (.575, 1.150, 1.575). Each weight was blown and measured immediately after three times, and an average thickness was determined to establish a precision statement for Test Method C1374.
01.08.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1520
An interlaboratory study was conducted by 21 laboratories testing samples to establish a precision statement for test method D6733.
01.08.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:E37-1021
An interlaboratory study was conducted in 1988-89 by nine laboratories testing powdered poly(tetrafluoroethylene) using thermogravimetric analyzers to establish a precision statement for test method E1641.
31.07.1997 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D16-1022
An interlaboratory study was conducted by six laboratories testing a single sample to establish a precision statement for test method D6144.
29.07.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1411
An interlaboratory study was conducted by fifteen laboratories testing nine fuel samples to establish a precision statement for test methods D6078 and D6079.
29.07.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1412
An interlaboratory study was conducted by seven laboratories testing fourteen hydrocarbon impurities in ethylene samples to establish a precision statement for test method D6159.
29.07.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D16-1021
An interlaboratory study was conducted by seven laboratories testing three phenol samples to establish a precision statement for test method D6142.
29.07.1997 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D11-1081
An interlaboratory study was conducted by three laboratories testing five materials to establish a precision statement for test method D6047.
25.07.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E15-1050
An interlaboratory study was conducted by eight laboratories testing hydroxylated compounds to establish a precision statement for test method E1899.
17.07.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1449
An interlaboratory study was conducted by thirteen laboratories testing six lubricating oil samples to establish a precision statement for test method D2711.
03.07.1997 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:F11-1011
An interlaboratory study was conducted by ten laboratories testing carpet cleaners to establish a precision statement for test method F1334.
03.07.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1410
An interlaboratory study was conducted by eighteen laboratories testing eight grease samples to establish a precision statement for test method D5706 and D5707.
02.07.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D11-1079
An interlaboratory study was conducted by sixteen laboratories testing five rubber samples to establish a precision statement for test method D5963.
24.06.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D10-1011
An interlaboratory study was conducted by six laboratories testing resonant responses of a blower to establish a precision statement for test method D3580.
03.06.1997 - PDF - Englisch -
mehr dazu95,55 € -
192,00 €
-
ASTM Research Report RR:F11-1010
An interlaboratory study was conducted by nine laboratories testing carpet cleaners to establish a precision statement for test method F608.
09.05.1997 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D20-1193
An interlaboratory study was conducted by eleven laboratories testing two materials to establish a precision statement for test method D6042.
06.05.1997 - PDF - Englisch -
mehr dazu81,90 € -
192,00 €
-
ASTM Research Report RR:D20-1198
An interlaboratory study was conducted by thirteen laboratories testing three materials to establish a precision statement for the standard specification D1056.
01.05.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D01-1008
An interlaboratory study was conducted by six laboratories, testing three coatings to establish a precision statement for Test Method D3359 Procedures A &, B.
29.04.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D10-1010
An interlaboratory study was conducted by nine laboratories testing 90 samples, ten of each nine strap materials to establish a precision statement for specification D3950.
26.04.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D11-1083
An interlaboratory study was conducted by six laboratories testing two materials to establish a precision statement for test methods D5044 and D5051.
24.04.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1409
An interlaboratory study was conducted by fifteen laboratories testing eight samples to establish a precision statement for test method D2272.
22.04.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D10-1009
An interlaboratory study was conducted by ten laboratories testing three materials to establish a precision statement for specification D3953.
22.04.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D19-1157
An interlaboratory study was conducted by thirteen laboratories tested 21-32 sample spike solutions to establish a precision statement for test method D5673.
15.04.1997 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D19-1156
An interlaboratory study was conducted by seven laboratories testing four carbon samples to establish a precision statement for test method D5904.
