ASTM
-
ASTM Research Report RR:D02-1787
An interlaboratory study was conducted by forty-one laboratories testing twenty-three samples to establish a precision statement for test method D445.
15/12/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1788
An interlaboratory study was conducted to establish the precision of 40 �,C and 100 �,C kinematic viscosity measured using the manual method in D445 for base oils and formulated oils.
15/12/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1789
Interlaboratory Study to Determine Suitability of ASTM D445-11a Manual Method for Use with Diesel Fuels, Biodiesel Fuels and Biodiesel Fuel Blends
15/12/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1790
An interlaboratory study was conducted by forty laboratories testing seven samples to establish a precision statement for test method D445.
15/12/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1795
An interlaboratory study was conducted by twelve laboratories testing twenty-seven samples to establish a precision statement for test method D7861.
15/12/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1796
An interlaboratory study was conducted by seventeen laboratories testing twelve samples to establish a precision statement for test method D6423.
15/12/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1797
Interlaboratory Study to Establish Precision Statements for ASTM D7945, Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer
15/12/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:C07-1009
An interlaboratory study was conducted by seven laboratories testing eight samples to establish a precision statement for C110-14.
01/12/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1791
An interlaboratory study was conducted by twelve laboratories testing eight samples to establish a precision statement for test method D2532.
01/12/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1792
Interlaboratory Study to Establish Precision Statements for ASTM D7972-14, Test Method for Three-Point Bend Strength of Carbon and Graphite
01/12/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1793
Test Method D7344 for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method) was one of the test methods that also participated in an interlaboratory study to estimate the precision of D1160 Distillation of Petroleum Products at Reduced Pressure when applied to biodiesel FAME (Fatty Acid Methyl Esters). This study ILS #472 is to develop the precision of D7344, and relative bias to D1160 then for D7344 when applied to biodiesel FAME (Fatty Acid Methyl Esters).
01/12/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1794
Test Method D7345 for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method) was one of the test methods that also participated in an interlaboratory study to estimate the precision of D1160 Distillation of Petroleum Products at Reduced Pressure when applied to biodiesel FAME (Fatty Acid Methyl Esters) . This study ILS #473 is to develop the precision of D7345, and relative bias to D1160 then for D7345 when applied to biodiesel FAME (Fatty Acid Methyl Esters).
01/12/2014 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D16-1054
An intralaboratory study was conducted to Establish Repeatability Statement for ASTM D7977-14, Test Method For Polymer content of AMS (a-Methylstyrene)
01/12/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E06-1005
An interlaboratory study was conducted by one laboratory testing fourteen samples to establish a precision statement for test method E2141.
01/12/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D32-1042
An interlaboratory study was conducted by nine laboratories testing two samples to establish a precision statement for test method D7964.
01/11/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:B02-1000
The precision of this test method is based on an interlaboratory study of ASTM B982, Standard Test Method for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis , conducted in 2010. Eleven laboratories participated in this study. Each of the labs was asked to report five replicate test results on a total of four materials. Every �,test result�, reported represents a single determination or measurement. Practice E691 was followed for the design and analysis of the data, the details are given in ASTM Research Report No. B02-1000.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:B02-1001
The precision of this test method is based on an interlaboratory study of ASTM B982- New Specification for Sampling of Lead and Lead Alloys for Optical Emission, conducted in 2010. Each of ten laboratories tested a single material for nine elements. Every ",test result", represents an individual determination, and all participants were asked to report five test results for each element measured. Except for the testing of only a single type of material, Practice E 691 was followed for the study design and analysis of the data, the details are given in ASTM Research Report No. B02-1001.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1045
This research report describes a Ruggedness Study that was conducted by one laboratory to evaluate the influence of seven factors on C39/C39M compressive strength and density values made by C1435/C1435M.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1783
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method D7525.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1784
An interlaboratory study was conducted by nine laboratories testing twelve samples to establish a precision statement for test method D6667.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1785
An interlaboratory study was conducted by thirty-four laboratories testing ten samples to establish a precision statement for test method D5800.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1786
An interlaboratory study was conducted by six laboratories testing eight samples to establish a precision statement for test method D3241.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D10-1016
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test method D3103.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D10-1017
An interlaboratory study was conducted by two laboratories testing two samples to establish a precision statement for test method D7860.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D30-1006
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D7905.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F04-1014
An interlaboratory study was conducted by thirteen laboratories testing one sample to establish a precision statement for test method F2077.
01/10/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:B09-1021
An interlaboratory study was conducted by one laboratory testing two samples to establish a precision statement for test method B931.
01/09/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:B09-1022
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method B796.
01/09/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C08-1024
An interlaboratory study was conducted by five laboratories testing three samples to establish a precision statement for test method C179.
01/09/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D05-1044
An interlaboratory study was conducted by sixteen laboratories testing twenty samples to establish a precision statement for test method D5341.
01/09/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1263
An interlaboratory study was conducted by three laboratories testing six samples to establish a precision statement for test method D7823.
01/08/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D30-1007
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6641.
01/08/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D35-1019
An interlaboratory study was conducted by five laboratories testing three samples to establish a precision statement for test method D6575.
