91.140.80 : Systèmes d'évacuation d'eau

Total des articles 1 à 200 de 641

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  • DIN CEN/TS 1455-2:2025-02

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023
    01/02/2025 - PDF - Allemand - DIN
    En savoir plus
    70,65 €

  • DIN CEN/TS 1566-2:2025-02

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023
    01/02/2025 - PDF - Allemand - DIN
    En savoir plus
    76,17 €

  • ISO/DIS 13272:2025

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression — Poly(chlorure de vinyle) non plastifié (PVC-U), polypropylène (PP), polypropylène avec modificateurs minéraux (PP-MD) et polyéthylène (PE) — Spécifications relatives aux regards et aux boîtes d'inspection et de branchement dans les zones de circulation et dans les réseaux enterrés
    10/01/2025 - Papier - Anglais - ISO
    En savoir plus
    75,00 €

  • 25/30476615 DC:2025

    BS ISO 13272 Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) - Specifications for manholes and inspection chambers in traffic areas and underground installations
    10/01/2025 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • 25/30489703 DC:2025

    BS EN ISO 11300-2 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 2: Thermoset composite materials
    06/01/2025 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • ISO/DIS 11300-2:2025

    Piping systems for rehabilitation of underground drains, sewers and water supply networks
    06/01/2025 - - - ISO
    En savoir plus
    75,00 €

  • 25/30486198 DC:2025

    BS EN ISO 11300-1 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 1: Polyethylene (PE) material
    03/01/2025 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • 25/30486202 DC:2025

    BS EN ISO 11300-3 Piping systems for rehabilitation of underground drains, sewers and water supply networks Part 3: Unplasticized poly (vinyl chloride) (PVC-U) material
    03/01/2025 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • ISO/DIS 11300-1:2025

    Piping systems for rehabilitation of underground drains, sewers and water supply networks
    03/01/2025 - - - ISO
    En savoir plus
    75,00 €

  • ISO/DIS 11300-3:2025

    Piping systems for rehabilitation of underground drains, sewers and water supply networks
    03/01/2025 - - - ISO
    En savoir plus
    75,00 €

  • ASTM C1802/C1802M-24

    Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
    01/12/2024 - PDF - Anglais - ASTM
    En savoir plus
    99,00 €

  • ASTM C1802/C1802M-24 + Redline

    Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
    01/12/2024 - PDF - Anglais - ASTM
    En savoir plus
    119,00 €

  • ISO/DIS 16611:2024

    Systèmes de canalisation en plastiques pour réseaux d'assainissement sans pression — Tuyaux non-circulaires, assemblages de tuyaux et raccords en plastiques thermodurcissables renforcés de verre (PRV) à base de résines de polyester non saturé (UP) — Dimensions, exigences et essais
    26/11/2024 - Papier - Anglais - ISO
    En savoir plus
    75,00 €

  • NBN ISO 13265:2024

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Assemblages pour applications enterrées sans pression — Méthode d'essai de la performance à long terme des assemblages avec garnitures d'étanchéité en élastomère par l'estimation de la pression d'étanchéité
    10/10/2024 - PDF - Anglais - NBN
    En savoir plus
    92,00 €

  • DIN ISO 16611:2024-10

    Plastics piping systems for drainage and sewerage without pressure - Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) - Dimensions, requirements and tests (ISO/DIS 16611:2024), Text in German and English
    01/10/2024 - PDF - Anglais, Allemand - DIN
    En savoir plus
    102,34 €

  • 24/30474126 DC:2024

    BS ISO 16611 Plastics piping systems for drainage and sewerage without pressure. Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP). Dimensions, requirements and tests
    02/09/2024 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • PR NF EN 1329-1, T54-017-1PR (09/2024)

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : Spécifications pour tubes, raccords et le système
    01/09/2024 - Papier - Anglais, Français - AFNOR
    En savoir plus
    128,50 €

  • DIN EN 1329-1:2024-08

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German and English version prEN 1329-1:2024
    01/08/2024 - PDF - Anglais, Allemand - DIN
    En savoir plus
    124,49 €

  • ASTM F3202-24

    Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
    01/07/2024 - PDF - Anglais - ASTM
    En savoir plus
    69,00 €

  • ASTM F3202-24 + Redline

    Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping
    01/07/2024 - PDF - Anglais - ASTM
    En savoir plus
    83,00 €

