ASTM
-
ASTM Research Report RR:E15-0028
An interlaboratory study was conducted by seven laboratories which analyzed mixtures of ethylene, diethylene, and triethylene glycols to establish a precision statement for test method D1209.
04/01/1966 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:E01-1062
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
16/10/1972 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1000
An Interlaboratory Study was conducted to establish precision statements for ASTM D297, Chemical Analysis of Rubber Products (Sulfur).
24/09/1973 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1004
An Interlaboratory Study was conducted to establish precision statements for ASTM D471, Test for Change in Properties of Elastomeric Vulcanizates Resulting from Immersion in Liquids.
22/04/1974 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1013
An interlaboratory study was conducted by five laboratories testing seven samples to establish a precision statement for test method D2624. Three Ethyl and two Maihak meters were used to measure the electrical conductivity of each sample.
11/09/1975 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1066
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
04/08/1976 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1026
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method D943.
24/08/1976 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1036
An interlaboratory study was conducted by six laboratories testing fifteen samples to establish a precision statement for test method D3120.
15/02/1977 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1012
An Interlaboratory Study was conducted to establish precision statements for ASTM D3616, Test for Rubber, Raw - Determination of Gel, Swelling Index, and Dilute Solution Viscosity.
06/07/1977 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1064
An interlaboratory study was conducted by three laboratories testing three materials to establish a precision statement for test method D570.
19/07/1977 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C08-1004
The data analyzed in this report was collected in 1971 as part of a Round-Robin study of the test method C863 by five different laboratories, which tested three samples each of five different materials. The variable measured is percent volume expansion. The test temperature was 1100 degrees Celsius.
19/07/1977 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E05-1002
An interlaboratory study was conducted by twenty one laboratories testing fifteen samples to establish a precision statement for test method E662.
03/10/1977 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1067
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
21/10/1977 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1014
An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method D3427.
31/01/1978 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1054
An interlaboratory study was conducted to establish a precision statement for ASTM D3702. There were 5 labs with 4 tests each in Round Robin No. 1, 6 labs with 2 tests each in Round Robins No. 2a and 2b, and 2 labs with 6 tests each n Round Robin No. 3. Tests marked with * were used in calculations.
18/08/1978 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1056
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3705.
18/08/1978 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1070
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
08/09/1978 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D01-1016
Interlaboratory Study to Establish Precision Statements for ASTM D3125, Test for Methyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters
20/10/1978 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1108
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3342.
25/04/1979 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1020
Interlaboratory Study to Establish Precision Statements for ASTM D1614, Test for Alkalinity in Acetone
21/05/1979 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1074
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
09/01/1980 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1133
An interlaboratory study was conducted by five laboratories testing ten samples to establish a precision statement for test method D3944.
26/08/1980 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1084
Interlaboratory Study to Establish Precision Statements for ASTM E353, Standard Test Methods for Chemical Analysis of Stainless, Heat- Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
27/08/1980 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1083
Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
27/08/1980 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1084
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D882.
01/10/1980 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1026
An interlaboratory study was conducted by fifteen laboratories testing fifteen samples to establish a precision statement for test method D2369.
16/12/1980 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D09-1007
Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
01/04/1981 - - -
En savoir plusDe: 81,90 € -
ASTM Research Report RR:D09-1007
Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
07/04/1981 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1135
An interlaboratory study was conducted by fourteen laboratories testing two sample blends across three series to establish a precision statement for test method D2670.
18/06/1981 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D09-1009
An interlaboratory test program was conducted to determine the precision that would result from the use of a test method for the bondability of insulated wire to potting compounds. This test method is for inclusion in ASTM D3032 on Hookup Wire Insulation. A joint test program was carried out with members of ASTM D9 Subcommittee 16 and the A-2H Committee of the Society of Automotive Engineers participating in specimen preparation and test. Four ASTM members and three A-2H members participated in the program.
22/07/1981 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1019
An Interlaboratory Study was conducted to establish precision statements for ASTM D4075, Test for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals.
20/08/1981 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1021
An interlaboratory study was conducted to establish precision statements for ASTM D3900, Methods for Rubber, Raw Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers).
