23.040.70 : Tuyaux flexibles
-
293,00 € -
23/30468757 DC:2023
BS EN ISO 6134. Rubber hoses and hose assemblies for saturated steam. Specification
12/10/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30468765 DC:2023
BS EN ISO 8028. Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification
04/08/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30429559 DC:2023
BS EN ISO 4080. Rubber and plastics hoses and tubing, and their assemblies. Determination of permeability to gas
03/08/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 5774:2023 + Redline
Tracked Changes. Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
08/06/2023 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 5774:2023
Plastics hoses. Textile-reinforced types for compressed-air applications. Specification
05/06/2023 - PDF - Anglais -
En savoir plus180,00 € -
23/30446502 DC:2023
BS EN ISO 4641. Rubber hoses and hose assemblies for water suction and discharge. Specification
01/06/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30446514 DC:2023
BS EN ISO 6224. Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
16/05/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN 13483:2022 + Redline
Tracked Changes. Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
28/04/2023 - PDF - Anglais -
En savoir plus382,00 € -
BS EN 13483:2022
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems. Specification
13/04/2023 - PDF - Anglais -
En savoir plus293,00 € -
23/30446498 DC:2023
BS EN ISO 2398. Rubber hoses, textile-reinforced, for compressed air. Specification
21/02/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS ISO 12151-2:2022 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-1 24° cone connector ends O-rings
01/11/2022 - PDF - Anglais -
En savoir plus235,00 € -
BS ISO 12151-2:2022
Connections for hydraulic fluid power and general use — Hose fittings Part 2: with ISO 8434-1 24° cone connector ends O-rings
27/10/2022 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 14420-2:2022 + Redline
Tracked Changes. Hose fittings with clamp units side parts of hose tail
28/09/2022 - PDF - Anglais -
En savoir plus197,00 € -
BS EN 14420-4:2022 + Redline
Tracked Changes. Hose fittings with clamp units Flange connections
23/09/2022 - PDF - Anglais -
En savoir plus235,00 € -
180,00 € -
151,00 €
-
BS EN ISO 4671:2022 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
06/06/2022 - PDF - Anglais -
En savoir plus326,00 € -
BS EN ISO 8330:2022 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Vocabulary
11/05/2022 - PDF - Anglais -
En savoir plus382,00 € -
BS EN ISO 8330:2022
Rubber and plastics hoses and hose assemblies. Vocabulary
09/05/2022 - PDF - Anglais -
En savoir plus293,00 € -
BS EN ISO 18752:2022 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
05/05/2022 - PDF - Anglais -
En savoir plus326,00 € -
BS EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies. Methods of measurement of the dimensions of hoses and the lengths of hose assemblies
03/05/2022 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 18752:2022
Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification
27/04/2022 - PDF - Anglais -
En savoir plus250,00 € -
22/30450615 DC:2022
BS EN 14585-1. Corrugated metal hose assemblies for pressure applications
21/04/2022 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 10619-2:2021 + Redline
Tracked Changes. Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at sub-ambient temperatures
07/02/2022 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 6801:2021 + Redline
Tracked Changes. Rubber and plastics hoses. Determination of volumetric expansion
13/01/2022 - PDF - Anglais -
En savoir plus197,00 € -
BS ISO 12151-3:2021 + Redline
Tracked Changes. Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
21/12/2021 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 6801:2021
Rubber and plastics hoses. Determination of volumetric expansion
20/12/2021 - PDF - Anglais -
En savoir plus151,00 € -
BS ISO 12151-3:2021
Connections for hydraulic fluid power and general use. Hose fittings with ISO 6162-1 or 6162-2 flange ends
29/11/2021 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 10619-2:2021
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at sub-ambient temperatures
27/08/2021 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 1402:2021
Rubber and plastics hoses and hose assemblies. Hydrostatic testing
28/05/2021 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 7233:2021
Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
28/05/2021 - PDF - Anglais -
En savoir plus151,00 € -
BS ISO 23384:2021