  • ASTM F2764/F2764M-24

    Standard Specification for 6?in. to 60 in. [150?mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    01/07/2024 - PDF - Anglais - ASTM
    En savoir plus
    69,00 €

  • ASTM F2764/F2764M-24 + Redline

    Standard Specification for 6?in. to 60 in. [150?mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    01/07/2024 - PDF - Anglais - ASTM
    En savoir plus
    83,00 €

  • 24/30478958 DC:2024

    BS 8490 Siphonic roof drainage systems. Guidance
    17/06/2024 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS ISO 13265:2024 + Redline

    Tracked Changes. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
    31/05/2024 - PDF - Anglais - BSI
    En savoir plus
    269,00 €

  • BS ISO 13265:2024

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
    28/05/2024 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • ISO 13265:2024

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression — Assemblages pour applications enterrées sans pression — Méthode d'essai de la performance à long terme des assemblages avec garnitures d'étanchéité en élastomère par l'estimation de la pression d'étanchéité
    22/05/2024 - Papier - Anglais - ISO
    En savoir plus
    113,00 €

  • UNE-EN 14366-1:2024

    Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations
    24/04/2024 - - - AENOR
    En savoir plus
    De: 76,00 €

  • DIN CEN/TS 14632:2024-04

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
    01/04/2024 - PDF - Allemand - DIN
    En savoir plus
    95,23 €

  • ASTM A888-24

    Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    01/04/2024 - PDF - Anglais - ASTM
    En savoir plus
    115,00 €

  • ASTM A888-24 + Redline

    Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
    01/04/2024 - PDF - Anglais - ASTM
    En savoir plus
    138,00 €

  • UNE-EN 1401-1:2020+A1:2024

    Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    20/03/2024 - - - AENOR
    En savoir plus
    De: 88,00 €

  • DIN CEN/TS 1455-2:2024-03

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
    01/03/2024 - PDF - Allemand - DIN
    En savoir plus
    71,00 €

  • DIN CEN/TS 1566-2:2024-03

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023.
    01/03/2024 - PDF - Allemand - DIN
    En savoir plus
    71,00 €

  • DIN CEN/TS 1329-2:2024-03

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1329-2:2021
    01/03/2024 - PDF - Allemand - DIN
    En savoir plus
    95,42 €

  • NBN ISO 4633:2023

    Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux
    21/12/2023 - PDF - Anglais - NBN
    En savoir plus
    92,00 €

  • UNE-EN 1455-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
    20/12/2023 - - - AENOR
    En savoir plus
    De: 86,00 €

  • UNE-EN 1566-1:2023

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
    20/12/2023 - - - AENOR
    En savoir plus
    De: 89,00 €

  • UNE-EN ISO 11296-9:2023

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
    20/12/2023 - - - AENOR
    En savoir plus
    De: 85,00 €

  • UNE-EN 607:2023

    Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
    22/11/2023 - - - AENOR
    En savoir plus
    De: 70,00 €

  • PD CEN/TS 1455-2:2023 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
    06/11/2023 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

  • UNE-CEN/TS 14632:2023

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
    03/11/2023 - PDF - Anglais - AENOR
    En savoir plus
    76,00 €

  • PD CEN/TS 1566-2:2023 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
    03/11/2023 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

  • DIN EN 1455-1:2023-11

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system, German version EN 1455-1:2022
    01/11/2023 - PDF - Allemand - DIN
    En savoir plus
    108,13 €

  • DIN EN 1566-1:2023-11

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system, German version EN 1566-1:2022
    01/11/2023 - PDF - Allemand - DIN
    En savoir plus
    113,27 €

  • UNE-EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
    31/10/2023 - - - AENOR
    En savoir plus
    De: 57,00 €

  • UNE-EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
    31/10/2023 - - - AENOR
    En savoir plus
    De: 63,00 €

  • UNE-EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
    31/10/2023 - - - AENOR
    En savoir plus
    De: 60,00 €

  • PD CEN/TS 1566-2:2023

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
    19/10/2023 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • PD CEN/TS 1455-2:2023

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
    19/10/2023 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • CEN/TS 1455-2:2023

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 2 : Évaluation de la conformité
    18/10/2023 - PDF - Allemand - NBN
    En savoir plus
    121,00 €

