23 : Fluidique et composants à usage général
-
24/30477132 DC:2024
BS ISO 6362-6 Wrought aluminium and alloys. Extruded rods/bars, tubes profiles Part 6. Tolerances on form dimensions for round, square, rectangular hexagonal
07/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
NBN EN ISO 7510:2024
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
07/02/2024 - PDF - Français - NBN
En savoir plus89,00 € -
NBN EN ISO 7510:2024
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
07/02/2024 - PDF - Allemand - NBN
En savoir plus89,00 € -
NBN EN ISO 7510:2024
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
07/02/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
BS ISO 10302-1:2024
Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne measurement
06/02/2024 - PDF - Anglais - BSI
En savoir plus331,00 € -
ASTM F2769-24
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F2769-24 + Redline
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
API RP 574:2024
Inspection Practices for Piping System Components, Fifth Edition
01/02/2024 - PDF sécurisé - Anglais - API
En savoir plus268,00 € -
API 570:2024
Piping Inspection Code: In-service Inspection, Rating, Repair, and Alteration of Piping Systems, Fifth Edition
01/02/2024 - PDF sécurisé - Anglais - API
En savoir plus230,00 € -
DIN EN 161:2024-02
Automatic shut-off valves for gas burners and gas appliances, German version EN 161:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus148,04 € -
DIN EN 1993-4-2:2024-02
Eurocode 3 - Design of steel structures - Part 4-2: Tanks, German and English version prEN 1993-4-2:2024
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus169,25 € -
ASTM C1613-24
Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM C1613-24 + Redline
Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
PR NF E86-257, E86-257PR (02/2024)
Réservoirs de stockage cylindriques verticaux fabriqués et montés en usine
01/02/2024 - Papier - Français - AFNOR
En savoir plus74,00 € -
DIN EN 14025:2024-02
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction, German version EN 14025:2023
01/02/2024 - PDF - Allemand - DIN
En savoir plus136,82 € -
DIN EN 16678:2024-02
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6300 kPa, German version EN 16678:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus120,84 € -
DIN EN 88-3:2024-02
Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types, German version EN 88-3:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus126,26 € -
DIN EN 88-2:2024-02
Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa, German version EN 88-2:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus148,04 € -
DIN EN 1106:2024-02
Manually operated taps for gas burning appliances, German version EN 1106:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus115,33 € -
DIN EN 88-1:2024-02
Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa, German version EN 88-1:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus136,82 € -
DIN EN 16304:2024-02
Automatic vent valves for gas burners and gas burning appliances, German version EN 16304:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus115,33 € -
DIN EN 1643:2024-02
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Valve proving systems for automatic shut-off valves, German version EN 1643:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus115,33 € -
DIN EN 12067-2:2024-02
Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Part 2: Fuel/air ratio control /supervision of the electronic type, German version EN 12067-2:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus158,04 € -
DIN EN 1854:2024-02
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances, German version EN 1854:2022.
01/02/2024 - PDF - Allemand - DIN
En savoir plus136,82 € -
DIN EN ISO 7866/A2:2024-02
Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/DAM 2:2024), German and English version EN ISO 7866:2021/prA2:2024
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus39,35 € -
PR NF EN ISO 11118, E29-695PR (02/2024)
Bouteilles à gaz - Bouteilles à gaz métalliques non rechargeables - Spécifications et méthodes d'essai
01/02/2024 - Papier - Anglais, Français - AFNOR
En savoir plus115,50 € -
24/30464957 DC:2024
BS ISO 7368 Hydraulic fluid power - Two-port slip-in cartridge valves - Cavities
01/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
PR NF EN 12900, E35-409PR (02/2024)
Compresseurs pour fluides frigorigènes - Conditions de détermination des caractéristiques, tolérances et présentation des performances par le fabricant
01/02/2024 - Papier - Anglais, Français - AFNOR
En savoir plus80,50 € -
24/30483348 DC:2024
BS EN 12583:2022/A1 Gas Infrastructure - Compressor stations - Functional requirements
01/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
DIN 16833:2024-02
Polyethylene pipes of raised temperature resistance (PE-RT) - PE-RT Type I and PE-RT Type II - General quality requirements, testing, Text in German and English
01/02/2024 - PDF - Anglais, Allemand - DIN
En savoir plus72,80 € -
NF EN ISO 7510, T57-210 (02/2024)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants
01/02/2024 - Papier - Français - AFNOR
En savoir plus48,00 € -
