ASTM
-
ASTM Research Report RR:E33-1015
This is a study of reproducibility and repeatability for a field test of normalized door insertion loss and door transmission class using both scanning and fixed microphone methods
01/04/2019 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D05-1054
The data for this test method covers the determination of total fluorine and total chlorine in coal. Samples containing 10 mg/kg to 4000 mg/kg of the interested analyte can be analyzed directly
01/02/2019 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F23-1011
Interlaboratory Study 1453 was conducted to establish a precision statement for F2878, Test Method for Protective Clothing Material Resistance to Hypodermic Needle Puncture
01/02/2019 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1190
Interlaboratory Study 1055 was conducted to establish a precision statement D7835/D7835M-19, Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine
01/01/2019 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1896
Seven laboratories participated in ASTM interlaboratory study ILS#1331 for method D4422-13 (2013), ",Standard Test Method for Ash in Analysis of Petroleum Coke",. Eight green and calcined coke samples of representative origin and ash level were distributed and determined in duplicate. Method D4422 is the responsibility of technical committee D02.05, Properties of Fuels, Petroleum Coke and Carbon Material
01/01/2019 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F13-1005
Interlaboratory Study 1455 was conducted to establish a precision statement for F2913, Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
01/01/2019 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1053
An Interlaboratory Study was conducted to establish a precision statement for C233, Standard Test Method for Air-Entraining Admixtures for Concrete
15/12/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1895
It is the goal of this round robin program to work with participants who already have FTIR instruments installed and are experienced with the products. The supplies and required equipment for this test procedure are described in the Standard Test Methods D7624
01/12/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D05-1050
Interlaboratory Study 1411 was conducted to establish a precision statement for D8213, Standard Practice for Determination of Boron in Coal
01/12/2018 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D08-1019
Intralaboratory Study 1227 was conducted to establish a precision statement for D769418, Test Methods for Self-Adhesive Modified Bituminous Sheet Material
01/12/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D11-1141
Interlaboratory Study 645 was conducted to establish a precision statement for D8238, Test Method for Immunological Assay to Quantify Extractable Guayule Natural Rubber (GNR) Proteins
01/12/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1273
Interlaboratory Study 1567 was conducted to establish a precision statement for D953, Test Method for Bearing Strength of Plastics.
01/11/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1184
Interlaboratory Study 1484 was conducted to establish a precision statement for D6886, Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography.
01/10/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1894
Under the organizing of SRV China Working Group within SAC TC 280 SC5, nine oil samples were selected to be tested at 60°,C and 80°,C by 9 Chinese co-operators. This research report displayed the precision data for oils SRV-tested at +60°,C and +80°,C. The standard precision statements were calculated according to ISO 4259 (or ASTM D6300).
01/10/2018 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E35-1012
Applied Research Associates (ARA) developed a test protocol to assess the disinfection efficacy of ultraviolet germicidal irradiation (UVGI) against N95 filtering facepiece respirator (FFR) coupons contaminated with H1N1 influenza in the presence of various soiling agents (e.g., mucin, sebum)
01/10/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:G01-1028
In 2003, a new ASTM specification, ASTM B928/B928M, Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments, was developed for 5XXX series aluminum alloys for marine applications [Ref 1,2]. ASTM B928/B928M specifies ASTM G67 testing for high magnesium 5xxx products and includes acceptance criteria for mass loss when tested per ASTM G67
01/10/2018 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D05-1051
Interlaboratory Study 1412 was conducted to establish a precision statement for D8010 Standard Practice for Determination of Water Soluble Alkali Content in Coal.
01/09/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D20-1272
Interlaboratory Study 149 was conducted to establish a precision statement for D5594, Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR).
01/08/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F17-1056
Interlaboratory Study 1446 was conducted to establish a precision statement for F3203, Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing.
01/08/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1186
Interlaboratory Study 1416 was conducted to establish a precision statement for C0413, Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
15/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1187
Interlaboratory Study 1417 was conducted to establish a precision statement for C0531, Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
15/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1188
Interlaboratory Study 1418 was conducted to establish a precision statement for C0579, Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
01/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1189
Interlaboratory Study 1419 was conducted to establish a precision statement for C0580, Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes.