  • CEN/TS 1566-2:2023

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 2 : Évaluation de la conformité
    18/10/2023 - PDF - Allemand - NBN
    En savoir plus
    121,00 €

  • CEN/TS 1455-2:2023

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 2 : Évaluation de la conformité
    18/10/2023 - PDF - Anglais - NBN
    En savoir plus
    121,00 €

  • CEN/TS 1566-2:2023

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 2 : Évaluation de la conformité
    18/10/2023 - PDF - Anglais - NBN
    En savoir plus
    121,00 €

  • NBN ISO 4982:2023

    Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l'eau non potable — Chambres en forme d'arche en PE ou PP, à parois annelées, utilisées pour les systèmes de transport, de stockage et de rétention des eaux pluviales — Spécifications des produits et critères de performance
    17/10/2023 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • ASTM C1920-23

    Standard Practice for Cleaning of Vitrified Clay Sanitary Sewer Pipelines
    01/10/2023 - PDF - Anglais - ASTM
    En savoir plus
    61,00 €

  • ASTM C1920-23 + Redline

    Standard Practice for Cleaning of Vitrified Clay Sanitary Sewer Pipelines
    01/10/2023 - PDF - Anglais - ASTM
    En savoir plus
    73,00 €

  • DIN EN ISO 13267:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022), German version EN ISO 13267:2023
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    74,95 €

  • DIN EN ISO 13268:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022), German version EN ISO 13268:2023
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    74,95 €

  • DIN EN ISO 13266:2023-09

    Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022), German version EN ISO 13266:2023
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    61,40 €

  • DIN EN 14366-1:2023-09

    Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations, German version EN 14366-1:2023
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    108,13 €

  • BS ISO 4633:2023

    Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
    01/09/2023 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • ISO 4633:2023

    Joints étanches en caoutchouc — Garnitures de joints de canalisations d'adduction et d'évacuation d'eau (égouts inclus) — Spécification des matériaux
    31/08/2023 - Papier - Anglais - ISO
    En savoir plus
    113,00 €

  • DIN CEN/TS 1519-2:2023-08

    Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1519-2:2020.
    01/08/2023 - PDF - Allemand - DIN
    En savoir plus
    65,51 €

  • DIN EN ISO 23856:2023-08

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021), German version EN ISO 23856:2021.
    01/08/2023 - PDF - Allemand - DIN
    En savoir plus
    162,80 €

  • DIN EN 1519-1:2023-08

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system, German version EN 1519-1:2019 + AC:2021
    01/08/2023 - PDF - Allemand - DIN
    En savoir plus
    108,13 €

  • BS EN 14366-1:2023 + Redline

    Tracked Changes. Laboratory measurement of airborne and structure-borne sound from service equipment Application rules for waste water installations
    27/07/2023 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • BS EN 14366-1:2023

    Laboratory measurement of airborne and structure-borne sound from service equipment Application rules for waste water installations
    25/07/2023 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • NBN EN 14366-1:2023

    Mesurage en laboratoire des bruits aériens et structuraux des équipements techniques - Partie 1 : Règles d’application aux installations d’évacuation des eaux usées
    19/07/2023 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN 14366-1:2023

    Mesurage en laboratoire des bruits aériens et structuraux des équipements techniques - Partie 1 : Règles d’application aux installations d’évacuation des eaux usées
    19/07/2023 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN 14366-1:2023

    Mesurage en laboratoire des bruits aériens et structuraux des équipements techniques - Partie 1 : Règles d’application aux installations d’évacuation des eaux usées
    19/07/2023 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • PD CEN/TS 14632:2023 + Redline

    Tracked Changes. Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
    05/07/2023 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • UNE-EN 1253-6:2023

    Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
    05/07/2023 - - - AENOR
    En savoir plus
    De: 74,00 €

  • UNE-EN 1253-8:2023

    Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
    05/07/2023 - - - AENOR
    En savoir plus
    De: 79,00 €

  • UNE-EN 1253-7:2023

    Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
    05/07/2023 - - - AENOR
    En savoir plus
    De: 78,00 €

  • PD CEN/TS 14632:2023

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
    30/06/2023 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • CEN/TS 14632:2023

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
    29/06/2023 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • CEN/TS 14632:2023

    Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
    29/06/2023 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • ISO 4982:2023