04/02/1982 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1077
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
05/02/1982 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1087
Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
05/02/1982 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:E01-1088
Interlaboratory Study to Establish Precision Statements for ASTM E478, Standard Test Methods for Chemical Analysis of Copper Alloys
17/03/1982 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:D02-1150
A round robin was conducted by seven laboratories to establish supporting data for ASTM D2893.
10/05/1982 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1160
An interlaboratory study was conducted by eight laboratories testing seven kerosene samples to establish a precision statement for test method D187.
29/06/1982 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D32-1004
Supporting Data for ASTM D4179, Test for Single Pellet Crush Strength of Formed Catalyst Shapes
25/10/1982 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:G04-1000
This research report records the pertinent test data which resulted from an interlaboratory testing program conducted to assess the reproducibility of a given oxygen mechanical impact tester and among different testers of different designs. These testers constituted all the known tester facilities available at the time the round robin study was conducted. This research report acts as supporting data for test method G86.
12/01/1983 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D05-1005
An interlaboratory study was conducted by six laboratories testing seven coal samples to establish a precision statement for test method D4208.
28/02/1983 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1101
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision and bias statement for test method D882.
13/04/1983 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D01-1033
An interlaboratory study was conducted by fourteen laboratories testing three methanol samples to establish a precision statement for test method D1363.
29/04/1983 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1091
An interlaboratory study was conducted by nine laboratories testing five alloy samples to establish a precision statement for test method E350.
10/05/1983 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1105
An interlaboratory study was conducted by five laboratories testing four samples to establish a precision statement for test method D1622.
15/06/1983 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1166
An interlaboratory study was conducted by six laboratories testing petroleum coke samples to establish a precision statement for test method D4292.
25/07/1983 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D19-1099
An interlaboratory study was conducted by twelve operators in nine laboratories testing samples in four levels of concentration added to both reagent water and matrix water of their choice to establish a precision statement for test method D4193.
08/09/1983 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D11-1024
An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method D1415.
08/09/1983 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1108
An interlaboratory study was conducted by eight laboratories testing six polyol samples to establish a precision statement for test method D4273.
23/09/1983 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1034
An interlaboratory study was conducted by five laboratories testing paint samples to establish a precision statement for test method D4145.
10/10/1983 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1103
A round robin study has been conducted to formulate a precision and accuracy statement for the proposed new method ",Package Yield of Film",. These results include data from six laboratories. In the study four materials (polyethylene 0.0025", nominal thickness, polypropylene 0.001", nominal thickness, polyester 0.0005", nominal thickness, and polyester 0.002", nominal thickness were used. Two methods of sample preparation were used in the round. The details are listed in the attached protocol. Differences in the reported values do not appear to be related to sampling method (straight edge versus template). Use of the two methods of sample preparation resulted in ten data sets.
11/10/1983 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1109
An interlaboratory study was conducted by seven laboratories testing four samples to establish a precision statement for test method D747.
11/10/1983 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1111
An interlaboratory study was conducted by five laboratories testing resin and nitrile rubber samples to establish a precision statement for test method D4322.
12/12/1983 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1112
An interlaboratory study was conducted by seven laboratories testing polymer samples to establish a precision statement for test method D1243.
12/01/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D05-1006
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D4326.
13/01/1984 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D32-1009
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method D4365.
13/01/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1106
An interlaboratory study was conducted by fifteen laboratories testing for manganese in different water samples to establish a precision statement for test method D858.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1103
An interlaboratory study was conducted by fifteen laboratories testing in different water samples to establish a precision statement for test method D1687.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1109
An interlaboratory study was conducted by fourteen laboratories testing for cobalt in different water samples to establish a precision statement for test method D3558.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1107
An interlaboratory study was conducted by fourteen laboratories testing for nickel in different water samples to establish a precision statement for test method D1886.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1104
An interlaboratory study was conducted by six laboratories testing for barium in three reagent water samples and three water of choice samples to establish a precision statement for test method D4382.
31/01/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1110
An interlaboratory study was conducted by eleven laboratories testing for beryllium in different water samples to establish a precision statement for test method D3645.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1102
An interlaboratory study was conducted by thirteen laboratories testing distilled water samples and seven laboratories testing water of choice to establish a precision statement for test method D1068.