01/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1891
The ILS conducted to establish the precision of a new test method titled &ldquo,Automatic Determination of Low-Temperature Viscosity of Automatic Transmission and Hydraulic Fluids and Lubricants using a Rotational Viscometer.&rdquo, This method is a fully automatic version of ASTM D2983.
01/07/2018 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1893
An ILS was conducted to 1) develop updated precision for D7419, 2) develop a correlation between D7419 and D2007. The correlation will allow the use of the more precise D7419 test method for possible use in the interchange of base oils.
01/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D04-1041
Interlaboratory Study 1532 was conducted to establish a precision statement for D8159, Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures.
01/07/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1892
Thirteen laboratories participated in ASTM interlaboratory study ILS0670 for test method ASTM D5003-06a (2017) ",Standard Test Method for The Hardgrove Grindability Index (HGI) of Petroleum Coke",. Ten green coke samples of representative origin and HGI levels within the range 35 to 115 were distributed and determined in duplicate. Method D5003 is the responsibility of technical committee D02.05, Properties of Fuels, Petroleum Coke and Carbon Material. The study was organized by Dennis Shaw of SGS.
15/06/2018 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1889
This intralaboratory study was conducted with the purpose of obtaining the precision of using D2887 Procedure B using alternative carriers Hydrogen and Nitrogen. This intralaboratory study also determined the Bias of using Hydrogen versus Helium and the Bias for Nitrogen versus Helium by applying D6708. In both cases Helium was used as the Reference Method.
01/06/2018 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D11-1142
Interlaboratory Study 1370 was conducted to establish a precision statement for D8016, Test Method for Silica, Precipitated, Hydrated&mdash,Sears Number
01/06/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1067
An intralaboratory study to was conducted to establish precision statements for ASTM D8207. This test method covers the determination of aluminum, chromium, cobalt, titanium, iron, manganese, molybdenum, sodium and nickel in purified terephthalic acid (PAT) by graphite furnace atomic absorption (GFAA) spectrometry.
01/06/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D18-1024
Interlaboratory Study 1339 is an ASTM interlaboratory study undertaken to develop the precision and bias data for D8167, a test method using low-activity nuclear gauge to measure the wet (bulk) density of in situ soil.
15/05/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1270
Interlaboratory Study 1397 was conducted to establish a precision statement for D4273, Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols.
01/04/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1271
Interlaboratory Study 1398 was conducted to establish a precision statement for D4875, Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols.
01/04/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D28-1008
Interlaboratory Study 1125 was conducted to establish a precision statement for D8176, Test Method For Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh).
01/03/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F02-1042
Interlaboratory Study 1072 was conducted to establish a precision statement for F3300, Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
15/02/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1065
An intralaboratory study was conducted to expand the precision statement for D8087, Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry.
01/02/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D16-1066
An intralaboratory study was conducted to expand the precision statement for D3366, Standard Test Method for Color of Maleic Anhydride in the Molten State and after heating (Platinum-Cobalt Scale).
01/02/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D35-1024
Interlaboratory Study 1047 was conducted to establish a precision statement for D6566, Measuring Mass per Unit Area of Turf Reinforcement Mats.
01/02/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D35-1025
Interlaboratory Study 1046 was conducted to establish a precision statement for D6525, Test Method for Measuring Nominal Thickness of Rolled Erosion Control Products.
01/02/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D35-1026
Interlaboratory Study 1045 was conducted to establish a precision statement for D6818, Test Method for Ultimate Tensile Properties of Rolled Erosion Control Products.
01/02/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E35-1011
This Intralaboratory Study was conducted to establish a preliminary repeatability statement for ASTM Test Method E3151. Testing within this study was conducted by a single laboratory which performed three rounds of testing using four samples of tube specimens and four samples of yarn specimens.
01/02/2018 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D01-1183
Interlaboratory Study 1184 was conducted to establish a precision statement for D5235, Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products.