    Systèmes de canalisations en plastique pour le transport et le stockage souterrains sans pression de l'eau non potable — Chambres en forme d'arche en PE ou PP, à parois annelées, utilisées pour les systèmes de transport, de stockage et de rétention des eaux pluviales — Spécifications des produits et critères de performance
    27/06/2023 - Papier - Anglais - ISO
    En savoir plus
    204,00 €

  • BS EN 1566-1:2022 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
    08/06/2023 - PDF - Anglais - BSI
    En savoir plus
    432,00 €

  • DIN EN 1329-1:2023-06

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 1329-1:2020
    01/06/2023 - PDF - Allemand - DIN
    En savoir plus
    118,79 €

  • DIN EN 1253-6:2023-06

    Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm, German version EN 1253-6:2022
    01/06/2023 - PDF - Allemand - DIN
    En savoir plus
    102,34 €

  • DIN EN 1253-7:2023-06

    Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure, German version EN 1253-7:2022
    01/06/2023 - PDF - Allemand - DIN
    En savoir plus
    102,34 €

  • DIN EN 1253-8:2023-06

    Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal, German version EN 1253-8:2022
    01/06/2023 - PDF - Allemand - DIN
    En savoir plus
    102,34 €

  • ASTM C1802-23 + Redline

    Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
    01/05/2023 - PDF - Anglais - ASTM
    En savoir plus
    119,00 €

  • NF EN 1401-1+A1, P16-352-1 (04/2023)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
    01/04/2023 - Papier - Français - AFNOR
    En savoir plus
    102,33 €

  • NF EN 1401-1/IN1, P16-352-1/IN1 (04/2023)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
    01/04/2023 - Papier - Français - AFNOR
    En savoir plus
    24,00 €

  • BS EN 1455-1:2022 + Redline

    Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
    21/03/2023 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • BS EN 1566-1:2022

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
    13/03/2023 - PDF - Anglais - BSI
    En savoir plus
    331,00 €

  • BS EN 1455-1:2022

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
    09/03/2023 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • DIN EN ISO 11296-9:2023-03

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
    01/03/2023 - PDF - Allemand - DIN
    En savoir plus
    113,27 €

  • 23/30437565 DC:2023

    BS ISO 13265. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
    08/02/2023 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS EN ISO 13266:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
    02/02/2023 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • ASTM F2764/F2764M-23 + Redline

    Standard Specification for 6?in. to 60 in. [150?mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    01/02/2023 - PDF - Anglais - ASTM
    En savoir plus
    68,00 €

  • BS EN ISO 13268:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
    25/01/2023 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • BS EN ISO 13267:2023

    Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
    25/01/2023 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • NBN EN ISO 13266:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
    15/01/2023 - PDF - Français - NBN
    En savoir plus
    37,00 €

  • NBN EN ISO 13267:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
    15/01/2023 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 13266:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
    15/01/2023 - PDF - Allemand - NBN
    En savoir plus
    37,00 €

  • NBN EN ISO 13267:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
    15/01/2023 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 13266:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
    15/01/2023 - PDF - Anglais - NBN
    En savoir plus
    37,00 €

  • NBN EN ISO 13267:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
    15/01/2023 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 13268:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
    14/01/2023 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 13268:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
    14/01/2023 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 13268:2023

    Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
    14/01/2023 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • NBN EN 1566-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Français - NBN
    En savoir plus
    163,00 €

  • NBN EN 1455-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Français - NBN
    En savoir plus
    163,00 €

  • NBN EN 1566-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • NBN EN 1455-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • NBN EN 1566-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • NBN EN 1455-1:2022

    Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    15/12/2022 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • NF EN 1455-1, T54-914-1 (12/2022)

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
    01/12/2022 - Papier - Français - AFNOR
    En savoir plus
    111,33 €

  • NF EN 1566-1, T54-919-1 (12/2022)

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : spécifications pour tubes, raccords ainsi que pour le système
    01/12/2022 - Papier - Français - AFNOR
    En savoir plus
    111,33 €

  • BS EN 1253-6:2022

    Gullies for buildings Trapped floor gullies with a depth of water seal less than 50 mm
    01/11/2022 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • BS EN 1253-7:2022

    Gullies for buildings Trapped floor gullies with mechanical closure
    01/11/2022 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • BS EN 1253-8:2022

