Rapport US
-
102,00 € -
ASTM Research Report RR:D04-1020
An interlaboratory study was conducted by twenty-one laboratories testing twenty-seven samples to establish a precision statement for test method D6752.
01/01/2003 - PDF - Anglais -
En savoir plus95,55 € -
102,00 €
-
102,00 €
-
102,00 €
-
ASTM Research Report RR:D02-1559
An interlaboratory study was run by ten laboratories testing nine samples to establish a precision statement for test method D7040.
11/12/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F02-1029
Research Report F02-1029 presents the results of the Interlaboratory Study used to establish the establish the precision and bias statement for ASTM D3078-02, Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission. The collaborative study included 3 labs who used method D3078 to detect controlled leaks at three vacuum levels. The research report presents summary method performance statistics as well as the measurement data used to calculate results for the study.
10/12/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1558
An interlaboratory study was run by nine laboratories testing eight gasoline samples and eight diesel samples to establish a precision statement for test method D7041.
20/11/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D13-1113
An interlaboratory study was conducted by two laboratories testing three fabric samples to establish a precision statement for test method D7024.
18/11/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F06-1007
An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F2199.
27/09/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1594
An interlaboratory study was conducted to establish a precision statement for test method D6895. This report summarizes two round robins utilizing the same procedure and different materials.
23/09/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1173
An interlaboratory study performed by ten laboratories which tested six samples to establish the precision statement of test method D6888.
10/09/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C26-1011
An interlaboratory study was conducted by a single laboratory testing three samples to establish a precision statement for test method C1539.
22/08/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F23-1005
An interlaboratory study was conducted by six laboratories which tested three fabric samples to establish the precision statement of test method F1868.
22/08/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1528
An interlaboratory study was conducted by six laboratories testing three different anti-wear hydraulic oils to establish a precision statement for test method D4310.
22/08/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E27-1003
An interlaboratory study was conducted by six laboratories which tested trityl azide in quintuplicate to establish the precision statement of test method E537.
11/07/2002 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D05-1030
An interlaboratory study was conducted by six laboratories to establish a precision statement for test method D6721.
09/07/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1126
An interlaboratory study of the test method D6762 was conducted by six laboratories to determine precision.
08/07/2002 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1525
An interlaboratory study was conducted by ten laboratories testing fourteen fuel samples to establish a precision statement for test method D1840.
03/07/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1524
An interlaboratory study was conducted to establish precision statements for the four standard ASTM Cloud point methods: D2500, D5771, D5772 and D5773. Participants analyzed eleven sample sets comprised of two petroleum distillate fuels, diesel and kerosene, with various biodiesel fuels with a temperature range from +10 to ?45�,C.
03/07/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1518
An interlaboratory study was conducted by six laboratories testing twelve samples to establish a precision statement for test method D6730.
02/07/2002 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1527
An interlaboratory study was conducted by eleven laboratories testing fifteen samples to establish a precision statement for test method D4629.
19/06/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D26-1018
An interlaboratory study was conducted by three laboratories testing standards made up in perchloroethylene with components ranging from 2 ppm to 93 wt.% so a precision statement could be established for practice D6806.
10/06/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D05-1028
An interlaboratory study was conducted by eight laboratories testing nine coal samples, one coke samples, and one lignite samples to establish a precision statement for test method D5865.
28/05/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1035
An interlaboratory study was conducted by nine laboratories which tested nine materials to establish the precision statement of test method E2209.
28/05/2002 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:E15-1059
An interlaboratory study was conducted by seven laboratories which tested two materials to establish the precision statement of test method E1863.
20/05/2002 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:A06-1002
An interlaboratory study was conducted with three blended Epstein specimens of ASTM Type 64D430 material that were circulated to 23 participating laboratories to determine precision and bias when testing CRML steel.
20/05/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D32-1039
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method D6761.
20/05/2002 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F06-1006
An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F410.