15/01/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E37-1051
An Intralaboratory Study was conducted in 2008 to establish a preliminary precision statement for E3142-18 a new Method for the Thermal Lag of Thermal Analysis Apparatus.
15/01/2018 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1050
An interlaboratory study was conducted by 22 laboratories which tested two specimen sizes to establish the precision statement of test method C78/78M-15b17
01/01/2018 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1883
It is the goal of this round robin program to work with participants who already have FTIR instruments installed and are experienced with the products. The supplies and required equipment for this test procedure are described in the Standard Test Methods D7418, D7412, D7414, D7415, D7624 and D7844.
01/01/2018 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D16-1064
An intralaboratory study was conducted by one laboratory which tested purified terephthalic acid (PTA) to establish the precision statements of test method D8063.
01/01/2018 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1876
Inter Laboratory Study (ILS) #1387 was designed and performed to develop the precision and bias of the new &ldquo,coalescer cell-DB&rdquo, for ASTM D7261, Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer.
01/12/2017 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1877
This ILS #1451 is to establish precision statistics for the current &ldquo,D&rdquo, cell in ULSD used in Procedure A. These results and the results of the previous ILS #1387 will be included in the modification of D7261 as Procedure A using the &ldquo,D&rdquo, cell and Procedure B using the &ldquo,DB&rdquo, cell.
01/12/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1882
D3606 was improved by using capillary columns for the gas chromatographic separation. It enhances the separation between benzene and ethanol which currently is blended into gasoline. It is currently proposed that the capillary configuration to be Procedure A in D3606. This research report summarizes the ILS for the capillary or Procedure A only.
01/12/2017 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:C21-1020
An interlaboratory study was conducted by eight laboratories testing six samples to establish precision statements for ASTM C373.
01/11/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1878
This interlaboratory study was conducted to Establish Precision Statements for D7420, Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine. It was elaborated in cooperation with the DIN 51834 working group. The DIN 51834 has incorporated based on round robin tests performed in 2003, 2004 and 2006 modifications onto this TRW-procedure and add the precision statements.
01/11/2017 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D08-1020
An NMR method to quantify the content of PVC and KEE in roofing membranes was refined and validated. A polymer extraction and purification procedue was expanded, detailed, and clarified more so than before. The current procedue is such that it provides the basis for an ASTM standard specification
01/11/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D19-1197
An intralaboratory study was conducted by one laboratory testing twenty-five samples to establish a precision statement for ASTM D8028.
01/11/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E10-1000
An intralaboratory study was conducted by one laboratory testing three samples to establish a precision
01/11/2017 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:F02-1041
Interlaboratory Study 1178 was conducted to establish a precision statement for F3287, Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method.
01/11/2017 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1875
An interlaboratory study was conducted by eight laboratories testing three samples to establish precision statements for ASTM D4929.
15/10/2017 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1867
An interlaboratory study was conducted by three laboratories testing eight samples to establish precision statements for ASTM D8148.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1868
An interlaboratory study was conducted by eight laboratories testing three samples to establish precision statements for ASTM D8150.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1869
An interlaboratory study was conducted by fourteen laboratories testing sixteen samples to establish precision statements for ASTM D664.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1870
An interlaboratory study was conducted by ten laboratories testing ten samples to establish precision statements for ASTM D2699.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1871
An interlaboratory study was conducted by ten laboratories testing ten samples to establish precision statements for ASTM D2699.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1872
An interlaboratory study was conducted by three laboratories testing heater tubes to establish precision statements for ASTM D3241.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1873
An interlaboratory study was conducted by fifty-two laboratories testing three samples to establish precision statements for ASTM D6425.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D11-1140
An intralaboratory study was conducted by one laboratory testing three samples to establish a precision statement for ASTM D8115.
01/10/2017 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D16-1062
An intralaboratory study was conducted by one laboratory testing one sample to establish a precision statement for ASTM D8130.