01/08/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D35-1020
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method D6525.
01/08/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:G02-1014
Interlaboratory Study to Establish Precision Statements for ASTM G211-14, Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
15/07/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:C15-1000
An interlaboratory study was conducted by one laboratory testing forty-two samples to establish a precision statement for test method C1781.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C15-1001
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method C67.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1779
An interlaboratory study was conducted by eleven laboratories testing eleven samples to establish a precision statement for test method D7946.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1780
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method D445.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D08-1017
An interlaboratory study was conducted by ten laboratories testing three samples to establish a precision statement for test method D36/D36M.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D16-1051
An interlaboratory study was conducted by five laboratories testing four samples to establish a precision statement for test method D2232.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F23-1010
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method F2961.
01/07/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D01-1178
Interlaboratory Study to Establish Precision Statements for ASTM D6886-14, Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
15/06/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C16-1042
An interlaboratory study was conducted by one laboratory testing three samples to establish a precision statement for test method C1763.
01/05/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1773
An interlaboratory study was conducted by twenty-six laboratories testing twelve samples to establish a precision statement for test method D7042.
01/05/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1778
An Interlaboratory Study was conducted to establish a precision statement for D7111, Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
01/05/2014 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D05-1043
An interlaboratory study was conducted by twenty-eight laboratories testing six samples to establish a precision statement for test method D7708.
01/05/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F08-1013
An interlaboratory study was conducted by six laboratories testing eighty-four samples to establish a precision statement for test method F1887.
01/05/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:B09-1020
An interlaboratory study was conducted by two laboratories testing three samples to establish a precision statement for test method B527.
01/04/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C09-1043
A study was conducted by one laboratory to analyze the effects of seven factors on the precision of C1170 and establish a precision statement for the standard. 48 tests were conducted with replicate tests conducted on 24 different RCC mixtures.
01/04/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:C09-1044
An interlaboratory study was conducted by eight laboratories testing two samples to establish a precision statement for test method C567.
01/04/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D31-1021
Interlaboratory Study to Establish Precision Statements for ASTM D6657-2014, Test Method for pH of Wet Blue
01/04/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D31-1022
An interlaboratory study was conducted by nine laboratories testing sixteen samples to establish a precision statement for test method D7674.
01/04/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E06-1004
An interlaboratory study was conducted by one laboratory submitting a total of ten test results for Argon concentration to establish a precision statement for test method E2269.
01/04/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D15-1034
An intralaboratory study was conducted by one laboratory testing five samples to establish a precision statement for D7896.
01/02/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E35-1009
An interlaboratory study was conducted by seven laboratories testing four different materials for four different chemicals (five including isomers) to establish a precision statement for test method E2945.
01/02/2014 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:E54-1000
An interlaboratory study was conducted by eight laboratories that tested two same-model detectors on three separate days using one common analyte (an explosive simulant) distributed at nine different concentrations to establish a precision statement for test method E2677.
01/02/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D22-1035
An interlaboratory study was conducted by twenty laboratories testing four samples to establish a precision statement for test method D7439.
15/01/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:F11-1021
An interlaboratory study was conducted by three laboratories testing a single type of vacuum cleaner by two different analytical methods to establish a precision statement for test method F2826.
15/01/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:A05-1005
An interlaboratory study was conducted by eight laboratories testing twenty known NIST samples of varying thicknesses to establish a precision statement for test method A1073.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1176
An interlaboratory study was conducted by ten laboratories testing three different materials using two ink stain types in multiple colors to establish a precision statement for test method D7514.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1177
An interlaboratory study was conducted by eleven laboratories testing five different property types to establish a precision statement for test method D4417.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1770
An interlaboratory study was conducted by sixteen laboratories testing thirteen samples of LPG in duplicate to establish a precision statement for test method D2163.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1772
An interlaboratory study was conducted by two laboratories testing forty-three (39 gasoline, 3 pure compounds and 1 blend of two pure compounds) samples of varying targeted results to establish a precision statement for test method D5188.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D20-1262
An interlaboratory study was conducted by ten laboratories testing three samples of varying targeted results to establish a precision statement for test method D3575.
01/01/2014 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:F02-1035
Interlaboratory Study to Establish Precision Statements for ASTM F2476-13, Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co2TR) Through Barrier Materials Using An Infrared Detector
15/12/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1769
An interlaboratory study was conducted by thirteen laboratories testing 23 samples of varying targeted results to establish a precision statement for test method D7873.
01/12/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D04-1040
An interlaboratory study was conducted by six laboratories. Each of the labs was given 5 SGC pills that would yield 10 test specimens. Each of the labs was instructed to report a minimum of 8 replicate test results for three different test parameters to establish a precision statement for test method D7313.
01/12/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D20-1261
An interlaboratory study was conducted by nine laboratories, testing three materials to establish a precision statement for test method D6576.