01.04.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D30-1003
Four laboratories participated in the ruggedness testing portion of this investigation. The ASTM D 3039 Tensile Test method was used to test four composite materials including a glass/epoxy uni-tape, carbon/toughened epoxy uni-tape, aramid/epoxy fabric and a glass/epoxy uni-tape which is believed to be strain rate sensitive. These materials were tested at a variety of different lay-ups and specimen configurations to accomplish the stated objectives. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens tested by their facility. The interlaboratory study portion of this investigation was conducted using the ASTM D3039 Tensile Test method on six composite materials in a variety of lay-up configurations. The materials tested included: IM-6/3501-6 uni-tape, glass/epoxy uni-tape, carbon/toughened epoxy fabric, Toray carbon/epoxy uni-tape, Toho carbon/epoxy uni-tape and glass/polypropylene unitape. An average of five replicates per test condition were tested by the participating laboratories. The number of participating test laboratories ranged from five to nine depending on the material type. Laboratories were requested to provide failure strength, failure strain, chord modulus and failure mode for each of the specimens tested at their facility. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens test by their facility.
01.04.1997 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:E37-1019
An interlaboratory study was conducted by nine laboratories comparing the thermal analyzer clock to a traceable secondary reference time piece of accuracy to establish a precision statement for test method E1860.
26.03.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E37-1018
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method E1858.
26.03.1997 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D02-1408
An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for specification D4171.
25.03.1997 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D20-1195
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method D6099.
25.03.1997 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D16-1020
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test methods D2360 and D5917.
12.03.1997 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:C09-1012
An interlaboratory study was conducted by eleven laboratories testing four concrete samples to establish a precision statement for test method C1084.
05.03.1997 - PDF - Englisch -
mehr dazu63,00 € -
NACE 7K189-1997
Control Factors in Performance Testing of Nonchemical Water Treatment Devices
01.03.1997 - PDF - Englisch -
mehr dazu192,00 € -
NACE 7G181-1997
Investigation of the Effects of Corrosion-Inhibiting Treatments on Mechanical Seals in Recirculating Hot Water Systems
01.03.1997 - PDF - Englisch -
mehr dazu192,00 € -
ASTM Research Report RR:D19-1155
An interlaboratory study was conducted by sixteen analysts in nine laboratories testing five samples to establish a precision statement for test method D5916.
09.02.1997 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D05-1020
An interlaboratory study was conducted by twelve laboratories testing twelve coal samples to establish a precision statement for test methods D5865, D3173, D3174 and D4239.
05.02.1997 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D06-1003
An interlaboratory study was conducted in June/July 1996 by twenty laboratories testing six grades of materials to establish a precision statement for D5725.
05.02.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D02-1406
An interlaboratory study was conducted by 27 laboratories testing nine samples to establish a precision statement for test method D2887.
24.01.1997 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D11-1082
An interlaboratory study was conducted by six laboratories testing six polymer grade samples to establish a precision statement for test method D6049.
14.01.1997 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D15-1019
An interlaboratory study was conducted by twelve laboratories testing six samples to establish a precision statement for test method D5828.
08.01.1997 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1404
An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D4684.
06.01.1997 - PDF - Englisch -
mehr dazu81,90 € -
102,00 €
-
ASTM Research Report RR:D05-1035
An interlaboratory study was conducted by fourteen laboratories which tested fifteen materials to establish the precision and bias statement of test method D6349.
01.01.1997 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E28-1016
An interlaboratory study was conducted by eight laboratories testing two steel materials to establish a precision statement for test method E517.
27.12.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D19-1160
An interlaboratory study was conducted by seventeen laboratories testing six samples to establish a precision statement for test method D6071.
27.12.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E01-1018
An interlaboratory study was conducted by seventeen laboratories testing seven samples to establish a precision statement for test method E1852.
17.12.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E01-1019
An interlaboratory study was conducted by testing the procedure of analysis of Nickel Alloys by flame atomic absorption spectrometry for a series of 8 elements to establish a precision statement for test method E1835.
09.12.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E01-1017
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method E1834.
09.12.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:E37-1017
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method E1582.
08.11.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E01-1020
An interlaboratory study was conducted by thirty-one laboratories testing eight samples to establish a precision statement for test method E1898.
04.11.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1403
An interlaboratory study was conducted by eleven laboratories testing five samples to establish a precision statement for test method D5763.
04.11.1996 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:C28-1003
An interlaboratory study was conducted by eleven laboratories testing samples of steel, Tungsten Carbide, and Silicon Nitride to establish a precision statement for test method C1326.
