49 : Aéronautique et espace
-
BS ISO 1467:2024
General purpose push-pull single-pole circuit-breakers for aircraft. Performance requirements
12/04/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS EN 2939:2024 + Redline
Tracked Changes. Aerospace series. Screw, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650 °C
03/04/2024 - PDF - Anglais - BSI
En savoir plus197,00 € -
BS ISO 8575:2024 + Redline
Tracked Changes. Aerospace series. Fluid systems. Hydraulic system tubing
03/04/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
DIN EN 9215:2024-04
Programme Management - Definition justification and qualification - A guide to drawing up the definition justification plan and of the definition justification dossier, English version EN 9215:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus110,00 € -
DIN EN 3524:2024-04
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 2 mma 6 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3524:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 3525:2024-04
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Plates - 6 mma 20 mm - 1080 MPa R<(Index)m> 1280 MPa, German and English version EN 3525:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 3526:2024-04
Aerospace series - Steel 15CrMoV6 (1.7334) - Air melted - Hardened and tempered - Sheets and strips - 0,5 mma 6 mm - 980 MPa R<(Index)m> 1180 MPa, German and English version EN 3526:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
SAE AMS 5627J:2024-04-01
Steel, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 17Cr (430) Annealed
01/04/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
DIN EN 3311:2024-04
Aerospace series - Titanium alloy TI-P64001 (Ti-6Al-4V) - Annealed - Bars for machining - D300 mm - 900 MPa R<(Index)m> 1160 MPa, German and English version EN 3311:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 2794-001:2024-04
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification, German and English version EN 2794-001:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
DIN EN 2996-001:2024-04
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification, German and English version EN 2996-001:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
DIN EN 2995-001:2024-04
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 001: Technical specification, German and English version EN 2995-001:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
DIN EN 4708-204:2024-04
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 204: Limited fire hazard identification sleeves - Operating Temperature range -40 °C to 105 °C - Product standard, German and English version EN 4708-204:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus65,89 € -
DIN EN 2995-006:2024-04
Aerospace series - Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A - Part 006:6,3 mm & 2,8 mm blade terminal with polarized signal contact - Product standard, German and English version EN 2995-006:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
DIN EN 3774-006:2024-04
Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006: 6,3 blade terminal - Product standard, German and English version EN 3774-006:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
DIN EN 4840-002:2024-04
Aerospace series - Heat shrinkable moulded shapes - Part 002: Index of product standards and product dimensions, German and English version EN 4840-002:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus104,95 € -
DIN EN 2267-011:2024-04
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 011: DZA family, single and multicore assembly for use in low pressure atmosphere - Product standard, German and English version EN 2267-011:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus72,80 € -
DIN EN 2267-012:2024-04
Aerospace series - Cables, electrical, for general purpose - Operating temperatures between -65 °C and 260 °C - Part 012: DZ family, single UV laser printable for use in low pressure atmosphere - Product standard, German and English version EN 2267-012:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus72,80 € -
DIN EN 2996-006:2024-04
Aerospace series - Circuit breakers, three-poles, temperature compensated, rated currents 1 A to 25 A - Part 006:6,3 mm and 2,8 mm blade terminal - With polarized signal contact - Product standard, German and English version EN 2996-006:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
DIN EN 4708-002:2024-04
Aerospace series - Sleeving, heat-shrinkable, for binding, insulation and identification - Part 002: Index of Product standards, German and English version EN 4708-002:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 6095:2024-04
Aerospace series - Rotary fasteners - Structural and non-structural applications - Technical specification, German and English version EN 6095:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
DIN EN 4113:2024-04
Aerospace series - Clamps, loop ("P" type) in corrosion resisting steel, passivated with rubber cushioning - Dimensions, masses, German and English version EN 4113:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 4114:2024-04
Aerospace series - Clamps, loop ("P" type) in aluminium alloy with rubber cushioning - Dimensions, masses, German and English version EN 4114:2023
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 303213-5-1:2024-04
Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 5: Harmonised Standard for access to radio spectrum for Multilateration (MLAT) equipment - Sub-part 1: Receivers and Interrogators (Endorsement of the English version EN 303 213-5-1 V2.1.1 (2023-10) as a German standard).
