93.025 : Systèmes externes d'adduction d'eau

Total des articles 1 à 200 de 304

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2
  • BS EN 16941-1:2024

    On-site non-potable water systems Systems for the use of rainwater
    22/03/2024 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • NBN EN 16941-1:2024

    Réseaux d’eau non potable sur site - Partie 1 : Systèmes pour l’utilisation de l’eau de pluie
    20/03/2024 - PDF - Français - NBN
    En savoir plus
    163,00 €

  • NBN EN 16941-1:2024

    Vor-Ort-Anlagen für Nicht-Trinkwasser - Teil 1: Anlagen für die Verwendung von Regenwasser
    20/03/2024 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • NBN EN 16941-1:2024

    On-site non-potable water systems - Part 1: Systems for the use of rainwater
    20/03/2024 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • BS ISO 24512:2024 + Redline

    Tracked Changes. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
    13/03/2024 - PDF - Anglais - BSI
    En savoir plus
    454,00 €

  • BS ISO 24512:2024

    Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
    08/03/2024 - PDF - Anglais - BSI
    En savoir plus
    348,00 €

  • DIN 3630:2024-03

    Shut-off valves, check valves, air supply/exhaust valves and control valves made of metallic materials for potable water supply systems - Requirements and test methods
    01/03/2024 - PDF - Allemand - DIN
    En savoir plus
    52,90 €

  • DIN EN 18049-1:2024-03

    Wells for water extraction - Part 1: Design, German and English version prEN 18049-1:2024
    01/03/2024 - PDF - Anglais, Allemand - DIN
    En savoir plus
    184,58 €

  • 24/30481228 DC:2024

    BS EN 18049-1 Wells for water extraction Part 1: Design
    25/01/2024 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • PR NF EN 805, P41-010PR (01/2024)

    Alimentation en eau - Exigences pour les réseaux extérieurs aux bâtiments et leurs composants
    01/01/2024 - Papier - Anglais, Français - AFNOR
    En savoir plus
    148,00 €

  • NF EN 12201-2, T54-063-2 (01/2024)

    Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : tubes
    01/01/2024 - Papier - Français - AFNOR
    En savoir plus
    86,67 €

  • NF EN 12201-3, T54-063-3 (01/2024)

    Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 3 : raccords
    01/01/2024 - Papier - Français - AFNOR
    En savoir plus
    108,33 €

  • DVGW W 575:2023-12

    Ermittlung von Widerstandsbeiwerten für Form- und Verbindungsstücke in der Trinkwasser-Installation
    01/12/2023 - PDF - Allemand - DVGW
    En savoir plus
    46,64 €

  • DIN EN 805:2023-12

    Water supply - Requirements for systems and components outside buildings, German and English version prEN 805:2023
    01/12/2023 - PDF - Anglais, Allemand - DIN
    En savoir plus
    179,72 €

  • 22/30433302 DC:2023

    BS EN 805. Water supply. Requirements for systems and components outside buildings
    16/11/2023 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • 23/30483756 DC:2023

    BS EN 805 Water supply. Requirements for systems and components outside buildings
    14/11/2023 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • DIN 18302:2023-09

    German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Special civil engineering works for the development of boreholes
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    39,35 €

  • DIN 18327:2023-09

    German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Well construction and geothermal probes
    01/09/2023 - PDF - Allemand - DIN
    En savoir plus
    45,98 €

  • PR NF ISO 24512, P15-922PR (06/2023)

    Activités relatives aux services de l'eau potable et de l'assainissement - Lignes directrices pour le management des services publics de l'eau potable et pour l'évaluation des services fournis
    01/06/2023 - Papier - Anglais, Français - AFNOR
    En savoir plus
    148,00 €

  • ASTM C1802-23

    Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
    01/05/2023 - PDF - Anglais - ASTM
    En savoir plus
    78,00 €

  • ASTM C1802-23 + Redline

    Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
    01/05/2023 - PDF - Anglais - ASTM
    En savoir plus
    93,00 €

  • 23/30461093 DC:2023

    BS ISO 24512. Activities relating to drinking water and wastewater services. Guidelines for the management of drinking water utilities and for the assessment of drinking water services
    28/03/2023 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS ISO 4427-2:2019+A1:2023

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Pipes
    28/02/2023 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • DIN 4943:2023-02

    Graphical layout and documentation of wells and ground water measuring points.
    01/02/2023 - PDF - Allemand - DIN
    En savoir plus
    104,95 €

  • DIN 4067:2022-10

    Water - Indicating labels - Distribution pipes and pipelines.
    01/10/2022 - PDF - Allemand - DIN
    En savoir plus
    45,98 €

  • DIN 2460:2022-10

    Steel water pipes and fittings.
    01/10/2022 - PDF - Allemand - DIN
    En savoir plus
    126,26 €

  • UNE-EN ISO 22391-3:2010/A2:2022

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    28/09/2022 - PDF - Espagnol - AENOR
    En savoir plus
    60,00 €

  • UNE-EN ISO 22391-3:2010/A2:2022

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    28/09/2022 - PDF - Anglais - AENOR
    En savoir plus
    72,00 €

  • PR NF EN 16941-1, P16-941-1PR (09/2022)