Rubber and plastics hoses and hose assemblies, wire or textile reinforced types with working pressure equal or above 70 MPa (700 bar). Specification
28/04/2021 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 12115:2021
Rubber and thermoplastics hoses and hose assemblies for liquid or gaseous chemicals. Specification
28/02/2021 - PDF - Anglais -
En savoir plus331,00 € -
BS EN ISO 8031:2020
Rubber and plastics hoses and hose assemblies. Determination of electrical resistance and conductivity
27/07/2020 - PDF - Anglais -
En savoir plus250,00 € -
BS EN 16436-1:2014+A3:2020
Rubber and plastics hoses, tubing assemblies for use with propane butane their mixtures in the vapour phase Hoses tubings
23/07/2020 - PDF - Anglais -
En savoir plus250,00 € -
20/30359760 DC:2020
BS ISO 20444. Rubber and plastics hoses. Determination of abrasion resistance of the outer cover. Abrasion tests where the hose is rotated against a reciprocating abrasion tool
11/06/2020 - PDF - Anglais -
En savoir plus24,00 € -
BS EN 13766:2018+A1:2020
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of liquid petroleum gas and liquefied natural gas. Specification
19/05/2020 - PDF - Anglais -
En savoir plus250,00 € -
180,00 € -
235,00 €
-
BS EN 1113:2015 + Redline
Tracked Changes. Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
26/02/2020 - PDF - Anglais -
En savoir plus326,00 € -
BS EN 857:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
26/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 6802:2018 + Redline
Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
26/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 854:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
26/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 10619-1:2018 + Redline
Tracked Changes. Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at ambient temperature
26/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 8308:2015 + Redline
Tracked Changes. Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
26/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
PD ISO/TS 17165-2:2018 + Redline
Tracked Changes. Hydraulic fluid power. Hose assemblies Practices for hydraulic hose
26/02/2020 - PDF - Anglais -
En savoir plus326,00 € -
BS EN ISO 7326:2016 + Redline
Tracked Changes. Rubber and plastics hoses. Assessment of ozone resistance under static conditions
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 13765:2018 + Redline
Tracked Changes. Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
25/02/2020 - PDF - Anglais -
En savoir plus326,00 € -
BS EN 13618:2016 + Redline
Tracked Changes. Flexible hose assemblies in drinking water installations. Functional requirements and test methods
25/02/2020 - PDF - Anglais -
En savoir plus382,00 € -
BS EN ISO 8033:2017 + Redline
Tracked Changes. Rubber and plastics hoses. Determination of adhesion between components
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 8331:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
25/02/2020 - PDF - Anglais -
En savoir plus326,00 € -
BS EN ISO 2398:2016 + Redline
Tracked Changes. Rubber hoses, textile-reinforced, for compressed air. Specification
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 6803:2017 + Redline
Tracked Changes. Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN ISO 7751:2016 + Redline
Tracked Changes. Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
25/02/2020 - PDF - Anglais -
En savoir plus197,00 € -
BS EN 853:2015 + Redline
Tracked Changes. Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 1765:2016 + Redline
Tracked Changes. Rubber hose assemblies for oil suction and discharge services. Specification for the assemblies
25/02/2020 - PDF - Anglais -
En savoir plus382,00 € -
BS EN 560:2018 + Redline
Tracked Changes. Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
25/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 1762:2018 + Redline
Tracked Changes. Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
24/02/2020 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 16436-2:2018
Rubber and plastics hoses, tubing assemblies for use with propane butane their mixture in the vapour phase Assemblies
30/10/2019 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 1403:2019
Rubber hoses, textile-reinforced, for general-purpose water applications. Specification
16/09/2019 - PDF - Anglais -
En savoir plus151,00 € -
BS EN 14423:2013+A2:2019
Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
22/05/2019 - PDF - Anglais -
En savoir plus250,00 € -
BS EN 856:2015
Rubber hoses and hose assemblies. Rubber-covered spiral wire reinforced hydraulic type. Specification
