SAE ®

 

SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.

 

With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.

 

They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance.


Items 401 to 600 of 13487 total

Set Ascending Direction
per page

List  Grid 

  • SAE J 48:2023-10-06

    Guidelines for Liquid Level Indicators
    10/6/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AMS 3216J:2023-10-05

    Elastomer: Fluorocarbon (FKM) Rubber High-Temperature - Fluid Resistant Low Compression Set / 70 to 80 Type A Hardness For Products in Fuel Systems and Specific Engine Oil Systems
    10/5/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 4777K:2023-10-05

    Nickel Alloy, Brazing Filler Metal 82Ni - 4.5Si - 7.0Cr - 3.1B - 3.0Fe 1780 °F (971 °C) Solidus to 1830 °F (999 °C) Liquidus Range
    10/5/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5637K:2023-10-05

    Steel, Corrosion-Resistant, Bars and Wire 18Cr - 9.0Ni (302) Solution Heat Treated, Cold Drawn and Stress Relieved 125 ksi (862 MPa) Tensile Strength
    10/5/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE ARP 6912:2023-10-05

    Substantiation of Power Available and Inlet Distortion Compliance for Rotorcraft Engine Inlet Barrier Filter Installations
    10/5/2023 - PDF - English - SAE
    Learn More
    €149.00

  • SAE ARP 8462:2023-10-05

    Evaluation of Fouling Propensity of Aviation Lubricants Using the Mixed-Phase Flow Technique (High-Temperature Deposition Test)
    10/5/2023 - PDF - English - SAE
    Learn More
    €123.00

  • SAE J 1307:2023-10-05

    Excavator and Backhoe Hand Signals
    10/5/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE J 1400:2023-10-05

    Laboratory Measurement of the Airborne Sound Barrier Performance of Flat Materials and Assemblies
    10/5/2023 - PDF - English - SAE
    Learn More
    €114.00

  • SAE J 343:2023-10-05

    Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
    10/5/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 6270S:2023-10-02

    Steel, Bars, Forgings, and Mechanical Tubing and Forging Stock Aircraft Quality 0.50Cr - 0.55Ni - 0.20Mo (0.13 - 0.18C) (SAE 8615)
    10/2/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6945D:2023-10-02

    Titanium Alloy, Single Melt, Sheet, Strip, and Plate 6Al - 4V Annealed
    10/2/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE ARP 5824A:2023-10-02

    Recommended Solid Film Lubricants for Fluid System Components (Stabilized: Oct 2023)
    10/2/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE ARP 600C:2023-10-02

    Torque Determination, Method of, For Tube or Hose End Fitting Connections, Flared, Flareless, or Miscellaneous Screw Thread Style (Stabilized: Oct 2023)
    10/2/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE ARP 907A:2023-10-02

    Missile and Rocket Applications: Hose Assemblies, Flexible Metal, High Pressure and High Temperature (Stabilized: Oct 2023)
    10/2/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AS 91001D:2023-10-02

    NUT, HEXAGON, DRILLED, BOSS CONNECTION, CRES - UNS S30400 (Stabilized: Oct 2023)
    10/2/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE J 1730:2023-10-02

    ABS Exciter Ring Location Standardization
    10/2/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE J 2980:2023-10-02

    Considerations for ISO 26262 ASIL Hazard Classification
    10/2/2023 - PDF - English - SAE
    Learn More
    €144.00

  • SAE AMS 5837H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 62Ni - 21.5Cr - 9.0Mo - 3.7Cb (Nb) (625)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AIR 4096A:2023-09-28

    Rotorcraft Engine Foreign Object Debris and Damage
    9/28/2023 - PDF - English - SAE
    Learn More
    €98.00

  • SAE AMS 5654H:2023-09-28

    Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings and Forging Stock 18Cr - 11Ni - 0.60Cb (Nb) (347) Premium Aircraft Quality, Consumable Electrode Melted Solution Heat Treated
    9/28/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5670H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Rings, Forgings, and Heading 72Ni - 15.5Cr - 0.95Cb (Nb) - 2.5Ti - 0.70Al - 7.0Fe (X750) 1800 °F (982 °C) Solution Heat-Treated, Precipitation-Hardenable
    9/28/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5800H:2023-09-28

    Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted and Remelted (Rene 41)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 5801H:2023-09-28

    Cobalt Alloy, Corrosion- and Heat-Resistant, Welding Wire 39Co - 22Cr - 22Ni - 14.5W - 0.07La (188)
    9/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AS 23053/19:2023-09-28

    INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, MODIFIED FLUOROPOLYMER, CROSSLINKED, 200 °C
    9/28/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 6111:2023-09-28

    JAUS Unmanned Maritime Vehicle Service Set
    9/28/2023 - PDF - English - SAE
    Learn More
    €161.00

  • SAE J 1676:2023-09-28

    Guideline for Photo-Documentation of Exterior Vehicle Damage for 3D Analysis
    9/28/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE J 537:2023-09-28

    Storage Batteries
    9/28/2023 - PDF - English - SAE
    Learn More
    €98.00

  • SAE AMS 6272P:2023-09-22

    Steel Bars, Forgings, and Mechanical Tubing Aircraft-Quality 0.50Cr - 0.55Ni - 0.20Mo (0.15 - 0.20C) (SAE 8617)
    9/22/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6429K:2023-09-22

    Steel Bars, Forgings, Mechanical Tubing, Rings and Stock for Forgings and Rings 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.33 - 0.38C) (4335 Mod) Premium Aircraft Quality Consumable Electrode Vacuum Remelted
    9/22/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 4056J:2023-09-21

    Aluminum Alloy, Sheet and Plate 4.4Mg - 0.70Mn - 0.15Cr (5083-O) Annealed
    9/21/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4069G:2023-09-21

    Aluminum Alloy, Drawn, Round Seamless Tubing Close Tolerance 2.5Mg - 0.25Cr (5052-O) Annealed
    9/21/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AS 27648E:2023-09-21

    BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTERNAL SELF-ALIGNING, EXTRA LIGHT DUTY
    9/21/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE ARP 1172A:2023-09-18

    Filters, Conventional, Electromagnetic Interference Reduction General Specification For (Stabilized: Sep 2023)
    9/18/2023 - PDF - English - SAE
    Learn More
    €109.00

  • SAE ARP 1267A:2023-09-18

    Electromagnetic Interference Measurement Impulse Generators: Standard Calibration Requirements and Techniques (Stabilized: Sep 2023)
    9/18/2023 - PDF - English - SAE
    Learn More
    €107.00

  • SAE AS 6264A:2023-09-18

    CLAMP, LOOP, TUBE 17-7PH, CUSHION, SELF-LOCKING
    9/18/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE J 2396:2023-09-18

    Definitions and Experimental Measures Related to the Specification of Driver Visual Behavior Using Video-Based Techniques (Stabilized: Sep 2023)
    9/18/2023 - PDF - English - SAE
    Learn More
    €96.00

  • SAE ARP 4698A:2023-09-11

    Guide for Choosing a Minimum Wall Thickness of Tubing for Use with Weld Fittings Coded for a Range of Wall Sizes (Stabilized: Sep 2023)
    9/11/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE ARP 4919A:2023-09-11

    Fluid Connections, Fittings, Hex Width (Stabilized: Sep 2023)
    9/11/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE ARP 4961A:2023-09-11

    Weights, Tube Fitting, Estimating, Weighing and Maintaining, Procedure for (Stabilized: Sep 2023)
    9/11/2023 - PDF - English - SAE
    Learn More
    €113.00

  • SAE ARP 6002A:2023-09-11

    Marking, Standard Hose, Aircraft (Stabilized: Sep 2023)
    9/11/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AS 90347C:2023-09-11

    CABLE ASSEMBLY, EXTERNAL ELECTRIC POWER, AIRCRAFT 28 VOLT DC, OPERATING POWER (Stabilized: Sep 2023)
    9/11/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5737R:2023-09-07

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Stock for Forging and Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted 1650 °F (899 °C) Solution and Precipitation Heat Treated
    9/7/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AIR 1900B:2023-09-07

    Guide to Temperature Monitoring in Aircraft Gas Turbine Engines
    9/7/2023 - PDF - English - SAE
    Learn More
    €143.00

  • SAE AMS 4994B:2023-09-07

    Titanium Alloy Powdered Metal Products 6Al - 4V Hot Isostatically Pressed, Annealed
    9/7/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5773G:2023-09-07

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings or Rings 15Cr - 6.5Ni - 0.75Mo - 0.30Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated, Precipitation Hardenable
    9/7/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE AMS 6952A:2023-09-07

    Titanium Alloy, Forgings 5.8Al - 4.0Sn - 3.5Zr - 2.8Mo - 0.7Nb - 0.35Si - 0.06C Solution and Precipitation Heat Treated
    9/7/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE ARP 6328A:2023-09-07

