SME
-
SME EM00-100
Application And Manufacture Of Aluminum Metal Matrix Composite Components In Light Vehicles
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-194:2000
Environmentally-Conscious Minimum Quantity Lubrication (Mql) For Internal Cylindrical Grinding
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-229:2000
An Experimental Investigation Into The Deflection Of A Fixture-Workpiece System
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME CM00-123
Determination Of Heat Transfer Boundary Conditions Of Quenching Operations In Heat Treating Processes
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-211
Analysis Of Sound Signal Characteristics Associated With Adhesive Wear In Machining
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-196:2000
Tool Life When Turning Gamma Titanium Aluminide Using Carbide With Pcd Tools With Reduced Depths Of Cut And High Pressure Cutting Fluid
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MM00-151
Time-Based Supply Management: Managing The Extended Enterprise
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MM00-152
Using Simulation Tools For Analyzing And Designing Logistic Systems
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-187
Investigating Process Induced Micro Voids Effect On The Elastic Properties Of Lcm Polymer Composites
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR00-113
Axial Force And Drilling Torque Measurement At Curved Cutting Edge Of The Working Drill
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME AD00-155
Advanced Design Fatigue Resistant Rivetless Nut Plate System
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-224
Mass Vs. Lean Plant Design Evaluation Using The Production System Design Decomposition
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EM00-103
Use Of Sensors And Simulations For Strategic Control Of Liquid Composite Mold Filling Process
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME AD00-141
Aerobic Adhesives Vii - A New High Performance Bonding Option For Optical Assembly
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MS00-220
Basic Study On Development Of Sensor To Detect Cutting Force Components Based On Villari Effect
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-217
Managing Machine Tool Information: The Path From Standardization To Implementation
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-176
Influence Of Temperature And Strain Rate On Plastic Instability During Deep Drawing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME IQ00-244
Smart Composites Applied To Continuous In-Service Damage Monitoring Of Glass/Polymer Industrial Parts
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-243:2000
Material Characterization And Computer Modeling Helps Optimize Products And Their Manufacturing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EE00-161
Process Parameters Optimization For Mass Reflow 02\01 Components
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-160:2000
Minimizing Distortion By Accounting For Residual Stresses During Machining
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME CM00-124
Specifying Equipment For Induction Heating: Basics Of Surface Hardening
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-214
A Computational Approach To Evaluate Surface Integrity Of Glass Ceramics
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-180
Process Optimal Design In Metal Forming By Double-Objective Genetic Algorithm
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-208
Influence Of Electrode Materials And Polarities On The Electrode Erosion Rates In Edm
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-132:2000
How To Best Make Use Of The High Speed Machining Capabilities Of Your Control
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-175
Open-Loop Optimization Of The Sheet Metal Drawing Process With Active Drawbeads
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-135
Validation Of Computer Simulation Prediction Accuracy On A Fender Outer Hard Die Tryout
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EE00-249
Optical Fiber Sensor To Monitor The Chemical Degradation Of Frp
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-228:2000
A Quality Forecasting System For Glass Melting Processes Using Genetic Algorithms
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-197:2000
Mechanically And Thermally Coupled Finite Element Analysis Of Chip Formation In Metal Cutting
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-186
Integration Of Process Modeling And Design Of Experiments For Improving The Pouring Phase Of The Die Casting Process
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-173
Finite Element Simulation Of Orbital Forging Of Large Disk With Rocking Die Using Axi-Symmetric Approximation
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-182
Investigation Of A Double Reduction Die For Reduced End Cracking During Cold Extrusion
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-240:2000
Fuzzy Logic Connectivity In Semiconductor Defect Clustering
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-179
Analysis And Design Of Hydroforming Processes By The Rigid-Plastic Finite Element Method
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-162:2000
Effects Of Post-Reflow Cleaning Processes On The Performance Of Flip-Chip Devices
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-205
Effect Of Process Parameters Upon Tool Wear Of Ball-Nose End Mills
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF0-181
Prediction Of Ductile Fracture In Forward Extrusion With Spherical Dies
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR00-193:2000
Mechanistic Prediction Of Drilling Forces Incorporating A Minimum Cutting Energy Model For Chip Flow Angle
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME EM00-105
Thermoplastic Composite Mats: New Products, New Partnerships
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-191:2000
Effects Of Cutter Orientation When Ball Nose End Milling Inconel 718 (Tm)