20/05/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1522
An interlaboratory study was conducted where laboratories used seven instruments to test thirteen middle distillate fuel samples to establish a precision statement for test method D6748.
13/05/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D16-1029
An interlaboratory study was conducted by fifteen laboratories testing samples of Toluene, Xylene, and Cresol to establish a precision statement for test method D850.
13/05/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E37-1037
An interlaboratory study was conducted by ten laboratories testing a single 0.025 mm thick film sample of polystyrene to establish a precision statement for test method E1824.
10/05/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F17-1048
An interlaboratory study was conducted by six laboratories testing pellets of polyethylene resin to establish a precision statement for test method F2231.
22/04/2002 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1521
An interlaboratory study was conducted where participants analyzed four sets of undyed base fuels and twelve sets of dyed base fuel/color to establish the precision statement for test method D6756.
18/04/2002 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E15-1047
An interlaboratory study was conducted by ten laboratories testing three samples containing approximately 80, 90, and 95% mass sulfuric acid to establish a precision statement for test methods E223.
05/04/2002 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:E37-1027
An interlaboratory study was conducted by seven laboratories. Each laboratory characterized in hextuplicate a commercially available polyethylene Oxidation Induction Time (OIT) reference material to establish the precision statement of test method E2009.
03/03/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D16-1028
An interlaboratory study was conducted to provide a full thermistor precision statement for ASTM D852. One laboratory determined the solidification point of a benzene sample twelve times. Seven different laboratories determined the solidification point of three different benzene samples in triplicate on two different days.
20/02/2002 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D05-1026
An interlaboratory study that was conducted to establish a precision statement for two proposed alternative methods for mercury in coal, D6414 and D6722, and to re-evaluate the precision of test method D3684.
20/02/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F07-1006
An interlaboratory study was conducted by nineteen laboratories measuring computer generated curves and actual photos through aircraft windscreens to establish a precision statement for test method F2156.
20/02/2002 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:F11-1013
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method F608.
29/01/2002 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F23-1006
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method F2298.
01/01/2002 - PDF - Anglais -
En savoir plus56,70 € -
102,00 €
-
102,00 €
-
ASTM Research Report RR:D02-1517
An interlaboratory study was conducted by laboratories to determine the precision of Mini-Rotary Viscometer yield stress and viscosity of highly sooted diesel engine oils for test method D4684.
07/12/2001 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D14-1009
An interlaboratory study was run in which test specimens of one material (solvent-based elastomeric adhesive) was tested for Dry Shear strength in each of six laboratories to establish the precision statement of test method D3498.
21/11/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1033
An interlaboratory study was conducted by six laboratories which tested two materials to establish the precision statement of test method E248.
21/11/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1509
An interlaboratory study was conducted by five laboratories testing eleven samples to evaluate the precision of test method D5772.
11/10/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1512
An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D6732.
11/10/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1510
An interlaboratory study was conducted by ten laboratories testing eleven samples to evaluate the precision of test method D5273.
11/10/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1508
An interlaboratory study was conducted by ten laboratories testing eleven different samples to evaluate the precision of test method D5771.
11/10/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1514
An interlaboratory study was conducted by seven laboratories testing twelve fuel samples to establish a precision statement for test method D6728.
11/10/2001 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1511
An interlaboratory study was conducted by thirteen laboratories testing eight oils to establish a precision statement for test method D5133. The samples measured in the study covered the viscosity range from 5000 to 40,000 mPa(s).
11/10/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D26-1016
An interlaboratory study was conducted by seven laboratories to establish a precision statement for Method A and Method B in standard D2989.
02/10/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D26-1017
An interlaboratory study was conducted by laboratories testing a standard of 9.8 ppm olive oil in trichloroethylene to establish a precision statement for test methods D and E of D2109.
02/10/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D04-1019
An Inter-Laboratory Study was conducted to establish precision statements for ASTM D6703, Standard Test Method for Automated Heithaus Titrimetry.
