Rapport
-
ASTM Research Report RR:D20-1198
An interlaboratory study was conducted by thirteen laboratories testing three materials to establish a precision statement for the standard specification D1056.
01/05/1997 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1008
An interlaboratory study was conducted by six laboratories, testing three coatings to establish a precision statement for Test Method D3359 Procedures A &, B.
29/04/1997 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D10-1010
An interlaboratory study was conducted by nine laboratories testing 90 samples, ten of each nine strap materials to establish a precision statement for specification D3950.
26/04/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1083
An interlaboratory study was conducted by six laboratories testing two materials to establish a precision statement for test methods D5044 and D5051.
24/04/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1409
An interlaboratory study was conducted by fifteen laboratories testing eight samples to establish a precision statement for test method D2272.
22/04/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D10-1009
An interlaboratory study was conducted by ten laboratories testing three materials to establish a precision statement for specification D3953.
22/04/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D19-1157
An interlaboratory study was conducted by thirteen laboratories tested 21-32 sample spike solutions to establish a precision statement for test method D5673.
15/04/1997 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D19-1156
An interlaboratory study was conducted by seven laboratories testing four carbon samples to establish a precision statement for test method D5904.
01/04/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D30-1003
Four laboratories participated in the ruggedness testing portion of this investigation. The ASTM D 3039 Tensile Test method was used to test four composite materials including a glass/epoxy uni-tape, carbon/toughened epoxy uni-tape, aramid/epoxy fabric and a glass/epoxy uni-tape which is believed to be strain rate sensitive. These materials were tested at a variety of different lay-ups and specimen configurations to accomplish the stated objectives. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens tested by their facility. The interlaboratory study portion of this investigation was conducted using the ASTM D3039 Tensile Test method on six composite materials in a variety of lay-up configurations. The materials tested included: IM-6/3501-6 uni-tape, glass/epoxy uni-tape, carbon/toughened epoxy fabric, Toray carbon/epoxy uni-tape, Toho carbon/epoxy uni-tape and glass/polypropylene unitape. An average of five replicates per test condition were tested by the participating laboratories. The number of participating test laboratories ranged from five to nine depending on the material type. Laboratories were requested to provide failure strength, failure strain, chord modulus and failure mode for each of the specimens tested at their facility. Laboratories were requested to provide failure strength, failure strain and chord modulus data for each of the specimens test by their facility.
01/04/1997 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:E37-1018
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method E1858.
26/03/1997 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:E37-1019
An interlaboratory study was conducted by nine laboratories comparing the thermal analyzer clock to a traceable secondary reference time piece of accuracy to establish a precision statement for test method E1860.
26/03/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1195
An interlaboratory study was conducted by ten laboratories testing two samples to establish a precision statement for test method D6099.
25/03/1997 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1408
An interlaboratory study was conducted by seven laboratories testing ten samples to establish a precision statement for specification D4171.
25/03/1997 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D16-1020
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test methods D2360 and D5917.
12/03/1997 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C09-1012
An interlaboratory study was conducted by eleven laboratories testing four concrete samples to establish a precision statement for test method C1084.
05/03/1997 - PDF - Anglais -
En savoir plus63,00 € -
NACE 7K189-1997
Control Factors in Performance Testing of Nonchemical Water Treatment Devices
01/03/1997 - PDF - Anglais -
En savoir plus192,00 € -
NACE 7G181-1997
Investigation of the Effects of Corrosion-Inhibiting Treatments on Mechanical Seals in Recirculating Hot Water Systems
01/03/1997 - PDF - Anglais -
En savoir plus192,00 € -
ASTM Research Report RR:D19-1155
An interlaboratory study was conducted by sixteen analysts in nine laboratories testing five samples to establish a precision statement for test method D5916.
09/02/1997 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D05-1020
An interlaboratory study was conducted by twelve laboratories testing twelve coal samples to establish a precision statement for test methods D5865, D3173, D3174 and D4239.
05/02/1997 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D06-1003
An interlaboratory study was conducted in June/July 1996 by twenty laboratories testing six grades of materials to establish a precision statement for D5725.
05/02/1997 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1406
An interlaboratory study was conducted by 27 laboratories testing nine samples to establish a precision statement for test method D2887.
24/01/1997 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D11-1082
An interlaboratory study was conducted by six laboratories testing six polymer grade samples to establish a precision statement for test method D6049.
14/01/1997 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D15-1019
An interlaboratory study was conducted by twelve laboratories testing six samples to establish a precision statement for test method D5828.
