23 : Fluidique et composants à usage général
-
NBN ISO 23555-2:2023
Gas pressure safety and control devices for use in gas transmission, distribution and installations for inlet pressures up to and including 10 MPa — Part 2: Gas pressure regulator ISO 23555-2:2022
03/02/2023 - PDF - Anglais -
En savoir plus184,00 € -
23/30466476 DC:2023
BS EN 13828. Building valves. Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings. Tests and requirements
03/02/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
02/02/2023 - PDF - Anglais -
En savoir plus180,00 € -
DIN EN 13110:2023-02
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction, German version EN 13110:2022
01/02/2023 - PDF - Allemand -
En savoir plus120,84 € -
DIN 86038-3:2023-02
Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 3: Lapped pipe ends for but welding DN 32 to DN 125
01/02/2023 - PDF - Allemand -
En savoir plus39,35 € -
ASTM F1807-23
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F442/F442M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
DIN EN ISO 8233:2023-02
Thermoplastics valves - Torque - Test method (ISO/DIS 8233:2023), German and English version prEN ISO 8233:2023
01/02/2023 - PDF - Anglais, Allemand -
En savoir plus59,63 € -
DIN 86037-3:2023-02
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 3: Loose flanges
01/02/2023 - PDF - Allemand -
En savoir plus39,35 € -
NF EN 15001-2, M50-001-2 (02/2023)
Infrastructures gazières - Canalisations d'installation de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles - Partie 2 : exigences fonctionnelles détaillées pour la mise en service, l'exploitation et la maintenance
01/02/2023 - Papier - Français -
En savoir plus86,67 € -
UNE-EN ISO 13338:2023
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
01/02/2023 - PDF - Anglais -
En savoir plus69,60 € -
ASTM F2806-23
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2080-23
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
DIN EN 13828:2023-02
Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements, German and English version prEN 13828:2023
01/02/2023 - PDF - Anglais, Allemand -
En savoir plus99,35 € -
ASTM F3347-23 + Redline
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM C828-23 + Redline
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
01/02/2023 - PDF - Anglais -
En savoir plus57,00 € -
ASTM F441/F441M-23
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2145-23
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
NBN ISO 4370:2023
Environmental life cycle assessment and recycling of ductile iron pipes for water applications ISO 4370:2022
01/02/2023 - PDF - Anglais -
En savoir plus89,00 € -
DIN 3376-1:2023-02
Gas meter connections - Part 1: Two pipes connection, DVGW code of practice
01/02/2023 - PDF - Allemand -
En savoir plus72,80 € -
ASTM F2389-23
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
PR NF EN 334/A1, E29-171/A1PR (02/2023)
Régulateurs de pression de gaz pour des pressions amont jusqu'à 100 bar
01/02/2023 - Papier - Anglais, Français -
En savoir plus56,00 € -
ASTM F1807-23 + Redline
Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F442/F442M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
DIN EN 10217-1/A1:2023-02
Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties, German and English version EN 10217-1:2019/prA1:2023
01/02/2023 - PDF - Anglais, Allemand -
En savoir plus39,35 € -
NF ISO 11500, E48-658 (02/2023)
Transmissions hydrauliques - Détermination du niveau de pollution particulaire d'un échantillon liquide par comptage automatique des particules par absorption de lumière
01/02/2023 - Papier - Français -
En savoir plus86,67 € -
DIN 86038-1:2023-02
Ships and marine technology - Loose flanges and lapped pipe ends extra light duty - Part 1: Lapped pipe ends DN 32 to DN 125
01/02/2023 - PDF - Allemand -
En savoir plus39,35 € -
NF EN 15001-1, M50-001-1 (02/2023)
Infrastructures gazières - Canalisations d'installations de gaz avec une pression de service supérieure à 0,5 bar pour les installations industrielles et supérieure à 5 bar pour les installations industrielles et non industrielles (domestiques et commerciales) - Partie 1 : exigences fonctionnelles détaillées relatives à la conception, aux matériaux, à la construction, à l'inspection et aux essais
01/02/2023 - Papier - Français -
En savoir plus192,00 € -
ASTM F2806-23 + Redline
Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F2080-23 + Redline
Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F441/F441M-23 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F2145-23 + Redline
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
NBN ISO 23991:2023
Canalisations en fonte ductile pour l'irrigation — Conception des produits et installation ISO 23991:2022
01/02/2023 - PDF - Français -
En savoir plus142,00 € -
DIN EN 14382/A1:2023-02
Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar), German and English version EN 14382:2019/prA1:2022
01/02/2023 - PDF - Anglais, Allemand -
En savoir plus32,34 € -
DIN 86037-2:2023-02
Loose flanges and welding necks for pipes of copper-nickel-alloys - Part 2: Welding necks
01/02/2023 - PDF - Allemand -
En savoir plus45,98 € -
NBN ISO 23991:2023
Irrigation applications of ductile iron pipelines — Product design and installation ISO 23991:2022
01/02/2023 - PDF - Anglais -
En savoir plus142,00 € -
DIN 3376-2:2023-02
Gasmeter connections - Part 2: One pipe connection, DVGW code of practice
01/02/2023 - PDF - Allemand -
En savoir plus92,62 € -
UNE-EN ISO 13338:2023
Gas cylinders - Gases and gas mixtures - Determination of corrosiveness for the selection of cylinder valve outlet (ISO 13338:2022)
01/02/2023 - PDF - Espagnol -
En savoir plus58,00 € -
ASTM F2389-23 + Redline
Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
DIN EN 12972/A1:2023-02
Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks, German and English version EN 12972:2018/prA1:2023
01/02/2023 - PDF - Anglais, Allemand -
En savoir plus52,90 € -
ASTM F3347-23
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM C828-23
Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
01/02/2023 - PDF - Anglais -
En savoir plus48,00 € -
23/30452437 DC:2023
BS EN 1514-1. Flanges and their joints. Dimensions of gaskets for PN-designated flanges Non-metallic flat with or without inserts
27/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30464431 DC:2023
BS EN ISO 11363-1 AMD 1. Gas cylinders. 17E and 25E taper threads for connection of valves to gas cylinders Part Specifications
27/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30452433 DC:2023
BS EN 12560-1. Flanges and their joints. Dimensions of gaskets for Class-designated flanges Part 1. Non-metallic flat with or without inserts
27/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30468444 DC:2023
BS ISO 5115.2. Industrial valves. Part-turn valve actuation
25/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
25/01/2023 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 16890-2:2022 + Redline
Tracked Changes. Air filters for general ventilation Measurement of fractional efficiency and air flow resistance
25/01/2023 - PDF - Anglais -
En savoir plus492,00 € -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
25/01/2023 - PDF - Anglais -
En savoir plus180,00 € -
BS ISO 23369:2022 + Redline
Tracked Changes. Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
23/01/2023 - PDF - Anglais -
En savoir plus382,00 € -
BS ISO 11515:2022 + Redline
Tracked Changes. Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
20/01/2023 - PDF - Anglais -
En savoir plus454,00 € -
BS ISO 23369:2022
Hydraulic fluid power. Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions
20/01/2023 - PDF - Anglais -
En savoir plus293,00 € -
23/30427632 DC:2023
BS ISO 16422-5. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 5. Fitness purpose system
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30464876 DC:2023
BS EN 12972 AMD1. Tanks for transport of dangerous goods. Testing, inspection and marking of metallic tanks
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30427624 DC:2023
BS ISO 16422-1. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 1. General
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30465607 DC:2023
BS EN 10217-1 AMD1. Welded steel tubes for pressure purposes. Technical delivery conditions Part 1. Electric welded and submerged arc non-alloy with specified room temperature properties
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30427627 DC:2023
BS ISO 16422-2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 2:
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
18/01/2023 - PDF - Espagnol -
En savoir plus34,00 € -
NBN ISO 23876:2023
Gas cylinders — Cylinders and tubes of composite construction — Acoustic emission examination (AT) for periodic inspection and testing ISO 23876:2022