ASTM F877-24
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F877-24 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM F714-24
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F714-24 + Redline
Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM F3253-24
Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F3253-24 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM F876-24
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F876-24 + Redline
Standard Specification for Crosslinked Polyethylene (PEX) Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM F1871-24
Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F1871-24 + Redline
Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM F1281-24
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F1281-24 + Redline
Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM D2924-24
Standard Test Method for External Pressure Resistance of “Fiberglass”(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus52,00 € -
ASTM D2924-24 + Redline
Standard Test Method for External Pressure Resistance of “Fiberglass”(Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM F3346-24
Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F3346-24 + Redline
Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM F2623-24e1
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
01/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F2623-24e1 + Redline
Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications
01/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM D3261-24
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM D3261-24 + Redline
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
PR NF EN 10284, E29-802PR (02/2024)
Raccords en fonte malléable avec extrémités à compression pour systèmes de canalisation en polyéthylène (PE)
01/02/2024 - Papier - Anglais, Français - AFNOR
En savoir plus97,50 € -
ASTM F1733-24
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F1733-24 + Redline
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
DIN 28122:2024-02
Blank flanges with stainless steel facing, of nominal sizes DN 125 to DN 500 and PN designations PN 10 to PN 40
01/02/2024 - PDF - Allemand - DIN
En savoir plus45,98 € -
DIN 3903:2024-02
Non soldering compression fittings with cutting ring - Elbow stud with taper threaded stud end (not for new design)
01/02/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN 3913:2024-02
Non soldering compression fittings with cutting ring - Run T-stud with taper threaded stud end (not for new design)
01/02/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN 3906:2024-02
Non soldering compression fittings with cutting ring - Branch T-stud with taper threaded stud end (not for new design)
01/02/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN 3900:2024-02
Non soldering compression fittings with cutting ring series LL - Straight studs with taper thread
01/02/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN 19938:2024-02
Seals for socket joints in ductile iron or steel pipelines for water supply - Requirements and tests
01/02/2024 - PDF - Allemand - DIN
En savoir plus79,72 € -
ASTM G8-24
Standard Test Methods for Cathodic Disbonding of Coated Steel
01/02/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM G8-24 + Redline
Standard Test Methods for Cathodic Disbonding of Coated Steel
01/02/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
NBN EN 12201-4:2024
Systèmes de canalisations en plastique pour l’alimentation en eau et pour les branchements et les collecteurs d’assainissement avec pression - Polyéthylène (PE) - Partie 4 : Robinets pour les systèmes d’alimentation en eau
31/01/2024 - PDF - Français - NBN
En savoir plus142,00 € -
NBN EN 12201-4:2024
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 4: Armaturen für Wasserversorgungssysteme
31/01/2024 - PDF - Allemand - NBN
En savoir plus142,00 € -
NBN EN 12201-4:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
31/01/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
UNE-EN 14432:2024
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
31/01/2024 - PDF - Espagnol - AENOR
En savoir plus60,00 € -
UNE-EN 14432:2024
Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves
31/01/2024 - PDF - Anglais - AENOR
En savoir plus72,00 € -
24/30467644 DC:2024
BS EN ISO 18984 Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements
31/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
2 279,00 €
-
2 279,00 €
-
NBN EN 12201-5:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 5 : Aptitude à l'emploi du système
31/01/2024 - PDF - Français - NBN
En savoir plus89,00 € -
NBN EN 12201-3:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords
31/01/2024 - PDF - Français - NBN
En savoir plus163,00 € -
NBN EN 12201-2:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : Tubes
31/01/2024 - PDF - Français - NBN
En savoir plus142,00 € -
NBN EN 12201-1:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 1: Généralités
31/01/2024 - PDF - Français - NBN
En savoir plus142,00 € -
NBN EN 12201-5:2024
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 5: Gebrauchstauglichkeit des Systems
31/01/2024 - PDF - Allemand - NBN
En savoir plus89,00 € -
