25 : Techniques de fabrication
-
NBN ISO 11124-6:2025
Préparation de subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications pour abrasifs métalliques destinés à la préparation par projection — Partie 6: Acier inoxydable (grenaille et irréguliers)
04/11/2025 - PDF - Anglais - NBN
En savoir plus40,00 € -
DIN EN ISO 8501-3:2025-11
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2025), German version EN ISO 8501-3:2025
01/11/2025 - PDF - Allemand - DIN
En savoir plus82,15 € -
DIN EN ISO 8207:2025-11
Gas welding equipment - Specification for hose assemblies for equipment for welding, cutting and allied processes (ISO/DIS 8207:2025), German and English version prEN ISO 8207:2025
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus61,40 € -
DIN 54188:2025-11
Non-destructive testing - Testing of welded joints using active thermography - Methods of inductive and laser-excited thermography
01/11/2025 - PDF - Allemand - DIN
En savoir plus108,13 € -
DIN EN ISO 4531:2025-11
Vitreous and porcelain enamels - Release from enamelled articles in contact with food - Methods of test and limits (ISO/DIS 4531:2025), German and English version prEN ISO 4531:2025
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus74,95 € -
DIN EN ISO 11177:2025-11
Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO/DIS 11177:2025), German and English version prEN ISO 11177:2025
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus54,49 € -
61,40 €
-
DIN ISO 21949:2025-11
Coated abrasives - Plain sheets with holes for dust extraction (ISO 21949:2024), Text in German and English
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus47,38 € -
DIN ISO 21951:2025-11
Coated abrasives - Plain discs with holes for dust extraction (ISO 21951:2024), Text in German and English
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus40,56 € -
DIN 17022-3:2025-11
Heat treatment of ferrous materials - Heat treatment methods - Part 3: Case hardening
01/11/2025 - PDF - Allemand - DIN
En savoir plus130,09 € -
DIN EN ISO 4885:2025-11
Ferrous materials - Heat treatments - Vocabulary (ISO/DIS 4885:2025), German and English version prEN ISO 4885:2025
01/11/2025 - PDF - Anglais, Allemand - DIN
En savoir plus179,63 € -
BS EN ISO 15608:2025 + Redline
Tracked Changes. Welding. Grouping system for metallic materials
31/10/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
ISO/DIS 23247-5:2025
Automation systems and integration — Digital twin framework for manufacturing
30/10/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
UNE-EN ISO 14343:2025
Welding consumables - Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels - Classification (ISO 14343:2025)
29/10/2025 - - - AENOR
En savoir plusDe: 77,00 € -
25/30512895 DC:2025
BS 14300. Safe use of machinery. Vision panel inspection and replacement
27/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 21423:2025
Robotics — Industrial mobile robots — Communications and interoperability
24/10/2025 - - - ISO
En savoir plus75,00 € -
ISO/DIS 25164:2025
Physical vapor deposition coatings — Magnetron sputtering deposition of TiAlSiN thin films — Specification
24/10/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
25/30495193 DC:2025
BS ISO 25164 Physical vapor deposition coatings — Magnetron sputtering deposition of TiAlSiN thin films — Specification
24/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30545785 DC:2025
Draft BS EN IEC 62443-2-4 Security for industrial automation and control systems Part 2-4: program requirements IACS service providers
24/10/2025 - PDF - Anglais - BSI
En savoir plus44,00 € -
NBN EN ISO 15608:2025
Welding - Grouping system for metallic materials (ISO 15608:2025)
23/10/2025 - - - NBN
En savoir plus58,00 € -
162,00 €
-
PD CEN ISO/ASTM TR 52913-1:2025
Additive manufacturing. Feedstock materials Guidelines for the selection of measurement methods characterization powder flow properties
22/10/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
UNE-EN ISO 8502-15:2025
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid extraction (ISO 8502-15:2020)
22/10/2025 - - - AENOR
En savoir plusDe: 69,00 € -
UNE-EN ISO 23779:2025
Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024)
22/10/2025 - - - AENOR
En savoir plusDe: 96,00 € -
NBN ISO 14306-3:2025
Systèmes d'automatisation industrielle et intégration — Spécification de format de fichier JT pour visualisation 3D — Partie 3: Titre manque
21/10/2025 - PDF - Anglais - NBN
En savoir plus208,00 € -
92,00 €
-
NBN ISO 24251-1:2025
Prévention de la fragilisation par l'hydrogène des pièces en acier à haute résistance — Partie 1: Principes fondamentaux et mesures
17/10/2025 - PDF - Anglais - NBN
En savoir plus124,00 € -
25/30547565 DC:2025
BS EN IEC 62841-3-17:2025/AA Electric motor-operated hand-held tools, transportable tools and lawn garden machinery - Safety Part 3-17: Particular requirements for table masonry saws
17/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30545779 DC:2025
BS EN IEC 62443-4-1 Security for industrial automation and control systems Part 4-1: Secure product development lifecycle requirements
17/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
BS EN ISO 15613:2025 + Redline
Tracked Changes. Specification and qualification of welding procedures for metallic materials. Qualification based on a pre-production welding test
16/10/2025 - PDF - Anglais - BSI
En savoir plus269,00 € -
CEN ISO/ASTM TR 52913-1:2025
Additive manufacturing - Feedstock materials - Part 1: Guidelines for the selection of measurement methods for characterization of powder flow properties (ISO/ASTM TR 52913-1:2025)
16/10/2025 - PDF - Anglais - NBN
En savoir plus89,00 € -
NBN EN ISO/ASTM 52929:2025
Additive manufacturing of metals - Powder bed fusion - Presentation of material properties in material data sheets (ISO/ASTM 52929:2025)
16/10/2025 - - - NBN
En savoir plus92,00 € -
BS EN ISO/ASTM 52929:2025
Additive manufacturing of metals. Powder bed fusion. Presentation of material properties in material data sheets
16/10/2025 - PDF - Anglais - BSI
En savoir plus266,00 € -
BS EN ISO 3210:2025 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
16/10/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
25/30498932 DC:2025
BS ISO 25245 Peel strength of metallic coatings on plastics — Designation and test method under controlled temperatures
16/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 25245:2025
Peel strength of metallic coatings on plastics — Designation and test method under controlled temperatures
16/10/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
UNE-EN ISO 8504-4:2025
Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 4: Acid pickling (ISO 8504-4:2022)
15/10/2025 - - - AENOR
En savoir plusDe: 64,00 € -
25/30510355 DC:2025
Draft BS EN 63270-2 Industrial automation equipment and systems Part 2: Algorithm Verification Methods
14/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
BS IEC 63082-1:2025 + Redline
Tracked Changes. Intelligent device management Part 1: Concepts and terminology
14/10/2025 - PDF - Anglais - BSI
En savoir plus559,00 € -
ISO/DIS 8207:2025
Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes
13/10/2025 - - - ISO
En savoir plus75,00 € -
25/30497275 DC:2025
BS ISO 8207 Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes
13/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
312,00 €
-
25/30479664 DC:2025
BS EN ISO 4885 Ferrous materials — Heat treatments — Vocabulary
10/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
75,00 €
-
BS EN ISO 15613:2025
Specification and qualification of welding procedures for metallic materials. Qualification based on a pre-production welding test
09/10/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
BS EN ISO 3210:2025
Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
09/10/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
NBN EN ISO 3210:2025
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2025)
09/10/2025 - - - NBN
En savoir plus89,00 € -
BS EN IEC 60127-9:2025
Miniature fuses fuse-links for special applications with partial-range breaking capacity
08/10/2025 - PDF - Anglais - BSI
En savoir plus312,00 € -
ISO/DIS 11124-1:2025
Preparation of steel substrates before application of paints and related products — Specifications for metallic blast-cleaning abrasives
07/10/2025 - - - ISO