15/11/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F02-1034
Interlaboratory Study to Establish Precision Statements for ASTM F3039-13, Test Method For Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
15/11/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:A01-1003
An interlaboratory study was conducted by three laboratories testing five samples of varying targeted results to establish a precision statement for test method A1038.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C16-1041
An interlaboratory study to establish precision statements for C1104 was conducted by six laboratories, testing three types of fiber insulation. Every analyst was instructed to report triplicate test results in this study.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1144
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method D6132.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1173
An interlaboratory study was conducted by four laboratories testing four paints for porosity to establish a precision statement for test method D6583.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D01-1174
An interlaboratory study was conducted by ten laboratories testing one topcoat and three different primers for enamel holdout to establish precision statements for D7786. Every ",test result", represents an individual determination, and all participants were asked to report five replicate ",test results", for each analysis.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1175
An interlaboratory study was conducted by six laboratories testing eight samples of varying targeted results to establish a precision statement for test method D4446.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D09-1038
An interlaboratory study was conducted by two laboratories testing three samples of commercially available alliance separators varying targeted results to establish a precision statement for test method D7148.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D20-1260
An interlaboratory study was conducted by one laboratory testing six samples of varying targeted results to establish a precision statement for test method D1929.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:E04-1008
An interlaboratory study was conducted by seventeen laboratories testing one material to establish a precision statement for test method E2627.
01/11/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E29-1001
Interlaboratory Study to Establish Precision Statements for ASTM E2427-13, Test Method for Acceptance by Performance Testing for Sieves
01/11/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F02-1034
Interlaboratory Study to Establish Precision Statements for ASTM F3039-13, Test Method For Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
01/11/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D05-1046
An interlaboratory study was conducted by eight laboratories testing twenty samples to establish a precision statement for test method D5373.
15/10/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1767
ASTM D4683-10, Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 degrees C [ILS No. 848] ASTM D5481-10, Test Method for Measuring Apparent Viscosity at High- Temperature and High-Shear Rate by Multicell Capillary Viscometer [ILS No. 849] ASTM D4741-12, Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer [ILS No. 850]
10/10/2013 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:B09-1019
An interlaboratory study was conducted by one laboratory testing one material for alloy contamination and one material for iron contamination to establish a precision statement for test method B795. The laboratory reported fifteen replicate test results for each analysis.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C14-1006
An interlaboratory study was conducted by six laboratories testing five samples of varying targeted results to establish a precision statement for test method F218.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1172
An interlaboratory study was conducted by eight laboratories testing four samples of varying targeted results to establish a precision statement for test method D7855/D7855M.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1766
An interlaboratory study was conducted by ten laboratories testing eleven types of Biodiesel (FAME) used to establish a precision statement for test method D1160.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D05-1042
Interlaboratory Study to Establish Precision Statements for ASTM D4239-13, Test Methods for Sulfur in the Analysis Sample of Coal and Coke Using High- Temperature Tube Furnace Combustion
01/10/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E35-1008
An interlaboratory study was conducted by eight laboratories testing three samples of varying targeted results to establish a precision statement for test method E2871.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:F02-1036
An interlaboratory study was conducted by twelve laboratories testing seven samples to establish a precision statement for test method F1249.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F02-1037
An interlaboratory study was conducted by eight laboratories testing seven samples to establish a precision statement for test method E398.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F27-1000
An interlaboratory study was conducted by one laboratory testing seven different types of snowboards to establish a precision statement for test method F3030.
01/10/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1765
An interlaboratory study was conducted by twelve laboratories testing 24 sulfur containing materials of varying targeted results used to establish a precision statement for test method D7039.
15/09/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:C08-1023
An interlaboratory study was conducted by five laboratories testing two samples of varying targeted results to establish a precision statement for test method C1445.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1775
An interlaboratory study was conducted by ten laboratories testing twenty-six samples to establish a precision statement for test method D7279.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D20-1258
An interlaboratory study was conducted by one laboratory testing two insulating materials in duplicate to establish a precision statement for test method D1822.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D20-1259
An interlaboratory study was conducted by eight laboratories testing ten samples of varying targeted results to establish a precision statement for test method D1822.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D34-1019
An interlaboratory study was conducted by three laboratories. A total of 68 samples from six different rock types (lithologies) were tested to establish a precision statement for test method D5744.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:E37-1043
An interlaboratory study was conducted by four laboratories using the Flash Method for the measurement of thermal diffusivity using uranium dioxide (UO2) to establish a precision statement for test method E1461.
01/09/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1049
An interlaboratory study was conducted by one laboratory that tested one PTA sample and one qualified terephthalic acid (QTA) sample for 4-CBA and p-TOL which was used to establish a precision statement for test method D7881.
15/08/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1050
An interlaboratory study was conducted by one laboratory that tested one PTA sample and one qualified terephthalic acid (QTA) sample used to establish a precision statement for test method D7882.
15/08/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1047
An interlaboratory study was conducted by one laboratory testing 1 PTA sample and 1 QTA (Qualified Terephthalic Acid) sample used to establish a precision statement for test method D7883.
01/08/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D16-1048
An interlaboratory study was conducted by one laboratory testing 1 PTA sample and 1 QTA (Qualified Terephthalic Acid) sample used to establish a precision statement for test method D7884.
01/08/2013 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:F02-1033
An interlaboratory study was conducted by three laboratories testing three samples of varying targeted results to establish a precision statement for test method F3004.