05/09/2001 - PDF - Anglais -
En savoir plus56,70 € -
NACE 5A171-2001
Materials for Receiving, Handling, and Storing Hydrofluoric Acid
01/09/2001 - PDF - Anglais -
En savoir plus192,00 € -
ASTM Research Report RR:D05-1025
An Interlaboratory Study was conducted to establish precision statements for ASTM D5865, Standard Test Method for Gross Calorific Value of Coal and Coke. A ruggedness test trial (T1) completed in the year 2000 confirmed that disks made of quartz fiber are suitable for this purpose. A modification to the design of the quartz fisks tested in trial (T2), which eliminates contact of the coke sample with the sides of the combustion crucible reduced the variability of the results.
09/08/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1595
An interlaboratory study was conducted by six laboratories testing oils at -26�,C and five laboratories testing oils at -40�,C to establish a precision statement for test method D6821.
06/08/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E27-1002
An interlaboratory study was conducted by eight laboratories which tested one material at five heating ratings to establish the precision statement of test method E698.
27/07/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F16-1000
An interlaboratory study was conducted by four laboratories which tested square bar specimens at five different conditions, four under different applied potentials and one in air to establish the precision statement of test method F1940.
27/07/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D05-1024
An interlaboratory study was conducted by laboratories testing samples of varying coal ranks to establish a precision statement for test method D2961.
27/07/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1170
An interlaboratory study was conducted by twelve laboratories testing ten samples in each of 3 matrices: reagent water spiked with KHP, reagent water spiked with KHP and chloride and ASTM substitute waster water, to establish a precision statement for test method D6697.
27/07/2001 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1507
An interlaboratory study was conducted by fourteen laboratories testing fifteen samples to establish a precision statement for test method D5762.
26/06/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D34-1013
This research report describes the study that was conducted to generate data on the performance of the En Core sampler to store soils spiked with low level concentrations of VOCs, as well as the study conducted to generate data on the performance of the 25-gram En Core sampler to store samplers spiked with EPA Method 1311 volatile organic analytes. These data are presented in appendices X1 and X2 of ASTM Practice D6418.
29/05/2001 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:F02-1016
An interlaboratory study was conducted by five laboratories, each testing three samples to establish a precision statement for test method D2095.
29/05/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C16-1025
An interlaboratory study done in six laboratories to establish the precision of the density test method C303.
29/05/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D35-1009
An interlaboratory study was conducted by five laboratories testing a geonet and a geocomposite material to establish a precision statement for test method D5199.
20/05/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1506
An interlaboratory study was conducted by laboratories testing samples in n-butane, isobutane, and a propane/propylene mix to establish a precision statement for test method D6667.
09/05/2001 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:B09-1011
An interlaboratory study was performed by nine laboratories testing two tungsten carbide powders in the laboratory-milled condition to establish a precision statement for test method B761. This report has been published in the absence of any other precision estimates for B761, despite not testing enough materials to provide statistically valid results as per ASTM Standard Practice E691.
23/04/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1503
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6591.
23/04/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F03-1015
An interlaboratory study was conducted by eleven laboratories which tested two materials to establish the precision statement of test method F146.
23/04/2001 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D21-1000
An interlaboratory study was conducted by six laboratories testing two polish samples to establish a precision statement for test method D2047.
18/04/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1169
An interlaboratory study performed by nine laboratories to establish the precision statement of test method D6592.
04/04/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1485
An interlaboratory study was conducted for test method D6616 to establish a precision statement for the measurement of HTHSV at 100 degrees C.
04/04/2001 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1218
An interlaboratory study was conducted by fifteen laboratories testing eight materials to establish a precision statement for test method D2863.
20/03/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1500
An interlaboratory test was conducted by eleven laboratories testing eleven samples to establish a precision statement for test method D3831.
22/02/2001 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1499
An interlaboratory study was conducted to establish precision for test method D6749 using 1 degree C test increments in measuring pour point.
