23 : Fluidique et composants à usage général
-
BS EN ISO 10297:2024
Gas cylinders. Cylinder valves. Specification and type testing
12/04/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
PAS 4443:2024
Assessment criteria: Ancillary valves, devices and components used in hydrogen gas installations. Specification
11/04/2024 - PDF - Anglais - BSI
En savoir plus168,00 € -
24,00 €
-
24/30488707 DC:2024
BS EN 13079 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
11/04/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10/04/2024 - PDF - Espagnol - AENOR
En savoir plus34,00 € -
UNE-EN ISO 11363-1:2018/A1:2024
Gas cylinders - 17E and 25E taper threads for connection of valves to gas cylinders - Part 1: Specifications - Amendment 1 (ISO 11363-1:2018/Amd 1:2023)
10/04/2024 - PDF - Anglais - AENOR
En savoir plus40,80 € -
BS EN ISO 4126-10:2024 + Redline
Tracked Changes. Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
10/04/2024 - PDF - Anglais - BSI
En savoir plus492,00 € -
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
10/04/2024 - PDF - Espagnol - AENOR
En savoir plus63,00 € -
UNE-EN ISO 10468:2024
Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023)
10/04/2024 - PDF - Anglais - AENOR
En savoir plus75,60 € -
BS EN 12201-3:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
10/04/2024 - PDF - Anglais - BSI
En savoir plus432,00 € -
BS EN ISO 4126-10:2024
Safety devices for protection against excessive pressure Sizing of safety valves and bursting discs gas/liquid two-phase flow
04/04/2024 - PDF - Anglais - BSI
En savoir plus377,00 € -
BS EN ISO 22435:2024
Gas cylinders. Cylinder valves with integrated pressure regulators. Specification and type testing
04/04/2024 - PDF - Anglais - BSI
En savoir plus293,00 € -
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
03/04/2024 - PDF - Espagnol - AENOR
En savoir plus85,00 € -
UNE-EN ISO 5117:2024
Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023)
03/04/2024 - PDF - Anglais - AENOR
En savoir plus102,00 € -
BS EN ISO 8233:2024 + Redline
Tracked Changes. Thermoplastics valves. Torque. Test method
03/04/2024 - PDF - Anglais - BSI
En savoir plus197,00 € -
UNE-EN ISO 11623:2024
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
03/04/2024 - PDF - Espagnol - AENOR
En savoir plus93,00 € -
UNE-EN ISO 11623:2024
Gas cylinders - Composite cylinders and tubes - Periodic inspection and testing (ISO 11623:2023)
03/04/2024 - PDF - Anglais - AENOR
En savoir plus111,60 € -
UNE-EN 12449:2024
Copper and copper alloys - Seamless, round tubes for general purposes
03/04/2024 - PDF - Espagnol - AENOR
En savoir plus95,00 € -
UNE-EN 12449:2024
Copper and copper alloys - Seamless, round tubes for general purposes
03/04/2024 - PDF - Anglais - AENOR
En savoir plus114,00 € -
BS ISO 10928:2024 + Redline
Tracked Changes. Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
03/04/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
DIN EN ISO 10497:2024-04
Testing of valves - Fire type-testing requirements (ISO 10497:2022), German version EN ISO 10497:2022
01/04/2024 - PDF - Allemand - DIN
En savoir plus92,62 € -
DIN 21057-10:2024-04
Pipe classes for process plants - Part 10: Technical delivery conditions for pipe components of non-alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.1
01/04/2024 - PDF - Allemand - DIN
En savoir plus163,74 € -
DIN 21057-11:2024-04
Pipe classes for process plants - Part 11: Technical delivery conditions for pipe components of austenitic stainless steels of material group 8.1
01/04/2024 - PDF - Allemand - DIN
En savoir plus158,04 € -
DIN 21057-12:2024-04
Pipe classes for process plants - Part 12: Technical delivery conditions for pipe components of non alloyed and alloyed steel with specified properties at elevated temperatures of material group 1.2 and 5.1
01/04/2024 - PDF - Allemand - DIN
En savoir plus158,04 € -
DIN CEN/TS 14632:2024-04
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
01/04/2024 - PDF - Allemand - DIN
En savoir plus92,43 € -
DIN 16262:2024-04
PN 6 and PN 16 cocks with adjusting nut and male connection for pressure gauges
01/04/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN 35913:2024-04
