23.040.45 : Raccords en matières plastiques
-
BS EN 12201-3:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
10/04/2024 - PDF - Anglais -
En savoir plus432,00 € -
BS ISO 10928:2024 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
03/04/2024 - PDF - Anglais -
En savoir plus326,00 € -
ASTM F439-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais -
En savoir plus60,00 € -
ASTM F437-24
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais -
En savoir plus60,00 € -
ASTM F2618-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
01/04/2024 - PDF - Anglais -
En savoir plus71,00 € -
ASTM F439-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais -
En savoir plus71,00 € -
DIN EN 16903:2024-04
Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16903:2024
01/04/2024 - PDF - Anglais, Allemand -
En savoir plus104,95 € -
ASTM F437-24 + Redline
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais -
En savoir plus71,00 € -
ASTM F2618-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
01/04/2024 - PDF - Anglais -
En savoir plus60,00 € -
DIN EN 16904:2024-04
Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16904:2024
01/04/2024 - PDF - Anglais, Allemand -
En savoir plus99,35 € -
24/30488704 DC:2024
BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
28/03/2024 - PDF - Anglais -
En savoir plus24,00 € -
24/30484766 DC:2024
BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
28/03/2024 - PDF - Anglais -
En savoir plus24,00 € -
BS ISO 10928:2024
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
22/03/2024 - PDF - Anglais -
En savoir plus250,00 € -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20/03/2024 - PDF - Anglais -
En savoir plus105,60 € -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20/03/2024 - PDF - Espagnol -
En savoir plus88,00 € -
BS EN 12201-3:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
14/03/2024 - PDF - Anglais -
En savoir plus331,00 € -
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
22/02/2024 - PDF - Anglais -
En savoir plus151,00 € -
24/30434673 DC:2024
BS ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
12/02/2024 - PDF - Anglais -
En savoir plus24,00 € -
NBN EN ISO 7510:2024
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants (ISO 7510:2017)
07/02/2024 - PDF - Français -
En savoir plus89,00 € -
NBN EN ISO 7510:2024
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017)
07/02/2024 - PDF - Anglais -
En savoir plus89,00 € -
NBN EN ISO 7510:2024
Kunststoff-Rohrleitungssysteme - Teile aus glasfaserverstärkten Kunststoffen (GFK) - Ermittlung der Gehalte von Bestandteilen (ISO 7510:2017)
07/02/2024 - PDF - Allemand -
En savoir plus89,00 € -
ASTM D3261-24 + Redline
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais -
En savoir plus71,00 € -
ASTM F1733-24
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais -
En savoir plus60,00 € -
ASTM F1733-24 + Redline
Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais -
En savoir plus71,00 € -
ASTM D3261-24
Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
01/02/2024 - PDF - Anglais -
En savoir plus60,00 € -
NF EN ISO 7510, T57-210 (02/2024)
Systèmes de canalisations en matières plastiques - Composants plastiques renforcés de verre (PRV) - Détermination des teneurs des constituants
01/02/2024 - Papier - Français -
En savoir plus48,00 € -
NBN EN 12201-3:2024
Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : Raccords
31/01/2024 - PDF - Français -
En savoir plus163,00 € -
NBN EN 12201-3:2024
Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
31/01/2024 - PDF - Anglais -
En savoir plus163,00 € -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
20/12/2023 - PDF - Espagnol -
En savoir plus76,00 € -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
20/12/2023 - PDF - Anglais -
En savoir plus102,00 € -
UNE-EN 17176-2:2019+A1:2023
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 2: Pipes
20/12/2023 - PDF - Anglais -
En savoir plus91,20 € -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
20/12/2023 - PDF - Espagnol -
En savoir plus85,00 € -
DIN CEN/TS 1046:2023-12
Thermoplastics piping and ducting systems - Outside the building structures for gravity and pressurised systems - Trench installation, German version CEN/TS 1046:2021
01/12/2023 - PDF - Allemand -
En savoir plus84,02 € -
ASTM D2152-23 + Redline
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
01/11/2023 - PDF - Anglais -
En savoir plus63,00 € -
ASTM F2986-23 + Redline
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
01/11/2023 - PDF - Anglais -
En savoir plus71,00 € -
ASTM D2152-23
Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
01/11/2023 - PDF - Anglais -
En savoir plus52,00 € -
ASTM F2986-23
Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications
01/11/2023 - PDF - Anglais -
En savoir plus60,00 € -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
