49.025.99 : Autres matériaux

Total des articles 1 à 200 de 1160

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  • SAE AMS 5536R:2024-03-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe (Alloy X or HX) Solution Heat Treated
    22/03/2024 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE ARP 5088C:2024-03-18

    Test Method for the Determination of Total Acidity in Polyol Ester and Diester Gas Turbine Lubricants by Automatic Potentiometric Titration
    18/03/2024 - PDF - Anglais - SAE
    En savoir plus
    79,00 €

  • SAE AS 5127/2D:2024-03-18

    Test Method for Aerospace Firewall Sealant Flame Penetration
    18/03/2024 - PDF - Anglais - SAE
    En savoir plus
    89,00 €

  • SAE AMS 5661H:2024-03-12

    Nickel-Iron Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging or Flash-Welded Rings 42.5Ni - 12.5Cr - 5.8Mo - 2.9Ti - 0.015B - 35Fe (Alloy 901) Consumable Electrode Remelted or Vacuum Induction Melted Solution Heat Treated, Stabilized, and Precipitation Heat Treated
    12/03/2024 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 1431F:2024-03-12

    Solid Runway Deicing/Anti-icing Product
    12/03/2024 - PDF - Anglais - SAE
    En savoir plus
    101,00 €

  • SAE AMS 1435E:2024-03-12

    Liquid Runway Deicing/Anti-icing Product
    12/03/2024 - PDF - Anglais - SAE
    En savoir plus
    103,00 €

  • SAE AMS 4616H:2024-02-01

    Silicon Bronze Bars, Rods, Forgings, and Tubing 92Cu - 3.2Si - 2.8Zn - 1.5Fe Stress Relieved
    01/02/2024 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 3045G:2024-01-16

    Magnetic Particles, Fluorescent Wet Method, Oil Vehicle, Ready-to-Use
    16/01/2024 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AS 4792C:2024-01-16

    Water Conditioning Agents for Aqueous Magnetic Particle Inspection
    16/01/2024 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 3044H:2024-01-05

    Magnetic Particles, Fluorescent Wet Method, Dry Powder
    05/01/2024 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 1424/2A:2023-12-13

    Deicing/Anti-Icing Fluid, Aircraft SAE Type I Non-Glycol Based
    13/12/2023 - PDF - Anglais - SAE
    En savoir plus
    39,00 €

  • SAE AMS 1551B:2023-12-13

    Cleaner, Turbine Engine Gas Path Aqueous Type (Stabilized: Dec 2023)
    13/12/2023 - PDF - Anglais - SAE
    En savoir plus
    89,00 €

  • SAE AMS 4371C:2023-12-13

    Magnesium Alloy, Plate 4.0Y - 2.25Nd - 0.5Zr (WE43C - T5) Precipitation Heat Treated
    13/12/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5545H:2023-12-13

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B (Rene 41) Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    13/12/2023 - PDF - Anglais - SAE
    En savoir plus
    79,00 €

  • SAE AMS 5702F:2023-12-13

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forging 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1750 °F (954 °C) Solution Heat Treated
    13/12/2023 - PDF - Anglais - SAE
    En savoir plus
    79,00 €

  • SAE AMS 2223J:2023-12-01

    Tolerances Copper and Copper Alloy Seamless Tubing
    01/12/2023 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5877C:2023-12-01

    Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings and Stock for Forgings, Rings or Heading 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta 0.30Al - 0.05La - 0.20N (HS-556) Solution Heat Treated
    01/12/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5682F:2023-11-20

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 78Ni - 20Cr (8020)
    20/11/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4640J:2023-11-10

    Aluminum Bronze, Bars, Rods, Shapes, Tubes, and Forgings 81.5Cu - 10.0Al - 4.8Ni - 3.0Fe Drawn and Stress Relieved (HR50) or Temper Annealed (TQ50)
    10/11/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • UNE-EN 3628:2023

    Aerospace series - Lockwire, drawn - Corrosion resisting steel (Endorsed by Asociación Española de Normalización in November of 2023.)
    05/11/2023 - PDF - Anglais - AENOR
    En savoir plus
    35,00 €

  • SAE AMS 4775L:2023-10-20

    Nickel Alloy, Brazing Filler Metal 73Ni - 0.75C - 4.5Si - 14Cr - 3.1B - 4.5Fe 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus
    20/10/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4612L:2023-10-16

    Brass, Naval, Bars and Rods, 60.5Cu - 38.5Zn - 0.75Sn, Hard Temper (H04)
    16/10/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4776K:2023-10-16

