SAE J 1926/3:2023-05-10

SAE J 1926/3:2023-05-10

Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends

Disponibilité: En stock.

93,00 €

Détails

This part of SAE J1926 specifies dimensions, performance requirements, and test procedures for adjustable and nonadjustable light-duty (L series) stud ends with ASME B1.1 threads for use in fluid power and general applications and the O-rings used with them.
Stud ends in accordance with this part of SAE J1926 may be used at working pressures up to 35 MPa for nonadjustable and adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.
For threaded ports and stud end specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new design in hydraulic fluid power applications.
Conformance to the dimensional information does not guarantee rated performance. Each manufacturer shall perform testing according to the specification contained in this document to ensure that components made to this document comply with the performance rating.
Appendices A and B of this document are informative.

Informations supplémentaires

Auteur Society of Automotive Engineers International (SAE)
Comité Hydraulic Tube Fittings Committee
Edité par SAE
Type de document Norme
ICS 23.100.60 : Filtres, dispositifs d'étanchéité et contamination des fluides
43.040.40 : Systèmes de freinage
Nombre de pages 13
Remplace SAE J 1926/3:2016-09-09
Historique SAE J 1926/3:2016-09-09,SAE J 1926/3:2010-03-12,SAE J 1926/3:2006-10-04,SAE J 1926/3:1993-03-01
Mot-clé SAE 19263,SAE J1926/3,SAE J1926/3,SAE J 1926/3