En savoir plus75,00 € -
25/30509402 DC:2025
BS EN ISO 11124-1 Preparation of steel substrates before application paints and related products — Specifications for metallic blast-cleaning abrasives Part 1: General introduction classification
07/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
ISO/DIS 4531:2025
Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
07/10/2025 - - - ISO
En savoir plus75,00 € -
ISO/DIS 11177:2025
Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
07/10/2025 - - - ISO
En savoir plus75,00 € -
25/30509629 DC:2025
BS EN ISO 11177 Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
07/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30509633 DC:2025
BS EN ISO 4531 Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits
07/10/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO 15614-11:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test
03/10/2025 - - - ISO
En savoir plus152,00 € -
ISO/ASTM 52929:2025
Additive manufacturing of metals — Powder bed fusion — Presentation of material properties in material data sheets
03/10/2025 - - - ISO
En savoir plus113,00 € -
BS IEC 63082-1:2025
Intelligent device management Part 1: Concepts and terminology
02/10/2025 - PDF - Anglais - BSI
En savoir plus399,00 € -
NF ISO 11901-2, E63-131-2 (10/2025)
Outillage de presse - Ressorts à gaz - Partie 2 : spécifications des accessoires
01/10/2025 - PDF - Français - AFNOR
En savoir plus78,00 € -
DIN EN ISO 15614-1:2025-10
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO/DIS 15614-1:2025), German and English version prEN ISO 15614-1:2025
01/10/2025 - PDF - Anglais, Allemand - DIN
En savoir plus130,09 € -
DIN EN ISO 11124-1:2025-10
Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO/DIS 11124-1:2025), German and English version prEN ISO 11124-1:2025
01/10/2025 - PDF - Anglais, Allemand - DIN
En savoir plus61,40 € -
PR NF EN IEC 60519-4/A1 (10/2025)
Amendement 1 - Sécurité dans les installations destinées au traitement électrothermique et électromagnétique - Partie 4 : exigences particulières pour les installations de fours à arc
01/10/2025 - PDF - Français - AFNOR
En savoir plus19,50 € -
DIN EN ISO/ASTM 52922:2025-10
Additive manufacturing - Design - Directed energy deposition of metals (ISO/ASTM DIS 52922:2025), German and English version prEN ISO/ASTM 52922:2025
01/10/2025 - PDF - Anglais, Allemand - DIN
En savoir plus124,49 € -
PR NF EN ISO/ASTM 52966, T31-103 (10/2025)
Fabrication additive - Principes de qualification - Cadre pour la catégorisation des ressources et capacités de traitement
01/10/2025 - PDF - Français - AFNOR
En savoir plus66,50 € -
DIN EN ISO 5821:2025-10
Resistance welding - Spot welding electrodes - Female electrode caps (ISO 5821:2025), German version EN ISO 5821:2025
01/10/2025 - PDF - Allemand - DIN
En savoir plus74,95 € -
DIN EN ISO 18275:2025-10
Welding consumables - Covered electrodes for manual metal arc welding of high-strength steels - Classification (ISO/DIS 18275:2025), German and English version prEN ISO 18275:2025
01/10/2025 - PDF - Anglais, Allemand - DIN
En savoir plus108,13 € -
ISO 3210:2025
Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
01/10/2025 - - - ISO
En savoir plus75,00 € -
DIN EN ISO 1456:2025-10
Metallic and other inorganic coatings - Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium (ISO/DIS 1456:2025), German and English version prEN ISO 1456:2025
01/10/2025 - PDF - Anglais, Allemand - DIN
En savoir plus108,13 € -
ASTM A917-25
Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
01/10/2025 - - - ASTM
En savoir plusDe: 58,00 € -
DIN EN 15895:2025-10
Powder actuated hand-held fixing and hard marking tools - Safety requirements, German version EN 15895:2025
01/10/2025 - PDF - Allemand - DIN
En savoir plus162,80 € -
DIN EN IEC 61987-100:2025-10
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 100: Data base standard for process measurement, control and automation equipment (IEC 61987-100:2025), German version EN IEC 61987-100:2025
01/10/2025 - PDF - Allemand - DIN
En savoir plus61,40 € -
DIN EN ISO 16089:2025-10
Machine tools - Safety - Stationary grinding machines (ISO 16089:2025), German version EN ISO 16089:2025