24.09.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:C28-1001
An interlaboratory study was conducted by three individuals testing three machines to establish a precision statement for test method C1161.
24.09.1996 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:C28-1002
An interlaboratory study was conducted by seventeen laboratories to develop precision statements for ASTM test method C1322.
24.09.1996 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:F01-1013
An interlaboratory study was conducted by eight laboratories testing three materials to establish a precision statement for test method F1593.
29.08.1996 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D24-1031
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method D3192.
26.08.1996 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D24-1030
An interlaboratory study was conducted by eight laboratories testing four materials to establish a precision statement for test method D3191.
26.08.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:C28-1000
An interlaboratory study was conducted by eight laboratories testing four advanced ceramic samples to establish a precision statement for test method C1259.
19.08.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D01-1101
An interlaboratory study was conducted by nine laboratories testing three samples to establish a precision and bias statement for test method D5974.
15.08.1996 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D20-1190
An interlaboratory study was conducted by seven laboratories testing a polyisocyanurate and a polystyrene sample to establish a precision statement for test method D2842.
09.08.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D19-1174
An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method D6239.
12.07.1996 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:F07-1002
An interlaboratory study was conducted by three laboratories testing for windscreen positioning and angular deviation to establish a precision statement for test method F801.
02.07.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:G04-1001
An interlaboratory study was conducted by six laboratories testing three cleaning materials to establish a precision statement for test method G122.
01.07.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D01-1102
An interlaboratory study was conducted by seventeen laboratories testing three samples to establish a precision and bias statement for test method D1065.
21.06.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:F08-1003
An interlaboratory study was conducted by six laboratories testing six samples to establish a precision statement for test method F1702.
12.06.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:G02-1008
An interlaboratory study was conducted by forty laboratories testing samples to establish a precision statement for steel versus steel ball wear scar diameter results and steel versus steel ball friction results in test method G99.
04.06.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1391
There are two laboratory tests available for the determination of High Temperature Deposits. The tests are the Thermo-Oxidation Engine Oil Simulation Test (TEOST) and the Hot Tube Test (HTT). This report describes three interlaboratory studies that were conducted to determine the precision of the methods. The first study is a preliminary (first) round robin held in February 1995, on the TEOST. Three reference oils were analyzed by seven participating laboratories. The second study is a full (second) round robin on the TEOST held in June 1995. Nine laboratories participated by analyzing seven reference oils. The third study in this report is a round robin on the HTT. The same seven reference oils used in the second TEOST round robin were analyzed by ten participating laboratories.
03.06.1996 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D02-1388
An interlaboratory study was conducted by sixteen laboratories testing thirteen samples to establish a precision statement for test method D5186.
30.05.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D34-1011
An interlaboratory study was conducted by eight participants testing a sand and an organic soil spiked with various concentrations of diesel fuel to establish a precision statement for test method D5831.
21.05.1996 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D02-1387
An interlaboratory study was conducted by thirteen laboratories testing four hydrocarbon samples to establish a precision statement for test method D4052.
20.05.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E15-1048
An interlaboratory study was conducted by eight laboratories testing a single sample of acrylonitrile to establish a precision statement for test method E1784.
15.05.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E15-1049
An interlaboratory study was conducted by seven laboratories testing two samples of acrylonitrile to establish a precision statement for test method E1788.
15.05.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D05-1019
An Interlaboratory Study was conducted to establish precision statements for ASTM D5515, Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer.
09.05.1996 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D20-1188
An interlaboratory study was conducted by seven laboratories testing polyamide 66 material to establish a precision statement for test method D3801.
07.05.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D35-1003
An interlaboratory study was conducted by nine laboratories testing four samples to establish a precision statement for test method D5885.
17.04.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E15-1045
An interlaboratory study was conducted by a single laboratory testing three streams of liquid chlorine to establish a precision statement for test method E1786.
12.04.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D28-1005
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D2854.
08.04.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:E15-1044
An interlaboratory study was conducted by nine laboratories testing one sample of di-tert-butyl-peroxide to establish the precision statement for test method E475.
22.03.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1385
An interlaboratory study was conducted by thirty-five laboratories testing fourteen samples to establish a precision statement for test methods D5091, D4305, and D5972.