    Nickel Alloy, Brazing Filler Metal, 73Ni - 4.5Si - 14Cr - 3.1B - 4.5Fe (Low Carbon), 1790 °F (977 °C) Solidus to 1970 °F (1077 °C) Liquidus Range
    16/10/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5874D:2023-10-16

    Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N (HS-556) Solution Heat Treated
    16/10/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5876F:2023-10-16

    Cobalt Alloy, Corrosion- and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Remelted Solution Heat Treated and Cold Rolled
    16/10/2023 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 5838G:2023-10-06

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 65Ni - 16Cr - 15Mo - 0.30Al - 0.06La (S)
    06/10/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4777K:2023-10-05

    Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
    05/10/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5837H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (625)
    28/09/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5670H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Rings, Forgings, and Heading 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) 1800 °F (982 °C) Solution Heat-Treated, Precipitation-Hardenable
    28/09/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • BS EN 3628:2023

    Aerospace series. Lockwire, drawn. Corrosion resisting steel
    26/09/2023 - PDF - Anglais - BSI
    En savoir plus
    151,00 €

  • SAE AMS 5703F:2023-08-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Forging 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
    22/08/2023 - PDF - Anglais - SAE
    En savoir plus
    79,00 €

  • SAE AMS 5701G:2023-08-21

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Flash Welded Rings and Forging Stock 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
    21/08/2023 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 1424S:2023-07-03

    Fluid, Aircraft Deicing/Anti-Icing, SAE Type I
    03/07/2023 - PDF - Anglais - SAE
    En savoir plus
    101,00 €

  • SAE AMS 2224H:2023-06-13

    Tolerances Copper and Copper Alloy Wire
    13/06/2023 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5768M:2023-06-12

    Alloy, Corrosion and Heat-Resistant, Bars, Wire, Forgings, Rings and Stock for Forgings, Rings and Heading 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N - 31Fe Solution and Precipitation Heat Treated
    12/06/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5665R:2023-05-30

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Forgings and Rings 74Ni - 15.5Cr - 8.0Fe
    30/05/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 2667H:2023-05-24

    Brazing, Silver, for Small Pressurized Fittings
    24/05/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5596N:2023-05-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
    22/05/2023 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 2665J:2023-05-17

    Brazing, Silver for Use up to 400 °F (204 °C)
    17/05/2023 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 2222L:2023-05-10

    Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
    10/05/2023 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 3040E:2023-05-10

    Magnetic Particles, Nonfluorescent Dry Method
    10/05/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 3043F:2023-05-10

    Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
    10/05/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5540R:2023-05-10

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
    10/05/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • BS EN 4374:2022

    Aerospace series. Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3). Solution treated and precipitation treated. Bars and sections. De = 200 mm
    30/03/2023 - PDF - Anglais - BSI
    En savoir plus
    151,00 €

  • SAE AMS 5707P:2023-03-23

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
    23/03/2023 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 4633C:2023-03-08

    Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)
    08/03/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • ASTM D5972-23

    Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
    01/03/2023 - PDF - Anglais - ASTM
    En savoir plus
    54,00 €

  • ASTM D5972-23 + Redline

    Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
    01/03/2023 - PDF - Anglais - ASTM
    En savoir plus
    65,00 €

  • DIN EN 4374:2023-03

    Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - D<(Index)e> 200 mm, German and English version EN 4374:2022
    01/03/2023 - PDF - Anglais, Allemand - DIN
    En savoir plus
    59,63 €

  • SAE AMS 3041G:2023-02-20

    Magnetic Particles, Nonfluorescent Wet Method, Oil Vehicle, Ready-to-Use
    20/02/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5604K:2023-02-20

    Steel, Corrosion Resistant, Sheet, Strip, and Plate 16.5Cr - 4.0Ni - 4.0Cu - 0.30Cb Solution Heat Treated, Precipitation Hardenable
    20/02/2023 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 1428L:2023-02-14

    Fluid, Aircraft Deicing/Anti-Icing, Non-Newtonian (Pseudoplastic), SAE Types II, III, and IV
    14/02/2023 - PDF - Anglais - SAE
    En savoir plus
    120,00 €

  • SAE AMS 4625J:2023-02-14

    Phosphor Bronze Bars, Rods, and Tubing 95Cu - 5Sn Hard Temper
    14/02/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5537K:2023-02-06

    Cobalt Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil, and Plate 52Co - 20Cr - 10Ni - 15W Solution Heat Treated
    06/02/2023 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 2370M:2023-01-25

    Quality Assurance Sampling and Testing Carbon and Low-Alloy Steel Wrought Products and Forging Stock
    25/01/2023 - PDF - Anglais - SAE
    En savoir plus
    83,00 €