    Réseaux d'eau non potable sur site - Partie 1 : Systèmes pour l'utilisation de l'eau de pluie
    01/09/2022 - Papier - Anglais, Français - AFNOR
    En savoir plus
    115,50 €

  • DIN EN 16941-1:2022-09

    On-site non-potable water systems - Part 1: Systems for the use of rainwater, German and English version prEN 16941-1:2022
    01/09/2022 - PDF - Anglais, Allemand - DIN
    En savoir plus
    110,00 €

  • 22/30455824 DC:2022

    BS EN 16941-1. On-site non-potable water systems. Part 1. Systems for the use of rainwater
    25/08/2022 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • UNE-EN ISO 11298-4:2022

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    25/05/2022 - PDF - Espagnol - AENOR
    En savoir plus
    96,00 €

  • UNE-EN ISO 11298-4:2022

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021)
    25/05/2022 - PDF - Anglais - AENOR
    En savoir plus
    115,20 €

  • BS EN ISO 22391-3:2009+A2:2021

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fittings
    22/04/2022 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • DIN EN ISO 11298-4:2022-04

    Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021), German version EN ISO 11298-4:2021.
    01/04/2022 - PDF - Allemand - DIN
    En savoir plus
    126,26 €

  • FD ISO/TR 24539, P15-539 (03/2022)

    Activités de service relatives aux réseaux d'alimentation en eau potable, aux réseaux d'assainissement et aux réseaux de gestion des eaux pluviales - Exemples de bonnes pratiques en matière de gestion des eaux pluviales
    01/03/2022 - Papier - Français - AFNOR
    En savoir plus
    154,67 €

  • DVGW W 551-5:2022-01

    Hygiene in der Trinkwasser-Installation - Teil 5: Risikobewertung des stagnierenden Wassers in bestimmten Feuerlösch- und Brandschutzanlagen
    01/01/2022 - PDF - Allemand - DVGW
    En savoir plus
    41,95 €

  • DVGW GW 120:2021-12

    Network Documentation in Supply Companies
    01/12/2021 - PDF - Allemand - DVGW
    En savoir plus
    83,30 €

  • DVGW W 291:2021-12

    Cleaning and Disinfection of Drinking Water Distribution Systems
    01/12/2021 - PDF - Allemand - DVGW
    En savoir plus
    83,30 €

  • DIN EN 16941-2:2021-11

    On-site non-potable water systems - Part 2: Systems for the use of treated greywater, German version EN 16941-2:2021
    01/11/2021 - PDF - Allemand - DIN
    En savoir plus
    104,95 €

  • DVGW W 400-2:2021-11

    Technical Rules for Water Supply Systems - Part 2: Construction and Testing
    01/11/2021 - PDF - Allemand - DVGW
    En savoir plus
    115,71 €

  • DVGW W 1003:2021-11

    Resilience and Security of Drinking Water Supply
    01/11/2021 - PDF - Allemand - DVGW
    En savoir plus
    65,18 €

  • NBN EN ISO 22391-3:2009/A2:2021

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3: Raccords - Amendement 2 (ISO 22391-3:2009/Amd 2:2021)
    29/10/2021 - PDF - Français - NBN
    En savoir plus
    20,00 €

  • NBN EN ISO 22391-3:2009/A2:2021

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3: Raccords - Amendement 2 (ISO 22391-3:2009/Amd 2:2021)
    29/10/2021 - PDF - Allemand - NBN
    En savoir plus
    20,00 €

  • NBN EN ISO 22391-3:2009/A2:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 2 (ISO 22391-3:2009/Amd 2:2021)
    29/10/2021 - PDF - Anglais - NBN
    En savoir plus
    20,00 €

  • NF EN ISO 22391-3/A2, T54-982-3/A2 (10/2021)

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3 : raccords - Amendement 2
    01/10/2021 - Papier - Français - AFNOR
    En savoir plus
    60,67 €

  • UNE-EN ISO 22391-2:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
    29/09/2021 - PDF - Espagnol - AENOR
    En savoir plus
    39,00 €

  • UNE-EN ISO 22391-2:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes - Amendment 1 (ISO 22391-2:2009/Amd 1:2020)
    29/09/2021 - PDF - Anglais - AENOR
    En savoir plus
    46,80 €

  • UNE-EN ISO 22391-3:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
    29/09/2021 - PDF - Espagnol - AENOR
    En savoir plus
    34,00 €

  • UNE-EN ISO 22391-3:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings - Amendment 1 (ISO 22391-3:2009/Amd 1:2020)
    29/09/2021 - PDF - Anglais - AENOR
    En savoir plus
    40,80 €

  • UNE-EN ISO 22391-5:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    29/09/2021 - PDF - Espagnol - AENOR
    En savoir plus
    46,00 €

  • UNE-EN ISO 22391-5:2010/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    29/09/2021 - PDF - Anglais - AENOR
    En savoir plus
    55,20 €

  • UNE-EN 16941-2:2021

    On-site non-potable water systems - Part 2: Systems for the use of treated greywater
    01/09/2021 - PDF - Espagnol - AENOR
    En savoir plus
    74,00 €