01/10/2025 - PDF - Allemand - DIN
En savoir plus254,11 € -
DIN ISO 21538:2025-10
Blanks for superabrasive cutting-off wheels - Mounting and fixing bores - Building construction and civil engineering (ISO 21538:2024)
01/10/2025 - PDF - Allemand - DIN
En savoir plus61,40 € -
DIN ISO 603-8:2025-10
Bonded abrasive products - Dimensions - Part 8: Grinding wheels for deburring and fettling/snagging on stationary machine (ISO 603-8:2024)
01/10/2025 - PDF - Allemand - DIN
En savoir plus40,56 € -
DIN ISO 603-9:2025-10
Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pressure grinding (ISO 603-9:2024)
01/10/2025 - PDF - Allemand - DIN
En savoir plus40,56 € -
ASTM B917/B917M-25
Standard Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
01/10/2025 - - - ASTM
En savoir plusDe: 72,00 € -
IEC 63082-1:2025
IEC 63082-1:2025 Intelligent device management - Part 1: Concepts and terminology
26/09/2025 - PDF - Anglais - IEC
En savoir plus476,00 € -
NBN EN ISO 15613:2025
Specification and qualification of welding procedures for metallic materials - Qualification based on a pre-production welding test (ISO 15613:2025)
25/09/2025 - - - NBN
En savoir plus40,00 € -
NBN EN ISO 15614-2:2025
Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 2: Arc welding of aluminium and its alloys (ISO 15614-2:2025)
25/09/2025 - - - NBN
En savoir plus58,00 € -
25/30489009 DC:2025
BS ISO 25116-1 Friction stir welding - Ferrous materials Part 1: Qualification of operators
25/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30489017 DC:2025
Draft BS EN ISO 25116-3 Friction stir welding - Steel Part 3: Quality and inspection requirements
24/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
25/30489013 DC:2025
BS EN ISO 25116-2 Friction stir welding. Steel Part 2. Specification and qualification of welding procedures
24/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30489025 DC:2025
Draft BS EN ISO 25116-3 Friction stir welding - Steel Part 3: Quality and inspection requirements
24/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
UNE-EN ISO 11127-8:2025
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 8: Field determination of water-soluble chlorides (ISO 11127-8:2020)
24/09/2025 - - - AENOR
En savoir plusDe: 54,00 € -
75,00 €
-
75,00 €
-
25/30479879 DC:2025
BS ISO 22627. Ships and marine technology-Painting technical requirements for accommodation interior of passenger ship
23/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 22627:2025
Ships and marine technology-Painting technical requirements for accommodation interior of passenger ship
23/09/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
BS ISO 5092:2025
Additive manufacturing for medical. General principles. Additive manufacturing of non-active implants
23/09/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
25/30497921 DC:2025
BS EN ISO 15614-1 Specification and qualification of welding procedures for metallic materials — Welding procedure test Part 1: Arc gas steels arc nickel alloys
22/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 15614-1:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test
22/09/2025 - - - ISO
En savoir plus75,00 € -
ISO 5092:2025
Additive manufacturing for medical — General principles — Additive manufacturing of non-active implants
22/09/2025 - - - ISO
En savoir plus75,00 € -
25/30502138 DC:2025
BS EN ISO 18275 Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
22/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 18275:2025
Welding consumables — Covered electrodes for manual metal arc welding of high-strength steels — Classification
22/09/2025 - - - ISO
En savoir plus75,00 € -
25/30545248 DC:2025
Drfat BS EN IEC 63439-2-1 Robotics for electricity generation, transmission and distribution systems Part 2-1: General Technical Requirements UAS Overhead Power Lines Inspection
22/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
NBN EN ISO 17662:2025
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2025)
18/09/2025 - - - NBN
En savoir plus145,00 € -
191,00 €
-
BS EN ISO 13916:2025 + Redline
Tracked Changes. Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
17/09/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