    Gullies for buildings Trapped floor gullies with combined mechanical closure and water seal
    01/11/2022 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • ASTM A1109-22

    Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
    01/11/2022 - PDF - Anglais - ASTM
    En savoir plus
    69,00 €

  • ASTM A1109-22 + Redline

    Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
    01/11/2022 - PDF - Anglais - ASTM
    En savoir plus
    83,00 €

  • BS ISO 23711:2022

    Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
    31/10/2022 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • NBN EN 1253-8:2022

    Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d’eau
    28/10/2022 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-7:2022

    Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
    28/10/2022 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-6:2022

    Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d’eau inférieure à 50 mm
    28/10/2022 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-8:2022

    Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d’eau
    28/10/2022 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-7:2022

    Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
    28/10/2022 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-6:2022

    Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d’eau inférieure à 50 mm
    28/10/2022 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-8:2022

    Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d’eau
    28/10/2022 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-7:2022

    Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
    28/10/2022 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • NBN EN 1253-6:2022

    Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d’eau inférieure à 50 mm
    28/10/2022 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • BS EN ISO 11296-9:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
    17/10/2022 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • ISO 23711:2022

    Garnitures d'étanchéité en caoutchouc — Spécification des matériaux pour garnitures d'étanchéité utilisées dans le domaine de l'eau et du drainage — Élastomères thermoplastiques
    14/10/2022 - Papier - Anglais - ISO
    En savoir plus
    75,00 €

  • NBN EN ISO 11296-9:2022

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
    13/10/2022 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN ISO 11296-9:2022

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
    13/10/2022 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN ISO 11296-9:2022

    Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
    13/10/2022 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • NF EN 1852-1+A1, P16-357-1 (10/2022)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène (PP) - Partie 1 : spécifications pour tubes, raccords et le système
    01/10/2022 - Papier - Français - AFNOR
    En savoir plus
    102,33 €

  • NF EN 1253-7, P16-330-7 (10/2022)

    Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
    01/10/2022 - Papier - Français - AFNOR
    En savoir plus
    102,33 €

  • NF EN 1253-6, P16-330-6 (10/2022)

    Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d'eau inférieure à 50 mm
    01/10/2022 - Papier - Français - AFNOR
    En savoir plus
    89,33 €

  • NF EN 1253-8, P16-330-8 (10/2022)

    Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d'eau
    01/10/2022 - Papier - Français - AFNOR
    En savoir plus
    102,33 €

  • NF EN 1852-1/IN1, P16-357-1/IN1 (10/2022)

    Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène (PP) - Partie 1 : spécifications pour tubes, raccords et le système
    01/10/2022 - Papier - Français - AFNOR
    En savoir plus
    24,00 €

  • 22/30434611 DC:2022

    BS ISO 4633. Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
    13/09/2022 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS EN 476:2022 + Redline

    Tracked Changes. General requirements for components used in drains and sewers
    13/09/2022 - PDF - Anglais - BSI
    En savoir plus
    382,00 €

  • ISO 11296-9:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks
    13/09/2022 - - - ISO
    En savoir plus
    178,00 €

  • ISO 13267:2022

    Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics inspection chamber and manhole bases — Test methods for buckling resistance
    15/06/2022 - - - ISO
    En savoir plus
    75,00 €

  • ISO 13266:2022

    Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of resistance against surface and traffic loading
    15/06/2022 - - - ISO
    En savoir plus
    49,00 €

  • ISO 13268:2022

    Thermoplastics piping systems for non-pressure underground drainage and sewerage — Thermoplastics shafts or risers for inspection chambers and manholes — Determination of ring stiffness
    15/06/2022 - - - ISO
    En savoir plus
    75,00 €

  • UNE-EN 877:2022

    Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
    08/06/2022 - - - AENOR
    En savoir plus
    De: 103,00 €

  • DIN 3603:2022-06

    Test methods for cyclic load change internal pressure tests for the renovation and repair of sewage pressure pipe systems
    01/06/2022 - PDF - Allemand - DIN
    En savoir plus
    74,95 €

  • UNE-EN ISO 11296-7:2022

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
    25/05/2022 - - - AENOR
    En savoir plus
    De: 74,00 €

  • BS EN 476:2022

    General requirements for components used in drains and sewers
    13/05/2022 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • BS 4660:2022 + Redline