18/01/2023 - PDF - Anglais -
En savoir plus89,00 € -
UNE-EN 17649:2023
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
18/01/2023 - PDF - Anglais -
En savoir plus104,40 € -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
18/01/2023 - PDF - Anglais -
En savoir plus55,20 € -
UNE-EN ISO 6149-1:2023
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
18/01/2023 - PDF - Espagnol -
En savoir plus60,00 € -
UNE-EN ISO 15874-1:2013/A1:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General - Amendment 1: Impact test (ISO 15874-1:2013/Amd 1:2022)
18/01/2023 - PDF - Anglais -
En savoir plus40,80 € -
NBN ISO 11171:2023
Hydraulic fluid power — Calibration of automatic particle counters for liquids ISO 11171:2022
18/01/2023 - PDF - Anglais -
En savoir plus184,00 € -
NBN ISO 23876:2023
Bouteilles à gaz — Bouteilles et tubes composites — Essai par émission acoustique (EA) pour les contrôles et les essais périodiques ISO 23876:2022
18/01/2023 - PDF - Français -
En savoir plus89,00 € -
UNE-EN ISO 6149-1:2023
Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring seal (ISO 6149-1:2022)
18/01/2023 - PDF - Anglais -
En savoir plus72,00 € -
UNE-EN 17649:2023
Gas infrastructure - Safety Management System (SMS) and Pipeline Integrity Management System (PIMS) - Functional requirements
18/01/2023 - PDF - Espagnol -
En savoir plus87,00 € -
UNE-EN ISO 15874-2:2013/A2:2023
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 2: Pipes - Amendement 2: Impact test (ISO 15874-2:2013/Amd 2:2022)
18/01/2023 - PDF - Espagnol -
En savoir plus46,00 € -
NBN ISO 4405:2023
Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method ISO 4405:2022
17/01/2023 - PDF - Anglais -
En savoir plus89,00 € -
SAE J 1926/1:2023-01-17
Connections for General Use and Fluid Power - Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing - Part 1: Threaded Port with O-Ring Seal in Truncated Housing
17/01/2023 - PDF - Anglais -
En savoir plus87,00 € -
NBN ISO 4405:2023
Transmissions hydrauliques — Pollution des fluides — Détermination de la pollution particulaire par la méthode gravimétrique ISO 4405:2022
17/01/2023 - PDF - Français -
En savoir plus89,00 € -
NBN ISO 11515:2023
Gas cylinders — Refillable composite reinforced tubes of water capacity between 450 l and 3000 l — Design, construction and testing ISO 11515:2022
17/01/2023 - PDF - Anglais -
En savoir plus163,00 € -
22/30426764 DC:2023
BS ISO 5115. Industrial valves. Part-turn valve actuation
16/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30453876 DC:2023
BS EN ISO 8233. Thermoplastics valves. Torque. Test method
16/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
15/01/2023 - PDF - Anglais -
En savoir plus58,00 € -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
15/01/2023 - PDF - Français -
En savoir plus58,00 € -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
15/01/2023 - PDF - Allemand -
En savoir plus58,00 € -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
15/01/2023 - PDF - Anglais -
En savoir plus37,00 € -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
15/01/2023 - PDF - Français -
En savoir plus37,00 € -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
15/01/2023 - PDF - Allemand -
En savoir plus37,00 € -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
14/01/2023 - PDF - Anglais -
En savoir plus58,00 € -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
14/01/2023 - PDF - Français -
En savoir plus58,00 € -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
14/01/2023 - PDF - Allemand -
En savoir plus58,00 € -
UNE-EN 12245:2023
Transportable gas cylinders - Fully wrapped composite cylinders
11/01/2023 - PDF - Espagnol -
En savoir plus114,00 € -
UNE-EN 12245:2023
Transportable gas cylinders - Fully wrapped composite cylinders
11/01/2023 - PDF - Anglais -
En savoir plus136,80 € -
449,00 €
-
BS ISO 11500:2022 + Redline
Tracked Changes. Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
05/01/2023 - PDF - Anglais -
En savoir plus326,00 € -
23/30428173 DC:2023
BS ISO 10302-1. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Part 1. Airborne measurement
04/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 22434:2022 + Redline
Tracked Changes. Gas cylinders. Inspection and maintenance of valves
04/01/2023 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 12952-3:2022 + Redline