  • SAE AMS 2221H:2023-01-17

    Tolerances Copper and Copper Alloy Bars and Rods
    17/01/2023 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4763C:2023-01-17

    Silver Alloy, Brazing Filler Metal 56Ag - 22Cu - 17Zn - 5.0Sn 1145 to 1205 °F (618 to 652 °C) Solidus-Liquidus Range
    17/01/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4772L:2023-01-17

    Silver Alloy, Brazing Filler Metal 54Ag - 40Cu - 5.0Zn - 1.0Ni 1325 to 1575 °F (718 to 857 °C) Solidus-Liquidus Range
    17/01/2023 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AS 5528F:2023-01-17

    Lubricant Application, Solid Film, Heat Cured, Corrosion Inhibiting
    17/01/2023 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • NBN EN 4374:2022

    Luft- und Raumfahrt - Hochwarmfeste Legierung NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Lösungsgeglüht und ausscheidungsgehärtet - Stangen und Profile - De = 200 mm
    22/12/2022 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • NBN EN 4374:2022

    Série aérospatiale - Alliage résistant à chaud NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Mis en solution et précipité - Barres et profilés - De = 200 mm
    22/12/2022 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN EN 4374:2022

    Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De = 200 mm
    22/12/2022 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • SAE AMS 4779L:2022-12-16

    Nickel Alloy, Brazing Filler Metal 94Ni - 3.5Si - 1.8B 1800 °F (982 °C) Solidus, 1950 °F (1066 °C) Liquidus
    16/12/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4782H:2022-12-16

    Nickel Alloy, Brazing Filler Metal 71Ni - 10Si - 19Cr 1975 °F (1080 °C) Solidus, 2075 °F (1135 °C) Liquidus
    16/12/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • NF EN 4374, L10-735 (12/2022)

    Série aérospatiale - Alliage résistant à chaud NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Mis en solution et précipité - Barres et profilés - De inférieur ou égal à 200 mm
    01/12/2022 - Papier - Français - AFNOR
    En savoir plus
    48,00 €

  • ASTM D2532-22

    Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    01/12/2022 - PDF - Anglais - ASTM
    En savoir plus
    54,00 €

  • ASTM D2532-22 + Redline

    Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants
    01/12/2022 - PDF - Anglais - ASTM
    En savoir plus
    65,00 €

  • SAE AS 5502E:2022-11-14

    Standard Requirements for Aerospace Sealants and Adhesion Promoters
    14/11/2022 - PDF - Anglais - SAE
    En savoir plus
    83,00 €

  • SAE AMS 4553E:2022-11-02

    Brass, Seamless, Tubing 85Cu - 15Zn Annealed (O61)
    02/11/2022 - PDF - Anglais - SAE
    En savoir plus
    86,00 €

  • SAE AMS 4675F:2022-10-26

    Nickel-Copper Alloy, Corrosion-Resistant, Bars and Forgings 67Ni - 30Cu
    26/10/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 4730J:2022-10-26

    Nickel-Copper Alloy Wire, Corrosion-Resistant 67Ni - 31Cu Annealed (400)
    26/10/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4602E:2022-10-13

    Copper Bars, Rods, and Shapes Oxygen-Free, Hard Temper (H04)
    13/10/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4712H:2022-10-13

    Copper Alloy, Wire 65Cu - 35Zn Annealed (O61)
    13/10/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • UNE-EN 4374:2022

    Aerospace series - Heat-resisting alloy NI-PH1301 (NiCr19Co18Mo4Ti3Al3) - Solution treated and precipitation treated - Bars and sections - De = 200 mm
    12/10/2022 - PDF - Anglais - AENOR
    En savoir plus
    42,00 €

  • SAE AMS 4614J:2022-09-30

    Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
    30/09/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 2375F:2022-09-23

    Control of Forgings Requiring First Article Approval
    23/09/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 2269G:2022-09-14

    Chemical Check Analysis Limits Nickel, Nickel Alloys, and Cobalt Alloys
    14/09/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 4558J:2022-09-08

    Brass, Seamless Tubing 66.5Cu - 31.5Zn - 1.6Pb Drawn Temper (H58)
    08/09/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5786J:2022-09-08

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 62.5Ni - 5.0Cr - 24.5Mo - 5.5Fe
    08/09/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 5798J:2022-08-26

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18Fe
    26/08/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 5663P:2022-08-19

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Stock for Forgings and Rings, 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe, Consumable Electrode or Vacuum Induction Melted, 1775 °F (968 °C) Solution and Precipitation Heat Treated
    19/08/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 5664G:2022-08-17