01/08/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D13-1137
An interlaboratory study was conducted in 2010 by six laboratories. Each laboratory was asked to report the skew of six different fabrics to determine the precision of ASTM D7811.
01/07/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C01-1013
An interlaboratory study was conducted by thirteen laboratories testing six different types of cement, over seven days, by Method A and Method B to establish a precision statement for test methods C1702.
15/06/2013 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1762
Inter Laboratory Study to Establish a Precision Statement for ASTM D7756-13, Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with liquid, On-Column Injection
15/06/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1763
An interlaboratory study was conducted by seven laboratories testing five materials that measure the concentration of Drag Reducing Additive (DRA) in jet fuel to establish a precision statement for test method D7872.
15/06/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D19-1191
An interlaboratory study was conducted by ten operators in eight laboratories testing six samples of varying targeted results used to establish a precision statement for test method D7284.
15/06/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E01-1120
An interlaboratory study was conducted by eight laboratories testing six samples to establish a precision statement for test method E2371.
15/06/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:E08-1009
Interlaboratory Study to Establish Precision Statements for ASTM E2714-13, Test Method for Creep-Fatigue Testing
15/06/2013 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D01-1170
An interlaboratory study was conducted by eight laboratories, testing three or four different materials on ASTM D6037, Method A. Every ",test result", represents an individual determination, and all participants were asked to report five test results. Unabraded and abraded gloss were measured and reported with both 20°, and 60°, geometry for all samples.
01/06/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D01-1171
An interlaboratory study was conducted by six laboratories. There were six samples of varying targeted results to establish a precision statement for test method D6037.
01/06/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1046
An interlaboratory study was conducted by two laboratories analyzing six samples, three times each establish a precision statement for test method D7871.
01/06/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E27-1007
An interlaboratory study was conducted in 2012 by ten laboratories, testing a single type of food grade starch. Each analyst was asked to report three test results to determine the precision of ASTM E2931.
01/06/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F08-1012
An intralaboratory study was conducted by nine analysts from a single laboratory, measuring the contrast of three different color marking combinations, to establish precision statements for F3022. Each analyst reported three replicate test results for every combination.
01/06/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C11-1002
Interlaboratory Study to Establish Precision Statements for ASTM C474-13, Test Methods for Joint Treatment Materials for Gypsum Board Construction
01/05/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1756
An interlaboratory study was conducted by eleven laboratories, testing fourteen B100 samples of varying targeted results to establish a precision statement for test method D6584.
01/05/2013 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1759
Interlaboratory Study to Establish Precision Statements for ASTM D7319-13, Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Butanol by Direct Injection Suppressed Ion Chromatography
01/05/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1760
This research report was conducted for ASTM method D2887 for Committee D02 and Subcommittee D02.04.0H and the purpose is to determine the values through ILS of reference gas oil lot 2G and is included in Table 3 of D2887. There were 67 participants for the ILS which 35 sets of data were returned for statically analysis. The results are included in this research report.
01/05/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1761
An Interlaboratory Study (ILS 158-WK23046) was conducted to establish a precision statement for D2887-06a (Boiling Range Distribution of Petroleum Fractions by Gas Chromatography) in the Accelerated mode as is described in Appendix X6 ,This mode of operation results in a time savings of 50%. In addition the columns described can be used without dissolving the sample in Carbon Disulfide. Also the samples used for the precision statement included Biodiesel Mixtures in the range from 5% to 20% (B5,B10 and B20). During the balloting of the appendix it was determined that a precision statement would be required in order to validate these new mode of carrying out the method.
01/05/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:E20-1003
An interlaboratory study was conducted by six laboratories, testing three different types of connectors, to establish precision statements for E2820. Every analyst was instructed to report three replicate test results in this study.
01/05/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:G04-1002
An interlaboratory study was conducted by six laboratories. Each laboratory conducted a series of tests on the same non-metallic material (PTFE) to establish a precision statement for test method G0074.
01/05/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1257
An interlaboratory study was conducted by six laboratories testing four different polyurethane materials to establish precision statements for D4890. Every ",test result", represents an individual determination. Each laboratory reported three replicate test results for each material.
01/04/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E01-1119
An interlaboratory study was conducted by seven laboratories testing a set of calibration mixtures and samples of standard calcium carbonate and ferrous sulfate, calibration mixtures (-1.00%, 0%, 0.200%, 1.00%, and 2.00 % calcium carbonate) and test materials (D, L, M, N, O, and P).
01/04/2013 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:E37-1042
An interlaboratory study was conducted by three laboratories analyzing a total of three powdered compounds by three unique methods as part of this study to establish precision statements for E2551. Every test result represents an individual determination, and each lab was asked to report triplicate results for each compound.
01/04/2013 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F40-1002
Interlaboratory Study 609 (originally ILS 208) was conducted in two parts. The first activity was to obtain quantitative results for six glass bead materials to enable the task group to assign reference values using test methods independent of the X-ray fluorescence (XRF) method under development. With reference values, a bias statement can be included in the new standard. The second activity of ILS 609 was conducted to establish a precision and bias statement for the XRF results used to validate F2980 Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence.