  • UNE-EN 16941-2:2021

    On-site non-potable water systems - Part 2: Systems for the use of treated greywater
    01/09/2021 - PDF - Anglais - AENOR
    En savoir plus
    88,80 €

  • UNE-EN 16941-2:2021

    On-site non-potable water systems - Part 2: Systems for the use of treated greywater
    01/09/2021 - PDF - Français - AENOR
    En savoir plus
    88,80 €

  • NBN ISO 9349:2021

    Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages — Produits préisolés thermiques ISO 9349:2017
    02/06/2021 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN ISO 9349:2021

    Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages ? Produits préisolés thermiques
    02/06/2021 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • DVGW GW 1200:2021-06

    Objectives and Organisation for the Stand-by for Emergency Management for Gas and Water Grid Operators
    01/06/2021 - PDF - Allemand - DVGW
    En savoir plus
    65,18 €

  • BS EN ISO 22391-5:2009+A1:2020

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Fitness purpose the system
    14/05/2021 - PDF - Anglais - BSI
    En savoir plus
    180,00 €

  • PD ISO/TR 24539:2021

    Service activities relating to drinking water supply, wastewater and stormwater systems. Examples of good practices for stormwater management
    07/05/2021 - PDF - Anglais - BSI
    En savoir plus
    377,00 €

  • BS EN ISO 11298-4:2021

    Plastics piping systems for renovation of underground water supply networks Lining with cured-in-place pipes
    28/04/2021 - PDF - Anglais - BSI
    En savoir plus
    331,00 €

  • NBN EN ISO 11298-4:2021

    Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés d’alimentation en eau - Partie 4: Tubage continu par tubes polymérisés sur place (ISO 11298-4:2021)
    23/04/2021 - PDF - Français - NBN
    En savoir plus
    163,00 €

  • NBN EN ISO 11298-4:2021

    Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés d?alimentation en eau - Partie 4: Tubage continu par tubes polymérisés sur place (ISO 11298-4:2021)
    23/04/2021 - PDF - Allemand - NBN
    En savoir plus
    163,00 €

  • NBN EN ISO 11298-4:2021

    Systèmes de canalisation en plastique pour la rénovation des réseaux enterrés d?alimentation en eau - Partie 4: Tubage continu par tubes polymérisés sur place (ISO 11298-4:2021)
    23/04/2021 - PDF - Anglais - NBN
    En savoir plus
    163,00 €

  • NBN EN 16941-2:2021

    Réseaux d’eau non potable sur site - Partie 2 : Systèmes pour l’utilisation des eaux ménagères traitées
    25/02/2021 - PDF - Français - NBN
    En savoir plus
    142,00 €

  • NBN EN 16941-2:2021

    Réseaux d?eau non potable sur site - Partie 2 : Systèmes pour l?utilisation des eaux ménagères traitées
    25/02/2021 - PDF - Allemand - NBN
    En savoir plus
    142,00 €

  • NBN EN 16941-2:2021

    Réseaux d?eau non potable sur site - Partie 2 : Systèmes pour l?utilisation des eaux ménagères traitées
    25/02/2021 - PDF - Anglais - NBN
    En savoir plus
    142,00 €

  • BS EN 16941-2:2021

    On-site non-potable water systems Systems for the use of treated greywater
    02/02/2021 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • NBN EN ISO 22391-5:2009/A1:2021

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 22391-5:2009/Amd 1:2020, Version corrigée 2021-03)
    27/01/2021 - PDF - Français - NBN
    En savoir plus
    20,00 €

  • NBN EN ISO 22391-5:2009/A1:2021

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5: Aptitude à l'emploi du système - Amendement 1 (ISO 22391-5:2009/Amd 1:2020, Version corrigée 2021-03)
    27/01/2021 - PDF - Allemand - NBN
    En savoir plus
    20,00 €

  • NBN EN ISO 22391-5:2009/A1:2021

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 5: Fitness for purpose of the system - Amendment 1 (ISO 22391-5:2009/Amd 1:2020, Corrected version 2021-03)
    27/01/2021 - PDF - Anglais - NBN
    En savoir plus
    20,00 €

  • NF EN 16941-2, P16-941-2 (01/2021)

    Réseaux d'eau non potable sur site - Partie 2 : systèmes pour l'utilisation des eaux ménagères traitées
    01/01/2021 - Papier - Français - AFNOR
    En savoir plus
    86,67 €

  • DIN 3606:2021-01

    Pipe hoisting caps for casing pipes according to DIN 4918.
    01/01/2021 - PDF - Allemand - DIN
    En savoir plus
    32,34 €

  • BS EN ISO 22391-2:2009+A1:2020

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Pipes
    17/12/2020 - PDF - Anglais - BSI
    En savoir plus
    180,00 €

  • NF EN ISO 22391-2/A1, T54-982-2/A1 (12/2020)

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 2 : tubes - Amendement 1
    01/12/2020 - Papier - Français - AFNOR
    En savoir plus
    25,67 €

  • NF EN ISO 22391-3/A1, T54-982-3/A1 (12/2020)

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 3 : raccords - Amendement 1
    01/12/2020 - Papier - Français - AFNOR
    En savoir plus
    34,67 €

  • NF EN ISO 22391-5/A1, T54-982-5/A1 (12/2020)