UNE-EN ISO 636:2025
Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2024)
17/09/2025 - - - AENOR
En savoir plusDe: 71,00 € -
ISO/DIS 21175-1:2025
Automation systems and integration --Collaboration Environment Requirements of Simulation on Different Manufacturing Platforms
17/09/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
PD IEC PAS 63595:2025
Industrial networks. 5G communication technology. General considerations
17/09/2025 - PDF - Anglais - BSI
En savoir plus399,00 € -
25/30540018 DC:2025
Draft BS EN IEC 63661 Procedure Automation for Continuous Process Operations
16/09/2025 - PDF - Anglais - BSI
En savoir plus44,00 € -
75,00 €
-
BS ISO 11901-2:2025 + Redline
Tracked Changes. Tools for pressing. Gas springs Specification of accessories
15/09/2025 - PDF - Anglais - BSI
En savoir plus269,00 € -
BS EN ISO/ASTM 52919:2025
Additive manufacturing. Qualification principles. Test methods for metal casting sand moulds
12/09/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
ISO/ASTM DIS 52922:2025
Additive manufacturing — Design — Directed energy deposition of metals
12/09/2025 - - - ISO
En savoir plus75,00 € -
25/30544820 DC:2025
BS EN ISO/ASTM 52922 Additive manufacturing — Design — Directed energy deposition of metals
12/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 12176-6:2025
Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène
12/09/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
25/30483035 DC:2025
BS EN ISO 1456 Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
12/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
25/30497485 DC:2025
BS ISO 6789-3 Assembly tools for screws and nuts - Hand torque Part 3: Requirements performance verification
12/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 1456:2025
Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium
12/09/2025 - - - ISO
En savoir plus75,00 € -
75,00 €
-
NBN EN ISO 17779:2025
Brazing - Specification and qualification of brazing procedures for metallic materials (ISO 17779:2021)
11/09/2025 - - - NBN
En savoir plus92,00 € -
ISO/ASTM DIS 52946:2025
Additive manufacturing of metals — Powder bed fusion — Material properties of stainless steel alloys
11/09/2025 - - - ISO
En savoir plus75,00 € -
NBN EN ISO/ASTM 52919:2025
Additive manufacturing - Qualification principles - Test methods for metal casting sand moulds (ISO/ASTM 52919:2025)
11/09/2025 - - - NBN
En savoir plus92,00 € -
266,00 €
-
25/30472131 DC:2025
BS ISO 13399-61 Cutting tool data representation and exchange Part 61: Company codes
10/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
75,00 €
-
IEC PAS 63595:2025
IEC PAS 63595:2025 Industrial networks - 5G communication technology - General considerations
10/09/2025 - PDF - Anglais - IEC
En savoir plus423,00 € -
BS ISO 11901-2:2025
Tools for pressing. Gas springs Specification of accessories
09/09/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
ISO 17662:2025
Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities
09/09/2025 - - - ISO
En savoir plus178,00 € -
25/30478495 DC:2025
BS ISO 21763 Guideline for Smart Manufacturing in Iron and Steel Industry
08/09/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 21763:2025
Lignes directrices pour la fabrication intelligente dans l'industrie sidérurgique
08/09/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
25/30531422 DC:2025
BS EN IEC 63187-1 Systems engineering – System safety Complex systems in defence programmes Part: 1 Concepts, terminology and requirements
05/09/2025 - PDF - Anglais - BSI
En savoir plus44,00 € -
113,00 €
-
BS EN ISO 13916:2025
Welding. Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
04/09/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
NBN EN ISO 13916:2025
Welding - Measurement of preheating temperature, interpass temperature and preheat maintenance temperature (ISO 13916:2025)
04/09/2025 - - - NBN
En savoir plus40,00 € -
NBN ISO 3151-2:2025
Éléments de visualisation pour l’échange de données entre systèmes d’information de gestion du cycle de vie de produits (PLM) et de pilotage de la production (MES) — Partie 2: Remontée d’informations d’erreur sous forme 3D pour l’industrie lourde