08/01/1997 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1404
An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D4684.
06/01/1997 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D05-1035
An interlaboratory study was conducted by fourteen laboratories which tested fifteen materials to establish the precision and bias statement of test method D6349.
01/01/1997 - PDF - Anglais -
En savoir plus81,90 € -
102,00 € -
ASTM Research Report RR:E28-1016
An interlaboratory study was conducted by eight laboratories testing two steel materials to establish a precision statement for test method E517.
27/12/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D19-1160
An interlaboratory study was conducted by seventeen laboratories testing six samples to establish a precision statement for test method D6071.
27/12/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E01-1018
An interlaboratory study was conducted by seventeen laboratories testing seven samples to establish a precision statement for test method E1852.
17/12/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1019
An interlaboratory study was conducted by testing the procedure of analysis of Nickel Alloys by flame atomic absorption spectrometry for a series of 8 elements to establish a precision statement for test method E1835.
09/12/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1017
An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method E1834.
09/12/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E37-1017
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method E1582.
08/11/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1403
An interlaboratory study was conducted by eleven laboratories testing five samples to establish a precision statement for test method D5763.
04/11/1996 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:E01-1020
An interlaboratory study was conducted by thirty-one laboratories testing eight samples to establish a precision statement for test method E1898.
04/11/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C28-1002
An interlaboratory study was conducted by seventeen laboratories to develop precision statements for ASTM test method C1322.
24/09/1996 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:C28-1003
An interlaboratory study was conducted by eleven laboratories testing samples of steel, Tungsten Carbide, and Silicon Nitride to establish a precision statement for test method C1326.
24/09/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C28-1001
An interlaboratory study was conducted by three individuals testing three machines to establish a precision statement for test method C1161.
24/09/1996 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:F01-1013
An interlaboratory study was conducted by eight laboratories testing three materials to establish a precision statement for test method F1593.
29/08/1996 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D24-1031
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for test method D3192.
26/08/1996 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D24-1030
An interlaboratory study was conducted by eight laboratories testing four materials to establish a precision statement for test method D3191.
26/08/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C28-1000
An interlaboratory study was conducted by eight laboratories testing four advanced ceramic samples to establish a precision statement for test method C1259.
19/08/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1101
An interlaboratory study was conducted by nine laboratories testing three samples to establish a precision and bias statement for test method D5974.
15/08/1996 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D20-1190
An interlaboratory study was conducted by seven laboratories testing a polyisocyanurate and a polystyrene sample to establish a precision statement for test method D2842.
09/08/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D19-1174
An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method D6239.
12/07/1996 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:F07-1002
An interlaboratory study was conducted by three laboratories testing for windscreen positioning and angular deviation to establish a precision statement for test method F801.
02/07/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:G04-1001
An interlaboratory study was conducted by six laboratories testing three cleaning materials to establish a precision statement for test method G122.
01/07/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1102
An interlaboratory study was conducted by seventeen laboratories testing three samples to establish a precision and bias statement for test method D1065.
21/06/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F08-1003
An interlaboratory study was conducted by six laboratories testing six samples to establish a precision statement for test method F1702.
12/06/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:G02-1008
An interlaboratory study was conducted by forty laboratories testing samples to establish a precision statement for steel versus steel ball wear scar diameter results and steel versus steel ball friction results in test method G99.
04/06/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1391
There are two laboratory tests available for the determination of High Temperature Deposits. The tests are the Thermo-Oxidation Engine Oil Simulation Test (TEOST) and the Hot Tube Test (HTT). This report describes three interlaboratory studies that were conducted to determine the precision of the methods. The first study is a preliminary (first) round robin held in February 1995, on the TEOST. Three reference oils were analyzed by seven participating laboratories. The second study is a full (second) round robin on the TEOST held in June 1995. Nine laboratories participated by analyzing seven reference oils. The third study in this report is a round robin on the HTT. The same seven reference oils used in the second TEOST round robin were analyzed by ten participating laboratories.
03/06/1996 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D02-1388
An interlaboratory study was conducted by sixteen laboratories testing thirteen samples to establish a precision statement for test method D5186.
30/05/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D34-1011
An interlaboratory study was conducted by eight participants testing a sand and an organic soil spiked with various concentrations of diesel fuel to establish a precision statement for test method D5831.
21/05/1996 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D02-1387
An interlaboratory study was conducted by thirteen laboratories testing four hydrocarbon samples to establish a precision statement for test method D4052.
20/05/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E15-1048
An interlaboratory study was conducted by eight laboratories testing a single sample of acrylonitrile to establish a precision statement for test method E1784.