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 5 : aptitude à l'emploi du système - Amendement 1
    01/12/2020 - Papier - Français - AFNOR
    En savoir plus
    34,67 €

  • DIN 4905:2020-09

    Hydraulic solidifying seals for well construction - Requirements and testing.
    01/09/2020 - PDF - Allemand - DIN
    En savoir plus
    52,90 €

  • DVGW W 399:2020-09

    Unplanned Supply Interruptions
    01/09/2020 - PDF - Allemand - DVGW
    En savoir plus
    39,65 €

  • DVGW W 300-5:2020-08

    Drinking Water Tanks - Part 5: Assessment of the Fitness of Use of Construction Products for Lining and Coating Systems
    01/08/2020 - PDF - Allemand - DVGW
    En savoir plus
    61,59 €

  • ASTM D5716/D5716M-20

    Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
    01/06/2020 - PDF - Anglais - ASTM
    En savoir plus
    51,00 €

  • ASTM D5716/D5716M-20 + Redline

    Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
    01/06/2020 - PDF - Anglais - ASTM
    En savoir plus
    61,00 €

  • DVGW W 557:2020-05

    Cleaning and Disinfection of Drinking Water Installations
    01/05/2020 - PDF - Allemand - DVGW
    En savoir plus
    78,74 €

  • NF ISO 24536, P15-926 (03/2020)

    Activités de service relatives aux réseaux d'alimentation en eau potable, aux réseaux d'assainissement et aux réseaux de gestion des eaux pluviales - Gestion des eaux pluviales - Lignes directrices pour la gestion des eaux pluviales en zones urbaines
    01/03/2020 - Papier - Français - AFNOR
    En savoir plus
    130,50 €

  • BS EN ISO 11298-3:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    27/02/2020 - PDF - Anglais - BSI
    En savoir plus
    326,00 €

  • BS EN ISO 11298-1:2018 + Redline

    Tracked Changes. Plastics piping systems for renovation of underground water supply networks General
    27/02/2020 - PDF - Anglais - BSI
    En savoir plus
    326,00 €

  • BS ISO 9349:2017 + Redline

    Tracked Changes. Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
    27/02/2020 - PDF - Anglais - BSI
    En savoir plus
    235,00 €

  • PD CEN ISO/TS 22391-7:2018 + Redline

    Tracked Changes. Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance the assessment conformity
    24/02/2020 - PDF - Anglais - BSI
    En savoir plus
    326,00 €

  • BS ISO 4427-3:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
    24/02/2020 - PDF - Anglais - BSI
    En savoir plus
    382,00 €

  • BS ISO 4427-1:2019 + Redline

    Tracked Changes. Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    24/02/2020 - PDF - Anglais - BSI
    En savoir plus
    326,00 €

  • DVGW W 616:2020-01

    Sensor-supported operation monitoring of pump systems in the drinking water supply
    01/01/2020 - PDF - Allemand - DVGW
    En savoir plus
    61,59 €

  • BS ISO 24536:2019

    Service activities relating to drinking water supply, wastewater and stormwater systems. Stormwater management. Guidelines for stormwater management in urban areas
    15/10/2019 - PDF - Anglais - BSI
    En savoir plus
    348,00 €

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    25/09/2019 - PDF - Espagnol - AENOR
    En savoir plus
    71,00 €

  • UNE-EN ISO 11298-3:2019

    Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018)
    25/09/2019 - PDF - Anglais - AENOR
    En savoir plus
    85,20 €

  • DIN 18319:2019-09

    German construction contract procedures (VOB) - Part C: General technical specifications in construction contracts (ATV) - Trenchless pipelaying
    01/09/2019 - PDF - Allemand - DIN
    En savoir plus
    45,98 €

  • BS ISO 4427-5:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fitness purpose of the system
    15/08/2019 - PDF - Anglais - BSI
    En savoir plus
    180,00 €

  • BS ISO 4427-3:2019

    Plastics piping systems for water supply, and drainage sewerage under pressure. Polyethylene (PE) Fittings
    15/08/2019 - PDF - Anglais - BSI
    En savoir plus
    293,00 €

  • BS ISO 4427-1:2019

    Plastics piping systems for water supply and drainage sewerage under pressure. Polyethylene (PE) General
    15/08/2019 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • 19/30385511 DC:2019

    BS ISO 21307 AMD1. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) piping systems
    21/05/2019 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • ASTM E2728-19

    Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
    01/05/2019 - PDF - Anglais - ASTM
    En savoir plus
    51,00 €

  • ASTM E2728-19 + Redline

    Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
    01/05/2019 - PDF - Anglais - ASTM
    En savoir plus
    61,00 €

  • DIN CEN ISO/TS 22391-7*DIN SPEC 19576:2019-04

    Plastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 7: Guidance for the assessment of conformity (ISO/TS 22391-7:2018), German and English version CEN ISO/TS 22391-7:2018.
    01/04/2019 - PDF - Anglais, Allemand - DIN
    En savoir plus
    79,63 €

  • UNE-EN 16941-1:2019

    On-site non-potable water systems - Part 1: Systems for the use of rainwater
    06/03/2019 - PDF - Espagnol - AENOR
    En savoir plus
    83,00 €