03/09/2025 - PDF - Anglais - NBN
En savoir plus166,00 € -
NBN ISO/TS 15926-4:2025
Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de "process", y compris les usines de production de pétrole et de gaz — Partie 4: Données de référence initiales
03/09/2025 - PDF - Anglais - NBN
En savoir plus124,00 € -
NBN ISO/TS 15926-11:2025
Systèmes d'automatisation industrielle et intégration — Intégration de données de cycle de vie pour les industries de "process", y compris les usines de production de pétrole et de gaz — Partie 11: RDFS méthodologie pour un usage industriel simplifié des données de référence
03/09/2025 - PDF - Anglais - NBN
En savoir plus187,00 € -
BS EN IEC 61158-6-26:2023 + Redline
Tracked Changes. Industrial communication networks. Fieldbus specifications Application layer protocol specification. Type 26 elements
02/09/2025 - PDF - Anglais - BSI
En savoir plus559,00 € -
NF EN ISO 17779, A89-440 (09/2025)
Brasage fort - Descriptif et qualification d'un mode opératoire de brassage fort pour les matériaux métalliques
01/09/2025 - PDF - Français - AFNOR
En savoir plus78,00 € -
NF EN ISO 13916, A89-253 (09/2025)
Soudage - Mesurage de la température de préchauffage, de la température entre passes et de la température de maintien du préchauffage
01/09/2025 - PDF - Français - AFNOR
En savoir plus49,33 € -
DIN EN 15085-2:2025-09
Railway applications - Welding of railway vehicles and components - Part 2: Requirements for welding manufacturer, German version EN 15085-2:2020+A2:2025
01/09/2025 - PDF - Allemand - DIN
En savoir plus95,42 € -
NF EN ISO 15613, A89-056 (09/2025)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Qualification sur la base d'un assemblage soudé de préproduction
01/09/2025 - PDF - Français - AFNOR
En savoir plus49,50 € -
NF EN ISO 15614-2, A89-057-2 (09/2025)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Épreuve de qualification d'un mode opératoire de soudage - Partie 2 : soudage à l'arc de l'aluminium et de ses alliages
01/09/2025 - PDF - Français - AFNOR
En savoir plus89,33 € -
DIN EN ISO 8502-5:2025-09
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method) (ISO 8502-5:2025), German version EN ISO 8502-5:2025
01/09/2025 - PDF - Allemand - DIN
En savoir plus54,49 € -
DIN 1910-3:2025-09
Welding and allied processes - Plastic welding - Part 3: Processes for welding of thermoplastics
01/09/2025 - PDF - Anglais, Français,Allemand - DIN
En savoir plus95,42 € -
PR NF EN 18205, A89-802PR (09/2025)
Qualification des modes opératoires de soudage des matières plastiques
01/09/2025 - PDF - Anglais, Français - AFNOR
En savoir plus91,50 € -
76,50 €
-
75,00 €
-
NF EN ISO/ASTM 52919, E67-035 (09/2025)
Fabrication additive - Principes de qualification - Méthode d'essai pour les moules en sable pour fonderie métallique
01/09/2025 - PDF - Français - AFNOR
En savoir plus70,50 € -
DIN EN ISO/ASTM 52966:2025-09
Additive manufacturing - Qualification Principles - Framework for categorizing resources and process capabilities (ISO/ASTM DIS 52966:2025), German and English version prEN ISO/ASTM 52966:2025
01/09/2025 - PDF - Anglais, Allemand - DIN
En savoir plus82,15 € -
68,00 €
-
ISO/ASTM 52919:2025
Additive manufacturing — Qualification principles — Test methods for metal casting sand moulds
01/09/2025 - - - ISO
En savoir plus113,00 € -
PR NF EN ISO/ASTM 52967, E04-508 (09/2025)
Fabrication additive pour l'aérospatiale - Principes généraux - Classification de pièces pour les pièces produites par fabrication additive utilisées dans l'aviation
01/09/2025 - PDF - Anglais, Français - AFNOR
En savoir plus83,00 € -
NF EN ISO 17662, A80-100 (09/2025)
Soudage - Étalonnage, vérification et validation du matériel utilisé pour le soudage, y compris pour les procédés connexes
01/09/2025 - PDF - Français - AFNOR
En savoir plus92,50 € -
DIN EN ISO 2361:2025-09
Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:2025), German version EN ISO 2361:2025
01/09/2025 - PDF - Allemand - DIN
En savoir plus67,85 € -
VG 95236-25:2025-09
Tools for electrical components - Part 25: Turret heads for basic tool M22520/1-01, special application, detail standard, Text in German and English.