31/01/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1108
An interlaboratory study was conducted by fourteen laboratories testing for arsenic in different water samples to establish a precision statement for test method D2972.
31/01/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1111
An interlaboratory study was conducted by fourteen laboratories testing four buffer solutions to establish a precision statement for test method D1293.
07/02/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1027
An interlaboratory study was conducted by six laboratories testing two samples to establish a precision statement for test method D624.
14/02/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1028
An interlaboratory study was conducted to establish precision statements for ASTM D531-00(2005) Standard Test Method for Rubber Property-Pusey and Jones Indentation.
14/02/1984 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:D11-1029
An interlaboratory study was conducted to establish precision statements for ASTM D2240-05, Standard Test Method for Rubber Property- Durometer Hardness.
14/02/1984 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:D01-1038
An interlaboratory study was conducted by six laboratories testing seven hydrocarbon solvent samples to establish a precision statement for test method D4367.
12/03/1984 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:C24-1014
An interlaboratory study was conducted by four laboratories, testing 5/8 diameter Closed Cell, Open Cell and Soft Type backer materials to establish a precision statement for Test Method C1016, standard Test Method for Determination of water Absorption by Sealant Backing (Joint-Filler) Material, for both Procedure A and B.
12/03/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1030
Research Report D11-1030 contains supporting data for ASTM D991, Test Method for Rubber Property- Volume Resistivity of Electrically Conductive and Antistatic Products.
13/03/1984 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:E28-1004
An interlaboratory study was conducted by six laboratories testing six materials to establish a precision statement for test method B557 and B557M.
30/03/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E28-1028
Interlaboratory Study to Establish Precision Statements for ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials
30/03/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C16-1003
An interlaboratory study was conducted by ten laboratories testing a single sample of glass fiber insulation to establish a precision statement for test method C335.
17/05/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1043
An interlaboratory study was conducted by five laboratories testing ketone samples to establish a precision statement for test method D3893.
26/06/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D01-1044
An interlaboratory study was conducted by eight laboratories testing one sample of methyl ethyl ketone to establish a precision statement for test method D1353.
26/06/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1041
An interlaboratory study was conducted by four laboratories testing two samples each of n-butyl acetate, n-butyl alcohol, and methyl ethyl ketone to establish a precision statement for test method D1613.
26/06/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C16-1005
Research Report C16-1005 describes an interlaboratory study in which seven laboratories performed tests on four different materials to establish precision estimates for the proposed standard test method, ASTM 0134-90, for water intake of rigid thermal insulations during partial immersion.
05/07/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1112
An interlaboratory study was conducted by fourteen laboratories testing for lead in water samples to establish a precision statement for test method D3559.
11/07/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D13-1068
An interlaboratory study was conducted by four laboratories testing four fabrics to establish a precision statement for test method D3774.
25/07/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D13-1062
An interlaboratory study was conducted by five laboratories testing three materials (cotton single yarn chafer, cotton ply yarn chafer, and rayon single yarn chafer) to establish a precision statement for test method D3883.
25/07/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D13-1067
An interlaboratory study was conducted by four laboratories testing four fabrics (seersucker, gingham, corduroy, and denim) to establish a precision statement for test method D3775.
25/07/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C16-1006
Seven participants participated in this Interlaboratory study, during which an interlaboratory test was performed on Calcium-silicate block thermal insulation (ASTM-C533, Type 1) to develop a precision statement for Test Method ASTM-C421, Tumbling Friability of Preformed Block-Type Thermal Insulation. The precision of Test Method ASTM-C421 already had been determined for rigid cellular plastic thermal insulation (RR: C16-1006), but Committee C16 required that an additional material be included in the precision statement.
14/08/1984 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D32-1010
An interlaboratory study was conducted by five laboratories testing three samples (AGZ-200, Bobcat 2, and HFZ-20) to establish a precision statement for test method D3906.
20/08/1984 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D09-1017
An interlaboratory study was conducted by six laboratories testing four materials to establish a precision statement for test method D2671.