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings and Rings 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated, Precipitation Hardenable
    17/08/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 3042G:2022-08-05

    Magnetic Particles, Nonfluorescent Wet Method, Dry Powder
    05/08/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • DIN EN 16602-70-80:2022-08

    Space product assurance - Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications, English version EN 16602-70-80:2021
    01/08/2022 - PDF - Anglais, Allemand - DIN
    En savoir plus
    169,25 €

  • SAE AMS 7851E:2022-07-26

    Columbium (Niobium) Alloy Foil, Sheet, Strip, and Plate 10W - 2.5Zr Recrystallized (Stabilized: Jul 2022)
    26/07/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 7855E:2022-07-26

    Columbium (Niobium) Alloy Bars, Rods, and Wire 10W - 2.5Zr Recrystallized (Stabilized: Jul 2022)
    26/07/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5666K:2022-07-08

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Extrusions, Rings, and Stock for Forgings, Extrusions, and Rings 62Ni - 21.5Cr - 9.0Mo - 3.65Cb (Nb) Annealed
    08/07/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 5608H:2022-07-06

    Cobalt Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated
    06/07/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • DIN EN 4385:2022-07

    Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards, German and English version EN 4385:2022
    01/07/2022 - PDF - Anglais, Allemand - DIN
    En savoir plus
    59,63 €

  • DIN EN 4387:2022-07

    Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications, German and English version EN 4387:2022
    01/07/2022 - PDF - Anglais, Allemand - DIN
    En savoir plus
    92,62 €

  • DIN EN 4866:2022-07

    Aerospace series - Definitions of imperfections and defects in organic matrix composite materials, German and English version EN 4866:2021
    01/07/2022 - PDF - Anglais, Allemand - DIN
    En savoir plus
    141,96 €

  • SAE AMS 2750G:2022-06-29

    Pyrometry
    29/06/2022 - PDF - Anglais - SAE
    En savoir plus
    143,00 €

  • SAE AMS 2634C:2022-06-20

    Ultrasonic Inspection Thin Wall Metal Tubing
    20/06/2022 - PDF - Anglais - SAE
    En savoir plus
    96,00 €

  • SAE AMS 2670K:2022-06-20

    Brazing, Copper
    20/06/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 4720J:2022-06-20

    Wire, Phosphor Bronze 94Cu - 5.0Sn - 0.19P Cold Drawn, Spring Temper (H08)
    20/06/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5581G:2022-06-20

    Nickel Alloy, Corrosion- and Heat-Resistant, Seamless or Welded Tubing 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Annealed
    20/06/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • 22/30457311 DC:2022

    BS EN 2302. Aerospace series. Heat resisting nickel base alloy NiCr20Co3Fe3 - Rm = 650 MPa. Sheets and strips, cold rolled. 0,25 mm < a = 3 mm
    16/06/2022 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • SAE AMS 2632C:2022-06-02

    Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 mm) and Under in Cross-Sectional Thickness
    02/06/2022 - PDF - Anglais - SAE
    En savoir plus
    113,00 €

  • SAE AMS 5746G:2022-06-02

    Alloy, Corrosion- and Heat-Resistant, Bars and Forgings 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al - 31Fe (D979) Consumable Electrode Vacuum Melted Solution and Precipitation Heat Treated (Stabilized: Jun 2022)
    02/06/2022 - PDF - Anglais - SAE
    En savoir plus
    83,00 €

  • SAE AMS 5814D:2022-06-02

    Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted (Stabilized: Jun 2022)
    02/06/2022 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 5829F:2022-06-02

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vacuum Induction Melted (Stabilized: Jun 2022)
    02/06/2022 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • UNE-EN 4387:2022

    Aerospace series - Non-metallic materials - Rules for drafting and presentation of technical specifications (Endorsed by Asociación Española de Normalización in June of 2022.)
    01/06/2022 - PDF - Anglais - AENOR
    En savoir plus
    66,00 €

  • UNE-EN 4385:2022

    Aerospace series - Non-metallic materials - General organization of standardization - Links between types of standards (Endorsed by Asociación Española de Normalización in June of 2022.)
    01/06/2022 - PDF - Anglais - AENOR
    En savoir plus
    38,00 €

  • BS EN 4387:2022

    Aerospace series. Non-metallic materials. Rules for drafting and presentation of technical specifications
    17/05/2022 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • SAE AMS 4535E:2022-05-16

    Copper-Beryllium Alloy, Mechanical Tubing 98Cu - 1.9Be Solution and Precipitation Heat Treated (TF00, formerly AT)
    16/05/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5679J:2022-05-16

