IEC 60079-11:2023

IEC 60079-11:2023

IEC 60079-11:2023 Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i"

446,00 €


IEC 60079-11:2023 specifies the construction and testing of intrinsically safe apparatus intended for use in explosive atmospheres, and for associated apparatus which is intended for connection to intrinsically safe circuits which enter such atmospheres.
This Type of Protection is applicable to electrical equipment in which the electrical circuits themselves are incapable of causing ignition of a surrounding explosive atmosphere. This includes electrical equipment which contains circuits that are intrinsically safe only under certain conditions, for example under battery supply with mains supply removed.
This document is also applicable to electrical equipment or parts of electrical equipment located outside the explosive atmosphere or protected by another Type of Protection listed in IEC 60079 0, where the intrinsic safety of the electrical circuits in the explosive atmosphere may depend upon the design and construction of such electrical equipment or parts of such electrical equipment. The electrical circuits exposed to the explosive atmosphere are assessed for use in such atmospheres by applying this document.
This document applies to sensors connected to intrinsically safe circuits but does not apply to the protection of catalytic elements for Group IIC or Group IIB + H2.
This document does not apply to Ex Equipment cable glands.
The requirements for intrinsically safe systems are provided in IEC 60079-25.
This document supplements and modifies the general requirements of IEC 60079-0, except as indicated in Table 1. Where a requirement of this document conflicts with a requirement of IEC 60079-0, the requirement of this document takes precedence.
Unless otherwise stated, the requirements in this document are applicable to both intrinsically safe apparatus and associated apparatus, and the generic term "apparatus" is used throughout the standard.
As this document applies only to electrical equipment, the term "equipment" used in the standard always means "electrical equipment".
This document applies to apparatus for use under the atmospheric conditions of IEC 60079 0 with additional requirements for use at extended atmospheric pressures in the range from 60 kPa (0,6 bar), up to 110 kPa (1,1 bar).
This seventh edition cancels and replaces the sixth edition published in 2011. This edition constitutes a technical revision.
The identification and significance of the changes between IEC 60079-11, Edition 7 (2022) and IEC 60079-11, Edition 6 (2011 + Corrigendum 1 (2012)) can be found in the table of changes in the foreword of the publication.

Informations supplémentaires

Auteur International Electrotechnical Commission (IEC)
Comité TC 31/SC 31G
Edité par IEC
Type de document Norme
Edition révision n° 7
ICS 29.260.20 : Matériel électrique pour atmosphères explosives
Nombre de pages 209
Remplace IEC 60079-11:2011,IEC 60079-11:2011 + Redline
Historique IEC 60079-11:2011,IEC 60079-11:2011 + Redline,IEC 60079-11:2011/ISH1:2014,IEC 60079-11:2011/COR1:2012,IEC 60079-11:2011/ISH2:2016,IEC 60079-11:2011/ISH3:2016,IEC 60079-11:2011/ISH4:2019,IEC 60079-11:2011/ISH6:2019,IEC 60079-11:2011/ISH5:2019
Mot-clé IEC60079-11,IEC 60079-11:2023,IEC 60079-11,TC 31/SC 31G