DIN EN 13036-1:2010-10

DIN EN 13036-1:2010-10

Caractéristiques de surface des routes et aérodromes - Méthodes d'essai - Partie 1: Mesurage de la profondeur de macrotexture de la surface d'un revêtement à l'aide d'une technique volumétrique à la tache, Version allemande EN 13036-1:2010

Disponibilité: En stock.

74,58 €

Détails

This European Standard specifies a method for determining the average depth of pavement surface macrotexture by careful application of a known volume of material on the surface and subsequent measurement of the total area covered. The technique is designed to provide an average depth value of only the pavement macrotexture and is considered insensitive to pavement microtexture characteristics. This test method is suitable for field tests to determine the average macrotexture depth of a pavement surface. When used in conjunction with other physical tests, the macrotexture depth values derived from this test method can be used to determine the pavement skid resistance capability, noise characteristics and the suitability of paving materials or finishing techniques. When used with other tests, care should be taken that all tests are applied at the same location.

Informations supplémentaires

Auteur Deutsche Institut für Normung e.V. (DIN)
Edité par DIN
Type de document Norme
ICS 93.080.10 : Construction des routes
93.120 : Construction des aéroports
17.040.20 : Etat de surfaces
Nombre de pages 13
Remplace DIN EN 13036-1(2001-08)
Produits apparentés EN 13036-1 (2010-05), IDT
Recueil MYSTD-20STD
Historique DIN EN 13036-1 (2010-10),DIN EN 13036-1 (2009-10),DIN EN 13036-1 (2001-08),DIN EN 13036-1 (2000-06)
Mot-clé DIN EN 13036-1