SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE AIR 1869D:2022-05-04
Wide-Body and Standard-Body Aircraft Lower Deck Cargo Compartment ULD Capacities (Stabilized: May 2022)
5/4/2022 - PDF - English - SAE
Learn More€165.00 -
SAE AIR 5378A:2022-05-04
Aircraft Tube Bending Methods, Techniques and Tooling (Stabilized: May 2022)
5/4/2022 - PDF - English - SAE
Learn More€137.00 -
SAE ARP 1987/4A:2022-05-04
Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of (Stabilized: May 2022)
5/4/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AS 1003K:2022-05-04
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS
5/4/2022 - PDF - English - SAE
Learn More€66.00 -
€54.00
-
€47.00
-
€87.00
-
€87.00
-
€47.00
-
€89.00
-
SAE AMS 4312E:2022-05-02
Aluminum Alloy, Rolled or Forged Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T651, 6061-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
5/2/2022 - PDF - English - SAE
Learn More€66.00 -
€54.00
-
€47.00
-
SAE AS 85421/1A:2022-05-02
FITTING END, STANDARD DIMENSIONS FOR DYNAMIC BEAM SEAL, MALE
5/2/2022 - PDF - English - SAE
Learn More€54.00 -
€113.00
-
€139.00
-
€111.00
-
SAE J 3266:2022-05-02
Automotive Air-Conditioning Service Ports Final Report, Recommendations
5/2/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 4027P:2022-04-29
Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061, -T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
4/29/2022 - PDF - English - SAE
Learn More€87.00 -
SAE AMS 4066D:2022-04-29
Aluminum Alloy, Drawn, Round Seamless Tubing 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti - (2219-T8511) Solution Heat Treated, Stress Relieved by Stretching and Precipitation Heat Treated
4/29/2022 - PDF - English - SAE
Learn More€60.00 -
SAE ARP 5627A:2022-04-29
Flammability Test Method for Aircraft Comfort Blankets (Stabilized: Apr 2022)
4/29/2022 - PDF - English - SAE
Learn More€101.00 -
SAE J 860:2022-04-27
Test Method for Measuring Mass (Weight) of Organic Trim Materials
4/27/2022 - PDF - English - SAE
Learn More€39.00 -
SAE J 883:2022-04-27
Test Method for Determining Dimensional Stability of Automotive Textile Materials
4/27/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 1389:2022-04-25
Sealing Compound, Polythioether Rubber, Light-Cured, for Integral Fuel Tanks and General Purpose, Intermittent use to 360 °F (182 °C)
4/25/2022 - PDF - English - SAE
Learn More€103.00 -
SAE AMS 4354A:2022-04-25
Aluminum Alloy, Plate, 7.9Zn – 1.8Cu - 2.0Mg - 0.10Zr (7099-T7451) Solution Heat Treated, Stress Relieved, and Overaged
4/25/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AS 150801E:2022-04-25
STUD, STEPPED. 1.5 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A
4/25/2022 - PDF - English - SAE
Learn More€47.00 -
SAE J 1281:2022-04-25
Operator Sound Pressure Level Exposure Measurement Procedure for Powered Recreational Craft
4/25/2022 - PDF - English - SAE
Learn More€70.00 -
€98.00
-
€79.00
-
SAE J 3161/1A:2022-04-25
Vehicle Level Validation Test Procedures for V2V Safety Communications
4/25/2022 - PDF - English - SAE
Learn More€147.00 -
SAE J 3161:2022-04-25
LTE Vehicle-to-Everything (LTE-V2X) Deployment Profiles and Radio Parameters for Single Radio Channel Multi-Service Coexistence
4/25/2022 - PDF - English - SAE
Learn More€135.00 -
SAE J 861:2022-04-25
Method of Testing Resistance to Crocking of Organic Trim Materials
4/25/2022 - PDF - English - SAE
Learn More€60.00 -
€103.00
-
SAE AMS 4088L:2022-04-22
Aluminum Alloy, Drawn, Seamless Tubing 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked
4/22/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 4353A:2022-04-22
Aluminum Alloy, Extruded Round Rod 3.5Cu - 1.0Li - 0.40Mg - 0.45Ag - 0.12Zr (2050-T84) Solution Heat Treated, Stress Relieved by Stretching, and Artificially Aged