15/05/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E15-1049
An interlaboratory study was conducted by seven laboratories testing two samples of acrylonitrile to establish a precision statement for test method E1788.
15/05/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D05-1019
An Interlaboratory Study was conducted to establish precision statements for ASTM D5515, Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer.
09/05/1996 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D20-1188
An interlaboratory study was conducted by seven laboratories testing polyamide 66 material to establish a precision statement for test method D3801.
07/05/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D35-1003
An interlaboratory study was conducted by nine laboratories testing four samples to establish a precision statement for test method D5885.
17/04/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E15-1045
An interlaboratory study was conducted by a single laboratory testing three streams of liquid chlorine to establish a precision statement for test method E1786.
12/04/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D28-1005
An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D2854.
08/04/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E15-1044
An interlaboratory study was conducted by nine laboratories testing one sample of di-tert-butyl-peroxide to establish the precision statement for test method E475.
22/03/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1385
An interlaboratory study was conducted by thirty-five laboratories testing fourteen samples to establish a precision statement for test methods D5091, D4305, and D5972.
20/03/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:F06-1003
An interlaboratory study was conducted by six laboratories testing three categories of unprinted resilient sheet flooring which contained low, medium and high levels of stabilizers to establish precision statements for test methods F1515 and F1514.
18/03/1996 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1384
An interlaboratory study was conducted by five laboratories testing nine fuel samples to establish a precision statement for test method D5452.
08/03/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1405
An interlaboratory study was conducted by a single laboratory testing a single sample containing a nominal sulfur concentration of 0.2 ppm to establish a precision statement for test method D4045.
29/02/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1382
An interlaboratory study was conducted by six laboratories testing samples to establish a precision statement for test method D5769.
16/02/1996 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D20-1192
An interlaboratory study was conducted by ten laboratories testing nine samples to establish a precision statement for test method D5017. An earlier round robin, conducted by ten laboratories testing six samples is also included in this report.
13/02/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1078
This report describes an interlaboratory study to establish precision statements for ASTM D5902. A test program was completed to measure the residual unsaturation in HNBR by iodine number and infrared spectrophotometry. This report deals with the iodine number approach only. Seven laboratories tested three different HNBR samples with unsaturation levels of <1%, approximately 2% and approximately 5% were used. The iodine results were measured in duplicate on two difference days.
07/02/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1080
An interlaboratory study was conducted to establish precision statements for ASTM D3403, Standard Test Methods for Rubber- Evaluation of IR (Isoprene Rubber).
05/02/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1379
An interlaboratory study was conducted by one laboratory testing oil samples to establish a precision statement for test method D4485.
29/01/1996 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1103
An interlaboratory study was conducted by seven laboratories testing two samples to establish a precision statement for test method D6038.
22/01/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1053
An interlaboratory study was conducted by four laboratories testing three samples to establish a precision statement for test method C1501.
18/01/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1097
An interlaboratory study was conducted by five laboratories testing three ink samples to establish a precision and bias statement for test method D5909.
11/01/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1096
An interlaboratory study was conducted by five laboratories testing five samples to establish a precision statement for test method D4017.
11/01/1996 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F23-1002
An interlaboratory study was conducted by six laboratories testing nine samples to establish a precision statement for test method F1670 and F1671.
09/01/1996 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1378
An interlaboratory study was conducted by eight laboratories testing thirteen oil samples to establish a precision statement for test method D5481, D4683, and D4741.
05/01/1996 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D04-1012
An interlaboratory study was conducted by twelve laboratories testing samples of aggregate and asphalt cement to establish a precision statement for test method D5581.
01/01/1996 - PDF - Anglais -
En savoir plus56,70 € -
102,00 €
-
ASTM Research Report RR:D02-1375
An interlaboratory study was conducted by five laboratories testing seventeen samples to establish a precision statement for test method D1840.
18/12/1995 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:E15-1043
A round robin was conducted by fourteen laboratories testing two samples to establish precision
13/12/1995 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1374
An interlaboratory study was conducted by eleven laboratories testing thirty-six samples to establish a precision statement for test method D5845.
11/12/1995 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D02-1373
An interlaboratory study was conducted by twenty-nine laboratories testing ten samples on various machines to establish a precision statement for test methods D5771, D5772, and D5773.
13/11/1995 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1370
An interlaboratory study was conducted by eleven laboratories testing fifteen samples to establish a precision statement for test method D5762.