    Tracked Changes. Thermoplastics ancillary fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage. Specification
    05/05/2022 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

  • BS 4660:2022

    Thermoplastics ancillary fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage. Specification
    26/04/2022 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • UNE-EN 1329-1:2022

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    13/04/2022 - - - AENOR
    En savoir plus
    De: 90,00 €

  • NF EN 476, P16-100 (04/2022)

    Exigences générales pour les composants utilisés pour les branchements et les collecteurs d'assainissement
    01/04/2022 - Papier - Français - AFNOR
    En savoir plus
    89,33 €

  • UNE-EN ISO 23856:2022

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
    23/03/2022 - - - AENOR
    En savoir plus
    De: 124,00 €

  • UNE-EN ISO 13259:2022

    Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
    09/03/2022 - - - AENOR
    En savoir plus
    De: 63,00 €

  • UNE 149002:2022

    Acceptance criteria for disposable products via toilet.
    16/02/2022 - PDF - Espagnol - AENOR
    En savoir plus
    83,00 €

  • 22/30445293 DC:2022

    BS EN 14366-1. Laboratory measurement of airborne and structure-borne sound from service equipment Part 1. Application rules for waste water installations
    27/01/2022 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS EN 12405-1:2021 + Redline

    Tracked Changes. Gas meters. Conversion devices Volume conversion
    10/12/2021 - PDF - Anglais - BSI
    En savoir plus
    559,00 €

  • UNE-EN 1519-1:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
    10/11/2021 - - - AENOR
    En savoir plus
    De: 83,00 €

  • UNE-EN ISO 11296-4:2018/A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
    03/11/2021 - - - AENOR
    En savoir plus
    De: 52,00 €

  • DIN EN ISO 11296-4:2021-11

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
    01/11/2021 - PDF - Allemand - DIN
    En savoir plus
    135,89 €

  • BS EN 12405-1:2021

    Gas meters. Conversion devices Volume conversion
    31/10/2021 - PDF - Anglais - BSI
    En savoir plus
    399,00 €

  • NF EN 877, A48-720 (10/2021)

    Réseaux de canalisations en fonte et leurs composants pour l'évacuation des eaux des bâtiments - Caractéristiques et méthodes d'essai
    01/10/2021 - Papier - Français - AFNOR
    En savoir plus
    134,67 €

  • BS ISO 19220:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
    29/07/2021 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • BS EN ISO 23856:2021

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    09/07/2021 - PDF - Anglais - BSI
    En savoir plus
    377,00 €

  • ISO 19220:2021

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur des bâtiments — Mélanges de copolymères de styrène (SAN + PVC)
    06/07/2021 - Papier - Anglais - ISO
    En savoir plus
    178,00 €

  • NBN EN ISO 23856:2021

    Systèmes de canalisations en matières plastiques pour l'alimentation en eau, les branchements et les collecteurs d'assainissement avec ou sans pression - Systèmes en plastiques thermodurcissables renforcés de verre (PRV) à base de résine de polyester non saturé (UP) (ISO 23856:2021)
    05/07/2021 - PDF - Allemand - NBN
    En savoir plus
    184,00 €

  • NBN EN ISO 23856:2021

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
    05/07/2021 - - - NBN
    En savoir plus
    184,00 €

  • ISO 23856:2021

    Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
    15/06/2021 - - - ISO
    En savoir plus
    229,00 €

  • BS EN ISO 11296-4:2018+A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
    14/06/2021 - PDF - Anglais - BSI
    En savoir plus
    370,00 €

  • NBN EN ISO 11296-4:2018/A1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
    28/05/2021 - - - NBN
    En savoir plus
    20,00 €

  • NBN ISO 16611:2021

    Systèmes de canalisation en plastiques pour réseaux d'assainissement sans pression — Tuyaux non-circulaires, assemblages de tuyaux et raccords en plastiques thermodurcissables renforcés de verre (PRV) à base de résines de polyester non saturé (UP) — Dimensions, exigences et essais
    26/05/2021 - PDF - Anglais - NBN
    En savoir plus
    121,00 €

  • BS EN 1519-1:2019

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Requirements pipes, fittings system
    14/04/2021 - PDF - Anglais - BSI
    En savoir plus
    312,00 €

  • UNE-CEN/TS 1329-2:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
    01/03/2021 - PDF - Anglais - AENOR
    En savoir plus
    69,00 €