24/08/1984 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1116
An interlaboratory study was conducted by eight laboratories testing four polymer samples (yellow bottle compound, blue bottle compound, white can coating compound, and saran industrial film) to establish a precision statement for test method D4443.
09/10/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1176
An interlaboratory study was conducted by twelve laboratories testing five grease samples to establish a precision statement for test method D4290.
12/10/1984 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C16-1007
An interlaboratory study was conducted by three laboratories testing cellular glass insulation samples to establish a precision statement for test method C240.
29/10/1984 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C07-1003
An interlaboratory study was conducted by twelve laboratories testing five high calcium quicklime samples and four dolomitic quicklime samples to establish a precision statement for test method C110.
30/11/1984 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1118
An interlaboratory study was conducted by eleven laboratories testing three samples to establish a precision statement for test method D4475.
18/12/1984 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1185
An interlaboratory study was conducted by one laboratory testing nine grease samples to establish a precision statement for test method D4425.
26/12/1984 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1192
A large-scale interlaboratory study was conducted to compare the precision associated with CCR (Conradson Carbon Residue Test-RSTH D189) and HCS (Hicro Carbon Residue Test) and establish their difference if any.
01/01/1985 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D02-1178
An interlaboratory study was conducted by nine laboratories testing ten samples to establish a precision statement for test method D1322.
10/01/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1042
An interlaboratory study was conducted by eight laboratories testing for the determination of cerium and lanthanum in iron and steels to establish a precision statement for test method E350.
10/01/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1095
An interlaboratory study was conducted by twenty-three laboratories testing for the determination of vanadium in five materials (pig iron, two tool steels, stainless steel, and low alloy steel) to establish a precision statement for test method E351.
10/01/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1120
An interlaboratory study was conducted by eleven laboratories testing six materials to establish a precision statement for test method D732.
10/01/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1041
An interlaboratory study was conducted by twenty-five laboratories testing for the determination of sulfur in five materials (low alloy steel, two stainless steels, silicon steel, and plain carbon steel) to establish a precision statement for test method E1019.
10/01/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1186
An interlaboratory study was conducted by eleven laboratories testing twelve jet fuel samples and two pure hydrocarbons to establish a precision statement for test method D3701.
10/01/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1187
An interlaboratory study was conducted by twelve laboratories to develop a simple copper strip tarnish procedure for measuring the copper corrosion properties of lubricating grease to establish a precision statement for test method D4048.
11/01/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1190
An interlaboratory study was conducted by nine laboratories testing eight samples to establish a precision statement for test method D4422.
25/01/1985 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D19-1119
An interlaboratory study was conducted by seven laboratories and ten operators testing for the determination of hydrazine in water to establish a precision statement for test method D1385.
01/02/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1036
An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D1053.
19/02/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1037
An interlaboratory study was conducted by three laboratories testing five materials to establish a precision statement for test method D1329.
26/02/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1045
An interlaboratory study was conducted by ten laboratories testing four paint samples to establish a precision statement for test method D4457.
08/04/1985 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1123
An interlaboratory study was conducted by twenty-two laboratories testing four polyethylene samples to establish a precision statement for test method D1505.
15/04/1985 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D32-1015
An interlaboratory study was conducted by seven laboratories testing an equilibrium FCC catalyst to establish a precision statement for test method D4513.
02/05/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D14-1003
An interlaboratory study was conducted by nine laboratories testing four different hot melt adhesives to establish a precision statement for test method D4499.
02/05/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D35-1000
Supporting Data for ASTM D4491, Method for Testing the Water Permeability of Geotextiles by the Permittivity Method
03/05/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1124
An interlaboratory study was conducted by nine laboratories testing four polymer samples to establish a precision and bias statement for test method D1238.
08/05/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F23-1000
This research report contains supporting data for ASTM F955, Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances.