NBN EN 12201-2:2024
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 2: Rohre
31/01/2024 - PDF - Allemand - NBN
En savoir plus142,00 € -
NBN EN 12201-1:2024
Kunststoff-Rohrleitungssysteme für die Wasserversorgung und für Entwässerungs- und Abwasserdruckleitungen - Polyethylen (PE) - Teil 1: Allgemeines
31/01/2024 - PDF - Allemand - NBN
En savoir plus142,00 € -
NBN EN 12201-5:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
31/01/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
NBN EN 12201-3:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
31/01/2024 - PDF - Anglais - NBN
En savoir plus163,00 € -
NBN EN 12201-2:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
31/01/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
NBN EN 12201-1:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
31/01/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
IEC 60335-2-41:2024
IEC 60335-2-41:2024 Appareils électrodomestiques et analogues - Sécurité - Partie 2-41: Exigences particulières pour les pompes
30/01/2024 - PDF - Anglais, Français - IEC
En savoir plus219,00 € -
IEC 60335-2-41:2024 CMV
IEC 60335-2-41:2024 CMV Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
30/01/2024 - PDF - Anglais - IEC
En savoir plus437,00 € -
IEC 60335-2-41:2024 EXV
IEC 60335-2-41:2024 EXV Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
30/01/2024 - PDF - Anglais - IEC
En savoir plus871,00 € -
IEC 60335-2-41-EXV-CMV:2024
IEC 60335-2-41-EXV-CMV:2024 Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps
30/01/2024 - PDF - Anglais - IEC
En savoir plus1 176,00 € -
24/30468772 DC:2024
BS ISO 11237 Rubber hoses and hose assemblies - Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids -Specification
30/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30478022 DC:2024
BS EN ISO 7866:2012/Amd 2 Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing. Amendment 2
29/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30466864 DC:2024
BS ISO 5222-3 Heat recovery ventilators and energy -Testing calculating methods for seasonal performance factor Part 3: Annual sensible heating cooling of heat
26/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
BS EN 14025:2023 + Redline
Tracked Changes. Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
25/01/2024 - PDF - Anglais - BSI
En savoir plus454,00 € -
NBN ISO 12829:2024
Hydraulic spin-on filters with finite lives — Method for verifying the rated fatigue life and the rated static burst pressure of the pressure-containing envelope ISO 12829:2023
25/01/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
BS ISO 6953-1:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
22/01/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
BS ISO 6953-2:2024 + Redline
Tracked Changes. Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
22/01/2024 - PDF - Anglais - BSI
En savoir plus432,00 € -
BS EN 1854:2022+A1:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. Pressure sensing devices for gas burners and gas burning appliances
19/01/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
IEC 63086-2-1:2024
IEC 63086-2-1:2024 Appareils d'épuration d'air électriques domestiques et appareils similaires - Méthodes de mesure de l'aptitude à la fonction - Partie 2-1: Exigences particulières pour la détermination de la réduction des particules
19/01/2024 - PDF - Anglais, Français - IEC
En savoir plus270,00 € -
BS EN 751-3:2022+A1:2023
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases hot water Unsintered PTFE tapes strings
19/01/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS ISO 6953-2:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Test methods to determine the main characteristics include in supplier’s literature
18/01/2024 - PDF - Anglais - BSI
En savoir plus331,00 € -
PD CEN/TR 16395:2023 + Redline
Tracked Changes. Gas Infrastructure. CEN/TC 234 Pressure Definitions. Guideline Document
17/01/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
BS ISO 6953-1:2024
Pneumatic fluid power. Compressed air pressure regulators and filter-regulators Main characteristics to include in supplier's literature product-marking requirements
17/01/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS ISO 21009-1:2022 + Redline
Tracked Changes. Cryogenic vessels. Static vacuum-insulated vessels Design, fabrication, inspection and tests
17/01/2024 - PDF - Anglais - BSI
En savoir plus586,00 € -
BS EN 253:2019+A1:2023
District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
12/01/2024 - PDF - Anglais - BSI
En savoir plus331,00 € -
331,00 €
-
BS EN 88-1:2022+A1:2023
Safety and control devices for gas burners burning appliances Pressure regulators inlet pressures up to including 50 kPa
12/01/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
BS EN 14025:2023
Tanks for the transport of dangerous goods. Metallic pressure tanks. Design and construction
04/01/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
24/30484302 DC:2024
PD 5500:2024+A1:2024. Specification for unfired pressure vessels
03/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30465254 DC:2024
ISO 11118 Gas cylinders. Non-refillable metallic gas cylinders. Specification and test methods