01/04/2024 - PDF - Allemand - DIN
En savoir plus0,00 € -
BS ISO 14953:2024 + Redline
Tracked Changes. Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
28/03/2024 - PDF - Anglais - BSI
En savoir plus197,00 € -
SAE AMS 5805K:2024-03-27
Steel, Corrosion- and Heat-Resistant, Welding Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.004B - 0.30V Vacuum Induction Melted, Environment Controlled Packaging
27/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE AMS 5898C:2024-03-27
Steel, Corrosion Resistant, Bars, Wire, Forgings and Forging Stock 15.2Cr - 1.0Mo - 0.40N - (0.28 - 0.34C) Consumable Electrode Melted Under Pressure
27/03/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
SAE AMS 5903D:2024-03-27
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (302) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 5904D:2024-03-27
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 1/2 Hard, 150 ksi (1034 MPa) Tensile Strength
27/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AMS 5905D:2024-03-27
Steel, Corrosion-Resistant, Sheet and Strip 18Cr - 9.0Ni (302) Cold Rolled, 3/4 Hard, 175 ksi (1207 MPa) Tensile Strength
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 5907D:2024-03-27
Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 17Cr - 12Ni - 2.5Mo (316) Cold Rolled, 1/4 Hard, 125 ksi (862 MPa) Tensile Strength
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 6292L:2024-03-27
Steel Bars and Forgings and Forging Stock, Carburizing, Aircraft Quality, 1.8Ni - 0.25Mo - (0.15 - 0.20C), (SAE 4617)
27/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE AMS 6349F:2024-03-27
Steel Bars 0.95Cr - 0.20Mo (0.38 to 0.43C) (SAE 4140) Normalized
27/03/2024 - PDF - Anglais - SAE
En savoir plus75,00 € -
SAE AS 9357C:2024-03-27
NUT, PLAIN HEXAGON, SILVER PLATED, UNS S66286 130 KSI MIN
27/03/2024 - PDF - Anglais - SAE
En savoir plus39,00 € -
SAE AS 9882C:2024-03-27
NUT, PLAIN, HEXAGON - DRILLED, CADMIUM PLATED - UNS G878400, 125 KSI MIN
27/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AMS 4134H:2024-03-27
Aluminum Alloy, Die Forgings 4.4Cu - 0.85Si - 0.80Mn - 0.50Mg (2014-T4) Solution Heat and Naturally Aged
27/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE AMS 4150P:2024-03-27
Aluminum Alloy, Extrusions and Rings, 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr - (6061-T6), Solution and Precipitation Heat Treated
27/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AMS 4191K:2024-03-27
Aluminum Alloy, Welding Wire, 6.3Cu - 0.30Mn - 0.18Zr - 0.15Ti - 0.10V (2319)
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 4407B:2024-03-27
Aluminum Alloy, Plate (7056-T7651), 9.1Zn - 1.6Cu - 1.9Mg, Solution Heat Treated, Stress Relieved, and Overaged
27/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AMS 4964D:2024-03-27
Titanium Alloy Bars, Wire, Forgings, and Rings 4.5Al - 3V - 2Fe - 2Mo Annealed
27/03/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
SAE AMS 3021G:2024-03-27
Fluid, Reference for Testing Di-Ester (Polyol) Resistant Material
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 5870G:2024-03-27
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 60.5Ni - 23Cr - 14Fe - 0.35Ti - 1.4Al (Alloy 601), Solution Heat Treated
27/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 5966D:2024-03-27
Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 50Ni - 20Cr - 20Co - 5.9Mo - 2.2Ti - 0.45AI (Alloy 263) Consumable Electrode or Vacuum Induction Melted and Remelted
27/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
BS EN 9102:2024 + Redline
Tracked Changes. Aerospace series. Quality systems. First article inspection requirements
26/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS ISO 8575:2024
Aerospace series. Fluid systems. Hydraulic system tubing
26/03/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
SAE AS 5054B:2024-03-22
Areas for Calculating Stress or Load Values for Externally and Internally Threaded Fasteners (Stabilized: Mar 2024)
22/03/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
SAE AS 3511C:2024-03-22
CABLE, SAFETY, KIT, CORROSION RESISTANT STEEL, UNS S30400 (Stabilized: Mar 2024)
22/03/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
47,00 €
-
SAE ARP 6402B:2024-03-22
LED Landing, Taxiing, Runway Turnoff, and Recognition Lights
22/03/2024 - PDF - Anglais - SAE
En savoir plus120,00 € -
SAE AS 4983A:2024-03-22
Spring Pins, Tubular, Coiled Corrosion Resistant Nickel Base Alloy Procurement Specification For (Stabilized: Mar 2024)
22/03/2024 - PDF - Anglais - SAE
En savoir plus83,00 € -
SAE AS 1487A:2024-03-22