Valves for drinking water installations in buildings - Level-controlled shut-off valves in drinking water installations - Requirements and tests
01/04/2024 - PDF - Allemand - DIN
En savoir plus52,90 € -
PR NF EN ISO 18984, T54-958PR (04/2024)
Robinets à tournant sphérique pour systèmes de canalisations en matières thermoplastiques pour installations d'eau chaude et froide sous pression - Types, dimensions et exigences
01/04/2024 - Papier - Anglais, Français - AFNOR
En savoir plus88,50 € -
DIN EN 17038-4:2024-04
Pumps - Methods of qualification of the Energy Efficiency Index for rotodynamic pump units - Part 4: Testing and calculation of energy efficiency index (EEI) of submersible multistage pump units, German version EN 17038-4:2023
01/04/2024 - PDF - Allemand - DIN
En savoir plus104,95 € -
DIN EN ISO 11117:2024-04
Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019), German version EN ISO 11117:2019
01/04/2024 - PDF - Allemand - DIN
En savoir plus85,79 € -
DIN 16270:2024-04
PN 250 and PN 400 valves without test connection for pressure gauges
01/04/2024 - PDF - Allemand - DIN
En savoir plus45,98 € -
DIN 16271:2024-04
PN 250 and PN 400 valves with test connection for pressure gauges
01/04/2024 - PDF - Allemand - DIN
En savoir plus45,98 € -
DIN 4811-2:2024-04
Pressure regulators for LPG and safety devices - Part 2: Conformity assessement.
01/04/2024 - PDF - Allemand - DIN
En savoir plus59,63 € -
DIN EN 10378:2024-04
Welded stainless steel square and rectangular tubes for mechanical, engineering and decorative use - Technical delivery conditions, German and English version prEN 10378:2024
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus99,35 € -
DIN 4811-1:2024-04
Pressure regulators for LPG and safety devices - Part 1: Requirements.
01/04/2024 - PDF - Allemand - DIN
En savoir plus120,84 € -
PR NF EN ISO 7866/A2, E29-743/A2PR (04/2024)
Bouteilles à gaz - Bouteilles à gaz sans soudure en alliage d'aluminium destinées à être rechargées - Conception, construction et essais - Amendement 2
01/04/2024 - Papier - Anglais, Français - AFNOR
En savoir plus45,00 € -
ASTM A333/A333M-24
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A333/A333M-24 + Redline
Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A335/A335M-24
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
01/04/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM A335/A335M-24 + Redline
Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service
01/04/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
24/30483302 DC:2024
BS EN ISO 5801:2017/Amd 1 Fans - Performance testing using standardized airways. Amendment 1
01/04/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
PR NF EN 14511-2/A1, E38-116-2/A1PR (04/2024)
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 2 : Conditions d'essai
01/04/2024 - Papier - Anglais, Français - AFNOR
En savoir plus45,00 € -
PR NF EN 14511-3/A1, E38-116-3/A1PR (04/2024)
Climatiseurs, groupes refroidisseurs de liquide et pompes à chaleur pour le chauffage et le refroidissement des locaux et refroidisseurs industriels avec compresseur entraîné par moteur électrique - Partie 3 : Méthodes d'essai
01/04/2024 - Papier - Anglais, Français - AFNOR
En savoir plus35,50 € -
DIN EN ISO 7510:2024-04
Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017), German version EN ISO 7510:2024
01/04/2024 - PDF - Allemand - DIN
En savoir plus59,63 € -
DIN EN 16903:2024-04
Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16903:2024
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus104,95 € -
DIN EN 13079:2024-04
Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D, German and English version prEN 13079:2024
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus65,89 € -
DIN EN 16904:2024-04
Plastics piping systems - Environmental product declarations - Product Category rules complementary to EN 15804, German and English version prEN 16904:2024
01/04/2024 - PDF - Anglais, Allemand - DIN
En savoir plus99,35 € -
ASTM D2241-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM D2241-24 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM D2665-24
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM D2665-24 + Redline
Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM D2846/D2846M-24
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