  • UNE-EN 16941-1:2019

    On-site non-potable water systems - Part 1: Systems for the use of rainwater
    06/03/2019 - PDF - Anglais - AENOR
    En savoir plus
    99,60 €

  • PD CEN ISO/TS 22391-7:2018

    Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) Guidance the assessment conformity
    14/01/2019 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • CEN ISO/TS 22391-7:2018

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 7: Guide pour l'évaluation de la conformité (ISO/TS 22391-7:2018)
    21/12/2018 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • CEN ISO/TS 22391-7:2018

    Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène de meilleure résistance à la température (PE-RT) - Partie 7: Guide pour l'évaluation de la conformité (ISO/TS 22391-7:2018)
    21/12/2018 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • DIN SPEC 31062:2018-12

    Planification et fonctionnement de fontaine
    01/12/2018 - PDF - Allemand - DIN
    En savoir plus
    122,15 €

  • DIN EN ISO 11298-3:2018-12

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 3: Tubage par tuyau continu sans espace annulaire (ISO 11298-3:2018), Version allemande EN ISO 11298-3:2018
    01/12/2018 - PDF - Allemand - DIN
    En savoir plus
    85,79 €

  • NBN EN ISO 11298-3:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 3: Tubage par tuyau continu sans espace annulaire (ISO 11298-3:2018)
    27/11/2018 - PDF - Français - NBN
    En savoir plus
    89,00 €

  • NBN EN ISO 11298-3:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 3: Tubage par tuyau continu sans espace annulaire (ISO 11298-3:2018)
    27/11/2018 - PDF - Allemand - NBN
    En savoir plus
    89,00 €

  • NBN EN ISO 11298-3:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 3: Tubage par tuyau continu sans espace annulaire (ISO 11298-3:2018)
    27/11/2018 - PDF - Anglais - NBN
    En savoir plus
    89,00 €

  • ASTM D5299/D5299M-18

    Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
    15/11/2018 - PDF - Anglais - ASTM
    En savoir plus
    57,00 €

  • ASTM D5299/D5299M-18 + Redline

    Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
    15/11/2018 - PDF - Anglais - ASTM
    En savoir plus
    68,00 €

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    07/11/2018 - PDF - Espagnol - AENOR
    En savoir plus
    70,00 €

  • UNE-EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018)
    07/11/2018 - PDF - Anglais - AENOR
    En savoir plus
    84,00 €

  • BS EN ISO 11298-3:2018

    Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes
    18/10/2018 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • DVGW W 214-3:2018-09

    pH-Adjustment in Drinking Water Treatment - Part 3: Planning and Operation of Systems for Carbon Dioxide Removal
    01/09/2018 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • ISO 11298-3:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau
    Partie 3: Tubage par tuyau continu sans espace annulaire
    31/08/2018 - Papier - Français - ISO
    En savoir plus
    110,00 €

  • ISO 11298-3:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau
    Partie 3: Tubage par tuyau continu sans espace annulaire
    31/08/2018 - Papier - Anglais - ISO
    En savoir plus
    110,00 €

  • BS EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks Lining with continuous pipes
    02/08/2018 - PDF - Anglais - BSI
    En savoir plus
    180,00 €

  • UNE-EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
    25/07/2018 - PDF - Espagnol - AENOR
    En savoir plus
    68,00 €

  • UNE-EN ISO 11298-2:2018

    Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018)
    25/07/2018 - PDF - Anglais - AENOR
    En savoir plus
    81,60 €

  • DIN 1998:2018-07

    Placement des conduits de service dans les zones de circulation publiques - Lignes directrices pour la planification
    01/07/2018 - PDF - Allemand - DIN
    En savoir plus
    59,63 €

  • DIN EN ISO 11298-1:2018-07

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 1: Généralités (ISO 11298-1:2018), Version allemande EN ISO 11298-1:2018
    01/07/2018 - PDF - Anglais - DIN
    En savoir plus
    107,48 €

  • DIN EN ISO 11298-1:2018-07

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 1: Généralités (ISO 11298-1:2018), Version allemande EN ISO 11298-1:2018
    01/07/2018 - PDF - Allemand - DIN
    En savoir plus
    85,79 €

  • ASTM E3136-18

    Standard Guide for Climate Resiliency in Water Resources
    01/07/2018 - PDF - Anglais - ASTM
    En savoir plus
    60,00 €

  • ASTM E3136-18 + Redline

    Standard Guide for Climate Resiliency in Water Resources
    01/07/2018 - PDF - Anglais - ASTM
    En savoir plus
    72,00 €

  • DIN EN 16941-1:2018-06

    Réseaux d'eau non potable sur site - Partie 1: Systèmes pour l'utilisation de l'eau de pluie, Version allemande EN 16941-1:2018
    01/06/2018 - PDF - Allemand - DIN
    En savoir plus
    104,95 €

  • DIN EN 16941-1:2018-06

    Réseaux d'eau non potable sur site - Partie 1: Systèmes pour l'utilisation de l'eau de pluie, Version allemande EN 16941-1:2018
    01/06/2018 - PDF - Anglais - DIN
    En savoir plus
    131,40 €