HOSE ASSEMBLY, SEMI-RIGID, LOW PRESSURE, FLARELESS, POTABLE WATER, 45° TO 90° (Stabilized: Mar 2024)
22/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AMS 5536R:2024-03-22
Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat Treated
22/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
BS EN 2943:2024 + Redline
Tracked Changes. Aerospace series. Insert, MJ and M screw threads, helical coil. Technical specification
21/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS ISO 17520:2024 + Redline
Tracked Changes. Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
21/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS EN 2939:2024
Aerospace series. Screw, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286). Classification: 900 MPa (at ambient temperature)/650 °C
20/03/2024 - PDF - Anglais - BSI
En savoir plus151,00 € -
BS ISO 14953:2024
Space systems. Structural design. Determination of loading levels for static qualification testing of launch vehicles
20/03/2024 - PDF - Anglais - BSI
En savoir plus151,00 € -
SAE AS 64350-3:2024-03-19
AS64350-362 NUT, UNION, SELF LOCKING, TUBE AND HOSE COUPLING
19/03/2024 - PDF - Anglais - SAE
En savoir plus100,00 € -
SAE AMS 5848F:2024-03-18
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Extrusions, and Rings, Wear and Galling Resistant, 8.0Mn - 4.0Si - 17Cr - 8.5Ni - 0.13N Solution Heat Treated
18/03/2024 - PDF - Anglais - SAE
En savoir plus75,00 € -
SAE AS 24461E:2024-03-18
BEARING, ROLLER, NEEDLE, SINGLE ROW, HEAVY DUTY, TYPE I, ANTIFRICTION, INCH
18/03/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
SAE ARP 1533D:2024-03-18
Procedure for the Analysis and Evaluation of Gaseous Emissions from Aircraft Engines
18/03/2024 - PDF - Anglais - SAE
En savoir plus136,00 € -
SAE AS 7928/5E:2024-03-18
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
18/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 81914A:2024-03-18
Tubing, Plastic, Flexible, Convoluted, Conduit, General Specification for
18/03/2024 - PDF - Anglais - SAE
En savoir plus101,00 € -
SAE ARP 5088C:2024-03-18
Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration
18/03/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
SAE AS 5127/2D:2024-03-18
Test Method for Aerospace Firewall Sealant Flame Penetration
18/03/2024 - PDF - Anglais - SAE
En savoir plus89,00 € -
BS EN 9102:2024
Aerospace series. Quality systems. First article inspection requirements
15/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS EN 2943:2024
Aerospace series. Insert, MJ and M screw threads, helical coil. Technical specification
14/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS ISO 32312-11:2024
Aircraft ground support equipment. Specific requirements Container/Pallet dollies and loose load trailers
14/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
NBN EN 9102:2024
Série aérospatiale - Systèmes qualité - Exigences pour la revue premier article
13/03/2024 - PDF - Français - NBN
En savoir plus142,00 € -
NBN EN 9102:2024
Aerospace series - Quality systems - First article inspection requirements
13/03/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
NBN EN 2939:2024
Série aérospatiale - Vis à tête fraisée 100°, empreinte cruciforme déportée, filetée jusqu'à proximité de la tête, en acier résistant à chaud FE-PA92HT (A286) - Classification : 900 MPa (à température ambiante)/650 °C
13/03/2024 - PDF - Français - NBN
En savoir plus58,00 € -
NBN EN 2939:2024
Aerospace series - Screw, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
13/03/2024 - PDF - Anglais - NBN
En savoir plus58,00 € -
SAE AIR 6110A:2024-03-12
Contiguous Aircraft/System Development Process Example (Stabilized: Mar 2024)
12/03/2024 - PDF - Anglais - SAE
En savoir plus156,00 € -
75,00 €
-
SAE AMS 5512N:2024-03-12
Steel, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 18Cr - 10.5Ni - 0.80Cb (347) Solution Heat Treated
12/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AS 3103B:2024-03-12
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, .4375-20 UNJF-3A
12/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 39029/78D:2024-03-12
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 16 (FOR MIL-DTL-38999 SERIES II CONNECTORS)
12/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
60,00 €
-
101,00 €
-
103,00 €
-
SAE AMS 5661H:2024-03-12
Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
12/03/2024 - PDF - Anglais - SAE
En savoir plus75,00 € -
BS ISO 17546:2024 + Redline
Tracked Changes. Space systems. Lithium ion battery for space vehicles. Design and verification requirements