4/22/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 7015:2022-04-22
Titanium 6-Aluminum 4-Vanadium Powder for Additive Manufacturing
4/22/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AS 3237E:2022-04-22
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .2500-28 UNJF-3A
4/22/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 5498B:2022-04-22
Minimum Operational Performance Specification for Inflight Icing Detection Systems
4/22/2022 - PDF - English - SAE
Learn More€168.00 -
€168.00
-
SAE AS 9821B:2022-04-22
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, CRES (UNS S17400), .5000-20 UNJF-3A
4/22/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AIR 4845A:2022-04-14
The FMECA Process in the Concurrent Engineering (CE) Environment (Stabilized: Apr 2022)
4/14/2022 - PDF - English - SAE
Learn More€142.00 -
€96.00
-
€60.00
-
SAE AMS 5842H:2022-04-14
Cobalt-Nickel Alloy, Corrosion- and Heat-Resistant, Bars 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb (Nb) - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
4/14/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5889D:2022-04-14
Nickel Alloy, Corrosion and Heat Resistant, Sheet and Strip 54Ni - 22Cr - 12.5Co - 9.0Mo - 1.2Al Consumable Electrode or Vacuum Induction Melted Annealed
4/14/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 6330K:2022-04-14
Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.65Cr - 1.25Ni (0.33 - 0.38C)
4/14/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AS 5553D:2022-04-14
Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts, Avoidance, Detection, Mitigation, and Disposition
4/14/2022 - PDF - English - SAE
Learn More€101.00 -
SAE AS 9505C:2022-04-14
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK, CRES, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
4/14/2022 - PDF - English - SAE
Learn More€47.00 -
SAE J 211/2:2022-04-14
Instrumentation for Impact Test—Part 2: Photographic Instrumentation
4/14/2022 - PDF - English - SAE
Learn More€87.00 -
€118.00
-
€79.00
-
SAE AMS 4916M:2022-04-13
Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed (Stabilized: Apr 2022)
4/13/2022 - PDF - English - SAE
Learn More€79.00 -
€66.00
-
SAE AMS 5894E:2022-04-13
Cobalt Alloys, Bars, Sheet, and Plate 60Co - 28Cr - 4.5W - 1.15C Solution Heat Treated
4/13/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 6435H:2022-04-13
Steel, Sheet, Strip, and Plate, 0.75Mn - 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod), Vacuum Consumable Electrode Melted, Annealed
4/13/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AS 9501D:2022-04-13
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, FULL SHANK CRES, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
4/13/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 7017:2022-04-07
Titanium 6 - Aluminum 4 - Vanadium Powder for Additive Manufacturing, Extra Low Interstitial (ELI)
4/7/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5923A:2022-04-06
Steel, Corrosion-Resistant, Bars, Wire, and Forgings and Forging Stock 17Cr - 0.52Mo (0.95 - 1.20C) (440C) for Bearing Applications
4/6/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5597H:2022-04-05
Nickel Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode or Vacuum Induction Melted 1950 °F (1066 °C) Solution Heat Treated
4/5/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AS 39029/1E:2022-04-05
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS81714 TERMINAL JUNCTION SYSTEM)
4/5/2022 - PDF - English - SAE
Learn More€60.00 -
€93.00
-
SAE AS 23053/11B:2022-04-01
INSULATION SLEEVING, ELECTRICAL, HEAT-SHRINKABLE FLUORINATED ETHYLENE PROPYLENE, NON-CROSSLINKED
4/1/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9716C:2022-04-01
BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, SILVER PLATED, NICKEL ALLOY (UNS N07001), .3125-24 UNJF-3A
4/1/2022 - PDF - English - SAE
Learn More€47.00 -
SAE J 2947:2022-04-01
Categorization and Properties of Steel Sheet for Automotive Cold Forming Applications
4/1/2022 - PDF - English - SAE
Learn More€109.00 -
SAE J 1014:2022-03-31
Classification and Nomenclature Towing Winch for Skidders and Crawler Tractors
3/31/2022 - PDF - English - SAE
Learn More€47.00 -
€131.00
-
SAE AIR 6411:2022-03-29
Effects of Extremely Cold Temperature on Landing Gear Operation
3/29/2022 - PDF - English - SAE
Learn More€109.00 -
SAE AIR 6418:2022-03-29
Transient Measurement Method Development for Aircraft Propulsion Engine and Auxiliary Power Unit Generated Contaminants in Bleed Air
3/29/2022 - PDF - English - SAE
Learn More€113.00 -
SAE AMS 2451/4E:2022-03-29
Plating, Brush, Cadmium Corrosion Protective, Low Hydrogen Embrittlement
3/29/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3742:2022-03-29
Elastomer: Rubber, Silicone (MQ/VMQ/PVMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity 50 – 60 Durometer Type A Hardness for Products in Pressurized Aircraft Compartment Interiors
3/29/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 4479A:2022-03-29
Aluminum Alloy, Extruded Profiles (2824-T3511), 4.0Cu - 1.35Mg - 0.7Mn, Solution Heat Treated and Stress Relieved by Stretching
3/29/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 7031:2022-03-29
Batch Processing Requirements for the Reuse of Used Powder in Additive Manufacturing of Aerospace Parts
3/29/2022 - PDF - English - SAE
Learn More€128.00 -
SAE AS 3144B:2022-03-29
STUD, STEPPED, 2.5 DIA ENGAGEMENT, PD SHANK, AMS5731, .5625-18 UNJF-3A X .500-20 UNJF-3A
3/29/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 5756/2B:2022-03-29
CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, OZONE RESISTANT (Stabilized: Mar 2022)
3/29/2022 - PDF - English - SAE
Learn More€47.00 -
€75.00
-
SAE AIR 5670A:2022-03-21
Issues in Stairway Design Aboard Transport Category Airplanes
3/21/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 5901D:2022-03-21
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 8Ni (SAE 30301) Solution Heat Treated
3/21/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 7006:2022-03-21
Nickel Alloy, Corrosion- and Heat-Resistant, Powder for Additive Manufacturing 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe
3/21/2022 - PDF - English - SAE
Learn More€75.00 -
€79.00
-
SAE J 3161/1:2022-03-21
On-Board System Requirements for LTE-V2X V2V Safety Communications
3/21/2022 - PDF - English - SAE
Learn More€138.00 -
SAE ARP 4102/1A:2022-03-17
On-Board Weight and Balance System (Stabilized: Mar 2022)
3/17/2022 - PDF - English - SAE
Learn More€54.00 -
SAE ARP 7212:2022-03-17
Recommended Design and Test Requirements for Hydraulic Flow Regulators
3/17/2022 - PDF - English - SAE
Learn More€119.00 -
SAE J 2810:2022-03-17
HFC-134a (R-134a) Refrigerant Recovery Equipment for Mobile Automotive Air-Conditioning Systems
3/17/2022 - PDF - English - SAE
Learn More€79.00 -
€86.00
-
€54.00
-
SAE AS 6512B:2022-03-16
Unmanned Systems (UxS) Control Segment (UCS) Architecture: Architecture Description
3/16/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AS 6513B:2022-03-16
Unmanned Systems (UxS) Control Segment (UCS) Architecture: Conformance Specification
3/16/2022 - PDF - English - SAE
Learn More€101.00 -
SAE AS 7478F:2022-03-16
Bolts and Screws, Steel, UNS S66286 Classification: 130 ksi/1200 °F 1800 °F Solution Heat Treated, Aged After Roll Threaded Procurement Specification for
3/16/2022 - PDF - English - SAE
Learn More€107.00 -
SAE AS 9588C:2022-03-16
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .5000-20 UNJF-3A
3/16/2022 - PDF - English - SAE