15/03/2019 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 1762:2018
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa). Specification
14/01/2019 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 6802:2018
Rubber or plastics hoses and hose assemblies. Hydraulic impulse test with flexing
31/10/2018 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 560:2018
Gas welding equipment. Hose connections for equipment for welding, cutting and allied processes
19/09/2018 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 13765:2018
Thermoplastic multi-layer (non-vulcanized) hoses and hose assemblies for the transfer of hydrocarbons, solvents and chemicals. Specification
05/07/2018 - PDF - Anglais -
En savoir plus250,00 € -
PD ISO/TS 17165-2:2018
Hydraulic fluid power. Hose assemblies Practices for hydraulic hose
10/04/2018 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 28017:2018
Rubber hoses and hose assemblies, wire or textile reinforced, for dredging applications. Specification
09/03/2018 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 10619-1:2018
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at ambient temperature
09/03/2018 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 10960:2018
Rubber and plastics hoses. Assessment of ozone resistance under dynamic conditions
23/02/2018 - PDF - Anglais -
En savoir plus151,00 € -
BS EN ISO 5359:2014+A1:2017
Anaesthetic and respiratory equipment. Low-pressure hose assemblies for use with medical gases
31/01/2018 - PDF - Anglais -
En savoir plus293,00 € -
PD CEN/TR 14585-3:2017
Corrugated metal hose assemblies for pressure applications Design method
14/12/2017 - PDF - Anglais -
En savoir plus331,00 € -
BS EN ISO 6134:2017
Rubber hoses and hose assemblies for saturated steam. Specification
30/09/2017 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 16821:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses
25/08/2017 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 16820:2017
Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining
25/08/2017 - PDF - Anglais -
En savoir plus250,00 € -
BS ISO 12151-1:2010+A1:2017
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-3 O-ring face seal ends
30/04/2017 - PDF - Anglais -
En savoir plus250,00 € -
PD ISO/TS 16975-2:2016
Respiratory protective devices. Selection, use and maintenance Condensed guidance to establishing implementing a respiratory device programme
31/03/2017 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 6803:2017
Rubber or plastics hoses and hose assemblies. Hydraulic-pressure impulse test without flexing
31/03/2017 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 8033:2017
Rubber and plastics hoses. Determination of adhesion between components
31/01/2017 - PDF - Anglais -
En savoir plus180,00 € -
BS ISO 13775-2:2016
Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications
31/12/2016 - PDF - Anglais -
En savoir plus250,00 € -
180,00 €
-
BS EN ISO 4641:2016
Rubber hoses and hose assemblies for water suction and discharge. Specification
31/12/2016 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 7751:2016
Rubber and plastics hoses and hose assemblies. Ratios of proof and burst pressure to maximum working pressure
31/12/2016 - PDF - Anglais -
En savoir plus151,00 € -
BS EN ISO 2398:2016
Rubber hoses, textile-reinforced, for compressed air. Specification
31/12/2016 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 13618:2016
Flexible hose assemblies in drinking water installations. Functional requirements and test methods
31/12/2016 - PDF - Anglais -
En savoir plus293,00 € -
BS EN ISO 8331:2016
Rubber and plastics hoses and hose assemblies. Guidelines for selection, storage, use and maintenance
31/12/2016 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 7326:2016
Rubber and plastics hoses. Assessment of ozone resistance under static conditions
31/10/2016 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 16643:2016
Rubber and plastics hoses and hose assemblies. Non-bonded fluoroplastic lined (e.g. PTFE) hoses and hose assemblies for liquid and gaseous chemicals. Specification
31/08/2016 - PDF - Anglais -
En savoir plus331,00 € -
BS EN 1765:2016
Flexibles en caoutchouc pour chargement et déchargement des produits pétroliers. Spécifications pour les flexibles
31/08/2016 - PDF - Anglais -
En savoir plus293,00 € -
16/30302789 DC:2016
BS ISO 19718. Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic power units used in heavy duty hydraulic tool applications. Specification
04/04/2016 - PDF - Anglais -
En savoir plus24,00 € -
BS EN 14420-8:2013+A1:2016
Hose fittings with clamp units Symmetrical half coupling (Guillemin system)