12/03/2024 - PDF - Anglais - BSI
En savoir plus454,00 € -
BS ISO 17520:2024
Space environment (natural and artificial). Cosmic ray and solar energetic particle penetration inward the magnetosphere. Method of determination of the effective vertical cut-off rigidity
11/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS EN 3645-002:2024 + Redline
Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Specification of performance and contact arrangements
08/03/2024 - PDF - Anglais - BSI
En savoir plus454,00 € -
BS ISO 16454:2024 + Redline
Tracked Changes. Space systems. Structural design. Stress analysis requirements
08/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS EN 9300-125:2023
Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD PDM data Explicit assembly structure with Graphic Product Manufacturing Information (PMI)
06/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS EN 9300-121:2023
Aerospace series. LOTAR. LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD PDM data Semantic representation Explicit Geometry with Product Manufacturing Information
06/03/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
NBN EN 2943:2024
Série aérospatiale - Filets rapporté, filetages MJ et M - Spécification technique
06/03/2024 - PDF - Français - NBN
En savoir plus121,00 € -
NBN EN 2943:2024
Aerospace series - Insert, MJ and M screw threads, helical coil - Technical specification
06/03/2024 - PDF - Anglais - NBN
En savoir plus121,00 € -
BS ISO 26900:2024 + Redline
Tracked Changes. Space data and information transfer systems. Orbit data message
06/03/2024 - PDF - Anglais - BSI
En savoir plus586,00 € -
BS ISO 27852:2024 + Redline
Tracked Changes. Space systems. Estimation of orbit lifetime
06/03/2024 - PDF - Anglais - BSI
En savoir plus454,00 € -
BS ISO 16454:2024
Space systems. Structural design. Stress analysis requirements
05/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
SAE AIR 3260A:2024-03-04
Identification of Standard Utility Parts – Bolts and Nuts (Stabilized: Mar 2024)
04/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 5547J:2024-03-04
Steel, Corrosion- and Heat-Resistant, Sheet and Strip 15.5Cr - 4.5Ni - 2.9Mo - 0.10N Solution Heat Treated
04/03/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AMS 5692F:2024-03-04
Steel, Corrosion- and Heat-Resistant, Welding Wire 19Cr - 12.5Ni - 2.5Mo
04/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AS 3101B:2024-03-04
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, .3125-24 UNJF-3A
04/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 3102B:2024-03-04
BOLT, MACHINE - HEXAGON HEAD, PD, SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, .3750-24 UNFJ-3A
04/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AMS 4123L:2024-03-04
Aluminum Alloy, Rolled or Cold Finished Bars and Rods, (7075-T651), Solution and Precipitation Heat Treated
04/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AMS 4934J:2024-03-04
Titanium Alloy, Extrusions and Flash Welded Rings, 6Al - 4V, Solution Heat Treated and Aged
04/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE AS 3435A:2024-03-04
SPACER, SLEEVE – FOR .190 INCH BOLT, AMS4901 OR AMS4921 (Stabilized: Mar 2024)
04/03/2024 - PDF - Anglais - SAE
En savoir plus39,00 € -
NF EN 9102, L00-096 (03/2024)
Série aérospatiale - Systèmes qualité - Exigences pour la revue premier article
01/03/2024 - Papier - Français - AFNOR
En savoir plus78,50 € -
DIN EN 4709-002:2024-03
Aerospace series - Unmanned Aircraft Systems - Part 002: Direct Remote identification, German and English version EN 4709-002:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus158,04 € -
DIN EN 9101:2024-03
Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management systems, German and English version EN 9101:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus110,00 € -
ASTM F3309/F3309M-24
Standard Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F3309/F3309M-24 + Redline
Standard Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
NF EN 2943, L24-980 (03/2024)
Série aérospatiale - Filets rapportés, filetages MJ et M - Spécification technique
01/03/2024 - Papier - Français - AFNOR
En savoir plus68,50 € -
DIN 65314:2024-03
Aerospace series - Countersunk head bolts, close tolerance, with internal offset cruciform ribbed drive and MJ thread, short thread length, steel - Nominal tensile strength 1 100 MPa, for temperatures up to 235 °C, Text in German and English
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
SAE AMS 5649J:2024-03-01
Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Stock for Forgings, 18Cr - 13Ni - 2.1Mo (316FM) Free Machining Solution Heat Treated
01/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE AMS 5899D:2024-03-01
Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (440C) Powder Metallurgy Product, Hot Isostatically Pressed
01/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
DIN EN 4905:2024-03
Aerospace series - Passive UHF RFID for airborne use, German and English version EN 4905:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus99,35 € -
DIN EN 4906:2024-03
Aerospace series - Embedded tags - Choice of fixation for installation, removal and replacement of embedded tags, German and English version EN 4906:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus120,84 € -
DIN EN 2876:2024-03
Aerospace series - Nuts, hexagon, plain, reduced height, normal across flats, in aluminium alloy, anodized - Classification: 450 MPa (at ambient temperature)/120 °C, German and English version EN 2876:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus65,89 € -
DIN EN 2882:2024-03
Aerospace series - Nut, hexagonal, self-locking, with counterbore and captive washer, in steel, cadmium plated, MoS<(Index)2> lubricated - Classification: 1100 MPa (at ambient temperature)/235 °C, German and English version EN 2882:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 2516:2024-03
Aerospace series - Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys, German and English version EN 2516:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
SAE AMS 4127L:2024-03-01
Aluminum Alloy, Forgings and Rolled or Forged Rings, (6061-T6), Solution and Precipitation Heat Treated
01/03/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
SAE AMS 4600B:2024-03-01
Aluminum Alloy, Sheet and Plate, 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr, Solution Heat Treated, Cold Worked (8%) and Naturally Aged (2219 -T37)
01/03/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
96,00 €
-
DIN EN 6042:2024-03
Aerospace series - Organic compounds - Test method - Analysis by infrared spectroscopy, German and English version EN 6042:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus99,35 € -
DIN EN 6093:2024-03
Aerospace series - Receptacle, floating, single lug, German and English version EN 6093:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus72,80 € -
DIN EN 2665-001:2024-03
Aerospace series - Circuit breakers, three-pole, temperature compensated, rated currents 20 A to 50 A - Part 001: Technical specification, German and English version EN 2665-001:2023
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
SAE AS 21980C:2024-03-01
FERRULE, OUTER, UNINSULATED, SHIELD TERMINATING, TYPE I, TWO PIECE, CLASS I, FOR SHIELDED CABLES
01/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 7928/10E:2024-03-01
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, SPLICE, ELECTRIC, TIN WHISKER RESISTANT (PERMANENT, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
01/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 7928/1F:2024-03-01
TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE
01/03/2024 - PDF - Anglais - SAE
En savoir plus60,00 € -
SAE AS 25189C:2024-03-01
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, FLAG TONGUE, SIZES 8-0000, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
01/03/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 6446A:2024-03-01
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, INTERNAL PORT END ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
01/03/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
NF EN 301473, Z86-573 (03/2024)
Systèmes et stations terriennes de communications par satellite (SES) - Norme harmonisée couvrant les exigences essentielles de l'Article 3, paragraphe 2, de la Directive 2014/53/UE pour les stations terriennes d'aéronef (AES) destinées au service mobile aéronautique par satellite (SMAS)/service mobile par satellite (SMS) et/ou au service mobile aéronautique par satellite en route (SMAS(R))/service mobile par satellite (SMS), fonctionnant dans la bande de fréquences située en dessous de 3 GHz (V2.1.2)
01/03/2024 - Papier - Français - AFNOR
En savoir plus140,00 € -
NF ISO 12604-2, L91-400-2 (03/2024)
Traitement au sol des aéronefs - Bagages enregistrés - Partie 2 : exigences et directives de traitement
01/03/2024 - Papier - Français - AFNOR
En savoir plus75,67 € -
ASTM F3064/F3064M-24
Standard Specification for Aircraft Powerplant Control, Operation, and Indication
01/03/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F3064/F3064M-24 + Redline
