AWS B2.1-1-205:2019

AWS B2.1-1-205:2019

Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1, Group 1 or 2), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, E6010 (Vertical Uphill) Followed by E7018 (Vertical Uphill), in the As-Welded or PWHT Condition, Primarily Pipe Applications

360,80 €
Me prévenir en cas d'actualité sur ce produit

Détails

This standard contains the essential welding variables for carbon steel in the thickness range of 1/8 inch [3 mm] through 1-1/2 inch [38 mm], using manual shielded metal arc welding with E6010 (vertical uphill) followed by E7018 (vertical uphill). It cites the base metals and operating conditions necessary to make the weldment, the filler metal specifications, and the allowable joint designs for fillet and groove welds. This SWPS was developed primarily for pipe applications.
Scope : The data to support this Standard Welding Procedure Specification (WPS) have been derived from the above listed Procedure Qualification Records (PQRs) which were reviewed and validated under the auspices of the Welding Research Council. This Standard WPS is not valid using conditions and variables outside the ranges listed. The American Welding Society considers that this Standard WPS presents information for producing an acceptable weld using the conditions and variables listed. The user needs a significant knowledge of welding and accepts full responsibility for the performance of the weld and for providing the engineering capability, qualified personnel, and proper equipment to implement this Standard WPS..

Informations supplémentaires

Auteur AWS American Welding Society
Edité par AWS
Type de document Norme
ICS 25.160.10 : Procédés de soudage
Nombre de pages 26
Remplace AWS B2.1-1-205:R2007
Mot-clé B2.1-1-205, Reference Materials, Shielded Metal Arc Welding, (M-1/P-1/S-1, Group 1 or 2), E6010,Vertical Uphill,E7018,Vertical Uphill, Primarily Pipe Applications