SME
-
SME CM99-270:1999
Monitoring Hardening Processes On Gear Components Using Eddy Current And The Preventive Multi-Frequency
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME FC99-199
Pvd & Cvd Coatings For Stamping And Forming Of Stainless Steels
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-288
Ir Imaging System As A Tool For Temperature Measurements Of Chips
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-143
Effects Of Cutting Fluid Type On The Dimensional Accuracy Of Tapped Threads
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-267
Improving The Performance Of Machine Tools With Ptfe (Teflon) Linear Bearing Materials
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-254
Micromagnetic In-Process Surface Integrity Analysis Of Ground Workpieces
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-180:1999
An Examination Of Cutting Fluid Mist Formation In Turning
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-129
A Comparison Between An Improved Upper Bound, A Modified Slab And Finite Element Methods For Flow Analysis In Shaped Extrusion Dies
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR99-242
Optimization Of Grinding Processes For Hard And Brittle Materials By Computer Supported Design Of Grinding Wheel Hubs Using The Finite Element Method
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-172
On-Line Tool Wear Compensation System In Milling Operation
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-186:1999
Internet-Based Real Time Remote Monitoring System For Machining Processes
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-165:1999
On-Line Expulsion Detection And Estimation For Resistance Spot Welding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-283
On The Effect Of Path Curves On Process And Wheel Wear In Grinding On Lapping Machines
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
SME MF99-150
A New Approach To Predicting Forming Limits Of Steel Sheet
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS99-188:1999
Least Square Curve And Surface Localization For Shape Conformance Checking
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-247
A Predictive Model For Workpiece Surface Error Due To Machining Processes
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF99-220
Bringing Out The Best Properties Of Nitrided Layers Through Controlled Gas Nitriding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-158:1999
Part Warpage Model Based On Machining-Induced Residual Stress
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME AD99-279
Adhesive And Sealant Dispensing Concepts And Approaches
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-139:1999
Intelligent Control For Drilling Of Carbon Fiber-Reinforced Laminates
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-167:1999
The Effect Of Tool Edge Geometry On Workpiece Sub-Surface Deformation And Through-Thickness Residual Stresses For Hard-Turning Of Aisi 52100 Steel
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-153
Improving Ironing Performance Using Dies Subjected To Ultrasonic Radial Vibration
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MR99-238
Innovative Approach Of Electrolytic In-Process Dressing For High-Speed Grinding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-190:1999
Real-Time Inspection Strategy For Dimensional Accuracy Of Sculptured Surfaces In Coordinate Measuring Machine
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF99-285
Application Of (Micro)-Edm In The Machining Of Micro Structured Forming Tools
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-277
Statistical Analysis Of Thermal Coating Process Capabilities
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME IQ99-206
The Use Of Optical Probes On Coordinate Measuring Machines - Strengths And Weaknesses
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-145
On The Manufacturing Complexity Of Die-Cast Components
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME FC99-256
Technology Convergence - Future Finishing Faces Fresh Challenges
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
19,00 €
-
SME MS99-176:1999
An Experimental Evaluation Of Coefficients Of Static Friction Of Aluminum Workpiece - Fixture Element Pairs
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME PE99-126
New Rapid Prototyping Technique Based On 3-D Welding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME EM99-223
Pasteurization As A Critical Control Point: The Role Of Iso 9000 With Your Haccp Plan
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-240
Surface Generation In The Case Of Honing With Superabrasives
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-255
Tool And Process Design For High-Efficient Machining
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-113:1999
Helical Grinding Procedure Of The Curved Cutting Edge Drills
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-138:1999
Using Multivariate Models To Monitor End-Mill Wear And Predict Tool Failure
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR99-136:1999
Depth Of Damage Induced In Ceramics By The Grinding Process
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-236
Minimum Lubrication In The Drilling Process Of Aluminum-Silicon Alloy - A356 (Sae 323)
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR99-163:1999
Analysis Of No. 50 Taper Joint Stiffness Under Axial And Radial Loading
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME AD99-106
A New Adhesive Joint Test Suggests Failure Unpredicted By Standard Test Methods
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-261
Predicting Onset Of Tensile Residual Stress In Grinding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-125
Relationship Of The Significant Elements Of Uv Lamps To The Uv Curing Process Window
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-166:1999
Influence Of Material Microstructure On Tool Performance In High Speed Machining
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MS99-183:1999