31/10/2023 - PDF - Espagnol -
En savoir plus60,00 € -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
31/10/2023 - PDF - Espagnol -
En savoir plus63,00 € -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
31/10/2023 - PDF - Espagnol -
En savoir plus57,00 € -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
31/10/2023 - PDF - Anglais -
En savoir plus72,00 € -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
31/10/2023 - PDF - Anglais -
En savoir plus75,60 € -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
31/10/2023 - PDF - Anglais -
En savoir plus68,40 € -
NBN ISO 4982:2023
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
17/10/2023 - PDF - Anglais -
En savoir plus163,00 € -
ASTM F1960-23b
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
01/09/2023 - PDF - Anglais -
En savoir plus54,00 € -
DIN EN ISO 13268:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022), German version EN ISO 13268:2023
01/09/2023 - PDF - Allemand -
En savoir plus72,80 € -
ASTM D3034-23 + Redline
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
01/09/2023 - PDF - Anglais -
En savoir plus72,00 € -
ASTM F1960-23b + Redline
Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
01/09/2023 - PDF - Anglais -
En savoir plus65,00 € -
DIN EN ISO 13266:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022), German version EN ISO 13266:2023
01/09/2023 - PDF - Allemand -
En savoir plus59,63 € -
DIN EN ISO 13267:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022), German version EN ISO 13267:2023
01/09/2023 - PDF - Allemand -
En savoir plus72,80 € -
ASTM D3034-23
Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
01/09/2023 - PDF - Anglais -
En savoir plus60,00 € -
ASTM D6041-23
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
01/08/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM D6041-23 + Redline
Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
01/08/2023 - PDF - Anglais -
En savoir plus65,00 € -
DIN EN 448:2023-08
District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene, German and English version prEN 448:2023
01/08/2023 - PDF - Anglais, Allemand -
En savoir plus110,00 € -
23/30476766 DC:2023
BS EN 448. District heating pipes. Bonded single pipe systems for directly buried hot water networks. Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of polyethylene
06/07/2023 - PDF - Anglais -
En savoir plus24,00 € -
PD ISO/TS 16422-3:2023
Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Fittings
05/07/2023 - PDF - Anglais -
En savoir plus250,00 € -
ASTM D2466-23
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
01/07/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM D2466-23 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
01/07/2023 - PDF - Anglais -
En savoir plus65,00 € -
23/30456312 DC:2023
BS ISO 10928. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
24/04/2023 - PDF - Anglais -
En savoir plus24,00 € -
ASTM F3524/F3524M-23
Standard Specification for Polyamide-12 (PA12) Line Pipe
01/04/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F438-23 + Redline
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
01/04/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F3348-23a
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/04/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2735-23
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
01/04/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F3524/F3524M-23 + Redline
Standard Specification for Polyamide-12 (PA12) Line Pipe
01/04/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F1866-23
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
01/04/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F3348-23a + Redline
Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/04/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F438-23
Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
01/04/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2735-23 + Redline
Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
01/04/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F1866-23 + Redline
Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
01/04/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F2159-23a
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/03/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2159-23a + Redline
Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/03/2023 - PDF - Anglais -
En savoir plus65,00 € -
DIN EN ISO 11296-9:2023-03
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
01/03/2023 - PDF - Allemand -
En savoir plus110,00 € -
PD CEN/TS 17176-3:2022 + Redline
Tracked Changes. Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
27/02/2023 - PDF - Anglais -
En savoir plus326,00 € -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