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 73Ni - 15.5Cr - 2.2Cb - 8.0Fe
    16/05/2022 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5698H:2022-05-16

    Nickel Alloy, Corrosion- and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable
    16/05/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5699H:2022-05-16

    Nickel Alloy, Corrosion and Heat-Resistant, Wire 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Solution Heat Treated, Precipitation Hardenable
    16/05/2022 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 5871G:2022-05-16

    Iron-Nickel-Chromium Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated
    16/05/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • BS EN 4385:2022

    Aerospace series. Non-metallic materials. General organization of standardization. Links between types of standards
    13/05/2022 - PDF - Anglais - BSI
    En savoir plus
    151,00 €

  • NBN EN 4385:2022

    Série aérospatiale - Matériaux non métalliques - Organisation générale de la normalisation - Liens entre les types de normes
    07/05/2022 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN EN 4385:2022

    Série aérospatiale - Matériaux non métalliques - Organisation générale de la normalisation - Liens entre les types de normes
    07/05/2022 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • NBN EN 4385:2022

    Série aérospatiale - Matériaux non métalliques - Organisation générale de la normalisation - Liens entre les types de normes
    07/05/2022 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • ASTM D6790/D6790M-22

    Standard Test Method for Determining Poisson&apos,s Ratio of Honeycomb Cores
    01/05/2022 - PDF - Anglais - ASTM
    En savoir plus
    46,00 €

  • ASTM D6790/D6790M-22 + Redline

    Standard Test Method for Determining Poisson&apos,s Ratio of Honeycomb Cores
    01/05/2022 - PDF - Anglais - ASTM
    En savoir plus
    53,00 €

  • NBN EN 4387:2022

    Série aérospatiale - Matériaux non-métalliques - Règles pour la rédaction et la présentation des spécifications techniques
    30/04/2022 - PDF - Français - NBN
    En savoir plus
    121,00 €

  • NBN EN 4387:2022

    Série aérospatiale - Matériaux non-métalliques - Règles pour la rédaction et la présentation des spécifications techniques
    30/04/2022 - PDF - Allemand - NBN
    En savoir plus
    121,00 €

  • NBN EN 4387:2022

    Série aérospatiale - Matériaux non-métalliques - Règles pour la rédaction et la présentation des spécifications techniques
    30/04/2022 - PDF - Anglais - NBN
    En savoir plus
    121,00 €

  • 22/30454739 DC:2022

    BS EN 3628. Aerospace series. Lockwire, drawn. Corrosion resisting steel
    28/04/2022 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS EN 16602-70-80:2021

    Space product assurance. Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications
    26/04/2022 - PDF - Anglais - BSI
    En savoir plus
    377,00 €

  • SAE AMS 5889D:2022-04-14

    Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
    14/04/2022 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5894E:2022-04-13

    Cobalt Alloys, Bars, Sheet, and Plate 60Co - 28Cr - 4.5W - 1.15C Solution Heat Treated
    13/04/2022 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5597H:2022-04-05

    Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
    05/04/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 2451/4E:2022-03-29

    Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
    29/03/2022 - PDF - Anglais - SAE
    En savoir plus
    47,00 €

  • SAE AMS 5387F:2022-02-02

    Alloy, Corrosion and Heat Resistant, Investment Castings 60Co - 29Cr - 4.5W As Cast
    02/02/2022 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • UNE-EN 16602-70-80:2021

    Space product assurance - Processing and quality assurance requirements for metallic powder bed fusion technologies for space applications (Endorsed by Asociación Española de Normalización in February of 2022.)
    01/02/2022 - PDF - Anglais - AENOR
    En savoir plus
    113,00 €

  • NBN EN 16602-70-80:2021

    Assurance produit des projets spatiaux - Exigences de traitement et d'assurance qualité pour les technologies de fusion sur lit de poudre métallique pour applications spatiales
    24/12/2021 - PDF - Français - NBN
    En savoir plus
    184,00 €

  • NBN EN 16602-70-80:2021

    Assurance produit des projets spatiaux - Exigences de traitement et d'assurance qualité pour les technologies de fusion sur lit de poudre métallique pour applications spatiales
    24/12/2021 - PDF - Anglais - NBN
    En savoir plus
    184,00 €

  • SAE AMS 5831E:2021-12-15

    Iron-Nickel-Chromium-Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 29Fe - 22Cr - 21Ni - 18.5Co - 3.2Mo - 2.8W - 0.78Ta - 0.30Al - 0.05Zr - 0.05La - 0.20N
    15/12/2021 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5839D:2021-12-15