01/08/2017 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D30-1009
An intralaboratory study was conducted by one laboratory testing twenty-one samples to establish a precision statement for ASTM D8132.
01/08/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1866
Intralaboratory Study 1476 was conducted to establish a precision statement for D8098, Test Method For Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector.
15/07/2017 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D19-1196
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for ASTM D7678.
15/07/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:G02-1017
An interlaboratory study was conducted by four laboratories testing one sample to establish a precision statement for ASTM G98.
15/07/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1051
Interlaboratory Study 1006 was conducted to evaluate the ruggedness of and develop a temporary precision statement for C1849, Test Method for Density and Air Content (Pressure Method) of Freshly Mixed Roller-Compacted Concrete. The ruggedness evaluation was executed per ASTM C1067-12 to determine the sensitivity of the test method to changes in levels of pertinent operating factors.
01/07/2017 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1862
An interlaboratory study was conducted by twelve laboratories testing twelve samples to establish a precision statement for ASTM D8126.
01/07/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1863
An interlaboratory study was conducted by seven laboratories testing three samples to establish precision statements for ASTM D7043.
01/07/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1865
An interlaboratory study was conducted by six laboratories testing twelve samples to establish precision statements for ASTM D8127.
01/07/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E12-1009
An Interlaboratory Study was conducted to establish a precision statement for ASTM D-5767, Standard Test Methods for Instrumental Measurement of Distinctness-of-Image of Coated Surfaces
15/06/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C11-1003
An interlaboratory study was conducted by seventeen laboratories testing two samples to establish precision statements for ASTM C0471M.
01/06/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1864
An interlaboratory study was conducted by six laboratories testing twelve samples to establish a precision statement for ASTM WK57205.
01/06/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C16-1047
An interlaboratory study was conducted by ten laboratories testing two samples to establish precision statements for ASTM C518.
01/05/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1855
An interlaboratory study was conducted by eleven laboratories testing twenty-nine samples to establish a precision statement for ASTM D7344.
01/05/2017 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1856
An interlaboratory study was conducted by seven laboratories testing fifteen samples to establish precision statements for ASTM D8092.
01/05/2017 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1858
To determine the validity of the test method D8110-17 an ILS was conducted under the auspices of D02.SC 3 Committee in the spring of 2016. Ten laboratories tested three materials.
01/05/2017 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1860
A repeatability study was conducted by one operator testing ten samples to establish a precision statement for ASTM WK#55105.
01/05/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1049
An Interlaboratory Study was conducted to establish a precision statement for Test Method C231/C231M, Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method. The current test method contains precision information for the Type A meter only. This study was conducted to establish precision information using the Type B meter and this report outlines details of the work that was performed, participants involved, and results obtained during the study.
15/04/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D13-1144
An interlaboratory study was conducted by six laboratories testing five samples to etablish a precision statement for ASTM D7983.
01/03/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D13-1145
An intralaboratory study was conducted by two operators testing two samples to establish a precision statement for ASTM D1683.
01/03/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D18-1023
An interlaboratory study was conducted by eight laboratories testing six samples to establish a precision statement for ASTM D6475.
15/02/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E54-1002
An interlaboratory study was conducted by one laboratory testing one sample to establish a repeatability statement for ASTM E3068.
01/02/2017 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C24-1063
An interlaboratory study was conducted by seven laboratories testing one sample to establish precision statements for ASTM C1735.
01/01/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1848
Interlaboratory Study 1334 was conducted to establish a precision statement for D8097, Test Method For Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke using a Trans Axial Pressure Pycnometer.
01/01/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1852
An interlaboratory study was conducted by ten laboratories testing ten samples to establish precision statements for ASTM D445.
01/01/2017 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D20-1268
An intralaboratory study was conducted by one laboratory testing seven samples to establish a precision statement for ASTM D8069.
01/01/2017 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E01-1126
An interlaboratory study was conducted by ten laboratories testing thirty-two samples to establish a precision statement for ASTM E3061.
01/01/2017 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:C09-1047
An interlaboratory study was conducted by eight laboratories testing two samples to establish precision statements for ASTM C1708.