  • DIN EN ISO 11298-2:2018-05

    Systèmes de canalisation en plastiques pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 11298-2:2018), Version allemande EN ISO 11298-2:2018
    01/05/2018 - PDF - Allemand - DIN
    En savoir plus
    72,80 €

  • DIN EN ISO 11298-2:2018-05

    Systèmes de canalisation en plastiques pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 11298-2:2018), Version allemande EN ISO 11298-2:2018
    01/05/2018 - PDF - Anglais - DIN
    En savoir plus
    91,12 €

  • NBN EN ISO 11298-1:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 1: Généralités (ISO 11298-1:2018)
    27/04/2018 - PDF - Français - NBN
    En savoir plus
    89,00 €

  • NBN EN ISO 11298-1:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 1: Généralités (ISO 11298-1:2018)
    27/04/2018 - PDF - Allemand - NBN
    En savoir plus
    89,00 €

  • NBN EN ISO 11298-1:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau - Partie 1: Généralités (ISO 11298-1:2018)
    27/04/2018 - PDF - Anglais - NBN
    En savoir plus
    89,00 €

  • BS EN ISO 11298-1:2018

    Plastics piping systems for renovation of underground water supply networks General
    13/04/2018 - PDF - Anglais - BSI
    En savoir plus
    250,00 €

  • DIN 1239:2018-04

    Convertures pour des fontaines, des sources et d'autre constructions d'alimentation d'eau - Principes de construction
    01/04/2018 - PDF - Allemand - DIN
    En savoir plus
    72,80 €

  • DVGW W 271:2018-04

    Invertebrates in Water Supply Facilities - Occurrence and Recommendations for Dealing with
    01/04/2018 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • NBN EN ISO 11298-2:2018

    Systémes de canalisation en plastiques pour la rénovation des réseaux enterrés d’alimentation en eau - Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 11298-2:2018)
    23/03/2018 - PDF - Français - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 11298-2:2018

    Systémes de canalisation en plastiques pour la rénovation des réseaux enterrés d?alimentation en eau - Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 11298-2:2018)
    23/03/2018 - PDF - Allemand - NBN
    En savoir plus
    58,00 €

  • NBN EN ISO 11298-2:2018

    Systémes de canalisation en plastiques pour la rénovation des réseaux enterrés d?alimentation en eau - Partie 2: Tubage par tuyau continu avec espace annulaire (ISO 11298-2:2018)
    23/03/2018 - PDF - Anglais - NBN
    En savoir plus
    58,00 €

  • VDI 2069:2018-03

    Preventing freezing of water-carrying pipes
    01/03/2018 - PDF - Anglais, Allemand - VDI
    En savoir plus
    115,75 €

  • ISO 11298-1:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau
    Partie 1: Généralités
    26/02/2018 - Papier - Français - ISO
    En savoir plus
    110,00 €

  • ISO 11298-1:2018

    Systèmes de canalisations en plastique pour la rénovation des réseaux enterrés d'alimentation en eau
    Partie 1: Généralités
    26/02/2018 - Papier - Anglais - ISO
    En savoir plus
    110,00 €

  • NF ISO 9349, A48-490 (02/2018)

    Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages - Produits préisolés thermiques
    01/02/2018 - Papier - Français - AFNOR
    En savoir plus
    46,55 €

  • 18/30320655 DC:2018

    BS ISO 20325. Service activities relating to drinking water supply and wastewater systems. Stormwater management. Guidelines for stormwater management in urban areas
    02/01/2018 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • NF EN 16941-1, P16-941-1 (01/2018)

    Réseaux d'eau non potable sur site - Partie 1 : systèmes pour l'utilisation de l'eau de pluie
    01/01/2018 - Papier - Français - AFNOR
    En savoir plus
    96,12 €

  • JIS K 6761:2017

    Polyethylene pipes for general purposes
    20/11/2017 - PDF - Japonais - JSA
    En savoir plus
    41,86 €

  • DIN 4904:2017-10

    Pierre coulé d'étanchéité pour la construction de fontaine - Exigence et examination
    01/10/2017 - PDF - Allemand - DIN
    En savoir plus
    59,63 €

  • DVGW W 392:2017-09

    Water Loss in Pipeline Networks - Determination, Water Balance, Performance Indicators, Monitoring
    01/09/2017 - PDF - Allemand - DVGW
    En savoir plus
    61,59 €

  • DVGW W 400-3-B1:2017-09

    Technical rules for Water Supply Systems - Part 3: Operation and Maintenance - Supplement 1: Inspection and Servicing of Distribution Systems
    01/09/2017 - PDF - Allemand - DVGW
    En savoir plus
    43,76 €

  • DVGW W 1060:2017-08

    IT-Security - Standard for Water Supply/Waste Water Utilities
    01/08/2017 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DIN 4918:2017-04

    Tubes sans soudure à raccords filetés pour tubages de trous de forage
    01/04/2017 - PDF - Allemand - DIN
    En savoir plus
    45,98 €

  • BS ISO 9349:2017

    Ductile iron pipes, fittings, accessories and their joints. Thermal preinsulated products
    31/03/2017 - PDF - Anglais - BSI
    En savoir plus
    180,00 €

  • DIN 4926:2016-12

    Têtes de puits en acier - DN 300 à DN 1200
    01/12/2016 - PDF - Allemand - DIN
    En savoir plus
    65,89 €