01/04/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM D2846/D2846M-24 + Redline
Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
01/04/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM F2618-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F2618-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM F437-24
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F437-24 + Redline
Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM F439-24
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM F439-24 + Redline
Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
01/04/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
DIN 11864-2:2024-04
Stainless steel components for aseptic applications in the chemical and the pharmaceutical industries - Part 2: Flange connections
01/04/2024 - PDF - Allemand - DIN
En savoir plus110,00 € -
DIN 3384-1:2024-04
Pipework - Part 1: Types of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
01/04/2024 - PDF - Allemand - DIN
En savoir plus79,72 € -
DIN 3384-2:2024-04
Pipework - Part 2: Conformity assessment of connection for corrugated stainless steel metal hose assemblies according to DIN EN 16617 for combustible gases.
01/04/2024 - PDF - Allemand - DIN
En savoir plus59,63 € -
24/30490581 DC:2024
BS EN IEC 60879 AMD 1 Comfort fans and regulators for household and similar purposes - Methods for measuring performance
29/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30484766 DC:2024
BS EN 16903 Plastic piping systems buried outside the building structure - Environmental product declarations - Product Category rules complementary to EN 15804
28/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30488704 DC:2024
BS EN 16904 Plastics piping systems inside the building structure - Environmental product declarations. Product category rules complementary to EN 15804
28/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
UNE-EN 15001-2:2024
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
27/03/2024 - PDF - Espagnol - AENOR
En savoir plus74,00 € -
UNE-EN 15001-2:2024
Gas supply systems - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 2: Detailed functional requirements for commissioning, operation and maintenance
27/03/2024 - PDF - Anglais - AENOR
En savoir plus88,80 € -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
27/03/2024 - PDF - Espagnol - AENOR
En savoir plus70,00 € -
UNE-EN 17821:2024
Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
27/03/2024 - PDF - Anglais - AENOR
En savoir plus84,00 € -
24/30457738 DC:2024
BS EN ISO 21028-1 Cryogenic vessels - Toughness requirements for materials at cryogenic temperature Part 1: Temperatures below -80 degrees C
25/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
PAS 8855:2024
Vaping products and vaping devices. Quality, safety and performance. Specification
25/03/2024 - PDF - Anglais - BSI
En savoir plus119,00 € -
BS EN 12201-1:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
22/03/2024 - PDF - Anglais - BSI
En savoir plus382,00 € -
BS ISO 16132:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings. Seal coats for cement mortar linings
22/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS ISO 10928:2024
Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes and fittings. Methods for regression analysis and their use
22/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS EN 12201-2:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
22/03/2024 - PDF - Anglais - BSI
En savoir plus382,00 € -
BS EN 12201-4:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
21/03/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20/03/2024 - PDF - Espagnol - AENOR
En savoir plus88,00 € -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
20/03/2024 - PDF - Anglais - AENOR
En savoir plus105,60 € -
24/30479027 DC:2024
BS ISO 13348 Fans - Tolerances, methods of conversion and technical data presentation
18/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
151,00 €
-
BS EN 1594:2024 + Redline
Tracked Changes. Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
15/03/2024 - PDF - Anglais - BSI
En savoir plus492,00 € -
BS EN 12201-4:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Valves supply