15/12/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1048
An interlaboratory study was conducted by twenty-two laboratories testing one sample to establish precision statements for ASTM C0989.
15/12/2016 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1846
An interlaboratory study was conducted by twenty one laboratories testing sixteen samples to establish precision statements for ASTM D7751.
15/12/2016 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D01-1181
An interlaboratory study was conducted by six laboratories testing three samples to establish precision statements for ASTM D2197.
01/12/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1182
An interlaboratory study was conducted by six laboratories testing three samples to establish precision statements for ASTM D5178.
01/12/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D19-1194
An interlaboratory study was conducted by eight laboratores testing twelve samples to establish a precision statement for ASTM D8083.
01/12/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E37-1049
A single laboratory intralaboratory study was conducted to establish precision statements for ASTM WK52436 to Add StormerViscometer Procedures to ASTM E2975-17.
01/12/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1844
An interlaboratory study was conducted by eight laboratories testing fourteen samples to establish precision statements for ASTM D8070.
15/11/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1850
The test procedure for determining extreme pressure properties of lubricating greases using a high-frequency, linear-oscillation (SRV) test machine was first published by ASTM as ASTM D5707-95 and several times modified and re-approved since then and is intended to be converted as DIN 51834, part 6, homologue.
15/11/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E01-1125
An Interlaboratory Study was conducted to establish precision statements for E1450-09, Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium.
15/11/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E28-1046
An interlaboratory study was conducted by six laboratories testing one material to establish precision
15/11/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D08-1018
An interlaboratory study was conducted by seven laboratories testing three samples to establish precision statements for ASTM E1918.
01/11/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C09-1052
Interlaboratory Study 29 was conducted to establish a precision statement for C0403/C0403M, Test Method For Time of Setting of Concrete Mixtures by Penetration Resistance.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1843
This report presents the results from a precision study for a new method to determine the water separation property of aviation fuels. 16 samples were tested in blind duplicate with 8 operators and instruments, making a total of 256 tests. The samples included a variety of jet fuels and additives. The objective of the ILS was to establish the precision of the method D8073 and write a precision statement for the test method in conformance with Practice D6300.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1845
An interlaboratory study was conducted by thirty-four participants testing six grease samples to establish precision statements for ASTM D5707.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1847
An interlaboratory study was conducted by five laboratories testing two samples to establish precision statements for ASTM C747.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1851
An interlaboratory study was conducted to test the functional profile of hydraulic oils in co-operation with ASTM D7043 by using the follow ASTM test methods: D6425, D7421, D7755.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E08-1012
An interlaboratory study was conducted by ten laboratories testing six samples to establish a precision statement for ASTM E2948.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F04-1015
An interlaboratory study was conducted by six laboratories testing 100 samples and one laboratory testing 125 samples to establish precision statements for ASTM F3212.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F08-1014
An interlaboratory study was conducted by eleven laboratories testing one sample to establish a precision statement for ASTM F3022.
01/10/2016 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D05-1048
An interlaboratory study was conducted by seventeen laboratories testing thirteen samples to establish precision statements for ASTM D5373.
01/09/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F17-1055
An interlaboratory study was conducted by one laboratory testing four samples to establish a precision statement for ASTM F3203.
01/08/2016 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1841
An interlaboratory study was conducted by ten laboratories testing eight samples to establish precision statements for ASTM D7097.
01/07/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D11-1139
An interlaboratory study was conducted by four laboratories testing twelve samples to establish a precision statement for ASTM D6499.
01/07/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D13-1143
An interlaboratory study was conducted by five laboratories testing two samples to establish precision statements for ASTM D8054.
01/07/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C09-1046
An interlaboratory study was conducted by eleven laboratories testing two samples to establish precision statements for ASTM C535.
