AWS NAVSEA B2.1-1-302:2015

AWS NAVSEA B2.1-1-302:2015

Standard Welding Procedure Specification for Naval Applications (SWPS-N)

360,80 €

Détails

This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 1-1/2 inch [38 mm], using manual shielded metal arc welding. It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and joint designs for groove and fillet welds. This SWPS-N was developed primarily for naval applications that require performance to NAVSEA Technical Publication S9074-AQ-GIB- 010/248, Requirements for Welding and Brazing Procedure and Performance Qualification.
Scope : The data to support this Standard Welding Procedure Specification for Naval Applications (SWPS-N) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This SWPS-N is not valid using conditions and variables outside the ranges listed. The American Welding Society and Naval Sea Systems Command (NAVSEA) consider that this SWPS-N presents information for producing an acceptable weld using the conditions and variables listed. This procedure is intended to be used for groove and fillet welds. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this SWPS-N

Informations supplémentaires

Auteur American Welding Society (AWS)
Edité par AWS
Type de document Norme
ICS 25.160.10 : Procédés de soudage
Nombre de pages 27
Mot-clé B2.1-1-302, Reference Materials, Procedure,Naval Applications