27/06/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:B09-1002
This report presents the data and calculated repeatability intervals I (r) and reproducibility intervals I (R) for the test method on compressibility, B331. These intervals or ranges are needed to construct the mandatory precision statements for B331. The interpretation of I (r), repeatability interval is as follows: on the basis of test error alone, the difference in absolute value, of two test results obtained in the same laboratory on the same material will be expected to exceed I (r) only about 5% of the time. Thus, if such a difference is found to be larger than I(r), there is reason to question one or both of the test results. Similarly, I(R), describes the difference between single tests done in separate laboratories. If the absolute difference between two such tests on the same material exceeds I(R), there is reason to question the results of one or both tests, because I(R) is exceeded only 5% of the time.
02/07/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D32-1005
An interlaboratory study was conducted by four laboratories testing two FCC catalysts to establish a precision statement for test method D4512.
11/07/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1015
An interlaboratory study was conducted by ten laboratories testing three sealants to establish a precision statement for test method C661.
11/07/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D16-1008
An interlaboratory study was conducted by four laboratories testing three materials to establish a precision statement for test method D4493.
19/07/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1120
An interlaboratory study was conducted by seven laboratories testing for radium in water to establish a precision statement for test method D3454.
23/07/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D13-1069
An interlaboratory study was conducted by twelve laboratories testing two samples to establish a precision statement for test method D1574.
06/09/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F17-1038
An interlaboratory study was conducted by nine laboratories testing a 2-in. medium density polyethylene pipe to establish a precision statement for test method D1599.
09/09/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F17-1037
An interlaboratory study was conducted by nine laboratories testing a 2 inch medium density polyethylene pipe to establish a precision statement for test method D1598.
27/09/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E28-1006
An interlaboratory study was conducted by five laboratories testing 18% cold drawn 204 stainless steel samples to establish a precision statement for test method B557 and B557M.
16/10/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E28-1029
An interlaboratory study was conducted to determine if different data acquisition systems using different techniques would produce similar results for tension testing of metallic materials
16/10/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F03-1009
An interlaboratory study was conducted by seven laboratories testing five materials to establish a precision statement for test method F38.
05/11/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1044
An interlaboratory study was conducted by twelve laboratories testing three samples of aluminum alloys to establish a precision statement for test method E34.
05/11/1985 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D13-1070
An interlaboratory study was conducted by four laboratories testing three materials to establish a precision statement for test method D3882.
05/11/1985 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1046
Two interlaboratory studies were conducted, one by eight laboratories and the other by seven laboratories, both testing three samples to establish a precision statement for test method D4563.
21/11/1985 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1195
An interlaboratory study was conducted by seven laboratories testing aviation turbine fuels to establish a precision statement for test method D3240.
21/11/1985 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D27-1004
Supporting Data for ASTM D4059, Method for Analysis of Polychlorinated Biphenyls in Mineral Insulating Oils by Gas Chromatography
09/12/1985 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D13-1072
An interlaboratory study was conducted by sixteen laboratories testing four materials to establish a precision statement for test method D2969.
16/12/1985 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D01-1048
An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method D4450.
20/01/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D20-1126
An interlaboratory study was conducted by five laboratories testing plastic samples to establish a precision statement for test method D4350.
20/01/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1125
An interlaboratory study was conducted by eight laboratories testing five materials to establish a precision statement for test method D638.
20/01/1986 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D24-1004
Supporting Data for ASTM D3265, Test Method for Carbon Black- Tint Strength
27/01/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C24-1016
An interlaboratory study was conducted by six laboratories testing five single component sealants to establish a precision statement for test method C1183.
31/01/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1041
An interlaboratory study was conducted by eight laboratories testing four materials to establish a precision statement for test method D813.
19/02/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D10-1004
Research Report D10-1004 contains supporting data for ASTM: D775, Method for Drop Test for Loaded Boxes, D959, Method of Drop Test for Filled Bags, D3332, Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines, D2463, Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers.
19/02/1986 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D32-1017
An interlaboratory study was conducted by three laboratories testing two materials to establish a precision statement for test method D4164.
25/02/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D32-1018
An interlaboratory study was conducted by five laboratories testing gamma-alumina, 1/16 inch extrudates, and alpha-alumina, 3/16 inch pellets to establish a precision statement for test method D4180.
25/02/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D32-1019
An interlaboratory study was conducted by twenty-two laboratories testing three materials to establish a precision statement for test method D4567.