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-250:2000
Validation And Updating Of An Aero Engine Finite Element Model Based On Static Stiffness Testing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-118
Polymer Quench Bath Maintenance: The Role Of Cooling Curve Analysis
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EM00-247
Subsonic And Intersonic Dynamic Crack Growth In Unidirectional Composites
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-108
What You Should Know About Bend Radii And Bend Deductions
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-206
A Study On The Effect Of Process Parameters On Surface Finish Of Drilled Holes
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EE00-140:2000
Parylene Conformal Coating Compatibility Evaluation With No-Clean Solder Pastes, Wave Solder Fluxes And Flux Cored Wire Solders
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-183
Intermediate Die Design System For The Multi-Stage Drawing Process
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-219
Development Of A Drilling Burr Control Chart For Stainless Steel
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EM00-102
Fire Performance And Structural Evaluation Of Aircraft Composite Materials
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-203:2000
On The Prediction Of Friction Force At Workpiece-Fixture Interface
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR00-213
Development Of A Quartz Dissolution Model For Vitrified Grinding Wheel Bonding Systems
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-231:2000
Cutting Tool Identification System For Accident-Free Machining
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME PE00-171:2000
Selecting Either Layered Manufacturing Or Cnc Machining To Build Your Prototype
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-192:2000
Prediction And Validation Of Chip Up-Curl In Machining Using The Universal Slip-Line Model
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME CM00-109
Tips For Heat Treat, Stress Relief And Creep-Straightening Of Titanium For The F-22 Raptor
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-134
Stretch Bending Of Aluminum Profiles: Analysis Of Distortions & Springback
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME CM00-130
Automatic Verification Of Inductive Hardening Using Eddy Current And Preventive Multi-Frequency Testing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-174
Optimal Condition For Embossing Process Of Electron Gun Part
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MR00-110
Abstract To Machining Difficult Part Features In Titanium For The F-22 Raptor
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-199:2000
Residual Stress Formation Mechanism And Its Control By Sequential Cuts
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-122:2000
Calculation, Manufacturing And Applications Of Cylkro Face Gear Transmissions
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EE00-159:2000
Accepting Environmental Responsibility In The Electronic Assembly Industry
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-212
Fabrication Of Micro Shapes Of Advanced Materials By Elid-Grinding
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME AD00-163
No Clean Solder Paste Benchmarking From A Materials Suppliers Viewpoint
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME PE00-232
Rapidelectrodes - Rapid Manufacture Of Edm-Electrodes Using Selective Laser Sintering
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-221
Progressive Tool Wear Monitoring In Milling Operations Based On Frequency Analysis Of Acoustic Emission Root Mean Square
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MS00-227
Using Cimosa And Free-Choice Petri Nets For Modeling And Verification Of Manufacturing Enterprise Business Processes
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-189:2000
Characterization Of Friction In Machining: Evaluation Of Asperity Deformation And Seizure-Based Models
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR00-209
The Application Of Cm-Ecm Technology To Metal Surface Finishing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR00-215
Vitrification Heat Treatment And The Dissolution Of Quartz
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-184
Skin Pass Wire Drawing Of Stainless Steel With Chlorine-Free Lubricant With The Aid Of Ultrasonic Vibration
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-204
An Investigation Of Tool Wear And Surface Quality In Hard Turning
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MM00-150
Office Lead Time Reduction Efforts - An Implementation Case Study
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME EE00-145:2000
Optimizing Test Probe Contact For No-Clean Electronic Assemblies
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MF00-117
Understanding And Optimizing Flow Uniformity In Propeller And Impeller Agitated Quench Tanks
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-225
A Pattern Recognition Approach For Facility Compaction And Selection Of Flexible Automation
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MS00-230:2000
Auto-Tuning Adaptive Supervisory Control Of Single-Plane Active Balancing Systems
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
€19.00
-
SME MR00-202:2000
An Analytical Model For Prediction Of Chatter Stability In Boring
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MM00-149
Development And Application Of Time Based Manufacturing System In The Uk
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MR00-188:2000
Material Behavior Of Aluminum 7075 And Aisi 1045 Steel In High Speed Machining
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS00-143
Development Of An Autonomous All-Terrain Vision Research Platform
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-236:2000
New Developments In Deep Ultraviolet Laser Metrology For Photolighography
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-226
Agility Within A Manufacturing Industry - A Case Study At Abb Robotics