29/02/2016 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 8308:2015
Rubber and plastics hoses and tubing. Determination of transmission of liquids through hose and tubing walls
31/10/2015 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 853:2015
Rubber hoses and hose assemblies. Wire braid reinforced hydraulic type. Specification
30/04/2015 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 1113:2015
Sanitary tapware. Shower hoses for sanitary tapware for water supply systems of type 1 and type 2. General technical specification
30/04/2015 - PDF - Anglais -
En savoir plus250,00 € -
BS EN 854:2015
Rubber hoses and hose assemblies. Textile reinforced hydraulic type. Specification
30/04/2015 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 16617:2015
Pipework. Corrugated metal hose assemblies for combustible gas. Performance requirements, testing and marking
30/04/2015 - PDF - Anglais -
En savoir plus250,00 € -
BS EN 857:2015
Rubber hoses and hose assemblies. Wire braid reinforced compact type for hydraulic applications. Specification
30/04/2015 - PDF - Anglais -
En savoir plus180,00 € -
180,00 €
-
BS EN ISO 8029:2014
Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification
31/08/2014 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 3994:2014
Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification
31/08/2014 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 8030:2014
Rubber and plastics hoses. Method of test for flammability
31/07/2014 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 1947:2014
Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles
31/07/2014 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 14540:2014
Fire-fighting hoses. Non-percolating layflat hoses for fixed systems
31/07/2014 - PDF - Anglais -
En savoir plus180,00 € -
PD CEN/TS 16650:2014
Specification for hose couplings for petrol, oil and lubricants. High pressure couplings
30/06/2014 - PDF - Anglais -
En savoir plus151,00 € -
BS EN 13482:2013
Rubber hoses and hose assemblies for asphalt and bitumen. Specification
31/10/2013 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 14420-1:2013
Hose fittings with clamp units Requirements, types of fixing and connection, designation testing
31/07/2013 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 14420-3:2013
Hose fittings with clamp units Clamp units, bolted or pinned
31/07/2013 - PDF - Anglais -
En savoir plus180,00 € -
348,00 € -
250,00 € -
BS EN 14422:2013
Clamp type coupling assemblies for liquefied petroleum gas (LPG) transfer hoses
31/07/2013 - PDF - Anglais -
En savoir plus250,00 € -
180,00 € -
BS EN 1360:2013
Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems. Specification
30/06/2013 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 10380:2012 (R2017)
Tuyauteries. Tuyaux et tuyauteries métalliques flexibles onduleux
31/10/2012 - PDF - Anglais -
En savoir plus331,00 € -
12/30238564 DC:2012
BS ISO 16301. Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for hydraulic jacks and for hydraulic power units used in hydraulic tools. Specification
13/08/2012 - PDF - Anglais -
En savoir plus24,00 € -
BS ISO 10619-3:2011
Rubber and plastics hoses tubing. Measurement of flexibility stiffness Bending tests at high low temperatures
31/12/2011 - PDF - Anglais -
En savoir plus151,00 € -
BS EN ISO 30013:2011
Rubber and plastics hoses. Methods of exposure to laboratory light sources. Determination of changes in colour, appearance and other physical properties
31/12/2011 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 6224:2011
Thermoplastics hoses, textile-reinforced, for general-purpose water applications. Specification
30/11/2011 - PDF - Anglais -
En savoir plus180,00 € -
348,00 € -
BS EN ISO 4023:2009
Rubber hoses and hose assemblies for steam. Test methods
30/06/2010 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 4080:2009
Rubber and plastics hoses and hose assemblies. Determination of permeability to gas
28/02/2010 - PDF - Anglais -
En savoir plus180,00 € -
BS ISO 12151-6:2009
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-6 60° cone ends
31/12/2009 - PDF - Anglais -
En savoir plus250,00 € -
BS ISO 28702:2008
Rubber and plastics hoses and tubing. Textile reinforced types. Sub-ambient temperature crush test
30/11/2008 - PDF - Anglais -
En savoir plus151,00 € -
BS EN 1112:2008
Sanitary tapware. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification
29/08/2008 - PDF - Anglais -
En savoir plus250,00 € -
BS EN ISO 1307:2008
Rubber and plastics hoses. Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses
29/02/2008 - PDF - Anglais -