25/02/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1017
An interlaboratory study was conducted by five laboratories testing three materials to establish a precision statement for test method C731.
23/04/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D12-1008
An interlaboratory study was conducted by six laboratories testing a powder detergent and a liquid detergent to establish a precision statement for test method D4608.
21/05/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1099
Ten laboratories participated in two interlaboratory test programs that were conducted to obtain precision data for D412, one for Method A (dumbbells) and one for Method B (cut rings). Three different materials were tested by the ten laboratories on two different days.
01/06/1986 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D05-1008
An interlaboratory study was conducted by six laboratories testing ten materials to establish a precision statement for test method D4606.
04/06/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1049
An interlaboratory study was conducted by nine laboratories testing five samples of hexyl acetate to establish a precision statement for test method D1364.
13/06/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1125
An interlaboratory study was conducted by six laboratories testing calcium samples for hardness in water to establish a precision statement for test method D1126.
20/06/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1198
An international program was completed in 1983 for standard D445, in which tests were carried out on 14 opaque oils and 1 clear oil. The tests were carried out at three different temperature',s, namely 50, 80 and 100�,C. The corresponding numbers of laboratories which completed tests at these temperatures were 15, 35 and 37.
07/07/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D26-1004
An interlaboratory study was conducted by five laboratories testing five solvent grades to establish a precision statement for test method D3401.
14/07/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D09-1021
An interlaboratory test program was conducted to determine the precision that would result from the use of two test methods in ASTM D3032 on Hookup Wire Insulation. The methods are for Crush Resistance and for Cut-Through Resistance. Although these methods are separate procedures, they are similar in nature and were conducted in the same test program. The information in this report will serve as a basic for adding precision statements to the methods and the report will serve as a Research Report available from ASTM Headquarters for people interested in performing these tests. The original test program had five laboratories willing to provide data, but two of the laboratories subsequently withdrew and data was only available from three laboratories. The names and organizations or the participating members are given in Appendix 1.
08/08/1986 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C16-1011
An interlaboratoty study was conducted by three laboratories testing one sample to establish precision statements for ASTM C166.
18/09/1986 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:C16-1012
An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method C356.
18/09/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1205
An interlaboratory study was conducted by eleven laboratories testing eight wax samples to establish a precision statement for test method D1321.
22/09/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1126
An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method D3082.
29/09/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D04-1017
An interlaboratory study was conducted by twenty laboratories testing four samples to establish a precision statement for test method D546.
29/09/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1044
An interlaboratory study was conducted by four laboratories testing three different coated fabric materials to establish a precision statement for test method D3389.
01/10/1986 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1131
An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method D1894.
03/10/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1206
An interlaboratory study was conducted by seven laboratories testing eight samples to establish a precision statement for test method D1160.
14/10/1986 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:E37-1009
An interlaboratory study was conducted by nine laboratories testing four materials (Coal, Lube Oil, Polyethylene, and Calcium Oxalate) to establish a precision statement for test method E1131.
14/10/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1050
An interlaboratory study was conducted by nine laboratories testing two samples to establish a precision statement for test method E34.
23/10/1986 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1045
Research Report D11-1045 contains supporting data for ASTM D1646, Test Method for Rubber from Natural or Synthetic Sources - Viscosity and Vulcanization Characteristics Mooney Viscometer.
20/11/1986 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D20-1132
An interlaboratory study was conducted by six laboratories testing three materials to establish a precision statement for test method D4603.
03/12/1986 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1209
An interlaboratory study was conducted by nine laboratories testing eight materials to establish a precision statement for test method D4055.
15/01/1987 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1128
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D1068.
21/01/1987 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1133
An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D792.
29/01/1987 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1212
An interlaboratory study was conducted by nine laboratories testing twenty-seven oil samples to establish a precision statement for test method D4684.
06/02/1987 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1051
An interlaboratory study was conducted by nine laboratories testing for nitrogen in different test specimens to establish a precision statement for test method E1019.
08/03/1987 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1054
An interlaboratory study was conducted by eight laboratories testing two steel samples to establish a precision statement for test method E350.