02/01/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
PR NF EN 12100, T54-930PR (01/2024)
Systèmes de canalisations en plastiques - Robinets en polyéthylène (PE) - Méthode d'essai de résistance à la flexion entre supports
01/01/2024 - Papier - Anglais, Français - AFNOR
En savoir plus56,00 € -
PR NF EN 1680, T54-920PR (01/2024)
Systèmes de canalisations en plastique - Robinets pour les systèmes de canalisations en polyéthylène (PE) - Méthode d'essai d'étanchéité sous et après une flexion appliquée au mécanisme d'entraînement
01/01/2024 - Papier - Anglais, Français - AFNOR
En savoir plus56,00 € -
FD CEN/TR 16395, M50-033 (01/2024)
Infrastructures gazières - Définitions des pressions du CEN/TC 234 - Lignes directrices
01/01/2024 - Papier - Français - AFNOR
En savoir plus60,67 € -
DIN ISO 8133:2024-01
Hydraulic fluid power - Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (ISO 8133:2022)
01/01/2024 - PDF - Allemand - DIN
En savoir plus79,72 € -
DIN 16263:2024-01
PN 16 cocks with adjusting nut and male connection and test connection for pressure gauges
01/01/2024 - PDF - Allemand - DIN
En savoir plus45,98 € -
ASTM C118/C118M-24
Standard Specification for Concrete Pipe for Irrigation or Drainage
01/01/2024 - PDF - Anglais - ASTM
En savoir plus52,00 € -
ASTM C118/C118M-24 + Redline
Standard Specification for Concrete Pipe for Irrigation or Drainage
01/01/2024 - PDF - Anglais - ASTM
En savoir plus63,00 € -
DIN ISO 12151-3:2024-01
Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2021)
01/01/2024 - PDF - Allemand - DIN
En savoir plus72,80 € -
PR NF EN 17533, E29-700PR (01/2024)
Hydrogène gazeux - Bouteilles et tubes pour stockage stationnaire
01/01/2024 - Papier - Anglais, Français - AFNOR
En savoir plus148,00 € -
AD 2000-Merkblatt B 5:2024-01
Design of pressure vessels - Unstayed and stayed flat ends and plates
01/01/2024 - PDF - Allemand - VDTUV
En savoir plus82,59 € -
AD 2000-Merkblatt B 5:2024-01
Design of pressure vessels - Unstayed and stayed flat ends and plates
01/01/2024 - PDF - Anglais - VDTUV
En savoir plus119,13 € -
AD 2000-Merkblatt HP 5/2:2024-01
Manufacture and testing of pressure vessels - Manufacture and testing of joints - Production testing of welds, testing of the parent metal after post-weld heat treatment
01/01/2024 - PDF - Allemand - VDTUV
En savoir plus16,35 € -
AD 2000-Merkblatt HP 5/2:2024-01
Manufacture and testing of pressure vessels - Manufacture and testing of joints - Production testing of welds, testing of the parent metal after post-weld heat treatment
01/01/2024 - PDF - Anglais - VDTUV
En savoir plus23,38 € -
AD 2000-Merkblatt W 2:2024-01
Materials for pressure vessels - Austenitic and austenitic-ferritic steels
01/01/2024 - PDF - Allemand - VDTUV
En savoir plus28,04 € -
AD 2000-Merkblatt W 2:2024-01
Materials for pressure vessels - Austenitic and austenitic-ferritic steels
01/01/2024 - PDF - Anglais - VDTUV
En savoir plus40,50 € -
NF ISO 6953-1, E49-330-1 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtresrégulateurs pour air comprimé - Partie 1 : principales caractéristiques à inclure dans la documentation des fournisseurs et exigences de marquage du produit
01/01/2024 - Papier - Français - AFNOR
En savoir plus75,67 € -
NF ISO 6953-2, E49-330-2 (01/2024)
Transmissions pneumatiques - Régulateurs de pression et filtres régulateurs pour air comprimé - Partie 2 : méthodes d'essai pour déterminer les principales caractéristiques à inclure dans la documentation des fournisseurs
01/01/2024 - Papier - Français - AFNOR
En savoir plus108,33 € -
411,00 €
-
DIN EN ISO 11114-1:2024-01
Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020 + Amd 1:2023), German version EN ISO 11114-1:2020 + A1:2023
01/01/2024 - PDF - Allemand - DIN
En savoir plus141,96 € -
DIN EN ISO 11118:2024-01
Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO/DIS 11118:2023), German and English version prEN ISO 11118:2023
01/01/2024 - PDF - Anglais, Allemand - DIN
En savoir plus120,84 € -
DIN EN 12900:2024-01
Refrigerant compressors - Rating conditions, tolerances and presentation of performance data, German and English version prEN 12900:2023
01/01/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
DIN EN ISO 2505:2024-01
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023), German version EN ISO 2505:2023
01/01/2024 - PDF - Allemand - DIN
En savoir plus65,89 € -
DIN EN 10284:2024-01
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems, German and English version prEN 10284:2023
01/01/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
ASTM C1840/C1840M-24
Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
01/01/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM C1840/C1840M-24 + Redline
Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
01/01/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM C1903-24
Standard Specification for Precast Concrete Duct Bank
01/01/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM C1903-24 + Redline
Standard Specification for Precast Concrete Duct Bank
01/01/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
DIN 30670-1:2024-01
Polyethylen coatings of steel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings.