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 59Ni - 22Cr - 2.0Mo - 14W - 0.35Al
    15/12/2021 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 4590D:2021-12-01

    Extrusions, Nickel-Aluminum Bronze, Martensitic 78.5Cu – 10.5Al – 5.1Ni – 4.8Fe Quenched and Tempered (TQ50)
    01/12/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 2630E:2021-11-09

    Inspection, Ultrasonic Product Over 0.5 Inch (12.7 mm) Thick
    09/11/2021 - PDF - Anglais - SAE
    En savoir plus
    111,00 €

  • SAE AMS 5585J:2021-11-09

    Steel Alloy, Corrosion and Heat Resistant, Welded Tubing 32Fe - 21Cr - 20Ni - 20Co - 3Mo - 2.5W - 1.0Cb (Nb) - 0.15N Solution Heat Treated
    09/11/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5587G:2021-11-09

    Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated
    09/11/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4507J:2021-10-28

    Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Half Hard (H02)
    28/10/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5887E:2021-10-28

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, Rings, and Forging or Ring Stock 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
    28/10/2021 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5836E:2021-10-19

    Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 72Ni - 3.0Mn - 20Cr - 2.5Cb(Nb)
    19/10/2021 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5778K:2021-10-18

    Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 72Ni - 15.5Cr - 1.0Cb(Nb) - 2.4Ti - 0.70Al - 7.0Fe
    18/10/2021 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5832J:2021-10-18

    Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 52.5Ni - 19Cr - 3.0Mo - 5.1Cb(Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted
    18/10/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 7882D:2021-10-01

    Tungsten Carbide-Cobalt Chrome Powder Agglomerated and Sintered
    01/10/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5593H:2021-09-21

    Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 45.5Ni - 25.5Cr - 3.2Co - 3.2Mo - 3.2W - 18.5Fe Solution Heat Treated
    21/09/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5759N:2021-09-10

    Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forging Stock, Forgings, and Rings 52Co - 20Cr - 10Ni - 15W
    10/09/2021 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • SAE AMS 4761C:2021-09-01

    Silver Alloy, Brazing Filler Metal 38Ag - 32Cu - 28Zn - 2.0Sn 1200 to 1330 °F (649 to 721 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4762C:2021-09-01

    Silver Alloy, Brazing Filler Metal 40Ag - 30Cu - 30Zn 1245 to 1340 °F (674 to 727 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 4765G:2021-09-01

    Silver Alloy, Brazing Filler Metal 56Ag – 42Cu – 2.0Ni 1420 to 1640 °F (771 to 893 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4766J:2021-09-01

    Silver Alloy, Brazing Filler Metal 85Ag - 15Mn 1760 to 1780 °F (960 to 971 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 4767H:2021-09-01

    Silver Alloy, Brazing Filler Metal 92.5Ag - 7.2Cu - 0.22Li 1435 to 1635 °F (779 to 891 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4773H:2021-09-01

    Silver Alloy, Brazing Filler Metal 60Ag - 30Cu - 10Sn 1115 to 1325 °F (602 to 718 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4774H:2021-09-01

    Silver Alloy Brazing Filler Metal 63Ag - 28.5Cu - 6.0Sn - 2.5Ni 1275 to 1475 °F (691 to 802 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4788C:2021-09-01

    Silver Alloy Brazing Filler Metal 50Ag - 28Zn - 20Cu - 2.0Ni 1220 to 1305 °F (660 to 707 °C) Solidus-Liquidus Range
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5772F:2021-09-01

    Cobalt Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated
    01/09/2021 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 4786K:2021-08-27

    Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 70Au - 8.0Pd - 22Ni 1845 to 1915 °F (1007 to 1046 °C) Solidus-Liquidus Range
    27/08/2021 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 4785K:2021-08-26

    Gold-Palladium-Nickel Alloy, Brazing Filler Metal, High Temperature 30Au - 34Pd - 36Ni 2075 to 2130 °F (1135 to 1166 °C) Solidus-Liquidus Range
    26/08/2021 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5879E:2021-08-19

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Foil 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) Cold Rolled and Annealed
    19/08/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5766F:2021-07-23

    Alloy, Corrosion and Heat-Resistant, Bars and Forgings 21Cr - 32.5Ni - 0.38Ti - 0.38Al - 45Fe Solution Heat Treated
    23/07/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5675J:2021-07-19

    Nickel Alloy, Corrosion and Heat Resistant, Welding Wire 70Ni - 2.5Mn - 15.5Cr - 3.0Ti - 7.0Fe
    19/07/2021 - PDF - Anglais - SAE
    En savoir plus
    54,00 €

