SAE J 1926/1:2023-01-17

SAE J 1926/1:2023-01-17

Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing

Disponibilité: En stock.

87,00 €

Détails

This part of SAE J1926 specifies dimensions for fluid power and general use ports with inch threads in accordance with ASME B1.1 for use with adjustable and nonadjustable stud ends and plugs shown in SAE J1926-2, SAE J1926-3, and SAE J1926-4.
Ports in accordance with this part of SAE J1926 may be used at working pressures up to 63 MPa for nonadjustable stud ends and up to 40 MPa for adjustable stud ends. The permissible working pressure depends upon materials, design, working conditions, application, etc.
For threaded ports and stud ends specified in new designs for hydraulic fluid power applications, only ISO 6149 shall be used. Threaded ports and stud ends in accordance with ISO 1179, ISO 9974, and ISO 11926 shall not be used for new designs in hydraulic fluid power applications.

Informations supplémentaires

Auteur Society of Automotive Engineers International (SAE)
Comité Hydraulic Tube Fittings Committee
Edité par SAE
Type de document Norme
ICS 23.100.60 : Filtres, dispositifs d'étanchéité et contamination des fluides
43.040.40 : Systèmes de freinage
Nombre de pages 6
Remplace SAE J 1926/1:2016-09-09
Historique SAE J 1926/1:2016-09-09,SAE J 1926/1:2010-02-15,SAE J 1926/1:2006-10-04,SAE J 1926/1:1993-03-01
Mot-clé SAE 19261,SAE J1926/1,SAE J1926/1,SAE J 1926/1