  • DVGW W 635:2016-10

    High-Voltage and Low-Voltage Equipment in Water Supply Systems, Substitute Power Supply Systems with Power Generators, Battery Installations, uninterruptable Power Supply Systems
    01/10/2016 - PDF - Allemand - DVGW
    En savoir plus
    83,30 €

  • DVGW W 300-8:2016-10

    Drinking Water Tanks - Recommendations for Practice of Hygiene Concept: Construction and Rehabilitation
    01/10/2016 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DVGW W 300-7:2016-09

    Drinking WaterTanks - Part 7: Recommendations for Practice of Cleaning and Disinfection Concept
    01/09/2016 - PDF - Allemand - DVGW
    En savoir plus
    43,76 €

  • DVGW W 300-6:2016-09

    Drinking Water Tanks - Design, Construction, Operation and Maintenance of System and prefabricated Tanks
    01/09/2016 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • ASTM D8006-16

    Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&,P) Operations
    01/03/2016 - PDF - Anglais - ASTM
    En savoir plus
    51,00 €

  • ASTM D8006-16 + Redline

    Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&,P) Operations
    01/03/2016 - PDF - Anglais - ASTM
    En savoir plus
    61,00 €

  • DVGW GW 125-B1:2016-03

    1. Beiblatt zu GW 125 Bäume, unterirdische Leitungen und Kanäle: Beurteilungskriterien für Baumwurzel-Gasrohrleitungs-Interaktionen
    01/03/2016 - PDF - Allemand - DVGW
    En savoir plus
    43,76 €

  • DVGW W 1100-3:2016-02

    Structural Conditions of Water Supply Systems
    01/02/2016 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • DVGW W 1100-2:2016-02

    Definitions of Main Performance Indicators in Water Supply
    01/02/2016 - PDF - Allemand - DVGW
    En savoir plus
    150,65 €

  • DVGW GW 130:2016-01

    Quality Assurance in Network Documentation
    01/01/2016 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DVGW W 1000:2016-01

    Requirements on the Qualification and Organisation of Drinking Water Utilities
    01/01/2016 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • 15/30316134 DC:2015

    BS ISO 21307. Plastics pipes and fittings. Butt fusion jointing procedures for polyethylene (PE) pipes and fittings used in the construction of gas and water distribution systems
    30/10/2015 - PDF - Anglais - BSI
    En savoir plus
    24,00 €

  • BS EN ISO 1452-3:2010

    Plastics piping systems for water supply and buried above-ground drainage sewerage under pressure. Unplasticized poly(vinyl chloride) (PVC-U) Fittings
    31/08/2015 - PDF - Anglais - BSI
    En savoir plus
    331,00 €

  • DVGW W 111:2015-03

    Pumping test during water development
    01/03/2015 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • DVGW W 1001-B2:2015-03

    Safe and secure drinking water supply - risk management under normal operationg conditions - Supplement 2: Risk management of catchment areas for groundwater abstraction
    01/03/2015 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • DVGW W 400-1:2015-02

    Technical rules for water supply systems - Part 1: Design
    01/02/2015 - - - DVGW
    En savoir plus
    De: 86,89 €

  • DVGW W 300-1:2014-10

    Drinking Water Tanks - Part 1: Design and Construction
    01/10/2014 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • DVGW W 300-2:2014-10

    Drinking Water Tanks - Part 2: Operation and Maintenance
    01/10/2014 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DVGW W 300-3:2014-10

    Drinking Water Tanks - Part 3: Rehabilitation and Improvement
    01/10/2014 - PDF - Allemand - DVGW
    En savoir plus
    86,89 €

  • DVGW W 300-4:2014-10

    Drinking Water Tanks - Part 4: Materials, Lining and Coating Systems - Principles and Quality Management on the Construction Site
    01/10/2014 - PDF - Allemand - DVGW
    En savoir plus
    121,30 €

  • JIS K 6762/AMENDMENT 1:2014

    Double wall polyethylene pipes for water supply (Amendment 1)
    22/09/2014 - PDF - Japonais - JSA
    En savoir plus
    32,50 €

  • DVGW W 386:2014-09

    Hydranten in der Trinkwasserverteilung - Anforderungen und Prüfungen
    01/09/2014 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DIN 4924:2014-07

    Sables et graviers pour le construction de fontaine - Exigence et examination
    01/07/2014 - PDF - Allemand - DIN
    En savoir plus
    45,98 €

  • XP CEN/TS 12201-7, T54-063-7 (05/2014)

    Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 7 : guide pour l'évaluation de la conformité
    01/05/2014 - Papier - Français - AFNOR
    En savoir plus
    99,00 €

  • DVGW GW 312:2014-03

    Statische Berechnung von Vortriebsrohren
    01/03/2014 - PDF - Allemand - DVGW
    En savoir plus
    157,11 €

  • DWA-A 161:2014-03

    Statische Berechnung von Vortriebsrohren
    01/03/2014 - PDF - Allemand - DWA
    En savoir plus
    107,90 €