15/02/2023 - PDF - Anglais -
En savoir plus99,60 € -
ASTM F1970-23
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
15/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
UNE-EN 1852-1:2018+A1:2023
Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
15/02/2023 - PDF - Espagnol -
En savoir plus83,00 € -
ASTM F1970-23 + Redline
Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
15/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
23/30437565 DC:2023
BS ISO 13265. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
08/02/2023 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
02/02/2023 - PDF - Anglais -
En savoir plus180,00 € -
ASTM F3347-23 + Redline
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F2145-23
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
ASTM F2145-23 + Redline
Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
01/02/2023 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F3347-23
Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
01/02/2023 - PDF - Anglais -
En savoir plus54,00 € -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
25/01/2023 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
25/01/2023 - PDF - Anglais -
En savoir plus180,00 € -
23/30427627 DC:2023
BS ISO 16422-2 Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 2:
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30427632 DC:2023
BS ISO 16422-5. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 5. Fitness purpose system
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
23/30427624 DC:2023
BS ISO 16422-1. Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Part 1. General
19/01/2023 - PDF - Anglais -
En savoir plus24,00 € -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
15/01/2023 - PDF - Anglais -
En savoir plus58,00 € -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
15/01/2023 - PDF - Allemand -
En savoir plus37,00 € -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
15/01/2023 - PDF - Français -
En savoir plus37,00 € -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
15/01/2023 - PDF - Allemand -
En savoir plus58,00 € -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
15/01/2023 - PDF - Français -
En savoir plus58,00 € -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
15/01/2023 - PDF - Anglais -
En savoir plus37,00 € -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
14/01/2023 - PDF - Allemand -
En savoir plus58,00 € -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
14/01/2023 - PDF - Français -
En savoir plus58,00 € -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
14/01/2023 - PDF - Anglais -
En savoir plus58,00 € -
NF EN ISO 13266, P16-367 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation
01/01/2023 - Papier - Français -
En savoir plus48,00 € -
NF EN ISO 13267, P16-368 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage
01/01/2023 - Papier - Français -
En savoir plus60,67 € -
NF EN ISO 13268, P16-369 (01/2023)
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire
01/01/2023 - Papier - Français -
En savoir plus60,67 € -
ASTM D2992-22
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
01/12/2022 - PDF - Anglais -
En savoir plus54,00 € -
ASTM D2992-22 + Redline
Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
01/12/2022 - PDF - Anglais -
En savoir plus65,00 € -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
16/11/2022 - PDF - Anglais -
En savoir plus62,40 € -
UNE-EN 14541-1:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 1: Vocabulary
16/11/2022 - PDF - Espagnol -
En savoir plus52,00 € -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
19/10/2022 - PDF - Espagnol -
En savoir plus74,00 € -
UNE-CEN/TS 17176-3:2022 EX
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings
19/10/2022 - PDF - Anglais -
En savoir plus88,80 € -
BS EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
17/10/2022 - PDF - Anglais -
En savoir plus293,00 € -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
13/10/2022 - PDF - Anglais -
En savoir plus142,00 € -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
13/10/2022 - PDF - Français -
En savoir plus142,00 € -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
13/10/2022 - PDF - Allemand -
En savoir plus142,00 € -
UNE-CEN/TS 14541-2:2022
Plastics pipes and fittings - Utilisation of thermoplastics recyclates - Part 2: Recommendations for relevant characteristics (Endorsed by Asociación Española de Normalización in July of 2022.)
12/10/2022 - PDF - Anglais -
En savoir plus65,00 € -
NF EN 17176-2+A1, T54-968-2 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
01/10/2022 - Papier - Français -
En savoir plus86,67 € -
ASTM D3311-22
Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
01/10/2022 - PDF - Anglais -
En savoir plus78,00 € -
NF EN 17176-2/IN1, T54-968-2/IN1 (10/2022)