14/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
24/30443602 DC:2024
EN 1993-4-2 Eurocode 3. Design of steel structures. Part 4-2: Tanks
14/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
BS EN 12201-2:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Pipes
14/03/2024 - PDF - Anglais - BSI
En savoir plus293,00 € -
BS EN 12201-3:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fittings
14/03/2024 - PDF - Anglais - BSI
En savoir plus331,00 € -
NBN EN ISO 8233:2024
Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai (ISO 8233:2024)
13/03/2024 - PDF - Français - NBN
En savoir plus58,00 € -
NBN EN ISO 8233:2024
Thermoplastics valves - Torque - Test method (ISO 8233:2024)
13/03/2024 - PDF - Anglais - NBN
En savoir plus58,00 € -
UNE 62425:2024
Construction of double-walled bottoms (non-inspectable base). in vertical axle air tanks manufactured in situ of single-walled steel
13/03/2024 - PDF - Espagnol - AENOR
En savoir plus60,00 € -
BS EN 12201-1:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) General
13/03/2024 - PDF - Anglais - BSI
En savoir plus293,00 € -
BS EN 17878-3:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for non bonded plastic service pipes
13/03/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS EN 17878-2:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Requirements and test methods for bonded plastic service pipes
13/03/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
UNE-EN 12309-1:2024
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
13/03/2024 - PDF - Espagnol - AENOR
En savoir plus76,00 € -
UNE-EN 12309-1:2024
Gas-fired sorption appliances for heating and/or cooling with a net heat input not exceeding 70 kW - Part 1: Terms and definitions
13/03/2024 - PDF - Anglais - AENOR
En savoir plus91,20 € -
BS ISO 16132:2024
Ductile iron pipes and fittings. Seal coats for cement mortar linings
12/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
NBN ISO 3601-2:2024
Transmissions hydrauliques et pneumatiques — Joints toriques — Partie 2: Dimensions des logements pour applications générales ISO 3601-2:2016
12/03/2024 - PDF - Français - NBN
En savoir plus184,00 € -
NBN ISO 3601-4:2024
Fluid power systems — O-rings — Part 4: Anti-extrusion rings (back-up rings) ISO 3601-4:2008
12/03/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
NBN ISO 3601-2:2024
Fluid power systems — O-rings — Part 2: Housing dimensions for general applications ISO 3601-2:2016
12/03/2024 - PDF - Anglais - NBN
En savoir plus184,00 € -
BS EN 1594:2024
Gas infrastructure. Pipelines for maximum operating pressure over 16 bar. Functional requirements
11/03/2024 - PDF - Anglais - BSI
En savoir plus377,00 € -
BS EN 17878-1:2024
District heating pipes. Factory made flexible pipe systems with a lower temperature profile Classification, general requirements and test methods
08/03/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
24/30476059 DC:2024
BS EN ISO 21036 Plastics piping systems for industrial applications -Unplasticized Polyamide (PA-U) - Metric series for specifications for components and system
07/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30484769 DC:2024
BS EN 1705 Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow
07/03/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
NBN EN 1594:2024
Gasinfrastruktur - Rohrleitungen für einen maximal zulässigen Betriebsdruck über 16 bar - Funktionale Anforderungen
06/03/2024 - PDF - Allemand - NBN
En savoir plus184,00 € -
NBN EN 1594:2024
Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements
06/03/2024 - PDF - Anglais - NBN
En savoir plus184,00 € -
NBN EN 17878-3:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : Exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
06/03/2024 - PDF - Français - NBN
En savoir plus89,00 € -
NBN EN 17878-2:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : Exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
06/03/2024 - PDF - Français - NBN
En savoir plus89,00 € -
NBN EN 17878-1:2024
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : Classification, exigences générales et méthodes d'essai
06/03/2024 - PDF - Français - NBN
En savoir plus142,00 € -
NBN EN 17878-3:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 3: Requirements and test methods for non bonded systems with plastic service pipes