Tracked Changes. Water-tube boilers and auxiliary installations Design calculation for pressure parts of the boiler
03/01/2023 - PDF - Anglais -
En savoir plus586,00 € -
PR NF EN IEC 63458-2, C73-458-2PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 2 : Flexibles, tuyauteries flexibles et connecteurs à haute pression
01/01/2023 - Papier - Anglais, Français -
En savoir plus64,50 € -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
01/01/2023 - Papier - Français -
En savoir plus48,00 € -
DIN EN ISO 13137:2023-01
Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO 13137:2022), German version EN ISO 13137:2022
01/01/2023 - PDF - Allemand -
En savoir plus110,00 € -
PR NF EN 1092-1/A1, E29-200-1/A1PR (01/2023)
Brides et leurs assemblages - Brides circulaires pour tubes, appareils de robinetterie, raccords et accessoires, désignées PN - Partie 1 : Brides en acier
01/01/2023 - Papier - Anglais, Français -
En savoir plus107,50 € -
ASME BPVC.VIII.2-2023
Section VIII, Rules for Construction of Pressure Vessels, Division 2, Alternative Rules
01/01/2023 - Papier - Anglais -
En savoir plus893,00 € -
DIN EN 14986:2023-01
Design of fans working in potentially explosive atmospheres, German and English version prEN 14986:2022
01/01/2023 - PDF - Anglais, Allemand -
En savoir plus148,04 € -
PR NF EN 14986, E51-003PR (01/2023)
Conception des ventilateurs pour les atmosphères explosibles
01/01/2023 - Papier - Anglais, Français -
En savoir plus138,50 € -
AD 2000 Code in English - The full set in two ring binders
Abonnement calendaire 12 mois avec mise à jour payante
(reconduction tacite sans résiliation avec préavis de 3 mois)
01/01/2023 - Papier - Anglais -
En savoir plus1 787,00 € -
VdS 2100-45:2023-01
VdS Guidelines for Water Extinguishing Systems - Polymer Coated Pipelines - Requirements and Test Methods
01/01/2023 - - -
En savoir plus26,88 € -
PR NF EN IEC 63458-3, C73-458-3PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 3 : Dispositif pulvérisateur à haute pression
01/01/2023 - Papier - Anglais, Français -
En savoir plus97,50 € -
NF E29-140 (01/2023)
Robinets de commande pour appareils à usage domestique utilisant les combustibles gazeux - Robinets de sécurité - Robinet à obturation automatique intégrée (ROAI)
01/01/2023 - Papier - Français -
En savoir plus75,67 € -
DIN EN 15969-2:2023-01
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 2: Commercial and logistic data, German version EN 15969-2:2022.
01/01/2023 - PDF - Allemand -
En savoir plus120,84 € -
ASTM Volume 01.01 - Multi-User - Single-Site Online
Steel–Piping, Tubing, Fittings
The subscription ends 12 months from the day your order is processed.
01/01/2023 - Internet - Anglais -
En savoir plus958,55 € -
318,00 €
-
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
01/01/2023 - Papier - Français -
En savoir plus60,67 € -
PR NF EN IEC 63458-1, C73-458-1PR (01/2023)
Machines à jet d'eau à haute pression - Sécurité - Partie 1 : Unité à jet d'eau à haute pression
01/01/2023 - Papier - Anglais, Français -
En savoir plus107,50 € -
ASME BPVC.XII-2023
Section XII, Rules for Construction and Continued Service of Transport Tanks
01/01/2023 - Papier - Anglais -
En savoir plus599,00 € -
DIN EN 15969-1:2023-01
Tanks for transport of dangerous goods - Digital interface for the data transfer between tank vehicle and with stationary facilities - Part 1: Protocol specification - Control, measurement and event data, German version EN 15969-1:2022
01/01/2023 - PDF - Allemand -
En savoir plus216,26 € -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
01/01/2023 - Papier - Français -
En savoir plus60,67 € -
UNE-EN ISO 8330:2022
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
28/12/2022 - PDF - Espagnol -
En savoir plus84,00 € -
UNE-EN ISO 8330:2022
Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2022)
28/12/2022 - PDF - Anglais -
En savoir plus100,80 € -
BS ISO 11500:2022
Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle
23/12/2022 - PDF - Anglais -
En savoir plus250,00 € -
NBN EN 13480-3:2017/A5:2022
Tuyauteries industrielles métalliques - Partie 3: Conception et calcul
22/12/2022 - PDF - Français -
En savoir plus20,00 € -
23/30444859 DC:2022
BS EN 334:2019/A1 Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
22/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
NBN EN 13110:2022
LPG equipment and accessories - Transportable refillable welded aluminium cylinders for liquefied petroleum gas (LPG) - Design and construction