  • SAE AMS 5888D:2021-07-19

    Nickel Alloy, Corrosion and Heat-Resistant, Plate 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Annealed
    19/07/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE ARP 1331C:2021-07-15

    The Chemical Milling Process
    15/07/2021 - PDF - Anglais - SAE
    En savoir plus
    89,00 €

  • SAE AMS 4635H:2021-07-07

    Aluminum Bronze Bars, Rods, and Forgings 87Cu - 9Al - 3Fe Stress Relieved
    07/07/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4783H:2021-07-07

    Cobalt Alloy, High Temperature Brazing Filler Metal 50Co - 8.0Si - 19Cr - 17Ni - 4.0W - 0.80B 2050 to 2100 °F (1121 to 1149 °C) Solidus-Liquidus Range
    07/07/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5397F:2021-06-10

    Nickel Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast
    10/06/2021 - PDF - Anglais - SAE
    En savoir plus
    83,00 €

  • SAE AMS 4780H:2021-06-01

    Manganese Alloy, Brazing Filler Metal 66Mn - 16Ni - 16Co - 0.80B 1770 to 1875 °F (966 to 1024 °C) Solidus-Liquidus Range
    01/06/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS-C-19853A:2021-05-21

    Carbon Removing Compound (For Use in Agitated Tank) (Stabilized: May 2021)
    21/05/2021 - PDF - Anglais - SAE
    En savoir plus
    107,00 €

  • SAE AMS 3670/1C:2021-05-19

    Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
    19/05/2021 - PDF - Anglais - SAE
    En savoir plus
    47,00 €

  • SAE AMS 3670/1C:2021-05-19

    Bars, Rods, and Shapes Produced from Unfilled Polyamide-Imide (PAI) Material
    19/05/2021 - PDF - Anglais - SAE
    En savoir plus
    81,00 €

  • SAE AMS 5791D:2021-05-19

    Cobalt Alloy, Powder, Plasma Spray 56.5Co - 25.5Cr - 10.5Ni - 7.5W
    19/05/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4520M:2021-04-28

    Leaded Phosphor Bronze Strip 88.5Cu - 4.0Sn - 4.0Pb - 3.0Zn - 0.26P Cold Rolled, Half Hard (H02)
    28/04/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4534E:2021-04-22

    Copper-Beryllium Alloy, Bars and Rods 98Cu - 1.9Be Solution Heat Treated, Cold Worked, and Precipitation Heat Treated (TH04, formerly HT)
    22/04/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4555L:2021-04-22

    Leaded Brass, Seamless Tubing 66.5Cu - 32.5Zn - 0.48Pb Light Annealed (O50)
    22/04/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 4731D:2021-04-06

    Nickel-Copper Alloy Wire and Ribbon, Corrosion-Resistant 67Ni - 31Cu Annealed
    06/04/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AS 5272F:2021-04-05

    Lubricant, Solid Film, Heat Cured, Corrosion Inhibiting, Procurement Specification
    05/04/2021 - PDF - Anglais - SAE
    En savoir plus
    96,00 €

  • 21/30432944 DC:2021

    BS EN 4876. Aerospace series. Environmental testing. Durability of the displays by general usage
    01/04/2021 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • SAE AMS 5869D:2021-03-05

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 62Ni - 21.5Cr - 9.0Mo - 3.7Cb Solution Heat Treated
    05/03/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • 21/30431258 DC:2021

    BS EN 2002-001. Aerospace series. Metallic materials. Test methods Part 001. Tensile testing at ambient temperature
    28/01/2021 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • SAE AMS 5794F:2021-01-26

    Iron Alloy, Corrosion and Heat-Resistant, Welding Wire, 31Fe - 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0Cb - 0.15N, Annealed
    26/01/2021 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4510J:2021-01-20

    Phosphor Bronze, Sheet, Strip, and Plate 94.5Cu - 4.0Sn - 0.19P Spring Temper (H08)
    20/01/2021 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5950D:2020-12-29

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet and Strip 52.5Ni - 19Cr - 3.0Mo - 5.0Cb - 0.90Ti - 0.50Al - 18Fe Vacuum Induction and Consumable Electrode Melted Solution Heat Treated, Precipitation Hardenable
    29/12/2020 - PDF - Anglais - SAE
    En savoir plus
    79,00 €

  • SAE AMS 2774G:2020-12-10

    Heat Treatment Nickel Alloy and Cobalt Alloy Parts
    10/12/2020 - PDF - Anglais - SAE
    En savoir plus
    124,00 €

  • SAE AMS 7725F:2020-11-12

    Tungsten Heavy Alloy Shapes, Sintered, High Density
    12/11/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 2641D:2020-10-09

