IEEE/ANSI C63.10:2020

IEEE/ANSI C63.10:2020

American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices

Disponibilité: En stock.

176,00 €

Détails

Revision Standard - Active.
The procedures for testing the compliance of a wide variety of unlicensed wireless transmitters (also called intentional radiators and license-exempt transmitters) including, but not limited to, remote control and security unlicensed wireless devices, frequency hopping and direct sequence spread spectrum devices, antipilferage devices, cordless telephones, medical unlicensed wireless devices, Unlicensed National Information Infrastructure (U-NII) devices, intrusion detectors, unlicensed wireless devices operating on frequencies below 30 MHz, automatic vehicle identification systems, and other unlicensed wireless devices authorized by a radio regulatory authority are covered in this standard. Excluded by this standard are test procedures for unlicensed wireless devices already covered in other published standards (e.g., Unlicensed Personal Communication Services (UPCS) devices).

This standard specifies U.S. consensus standard methods and instrumentation and test facilities requirements for measurement of radio frequency (RF) signals and noise emitted from unlicensed wireless devices (also called unlicensed transmitters, intentional radiators, and license-exempt transmitters) operating in the frequency range 9 kHz to 231 GHz. It does not include generic or product specific emission limits. It also does not cover measurement of radio emissions from unintentional radiators, as mentioned in 1.2. Where possible, the specifications herein are harmonized with other national and international standards used for similar purposes.
As described in 1.2 of this standard, measurement methods are provided for radiated and conducted emissions that can be generated by a variety of devices. For terms and phrases contained in the text that do not represent obvious or common usage, definitions are provided. In most cases, measurement instrumentation and calibration requirements, which should be used with this standard, are generally characterized in deference to standards dedicated to these subjects, which should be used in conjunction with this standard. Requirements for operation of test samples during measurements are presented for devices in general, as well as for specific types of devices that are frequently measured. Specific requirements for emission test data recording and reporting are presented with reference to general requirements contained in documents dedicated to standard laboratory practices, which should be used in conjunction with this standard. The main
Various unlicensed wireless devices (also known as unlicensed transmitters, intentional radiators, and license-exempt transmitters) are subject to certain regulatory requirements. The primary way to show compliance in meeting regulatory requirements is by testing such devices in a repeatable and reproducible manner. This standard presents the methods of measurement to show compliance with the technical specifications for the majority of current wireless devices in wide use. It is not expected that all unlicensed wireless devices on the market will in fact be covered by this standard.
This standard does not consider test methods for unlicensed wireless devices already covered in other published standards, such as, but not limited to:
a) Unlicensed Personal Communications Services devices covered under ANSI C63.17-2013
b) Dynamic Frequency Selection (DFS) functionality required for U-NII devices in the United States
c) Industrial, Scientific and Medical equipment
d) RF exposure conformity assessment methods subject to standards such as IEEE Std 1528-2003

Informations supplémentaires

Auteur Institute of Electrical and Electronics Engineers (IEEE)
Edité par IEEE
Type de document Norme
Edition révision n° 0
EAN ISBN 978-1-5044-7227-2
ICS 33.070.01 : Services mobiles en général
33.100.10 : Emission
Nombre de pages 268
Remplace IEEE/ANSI C63.10:2013
Modifié par IEEE/ANSI C63.10:2020/Cor1:2023
Mot-clé IEEE/ANSI C63.10-2020
Bon de commande