06/03/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
NBN EN 17878-2:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 2: Requirements and test methods for bonded systems with plastic service pipes
06/03/2024 - PDF - Anglais - NBN
En savoir plus89,00 € -
NBN EN 17878-1:2024
District heating pipes - Factory made flexible pipe systems with a lower temperature profile - Part 1: Classification, general requirements and test methods
06/03/2024 - PDF - Anglais - NBN
En savoir plus142,00 € -
UNE-EN ISO 5774:2024
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
06/03/2024 - PDF - Espagnol - AENOR
En savoir plus68,00 € -
UNE-EN ISO 5774:2024
Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023)
06/03/2024 - PDF - Anglais - AENOR
En savoir plus81,60 € -
BS EN IEC 63086-2-1:2024
Household and similar electrical air cleaning appliances. Methods for measuring the performance Particular requirements determination of particle reduction
05/03/2024 - PDF - Anglais - BSI
En savoir plus293,00 € -
NF EN ISO 8233, T54-083 (03/2024)
Robinets en matériaux thermoplastiques - Couple de manoeuvre - Méthode d'essai
01/03/2024 - Papier - Français - AFNOR
En savoir plus43,50 € -
DIN CEN/TS 1455-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
01/03/2024 - PDF - Allemand - DIN
En savoir plus68,60 € -
DIN EN 19:2024-03
Industrial valves - Marking of metallic valves, German version EN 19:2023
01/03/2024 - PDF - Allemand - DIN
En savoir plus72,80 € -
DIN 3630:2024-03
Shut-off valves, check valves, air supply/exhaust valves and control valves made of metallic materials for potable water supply systems - Requirements and test methods
01/03/2024 - PDF - Allemand - DIN
En savoir plus52,90 € -
DIN EN 13476-1:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics, German and English version prEN 13476-1:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
DIN EN 13476-2:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specifications for pipes and fittings with smooth internal and external surface and the system, Type A, German and English version prEN 13476-2:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus131,96 € -
DIN EN 13476-3:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Specifications for pipes and fittings with smooth internal and profiled external surface and the system, Type B, German and English version prEN 13476-3:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus131,96 € -
DIN EN 1705:2024-03
Plastics piping systems - Thermoplastics valves - Test method for the integrity of a valve after an external blow, German and English version prEN 1705:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus59,63 € -
DIN CEN/TS 13598-3:2024-03
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 3: Assessment of conformity, German version CEN/TS 13598-3:2021.
01/03/2024 - PDF - Allemand - DIN
En savoir plus88,04 € -
DIN 16261:2024-03
PN 16 cocks with female/female and female/male connection for pressure gauges
01/03/2024 - PDF - Allemand - DIN
En savoir plus39,35 € -
DIN EN ISO 18984:2024-03
Ball valves for thermoplastics piping systems for hot and cold water installations under pressure - Types, dimensions and requirements (ISO/DIS 18984:2024), German and English version prEN ISO 18984:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus92,62 € -
NF EN 17878-1, E39-021-1 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 1 : classification, exigences générales et méthodes d'essai
01/03/2024 - Papier - Français - AFNOR
En savoir plus93,50 € -
NF EN 17878-3, E39-021-3 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 3 : exigences et méthodes d'essai pour les systèmes non bloqués avec tubes de service en plastique
01/03/2024 - Papier - Français - AFNOR
En savoir plus68,50 € -
NF EN 17878-2, E39-021-2 (03/2024)
Tuyaux de chauffage urbain - Système de tuyaux flexibles préisolés - Partie 2 : exigences et méthodes d'essai pour les systèmes bloqués avec tubes de service en plastique
01/03/2024 - Papier - Français - AFNOR
En savoir plus68,50 € -
DIN EN 13445-4:2024-03
Unfired pressure vessels - Part 4: Fabrication, German version EN 13445-4:2021+A1:2023
01/03/2024 - PDF - Allemand - DIN