Standard Specification for Aircraft Powerplant Control, Operation, and Indication
01/03/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
NBN ISO 23629-9:2024
UAS traffic management (UTM) — Part 9: Interface between UTM service providers and users ISO 23629-9:2023
29/02/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
NBN ISO 5309:2024
Civil small and light unmanned aircraft systems (UAS) — Vibration test methods ISO 5309:2023
29/02/2024 - PDF - Anglais - NBN
En savoir plus121,00 € -
NAS 1791:2024
Nut, Self-Locking, Plate, Two Lug, Floating, Variable Counterbore, Replaceable Nut Element, 125Ksi Ftu, 450 degrees F and 800 degrees F
29/02/2024 - PDF sécurisé - Anglais - NAS
En savoir plus57,00 € -
NAS 1792:2024
Nut, Self-Locking, Plate, One Lug, Floating, Variable Counterbore, Replaceable Nut Element, 125Ksi Ftu, 450 degrees F and 800 degrees F
29/02/2024 - PDF sécurisé - Anglais - NAS
En savoir plus57,00 € -
BS EN 2997-004:2024 + Redline
Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 °C to 175 continuous, 200 260 peak Jam-nut mounted receptacle. Product standard
29/02/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
BS ISO 27996:2024 + Redline
Tracked Changes. Aerospace fluid systems. Elastomer seals. Storage and shelf life
29/02/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
BS ISO 17546:2024
Space systems. Lithium ion battery for space vehicles. Design and verification requirements
29/02/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
348,00 € -
SAE AS 3099B:2024-02-27
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL UNS S66286, .1900-32UNJF-3A
27/02/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AS 9556F:2024-02-27
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION- AND HEAT-RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1900-32 UNJF-3A
27/02/2024 - PDF - Anglais - SAE
En savoir plus39,00 € -
SAE MA 3329E:2024-02-27
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, UNCOATED (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
SAE MA 3351A:2024-02-27
NUT, SPLINE DRIVE - EXTENDED WASHER, CUPWASHER LOCK, UNS S66826, SILVER PLATE, MJ THREAD, METRIC (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus47,00 € -
SAE AMS 4406B:2024-02-27
Aluminum Alloy, Centrifugal Castings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (709.0-T61) Hot Isostatically Pressed, Solution and Precipitation Heat Treated (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus79,00 € -
BS EN 3375-008:2024 + Redline
Tracked Changes. Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 Ohms. Type KD. Product standard
27/02/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
SAE ARP 1481B:2024-02-27
Corrosion Control and Electrical Conductivity in Enclosure Design (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AS 3436A:2024-02-27
SPACER, SLEEVE – FOR .250 INCH BOLT, AMS4901 OR AMS4921 (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus39,00 € -
SAE AS 3509C:2024-02-27
CABLE, SAFETY, KIT, NICKEL ALLOY, UNS N0660 (Stabilized: Feb 2024)
27/02/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
SAE ARP 1658C:2024-02-27
Hose Assemblies, Installed, Visual Inspection Guide for
27/02/2024 - PDF - Anglais - SAE
En savoir plus124,00 € -
BS EN 2997-006:2024 + Redline
Tracked Changes. Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 °C to 175 continuous, 200 260 peak Hermetic jam-nut mounted receptacle. Product standard
26/02/2024 - PDF - Anglais - BSI
En savoir plus197,00 € -
SAE AS 43800-7:2024-02-26
AS43800-899 BOLT, DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, .3125-24 UNJF-3A
26/02/2024 - PDF - Anglais - SAE
En savoir plus100,00 € -
SAE TS 363-3:2024-02-26
TS363 Test for Electrical Connectors Mechanical Endurance
26/02/2024 - PDF - Anglais - SAE
En savoir plus100,00 € -
SAE AIR 5926A:2024-02-23
White Paper to Support Supersession of MIL-S-8879C With AS8879C (Stabilized: Feb 2024)
23/02/2024 - PDF - Anglais - SAE
En savoir plus129,00 € -
SAE AS 4724A:2024-02-23
Studs and Inserts, Locked In, Self-Broaching Keys – Hole Dimensions and Installation Requirements (Stabilized: Feb 2024)
23/02/2024 - PDF - Anglais - SAE
En savoir plus66,00 € -
SAE AS 124951A:2024-02-23
RIVET – 100° COUNTERSUNK HEAD, CORROSION RESISTANT STEEL (Stabilized: Feb 2024)
23/02/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
BS EN 3645-002:2024
Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Specification of performance and contact arrangements
23/02/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
BS A 109:2024