20.03.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:F06-1003
An interlaboratory study was conducted by six laboratories testing three categories of unprinted resilient sheet flooring which contained low, medium and high levels of stabilizers to establish precision statements for test methods F1515 and F1514.
18.03.1996 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D02-1384
An interlaboratory study was conducted by five laboratories testing nine fuel samples to establish a precision statement for test method D5452.
08.03.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1405
An interlaboratory study was conducted by a single laboratory testing a single sample containing a nominal sulfur concentration of 0.2 ppm to establish a precision statement for test method D4045.
29.02.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1382
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method D5769.
16.02.1996 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D20-1192
An interlaboratory study was conducted by ten laboratories testing nine samples to establish a precision statement for test method D5017. An earlier round robin, conducted by ten laboratories testing six samples is also included in this report.
13.02.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D11-1078
This report describes an interlaboratory study to establish precision statements for ASTM D5902. A test program was completed to measure the residual unsaturation in HNBR by iodine number and infrared spectrophotometry. This report deals with the iodine number approach only. Seven laboratories tested three different HNBR samples with unsaturation levels of <1%, approximately 2% and approximately 5% were used. The iodine results were measured in duplicate on two difference days.
07.02.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D11-1080
An interlaboratory study was conducted to establish precision statements for ASTM D3403, Standard Test Methods for Rubber- Evaluation of IR (Isoprene Rubber).
05.02.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1379
An interlaboratory study was conducted by one laboratory testing oil samples to establish a precision statement for test method D4485.
29.01.1996 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D01-1103
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test method D6038.
22.01.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C24-1053
An interlaboratory study was conducted by four laboratories testing three samples to establish a precision statement for test method C1501.
18.01.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D01-1097
An interlaboratory study was conducted by five laboratories testing three ink samples to establish a precision and bias statement for test method D5909.
11.01.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D01-1096
An interlaboratory study was conducted by five laboratories testing five samples to establish a precision statement for test method D4017.
11.01.1996 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:F23-1002
An interlaboratory study was conducted by six laboratories testing nine samples to establish a precision statement for test method F1670 and F1671.
09.01.1996 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D02-1378
An interlaboratory study was conducted by eight laboratories testing thirteen oil samples to establish a precision statement for test method D5481, D4683, and D4741.
05.01.1996 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D04-1012
An interlaboratory study was conducted by twelve laboratories testing samples of aggregate and asphalt cement to establish a precision statement for test method D5581.
01.01.1996 - PDF - Englisch -
mehr dazu56,70 € -
102,00 €
-
ASTM Research Report RR:D02-1375
An interlaboratory study was conducted by five laboratories testing seventeen samples to establish a precision statement for test method D1840.
18.12.1995 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:E15-1043
A round robin was conducted by fourteen laboratories testing two samples to establish precision
13.12.1995 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D02-1374
An interlaboratory study was conducted by eleven laboratories testing thirty-six samples to establish a precision statement for test method D5845.
11.12.1995 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D02-1373
An interlaboratory study was conducted by twenty-nine laboratories testing ten samples on various machines to establish a precision statement for test methods D5771, D5772, and D5773.
13.11.1995 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1370
An interlaboratory study was conducted by eleven laboratories testing fifteen samples to establish a precision statement for test method D5762.
30.10.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:E15-1046
Interlaboratory Study to Establish Precision Statements for ASTM E224, Tests for Analysis of Hydrochloric Acid
13.10.1995 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D02-1371
An interlaboratory study was conducted by eleven laboratories testing nine samples to establish a precision statement for test method D5853.
06.10.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1368
An interlaboratory study was conducted by ten laboratories testing eight samples to establish a precision statement for test method D5384.
21.09.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:C08-1012
Interlaboratory Study to Establish Precision Statements for ASTM C831, Tests for Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
19.09.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D01-1085
Interlaboratory Study to Establish Precision Statements for ASTM D5910, Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
09.09.1995 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:S15-1010
An interlaboratory study was conducted by nineteen laboratories testing four samples to establish precision statements for test methods D92, D93, D56 and D3828.