15/02/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1169
An interlaboratory study was conducted by eleven laboratories, analyzing materials representing five different property types to establish precision statements. Each ",test result", reported represents an individual determination and the participating labs reported three replicate ",test results", for each material type.
01/02/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D16-1045
An interlaboratory study was conducted by two laboratories analyzing 5 samples, three times each, to establish precision statements for D7266. One laboratory analyzed the samples on two different instruments.
01/02/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:G01-1026
An interlaboratory study was conducted by eight laboratories to establish a precision statement for test method G5. Each laboratory was sent four samples and told to test each sample once in accordance with the Standard G5 potentiodynamic test procedure to give quadruplicate test results from each laboratory.
01/02/2013 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:C01-1012
An interlaboratory study was conducted by ten laboratories, testing a single type of material, to establish a precision statement for C1012. Every analyst was instructed to report triplicate test results in this study.
01/01/2013 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C09-1042
An interlaboratory study was conducted by ten laboratories, testing two gradations of stone to establish a precision statement for test method C535.
15/12/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C16-1040
An interlaboratory study to establish precision statements for E96-12 was conducted by six laboratories, analyzing four different materials. Each ",test result", reported represents an individual determination and all participants reported three replicate test results for every material.
15/12/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1751
An interlaboratory study was conducted to establish precision statements for D7577 in 2011 by seven laboratories, testing ten gasoline mixtures with ratings from 1 to 5. Each ",test result", reported represents an individual determination, and all participants were asked to report duplicate ",test results", for each mixture.
01/12/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1754
Interlaboratory Study to Establish Precision Statements for ASTM D7795-12, New Test Method to Measure Acidity In Ethanol and Ethanol Blends
01/12/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1758
Historically most commercially-available spark-ignition engine fuels have contained no or relatively low concentrations of oxygenated compounds, e.g., until recently, such fuels sold in the U.S. contained ethanol at concentrations of 10 volume-% or less. However, because of recent government action to encourage greater use of renewable fuel components, the concentration of ethanol in spark-ignition engine fuels is expected to increase in the U.S and other regions. Because of their limited production in the past, little is known about the applicability to these higher ethanol fuels of the standard laboratory tests that have traditionally been used to measure the properties of spark-ignition engine fuels. One such property is the octane rating of the fuel, which is measured by ASTM D2699, �,Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel,�, and ASTM D2700, �,Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel.�, Octane testing of fuels containing more than 10 volume-% ethanol has been quite limited in the past, and little is known about the precision of these test methods when applied to higher ethanol content blends. This inter-laboratory test program was therefore undertaken to assess the applicability and precision of D2699 and D2700 when these methods are used to determine octane ratings of the higher ethanol fuels expected in the near future. More specifically, the purposes of this inter-laboratory test program were: a. to demonstrate that test methods D2699 and D2700 as currently practiced are applicable to spark-ignition engine fuels containing up to 25 volume-% ethanol, and b. to determine the precision of D2699 and D2700 when fuels containing up to 25 volume-% ethanol are tested.
01/12/2012 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D16-1044
An interlaboratory study was conducted in 2011 by eight laboratories. Each laboratory tested up to five different levels of three hydrocarbons. Three laboratories ran samples twice using either different instruments or different calibration standards, resulting in eleven sets of results.
01/12/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E01-1118
The ILS for E572 Test Method for Analysis of Stainless Steels by X-ray Fluorescence Spectrometry was started back in the 1980s and has had several coordinators for the study. In 2011, it was discovered that erroneous values were published in the precision and bias statement in E572. No copy of the original research report has been found. The report submitted by the participating laboratories were reevaluated and the results can be found in this research report.
01/12/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D01-1165
An interlaboratory study was conducted in 2012 by six laboratories, testing four different surface preparations to establish a precision statement for ASTM D7682.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1166
An interlaboratory study was conducted in 2012 by seven laboratories, testing four different thermoplastic materials to establish a precision statement for ASTM D4797.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1167
An interlaboratory study was conducted in 2011 by eleven laboratories testing samples prepared on three different representative coil industry metal substrates. Each substrate was coated with three different target coating weights (low, intermediate, and high) of either of two different Ti-containing commercial coil dry-in-place metal pretreatments.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1747
The objective of this round robin was to evaluate the precision of a new automated smoke point test apparatus and at to revise the precision of the current manual IP 57 test method. The test method used for this ILS was based on the IP 57 with the addition of dedicated sections for the automated procedure.SC-B-10 decided to include two domestic kerosines in this particular exercise to take the opportunity to determine the precision of both procedures for these types of samples that were not part of the scope of the current IP 57. The inter laboratory study was performed from November 2011 to February 2012, with 11 manual labs, 13 automated labs, 15 different samples tested in blind duplicate. The results were evaluated for precision according to the statistical procedures given in IP 367 (EN ISO 4259) as implemented in ASTM D02 computer program D2PP.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1748
An interlaboratory study was conducted by eleven laboratories, testing ten different materials to establish a precision statement for ASTM D7061.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1749
An interlaboratory study was conducted by eight laboratories, testing twenty one different materials to establish a precision statement for ASTM D5501.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1750
An interlaboratory study was conducted by twenty laboratories, testing twelve jet fuel samples to establish a precision statement for test method D7042.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F02-1032
An interlaboratory study was conducted in 2012 by twelve laboratories. Of the twelve laboratories that participated, seven tested the edge dip option, and five tested the eye dropper method. Each participant analyzed 100 randomly coded samples (50 produced with channels and 50 without channels) for each of five materials. Every analyst reported results to indicate the presence or absence of a channel. The results were tabulated as the number identified correctly, false positives, and false negatives, the details are given in this ASTM Research Report.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:G01-1025
An interlaboratory study was conducted by ten laboratories, testing one set of carbon steel sample to establish a precision statement for test method G202.