30/10/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E15-1046
Interlaboratory Study to Establish Precision Statements for ASTM E224, Tests for Analysis of Hydrochloric Acid
13/10/1995 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1371
An interlaboratory study was conducted by eleven laboratories testing nine samples to establish a precision statement for test method D5853.
06/10/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1368
An interlaboratory study was conducted by ten laboratories testing eight samples to establish a precision statement for test method D5384.
21/09/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C08-1012
Interlaboratory Study to Establish Precision Statements for ASTM C831, Tests for Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
19/09/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D01-1085
Interlaboratory Study to Establish Precision Statements for ASTM D5910, Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
09/09/1995 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:S15-1010
An interlaboratory study was conducted by nineteen laboratories testing four samples to establish precision statements for test methods D92, D93, D56 and D3828.
14/08/1995 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1358
An interlaboratory study was conducted by eleven laboratories testing eight samples to establish a precision statement for test method D5705.
09/05/1995 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D04-1008
Data from the AASHTO Materials Reference Laboratory (AMRL) proficiency sample data base was analyzed to develop better estimates of test precision for three tests on asphalt recovered from solution by Abson Method: Penetration at 25�,C (77�,F), Kinematic Viscosity at 135�,C (275�, F), and Viscosity at 60�,C (140�,F). This information will serve users of ASTM D1856, Standard Test Method for Recovery of Asphalt from Solution by Abson Method.
26/04/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D04-1007
An Interlaboratory Study was conducted to establish precision statements for ASTM D1188, Test for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Paraffin-Coated Specimens.
26/04/1995 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1352
An interlaboratory study was conducted by five laboratories testing six samples to establish a precision statement for test method D5183.
28/03/1995 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D01-1090
Interlaboratory Study to Establish Precision Statements for ASTM D3257, Test for Aromatics in Mineral Spirits by Gas Chromatography
01/03/1995 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C16-1019
An interlaboratory study was conducted by eight labotories testing two samples to establish precision statements for ASTM C335.
15/02/1995 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E05-0001
An interlaboratory study was conducted by eleven laboratories testing six test materials to establish a precision statement fro test method E84.
01/11/1994 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1337
An interlaboratory study was conducted by eight laboratories testing eight samples to establish a precision statement for test method D5621.
09/09/1994 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C01-1004
An interlaboratory study was conducted by thirteen laboratories testing twelve cement samples to establish a precision statement for test method C452.
25/08/1994 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1333
An interlaboratory study was conducted by fourteen laboratories testing eight samples to establish a precision statement for test method D445.
11/08/1994 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1331
An interlaboratory study was conducted by twenty-one laboratories testing six samples to establish a precision statement for test method D445.
11/08/1994 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1334
An interlaboratory study was conducted by twenty-five laboratories testing five samples to establish a precision statement for test method D445.
11/08/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1332
An interlaboratory study was conducted by nineteen laboratories testing fourteen samples to establish a precision statement for test method D445.
11/08/1994 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:C09-1008
The purpose of this research report is to report the results of an interlaboratory study (ILS) conducted in 1987-89. During the ILS, seven laboratories tested four samples to establish a precision statement for ASTM C311.
06/06/1994 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C01-1003
An interlaboratory study was conducted by ten laboratories testing five cement samples to establish a precision statement for test method C1012.
17/05/1994 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:C24-1044
Interlaboratory Study to Establish Precision Statements for ASTM C1241, Test for Volume Shrinkage of Latex Sealants During Cure
06/04/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C24-1045
An interlaboratory study was conducted by four laboratories, testing four sealants to establish a precision statement for Test Method C1246.
06/04/1994 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1043
An interlaboratory study was conducted by four laboratories, testing four sealants for 6 &, 10 weeks of water immersion on aluminum and concrete substrates to establish a precision statement for Test Method C1247.
05/04/1994 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1038
Interlaboratory Study to Establish Precision Statements for ASTM C1253, Test for Determining the Outgassing Potential of Sealant Backing
18/03/1994 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C24-1037
Interlaboratory Study to Establish Precision Statements for ASTM C1016, Test for Determination of Water Absorption by Sealant Backup (Joint-Filler) Material
18/03/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1325
An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test methods D2156 and DD2157.
09/03/1994 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C24-1039
Interlaboratory Study to Establish Precision Statements for ASTM D2202, Test for Slump of Sealants
02/03/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1266
An interlaboratory study was conducted by eight laboratories testing eleven samples to establish a precision statement for test method D5501.