22/02/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E37-1026
An interlaboratory study was conducted by fourteen laboratories testing five samples to establish a precision statement for test method E1952.
22/02/2001 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D01-1123
An interlaboratory study was conducted to determine the precision of automatic D1078 under reproducibility conditions. Also included was the determination of D1078 results using manuel distillation to determine the relative bias between automatic and manual D1078 results and whether these results from both are statistically equivalent.
09/02/2001 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1498
An interlaboratory study was conducted by thirty laboratories testing ten samples to establish a precision statement for test method D445.
09/02/2001 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D01-1122
An interlaboratory study was conducted to determine the precision of the test method D6229 under repeatability and reproducibility conditions.
09/02/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1216
An interlaboratory test was conducted by six laboratories testing four materials to establish a precision statement for test method D4094.
09/02/2001 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D15-1020
An interlaboratory study performed by eight laboratories which tested five coolant materials to establish the precision statement of test method D6660.
08/02/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1496
An interlaboratory study was conducted to evaluation precision of the test method D4741 at 100 degrees C on non-Newtonian test oils.
02/01/2001 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1497
An interlaboratory study was conducted to evaluation precision of the test method D4741 at 150 degree C on non-Newtonian test oils.
02/01/2001 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1495
An interlaboratory study was conducted to generate precision data for the test method D6559.
20/12/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1494
An interlaboratory study was conducted to generate precision data for the test method D6558.
20/12/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1487
An interlaboratory study was conducted by fourteen laboratories analyzing eleven oil samples to determine a precision statement for test method D6595.
16/12/2000 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1493
An interlaboratory study was conducted for test method D1218 to establish a precision statement for automatic refractometers for measuring the refractive index of liquids at 20 degree C.
14/12/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1215
An interlaboratory study was conducted by nine laboratories to establish a precision statement for Procedure B in test method D5630. The ASTM and ISO test procedures for the determination of ash in polyamides and thermoplastic polyesters are similar but do require different temperatures for the ash analysis. This round robin conducted per ASTM E 691 was designed to determine the equivalency of results at the two ash temperatures, 900 �,C in ASTM D 5630 and 850 �,C in ISO 3451. In addition the ASTM and ISO standards require ashing the sample to a constant weight which adds additional time to the analysis. Therefore, a secondary objective of this round robin was to evaluate the time required to reach a constant weight.
14/12/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C08-1018
An interlaboratory study was conducted by four laboratories testing four refractory materials to establish precision statements for test method C24.
14/12/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F17-1046
An interlaboratory study was conducted by nine laboratories testing four HDPE materials to establish a precision statement for test method F2136.
01/12/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F17-1047
An interlaboratory study was conducted by five laboratories testing DWV sanitary tees to establish a precision statement for specification F2135.
01/12/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1213
Research report D20-1213 details an interlaboratory study that was conducted for the test methods in the standard specifications D5857 and D4101 to establish precision statements for D4101. This study was conducted to evaluate the effect of sample preparation on the precision of the data determined by the various testing procedures specified for the Polypropylene callouts in D4101. The study conducted for D5857 was performed to provide possible data for correlation studies and to determine if there were any significant differences in data reproducibility between the two systems.
28/11/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D01-1119
An interlaboratory study was conducted by four laboratories testing four paint samples to establish a precision statement for test method D5895.
07/11/2000 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1486
An interlaboratory study was performed by eleven laboratories on twelve samples to establish a precision statement for test method D2983.
16/10/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1489
An interlaboratory study was conducted by eighteen laboratories testing five oils to establish a precision statement for test method D6200. The oils represented the ranges for the six primary cooling curve characteristics.
06/10/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:F02-1014
An interlaboratory study was conducted by ten laboratories which tested four packaged sets for each of two material types to establish the precision statement of test method F2054.