  • PD ISO/TR 4191:2014

    Plastics piping systems for water supply. Unplasticized poly(vinyl chloride)(PVC-U) and oriented PVC-U (PVC-O). Guidance for installation
    28/02/2014 - PDF - Anglais - BSI
    En savoir plus
    348,00 €

  • DVGW W 336:2013-10

    Wasseranbohrarmaturen, Anforderungen und Prüfungen
    01/10/2013 - PDF - Allemand - DVGW
    En savoir plus
    86,89 €

  • DVGW W 122:2013-08

    Abschlussbauwerke für Brunnen der Wassergewinnung
    01/08/2013 - PDF - Allemand - DVGW
    En savoir plus
    86,89 €

  • DVGW W 120-2:2013-07

    Qualifikationsanforderungen für die Bereiche Bohrtechnik und oberflächennahe Geothermie (Erdwärmesonden)
    01/07/2013 - PDF - Allemand - DVGW
    En savoir plus
    65,18 €

  • DVGW W 398:2013-01

    Praxishinweise zur hygienischen Eignung von Ortbeton und vor Ort hergestellten zementgebundenen Werkstoffen zur Trinkwasserspeicherung
    01/01/2013 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • XP CEN/TS 14632, T57-232 (09/2012)

    Systèmes de canalisations en plastique pour les branchements, les collecteurs d'assainissement et l'alimentation en eau, avec ou sans pression - Plastiques thermodurcissables renforcés de verre (PRV) à base de résine polyester (UP) - Guide pour l'évaluation de conformité
    01/09/2012 - Papier - Français - AFNOR
    En savoir plus
    86,67 €

  • DVGW W 120-1:2012-08

    Qualifikationsanforderungen für die Bereiche Bohrtechnik, Brunnenbau, -regenerierung, -sanierung und -rückbau
    01/08/2012 - PDF - Allemand - DVGW
    En savoir plus
    65,18 €

  • DIN 1988-200:2012-05

    Directives techniques pour installations d'eau potable - Partie 200: Installation Type A (système fermé) - Planification, éléments de construction, appareils, matériaux, Directive technique DVGW
    01/05/2012 - PDF - Allemand - DIN
    En savoir plus
    120,84 €

  • DIN 1988-200:2012-05

    Directives techniques pour installations d'eau potable - Partie 200: Installation Type A (système fermé) - Planification, éléments de construction, appareils, matériaux, Directive technique DVGW
    01/05/2012 - PDF - Anglais - DIN
    En savoir plus
    150,93 €

  • DVGW W 1050:2012-04

    Objektschutz von Wasserversorgungsanlagen
    01/04/2012 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • JIS Q 24512:2012 (R2016)

    Activities relating to drinking water and wastewater services - Guidelines for the management of drinking water utilities and for the assessment of drinking water services
    21/03/2012 - PDF - Japonais - JSA
    En savoir plus
    50,18 €

  • DIN SPEC 19757:2012-03

    Activités relatives aux services de l'eau potable et de l'assainissement - Lignes directrices pour le management des services publics de l'eau potable et pour l'évaluation des services fournis
    01/03/2012 - PDF - Anglais, Allemand - DIN
    En savoir plus
    187,10 €

  • DVGW W 307:2012-02

    Verfüllung des Ringraums zwischen Mantel- und Produktrohren bei der Kreuzung von Bahnanlagen, Straßen und Wasserstraßen
    01/02/2012 - PDF - Allemand - DVGW
    En savoir plus
    67,95 €

  • DVGW W 578 DVGW VP 578:2012-02

    Kombinations-Eckventil mit Geräteanschluss, Anforderungen und Prüfungen
    01/02/2012 - PDF - Allemand - DVGW
    En savoir plus
    43,76 €

  • DVGW W 1001-B1:2011-11

    Sicherheit in der Trinkwasserversorgung - Risikomanagement im Normalbetrieb - Beiblatt 1: Umsetzung für Wasserverteilungsanlagen
    01/11/2011 - PDF - Allemand - DVGW
    En savoir plus
    43,76 €

  • DIN 1988-100:2011-08

    Directives techniques relatives pour installations d'eau potable - Partie 100: Protection de l'eau potable, maintien de la qualité de l'eau potable, Directive technique DVGW
    01/08/2011 - PDF - Allemand - DIN
    En savoir plus
    72,80 €

  • DIN 1988-100:2011-08

    Directives techniques relatives pour installations d'eau potable - Partie 100: Protection de l'eau potable, maintien de la qualité de l'eau potable, Directive technique DVGW
    01/08/2011 - PDF - Anglais - DIN
    En savoir plus
    91,12 €

  • NF EN ISO 1452-5, T54-016-5 (04/2011)

    Systèmes de canalisations en plastique pour l'alimentation en eau, pour branchements et collecteurs d'assainissement enterrés et aériens avec pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 5 : aptitude à l'emploi du système
    01/04/2011 - Papier - Français - AFNOR
    En savoir plus
    73,00 €

  • UNE-EN ISO 1452-3:2011

    Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 3: Fittings (ISO 1452-3:2009, corrected version 2010-03-01)
    02/03/2011 - PDF - Espagnol - AENOR
    En savoir plus
    90,00 €

Total des articles 1 à 200 de 304

Par ordre croissant
par page

Liste  Grille 

Page:
  1. 1
  2. 2