01/11/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C16-1039
An interlaboratory study was conducted by two laboratories, the density, settling, and shrinkage of two different materials, in three size variations to establish a precision statement for ASTM C1497.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D31-1015
An intralaboratory study was conducted by one laboratory, reporting five replicate test results for six different specimen types to establish precision statements for D7816.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D31-1016
An intralaboratory study to establish precision statements for D7817 was conducted by one laboratory, reporting five replicate test results for six different specimen types.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D31-1017
The precision of test method D7818 is based on an interlaboratory study of WK28572, Standard Test Method for the Enumeration of Proteolytic Bacteria in Fresh (uncured) Hides and Skins, conducted in 2010. Two laboratories participated in this study. Each of the two labs reported seven replicate test results for both the number of colony forming units per gram, and the Log proteolytic bacteria, of a single uncured hide material. Every �,test result�, reported represents an individual determination. Except for the use of only two laboratories, and a single material, Practice E 691 was followed for the design and analysis of the data, the details are given in ASTM Research Report No. D31-1017.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D31-1018
The precision of test method D7819 is based on an interlaboratory study of WK28573, Standard Test Method for the Enumeration of Yeast and Mold on Fresh (uncured) Hides and Skins, conducted in 2010. Two laboratories participated in this study. Each of the two labs reported seven replicate test results for both the number of colony forming units per gram, and the Log yeast and mold, of a single uncured hide material. Every �,test result�, reported represents an individual determination. Except for the use of only two laboratories, and a single material, Practice E 691 was followed for the design and analysis of the data, the details are given in ASTM Research Report No. D31-1018.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:E37-1045
Interlaboratory Test for ASTM E2890, Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method.
01/09/2012 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1744
At the December 2010 meeting of D02.07.D task group (TG 32) was formed to establish the precision of the 3�,C results from D7346 Test method for No Flow Point of Petroleum Products and the relative bias these results might have compared to D97 Test Method for Pour Point of Petroleum Products. D7346 determines the No Flow Point with a resolution of 0.1C and can round that temperature to the next warmer 3�,C interval. Other Pour Point test methods similarly determine first the No Flow Point, then report the temperature found 3�,C warmer. An interlaboratory test program was designed and presented to D02.07.D which eventually consisted of 12 laboratories participating using D7346, and 12 laboratories participating using D97. As in most ILS, not all of the participating laboratories returned data resulting in a final total of 11 laboratories for D7346 and 10 laboratories for D97. The samples that were included consisted of, 6 fuels, 5 base oils (mineral and synthetic), and 9 finished lubricants (mineral and synthetic) covering the expected Pour Point range of +15 to - 60�,C. The samples were obtained from 7 different suppliers. The samples were shipped as blind duplicates and coded such that the duplicate sample was unknown.
07/08/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D01-1163
An interlaboratory study was conducted by six analysts, using seven different instruments, testing samples of two coatings prepared on the same substrate to establish a precision statement for ASTM D7234.
01/07/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D13-1134
An interlaboratory study was conducted by five laboratories participated in this study, testing five samples of two carpet types to establish a precision statement for ASTM D1335.
01/07/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D13-1135
An interlaboratory study was conducted by five laboratories, testing three replicates of five different carpet constructions to establish a precision statement for ASTM D3936.
01/07/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D13-1136
An interlaboratory study was conducted by five laboratories, testing five different types of cotton to establish a precision statement for ASTM D5867.
01/07/2012 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:F11-1020
An intralaboratory study was conducted to establish precision statements for F2828. One laboratory reported a total of five replicate results (each of the average of multiple measurements taken with and against the natural lay of the carpet fibers) over a period of five testing days.
01/07/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1164
Interlaboratory Study to Establish Precision Statements for ASTM D7804-12, Test Method For Fiber Shedding of Paint Roller Covers
01/06/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D03-1009
An interlaboratory study was conducted by six laboratories reporting Hydrogen sulfide, Carbonyl sulfide, and methyl mercaptan concentrations on three different materials to establish precision statements for D5504. Every ",test result", reported represents an individual determination. Each participating laboratory reported five replicate test results for every material.
01/06/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:B09-1017
An interlaboratory study was conducted by three laboratories participating in this study, recording the magnetic saturation on three specimens each, of ten different materials. This procedure was performed three times on each material in order to determine the precision of the test method.