En savoir plus152,71 € -
ASTM A179/A179M-24
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus52,00 € -
ASTM A179/A179M-24 + Redline
Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus63,00 € -
ASTM A270/A270M-24
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A270/A270M-24 + Redline
Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A312/A312M-24
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM A312/A312M-24 + Redline
Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM A369/A369M-24
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A369/A369M-24 + Redline
Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A53/A53M-24
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
01/03/2024 - PDF - Anglais - ASTM
En savoir plus86,00 € -
ASTM A53/A53M-24 + Redline
Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
01/03/2024 - PDF - Anglais - ASTM
En savoir plus103,00 € -
ASTM A790/A790M-24
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A790/A790M-24 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
PR NF ISO 7368, E48-430PR (03/2024)
Transmissions hydrauliques - Distributeurs à cartouche, à bride, à deux orifices - Logements
01/03/2024 - Papier - Anglais, Français - AFNOR
En savoir plus115,50 € -
ASTM A249/A249M-24
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A249/A249M-24 + Redline
Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A358/A358M-24
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A358/A358M-24 + Redline
Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A409/A409M-24
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A409/A409M-24 + Redline
Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A688/A688M-24
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A688/A688M-24 + Redline
Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A813/A813M-24
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A813/A813M-24 + Redline
Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
DIN EN 12583/A1:2024-03
Gas Infrastructure - Compressor stations - Functional requirements, German and English version EN 12583:2022/prA1:2024
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus39,35 € -
DIN CEN/TS 1566-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023.
01/03/2024 - PDF - Allemand - DIN
En savoir plus68,60 € -
DIN EN 17670-2:2024-03
Plastics piping systems for non-pressure underground conveyance of surface water - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 2: Specification for road gullies, German version EN 17670-2:2023
01/03/2024 - PDF - Allemand - DIN
En savoir plus126,26 € -
DIN CEN/TS 1329-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1329-2:2021
01/03/2024 - PDF - Allemand - DIN
En savoir plus92,62 € -
DIN 4726:2024-03
Warm water surface heating systems and radiator connections - Plastics and multilayer piping systems, Text in German and English
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus79,72 € -
ASTM A350/A350M-24
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A350/A350M-24 + Redline
Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A182/A182M-24
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM A182/A182M-24 + Redline
Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
ASTM A789/A789M-24
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A789/A789M-24 + Redline
Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A815/A815M-24
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A815/A815M-24 + Redline
Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
ASTM A778/A778M-24
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
01/03/2024 - PDF - Anglais - ASTM
En savoir plus60,00 € -
ASTM A778/A778M-24 + Redline
Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
01/03/2024 - PDF - Anglais - ASTM
En savoir plus71,00 € -
54,00 €
-
VG 95922-7:2024-03
Hose assemblies - Part 7: Hose assemblies for fluid power service, air conditioning section, detail standard, Text in German and English
01/03/2024 - PDF - Anglais, Allemand - DIN
En savoir plus110,00 € -
DIN EN 751-3:2024-03
Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases and hot water - Part 3: Unsintered PTFE tapes and PTFE strings, German version EN 751-3:2022+A1:2023.