Learn More€39.00 -
€54.00
-
SAE MA 3447A:2022-03-16
BOLT, MACHINE - SPLINE DRIVE HD CLOSE TOL FULL SHANK, AMS5662, METRIC
3/16/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 22759/84E:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/87E:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 22759/88E:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 22759/92D:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 °C, 600 BOLTS, ROHS
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/93B:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/95B:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 200 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/96B:2022-03-15
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE MA 3449A:2022-03-15
BOLT, SPLINE DRIVE EXTENDED WASHER HEAD, REDUCED HEAD, RETAINER LOCKED, PD SHANK, AMS5708, METRIC
3/15/2022 - PDF - English - SAE
Learn More€54.00 -
SAE/USCAR-1-3:2022-03-15
SALT SPRAY TESTING AND EVALUATION OF FASTENER FINISHES (Stabilized: Mar 2022)
3/15/2022 - PDF - English - SAE
Learn More€70.00 -
SAE/USCAR-14-3:2022-03-15
SPECIFICATION FOR TESTING AUTOMOTIVE HALOGEN LIGHT SOURCES (Stabilized: Mar 2022)
3/15/2022 - PDF - English - SAE
Learn More€128.00 -
SAE/USCAR-20-2:2022-03-15
FIELD CORRELATED LIFE TEST SUPPLEMENT TO SAE/USCAR-2 (Stabilized: Mar 2022)
3/15/2022 - PDF - English - SAE
Learn More€98.00 -
SAE/USCAR-29-1:2022-03-15
AUTOMOTIVE GRADE COAXIAL CABLE PERFORMANCE SPECIFICATION (Stabilized: Mar 2022)
3/15/2022 - PDF - English - SAE
Learn More€98.00 -
SAE/USCAR-3-4:2022-03-15
SPECIFICATION FOR TESTING AUTOMOTIVE MINIATURE BULBS (Stabilized: Mar 2022)
3/15/2022 - PDF - English - SAE
Learn More€138.00 -
SAE AS 22759/80D:2022-03-11
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
3/11/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/81D:2022-03-11
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
3/11/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 22759/82D:2022-03-11
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
3/11/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 22759/83E:2022-03-11
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLT, ROHS
3/11/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/85E:2022-03-11
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, TIN COATED COPPER CONDUCTOR, 150 °C, 600 VOLT, ROHS
3/11/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/86E:2022-03-10
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLT, ROHS
3/10/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 22759/89E:2022-03-10
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 200 °C, 600 VOLTS ROHS
3/10/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/90D:2022-03-10
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER, ALLOY, 260 °C, 600 VOLTS ROHS
3/10/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/91D:2022-03-10
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 °C, 600 VOLT, ROHS
3/10/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 22759/94B:2022-03-10
WIRE, ELECTRICAL, POLYTETRAFLUOROETHYLENE/POLYMIDE INSULATED, LIGHTWEIGHT, NICKEL COATED, EXTRA HIGH STRENGTH COPPER ALLOY, 260 °C, 600 VOLT, ROHS
3/10/2022 - PDF - English - SAE
Learn More€54.00 -
€87.00
-
SAE AMS 5647M:2022-03-09
Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Forging Stock 19Cr - 9.5Ni Solution Heat Treated
3/9/2022 - PDF - English - SAE
Learn More€87.00 -
SAE AMS 6431R:2022-03-09
Steel, Bars, Forgings, Mechanical Tubing, and Forging Stock 1.05Cr - 0.55Ni - 1.0Mo - 0.11V (0.45 - 0.50C) (D6AC) Vacuum Consumable Electrode Remelted
3/9/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 7270M:2022-03-09
Rubber: Acrylonitrile-Butadiene (NBR) Fuel Resistant 65 to 75 Type A Hardness for Seals in Fuel