28/09/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D20-1211
This report describes an interlaboratory study that studies the repeatability of test method D1894 for temperatures other than 23�,C.
28/09/2000 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1092
An interlaboratory study was conducted by seven laboratories testing three rubbers, VMQ, FKM, and HNBR, to establish a precision statement for test method D6515.
19/09/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1091
An interlaboratory study was conducted by six laboratories testing twenty-one materials of varying hardness to establish a precision statement for Type M durometers in test method D2240.
01/09/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1118
An interlaboratory study was conducted in which one operator in ten laboratories tested 2-ethylhexanol with a purity value of 99.653 and which contained 0.203 weight % of ethyl methyl pentanol to establish a precision statement for test method D5008.
01/09/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1031
An interlaboratory study was conducted by nine laboratories testing seven samples to establish a precision statement for test method E2209.
01/09/2000 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D20-1210
An interlaboratory study was conducted by eight laboratories testing six samples to establish a precision statement for test method D6437.
18/08/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1208
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D4671.
18/08/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1209
An interlaboratory study was conducted by twelve laboratories testing three polyol samples with water contents of approximately 0.03, 0.42, and 1.6% to establish a precision statement for the automated procedure in test method D4672.
18/08/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C16-1024
An interlaboratory study was run in which randomly drawn test specimens of two materials were tested for moisture sorption to establish precision statements for C1104.
12/07/2000 - PDF - Anglais -
En savoir plus56,70 € -
NACE 7H100-2000
Evaluation of Boiler Tube Deposit Mass Loading (Deposit Weight Density) Methodology
01/07/2000 - PDF - Anglais -
En savoir plus192,00 € -
ASTM Research Report RR:D02-1483
An interlaboratory study was conducted to establish a precision statement for test method D6557.
22/06/2000 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C14-1002
An interlaboratory round robin testing was conducted in accordance with Practice E 691 to establish the precision and bias of surface stress measurements (Procedure A) for C1279.
22/06/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1478
An interlaboratory study was conducted by six laboratories testing thirteen samples to establish a precision statement for test method D6550.
08/06/2000 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D13-1105
An interlaboratory study was conducted by a single laboratory testing two fabric samples to establish a preliminary precision statement for test method D6545.
12/05/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:B09-1010
Research report B09-1010 describes the results of an interlaboratory study to determine the precision for B330 done in five laboratories using tungsten carbide powders in both the as-supplied and laboratory-milled conditions. This report has been published in the absence of any other precision estimates for B330, despite not having enough laboratories to provide statistically valid results as per ASTM Standard Practice E691.
12/05/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E05-1011
An interlaboratory study was conducted by six laboratories testing four twin size mattresses to establish a precision statement for test method E1590.
04/04/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:F02-1013
An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method F1886.
04/04/2000 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D19-1168
This interlaboratory study was performed by seven operators in four laboratories analyzed each of four samples (three cooling tower samples and one spiked control sample) in triplicate to establish the precision statement of test method D6530.
03/04/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D35-1008
An interlaboratory study was conducted by nine laboratories which tested four materials to establish the precision statement of test method D4716.
03/04/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E12-1000
An interlaboratory study was conducted by five laboratories which tested six materials to establish the precision statement of test method E2073.
22/03/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D13-1104
An interlaboratory study was conducted by seven laboratories testing five uncoated fabrics covering a range of permeabilities to establish a precision statement for test method for D6476.
09/03/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:C26-1010
An interlaboratory study was conducted to establish a precision statement for C1430.
29/02/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D22-1029
An interlaboratory study was conducted by six laboratories testing sets of eighteen spiked samples to establish a precision statement for test method D6494.
29/02/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C26-1009
An interlaboratory study was conducted to establish a precision statement for C1457.
29/02/2000 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1029
An interlaboratory study was conducted by seven laboratories which tested seven materials to establish the precision statement of test method E2050.
18/02/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1028
An interlaboratory study was conducted by a single laboratory testing two samples to establish a precision statement for test method E1659.
