ASTM D1555M-22 + Redline

ASTM D1555M-22 + Redline

Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

Disponibilité: En stock.

68,00 €

Détails

1.1 This standard is for use in calculating the weight and volume of benzene, toluene, mixed xylenes, styrene, ortho-xylene, meta-xylene, para-xylene, cumene, ethylbenzene, 148.9 to 176.7?°C and 176.7 to 204.4?°C aromatic hydrocarbons, and cyclohexane. A method is given for calculating the volume at a given temperature from an observed volume at an observed temperature, t?°C. Table 1 lists the density in Vacuo at 15?°F and 20?°C for chemicals used to develop the relationship. Densities (or weights) “in vacuo” represent the true density (or weight) if measured in a vacuum without the buoyancy effect of air acting on the liquid. It is representative of the actual amount of product present. Densities (or weights) “in air” represent what would be measured on a scale. The difference is on the order of 0.13?%. Modern densitometers measure density in vacuo and the ASTM recommends the use of in vacuo densities (or weights).

1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.

1.2.1 A complete inch-pound unit companion standard has been developed in Test Method D1555.

1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.


Significance and Use:

3.1 This test method is suitable for use in calculating weights and volumes of the products outlined in Section 1. The information presented in this method can be used for determining quantities of the above-stated aromatic hydrocarbons in tanks, shipping containers, etc.

Informations supplémentaires

Auteur American Society for Testing and Materials (ASTM International)
Comité D16.01 - Committee D16 on Aromatic, Industrial, Specialty and Related Chemicals
Edité par ASTM
Type de document Norme
Thème ,Aromatic hydrocarbons
ICS 71.080.15 : Hydrocarbures aromatiques
Nombre de pages 11
Remplace ASTM D1555M-16 + Redline
Recueil ASTM Volume 06.04 - Multi-User - Single-Site Online
Mot-clé D1555M

Vous pourriez aussi être intéressé(e) par le(s) produit(s) suivant(s)