Systèmes de canalisations en plastique pour l'alimentation en eau, les branchements et collecteurs d'assainissement et les systèmes d'irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 2 : Tubes
01/10/2022 - Papier - Français -
En savoir plus43,50 € -
ASTM D3311-22 + Redline
Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
01/10/2022 - PDF - Anglais -
En savoir plus93,00 € -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus68,00 € -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
28/09/2022 - PDF - Anglais -
En savoir plus72,00 € -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus60,00 € -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
28/09/2022 - PDF - Anglais -
En savoir plus72,00 € -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus58,00 € -
UNE-EN ISO 15877-3:2009/A2:2022
Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 3: Fittings - Amendment 2 (ISO 15877-3:2009/Amd 2:2021)
28/09/2022 - PDF - Anglais -
En savoir plus81,60 € -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus58,00 € -
UNE-EN ISO 15875-3:2004/A2:2022
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
28/09/2022 - PDF - Anglais -
En savoir plus72,00 € -
UNE-EN ISO 22391-3:2010/A2:2022
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus60,00 € -
UNE-EN ISO 15876-3:2017/A2:2022
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
28/09/2022 - PDF - Anglais -
En savoir plus69,60 € -
UNE-EN ISO 21003-3:2009/A1:2022
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
28/09/2022 - PDF - Espagnol -
En savoir plus60,00 € -
UNE-EN ISO 15874-3:2013/A2:2022
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
28/09/2022 - PDF - Anglais -
En savoir plus69,60 € -
BS EN ISO 15877-3:2009+A2:2021
Plastics piping systems for hot and cold water installations. Chlorinated poly(vinyl chloride) (PVC-C) Fittings
21/09/2022 - PDF - Anglais -
En savoir plus348,00 € -
BS ISO 17885:2021
Plastics piping systems. Mechanical fittings for pressure piping systems. Specifications
15/08/2022 - PDF - Anglais -
En savoir plus331,00 € -
NF EN 14420-2, T47-290-2 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 2 : douilles pour flexibles
01/08/2022 - Papier - Français -
En savoir plus48,00 € -
NF EN 14420-4, T47-290-4 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 4 : raccordements à bride
01/08/2022 - Papier - Français -
En savoir plus60,67 € -
NF EN 14420-7, T47-290-7 (08/2022)
Raccords pour flexibles avec demi-coquille - Partie 7 : raccords à cames
01/08/2022 - Papier - Français -
En savoir plus86,67 € -
ASTM D2122-22 + Redline
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
01/07/2022 - PDF - Anglais -
En savoir plus61,00 € -
ASTM F409-22 + Redline
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
01/07/2022 - PDF - Anglais -
En savoir plus68,00 € -
DIN CEN/TS 17176-3:2022-07
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 3: Fittings, German version CEN/TS 17176-3:2022
01/07/2022 - PDF - Allemand -
En savoir plus68,60 € -
ASTM D2122-22
Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
01/07/2022 - PDF - Anglais -
En savoir plus51,00 € -
ASTM F409-22
Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
01/07/2022 - PDF - Anglais -
En savoir plus57,00 € -
PD CEN/TS 17176-3:2022
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Fittings
30/06/2022 - PDF - Anglais -
En savoir plus250,00 € -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
25/05/2022 - PDF - Espagnol -
En savoir plus96,00 € -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
25/05/2022 - PDF - Espagnol -
En savoir plus74,00 € -
UNE-EN ISO 11298-4:2022
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
25/05/2022 - PDF - Anglais -
En savoir plus115,20 € -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
25/05/2022 - PDF - Anglais -
En savoir plus88,80 € -
BS 8561:2021 + Redline
Tracked Changes. Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
17/05/2022 - PDF - Anglais -
En savoir plus326,00 € -
UNE-EN 1555-3:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
11/05/2022 - PDF - Espagnol -
En savoir plus77,00 € -
UNE-EN 1555-3:2022
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings
11/05/2022 - PDF - Anglais -
En savoir plus92,40 € -
DIN EN ISO 22391-3:2022-05
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings (ISO 22391-3:2009 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 22391-3:2009 + A1:2020 + A2:2021.
01/05/2022 - PDF - Anglais, Allemand -
En savoir plus104,95 € -
DIN EN ISO 15876-3:2022-05
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15876-3:2017 + A1:2020 + A2:2021.
01/05/2022 - PDF - Anglais, Allemand -
En savoir plus110,00 € -
DIN EN ISO 15874-3:2022-05
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings (ISO 15874-3:2013 + Amd 1:2018 + Amd 2:2021), German and English version EN ISO 15874-3:2013 + A1:2018 + A2:2021.