22/05/1987 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:B09-1005
Subcommittee B09.06 on cemented carbides has developed a standard for measuring the fracture toughness of cemented carbides. The round robin inter laboratory test program was conducted according to the standard. This report describes the round robin, and presents and analyzes the test results so that an appropriate precision and accuracy statement can be included in the standard.
02/06/1987 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F03-1011
An interlaboratory study was conducted by six laboratories testing eight materials to establish a precision statement for test method F1087.
16/07/1987 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D05-1009
Research Report D05-1009 contains supporting data for ASTM D2492, Test Method for Forms of Sulfur in Coal.
17/08/1987 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D08-1001
Research Report D08-1001 contains supporting data for D4616, Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch.
02/12/1987 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1217
Research report D02-1217 contains supporting data for ASTM D4739, Test Method for Base Number Determination by Potentiometric Titration.
14/12/1987 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C14-1000
This Research Report provides the data and method of its treatment used to create a statement of Precision and Bias to be included in a revision of C225-73.
24/02/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1231
An interlaboratory study was conducted by fourteen laboratories testing ten samples to establish a precision statement for test method D1552.
05/08/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1057
Interlaboratory Study to Establish Precision Statements for ASTM D4838, Test Method for Determining the Relative Tinting Strength of Chromatic Paints
08/11/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1238
An interlaboratory study was conducted by 39 laboratories testing 23 samples to establish a precision statement for test method D4870.
01/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D24-1009
An interlaboratory study was conducted by four laboratories testing four samples to establish precision statements for ASTM D1937.
02/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C16-1014
The purpose of this round robin was to develop a new precision and bias statement for E96. This round robin included both thin films and thick materials, representing both low and high perm values. The object of the research being described in this report was two-fold: (l) establish a precision and bias statement for the test method and (2) seek another standard reference material (SRM) to replace the 1 mil thick polyethylene terephthalate film previously used in Standard C 677 to obtain average exposure conditions surrounding test specimens being used in this test method.
21/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D08-1003
An Interlaboratory Study to establish precisions statements for ASTM D4892, Test Method for Density of Solid Pitch (Helium Pycnometer Method).
27/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D09-1025
This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statement for the Solvent Resistance test method in Methods D2671, Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D09-1024
This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statements for ASTM D350, Standard Methods of Testing Flexible Treated Sleeving Used for Electrical Insulation. This report covers only part of the full list of methods in this standard. Other methods are still under evaluation.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1149
An interlaboratory study was conducted by eleven laboratories testing three samples, a polyethylene, an ABS and an acrylic, to establish a precision statement for test method D635.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D26-1005
An interlaboratory study was conducted by four laboratories testing five grades of virgin solvent samples to establish a precision statement for test method D2111.
09/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C09-1001
The purpose of this report is to report estimates of single-operator (i.e. within laboratory) precision and multilaboratory (i.e. between laboratory) precision, as defined in paragraphs 6.2 and 6.3 of ASTM C 802- 87, for the proposed pozzolanic-activity-with-cement test that has been under development in ASTM C09.03.10. Data were derived from the results of two interlaboratory studies. These studies are the last two in a series of five and were conducted with the method in its currently proposed form. The first three studies were developmental, consequently do not represent the currently proposed form and were not useful for precision estimates. Part 4 of the interlaboratory study was completed in 1987, Part 5 was completed in 1988. The data were analyzed according to ASTM C 802-87. The precision statement was prepared according to ASTM C 670-87. Part 4 of the interlaboratory study included three fly ashes: a Class C fly ash, a Class F fly ash, and an unclassified Class F fly ash. The latter material was known, from other experience, to perform poorly and was included to verify that the proposed method would be sensitive to such a material. Twelve laboratories participated in this study. Part 5 of the interlaboratory study included one Class C fly ash and one Class N pozzolan. Eight laboratories participated. Test ages were 7 and 28 days in both studies.
10/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1244
An interlaboratory study was conducted by fourteen laboratories testing eight sample oils to establish a precision statement for Test Method D892.