3/9/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AS 9698D:2022-03-09
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), 165 KSI MIN, .3125-24 UNJF-3A
3/9/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AGS 4677-4:2022-03-02
AGS4677 INSERT, SCREW THREAD, METRIC, SCREW LOCKING, HELICAL COIL, CORROSION RESISTANT STEEL DTD734, CADMIUM PLATED
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AGS 4677AR-4:2022-03-02
AGS4677AR Amendment Record for Drawing Standard No. AGS4677
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AMS 6526J:2022-03-02
Steel, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 1.0Cr - 7.5Ni - 4.5Co - 1.0Mo - 0.09V (0.29 - 0.34C) Consumable Electrode Vacuum Remelted, Annealed
3/2/2022 - PDF - English - SAE
Learn More€83.00 -
SAE ARP 7042:2022-03-02
Recommended Practice: Development Planning for Design of Additive Manufactured Components in an Aircraft System
3/2/2022 - PDF - English - SAE
Learn More€66.00 -
SAE ARP 8463:2022-03-02
Methods for Determining the Effect of Liquid Disinfectants on Seats in Transport Aircraft
3/2/2022 - PDF - English - SAE
Learn More€114.00 -
SAE AS 3404B:2022-03-02
BOLT, MACHINE - HEXAGON HEAD, DRILLED 6 HOLES, PD SHANK, AMS5708 (UNS N07001), .1900-32 UNJF-3A
3/2/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 63450-2:2022-03-02
AS63450-459 NUT, SELF-LOCKING, EXTENDED WASHER, DOUBLE HEXAGON
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 63450AR-2:2022-03-02
AS63450-459AR Amendment Record for Technical Specification No. AS63450-459
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 64379-2:2022-03-02
AS64379-380 NUT, SELF LOCKING, EXTENDED WASHER, DOUBLE HEXAGON - FOR USE WITH IMPEDANCE TYPE BOLTS
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AS 64379AR-2:2022-03-02
AS64379-380AR Amendment Record for Technical Specification No. AS64379-380
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE J 3131:2022-03-02
Definitions for Terms Related to Automated Driving Systems Reference Architecture
3/2/2022 - PDF - English - SAE
Learn More€103.00 -
SAE RS 751-2:2022-03-02
RS751 USER GUIDE FOR SAE ITC MANUFACTURING ROUTE (FLOW CHART)
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
€168.00
-
SAE TS 21AR-12:2022-03-02
TS21AR Amendment Record for Technical Specification No. TS21
3/2/2022 - PDF - English - SAE
Learn More€100.00 -
SAE/USCAR-27-1:2022-03-02
SPECIFICATION FOR TESTING GAS DISCHARGE LIGHT SOURCE SUBSYSTEM (Stabilized: Mar 2022)
3/2/2022 - PDF - English - SAE
Learn More€143.00 -
SAE AMS 3197N:2022-03-01
Sponge, Chloroprene (CR) Rubber, Soft (Stabilized: Mar 2022)
3/1/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5513L:2022-03-01
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.2Ni (SAE 30304) Solution Heat Treated
3/1/2022 - PDF - English - SAE
Learn More€87.00 -
SAE AS 6194A:2022-03-01
FLARING ASSEMBLY, TEE, AXIALLY SWAGED, FEMALE FLARELESS ON THE RUN, AXIALLY SWAGED ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
3/1/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 7455C:2022-03-01
Bolts and Screws, Steel, Low Alloy, Heat Resistant Hardened and Tempered, Roll Threaded
3/1/2022 - PDF - English - SAE
Learn More€105.00 -
SAE AS 9587C:2022-03-01
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .4375-20 UNJF-3A
3/1/2022 - PDF - English - SAE
Learn More€47.00 -
€131.00
-
€133.00
-
SAE AMS 1775C:2022-02-23
Fabric, Nylon Upholstery Fire Resistant (Stabilized: Feb 2022)
2/23/2022 - PDF - English - SAE
Learn More€83.00 -
€66.00
-
SAE AMS 6514K:2022-02-23
Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings and Forging Stock 18.5Ni - 9.0Co - 4.9Mo - 0.65Ti - 0.10Al Consumable Electrode Vacuum Melted, Annealed
2/23/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 6525F:2022-02-23