15/05/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:B09-1018
An interlaboratory study was conducted in 2010 by three laboratories participating in this study, recording the coercivity on three specimens each, of ten different materials. This procedure was performed three times on each material in order to determine precision statements for test method B887-12.
15/05/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:F02-1031
An interlaboratory study was conducted by two laboratories testing five samples to establish a precision statement for ASTM F1717.
15/05/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F04-1013
An interlaboratory study was conducted by six laboratories testing a single type of monoaxial screw to establish a precision statement for test method F1717. Every ",test result", represents an individual determination. Every laboratory reported five replicate test results for each material.
15/05/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1745
An interlaboratory study was conducted to determine the effect of an oil-soluble red dye to help differentiate the layers in D1401 testing. The purpose was not to establish a new precision statement. Six laboratories tested twenty six samples.
05/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C16-1038
An interlaboratory study was conducted by ten laboratories testing three samples to establish a precision statement for test method C1303.
01/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D15-1033
Interlaboratory Study to Establish Precision Statements for ASTM D1123-12 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
01/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1256
An interlaboratory study was conducted by five laboratories testing three different Olefin plastic materials to establish precision statements for D1603. Every ",test result", represents the average of two determinations. Each laboratory reported three replicate test results for each material.
01/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E08-1008
An interlaboratory study was conducted by ten laboratories testing Precracked Charpy-type, PCC, samples to establish a precision statement for test method E1921.
01/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F02-1030
Interlaboratory Study to Establish Precision Statements for ASTM F2638 - 12, Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
01/05/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F04-1013
An interlaboratory study was conducted by six laboratories testing a single type of monoaxial screw to establish a precision statement for test method F1717.
01/05/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:G01-1024
G69 test method was originally published as a technical paper in 1941 and has been in continuous use since as a rapid and simple method to determine the solid solution content of certain alloying elements in aluminum alloys and primarily heat-treatable alloys. A series of inter-laboratory tests were begun in 1976 to measure the solution potentials of aluminum alloys. The purpose of these tests was: 1) to determine if the procedure was sufficiently reproducible to allow it to be written as a standard test method and 2) to determine whether alternative pretreatment methods were acceptable. These tests continued through 1986. A standard practice was approved in 1981, using the time honored mechanical abrasion with dry #320 grade aluminum oxide followed by polishing with #00 steel wool. A negative in 1981 was resolved with the proviso that a round robin test program be conducted to determine whether chemical pretreatments could be used instead of the laborious mechanical pretreatment. A previous research report, G01-1015, was prepared using the data from the ILS, but it failed to incorporate the results for four of the alloys and the calculations were in error. This report presents the results of all of these tests, including the 1976 data that was used to support the G69-81 standard, and round robin testing conducted in 1983, 1985 and 1986 on chemical pretreatments.
01/05/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1741
An interlaboratory study was conducted by twenty laboratories, testing ten samples to establish a precision statement on formulated oil to be included in ASTM D7042, Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
15/04/2012 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1742
An interlaboratory study was conducted by nineteen laboratories, testing ten samples to establish a precision statement on Diesel Fuel to be included in ASTM D7042, Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
15/04/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1740
At the June 2010 meeting of D02.07.D a limited interlaboratory study was approved to establish confidence in revisions to the apparatus utilized in test methods D5771 and D5950. A newer model of apparatus has been in use for several years which utilizes an internal cooling source, the methods currently reference cooling being supplied from an external source. While there are no other differences in the apparatus and test conditions, the committee agreed that a small study using at least five instruments and five samples in duplicate spanning the temperature range of the precision would be sufficient to establish the confidence with the internal cooling source version. The design of the study eventually resulted in nine total samples and six laboratories each for the external cooling (CPP97) and the internal cooling (CPP 5Gs) apparatus using D5950, Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method) and five total samples and six laboratories each for the external cooling (CPP97) and the internal cooling (CPP 5Gs) apparatus using D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method). The samples were a variety of fuels and lubricants covering the range of temperatures from �, 60 to +10�,C, with the precision range of the test methods being from -56 to +34�,C. The higher temperature samples, above +34�,C, were unable to be located. The samples were shipped as blind duplicates and coded such that the duplicate sample was unknown, and no two labs had the same sample coding. When the samples were tested by D5950, two complete sets with different codes were shipped to allow testing by the typical 3�,C interval and also at the 1�,C Interval.
15/04/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D15-1031
An interlaboratory study was conducted by four laboratories testing four samples to establish a precision statement for test method D7736.
01/04/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D15-1032
An interlaboratory study was conducted by twelve laboratories testing four samples to establish a precision statement for test method D3321.
01/04/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E06-1003
An interlaboratory study was conducted by six laboratories (two laboratories tested one additional instrument for a total of eight laboratories), testing thirteen samples to establish a precision statement for ASTM E2649.
01/04/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E12-1007
Interlaboratory Study # 710 was conducted to establish a precision statement for E2832- Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting. A total of ten analysts, representing different companies, participated in this study, testing ten distinct locations on a specially prepared section of pavement. Each �,test result�, reported represents an individual determination, and all participants were asked to report duplicate test results for each area tested.