01/05/2022 - PDF - Anglais, Allemand -
En savoir plus110,00 € -
NF EN 14541-1, P16-373-1 (05/2022)
Tubes et raccords en plastique - Utilisation de recyclats thermoplastiques - Partie 1 : vocabulaire
01/05/2022 - Papier - Français -
En savoir plus48,00 € -
BS EN ISO 22391-3:2009+A2:2021
Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fittings
22/04/2022 - PDF - Anglais -
En savoir plus293,00 € -
CEN/TS 17176-3:2022
Systèmes de canalisations en plastique pour l?alimentation en eau, les branchements et collecteurs d?assainissement et les systèmes d?irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 3 : Raccords
09/04/2022 - PDF - Allemand -
En savoir plus121,00 € -
CEN/TS 17176-3:2022
Systèmes de canalisations en plastique pour l?alimentation en eau, les branchements et collecteurs d?assainissement et les systèmes d?irrigation sous pression, enterrés ou aériens - Poly(chlorure de vinyle) non plastifié orienté (PVC-O) - Partie 3 : Raccords
09/04/2022 - PDF - Anglais -
En savoir plus121,00 € -
DIN EN ISO 11298-4:2022-04
Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
01/04/2022 - PDF - Allemand -
En savoir plus126,26 € -
22/30385843 DC:2022
BS ISO 23627. Plastics piping systems for non-pressure underground drainage and sewerage. Steel-Reinforced-Polyethylene (SRPE). Corrugated Pipes and fittings
30/03/2022 - PDF - Anglais -
En savoir plus24,00 € -
BS EN ISO 15876-3:2017+A2:2021
Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings
23/03/2022 - PDF - Anglais -
En savoir plus293,00 € -
BS EN ISO 15874-3:2013+A2:2021
Plastics piping systems for hot and cold water installations. Polypropylene (PP) Fittings
21/03/2022 - PDF - Anglais -
En savoir plus293,00 € -
DIN EN ISO 15875-3:2022-03
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2003 + Amd 1:2020 + Amd 2:2021), German and English version EN ISO 15875-3:2003 + A1:2020 + A2:2021.
01/03/2022 - PDF - Anglais, Allemand -
En savoir plus99,35 € -
BS EN ISO 21003-3:2008+A1:2021
Multilayer piping systems for hot and cold water installations inside buildings Fittings
16/02/2022 - PDF - Anglais -
En savoir plus180,00 € -
BS EN ISO 15875-3:2003+A2:2021
Plastics piping systems for hot and cold water installations. Crosslinked polyethylene (PE-X) Fittings
03/02/2022 - PDF - Anglais -
En savoir plus250,00 € -
ASTM F3536-22 + Redline
Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
01/02/2022 - PDF - Anglais -
En savoir plus65,00 € -
ASTM F3536-22
Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
01/02/2022 - PDF - Anglais -
En savoir plus54,00 € -
BS EN 1555-3:2021 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
17/01/2022 - PDF - Anglais -
En savoir plus382,00 € -
DIN EN 1555-3:2021-12
Plastics piping systems for the supply of gaseous fuels - Polyethylene (PE) - Part 3: Fittings, German version EN 1555-3:2021.
01/12/2021 - PDF - Allemand -
En savoir plus104,95 € -
BS 8561:2021
Specification for mechanical fittings for use in the repair, connection and renovation of pressurized water supply pipelines. Requirements and test methods
25/11/2021 - PDF - Anglais -
En savoir plus250,00 € -
BS ISO 10952:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Determination of the resistance to chemical attack for the inside of a section in a deflected condition
09/11/2021 - PDF - Anglais -
En savoir plus235,00 € -
21/30441043 DC:2021
BS EN 16904. Plastics piping systems. Environmental product declarations. Product Category rules complementary to EN 15804, for plastic piping systems inside buildings
04/11/2021 - PDF - Anglais -
En savoir plus24,00 € -
21/30441046 DC:2021
BS EN 16903. Plastics piping systems. Environmental product declarations. Product Category Rules complementary to EN 15804, for buried plastics piping systems
04/11/2021 - PDF - Anglais -
En savoir plus24,00 € -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
03/11/2021 - PDF - Espagnol -
En savoir plus52,00 € -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
03/11/2021 - PDF - Anglais -
En savoir plus62,40 € -
ASTM D2729-21
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
01/11/2021 - PDF - Anglais -
En savoir plus51,00 € -
ASTM F2880-21 + Redline
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes in. to 65 in.3 4
01/11/2021 - PDF - Anglais -
En savoir plus61,00 € -
DIN EN ISO 11296-4:2021-11
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
01/11/2021 - PDF - Allemand -
En savoir plus131,96 € -
ASTM D2729-21 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
01/11/2021 - PDF - Anglais -
En savoir plus61,00 € -
ASTM F2880-21
Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes in. to 65 in.3 4
01/11/2021 - PDF - Anglais -
En savoir plus51,00 € -
NBN EN ISO 15875-3:2003/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 3: Raccords - Amendement 2 (ISO 15875-3:2003/Amd 2:2021)
29/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 21003-3:2008/A1:2021
Multilayer piping systems for hot and cold water installations inside buildings - Part 3: Fittings - Amendment 1 (ISO 21003-3:2008/Amd 1:2021)
29/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 15876-3:2017/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 3: Raccords - Amendement 2 (ISO 15876-3:2017/Amd 2:2021)
29/10/2021 - PDF - Français -
En savoir plus20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3: Raccords - Amendement 2 (ISO 22391-3:2009/Amd 2:2021)
29/10/2021 - PDF - Français -
En savoir plus20,00 € -
NBN EN ISO 15875-3:2003/A2:2021
Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings - Amendment 2 (ISO 15875-3:2003/Amd 2:2021)
29/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
29/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 21003-3:2008/A1:2021
Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments - Partie 3: Raccords - Amendement 1 (ISO 21003-3:2008/Amd 1:2021)
29/10/2021 - PDF - Français -
En savoir plus20,00 € -
NBN EN ISO 15874-3:2013/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3: Raccords - Amendement 2 (ISO 15874-3:2013/Amd 2:2021)
29/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 15876-3:2017/A2:2021
Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings - Amendment 2 (ISO 15876-3:2017/Amd 2:2021)
29/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 15876-3:2017/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polybutène (PB) - Partie 3: Raccords - Amendement 2 (ISO 15876-3:2017/Amd 2:2021)
29/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 15875-3:2003/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 3: Raccords - Amendement 2 (ISO 15875-3:2003/Amd 2:2021)
29/10/2021 - PDF - Français -
En savoir plus20,00 € -
NBN EN ISO 22391-3:2009/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3: Raccords - Amendement 2 (ISO 22391-3:2009/Amd 2:2021)
29/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 21003-3:2008/A1:2021
Systèmes de canalisations multicouches pour installations d'eau chaude et froide à l'intérieur des bâtiments - Partie 3: Raccords - Amendement 1 (ISO 21003-3:2008/Amd 1:2021)
29/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 15874-3:2013/A2:2021
Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 3: Fittings - Amendment 2 (ISO 15874-3:2013/Amd 2:2021)
29/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 15874-3:2013/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polypropylène (PP) - Partie 3: Raccords - Amendement 2 (ISO 15874-3:2013/Amd 2:2021)
29/10/2021 - PDF - Français -
En savoir plus20,00 € -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
27/10/2021 - PDF - Espagnol -
En savoir plus68,00 € -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
27/10/2021 - PDF - Anglais -
En savoir plus85,20 € -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
27/10/2021 - PDF - Anglais -
En savoir plus84,00 € -
UNE-EN ISO 11299-2:2021
Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018)
27/10/2021 - PDF - Anglais -
En savoir plus81,60 € -
UNE-EN ISO 11299-3:2021
Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018)
27/10/2021 - PDF - Espagnol -
En savoir plus71,00 € -
UNE-EN ISO 11299-1:2021
Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018)
27/10/2021 - PDF - Espagnol -
En savoir plus70,00 € -
NBN EN ISO 15877-3:2009/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 2 (ISO 15877-3:2009/Amd 2:2021)
16/10/2021 - PDF - Allemand -
En savoir plus20,00 € -
NBN EN ISO 15877-3:2009/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 2 (ISO 15877-3:2009/Amd 2:2021)
16/10/2021 - PDF - Anglais -
En savoir plus20,00 € -
NBN EN ISO 15877-3:2009/A2:2021
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 3: Raccords - Amendement 2 (ISO 15877-3:2009/Amd 2:2021)
16/10/2021 - PDF - Français -
En savoir plus20,00 € -
BS ISO 7432:2021 + Redline
Tracked Changes. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Test methods to prove the design of locked socket-and-spigot joints, including double-socket joints, with elastomeric seals
04/10/2021 - PDF - Anglais -
En savoir plus326,00 € -
NF EN ISO 15875-3/A2, T54-943-3/A2 (10/2021)
Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 3 : raccords - Amendement 2
01/10/2021 - Papier - Français -
En savoir plus48,00 €