Steel, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forgings and Rings 0.75Cr - 9.0Ni - 4.5Co - 1.0Mo - 0.09V (0.17 - 0.23C) Consumable Electrode Vacuum Melted, Annealed
2/23/2022 - PDF - English - SAE
Learn More€86.00 -
SAE AS 3413C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, UNS N07718, 185 KSI, .1900-32 UNJF-3A (STRESS RUPTURE RESISTANT)
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3414C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, PD SHANK UNS N07718, 185 KSI, .2500-28 UNJF-3A (STRESS RUPTURE RESISTANT)
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9584C:2022-02-23
BOLT, MACHINE - HEXAGON HEAD, DRILLED, 6 HOLES, FULL SHANK, UNS S66286, 130 KSI MIN, .2500-28 UNJF-3A
2/23/2022 - PDF - English - SAE
Learn More€47.00 -
€103.00
-
€98.00
-
€93.00
-
SAE J 1965:2022-02-18
Road Vehicles - Wheels for Commercial Vehicles and Multipurpose Passenger Vehicles - Fixing Nuts - Test Methods
2/18/2022 - PDF - English - SAE
Learn More€75.00 -
€437.00
-
SAE AMS 4787H:2022-02-17
Gold-Nickel Alloy, Brazing Filler Metal, High Temperature 82Au - 18Ni 1740 °F (949 °C) Solidus-Liquidus Temperature
2/17/2022 - PDF - English - SAE
Learn More€66.00 -
€47.00
-
SAE J 1637:2022-02-17
Laboratory Measurement of the Composite Vibration Damping Properties of Materials on a Supporting Steel Bar
2/17/2022 - PDF - English - SAE
Learn More€96.00 -
SAE J 3078/3:2022-02-17
Off-Road Self-Propelled Work Machines Operator Enclosure Environment Part 3: Operator Enclosure Pressurization System Test Procedure
2/17/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 2490:2022-02-16
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process Thin Film
2/16/2022 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 4979K:2022-05-16
Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Solution and Precipitation Heat Treated
2/16/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AS 121501C:2022-02-16
NUT, PLAIN - HEXAGON, STEEL UNS G87400, CADMIUM PLATED, 125 KSI MIN
2/16/2022 - PDF - English - SAE
Learn More€47.00 -
€60.00
-
€89.00
-
SAE J 4002:2022-02-16
H-Point Machine (HPM-II) Specifications and Procedure for H-Point Determination - Auditing Vehicle Seats
2/16/2022 - PDF - English - SAE
Learn More€141.00 -
SAE AMS 4356A:2022-02-15
Aluminum Alloy Seamless Drawn Round Tubing 2.3 Cu – 8.0 Zn – 2.0 Mg - 0.16 Zr (7155-T76) Solution Heat Treated and Aged
2/15/2022 - PDF - English - SAE
Learn More€60.00 -
€128.00
-
SAE AMS 5400D:2022-02-14
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution and Precipitation Heat Treated (H935) 170 ksi (1172 MPa) Tensile Strength
2/14/2022 - PDF - English - SAE
Learn More€86.00 -
SAE ARP 1676A:2022-02-14
Recommended Formulae for Determining Drop Dimensions for Simple-Bend Tube Fittings with Flared and Flareless End Connections Used in Aerospace Applications (Stabilized: Feb 2022)
2/14/2022 - PDF - English - SAE
Learn More€54.00 -
SAE ARP 6199B:2022-02-14
Method to Evaluate Passenger and Flight Attendant Seats for the Test Requirements of 14 CFR Part 25 Appendix F, Parts IV and V
2/14/2022 - PDF - English - SAE
Learn More€135.00 -
€120.00
-
€100.00
-
SAE AGS 2105AR-7:2022-02-04
AGS2105AR Amendment Record for Drawing Standard No. AGS2105
2/4/2022 - PDF - English - SAE
Learn More€100.00 -
SAE TS 23-10:2022-02-04
TS23 MANUFACTURING SPECIFICATION FOR BOLTS (UNIFIED THREADS)
2/4/2022 - PDF - English - SAE
Learn More€168.00 -
SAE TS 23AR-10:2022-02-04
TS23AR Amendment Record for Technical Specification No. TS23
2/4/2022 - PDF - English - SAE
Learn More€100.00 -
€100.00
-
SAE TS 360AR-3:2022-02-04
TS360AR Amendment Record for Technical Specification No. TS360
2/4/2022 - PDF - English - SAE
Learn More€100.00 -
SAE AIR 5386A:2022-02-02
Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of (Stabilized: Feb 2022)