01/03/2024 - PDF - Allemand - DIN
En savoir plus85,79 € -
NBN ISO 16494-1:2022/Amd 1:2024
Heat recovery ventilators and energy recovery ventilators — Method of test for performance — Part 1: Development of metrics for evaluation of energy related performance — Amendment 1 ISO 16494-1:2022/Amd 1:2023
29/02/2024 - PDF - Anglais - NBN
En savoir plus20,00 € -
ASTM C1924-24
Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
29/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM C1924-24 + Redline
Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
29/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
UNE-EN IEC 60335-2-40:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28/02/2024 - PDF - Espagnol - AENOR
En savoir plus155,00 € -
UNE-EN IEC 60335-2-40:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28/02/2024 - PDF - Anglais - AENOR
En savoir plus186,00 € -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28/02/2024 - PDF - Espagnol - AENOR
En savoir plus68,00 € -
UNE-EN IEC 60335-2-40:2024/A11:2024
Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
28/02/2024 - PDF - Anglais - AENOR
En savoir plus81,60 € -
24/30457735 DC:2024
BS ISO 21013-2 Cryogenic vessels - Pressure-relief accessories for cryogenic service Part 2: Non-reclosable pressure-relief devices
27/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
PD CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications. Guidelines for Pipelines Installation
26/02/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
BS ISO 4437-2:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
26/02/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS ISO 4437-5:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
26/02/2024 - PDF - Anglais - BSI
En savoir plus326,00 € -
BS ISO 4437-3:2024 + Redline
Tracked Changes. Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
26/02/2024 - PDF - Anglais - BSI
En savoir plus382,00 € -
BS EN ISO 7510:2024
Plastics piping systems. Glass-reinforced plastics (GRP) components. Determination of the amounts of constituents
22/02/2024 - PDF - Anglais - BSI
En savoir plus151,00 € -
CEN/TR 17996:2024
Ductile iron pipes, fittings, accessories and their joints for sewerage applications - Guidelines for Pipelines Installation
21/02/2024 - PDF - Anglais - NBN
En savoir plus184,00 € -
BS ISO 4437-2:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Pipes
21/02/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
BS ISO 4437-3:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fittings
21/02/2024 - PDF - Anglais - BSI
En savoir plus293,00 € -
BS ISO 4437-5:2024
Plastics piping systems for the supply of gaseous fuels. Polyethylene (PE) Fitness purpose system
21/02/2024 - PDF - Anglais - BSI
En savoir plus250,00 € -
UNE-EN 549:2020+A1:2024
Rubber materials for seals and diaphragms for gas appliances and gas equipment
21/02/2024 - PDF - Espagnol - AENOR
En savoir plus74,00 € -
UNE-EN 549:2020+A1:2024
Rubber materials for seals and diaphragms for gas appliances and gas equipment
21/02/2024 - PDF - Anglais - AENOR
En savoir plus88,80 € -
105,00 €
-
24/30481210 DC:2024
BS EN 13476-1 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 1: General requirements performance characteristics
15/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30481213 DC:2024
BS EN 13476-2 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 2: Specifications pipes fittings with smooth internal external surface the system, Type A
15/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
24/30481216 DC:2024
BS EN 13476-3 Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) polyethylene (PE) Part 3: Specifications pipes fittings with smooth internal profiled external surface the system, Type B
15/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
ASTM F894-24
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
15/02/2024 - PDF - Anglais - ASTM
En savoir plus66,00 € -
ASTM F894-24 + Redline
Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
15/02/2024 - PDF - Anglais - ASTM
En savoir plus79,00 € -
BS EN 12201-5:2024 + Redline
Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
14/02/2024 - PDF - Anglais - BSI
En savoir plus235,00 € -
BS ISO 4179:2024 + Redline
Tracked Changes. Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
13/02/2024 - PDF - Anglais - BSI
En savoir plus382,00 € -
BS EN 13480-4:2017+A2:2023
Metallic industrial piping Fabrication and installation
12/02/2024 - PDF - Anglais - BSI
En savoir plus348,00 € -
24/30434673 DC:2024
BS ISO 18553 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
12/02/2024 - PDF - Anglais - BSI
En savoir plus24,00 € -
BS ISO 10302-1:2024 + Redline
Tracked Changes. Acoustics. Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices Airborne measurement
09/02/2024 - PDF - Anglais - BSI
En savoir plus432,00 € -
BS EN 12201-5:2024
Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
07/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 € -
BS ISO 4179:2024
Ductile iron pipes and fittings for pressure and non-pressure pipelines. Cement mortar lining
07/02/2024 - PDF - Anglais - BSI
En savoir plus180,00 €