14/01/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1165
An interlaboratory study was conducted by eleven laboratories testing samples to establish a precision statement for test method D6508.
14/01/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D19-1167
An interlaboratory study performed by nine laboratories which tested eighteen materials to establish the precision statement of test method D6503.
14/01/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1164
An interlaboratory study was conducted by twelve laboratories testing eight samples to establish a precision statement for test method D6581.
14/01/2000 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D04-1018
An interlaboratory study was conducted by six laboratories to establish a precision statement for test method D4792.
10/01/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1476
An interlaboratory study was conducted for test method D2624 to establish a precision statement for the MLA900 instrument.
10/01/2000 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D27-1013
An interlaboratory study was conducted by thirty-six laboratories which tested nine materials to establish the precision statement of test method D4059.
03/01/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1475
An interlaboratory study was conducted for test method D5453 to establish a precision statement for sulfur content in gasoline, diesel, bio-diesel and kerosene.
03/01/2000 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E05-1009
An interlaboratory study was conducted by six laboratories testing ninety-six specimens to establish a precision statement for test method E1352.
03/01/2000 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:A06-1001
Commercially produced dc hysteresigraphs are the predominate method of measurement of the dc magnetic properties of soft magnetic materials. The use of such equipment is covered by ASTM Test Method A773/A773M. The Precision and Bias statement in Method A773/A773M was not established by an interlaboratory study. Consequently, an interlaboratory was initiated under the asupices of committee A06.
03/01/2000 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:F02-1015
An interlaboratory study was conducted by six laboratories which tested 6 materials to establish the precision statement of test method F2013.
03/01/2000 - PDF - Anglais -
En savoir plus56,70 € -
102,00 €
-
102,00 €
-
ASTM Research Report RR:D02-1473
The test development of the Sequence IVA has followed a logical process that has yielded a precise test capable of evaluating lubricants for valvetrain wear which has correlated to the camshaft wear of the ASTM Sequence VE.
16/12/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1470
An interlaboratory study was conducted to determine precision values for the D3230 test method.
14/12/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C08-1015
An interlaboratory study was conducted by a single laboratory testing a refractory mortar to establish a precision statement for test method C1445.
14/12/1999 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:G02-1011
An interlaboratory study was conducted by five laboratories testing three lubricated and unlubricated plastic web samples to establish a precision statement for test method G164.
02/12/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D27-1012
An interlaboratory study was conducted by thirty six laboratories testing six samples to establish a precision statement for test method D1533.
01/12/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1468
An interlaboratory study was conducted to establish the precision statement for the drivability index in test method D4814.
26/10/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1465
An interlaboratory study was conducted for test method D5453 to establish a precision statement for gasoline.
27/09/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E15-1057
An interlaboratory study was conducted by a single laboratory testing a 1-ton cylinder of liquid chlorine to establish a precision statement for test method E2037. The average concentration of bromine chloride by this method was 129 ppm. One analyst performed two to six analyses on each of seven days for a total of 24 determinations.
27/09/1999 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:D02-1466
An interlaboratory study was conducted for test method D381 to establish a precision statement that is applicable to modern gasoline',s which contain can contain oxygenated compounds and are required to contain deposit control additives.
27/09/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:E15-1058
An interlaboratory study was conducted by a single laboratory testing a one-ton cylinder of liquid chlorine containing approximately 0.2. ppm nitrogen trichloride to establish a precision statement for test method E2036.
27/09/1999 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1463
This report describes an interlaboratory study was carried out to establish a precision statement for test method D6468.
03/09/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1464
An interlaboratory study was conducted by ten laboratories and used three pure chemicals, one pure hydrocarbon, three fuels and three lubricating oils to establish a precision statement for test method D6450.
03/09/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1462
This report describes an interlaboratory study for test method D5800 to establish precision for Procedure C Selby-Noack Volatility Test.