22/12/2022 - PDF - Anglais -
En savoir plus121,00 € -
NBN EN 13110:2022
Flüssiggas-Geräte und Ausrüstungsteile - Ortsbewegliche, wiederbefüllbare geschweißte Flaschen aus Aluminium für Flüssiggas (LPG) - Auslegung und Bau
22/12/2022 - PDF - Allemand -
En savoir plus121,00 € -
NBN EN 13480-3:2017/A5:2022
Metallische industrielle Rohrleitungen - Teil 3: Konstruktion und Berechnung
22/12/2022 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN 13480-3:2017/A5:2022
Metallic industrial piping - Part 3: Design and calculation
22/12/2022 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN 13110:2022
Équipements pour gaz de pétrole liquéfiés et leurs accessoires - Bouteilles soudées transportables et rechargeables en aluminium pour gaz de pétrole liquéfié (GPL) - Conception et construction
22/12/2022 - PDF - Français -
En savoir plus121,00 € -
UNE-EN ISO 18752:2022
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
21/12/2022 - PDF - Anglais -
En savoir plus82,80 € -
BS EN 12889:2022 + Redline
Tracked Changes. Trenchless construction and testing of drains and sewers
21/12/2022 - PDF - Anglais -
En savoir plus454,00 € -
BS EN ISO 13349-2:2022 + Redline
Tracked Changes. Fans. Vocabulary and definitions of categories Categories
21/12/2022 - PDF - Anglais -
En savoir plus382,00 € -
UNE-EN 476:2022
General requirements for components used in drains and sewers
21/12/2022 - PDF - Anglais -
En savoir plus87,60 € -
BS EN ISO 10497:2022 + Redline
Tracked Changes. Testing of valves. Fire type-testing requirements
21/12/2022 - PDF - Anglais -
En savoir plus326,00 € -
UNE-EN ISO 18752:2022
Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2022)
21/12/2022 - PDF - Espagnol -
En savoir plus69,00 € -
UNE-EN 476:2022
General requirements for components used in drains and sewers
21/12/2022 - PDF - Espagnol -
En savoir plus73,00 € -
NBN EN 1566-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
15/12/2022 - PDF - Anglais -
En savoir plus163,00 € -
NBN EN ISO 9809-4:2022
Bouteilles à gaz - Conception, construction et essais des bouteilles à gaz et des tubes rechargeables en acier sans soudure - Partie 4: Bouteilles en acier inoxydable ayant une valeur de Rm inférieure à 1 100 MPa (ISO 9809-4:2021)
15/12/2022 - PDF - Français -
En savoir plus184,00 € -
NBN EN 1566-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
15/12/2022 - PDF - Français -
En savoir plus163,00 € -
NBN EN 1566-1:2022
Kunststoff- Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
15/12/2022 - PDF - Allemand -
En savoir plus163,00 € -
22/30457287 DC:2022
BS EN 14986. Design of fans working in potentially explosive atmospheres
15/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
NBN EN 1455-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
15/12/2022 - PDF - Anglais -
En savoir plus163,00 € -
NBN EN ISO 9809-4:2022
Gasflaschen - Auslegung, Herstellung und Prüfung von wiederbefüllbaren nahtlosen Gasflaschen aus Stahl - Teil 4: Flaschen aus Edelstahl mit einem Rm-Wert von weniger als 1 100 MPa (ISO 9809-4:2021)
15/12/2022 - PDF - Allemand -
En savoir plus184,00 € -
NBN EN 1455-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
15/12/2022 - PDF - Français -
En savoir plus163,00 € -
NBN EN 1455-1:2022
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
15/12/2022 - PDF - Allemand -
En savoir plus163,00 € -
NBN EN ISO 9809-4:2022
Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100 MPa (ISO 9809-4:2021)
15/12/2022 - PDF - Anglais -
En savoir plus184,00 € -
250,00 €
-
BS ISO 10094-2:2021 + Redline
Tracked Changes. Pneumatic fluid power. Electro-pneumatic pressure control valves Test methods to determine main characteristics include in the supplier's literature
09/12/2022 - PDF - Anglais -
En savoir plus382,00 € -
UNE-EN 17613:2022
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
07/12/2022 - PDF - Espagnol -
En savoir plus68,00 € -
UNE-EN 17613:2022
LPG equipment and accessories - Composite piping for use with LPG in liquid phase and vapour pressure phase - Design and manufacture
07/12/2022 - PDF - Anglais -
En savoir plus81,60 € -
22/30430300 DC:2022
BS EN ISO 5640. Industrial valves. Mounting kits for part-turn valve actuator attachment
06/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
22/30449834 DC:2022
BS ISO 21360-6. Vacuum technology. Standard methods for measuring vacuum-pump performance Part 6. Cryo vacuum pumps