24/02/1994 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:C26-1005
Interlaboratory Study to Establish Precision Statements for ASTM C1108, Test for Plutonium by Controlled-Potential Coulometry
17/02/1994 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D11-1069
An interlaboratory study was conducted by nine laboratories testing six oils to replace ASTM #2 and #3 oils in test method D471.
17/02/1994 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D11-1068
An interlaboratory study was run to establish the precision of the D3188-91 test methods. Samples of various IIR were sent to various laboratories for mixing and testing.
04/02/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D04-1009
An Interlaboratory Study was conducted to establish precision statements for ASTM D3042, Test for Insoluble Residue in Carbonate Aggregates.
26/01/1994 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:E01-1010
Interlaboratory Study to Establish Precision Statements for ASTM E1335, Test for Determination of Gold in Bullion by Cupellation (Method A)
14/01/1994 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E01-1011
Interlaboratory Study to Establish Precision Statements for ASTM E1335, Test for Determination of Gold in Bullion by Cupellation (Method B)
14/01/1994 - PDF - Anglais -
En savoir plus56,70 € -
102,00 €
-
102,00 €
-
102,00 €
-
102,00 €
-
102,00 €
-
ASTM Research Report RR:D02-1316
An interlaboratory study was conducted by five laboratories testing seven samples to establish a precision statement for test method D5442. The seven samples chosen for the round robin included waxes which were primarily paraffin, mixtures of paraffin and microcrystaline and one sample containing oil.
28/12/1993 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D34-1009
Interlaboratory Study to Establish Precision Statements for ASTM D5530, Test for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
28/12/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1008
Interlaboratory Study to Establish Precision Statements for ASTM E1569, Test for Determination of Oxygen 11 in Tantalum Powder
16/12/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E01-1007
Interlaboratory Study to Establish Precision Statements for ASTM E1568, Test for the Determination of Gold in Activated Carbon by Fire Assay Gravimetry
27/10/1993 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D11-1066
An interlaboratory study was run to establish the precision of the D3194-84 test method. Samples of various rubbers were sent to various laboratories for testing.
20/10/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D11-1065
An interlaboratory study was conducted to establish precision statements for ASTM D3900, Tests for Rubber. Raw- Determination of Ethylene units in EPM (Ethylene-Propylene Gopolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers).
10/08/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1180
An interlaboratory study was conducted by laboratories testing eight samples which were composed of two different base materials to establish a precision statement for test method D1003.
04/08/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1082
Interlaboratory Study to Establish Precision Statements for ASTM D5401, Test for Evaluating Clear Water Repellent Coatings on Wood
15/07/1993 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D10-1007
Standard Test Method D2658-91 describes the use of a box gage caliper set for measuring inside dimensions of fiberboard boxes. The inter-laboratory test study was set up to determine the precision of test measurements (repeatability within a laboratory and reproducibility between laboratories) by measuring fiberboard boxes at ten laboratories.
01/07/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1307
An interlaboratory study was conducted by laboratories which tested samples of fuel to establish the precision and bias statement for test method D5453.
22/06/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C16-1016
An interlaboratory comparison was undertaken by the ASTM Task Group responsible for C167, Standard Test Methods for Thickness and Density of Blanket or Baty Insulations. The purpose of this study was two-fold: determination of the most appropriate batt selection method and the development of a Precision and Bias statement. A pilot study revealed the need to revise the current batt selection technique for assessing the average recovered thickness for a package. This technique was shown to be a consistent underpredictor of package thickness, due to an overemphasis on pieces close to the outside edges of a package. The effect of end-compression was cited in the study as one which plays a significant role in the accuracy of a selection method. While the current ASTM selection method overaccounts for this phenomena by selecting the two end pieces as part of the 5-batt test sample, the previous study also showed that it is also possible to underaccount for end-compression and over-predict the average package thickness.
10/06/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:S15-1008
An interlaboratory study was conducted by twenty-five laboratories testing seven samples to establish precision statements for test methods D92 and D93.
27/05/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:S15-1009
An interlaboratory study was conducted by eleven laboratories testing seven oil samples to establish a precision statement for test method D92.
27/05/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C16-1015
Three different types of insulation and two prepared extracts were submitted to ten different laboratories for test, along with detailed instructions for the extraction part of the procedure. Laboratories were instructed to use the approved procedures but encouraged to submit additional data from proposed alternate procedures. The results of this interlaboratory study program are listed within this research report, establishing precision statements for C871.