En savoir plus151,00 € -
180,00 € -
BS ISO 17165-1:2007
Hydraulic fluid power. Hose assemblies Dimensions and requirements
30/11/2007 - PDF - Anglais -
En savoir plus293,00 € -
BS ISO 12151-5:2007
Connections for hydraulic fluid power and general use. Hose fittings with ISO 8434-2 37° flared ends
31/08/2007 - PDF - Anglais -
En savoir plus180,00 € -
BS ISO 12151-4:2007
Connections for hydraulic fluid power and general use. Hose fittings with ISO 6149 metric stud ends
31/08/2007 - PDF - Anglais -
En savoir plus180,00 € -
BS EN 14800:2007
Corrugated safety metal hose assemblies for the connection of domestic appliances using gaseous fuels
30/04/2007 - PDF - Anglais -
En savoir plus348,00 € -
BS EN 14585-1:2006
Corrugated metal hose assemblies for pressure applications Requirements
31/05/2006 - PDF - Anglais -
En savoir plus250,00 € -
PD CEN/TR 14585-2:2006
Corrugated metal hose assemblies for pressure applications Guidance on the use of conformity assessment procedures
28/04/2006 - PDF - Anglais -
En savoir plus180,00 € -
250,00 € -
BS 6501-1:2004
Metal hose assemblies Guidance on the construction and use of corrugated
19/02/2004 - PDF - Anglais -
En savoir plus250,00 € -
293,00 € -
PD ISO/TR 17784:2003
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
05/12/2003 - PDF - Anglais -
En savoir plus348,00 € -
BS EN 561:2002
Gas welding equipment. Quick-action coupling with shut-off valves for welding, cutting and allied processes
10/07/2002 - PDF - Anglais -
En savoir plus180,00 € -
151,00 € -
BS 4089:1999
Specification for metallic hose assemblies for liquid petroleum gases and liquefied natural gases
15/12/1999 - PDF - Anglais -
En savoir plus151,00 € -
BS ISO 13774:1998
Rubber and plastics hoses for fuels for internal combustion engines. Method of test for flammability
15/10/1999 - PDF - Anglais -
En savoir plus151,00 € -
BS EN ISO 8032:1999
Rubber and plastics hose assemblies. Flexing combined with hydraulic impulse test (half-omega test)
15/09/1999 - PDF - Anglais -
En savoir plus151,00 € -
BS EN 1761:1999
Rubber hoses and hose assemblies for fuel truck delivery. Specification
15/06/1999 - PDF - Anglais -
En savoir plus151,00 € -
BS EN ISO 10807:1997
Pipework. Corrugated flexible metallic hose assemblies for the protection of electrical cables in explosive atmosphere
15/03/1997 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 7662:1996
Rubber and plastics hoses. Determination of abrasion of lining
15/12/1996 - PDF - Anglais -
En savoir plus151,00 € -
BS EN 1327:1996
Gas welding equipment. Thermoplastic hoses for welding and allied processes
15/12/1996 - PDF - Anglais -
En savoir plus180,00 € -
BS 5173-103.13:1994
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination resistance to fire
15/01/1994 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-100:1992
Method of test for rubber and plastics hoses hose assemblies. General introduction
28/02/1992 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-103.7:1991
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination fracture resistance rigid polymer helical reinforcement in thermoplastics
31/01/1991 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-102.4:1990
Methods of test for rubber and plastics hoses hose assemblies. Hydraulic pressure tests Determination volumetric expansion hydraulic
30/11/1990 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-103.2:1990
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination crush resistance
31/10/1990 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-103.6:1990
Methods of test for rubber and plastics hoses hose assemblies. Physical tests Determination ignitability lining
31/08/1990 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-106.2:1990
Methods of test for rubber and plastics hoses hose assemblies. Environmental tests General requirements high temperature ageing
31/08/1990 - PDF - Anglais -
En savoir plus151,00 € -
BS 1103:1989
Specification for fabrics for the reinforcement of rubber hoses
31/10/1989 - PDF - Anglais -
En savoir plus151,00 € -
BS 5173-102.8:1987
Methods of test for rubber and plastics hoses hose assemblies. Hydraulic pressure tests Pressure impulse rigid helix reinforced thermoplastics
30/04/1987 - PDF - Anglais -
En savoir plus151,00 € -
BS 5122:1986
Specification for rubber hoses for low-pressure and medium-pressure saturated steam
31/12/1986 - PDF - Anglais -
En savoir plus151,00 € -
BS 5244:1986 (R2017)
Tuyaux et assemblages de tuyaux en caoutchouc pour transmissions hydrauliques. Recommandations d'emploi, de stockage et de duree de vie
28/11/1986 - PDF - Anglais -
En savoir plus151,00 €