    Vehicle, Magnetic Particle Inspection Petroleum Base
    09/10/2020 - PDF - Anglais - SAE
    En savoir plus
    87,00 €

  • DIN 17024-2:2020-10

    Additive manufacturing - Process characteristics and performance - Part 2: Directed energy deposition using wire and arc in aerospace applications
    01/10/2020 - PDF - Allemand - DIN
    En savoir plus
    59,63 €

  • SAE AMS 5878E:2020-08-26

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 59Ni - 22Cr - 2Mo - 14W - 0.35Al - 0.03La Solution Heat Treated
    26/08/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 4634D:2020-08-20

    Aluminum Bronze Bars, Rods, and Forgings 90.5Cu - 7.5Al - 1.9Si Stress Relieved
    20/08/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5667P:2020-08-04

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Equalized, Precipitation Hardenable
    04/08/2020 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5706N:2020-08-04

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.006B - 0.05Zr Consumable Electrode or Vacuum Induction Melted 1825 to 1900 °F Solution Heat Treated
    04/08/2020 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 1384B:2020-07-24

    Acid, Inhibited Phosphoric Aircraft Turbine Engine Components Room Temperature Application (Stabilized: Jul 2020)
    24/07/2020 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5544L:2020-07-14

    Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed
    14/07/2020 - PDF - Anglais - SAE
    En savoir plus
    75,00 €

  • SAE AMS 5711F:2020-07-14

    Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Solution Heat Treated
    14/07/2020 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5873G:2020-07-14

    Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 65Ni - 15.8Cr - 15.2Mo - 0.30Al - 0.05La Consumable Electrode Remelted, Solution Heat Treated
    14/07/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 5660M:2020-06-15

    Nickel-Iron Alloy, Corrosion and Heat-Resistant, Bars and Forgings 12.5Cr - 42.5Ni - 6.0Mo - 2.7Ti - 0.015B - 34Fe Consumable Electrode Remelted or Vacuum Induction Melted Solution, Stabilization, and Precipitation Heat Treated
    15/06/2020 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • BS EN 7010:2020

    Aerospace series. Configuration. Definition and designation for product standards for externally threaded fasteners
    19/05/2020 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • SAE AMS 7881B:2020-05-06

    Tungsten Carbide-Cobalt Powder Agglomerated and Sintered
    06/05/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • DIN EN 4244:2020-05

    Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D 200 mm - 1 000 MPa R<(Index)m> 1 140 MPa, German and English version EN 4244:2020
    01/05/2020 - PDF - Anglais, Allemand - DIN
    En savoir plus
    59,63 €

  • DIN EN 4245:2020-05

    Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - As forged - Forging stock - D<(Index)e> 300 mm, German and English version EN 4245:2020
    01/05/2020 - PDF - Anglais, Allemand - DIN
    En savoir plus
    59,63 €

  • SAE AMS 5789E:2020-04-21

    Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 54Co - 25.5Cr - 10.5Ni - 7.5W
    21/04/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • SAE AMS 7879G:2020-04-21

    Tungsten Carbide-Cobalt Powder
    21/04/2020 - PDF - Anglais - SAE
    En savoir plus
    60,00 €

  • SAE AMS 5886D:2020-04-10

    Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 50Ni - 20Cr - 20Co - 5.8Mo - 2.2Ti - 0.45Al Consumable Electrode or Vacuum Induction Melted 2100 °F (1149 °C) Solution Heat Treated
    10/04/2020 - PDF - Anglais - SAE
    En savoir plus
    70,00 €

  • SAE AMS 5769G:2020-04-02

    Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings, 21Cr - 20Ni - 20Co - 3.0Mo - 2.5W - 1.0(Cb+Ta) - 0.15N - 32Fe Solution Heat Treated
    02/04/2020 - PDF - Anglais - SAE
    En savoir plus
    66,00 €

  • DIN EN 3219:2020-04

    Aerospace series - Heat resisting nickel base alloy (NI-P100HT) - Cold worked and softened - Bar and wire for continuous forging or extrusion for fasteners - 3 mm D 30 mm, German and English version EN 3219:2020
    01/04/2020 - PDF - Anglais, Allemand - DIN
    En savoir plus
    59,63 €

  • UNE-EN 4244:2020

    Aerospace series - Heat resisting alloy FE-PM1708 - Vacuum arc remelted - Hardened and tempered - Bars - a or D = 200 mm - 1 000 MPa = Rm = 1 140 MPa
    01/04/2020 - PDF - Anglais - AENOR
    En savoir plus
    38,00 €

Total des articles 1 à 200 de 1160

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6