    Guideline for Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts, Avoidance, Detection, Mitigation, and Disposition Systems
    9/7/2023 - PDF - English - SAE
    Learn More
    €128.00

  • SAE J 2727:2023-09-06

    Mobile Air Conditioning System Refrigerant Emissions Estimate for Mobile Air Conditioning Refrigerants
    9/6/2023 - PDF - English - SAE
    Learn More
    €173.00

  • SAE J 2847/2:2023-09-06

    Communication Between Plug-in Vehicles and Off-Board DC Chargers
    9/6/2023 - PDF - English - SAE
    Learn More
    €165.00

  • SAE J 2868:2023-09-06

    Pedestrian Dummy Full-Scale Test Results and Resource Materials
    9/6/2023 - PDF - English - SAE
    Learn More
    €139.00

  • SAE J 3187-1:2023-09-06

    System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry - Appendix: STPA and Human Machine Interactions (HMIs)
    9/6/2023 - PDF - English - SAE
    Learn More
    €113.00

  • SAE J 3187-2:2023-09-06

    System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry - Appendix: STPA and Safety of the Intended Functionality
    9/6/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE J 3187-3:2023-09-06

    System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry - Appendix: STPA and Model-Based Systems Engineering (MBSE)
    9/6/2023 - PDF - English - SAE
    Learn More
    €116.00

  • SAE AMS 5731M:2023-09-05

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, Mechanical Tubing, Rings, and Stock for Forgings, Rings, or Heading 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V (A286) Consumable Electrode Remelted, 1800 °F (982 °C) Solution Heat Treated Precipitation Hardenable
    9/5/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 5925C:2023-09-05

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock 15.5Cr - 1.8Mo - 0.20N (0.37 - 0.45C) Electroslag Remelted
    9/5/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AIR 7368:2023-09-05

    Cybersecurity for Propulsion Systems
    9/5/2023 - PDF - English - SAE
    Learn More
    €143.00

  • SAE AMS 2449B:2023-09-05

    Grinding of HVOF Sprayed Tungsten Carbide Coatings Applied to High Strength Steels
    9/5/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE AMS 4206D:2023-09-05

    Aluminum Alloy, Plate (7055-T7751) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
    9/5/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4342G:2023-09-05

    Aluminum Alloy, Extrusions 6.2Zn - 2.3Cu - 2.2Mg - 0.12Zr (7050-T74511) Solution Heat Treated, Stress Relieved, Straightened, and Overaged
    9/5/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 7100/1A:2023-09-05

    Fused Filament Fabrication Process- Stratasys Fortus 900mc Plus with Type 1, Class 1, Form 1, Grade 0, Natural Color Material for
    9/5/2023 - PDF - English - SAE
    Learn More
    €103.00

  • SAE AS 1251D:2023-09-05

    FITTING, UNION, FLARED TUBE, FOR SEAL RING
    9/5/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 2931/1:2023-09-05

    Digital Communications for Plug-in Electric Vehicles
    9/5/2023 - PDF - English - SAE
    Learn More
    €145.00

  • SAE AS 7928/11E:2023-09-05

    TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TIN WHISKER RESISTANT, TYPE I, CLASS I, FOR 150 °C TOTAL CONDUCTOR TEMPERATURE
    9/5/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE J 649:2023-09-01

    Automatic Transmission Functions—Terminology (Stabilized: Sep 2023)
    9/1/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE MA 2520A:2023-09-01

    NUT - HEX, BACK-UP RING, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC (Stabilized: Sep 2023)
    9/1/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE MA 2521A:2023-09-01

    NUT - HEX, PORT FITTING CONNECTOR, AMS5639, MJ THREAD, METRIC (Stabilized: Sep 2023)
    9/1/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE MA 2532A:2023-09-01

    ADAPTER - PORT TO TUBE, 60 DEG CONE COUPLING, AMS5639, MJ THREAD, METRIC (Stabilized: Sep 2023)
    9/1/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE MA 2515A:2023-09-01

    RING - BACK-UP, PORT CONNECTION, AMS2660, METRIC (Stabilized: Sep 2023)
    9/1/2023 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AS 21154C:2023-08-31

    BEARING, PLAIN, SELF-ALIGNING, GROOVED OUTER RING (Stabilized: Aug 2023)
    8/31/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AS 81934/1B:2023-08-31

    BEARING, SLEEVE, PLAIN, SELF-LUBRICATING, -65 °F TO 325 °F
    8/31/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE J 2836/2:2023-08-31