Automatic Scanning Process Planning Using A Stripe Sensor
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-189
Data Reduction For Computational Analysis Of 3d Coordinate Measurement Data
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF99-103
Infrared Heaters Assist Flameless Ration Heaters Manufacturer Stay Competitive
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-217
Superfinishing Of Hard Turned Or Ground Surfaces With In-Process Gauging To Size
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-130
Design And Analysis Of Direct Cold Drawing Of Section Rods Using Semi-Analytical Finite Element Method
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME CM99-193:1999
Low Pressure Structural Foam Molding Carry The Load With Style
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-134:1999
Experimental Study Of Burr Formation In Drilling Of Intersecting Holes With Gun And Twist Drills
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS99-146
Optimal Tool Path Generation Of Rough Cutting For Sculptured Surfaces Based On Path Patterns
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-141
Mincapp: An Explanatory Computer-Aided Process Planning System
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-151
Ejection Of Central Liquid Metal In Slab During Solidification Using Sequential Forging With Specified Dies
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME IQ99-111
Mathematical Modeling Of Reliability And Maintainability Of Polishing Equipment: A Filtration Perspective
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR99-249
Design Of High Stiffness Ultraprecision Centerless Grinding Machine
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
SME MF99-282
Forming Inertia - A New Concept Of Roll Forming Technology
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-159:1999
Determination Of Constant 3d Cutting Force Coefficients And Of Runout Parameters In End Milling
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME FC99-215
How To "Safely Produce" Map Packages While Increasing Shelf Life And Adding Profits To The Bottom Line
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-205
From Polymer To Package: How To Get There And What To Look Out For
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MS99-182:1999
Non-Linear Methods For Conicity Tolerance Verification
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME AD99-216
Flame Brazing Copper With Copper-Phosphorus Filler Metals
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-245
Material Removal Rate And Surface Roughness Of The Magnetic-Abrasive Process
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME PE99-121
Rapid Prototyping In Composite Board Injection Molds Promotes Production Of Modular Automotive Components
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-264
Turbo-Abrasive Machining And Turbo-Polishing In The Continuous Flow Manufacturing Environment
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME CM99-120:1999
Gas Quenching And Control Of Distortion In Vacuum Furnaces
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-197
The Physical Determinants Of Polish Swirl Visibility
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-202
A Case Study In I.D. Soft Honing Of Hard Turned Steel Gears
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME AD99-210
The Effect Of Tip Force On Weld Quality And Electrode Life
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-169:1999
Improvement Of Workpiece Quality Of Ceramic Engine Valves By Kinematic Simulation Of The Valve Grinding Operation
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS99-184:1999
A "Gato" Algorithm For The Setup Planning Of Prismatic Parts
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MF99-152
The Role Of Tool Segments In Determining Failure Characteristics Of Cross Wedge Rolling
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME AD99-218
Resistance Ring Projection Welding - The Basics Of The Application And Equipment
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-204
High Speed Machining Of Unsupported Thin-Walled Structures
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-149
The Use Of Active Drawbeads In The Forming Of Non-Symmetric Aluminum Panels
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-230
Experimental And Theoretical Study Of The Temperature Distribution On Diamond Dressing Tools For Precision Grinding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF99-213
Design And Application Of Vacuum Furnaces With 2, 6, And 10/20 Bar Gas Quenching Capabilities
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MR99-160:1999
Modeling Of Five-Axis End Mill Cutting Using Axially Discretized Tool Moves
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-148
Theoretical And Experimental Analysis Of Surface Quality During Glass Lubricated Hot Extrusion Process
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-161:1999
A Finite Element Analysis Of Chip Formation In The Machining Of Fiber Reinforced Plastics
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-237
Grinding Of Ceramics With Attention To Strength And Depth Of Grinding Damage
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS99-187:1999
Neural Network Based Sensor Fusion For On-Line Prediction Of Delamination And Surface Roughness In Drilling As4/Peek Composites
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-137:1999
Pulsed Ecm: Effect Of Process Parameters On Surface Finish And Mechanical Fatigue Life Of H-13 Tool Steel
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR99-226
Effects Of Friction And Wear Characteristics Of Regulating Wheel On Centerless Grinding
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME AD99-211
Latest Improvements In Shearwelders And Accumulators For Tube And Pipe Mills
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF99-154
Blank Design In Sheet Metal Forming By The Backward Tracing Scheme Of The Finite Element Method