AEROSPACE SERIES Bolts, shear, hexagonal heads, close tolerance shank, unified threads, alloy steel, cadmium plated (on head and thread only). Specification Classification Rm = 127 600 – 156 lbf/in2 (880 to 1080 MPa) at ambient temperature | +190°C
22/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS ISO 27996:2024
Aerospace fluid systems. Elastomer seals. Storage and shelf life
22/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
NBN EN 3645-002:2024
Série aérospatiale - Connecteurs électriques circulaires, à contacts protégés, à accouplement par filetage, à pas rapide à trois filets, température d’utilisation 175 °C ou 200 °C continu - Partie 002: Spécification de performances et d’arrangements des contacts
21/02/2024 - PDF - Français - NBN
En savoir plus184,00 € -
NBN EN 3645-002:2024
Aerospace series - Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 °C continuous - Part 002: Specification of performance and contact arrangements
21/02/2024 - PDF - Anglais - NBN
En savoir plus184,00 € -
BS EN 2997-004:2024
Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 °C to 175 continuous, 200 260 peak Jam-nut mounted receptacle. Product standard
19/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS EN 2997-006:2024
Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 °C to 175 continuous, 200 260 peak Hermetic jam-nut mounted receptacle. Product standard
19/02/2024 - PDF - Anglais - BSI
En savoir plus151,00 € -
SAE AS 1895F:2024-02-16
Coupling Assembly, V-Retainer, High Pressure High Temperature, Pneumatic Tube
16/02/2024 - PDF - Anglais - SAE
En savoir plus127,00 € -
79,00 €
-
SAE AMS 2479E:2024-02-16
Anodic Treatment of Magnesium Alloys Acid Type, Thin coat
16/02/2024 - PDF - Anglais - SAE
En savoir plus75,00 € -
BS EN 3375-008:2024
Aerospace series. Cable, electrical, for digital data transmission Single braid. Star Quad 100 Ohms. Type KD. Product standard
16/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS ISO 26900:2024
Space data and information transfer systems. Orbit data message
15/02/2024 - PDF - Anglais - BSI
En savoir plus449,00 € -
BS EN 2516:2023 + Redline
Tracked Changes. Aerospace series. Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys
14/02/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
NBN EN 2997-006:2024
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d’utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 006: Embase hermétique à fixation par écrou - Norme de produit
14/02/2024 - PDF - Français - NBN
En savoir plus58,00 € -
NBN EN 2997-004:2024
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 004 : Embase à fixation par écrou - Norme de produit
14/02/2024 - PDF - Français - NBN
En savoir plus58,00 € -
NBN EN 3375-008:2024
Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008 : Simple tresse - Quarte en étoile 100 ohms - Type KD - Norme de produit
14/02/2024 - PDF - Français - NBN
En savoir plus89,00 € -
NBN EN 2997-006:2024
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire-resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 006: Hermetic jam-nut mounted receptacle - Product standard
14/02/2024 - PDF - Anglais - NBN
En savoir plus58,00 € -
NBN EN 2997-004:2024
Aerospace series - Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures - 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Part 004: Jam-nut mounted receptacle - Product standard
14/02/2024 - PDF - Anglais - NBN
En savoir plus58,00 € -
NBN EN 3375-008:2024
Aerospace series - Cable, electrical, for digital data transmission - Part 008: Single braid - Star Quad 100 Ohms - Type KD - Product standard
14/02/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
SAE J 2392:2024-02-13
Categorization and Properties of SAE Cold Rolled Strip Steels
13/02/2024 - PDF - Anglais - SAE
En savoir plus83,00 € -
ARINC Characteristic 791P3:2024
791P3 Mark I Aviation Ku-Band and Ka-Band Satellite Communication System, Part 3, Information Transfer and Internetworking
13/02/2024 - PDF - Anglais - ARINC
En savoir plus330,00 € -
SAE AS 4723A:2024-02-12
Insert, Screw Thread, Self-Locking, UNS S66286, Key Locked, Plastic Self Locking Device, Solid Film Lubricant Procurement Specification For (Stabilized: Feb 2024)
12/02/2024 - PDF - Anglais - SAE
En savoir plus114,00 € -
SAE AS 9554F:2024-02-12
SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION- AND HEAT-RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1380-40 UNJF-3A
12/02/2024 - PDF - Anglais - SAE
En savoir plus39,00 € -
SAE AS 3616A:2024-02-12
NUT, SELF-LOCKING, DOUBLE HEXAGON REDUCED FLANGE, SOLID FILM LUBE COUNTERBORED 180 KSI, 1400 °F, UNS N07001 (Stabilized: Feb 2024)
