AWS B2.1-8-214:2001(R2012)

AWS B2.1-8-214:2001(R2012)

Standard Welding Procedure Specification(WPS) for, Gas Tungsten Arc Welding Followed By Shielded Metal Arc Welding of Austenitic Stainless Steel(M-8/P-8/S-8, Group 1), 1/8 Through 1-1/2 Inch Thick, Er3xx and E3xx-Xx, As-Welded Condition, Primarily Pipe Appl

509,22 €
Benachrichtigen Sie mich , wenn das Produkt Nachrichten

Details

This standard contains the essential welding variables for austenitic stainless steel in the thickness range of 1/8 through 1-1/2 inch, using manual gas tungsten arc welding followed by shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for fillet and groove welds. This SWPS was developed primarily for pipe applications..
Scope : The data to support this Standard Welding Procedure Specification (SWPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This SWPS is not valid using conditions and variables outside the ranges listed. The American Welding Society (AWS) considers that this SWPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this SWPS.

Zusätzliche Information

Autor American Welding Society (AWS)
Veröffentlicht von AWS
Document type Normen
Datum der Bestätigung 2012-01-01
Ausgabe 3
ICS 25.160.10 : Schweißverfahren
Seitenzahl 21
Ersetzt AWS B2.1-8-214:2000
Gewicht(kg.) 0.1357
Schlagwort B2.1-8-214, Reference Materials, Gas Tungsten Arc Welding, Shielded Metal Arc Welding, Austenitic Stainless Steel, (M-8/P-8/S-8, Group 1), As-Welded Condition, Primarily Pipe Applications