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS99-144
A Fiber-Optic Based Sensor Probe For Surface Roughness Measurement
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC99-123
Design And Implementation Of Electro-Coating Systems
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS99-175:1999
Multi-Agent Process Planning For A Networked Machining Service
01/11/1999 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MR98-126:1998
Die Cutting For The Automotive Soft Trim Industry: New Ways Of Increasing Productivity, Efficiency, Quality And Versatility
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-178:1998
Machinability Characterization In Drilling Graphite Fiber-Composites
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS98-190
Vibration Analysis Of A Ball Bearing With An Integrated Sensor
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS98-262
The Impact Of Surface Errors On Fixtured Workpiece Location And Orientation
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS98-185
Automated Yarn Creeling For The Fabric And Carpet Industry
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR98-254
A Comparative Study Of Dry Machining Of A390 Alloy Using Pcd And Cvd Diamond Tools
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-328
Using Real Industry Sites For Laboratory Instruction
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-309:1998
Development Of A Concurrent Engineering Scenario For Educational Purposes
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-234
Assessment Of Machining Performance Of Dental Ceramics
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
19,00 €
-
19,00 €
-
19,00 €
-
SME MF98-271
Justifying, Selecting And Implementing Tube Bending Methods
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MR98-177:1998
Economical Cryogenic Milling For Environmentally Safe Manufacturing
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-315
Teaching Life Cycle Engineering As An Integral Part Of Manufacturing Engineering
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME PE98-117
Eliminating Prototype Tooling In Metal Casting Yields A Seamless Transition From Cad To Manufacturing--A Case Study
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF98-233
Modeling And Evaluation Of Superplastic Forming Of Weldalite(Tm) 049 Sheet Products
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME ER98-296
The Greenfield Coalition: Changing The Paradigm In Manufacturing Engineering/Technology Education
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS98-108
Multimedia Design Network For Manufacturing System'S Management
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-322
Continuous Improvements In A Project Based Learning Context
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-246
Finite Element Analysis Of Drilling Burr Minimization With A Backup Material
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF98-229
Roll Pass Design Optimization Applying Fuzzy Reasoning Techniques
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF98-163
In-Line Gauge Control In Cold Roll Formed Section Production
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MS98-159
A Low-Cost Wireframe-To-Solid Implementation For Reverse Engineering
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
SME MF98-221
An Analytical Model For Predicting Flange Wrinkling In Deep Drawing
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC98-268
Towards The Development Of More Effective Surface Inspection Methods
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME CM98-207
High Pressure Gas Quenching Typical Oil Hardening Grades Of Steel
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME AD98-336
Meeting The Demands Of The Psa Label Industry With New Developments In Psa Polymers
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME MF98-339
Remote Production Monitoring Systems - Increases Plant Productivity And Decreases Press And Die Damage
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS98-265
Fixture Layout Optimization Considering Workpiece-Fixture Contact Interaction: Simulation Results
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-150:1998
Gravimetric & Volumetric Feeding Technology For Powder Base Resin
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-272:1998
Coordinate Motion Systems - Technology And Applications
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC98-125
Automotive Powder Topcoat Facilities: Are We Ready For Clearcoat?
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-318
Integrating Micro-Systems Technology Research Into The Engineering Curricula
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME FC98-282
Carbamate-Based Flexible Clearcoat For Improved Durability
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MR98-183:1998
Calibration Of Rotary Table In Multi-Axis Machine Tools
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME FC98-116
Material, Process And Application Trends In Automotive Powder Coating Systems Relevant To "Class A" Requirements
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
SME FC98-345
Pre-Made Pouch Making And Fill-Seal Technology - The New Alternative Solution
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME ER98-301:1998
Challenges In Assessing Learned Competencies In Manufacturing
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
19,00 €
-
SME MS98-214
Microprocessor Based On-Board Diagnostics In Solid State Induction Heating Power Supplies
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MF98-224
Incremental Hammering Forming Of Sheet Metal Using Ccd Camera And Database
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
19,00 €
-
19,00 €
-
SME MS98-149
Management Strategies For Maintenance Process Improvement
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 € -
SME MS98-189
Prediction Of Tool Wear And Tool Failure In Milling By Utilizing Magnetostrictive Torque Sensor
01/11/1998 - PDF - Anglais - SME
En savoir plus19,00 €