12/02/2024 - PDF - Anglais - SAE
En savoir plus54,00 € -
79,00 €
-
79,00 €
-
ARINC Specification 661P2-1:2024
661P2-1 Cockpit Display System Interfaces, Part 2, User Interface Markup Language (UIML)
09/02/2024 - PDF - Anglais - ARINC
En savoir plus415,00 € -
ARINC Specification 661P1-9:2024
661P1-9 Cockpit Display System Interfaces to User Systems, Part 1, Avionics Interfaces, Basic Symbology, and Behavior
09/02/2024 - PDF - Anglais - ARINC
En savoir plus477,00 € -
UNE-EN 1915-1:2024
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
07/02/2024 - PDF - Espagnol - AENOR
En savoir plus110,00 € -
UNE-EN 1915-1:2024
Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements
07/02/2024 - PDF - Anglais - AENOR
En savoir plus132,00 € -
SAE AS 5377A:2024-02-06
Nut, Self-Locking, 0.7500 thru 1.5000 Thread Sizes, UNS S66286, 160,000 psi, 800 °F, UNJ Thread – Procurement Specification (Stabilized: Feb 2024)
06/02/2024 - PDF - Anglais - SAE
En savoir plus126,00 € -
BS EN 2516:2023
Aerospace series. Passivation of corrosion resisting steels and decontamination of nickel or cobalt base alloys
06/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS ISO 12604-2:2024
Aircraft ground handling. Checked baggage Handling requirements and guidelines
06/02/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
ASTM E2580-24
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM E2580-24 + Redline
Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
DIN EN 4881:2024-02
Aerospace series - Micro-arc oxidation of aluminium and aluminium alloys, German and English version EN 4881:2023
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
NF EN 3645-002, L54-144-002 (02/2024)
Série aérospatiale - Connecteurs électriques circulaires, à contacts protégés, à accouplement par filetage, à pas rapide à trois filets, température d'utilisation 175 °C ou 200 °C continu - Partie 002 : spécification de performances et d'arrangements des contacts
01/02/2024 - Papier - Français - AFNOR
En savoir plus119,00 € -
NF EN 3375-008, L52-270-008 (02/2024)
Série aérospatiale - Câbles électriques pour transmission de données numériques - Partie 008 : simple tresse - Quarte en étoile 100 ohms - Type KD - Norme de produit
01/02/2024 - Papier - Français - AFNOR
En savoir plus60,50 € -
NF EN 2997-004, L54-143-004 (02/2024)
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 004 : embase à fixation par écrou - Norme de produit
01/02/2024 - Papier - Français - AFNOR
En savoir plus60,67 € -
NF EN 2997-006, L54-143-006 (02/2024)
Série aérospatiale - Connecteurs électriques circulaires à accouplement par bague filetée, résistant au feu ou non, températures d'utilisation -65 °C à 175 °C continu, 200 °C continu, 260 °C en pointe - Partie 006 : embase hermétique à fixation par écrou - Norme de produit
01/02/2024 - Papier - Français - AFNOR
En savoir plus48,00 € -
DIN EN 3375-009:2024-02
Aerospace series - Cable, electrical, for digital data transmission - Part 009: Single braid - CAN Bus - 120 ohms - Type WX - Product standard, German and English version EN 3375-009:2023.
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN EN 303213-8:2024-02
Advanced Surface Movement Guidance and Control System (A-SMGCS) - Part 8: Community Specification for A-SMGCS guidance service (Endorsement of the English version EN 303 213-8 V2.1.1 (2023-09) as a German standard).
01/02/2024 - PDF - Allemand - DIN
En savoir plus0,00 € -
SAE AMS 4616H:2024-02-01
Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved
01/02/2024 - PDF - Anglais - SAE
En savoir plus70,00 € -
DIN EN 16603-20:2024-02
Space engineering - Electrical and electronic, English version EN 16603-20:2023
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus246,73 € -
DIN EN 16603-20-40:2024-02
Space engineering - ASIC, FPGA and IP Core engineering, English version EN 16603-20-40:2023
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus246,73 € -
BS ISO 5305:2024
Noise measurements for UAS (unmanned aircraft systems)
31/01/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
BS EN 3645-001:2022 + Redline
Tracked Changes. Aerospace series. Connectors, electrical, circular, scoop-proof, triple start threaded coupling, operating temperature 175 °C or 200 continuous Technical specification
29/01/2024 - PDF - Anglais - BSI
En savoir plus518,00 € -
ARINC Characteristic 791P2-2:2024
791P2-2 Mark I Aviation Ku-Band and Ka-Band Satellite Communication System, Part 2, Electrical Interfaces and Functional Equipment Description
29/01/2024 - PDF - Anglais - ARINC
En savoir plus383,00 €