25/05/1993 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D05-1015
An Interlaboratory Study was conducted to establish precision statements for ASTM D3302, Standard Test Method for Total Moisture in Coal, D3174, Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal, D2015, Standard Test Method for Gross Calorific Value of Coal and Coke by the Adiabatic Bomb Calorimeter, and D4239, Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High- Temperature Tube Furnace Combustion.
25/05/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1177
An interlaboratory study was conducted by nine laboratories testing seven film materials to establish a precision statement for test methods D1922, D1004, and D1938.
23/05/1993 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:C09-1006
An interlaboratory study was conducted to establish precision statements for C39/C39M-05. Laboratories tested individual 6 by 12 in cylinders made from a well mixed sample of concrete.
10/05/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1081
Interlaboratory Study to Establish Precision Statements for ASTM D5399, Test for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography
04/05/1993 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C09-1005
Ten laboratories tested four air entraining admixtures for specific gravity to establish a precision statement for C233. All labs, except one, submitted data in triplicate. Two labs used a pycnometer and eight labs used a hydrometer for determinations.
29/03/1993 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D08-1008
The purpose of this study was to redetermine the precision of the ASTM Standard Test Methods for Quinoline-Insoluble (QI) and Toluene-Insoluble (TI) contents of Tar and Pitch (D2318 bad D4072). The ISO counterparts of these tests were included in the round robin.
10/03/1993 - PDF - Anglais -
En savoir plus115,50 € -
102,00 €
-
ASTM Research Report RR:D01-1079
Interlaboratory Study to Establish Precision Statements for ASTM D5326, Test for Color Development in Tinted Latex Paints
25/11/1992 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D09-1033
This research report covers the work performed to estimate the precision of Test Method D3145-88 for thermal endurance of electrical insulating varnish by the helical coil method.
04/11/1992 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C08-1010
Interlaboratory Study to Establish Precision Statements for ASTM C1099, Test for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
21/10/1992 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D09-1032
This interlaboratory study was undertaken to establish the data necessary to generate a precision and bias statement for the Strip Force of hookup wire insulation per ASTM D3032, Standard Test Methods for Hookup Wire Insulation.
08/10/1992 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D26-1013
Interlaboratory Study to Establish Precision Statements for ASTM2108, Test for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
23/09/1992 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D26-1012
Interlaboratory Study to Establish Precision Statements for ASTM D2106, Test for Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
23/09/1992 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1296
An interlaboratory study was conducted by eighteen laboratories testing ten samples to establish a precision statement for test method D4815.
23/09/1992 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:E28-1015
An interlaboratory testing program was organized by the Metals Property Council to determine the precision for E21, Standard Practice for Elevated Temperature Tension Testing of Materials. The details of the test program are given in Appendix I. Basically, four alloys were selected that would give a wide range of properties at elevated temperature. The materials were a low carbon steel, a 2-1/4 Cr - 1 Mo ferritic alloy, Type 304 stainless steel, and A-286, a precipitation hardening high temperature alloy. The tension tests were run at 600�,F and 1100�,F with three replicate specimens. For each test the 0.2% offset yield strength, ultimate tensile strength, percent elongation, and percent reduction of area were measured. This report presents the results of this study and the statistical analysis made according to ASTM E691, Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods. Based on the statistical analysis, a precision statement was written for the test method described in ASTM E21. The proposed precision statement is attached as Appendix II.
11/09/1992 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:E01-1004
Interlaboratory Study to Establish Precision Statements for ASTM E1447, Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity Method
16/07/1992 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1286
An interlaboratory study was conducted by a total of 60 laboratories testing fourteen different foul types to establish a precision statement for test methods D4953, D5190, and D5191.
14/05/1992 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D24-1023
Interlaboratory Study to Establish Precision Statements for ASTM D1512, Test for Carbon Black pH Value
23/04/1992 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1285
An interlaboratory study was conducted by fifteen laboratories testing ten calibration oils and nineteen round robin oils to establish a precision statement for test method D5293.
05/03/1992 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:B09-1016
An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method B294.
01/01/1992 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:E28-1014
An interlaboratory study was conducted by twenty-nine laboratories testing low energy and high energy CVN samples to establish a precision statement for test method E23.
12/12/1991 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1052
Interlaboratory Study to Establish Precision Statements for ASTM D4828, Test for Practical Washability of Organic Finishes
12/12/1991 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1284
An interlaboratory study was conducted by thirteen laboratories testing a reference oil sample to establish a precision statement for test method D665.
20/11/1991 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1283
An interlaboratory study was conducted by five laboratories testing five samples to establish a precision statement for test method D5059.
14/11/1991 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1282
An interlaboratory study was conducted by twelve laboratories testing twelve samples to establish a precision statement for test method D5185.