01/01/2024 - PDF - Allemand - DIN
En savoir plus115,33 € -
DIN 30670-2:2024-01
Polyethylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings.
01/01/2024 - PDF - Allemand - DIN
En savoir plus120,84 € -
DIN 30678-1:2024-01
Polypropylen coatings of steel pipes and fittings - Part 1: Requirements and testings of factory-applied extruded coatings.
01/01/2024 - PDF - Allemand - DIN
En savoir plus110,00 € -
DIN 30678-2:2024-01
Polypropylen coatings of steel pipes and fittings - Part 2: Requirements and testings of factory-applied sintered or flame sprayed coatings.
01/01/2024 - PDF - Allemand - DIN
En savoir plus110,00 € -
DIN 30340-2:2024-01
Coatings for mechanical protection of buried or submerged pipelines - Part 2: Quality assurance for field coatings
01/01/2024 - PDF - Allemand - DIN
En savoir plus79,72 € -
428,00 €
-
UNE-EN 15001-1:2023
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
27/12/2023 - PDF - Espagnol - AENOR
En savoir plus156,00 € -
UNE-EN 15001-1:2023
Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
27/12/2023 - PDF - Anglais - AENOR
En savoir plus187,20 € -
UNE-EN 161:2023
Automatic shut-off valves for gas burners and gas appliances
27/12/2023 - PDF - Espagnol - AENOR
En savoir plus114,00 € -
UNE-EN 161:2023
Automatic shut-off valves for gas burners and gas appliances
27/12/2023 - PDF - Anglais - AENOR
En savoir plus136,80 € -
UNE 36224-1:2023
Non-alloy steel tubes and accessories for the conveyance of aqueous liquids, including water for human consumption. Simplified criteria for classification by pressure classes. Part 1: Tubes
27/12/2023 - PDF - Espagnol - AENOR
En savoir plus52,00 € -
UNE-EN 16304:2023
Automatic vent valves for gas burners and gas burning appliances
27/12/2023 - PDF - Espagnol - AENOR
En savoir plus89,00 € -
UNE-EN 16304:2023
Automatic vent valves for gas burners and gas burning appliances
27/12/2023 - PDF - Anglais - AENOR
En savoir plus106,80 € -
UNE-ISO 23991:2023
Irrigation applications of ductile iron pipelines — Product design and installation.
27/12/2023 - PDF - Espagnol - AENOR
En savoir plus82,00 € -
SAE J 518/2:2023-12-26
Hydraulic Flanged Tube, Pipe, and Hose Connections, Four-Screw Flange Connection - Part 2: 42 MPa (Code 62)
26/12/2023 - PDF - Anglais - SAE
En savoir plus111,00 € -
NBN EN 14025:2023
Citernes pour le transport de matières dangereuses - Citernes métalliques sous pression - Conception et construction
21/12/2023 - PDF - Français - NBN
En savoir plus184,00 € -
NBN EN 14025:2023
Tanks für die Beförderung gefährlicher Güter - Metallische Drucktanks - Auslegung und Bau
21/12/2023 - PDF - Allemand - NBN
En savoir plus184,00 € -
NBN EN 14025:2023
Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction
21/12/2023 - PDF - Anglais - NBN
En savoir plus184,00 € -
NBN EN 253:2019+A1:2023
Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
21/12/2023 - PDF - Français - NBN
En savoir plus163,00 € -
NBN EN 253:2019+A1:2023
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made pipe assembly of steel service pipe, polyurethane thermal insulation and a casing of polyethylene
21/12/2023 - PDF - Anglais - NBN
En savoir plus163,00 € -
22/30448508 DC:2023
BS EN 10284. Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
21/12/2023 - PDF - Anglais - BSI
En savoir plus24,00 € -
23/30484963 DC:2023
Draft BS EN 10284. Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
21/12/2023 - PDF - Anglais - BSI
En savoir plus24,00 € -
UNE-EN 1455-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus86,00 € -
UNE-EN 1455-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
20/12/2023 - PDF - Anglais - AENOR
En savoir plus103,20 € -
UNE-EN 1566-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus89,00 € -
UNE-EN 1566-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
20/12/2023 - PDF - Anglais - AENOR
En savoir plus106,80 € -
UNE-EN 1106:2023
Manually operated taps for gas burning appliances
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus85,00 € -
102,00 €
-
UNE-EN 16678:2023
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus95,00 € -
UNE-EN 16678:2023
Safety and control devices for gas burners and gas burning appliances - Automatic shut-off valves for operating pressure of above 500 kPa up to and including 6 300 kPa
20/12/2023 - PDF - Anglais - AENOR
En savoir plus114,00 € -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus76,00 € -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
20/12/2023 - PDF - Anglais - AENOR
En savoir plus91,20 € -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus85,00 € -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
20/12/2023 - PDF - Anglais - AENOR
En savoir plus102,00 € -
UNE-ISO 13953:2023
Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint.