05/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
NF EN 13480-3V1/A5, E86-700-3/A5 (12/2022)
Tuyauteries industrielles métalliques - Partie 3 : conception et calcul
01/12/2022 - Papier - Français -
En savoir plus78,50 € -
DIN EN 1515-4:2022-12
Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU, German version EN 1515-4:2021 + AC:2022
01/12/2022 - PDF - Allemand -
En savoir plus85,79 € -
NF EN 16147+A1, E38-115 (12/2022)
Pompes à chaleur avec compresseur entraîné par moteur électrique - Essais, détermination des performances et exigences pour le marquage des appareils pour eau chaude sanitaire
01/12/2022 - Papier - Français -
En savoir plus130,67 € -
DIN EN ISO 10298:2022-12
Gas cylinders - Gases and gas mixtures - Determination of toxicity for the selection of cylinder valve outlets (ISO 10298:2018 + Amd 1:2021), German version EN ISO 10298:2020 + A1:2022
01/12/2022 - PDF - Allemand -
En savoir plus79,72 € -
NF EN ISO 9809-4, A49-901-4 (12/2022)
Bouteilles à gaz - Conception, construction et essais des bouteilles à gaz et des tubes rechargeables en acier sans soudure - Partie 4 : bouteilles en acier inoxydable ayant une valeur de Rm inférieure à 1 100 MPa
01/12/2022 - Papier - Français -
En savoir plus130,67 € -
DIN EN 14525:2022-12
Ductile iron and steel wide tolerance couplings and flange adaptors for use with pipes of different materials: ductile iron, Grey iron, steel, PVC-U, PVC-O, PE, fibre-cement, German version EN 14525:2022.
01/12/2022 - PDF - Allemand -
En savoir plus104,95 € -
DIN 86089:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Concentric reducers
01/12/2022 - PDF - Allemand -
En savoir plus72,80 € -
ASTM D2992-22 + Redline
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
01/12/2022 - PDF - Anglais -
En savoir plus65,00 € -
22/30454754 DC:2022
BS EN ISO 11114-1:2020 AMD1. Gas cylinders. Compatibility of cylinder and valve materials with gas contents Part 1. Metallic
01/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
DIN EN ISO 23632:2022-12
Industrial valves - Design validation-testing of valves (ISO 23632:2021), German version EN ISO 23632:2022
01/12/2022 - PDF - Allemand -
En savoir plus85,79 € -
22/30462458 DC:2022
BS EN 1092-1:2018 AMD1. Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Part 1. Steel
01/12/2022 - PDF - Anglais -
En savoir plus24,00 € -
DIN EN 1092-1/A1:2022-12
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 1: Steel flanges, German and English version EN 1092-1:2018/A1:2022
01/12/2022 - PDF - Anglais, Allemand -
En savoir plus99,35 € -
DIN 86087:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Saddle type connections
01/12/2022 - PDF - Allemand -
En savoir plus65,89 € -
VG 95955-5:2022-12
Hoses for fuelling and pipelines - Part 5: Marking procedures for hoses and hose assemblies, Text in German and English
01/12/2022 - PDF - Anglais, Allemand -
En savoir plus65,89 € -
NF EN 17800, A48-800 (12/2022)
Coût du cycle de vie (CCV) et analyse du cycle de vie (ACV) pour les émissions de CO2 dans les systèmes de canalisations en fonte ductile
01/12/2022 - Papier - Français -
En savoir plus86,67 € -
NF EN 16147/IN1, E38-115/IN1 (12/2022)
Pompes à chaleur avec compresseur entraîné par moteur électrique - Essais, détermination des performances et exigences pour le marquage des appareils pour eau chaude sanitaire
01/12/2022 - Papier - Français -
En savoir plus54,50 € -
NF M88-781 (12/2022)
Installations d'hydrocarbures liquéfiés - Détendeurs, inverseurs automatiques, ayant une pression maximum de détente de 4 bar, avec une capacité maximale de 150 kg/h, dispositifs de sécurité associés et adaptateurs pour butane, propane et leurs mélanges - Application de la norme EN 16129:2013
01/12/2022 - Papier - Français -
En savoir plus75,67 € -
DIN EN ISO 11114-6:2022-12
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022), German version EN ISO 11114-6:2022
01/12/2022 - PDF - Allemand -
En savoir plus72,80 € -
NF EN 15218, E38-118 (12/2022)
Climatiseurs et groupes refroidisseurs de liquide à condenseur refroidi par évaporation et compresseur entraîné par moteur électrique pour la réfrigération des locaux - Termes, définitions, conditions d'essai, méthodes d'essai et exigences
01/12/2022 - Papier - Français -
En savoir plus75,67 € -
DIN EN 17176-2:2022-12
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes, German version EN 17176-2:2019+A1:2022.