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
€19.00
-
SME MM00-153
What Kind Of "Numbers" Can A Company Expect After Implementing Quick Response Manufacturing? Emperical Data From Several Projects On Lead Time Reduction
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME AD00-239
Mechanical Surface Preparations And Their Effects On The Formation Of Porosity In Gma Welds In Aluminum
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-120:2000
How To Reduce Cycle Time In Gear Design And Manufacturing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MF00-181
Prediction Of Ductile Fracture In Forward Extrusion With Spherical Dies
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME EE00-146:2000
Strategies For Creating Compliant Ic Packages At Near Chip Size
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-111
Determination Of The Capable Torque And The Axial Force For A Twist Drill Using Finite Element Method
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-190:2000
Comparison Of Sialon And Silicon Carbide Whisker Reinforced Alumina Ceramic For High-Speed Milling Of Inconel 718
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-222
Reduction In Number Of Data Collected For Reverse Engineering Of Free-Form Surfaces
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME CM00-112
Ferritic Nitrocarburizing Gears To Increase Wear Resistance And Reduce Distortion
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MM00-157
Culture Shock! The Impact Of Organizational Culture On Qrm Implementation
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS00-216
Decision Making In A Multi-Constraint Agent-Based Process Planning System
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MR00-198:2000
Tool-Workpiece Interface In Orthogonal Cutting - Application Of Fem Modeling
11/1/2000 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
€19.00
-
€19.00
-
€19.00
-
SME FC00-133
Application Of Ecm Technology In Automotive Related Parts Surface Finishing
11/1/2000 - PDF - English - SME
Learn More€19.00 -
SME MS99-177:1999
Study For Optimum Fixture Design Considering Flatness Error Due To Moving Cutting Heat Source
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
SME AD99-275
Multi-Tasking And The Emergence Of The Adhesive Dispensing Work-Cell Concept
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
€19.00
-
€19.00
-
€19.00
-
SME MR99-233
Application Of Pcbn Materials In The Machining Of Welded Hard-Facings
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MR99-257
Path To Productivity In Broaching: Converging Technologies Update
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME AD99-265
Meter, Mix, And Dispense Tools For Adhesives And Sealants
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR99-248
Influence Of Dressing Parameters On The Wheel Topography And Work Result In Grinding At Very Low Speeds And Changing Working Direction
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MS99-191:1999
Development Of A Cam System Based On Boundary-Map Data Structure
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MS99-179:1999
Approximating Geometric Designs With Simple Material Removal Processes And Cad/Cam Tools
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME CM99-115:1999
New Frontiers In Mold Construction: High Conductivity Materials & Conformal Cooling Channels
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS99-185:1999
Autonomous Measurement Of Physical Model Shape For Reverse Engineering
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-229
An Innovative System For Testing The Uniformity Of Grinding Wheel Action Through High-Speed Acoustic Emission Analysis
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR99-140:1999
Full-Field Temperature And Three-Dimensional Displacement Measurements In Hostile Environments
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MS99-174:1999
An Agent-Based Mechanism For Manufacturability Evaluation In The Product Realization Process
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
€19.00
-
€19.00
-
SME MS99-181:1999
Process Capability To Guide Tolerancing In Manufacturing Systems
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-259
Machinability Assessment And Surface Integrity Characteristics Of Austempered Ductile Iron (Adi) Using Ultra-Hard Cutting Tools
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-273
The Quantification Of The Depth Of Deformed Layer Using Elemental Analysis For Aspheric Lens Mold Core
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-243
Effects Of Mounting Elements Of Surface Grinding Machines Upon Their Various Vibrations
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-227
Contribution To The Role Of Coolants On Grinding Process And Work Results
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-135:1999
Test Method For Identification Of Optimal Cutting Conditions In Turning
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME MR99-234
Simulation Of Grinding By Means Of The Finite Element Analysis
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-164:1999
Three-Dimensional Modeling Of Gas Metal Arc Welding Process
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-251
The Cutting Tool Performance Depends On The Tool Grinding Process
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
€19.00
-
SME AD99-280
Adhesive Technologies For The Assembly Of Hard-To-Bond Plastics
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-284
Machining Of Complex Contours By Ultrasonic Assisted Grinding
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
-
SME MR99-162:1999
Analysis And Optimization Of Drill Cross-Sectional Geometry
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME MR99-250
Managing Technology For World Class Grinding Operations For The 21st Century
11/1/1999 - PDF - English - SME
Learn More€19.00 -
SME CM99-270:1999
Monitoring Hardening Processes On Gear Components Using Eddy Current And The Preventive Multi-Frequency
11/1/1999 - PDF - English - SME
Learn More€19.00 -
€19.00