15/06/2016 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1835
An interlaboratory study was conducted by ten laboratories testing eight samples to establish precision statements for ASTM D1321.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1836
A round robin was conducted by seven participants testing three samples to compare ASTM D4742 results from instruments with direct heating versus liquid heating baths.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1838
An interlaboratory study was conducted to revise and establish a new precision statement for ASTM D1552, Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1842
An interlaboratory study was conducted by ten laboratories testing twelve samples to establish precision statements for ASTM D8045.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1059
An interlaboratory study was conducted by six laboratories testing ten samples to establish a precision statement for ASTM D7536.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D16-1060
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for ASTM D7183.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1061
An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for ASTM D7704.
01/06/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1837
An interlaboratory study was conducted by twenty-two laboratories testing ten samples to establish precision statements for ASTM D7042.
15/05/2016 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D15-1035
An interlaboratory study was conducted by six laboratories testing fifteen samples to establish a precision statement for ASTM D7304.
15/05/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E08-1011
An interlaboratory study was conducted by eight laboratories testing one material to establish a precision statement for ASTM E1921.
15/05/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:A01-1004
An interlaboratory study was conducted by nine laboratories testing one sample to establish precision statements for test method A630.
01/05/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D20-1265
An interlaboratory study was conducted by six laboratories testing thirty-nine samples to establish a precision statement for ASTM D6150.
01/05/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E08-1010
An interlaboratory study was conducted by ten laboratories testing six samples to establish a precision statement for ASTM E2948.
01/05/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E08-1013
An interlaboratory study was conducted by seven laboratories testing one pipe to establish a precision statement for ASTM E3039.
01/05/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F06-1011
An interlaboratory study was conducted by six laboratories testing eight samples to establish a precision
01/05/2016 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1829
An interlaboratory study was conducted by seven laboratories testing ten samples to establish precision statements for ASTM D7576.
01/04/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1830
An interlaboratory study was conducted by twenty laboratories testing three samples to establish reference fluid ARVs for ASTM D5188.
01/04/2016 - PDF - Anglais - ASTM
En savoir plus50,40 € -
ASTM Research Report RR:D05-1047
An interlaboratory study was conducted by twenty-two laboratories testing thirty-two samples to establish precision statements for ASTM D3402.
01/04/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C16-1045
An interlaboratory study was conducted by seven laboratories testing four samples to establish precision statements for ASTM E96.
01/03/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1057
This test method covers the determination of acid number in terephthalic acid (TA) by automatic potentiometric titration. For PTA, acid number is usually within 674 to 676 mg KOH/g
01/03/2016 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D16-1058
This test method covers the determination of acid number in terephthalic acid (TA) by color-indicator titration. For TA product, acid number is usually within 674 - 676 mg KOH/g.
01/03/2016 - PDF - Anglais - ASTM
En savoir plus50,40 € -
ASTM Research Report RR:E06-1006
An interlaboratory study was conducted by twenty-five laboratories testing three samples to establish a precision statement for ASTM E1680.
01/03/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1827
An interlaboratory study was conducted by six laboratories testing six samples to establish precision statements for ASTM D7423.
15/02/2016 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D13-1142
An intralaboratory study was conducted by one laboratory testing five samples to establish a precision statement for D7984.
15/02/2016 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D02-1834
An interlaboratory study was conducted by twelve laboratories testing twelve samples to estimate the precision of ASTM D7279.
10/02/2016 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D13-1141
An interlaboratory study was conducted by two laboratories testing eight samples to establish a precision statement for ASTM D7812.
01/01/2016 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D35-1023
An interlaboratory study was conducted by nine laboratories testing two samples to establish a precision statement for ASTM D7005.
01/01/2016 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1822
An interlaboratory study was conducted by fourteen laboratories testing 18 samples to establish precision statements for ASTM D7795.
15/12/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1824
An interlaboratory study was conducted by ten laboratories testing five samples to establish precision statements for ASTM D7342.
15/12/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1825
An interlaboratory study was conducted by ten laboratories testing five samples to establish precision statements for ASTM D8022.