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus52,00 € -
UNE-EN 14420-7:2023/AC:2023
Hose fittings with clamp units - Part 7: Cam locking couplings
20/12/2023 - PDF - Espagnol - AENOR
En savoir plus0,00 € -
UNE-EN 14420-7:2023/AC:2023
Hose fittings with clamp units - Part 7: Cam locking couplings
20/12/2023 - PDF - Anglais - AENOR
En savoir plus0,00 € -
SAE AS 1291B:2023-12-20
SLEEVE, HOSE ASSEMBLY, CHAFE GUARD, TFE OR FEP (Stabilized: Dec 2023)
20/12/2023 - PDF - Anglais - SAE
En savoir plus54,00 € -
NBN ISO 12759-1:2023
Ventilateurs — Classification du rendement des ventilateurs — Partie 1: Exigences générales ISO 12759-1:2023
19/12/2023 - PDF - Français - NBN
En savoir plus121,00 € -
NBN ISO 12759-1:2023
Fans — Efficiency classification for fans — Part 1: General requirements ISO 12759-1:2023
19/12/2023 - PDF - Anglais - NBN
En savoir plus121,00 € -
NBN ISO 5222-1:2023
Heat recovery ventilators and energy recovery ventilators — Testing and calculating methods for seasonal performance factor — Part 1: Sensible heating recovery seasonal performance factors of heat recovery ventilators (HRV) ISO 5222-1:2023
19/12/2023 - PDF - Anglais - NBN
En savoir plus142,00 € -
23/30479278 DC:2023
Draft BS EN 12900 Refrigerant compressors.Rating conditions, tolerances and presentation of performance data
19/12/2023 - PDF - Anglais - BSI
En savoir plus24,00 € -
BS EN 17038-4:2023
Pumps. Methods of qualification the Energy Efficiency Index for rotodynamic pump units Testing and calculation energy efficiency index (EEI) submersible multistage
18/12/2023 - PDF - Anglais - BSI
En savoir plus293,00 € -
IEC 60335-2-51:2023
IEC 60335-2-51:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-51: Exigences particulières pour les pompes de circulation fixes pour installations de chauffage et de distribution d'eau
14/12/2023 - PDF - Anglais, Français - IEC
En savoir plus92,00 € -
BS EN IEC 60335-2-51:2023+A11:2023
Household and similar electrical appliances. Safety Particular requirements for stationary circulation pumps heating service water installations
14/12/2023 - PDF - Anglais - BSI
En savoir plus180,00 € -
IEC 60335-2-51:2023 CMV
IEC 60335-2-51:2023 CMV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
14/12/2023 - PDF - Anglais - IEC
En savoir plus158,00 € -
IEC 60335-2-51:2023 EXV
IEC 60335-2-51:2023 EXV Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
14/12/2023 - PDF - Anglais - IEC
En savoir plus768,00 € -
IEC 60335-2-51-EXV-CMV:2023
IEC 60335-2-51-EXV-CMV:2023 Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations
14/12/2023 - PDF - Anglais - IEC
En savoir plus863,00 € -
IEC 60335-2-65:2023
IEC 60335-2-65:2023 Appareils électrodomestiques et analogues - Sécurité - Partie 2-65: Exigences particulières pour les épurateurs d'air
14/12/2023 - PDF - Anglais, Français - IEC
En savoir plus132,00 € -
IEC 60335-2-65:2023 CMV
IEC 60335-2-65:2023 CMV Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
14/12/2023 - PDF - Anglais - IEC
En savoir plus225,00 € -
IEC 60335-2-65:2023 EXV
IEC 60335-2-65:2023 EXV Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
14/12/2023 - PDF - Anglais - IEC
En savoir plus768,00 € -
IEC 60335-2-65-EXV-CMV:2023