22/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1245
The precision data for D4953 contained 15 samples, 7 were hydrocarbon only and 8 were fuels containing hydrocarbon-oxygenate blends with a range of oxygen content from 2 to 6% and a vapor pressure range from 41 to 97 kPa (6 to 14 psi). The vapor pressure of these samples was determined by Procedures A and B. A total of 31 laboratories participated in the program, 18 performed Procedure A and 13 Procedure B. Vapor pressure of the hydrocarbon only samples and two samples containing methyl t-butyl ether was also determined by Method D 323.
09/03/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1249
An interlaboratory study was conducted by eleven laboratories testing nine samples to establish a precision statement for test method D4684.
12/04/1989 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D09-1026
An interlaboratory study was conducted by four laboratories testing eight samples to establish a precision and bias statement for test method D149.
03/05/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E28-1009
An Overview of ASTM E74 Load Cell Calibration With Respect to Degree of Polynomial Fit
16/08/1989 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D09-1028
This interlaboratory study was undertaken to establish the data necessary to generate a Precision Statement for the Heat Resistance and Copper Stability Test Methods in Test Methods D2671, Standard Methods of Test Heat Shrinkable Tubing for Electrical Use.
15/11/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D08-1005
Research Report D08-1005 contains supporting data for ASTM D146, Methods of Sampling and Testing Bitumen- Saturated Felts and Fabrics Used in Roofing and Waterproofing.
06/12/1989 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1058
Research Report D11-1058 contains supporting data for ASTM D575, Test Methods for Rubber Properties in Compression.
09/01/1990 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:E05-1008
An interlaboratory study was conducted by six laboratories testing six samples to derive a suitable statement of the repeatability and reproducibility achievable by the method ASTM E1354.
25/01/1990 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D01-1063
Interlaboratory Study to Establish Precision Statements for ASTM D5007, Test for Wet-to-Dry Hiding Change
28/02/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C17-1001
An interlaboratory study was conducted by one laboratory on products with mean values of wet volume ranging from 0.03 to 1.7 dm3 (30 to 1700 cm3) to establish a repeatability statement for C1122.
21/03/1990 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C17-1002
An interlaboratory study was conducted by one laboratory on products with mean values of kerosene retention of approximately 200 and 400 cm3/100g, to establish a repeatability statement for C1124.
21/03/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D27-1005
Interlaboratory Study to Establish Precision Statements for ASTM D4059, Method for Analysis of Polychlorinated Biphenyls in Mineral Insulating Liquids by Gas Chromatography
16/04/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E15-1040
This study involves two methods for determination of chloride in 50% NaOH. The purpose of the study was to evaluate these two methods as more modern and objective approaches compared to the classical method existing in E-291 of Volume 15.05. These two electroanalytical procedures to be investigated involved potentiometric titration with silver nitrate and ion selective electrod potentiometry, respectively. It was anticipated that these procedures would allow determination of chloride in 50% NaOH (and KOH), at much lower levels of chloride as exist in Mercury Cell NaOH, for example. Another anticipated advantage was that the existing classical titration already on the books would be replaced with the new methods which involve no subjective judgement regarding a visual end point determination. Finally, it was hoped that cost of apparatus and instrumentation would not be prohibitive for implementing the two new procedures.
17/05/1990 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D01-1066
A round-robin was conducted to determine the precision, degradation rates, and correlations produced by the exposure of coil coatings and automotive coaings using procedures given in ASTM D4141.
19/09/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1067
Precision, Degradation Rates, and Correlations Obtained for Coated Panels Exposed by Procedures Given in Practive D4141 - Report 2
19/09/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F02-1008
An interlaboratory study was conducted by seven laboratories testing three materials to establish a precision statement for test method F904.
31/10/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C17-1003
An interlaboratory study was conducted by one laboratory on products with mean values of loose density of 160 and 1600 kg/m3, to establish a repeatability statement for C1162.
07/11/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E33-1007
Interlaboratory Study to Establish Precision Statements for ASTM E1289, Standard Specification for Reference Specimen for Sound Transmission Loss
13/12/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1264
An interlaboratory study was conducted by six laboratories testing ten samples to establish a precision statement for test method D2603.
17/01/1991 - PDF - Anglais -
En savoir plus63,00 €