2/2/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 5387F:2022-02-02
Alloy, Corrosion and Heat Resistant, Investment Castings 60Co - 29Cr - 4.5W As Cast
2/2/2022 - PDF - English - SAE
Learn More€70.00 -
SAE ARP 5256A:2022-02-02
Mixing Resins, Adhesives and Potting Compounds (Stabilized: Feb 2022)
2/2/2022 - PDF - English - SAE
Learn More€96.00 -
€103.00
-
SAE AS 9928C:2022-02-02
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, CADMIUM PLATED, STEEL, UNS G87400, 125 KSI MIN, .5000-20 UNJF-3A
2/2/2022 - PDF - English - SAE
Learn More€47.00 -
SAE J 1670:2022-02-02
Type “F” Clamps for Plumbing Applications (Stabilized: Feb 2022)
2/2/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 4209D:2022-02-01
Aluminum Alloy Sheet, Alclad 6.0Cu - 0.40Zr - (2004-F) As Rolled
2/1/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AS 3309C:2022-02-01
BOLT, MACHINE - HEXAGON HEAD, PD SHANK, NICKEL ALLOY (UNS N07001), .3750-24 UNJF-3A
2/1/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 2471K:2022-01-28
Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating
1/28/2022 - PDF - English - SAE
Learn More€87.00 -
€60.00
-
SAE AMS 5575R:2022-01-28
Steel, Corrosion and Heat-Resistant, Welded Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
1/28/2022 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5645T:2022-01-28
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 10Ni - 0.40Ti (321) Solution Heat Treated
1/28/2022 - PDF - English - SAE
Learn More€87.00 -
SAE AMS 6481E:2022-01-28
Steel Bars, Forgings, Mechanical Tubing, and Forging Stock Nitriding 3Cr - 1Mo - 0.2V - (0.29 - 0.36C) Premium Aircraft-Quality for Bearing Applications Double Vacuum Melted
1/28/2022 - PDF - English - SAE
Learn More€79.00 -
SAE AS 39029/31D:2022-01-28
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-26482 SERIES 1, MIL-DTL-26500 AND MIL-DTL-26518 CONNECTORS)
1/28/2022 - PDF - English - SAE
Learn More€66.00 -
SAE AS 39029E:2022-01-28
Contacts, Electrical Connector, General Specification for
1/28/2022 - PDF - English - SAE
Learn More€154.00 -
SAE AS 9569:2022-01-28
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED PD SHANK, UNS S66286, .4375-20 UNJF-3A
1/28/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9805B:2022-01-28
BOLT, MACHINE-HEXAGON HEAD, PD SHANK, CORROSION RESISTANT STEEL (UNS S17400), .1900-32 UNJF-3A
1/28/2022 - PDF - English - SAE
Learn More€39.00 -
SAE J 3064:2022-01-28
Standard Specification for Allowable Defects in Rolled Goods for Interior Trim
1/28/2022 - PDF - English - SAE
Learn More€60.00 -
SAE AS 155001C:2022-01-27
STUD, STEPPED, 2 DIA ENGAGEMENT, CADMIUM PLATED, STEEL UNS G87400, .3125-18 UNS X .2500-28 UNF-3A (Stabilized: Jan 2022)
1/27/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 39029/101C:2022-01-27
CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-12883/44, MIL-DTL-12883/45, MIL-DTL-12883/46, AND MIL-DTL-12883/52 RELAY)
1/27/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 9528C:2022-01-27
SCREW, MACHINE STEEL UNS G87400, CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, .1640-36 UNJF-3A
1/27/2022 - PDF - English - SAE
Learn More€39.00 -
SAE AS 9529C:2022-01-27
BOLT, MACHINE - STEEL UNS G87400 CADMIUM PLATE, DRILLED, 1 HOLE HEXAGON HEAD, 1900-32 UNJF-3A
1/27/2022 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 5560P:2022-01-21
Steel, Corrosion Resistant, Seamless Tubing, 19Cr - 10Ni (304), Solution Heat Treated
1/21/2022 - PDF - English - SAE
Learn More€70.00 -
SAE AS 6158A:2022-01-21
FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
1/21/2022 - PDF - English - SAE
Learn More€54.00 -
SAE AS 6193A:2022-01-21
FITTING ASSEMBLY, ELBOW, 45°, AXIALLY SWAGED, FEMALE FLARELESS, HYDRAULIC, UP TO 1500 PSI
1/21/2022 - PDF - English - SAE
Learn More€47.00