14.08.1995 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D02-1358
An interlaboratory study was conducted by eleven laboratories testing eight samples to establish a precision statement for test method D5705.
09.05.1995 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D04-1007
An Interlaboratory Study was conducted to establish precision statements for ASTM D1188, Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens.
26.04.1995 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D04-1008
Data from the AASHTO Materials Reference Laboratory (AMRL) proficiency sample data base was analyzed to develop better estimates of test precision for three tests on asphalt recovered from solution by Abson Method: Penetration at 25�,C (77�,F), Kinematic Viscosity at 135�,C (275�, F), and Viscosity at 60�,C (140�,F). This information will serve users of ASTM D1856, Standard Test Method for Recovery of Asphalt from Solution by Abson Method.
26.04.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1352
An interlaboratory study was conducted by five laboratories testing six samples to establish a precision statement for test method D5183.
28.03.1995 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D01-1090
Interlaboratory Study to Establish Precision Statements for ASTM D3257, Test for Aromatics in Mineral Spirits by Gas Chromatography
01.03.1995 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:C16-1019
An interlaboratory study was conducted by eight labotories testing two samples to establish precision statements for ASTM C335.
15.02.1995 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:E05-0001
An interlaboratory study was conducted by eleven laboratories testing six test materials to establish a precision statement fro test method E84.
01.11.1994 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:D02-1337
An interlaboratory study was conducted by eight laboratories testing eight samples to establish a precision statement for test method D5621.
09.09.1994 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C01-1004
An interlaboratory study was conducted by thirteen laboratories testing twelve cement samples to establish a precision statement for test method C452.
25.08.1994 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D02-1334
An interlaboratory study was conducted by twenty-five laboratories testing five samples to establish a precision statement for test method D445.
11.08.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1332
An interlaboratory study was conducted by nineteen laboratories testing fourteen samples to establish a precision statement for test method D445.
11.08.1994 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D02-1333
An interlaboratory study was conducted by fourteen laboratories testing eight samples to establish a precision statement for test method D445.
11.08.1994 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D02-1331
An interlaboratory study was conducted by twenty-one laboratories testing six samples to establish a precision statement for test method D445.
11.08.1994 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:C09-1008
The purpose of this research report is to report the results of an interlaboratory study (ILS) conducted in 1987-89. During the ILS, seven laboratories tested four samples to establish a precision statement for ASTM C311.
06.06.1994 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:C01-1003
An interlaboratory study was conducted by ten laboratories testing five cement samples to establish a precision statement for test method C1012.
17.05.1994 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:C24-1045
An interlaboratory study was conducted by four laboratories, testing four sealants to establish a precision statement for Test Method C1246.
06.04.1994 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C24-1044
Interlaboratory Study to Establish Precision Statements for ASTM C1241, Test for Volume Shrinkage of Latex Sealants During Cure
06.04.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:C24-1043
An interlaboratory study was conducted by four laboratories, testing four sealants for 6 &, 10 weeks of water immersion on aluminum and concrete substrates to establish a precision statement for Test Method C1247.
05.04.1994 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C24-1037
Interlaboratory Study to Establish Precision Statements for ASTM C1016, Test for Determination of Water Absorption by Sealant Backup (Joint-Filler) Material
18.03.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:C24-1038
Interlaboratory Study to Establish Precision Statements for ASTM C1253, Test for Determining the Outgassing Potential of Sealant Backing
18.03.1994 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1325
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test methods D2156 and DD2157.
09.03.1994 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C24-1039
Interlaboratory Study to Establish Precision Statements for ASTM D2202, Test for Slump of Sealants
02.03.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D02-1266
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method D5501.
24.02.1994 - PDF - Englisch -
mehr dazu89,25 € -
ASTM Research Report RR:D11-1069
An interlaboratory study was conducted by nine laboratories testing six oils to replace ASTM #2 and #3 oils in test method D471.
17.02.1994 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:C26-1005
Interlaboratory Study to Establish Precision Statements for ASTM C1108, Test for Plutonium by Controlled-Potential Coulometry
17.02.1994 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:D11-1068
An interlaboratory study was run to establish the precision of the D3188-91 test methods. Samples of various IIR were sent to various laboratories for mixing and testing.