01/12/2022 - PDF - Allemand -
En savoir plus99,35 € -
CEN/TS 17152-3:2022
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Boxes used for infiltration, attenuation and storage systems - Part 3: Conformity assessment scheme
01/12/2022 - PDF - Anglais -
En savoir plus89,00 € -
DIN EN 13483:2022-12
Rubber and plastic hoses and hose assemblies with internal vapour recovery for measured fuel dispensing systems - Specification, German version EN 13483:2022
01/12/2022 - PDF - Allemand -
En savoir plus110,00 € -
DIN 86088:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Tees
01/12/2022 - PDF - Allemand -
En savoir plus72,80 € -
DIN EN 13799:2022-12
LPG equipment and accessories - Contents gauges for Liquefied Petroleum Gas (LPG) pressure vessels, German version EN 13799:2022
01/12/2022 - PDF - Allemand -
En savoir plus110,00 € -
NF EN 1455-1, T54-914-1 (12/2022)
Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
01/12/2022 - Papier - Français -
En savoir plus108,33 € -
NF EN 1854, D36-390 (12/2022)
Equipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de surveillance de pression pour brûleurs à gaz et appareils à gaz
01/12/2022 - Papier - Français -
En savoir plus130,67 € -
DIN EN ISO 11295:2022-12
Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022), German version EN ISO 11295:2022
01/12/2022 - PDF - Allemand -
En savoir plus163,74 € -
DIN EN 15714-3:2022-12
Industrial valves - Actuators - Part 3: Pneumatic part-turn actuators for industrial valves - Basic requirements, German version EN 15714-3:2022
01/12/2022 - PDF - Allemand -
En savoir plus92,62 € -
NF ISO 12151-2, E48-079-2 (12/2022)
Raccordements pour transmissions hydrauliques et applications générales - Flexibles de raccordement - Partie 2 : Flexibles avec embouts à cône à 24 degrés et joints toriques conformes à l'ISO 8434-1
01/12/2022 - Papier - Français -
En savoir plus75,67 € -
DIN 86090:2022-12
Fittings for butt welding into copper-nickel-alloy pipelines - Elbows
01/12/2022 - PDF - Allemand -
En savoir plus59,63 € -
BS EN 16678:2022 + Redline
Tracked Changes. Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
01/12/2022 - PDF - Anglais -
En savoir plus454,00 € -
ASTM D2992-22
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
01/12/2022 - PDF - Anglais -
En savoir plus54,00 € -
NF EN 13110, M88-728 (12/2022)
Equipements pour gaz de pétrole liquéfiés et leurs accessoires - Bouteilles soudées transportables et rechargeables en aluminium pour gaz de pétrole liquéfié (GPL) - Conception et construction
01/12/2022 - Papier - Français -
En savoir plus108,33 € -
NF EN 1566-1, T54-919-1 (12/2022)
Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : spécifications pour tubes, raccords ainsi que pour le système
01/12/2022 - Papier - Français -
En savoir plus108,33 € -
UNE-EN ISO 3459:2022
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
30/11/2022 - PDF - Anglais -
En savoir plus69,60 € -
UNE-EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
30/11/2022 - PDF - Anglais -
En savoir plus81,60 € -
BS EN 15969-1:2022
Tanks for transport of dangerous goods. Digital interface the data transfer between tank vehicle and with stationary facilities Protocol specification. Control, measurement event
30/11/2022 - PDF - Anglais -
En savoir plus398,00 € -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
30/11/2022 - PDF - Espagnol -
En savoir plus95,00 € -
UNE-EN ISO 3459:2022
Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under negative pressure (ISO 3459:2022)
30/11/2022 - PDF - Espagnol -
En savoir plus58,00 € -
UNE-EN ISO 4671:2022
Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2022)
30/11/2022 - PDF - Espagnol -
En savoir plus68,00 € -
UNE-EN 558:2022
Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves
30/11/2022 - PDF - Anglais -
En savoir plus114,00 € -
BS EN ISO 1179-2:2022 + Redline
Tracked Changes. Connections for general use and fluid power. Ports stud ends with ISO 228-1 threads elastomeric or metal-to-metal sealing Heavy-duty (S series) light-duty (L (type E)
30/11/2022 - PDF - Anglais -
En savoir plus235,00 € -
BS EN 16678:2022
Safety and control devices for gas burners and gas burning appliances. Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
29/11/2022 - PDF - Anglais -
En savoir plus348,00 € -
BS EN 1643:2022 + Redline
Tracked Changes. Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Valve proving systems for automatic shut-off valves
29/11/2022 - PDF - Anglais -
En savoir plus396,00 € -
BS EN 12889:2022
Trenchless construction and testing of drains and sewers
29/11/2022 - PDF - Anglais -
En savoir plus348,00 € -
BS EN ISO 1179-2:2022
Connections for general use and fluid power. Ports stud ends with ISO 228-1 threads elastomeric or metal-to-metal sealing Heavy-duty (S series) light-duty (L (type E)
25/11/2022 - PDF - Anglais -
En savoir plus180,00 € -
250,00 €
-
NBN EN ISO 1179-2:2022
Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (ISO 1179-2:2022)
24/11/2022 - PDF - Anglais -
En savoir plus58,00 € -
BS EN 12067-2:2022
Safety and control devices for burners appliances burning gaseous or liquid fuels. Control functions in electronic systems Fuel/air ratio control/supervision of the type
24/11/2022 - PDF - Anglais -
En savoir plus377,00 € -
NBN EN ISO 1179-2:2022
Leitungsanschlüsse für allgemeine Anwendung und Fluidtechnik - Einschraublöcher und Einschraubzapfen mit Gewinde nach ISO 228-1 und Elastomerdichtung oder metallener Dichtkante - Teil 2: Einschraubzapfen mit Elastomerdichtung (Form E), schwere (S) und leichte Reihe (L) (ISO 1179-2:2022)
24/11/2022 - PDF - Allemand -
En savoir plus58,00 € -
NBN EN ISO 1179-2:2022
Raccordements pour applications générales et transmissions hydrauliques et pneumatiques - Orifices et éléments mâles à filetage ISO 228-1 à joint en élastomère ou étanchéité métal sur métal - Partie 2: Éléments mâles de séries légère (série L) et lourde (série S) avec joint en élastomère (type E) (ISO 1179-2:2022)
24/11/2022 - PDF - Français -
En savoir plus58,00 € -
22/30423707 DC:2022
BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
22/11/2022 - PDF - Anglais -
En savoir plus24,00 € -
BS EN 1643:2022
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Valve proving systems for automatic shut-off valves
21/11/2022 - PDF - Anglais -
En savoir plus331,00 € -
BS EN 60335-2-65:2003+A12:2022
Household and similar electrical appliances. Safety Particular requirements for air-cleaning appliances
18/11/2022 - PDF - Anglais -
En savoir plus250,00 € -
BS ISO 11515:2022
Gas cylinders. Refillable composite reinforced tubes of water capacity between 450 L and 3000 L. Design, construction and testing
17/11/2022 - PDF - Anglais -
En savoir plus348,00 € -
BS EN 88-3:2022
Safety and control devices for gas burners burning appliances Pressure and/or flow rate regulators inlet pressures up to including 500 kPa, electronic types
17/11/2022 - PDF - Anglais -
En savoir plus348,00 € -
NBN EN 12067-2:2022
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control/supervision of the electronic type
16/11/2022 - PDF - Anglais -
En savoir plus184,00 € -
NBN EN 12067-2:2022
Sicherheits- und Regeleinrichtungen für Brenner und Brennstoffgeräte für gasförmige oder flüssige Brennstoffe - Regel- und Steuerfunktionen in elektronischen Systemen - Teil 2: Elektronische Gas-Luft-Verbundregel- und Überwachungseinrichtungen
16/11/2022 - PDF - Allemand -
En savoir plus184,00 €