  • ISO 11296-4:2018/Amd 1:2021

    Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 4: Lining with cured-in-place pipes
    08/02/2021 - - - ISO
    En savoir plus
    21,00 €

  • NBN EN 1329-1:2021

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : Spécifications pour tubes, raccords et le système
    27/01/2021 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • NBN EN 1329-1:2021

    Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
    27/01/2021 - - - NBN
    En savoir plus
    163,00 €

  • CEN/TS 1329-2:2021

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 2 : Guide pour l'évaluation de la conformité
    25/01/2021 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • CEN/TS 1329-2:2021

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 2 : Guide pour l'évaluation de la conformité
    25/01/2021 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • PD CEN/TS 1329-2:2021

    Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance assessment of conformity
    19/01/2021 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • NF EN 1329-1, T54-017-1 (12/2020)

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
    01/12/2020 - Papier - Français - AFNOR
    En savoir plus
    122,67 €

  • DIN EN ISO 13259:2020-10

    Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020), German version EN ISO 13259:2020
    01/10/2020 - PDF - Allemand - DIN
    En savoir plus
    74,95 €

  • UNE-CEN/TS 1519-2:2020

    Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
    01/09/2020 - PDF - Anglais - AENOR
    En savoir plus
    66,00 €

  • UNE-CEN/TS 17176-7:2020

    Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
    01/09/2020 - PDF - Anglais - AENOR
    En savoir plus
    71,00 €

  • NBN EN ISO 13259:2020

    Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
    27/08/2020 - - - NBN
    En savoir plus
    58,00 €

  • BS EN ISO 13259:2020

    Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
    13/08/2020 - PDF - Anglais - BSI
    En savoir plus
    191,00 €

  • DIN CEN/TS 1451-2:2020-08

    Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1451-2:2019
    01/08/2020 - PDF - Allemand - DIN
    En savoir plus
    70,65 €

  • PD CEN/TS 1519-2:2020

    Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Guidance assessment of conformity
    21/07/2020 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • PD CEN/TS 17176-7:2020

    Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Assessment of conformity
    20/07/2020 - PDF - Anglais - BSI
    En savoir plus
    266,00 €

  • 20/30420214 DC:2020

    BS EN 1455-1. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Part 1. Requirements pipes, fittings system
    20/07/2020 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • ISO 13259:2020

    Thermoplastics piping systems for underground non-pressure applications — Test method for leaktightness of elastomeric sealing ring type joints
    16/07/2020 - - - ISO
    En savoir plus
    75,00 €

  • CEN/TS 17176-7:2020

    Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterres ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 7 : Evaluation de la conformité
    10/07/2020 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • CEN/TS 17176-7:2020

    Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterres ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 7 : Evaluation de la conformité
    10/07/2020 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • CEN/TS 1519-2:2020

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Polyéthylène (PE) - Partie 2 : Guide pour l'évaluation de la conformité
    10/07/2020 - PDF - Allemand - NBN
    En savoir plus
    121,00 €

  • CEN/TS 1519-2:2020

    Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Polyéthylène (PE) - Partie 2 : Guide pour l'évaluation de la conformité
    10/07/2020 - PDF - Anglais - NBN
    En savoir plus
    121,00 €

  • BS EN ISO 11297-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
    27/02/2020 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

  • BS EN ISO 11297-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
    27/02/2020 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

  • BS EN 12050-1:2015 + Redline

    Tracked Changes. Wastewater lifting plants for buildings and sites Lifting wastewater containing faecal matter
    26/02/2020 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • BS EN 12050-2:2015 + Redline

    Tracked Changes. Wastewater lifting plants for buildings and sites Lifting faecal-free wastewater
    26/02/2020 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • BS EN 12050-3:2015 + Redline

    Tracked Changes. Wastewater lifting plants for buildings and sites Lifting limited applications
    26/02/2020 - PDF - Anglais - BSI
    En savoir plus
    438,00 €

  • BS EN ISO 13257:2018 + Redline

    Tracked Changes. Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
    26/02/2020 - PDF - Anglais - BSI
    En savoir plus
    269,00 €

  • BS EN ISO 11296-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
    26/02/2020 - PDF - Anglais - BSI
    En savoir plus
    373,00 €

Total des articles 1 à 200 de 641

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2
  3. 3
  4. 4