04.02.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D04-1009
An Interlaboratory Study was conducted to establish precision statements for ASTM D3042, Test for Insoluble Residue in Carbonate Aggregates.
26.01.1994 - PDF - Englisch -
mehr dazu115,50 € -
ASTM Research Report RR:E01-1010
Interlaboratory Study to Establish Precision Statements for ASTM E1335, Test for Determination of Gold in Bullion by Cupellation (Method A)
14.01.1994 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:E01-1011
Interlaboratory Study to Establish Precision Statements for ASTM E1335, Test for Determination of Gold in Bullion by Cupellation (Method B)
14.01.1994 - PDF - Englisch -
mehr dazu56,70 € -
102,00 €
-
102,00 €
-
102,00 €
-
102,00 €
-
102,00 €
-
ASTM Research Report RR:D02-1316
An interlaboratory study was conducted by five laboratories testing seven samples to establish a precision statement for test method D5442. The seven samples chosen for the round robin included waxes which were primarily paraffin, mixtures of paraffin and microcrystaline and one sample containing oil.
28.12.1993 - PDF - Englisch -
mehr dazu95,55 € -
ASTM Research Report RR:D34-1009
Interlaboratory Study to Establish Precision Statements for ASTM D5530, Test for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
28.12.1993 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E01-1008
Interlaboratory Study to Establish Precision Statements for ASTM E1569, Test for Determination of Oxygen 11 in Tantalum Powder
16.12.1993 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:E01-1007
Interlaboratory Study to Establish Precision Statements for ASTM E1568, Test for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
27.10.1993 - PDF - Englisch -
mehr dazu102,90 € -
ASTM Research Report RR:D11-1066
An interlaboratory study was run to establish the precision of the D3194-84 test method. Samples of various rubbers were sent to various laboratories for testing.
20.10.1993 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D11-1065
An interlaboratory study was conducted to establish precision statements for ASTM D3900, Tests for Rubber. Raw- Determination of Ethylene units in EPM (Ethylene-Propylene Gopolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers).
10.08.1993 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D20-1180
An interlaboratory study was conducted by laboratories testing eight samples which were composed of two different base materials to establish a precision statement for test method D1003.
04.08.1993 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D01-1082
Interlaboratory Study to Establish Precision Statements for ASTM D5401, Test for Evaluating Clear Water Repellent Coatings on Wood
15.07.1993 - PDF - Englisch -
mehr dazu56,70 € -
ASTM Research Report RR:D10-1007
Standard Test Method D2658-91 describes the use of a box gage caliper set for measuring inside dimensions of fiberboard boxes. The inter-laboratory test study was set up to determine the precision of test measurements (repeatability within a laboratory and reproducibility between laboratories) by measuring fiberboard boxes at ten laboratories.
01.07.1993 - PDF - Englisch -
mehr dazu81,90 € -
ASTM Research Report RR:D02-1307
An interlaboratory study was conducted by laboratories which tested samples of fuel to establish the precision and bias statement for test method D5453.
22.06.1993 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:C16-1016
An interlaboratory comparison was undertaken by the ASTM Task Group responsible for C167, Standard Test Methods for Thickness and Density of Blanket or Baty Insulations. The purpose of this study was two-fold: determination of the most appropriate batt selection method and the development of a Precision and Bias statement. A pilot study revealed the need to revise the current batt selection technique for assessing the average recovered thickness for a package. This technique was shown to be a consistent underpredictor of package thickness, due to an overemphasis on pieces close to the outside edges of a package. The effect of end-compression was cited in the study as one which plays a significant role in the accuracy of a selection method. While the current ASTM selection method overaccounts for this phenomena by selecting the two end pieces as part of the 5-batt test sample, the previous study also showed that it is also possible to underaccount for end-compression and over-predict the average package thickness.
10.06.1993 - PDF - Englisch -
mehr dazu63,00 € -
ASTM Research Report RR:S15-1008
An interlaboratory study was conducted by twenty-five laboratories testing seven samples to establish precision statements for test methods D92 and D93.
27.05.1993 - PDF - Englisch -
mehr dazu63,00 €