IEC 60335-2-65-EXV-CMV:2023 Household and similar electrical appliances - Safety - Part 2-65: Particular requirements for air-cleaning appliances
14/12/2023 - PDF - Anglais - IEC
En savoir plus895,00 € -
BS ISO 21360-6:2023
Vacuum technology. Standard methods for measuring vacuum-pump performance Cryogenic vacuum pumps
14/12/2023 - PDF - Anglais - BSI
En savoir plus180,00 € -
NBN EN 17038-4:2023
Pompes - Méthodes de qualification de l'indice de rendement des groupes motopompes rotodynamiques - Partie 4 : Essais et calcul de l'indice de rendement énergétique (EEI) pour les unités de pompage submersibles des forages
13/12/2023 - PDF - Français - NBN
En savoir plus163,00 € -
NBN EN 17038-4:2023
Pumpen - Methoden zur Qualifikation des Energieeffizienzindexes für Kreiselpumpen - Teil 4: Prüfung und Berechnung des Energieeffizienzindexes (EEI) mehrstufiger Tauchmotorpumpenaggregate
13/12/2023 - PDF - Allemand - NBN
En savoir plus163,00 € -
NBN EN 17038-4:2023
Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units
13/12/2023 - PDF - Anglais - NBN
En savoir plus163,00 € -
NBN EN 1854:2022+A1:2023
Equipements auxiliaires pour brûleurs et appareils utilisant des combustibles gazeux ou liquides - Dispositifs de surveillance de pression pour brûleurs et appareils à gaz
13/12/2023 - PDF - Français - NBN
En savoir plus184,00 € -
NBN EN 88-1:2022+A1:2023
Dispositifs de sécurité et de contrôle pour les brûleurs à gaz et appareils utilisant des combustibles gazeux - Partie 1 : Régulateurs de pression pour pression amont inférieure ou égale à 50 kPa
13/12/2023 - PDF - Français - NBN
En savoir plus184,00 € -
163,00 €
-
NBN EN 1854:2022+A1:2023
Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances
13/12/2023 - PDF - Anglais - NBN
En savoir plus184,00 € -
NBN EN 88-1:2022+A1:2023
Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
13/12/2023 - PDF - Anglais - NBN
En savoir plus184,00 € -
163,00 €
-
BS EN 1092-2:2023 + Redline
Tracked Changes. Flanges and their joints. Circular flanges for pipes, valves, fittings accessories, PN designated Cast iron
13/12/2023 - PDF - Anglais - BSI
En savoir plus431,00 € -
NBN EN 751-3:2022+A1:2023
Matériaux d'étanchéité pour raccords filetés en contact des gaz de la 1ère, 2ème et 3ème famille et de l'eau chaude - Partie 3 : Bandes et cordons en PTFE non fritté
13/12/2023 - PDF - Français - NBN
En savoir plus121,00 € -
NBN EN 751-3:2022+A1:2023
Dichtmittel für metallene Gewindeverbindungen in Kontakt mit Gasen der 1., 2. und 3. Familie und Heißwasser - Teil 3: Ungesinterte PTFE-Bänder und -Fäden
13/12/2023 - PDF - Allemand - NBN
En savoir plus121,00 € -
NBN EN 751-3:2022+A1:2023
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings
13/12/2023 - PDF - Anglais - NBN
En savoir plus121,00 € -
BS EN 549:2019+A1:2023
Rubber materials for seals and diaphragms for gas appliances and gas equipment
12/12/2023 - PDF - Anglais - BSI
En savoir plus293,00 € -
NBN ISO 5352-1:2023
Transmissions hydrauliques — Détermination du débit de décharge et des pertes thermiques des accumulateurs hydro-pneumatiques — Partie 1: Méthode d'essai ISO 5352-1:2023
11/12/2023 - PDF - Français - NBN
En savoir plus121,00 €