09/10/1991 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1278
An interlaboratory study was conducted by one laboratory testing petroleum products to establish a bias statement for test method D0129.
05/09/1991 - PDF - Anglais -
En savoir plus50,40 € -
ASTM Research Report RR:D02-1277
An interlaboratory study was conducted by seven laboratories testing six oil samples to establish a precision statement for test method D4684.
27/08/1991 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D20-1170
An interlaboratory study was conducted by eleven laboratories testing eight samples of pellets to establish a precision statement for test method D638.
20/08/1991 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1274
An interlaboratory study was conducted by ten laboratories testing three Type-A fuel series and two Type-B fuel series to establish a precision statement for test method D3948.
30/07/1991 - PDF - Anglais -
En savoir plus102,90 € -
ASTM Research Report RR:D26-1011
Interlaboratory Study to Establish Precision Statements for ASTM D3444, Test for Total Acid Number of Trichlorotrifluoroethane
29/04/1991 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D02-1268
An interlaboratory study was conducted by twelve operators testing three samples to establish a precision statement for test method D4860.
12/02/1991 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1265
An interlaboratory study was conducted by ten laboratories testing nine samples to establish a precision statement for test method D5134.
22/01/1991 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D02-1264
An interlaboratory study was conducted by six laboratories testing ten samples to establish a precision statement for test method D2603.
17/01/1991 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:E33-1007
Interlaboratory Study to Establish Precision Statements for ASTM E1289, Standard Specification for Reference Specimen for Sound Transmission Loss
13/12/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C17-1003
An interlaboratory study was conducted by one laboratory on products with mean values of loose density of 160 and 1600 kg/m3, to establish a repeatability statement for C1162.
07/11/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:F02-1008
An interlaboratory study was conducted by seven laboratories testing three materials to establish a precision statement for test method F904.
31/10/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D01-1067
Precision, Degradation Rates, and Correlations Obtained for Coated Panels Exposed by Procedures Given in Practive D4141 - Report 2
19/09/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D01-1066
A round-robin was conducted to determine the precision, degradation rates, and correlations produced by the exposure of coil coatings and automotive coaings using procedures given in ASTM D4141.
19/09/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E15-1040
This study involves two methods for determination of chloride in 50% NaOH. The purpose of the study was to evaluate these two methods as more modern and objective approaches compared to the classical method existing in E-291 of Volume 15.05. These two electroanalytical procedures to be investigated involved potentiometric titration with silver nitrate and ion selective electrod potentiometry, respectively. It was anticipated that these procedures would allow determination of chloride in 50% NaOH (and KOH), at much lower levels of chloride as exist in Mercury Cell NaOH, for example. Another anticipated advantage was that the existing classical titration already on the books would be replaced with the new methods which involve no subjective judgement regarding a visual end point determination. Finally, it was hoped that cost of apparatus and instrumentation would not be prohibitive for implementing the two new procedures.
17/05/1990 - PDF - Anglais -
En savoir plus115,50 € -
ASTM Research Report RR:D27-1005
Interlaboratory Study to Establish Precision Statements for ASTM D4059, Method for Analysis of Polychlorinated Biphenyls in Mineral Insulating Liquids by Gas Chromatography
16/04/1990 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:C17-1002
An interlaboratory study was conducted by one laboratory on products with mean values of kerosene retention of approximately 200 and 400 cm3/100g, to establish a repeatability statement for C1124.
21/03/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:C17-1001
An interlaboratory study was conducted by one laboratory on products with mean values of wet volume ranging from 0.03 to 1.7 dm3 (30 to 1700 cm3) to establish a repeatability statement for C1122.
21/03/1990 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D01-1063
Interlaboratory Study to Establish Precision Statements for ASTM D5007, Test for Wet-to-Dry Hiding Change
28/02/1990 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:E05-1008
An interlaboratory study was conducted by six laboratories testing six samples to derive a suitable statement of the repeatability and reproducibility achievable by the method ASTM E1354.
25/01/1990 - PDF - Anglais -
En savoir plus95,55 € -
ASTM Research Report RR:D11-1058
Research Report D11-1058 contains supporting data for ASTM D575, Test Methods for Rubber Properties in Compression.
09/01/1990 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D08-1005
Research Report D08-1005 contains supporting data for ASTM D146, Methods of Sampling and Testing Bitumen- Saturated Felts and Fabrics Used in Roofing and Waterproofing.