15/12/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D01-1180
An interlaboratory study was conducted by six laboratories testing five samples to establish precision statements for ASTM D8020.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1812
An interlaboratory study was conducted by 9 participants to establish a precision statement for ASTM D7463.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1813
A study was conducted to establish that ASTM D1319, with specific adjustments based on results from D86-T95, meets EPA requirements for use as an alternative method the volume percent of aromatics in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D02-1814
A study was conducted to establish that ASTM D5580, with specific adjustments based on results from D86-T95, meets EPA requirements for use as an alternative method to determine the volume percent of aromatics in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1815
A study was conducted to establish that ASTM D5580 meets EPA requirements for use as an alternative method to determine the volume percent of benzene in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1816
A study was conducted to establish that ASTM D5769 meets EPA requirements for use as an alternative method to determine the volume percent of benzene in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D02-1817
A study was conducted to establish that ASTM D6550 meets EPA requirements for use as an alternative method to determine the volume percent of olefins in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1818
A study was conducted to establish that ASTM D6839 meets EPA requirements for use as an alternative method to determine the volume percent of olefins in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1819
A study was conducted to establish that ASTM D4815 meets EPA requirements for use as an alternative method to determine the mass percent of ethanol in gasoline.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D02-1820
This Research Report compiles the relevant information of the four research reports (D02-1780, D02-1787, D02-1788, D02-1790) which descibe the work of the Grand Design ILS. The intent of this report is to consolidate the pertinent information from the other research reports to make it easier for a user of D445 to find all critical precision information in one place.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D20-1264
An intralaboratory study was conducted by one laboratory testing four samples to establish a precision statement for ASTM D8019.
01/12/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:B08-1007
Interlaboratory Study to Establish Precision Statements for ASTM B975-15, Test Method For Measurement of Internal Stress of Metallic Coatings by Split Strip Evaluation (Deposit Stress Analyzer Method)
15/11/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E01-1122
Interlaboratory Study to Establish Precision Statements for ASTM E415-15, Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry
15/11/2015 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:G02-1015
Interlaboratory Study to Establish Precision Statements for ASTM G204-15, Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
15/11/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:B08-1008
Interlaboratory Study to Establish Precision Statements for ASTM B636-15, Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer
01/11/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D18-1022
Intralaboratory Study to Establish Precision Statements for ASTM D7380- 15, Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
01/11/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:F02-1040
Interlaboratory Study to Establish Precision Statements for ASTM F3039- 15, Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
01/11/2015 - PDF - Anglais - ASTM
En savoir plus54,00 € -
ASTM Research Report RR:F11-1022
An interlaboratory study was conducted by eight laboratories testing four samples to establish precision statements for ASTM F2608.Process.
01/11/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F17-1053
Interlaboratory Study to Establish Precision Statements for ASTM F2634-15, Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
01/11/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:F17-1054
An interlaboratory study was conducted by six laboratories testing one type of valve to establish precision statements for F1802.
01/11/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:G01-1027
An interlaboratory study was conducted by six laboratories testing five concrete samples to establish a precision statement for ASTM C876.
01/11/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:C16-1044
An interlaboratory study was conducted by seven laboratories testing five samples to establish precision statements for ASTM C550.
15/10/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1821
An interlaboratory study was conducted by sixteen laboratories testing ten samples to establish precision statements for ASTM D2983.
15/10/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E35-1010
Interlaboratory Study to Establish Precision Statements for ASTM E3031-15, Test Method for Determination of antibacterial activity on Ceramic Surfaces
15/10/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:B09-1023
Interlaboratory Study to Establish Precision Statements for ASTM B797-15, Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts
01/10/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:C16-1043
An interlaboratory study was conducted by six laboratories testing one sample to establish precision statements for ASTM C209.