01/04/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E35-1006
An interlaboratory study was conducted by eight laboratories testing three disinfectant samples to establish a precision statement for test method E2799.
01/04/2012 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D01-1161
An interlaboratory study was conducted by one laboratory testing four samples to establish a precision statement for test method D7786.
01/02/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D01-1162
An interlaboratory study was conducted by one laboratory testing one sample to establish a precision statement for test method D3273.
01/02/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D01-1168
Interlaboratory Test Method for Study to Establish Precision Statements for ASTM D1353-13, Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
01/02/2012 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D05-1041
This Research Report contains documentation and data compiled to support revisions to ASTM standard test method (STM) D4239-11: Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion.
01/02/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:F23-1008
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method F2894.
01/02/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F23-1009
An Interlaboratory Study was conducted to establish a precision statement for F1930, Test Method for Evaluation of Flame Resistant Clothing for Protection Against Flash Fire Simulations Using an Instrumented Manikin. Seven laboratories in four different countries were involved. One laboratory used two different types of instrumentation, so this second approach appears as an eight laboratory. There were four test conditions, with three specimens to be tested at each condition. The test conditions were: Condition 1: 3 second exposure at 84 kW/m2 with the manikin dressed only in the test coverall. Condition 2: 4 second exposure at 84 kW/m2 with the manikin dressed only in the test coverall. Condition 3: 4 second exposure at 84 kW/m2 with the manikin dressed in 100% cotton T-shirt and briefs under the test coverall. Condition 4: 5 second exposure at 84 kW/m2 with the manikin dressed in 100% cotton T-shirt and briefs under the test coverall.
01/02/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1735
An interlaboratory study was conducted by nine laboratories testing 24 silicon doped samples in the range of 3-100 mg/kg samples to establish a precision statement for test method D7757.
15/01/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1736
An interlaboratory study was conducted by fourteen laboratories testing twenty-two samples to establish precision statements for revision of ASTM D7220.
15/01/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1738
An interlaboratory study was conducted by six laboratories testing fifteen samples to establish a precision statement for ASTM D7753.
15/01/2012 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1737
An interlaboratory study was conducted by nine laboratories testing eleven samples to establish a precision statement for test method D7591.
01/01/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D11-1109
An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method D6854.
01/01/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D11-1110
An interlaboratory study was conducted by nine laboratories testing two types of silica samples to establish a precision statement for D6845- Test Method for Silica, Precipitated, Hydrated--CTAB (Cetyltrimethylammonium Bromide) Surface Area.
01/01/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D14-1015
An intralaboratory study was conducted by one laboratory testing six samples (Casein Glue Adhesive, Chembond for Fir, Chembond for Maple, Elastomatic, PVAc (Hard), and PVAc (Soft)) to establish a precision statement for test method D905.
01/01/2012 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:G02-1012
This interlaboratory testing project was designed to determine the typical variability to be expected in scratch width measurements on two materials of varying resistance to scratching, namely, polymethylmethacrylate (PMMA) and cartridge brass (70 wt% Cu-30 wt% Zn). This study aimed to establish a repeatability statement for G171. The standard involves producing a series of three linear scratches at constant normal force and speed with a diamond stylus, and then using optical measurement of the width of the scratches to calculate a scratch hardness number (HS).
01/01/2012 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1041
The precision of this test method is based on an inter-laboratory study (ILS) conducted in 2010. The ILS was performed by seven laboratories using pervious concrete mixtures proportioned using local materials. Each laboratory prepared three batches (designed at void contents of 18, 20, and 22% respectively) and performed three replicate tests per batch (a test includes three individual specimens). Five of the laboratories had 2 different technicians performing the test.
15/12/2011 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C01-1011
There are two objectives to this report: 1. Examine the trends in precision of Portland cement strength test results to determine whether there has been significant change over the 40+ year period represented by CCRL Portland cement samples. 2. Develop revised statistical parameters for 3- and 7-day test ages for Portland cement test results using more recent CCRL data, and develop new estimates of precision for 1- and 28-day test ages.
01/12/2011 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1733
An interlaboratory study was conducted by one laboratory testing two samples to establish a precision statement for test method D6743.
01/12/2011 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D04-1035
Research Report D04-1035 and D04-1036 presents the results of the Interlaboratory Study used to establish the precision and bias statement for ASTM D7496, Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer. The collaborative study included respectively 14 labs and 17 labs who used method D7496 to analyze the viscosity of several types of emulsified asphalt of varying viscosity levels, including three different standards. The research report presents summary method performance statistics as well as the measurement data used to calculate results for the study.
01/12/2011 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D04-1036
Research Report D04-1035 and D04-1036 presents the results of the Interlaboratory Study used to establish the precision and bias statement for ASTM D7496, Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer. The collaborative study included respectively 14 labs and 17 labs who used method D7496 to analyze the viscosity of several types of emulsified asphalt of varying viscosity levels, including three different standards. The research report presents summary method performance statistics as well as the measurement data used to calculate results for the study.
01/12/2011 - PDF - Anglais - ASTM
En savoir plus81,90 €