06/12/1989 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D09-1028
This interlaboratory study was undertaken to establish the data necessary to generate a Precision Statement for the Heat Resistance and Copper Stability Test Methods in Test Methods D2671, Standard Methods of Test Heat Shrinkable Tubing for Electrical Use.
15/11/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:E28-1009
An Overview of ASTM E74 Load Cell Calibration With Respect to Degree of Polynomial Fit
16/08/1989 - PDF - Anglais -
En savoir plus56,70 € -
ASTM Research Report RR:D09-1026
An interlaboratory study was conducted by four laboratories testing eight samples to establish a precision and bias statement for test method D149.
03/05/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1249
An interlaboratory study was conducted by eleven laboratories testing nine samples to establish a precision statement for test method D4684.
12/04/1989 - PDF - Anglais -
En savoir plus89,25 € -
ASTM Research Report RR:D02-1245
The precision data for D4953 contained 15 samples, 7 were hydrocarbon only and 8 were fuels containing hydrocarbon-oxygenate blends with a range of oxygen content from 2 to 6% and a vapor pressure range from 41 to 97 kPa (6 to 14 psi). The vapor pressure of these samples was determined by Procedures A and B. A total of 31 laboratories participated in the program, 18 performed Procedure A and 13 Procedure B. Vapor pressure of the hydrocarbon only samples and two samples containing methyl t-butyl ether was also determined by Method D 323.
09/03/1989 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D02-1244
An interlaboratory study was conducted by fourteen laboratories testing eight sample oils to establish a precision statement for Test Method D892.
22/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C09-1001
The purpose of this report is to report estimates of single-operator (i.e. within laboratory) precision and multilaboratory (i.e. between laboratory) precision, as defined in paragraphs 6.2 and 6.3 of ASTM C 802- 87, for the proposed pozzolanic-activity-with-cement test that has been under development in ASTM C09.03.10. Data were derived from the results of two interlaboratory studies. These studies are the last two in a series of five and were conducted with the method in its currently proposed form. The first three studies were developmental, consequently do not represent the currently proposed form and were not useful for precision estimates. Part 4 of the interlaboratory study was completed in 1987, Part 5 was completed in 1988. The data were analyzed according to ASTM C 802-87. The precision statement was prepared according to ASTM C 670-87. Part 4 of the interlaboratory study included three fly ashes: a Class C fly ash, a Class F fly ash, and an unclassified Class F fly ash. The latter material was known, from other experience, to perform poorly and was included to verify that the proposed method would be sensitive to such a material. Twelve laboratories participated in this study. Part 5 of the interlaboratory study included one Class C fly ash and one Class N pozzolan. Eight laboratories participated. Test ages were 7 and 28 days in both studies.
10/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D26-1005
An interlaboratory study was conducted by four laboratories testing five grades of virgin solvent samples to establish a precision statement for test method D2111.
09/02/1989 - PDF - Anglais -
En savoir plus63,00 € -
102,00 €
-
102,00 €
-
ASTM Research Report RR:D09-1024
This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statements for ASTM D350, Standard Methods of Testing Flexible Treated Sleeving Used for Electrical Insulation. This report covers only part of the full list of methods in this standard. Other methods are still under evaluation.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D20-1149
An interlaboratory study was conducted by eleven laboratories testing three samples, a polyethylene, an ABS and an acrylic, to establish a precision statement for test method D635.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D09-1025
This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statement for the Solvent Resistance test method in Methods D2671, Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use.
30/12/1988 - PDF - Anglais -
En savoir plus81,90 € -
ASTM Research Report RR:D08-1003
An Interlaboratory Study to establish precisions statements for ASTM D4892, Test Method for Density of Solid Pitch (Helium Pycnometer Method).
27/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:C16-1014
The purpose of this round robin was to develop a new precision and bias statement for E96. This round robin included both thin films and thick materials, representing both low and high perm values. The object of the research being described in this report was two-fold: (l) establish a precision and bias statement for the test method and (2) seek another standard reference material (SRM) to replace the 1 mil thick polyethylene terephthalate film previously used in Standard C 677 to obtain average exposure conditions surrounding test specimens being used in this test method.
21/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D24-1009
An interlaboratory study was conducted by four laboratories testing four samples to establish precision statements for ASTM D1937.
02/12/1988 - PDF - Anglais -
En savoir plus63,00 € -
ASTM Research Report RR:D02-1238
An interlaboratory study was conducted by 39 laboratories testing 23 samples to establish a precision statement for test method D4870.
01/12/1988 - PDF - Anglais -
En savoir plus81,90 €