01/09/2025 - PDF - Anglais, Allemand - DIN
En savoir plus82,15 € -
ASTM D7803-25
Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
01/09/2025 - - - ASTM
En savoir plusDe: 65,00 € -
PR NF ISO 21423 (09/2025)
Robotique - Robots mobiles industriels - Communications et interopérabilité
01/09/2025 - PDF - Anglais, Français - AFNOR
En savoir plus158,50 € -
NF EN IEC 61850-10/A1, C46-908-10/A1 (09/2025)
Réseaux et systèmes de communication pour l'automatisation des systèmes électriques - Partie 10 : essais de conformité
01/09/2025 - PDF - Français - AFNOR
En savoir plus158,50 € -
DIN EN IEC 61514:2025-09
Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs (IEC 65B/1256/CDV:2024), German and English version prEN IEC 61514:2024
01/09/2025 - PDF - Anglais, Allemand - DIN
En savoir plus146,26 € -
ASTM E1032-25
Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film
01/09/2025 - - - ASTM
En savoir plusDe: 65,00 € -
BS EN ISO 8501-3:2025 + Redline
Tracked Changes. Preparation of steel substrates before application paints and related products. Visual assessment surface cleanliness grades welds, edges other areas with imperfections
29/08/2025 - PDF - Anglais - BSI
En savoir plus269,00 € -
75,00 €
-
NBN ISO 11124-7:2025
Préparation des subjectiles d'acier avant application de peintures et de produits assimilés — Spécifications des abrasifs métalliques destinés au décapage par projection — Partie 7: Grenailles angulaires de fonte blanche à haute teneur en chrome
28/08/2025 - PDF - Anglais - NBN
En savoir plus40,00 € -
BS EN ISO/ASTM 52953:2025
Additive manufacturing for metals. General principles. Registration of data acquired from process monitoring and for quality control
28/08/2025 - PDF - Anglais - BSI
En savoir plus312,00 € -
NBN EN ISO/ASTM 52953:2025
Additive manufacturing for metals - General principles - Registration of data acquired from process monitoring and for quality control (ISO/ASTM 52953:2025)
28/08/2025 - - - NBN
En savoir plus124,00 € -
75,00 €
-
NBN ISO 12176-2:2025
Tubes et raccords en matières plastiques — Appareillage pour l'assemblage par soudage des systèmes en polyéthylène — Partie 2: Électrosoudage
28/08/2025 - PDF - Anglais - NBN
En savoir plus124,00 € -
NBN ISO 5175-3:2025
Matériel de soudage au gaz — Dispositifs de sécurité — Partie 3: Bloqueurs de décomposition pour l'acétylène basse pression
28/08/2025 - PDF - Anglais - NBN
En savoir plus40,00 € -
ISO/DIS 20895:2025
Welded joints performance for seismic steel structures
28/08/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
25/30497969 DC:2025
BS ISO 15926-100 Industrial automation systems and integration— Integration of life-cycle data for process plants including oil gas production facilities Part 100: Vocabulary
27/08/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 15926-100:2025
Industrial automation systems and integration — Integration of life-cycle data for process plants including oil and gas production facilities
27/08/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
BS ISO 20929:2025 + Redline
Tracked Changes. Tools for pressing. Heel guidings in large stamping and forming dies
26/08/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
25/30543982 DC:2025
BS EN ISO/ASTM 52966 Additive manufacturing — Qualification Principles — Framework for categorizing resources and process capabilities
25/08/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/ASTM DIS 52966:2025
Additive manufacturing — Qualification Principles — Framework for categorizing resources and process capabilities
25/08/2025 - - - ISO
En savoir plus75,00 € -
BS EN ISO 8501-3:2025
Preparation of steel substrates before application paints and related products. Visual assessment surface cleanliness grades welds, edges other areas with imperfections
22/08/2025 - PDF - Anglais - BSI
En savoir plus191,00 € -
BS ISO 20929:2025
Tools for pressing. Heel guidings in large stamping and forming dies
22/08/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
BS IEC 63241-3-3:2025
Electric motor-operated tools. Dust measurement procedure Particular requirements for transportable planers and thicknessers
22/08/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
BS EN ISO 11126-1:2025 + Redline