03/09/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1460
This report describes an interlaboratory study for D6481 to establish precision for the determination of phosphorus, sulfur, calcium and zinc in lubricating oils by EDXRF.
13/08/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1459
An interlaboratory study was conducted for test method D5293 to establish precision with CCS-2B (manual) over the temperature range from -5 to -30 degree C and viscosity range from 1560 to 10,200 mPa(s).
13/08/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D04-1016
An interlaboratory study was conducted by ten laboratories testing three materials which ranged from approximately 92 to 99 % NaCl to establish a precision statement the rapid method for chemical analysis of sodium chloride found in standard specification D632.
29/07/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1457
An interlaboratory study was conducted to establish the reproducibility of ?O.N.-bar values for n = 5 in test method D2885.
28/07/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1456
This research report describes an interlaboratory study to establish precision for test method D5453 for UVF/X-ray equivalence.
23/07/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C09-1022
An interlaboratory study was performed by fifteen volunteer technicians to establish a precision statement for test method C143/C143M.
20/07/1999 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D04-1015
An interlaboratory study was conducted by six laboratories to establish a precision statement for the edge coverage test in the standard specification D3963/D3963M.
20/07/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F06-1005
An interlaboratory study was conducted by six laboratories testing seven samples to establish a precision statement for test method F970.
20/07/1999 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D01-1109
An interlaboratory study of the viscosity of a standard oil at one temperature and the melt viscosity of three resins each at 2 different temperatures was run by 10 laboratories for D6267.
09/07/1999 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:F11-1012
An interlaboratory study was conducted by eight laboratories which tested four materials to establish the precision statement of test method F558.
06/07/1999 - PDF - Anglais -
En savoir plus89,25 € -
NACE 10D199-1999
Coatings for the Repair and Rehabilitation of the External Coatings of Buried Steel Pipelines
01/07/1999 - PDF - Anglais -
En savoir plus192,00 € -
ASTM Research Report RR:D01-1112
An interlaboratory study of the Mettler cup and ball softening point of three hydrocarbon resins was conducted in 1998, in accordance with Practice E 691, by 10 laboratories.
09/06/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1113
An interlaboratory study of the ring and ball-softening point of rosin and three resins was run in by 9 laboratories for E28.
09/06/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D04-1014
A journal entry on an interlaboratory study that was conducted by twelve laboratories testing an asphalt mixture to establish a precision statement for test method D5581.
09/06/1999 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1451
Research report D02-1451 describes an interlaboratory study for test method D6417 to establish precision for results between 1.8 and 19.8 % of volatility at 371 degree C.
04/06/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1454
This report describes an interlaboratory study to establish precision for test method D6425.
04/06/1999 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1455
This report describes an interlaboratory study that shows how suspended water in hazy samples in Groups 1 and 2 can be removed by the addition of anhydrous sodium sulfate and separating the liquid sample from the drying agent by decanting without statistically affecting the results of the test for test method D86.
26/05/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D13-1103
An interlaboratory study was conducted by six laboratories testing three materials to establish a precision statement for test method D5344.
11/05/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1111
An interlaboratory study was conducted by seven laboratories testing nine materials to establish a precision statement for test method D6387.
16/04/1999 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D13-1102
An intralaboratory study was conducted by a laboratory testing seven flame resistant woven fabrics to establish a precision statement for test method D6413.
16/04/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D16-1026
An interlaboratory study performed by seven laboratories which tested four materials to establish the precision statement of test method D5776.
16/04/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D30-1001
An interlaboratory study was conducted by nine laboratories testing three materials to establish a precision statement for test method D5528.
14/04/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D04-1013
An Inter-Laboratory Study was conducted to establish precision statements for ASTM D6390, Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures.
04/04/1999 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F02-1012
An interlaboratory study was conducted by two laboratories testing four materials to establish a precision statement for test method F1927.