01/10/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D02-1806
Interlaboratory Study to Establish Precision Statements for ASTM D7798-15, Test Method for Boiling Range Distribution of Petroleum Distillates With Final Boiling Points up to 538�,C by Ultra Fast Gas Chromatography (UF GC)
01/10/2015 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D30-1008
Interlaboratory Study to Establish Precision Statements for ASTM D7291/D7291M-15, Through-Thickness Flatwise Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
01/10/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:E28-1045
Interlaboratory Study to Establish Precision Statements for ASTM E2546-15, Standard Practice for Instrumented Indentation Testing
01/10/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D13-1140
Interlaboratory Study to Establish Precision Statements for ASTM D4685-15, Test Method for Pile Fabric Abrasion
01/08/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F40-1005
Interlaboratory Study to Establish Precision Statements for ASTM F2617-15, Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry
01/08/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D13-1139
Interlaboratory Study to Establish Precision Statements for ASTM D8007-15, Test Method For Wale and Course Count of Weft Knitted Fabrics
01/07/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1056
Interlaboratory Study to Establish Precision Statements for ASTM D7504-15, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number
01/07/2015 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:E01-1121
Interlaboratory Study for ASTM E1600, Test Method For Determination of Gold in Cyanide Solutions and ASTM D5673, Test Method for Elements in Water by Inductively Coupled Plasma�,Mass Spectrometry
01/07/2015 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:F40-1004
Interlaboratory Study to Establish Precision Statements for ASTM F3078-15, Test Method For Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)
01/07/2015 - PDF - Anglais - ASTM
En savoir plus115,50 € -
ASTM Research Report RR:D02-1804
Interlaboratory Study to Establish Precision Statements for ASTM D3240-15, Test Method for Undissolved Water in Aviation Turbine Fuels
15/06/2015 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D02-1802
An interlaboratory study was conducted by two laboratories testing six samples to establish a precision statement for test method D7918.
01/06/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D11-1111
Interlaboratory Study to Establish Precision Statements for ASTM D3492-15, Specification for Rubber Contraceptives (Male Condoms)
01/06/2015 - PDF - Anglais - ASTM
En savoir plus95,55 € -
ASTM Research Report RR:D18-1021
Intralaboratory Study to Establish Precision Statements for ASTM D7047-15, Test Method For Swell Volume of Plantago Insularis (Ovat, Psyllium)
01/06/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D19-1193
Interlaboratory Study for ASTM D7237, Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
01/06/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D27-1020
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D7151.
01/05/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:E37-1046
Interlaboratory Study to Establish Precision Statements for ASTM E2603-15, Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
01/05/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F40-1003
Interlaboratory Study to Estab sh Precision Statements for ASTM F3139-15, Test Method For Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry
01/05/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:E12-1008
An interlaboratory study was conducted by four laboratories testing sixteen samples to establish a precision statement for test method D4449.
01/04/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:F02-1038
An interlaboratory study was conducted by ten laboratories testing three samples to establish a precision statement for test method F2981.
01/04/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:F02-1039
An interlaboratory study was conducted by four laboratories testing three samples to establish a precision statement for test method F3136.
01/04/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D16-1053
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method D2121.
15/03/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:C08-1025
An interlaboratory study was conducted by twenty-two laboratories testing three samples to establish a precision statement for test method C704.
01/03/2015 - PDF - Anglais - ASTM
En savoir plus102,90 € -
ASTM Research Report RR:D02-1798
It was hypothesized that blends of T Fuel and n-cetane, which is the D613 primary reference fuel having an assigned cetane number of 100, could be used to extend the rating procedure to cover the cetane number range from the T Fuel ARV to 100. This interlaboratory program was therefore undertaken to investigate the suitability of such blends for this purpose.
01/02/2015 - PDF - Anglais - ASTM
En savoir plus89,25 € -
ASTM Research Report RR:D16-1055
Interlaboratory Study to Establish Precision Statements for ASTM D5917-15, Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration
01/02/2015 - PDF - Anglais - ASTM
En savoir plus81,90 € -
ASTM Research Report RR:D05-1045
An interlaboratory study was conducted by two laboratories testing five samples to establish a precision statement for test method D720.
01/01/2015 - PDF - Anglais - ASTM
En savoir plus56,70 € -
ASTM Research Report RR:D35-1021
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D4632.
01/01/2015 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM Research Report RR:D35-1022
An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D4533.
01/01/2015 - PDF - Anglais - ASTM
En savoir plus63,00 €