Tracked Changes. Preparation of steel substrates before application paints and related products. Specifications for non-metallic blast-cleaning abrasives General introduction classification
21/08/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
NBN EN ISO 8501-3:2025
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface imperfections (ISO 8501-3:2025)
21/08/2025 - - - NBN
En savoir plus58,00 € -
25/30509512 DC:2025
BS ISO 24644-1 Mass customization value chain management Part 1: Framework
21/08/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 24644-1:2025
Management de la chaîne de valeur de la personnalisation de masse
21/08/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
ISO 13916:2025
Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature
20/08/2025 - - - ISO
En savoir plus49,00 € -
40,00 €
-
BS ISO 24251-1:2025
Prevention of hydrogen assisted brittle fracture high-strength steel components Fundamentals and measures
19/08/2025 - PDF - Anglais - BSI
En savoir plus266,00 € -
ISO 15613:2025
Specification and qualification of welding procedures for metallic materials — Qualification based on a pre-production welding test
18/08/2025 - - - ISO
En savoir plus49,00 € -
BS EN ISO 11125-5:2025 + Redline
Tracked Changes. Preparation of steel substrates before application paints and related products. Test methods for metallic blast-cleaning abrasives Determination percentage defective particles microstructure
15/08/2025 - PDF - Anglais - BSI
En savoir plus227,00 € -
IEC 62541-18:2025
IEC 62541-18:2025 OPC unified architecture - Part 18: Role-Based Security
15/08/2025 - - - IEC
En savoir plus290,00 € -
ISO 20929:2025
Tools for pressing — Heel guidings in large stamping and forming dies
14/08/2025 - - - ISO
En savoir plus49,00 € -
BS EN IEC 60974-4:2025 + Redline
Tracked Changes. Arc welding equipment Periodic inspection and testing
14/08/2025 - PDF - Anglais - BSI
En savoir plus373,00 € -
ISO 15614-2:2025
Specification and qualification of welding procedures for metallic materials — Welding procedure test
13/08/2025 - - - ISO
En savoir plus152,00 € -
ISO/ASTM 52953:2025
Additive manufacturing for metals — General principles — Registration of data acquired from process monitoring and for quality control
13/08/2025 - - - ISO
En savoir plus152,00 € -
ISO 24251-1:2025
Prévention de la fragilisation par l'hydrogène des pièces en acier à haute résistance
13/08/2025 - PDF - Anglais - ISO
En savoir plus152,00 € -
25/30480653 DC:2025
BS ISO 23247-6 Automation systems and integration — Digital twin framework for manufacturing Part 6: composition
13/08/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 23247-6:2025
Syste'mes d'automatisation et inte´gration — Cadre technique de jumeau nume´rique dans un contexte de fabrication —
13/08/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
ISO 8501-3:2025
Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness
12/08/2025 - - - ISO
En savoir plus113,00 € -
IEC 62453-1:2025
IEC 62453-1:2025 Field device tool (FDT) interface specification - Part 1: Overview and guidance
12/08/2025 - - - IEC
En savoir plusDe: 371,00 € -
25/30464533 DC:2025
BS ISO 16400-4 Automation systems and integration — Equipment behaviour catalogues for virtual production system Part 4: Application methods
11/08/2025 - PDF - Anglais - BSI
En savoir plus24,00 € -
ISO/DIS 16400-4:2025
Automation systems and integration — Equipment behaviour catalogues for virtual production system
11/08/2025 - PDF - Anglais - ISO
En savoir plus75,00 € -
BS EN ISO 11126-1:2025
Preparation of steel substrates before application paints and related products. Specifications for non-metallic blast-cleaning abrasives General introduction classification
11/08/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
BS EN IEC 60974-4:2025
Arc welding equipment Periodic inspection and testing
08/08/2025 - PDF - Anglais - BSI
En savoir plus266,00 € -
BS EN ISO 11125-5:2025
Preparation of steel substrates before application paints and related products. Test methods for metallic blast-cleaning abrasives Determination percentage defective particles microstructure
07/08/2025 - PDF - Anglais - BSI
En savoir plus162,00 € -
NBN EN ISO 11125-5:2025
Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO 11125-5:2025)
07/08/2025 - - - NBN
En savoir plus58,00 €