24/03/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1452
An interlaboratory study was conducted for test method D6371, a re-analysis of data collected in a 1988 interlaboratory study to present a precision statement for the practice of testing diesel fuels and heating oils for cold filter plugging point.
03/03/1999 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D13-1101
An interlaboratory study was conducted by four laboratories testing five materials to establish a precision statement for test method D5736.
03/03/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1450
The precision of the test method D6443 was determined by statistical analysis of an interlaboratory study. In this study, nine laboratories analyzed eleven oils and three additives in duplicate.
03/03/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:F08-1005
An interlaboratory study was conducted by nine laboratories which tested six materials to establish the precision statement of test method F1647.
04/02/1999 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1448
An interlaboratory study to establish a precision and bias statement for the Gelation Index and the Gelation Index Temperature in test method D5133.
26/01/1999 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:F07-1005
An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method F1863.
25/01/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:E01-1027
An interlaboratory study was conducted by seven laboratories which tested twelve materials to establish the precision statement of test method E1999.
25/01/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:C14-1001
An interlaboratory study on a study of the precision of ASTM C-429. Fifteen laboratories performed dry sieve analysis on six commonly used glass melting sands.
22/01/1999 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1446
An interlaboratory study was conducted by eleven laboratories testing ten samples to establish a precision statement for test method D6379.
19/01/1999 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1089
An interlaboratory study was conducted by thirteen laboratories testing three materials containing 35% carbon black to establish a precision statement for test method D6370.
19/01/1999 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1447
An interlaboratory study was conducted by twelve laboratories testing four oil samples and four fully formulated lubricant samples to establish a precision statement for test method D6375.
19/01/1999 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C09-1018
Ten laboratories participated in an interlaboratory study to evaluate the precision of the test method C1399.
19/01/1999 - PDF - Anglais -
En savoir plus63,00 € -
102,00 €
-
ASTM Research Report RR:D02-1444
An interlaboratory study was conducted by laboratories analyzing thirteen sample sets to establish a precision statement for test method D2500. The sample sets were comprised of various distillate fuels and lubricating oils with temperature range from -1 to -37�,C.
30/12/1998 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D16-1025
An interlaboratory study was conducted by fourteen laboratories testing five samples to establish a precision statement for test method D6563.
30/12/1998 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D05-1023
An interlaboratory study was conducted by eight laboratories testing ten carbon samples to establish a precision statement for test method D6316.
24/11/1998 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1443
An interlaboratory study for test method D5968 to establish precision for oil temperatures in diesel engines at 135 degrees C.
24/11/1998 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D20-1203
An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D2843.
13/10/1998 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D35-1005
An interlaboratory study was conducted by ten laboratories which tested two materials to establish the precision statement of test method D5993.
13/10/1998 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D16-1024
An interlaboratory study performed by fourteen laboratories which tested six materials to establish the precision statement of test method D6069.
03/10/1998 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:E01-1023
An interlaboratory study was conducted by eight laboratories which tested 10 materials to establish the precision statement of test method E1915.
28/09/1998 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:F08-1004
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method F1720.
28/09/1998 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1436
This research report describes an interlaboratory study for test method D6304 to establish the precision of determination of water in liquid petroleum products using coulometric Karl Fischer titration procedure.
11/09/1998 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1202
An interlaboratory study was conducted by fifteen laboratories testing four materials to establish a precision statement for test method D648.
11/09/1998 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:E15-1053
An interlaboratory study was conducted by seven laboratories testing one sample of chlorothiophene to establish a precision statement for test method E256.
11/09/1998 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D11-1087
An interlaboratory study was conducted by seven laboratories to establish a precision statement for test method D3484.
01/09/1998 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1431
An interlaboratory study using each of the procedures (filter instruments, FTIR instruments with PLS calibration, and FTIR instruments with CLS calibration) for test method D6277 was conducted to establish a precision statement.
24/08/1998 - PDF - Anglais -
En savoir plus102,90 €