    Use Cases for Communication Between Plug-in Vehicles and Off-Board DC Charger
    8/31/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE AMS 4081K:2023-08-30

    Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T4) Solution Heat Treated and Naturally Aged
    8/30/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5082J:2023-08-30

    Steel Tubing, Seamless 0.31 - 0.38C (SAE 1035) Stress Relieved
    8/30/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 6428M:2023-08-30

    Steel, Bars, Forgings, Mechanical Tubing and Forging Stock Aircraft Quality 0.78Cr - 1.8Ni - 0.35Mo - 0.20V (0.32 - 0.38C) (4335 Mod)
    8/30/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS 6454G:2023-08-30

    Steel, Sheet, Strip, and Plate 1.8Ni - 0.80Cr - 0.25Mo (0.38 - 0.43C) (SAE 4340) Vacuum Consumable Electrode Remelted
    8/30/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE J 1375:2023-08-23

    Starter Motor Application Considerations (Stabilized: Aug 2023)
    8/23/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 2437:2023-08-23

    Air Starter Motor Test Procedure (Stabilized: Aug 2023)
    8/23/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE J 2438:2023-08-23

    Low-Temperature Cranking Load Requirements of an Engine—Air Starter Method (Stabilized: Aug 2023)
    8/23/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AMS 5635H:2023-08-22

    Steel, Corrosion-Resistant, Bars, Wire, Forgings and Forging Stock 18Cr - 9Ni - 0.21Pb (303Pb) Free-Machining, Solution Heat Treated
    8/22/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5703F:2023-08-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings and Stock for Forging 41.5Ni - 16Cr - 37Fe - 2.9Cb - 1.8Ti Consumable Electrode or Vacuum Induction Melted 1750 °F (954 °C) Solution, Stabilization, and Precipitation Heat Treated
    8/22/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE J 3086:2023-08-22

    Performance Classification of Headlamp Outer Lenses
    8/22/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 5578H:2023-08-21

    Steel, Corrosion- and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
    8/21/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 5631G:2023-08-21

    Steel, Corrosion-Resistant, Bars Forgings and Forging Stock 17Cr (0.60 - 0.75C) (440A)
    8/21/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5701G:2023-08-21

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Flash Welded Rings and Forging Stock 41.5Ni - 16Cr - 37Fe - 2.9Cb (Nb) - 1.8Ti Consumable Electrode Remelted or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated
    8/21/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE ARP 4967C:2023-08-21

    Night Vision Imaging Systems (NVIS) Integrally Illuminated Information Panels
    8/21/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 22520/38A:2023-08-21

    CRIMPING TOOL, TERMINAL, HAND ACTUATED, WIRE TERMINATION, TYPE II, FOR EXTERNAL POWER PLUG SOCKET CONTACTS AND LUG TERMINAL SIZES 22-10
    8/21/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AS 5449B:2023-08-21

    FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
    8/21/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE AS 681L:2023-08-21

    Gas Turbine Engine Performance Presentation for Computer Programs
    8/21/2023 - PDF - English - SAE
    Learn More
    €120.00

  • SAE AS 7512A:2023-08-21

    COUPLING COMPONENTS, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF CONDING, KIT OF PARTS
    8/21/2023 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AS 7514C:2023-08-21

    SLEEVE, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING
    8/21/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 7515C:2023-08-21

    COUPLING ASSEMBLY, THREADLESS, FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING
    8/21/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 9578A:2023-08-21

    BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, DRILLED, PD SHANK, UNS S66286, SILVER PLATED, .4375-20UNJF-3A
    8/21/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 2566:2023-08-21

    Personal Watercraft - Display of Capacity Information
    8/21/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AMS 3330D:2023-08-16

    Elastomer: Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45 - 55 Shore A Hardness For Products in Fuel Systems/Lubricating Oils
    8/16/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 4193E:2023-08-16

    Aluminum Alloy, Sheet, and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T861) Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
    8/16/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 4662C:2023-08-16

    FITTING, PLUG, SHORT FLARELESS
    8/16/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 5206B:2023-08-16

    NUT, FLARED, LONG
    8/16/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 5545A:2023-08-16

    NUT COUPLING, FLARELESS, EXTRA FINE THREAD, 5080 PSI
    8/16/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 1470:2023-08-16

    Measurement of Noise Emitted by Accelerating Highway Vehicles (Stabilized: Aug 2023)
    8/16/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE AMS 3379A:2023-08-14

    Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels (Stabilized: Aug 2023)
    8/14/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE AMS 4992D:2023-08-08

    Casting, Structural Investment, Titanium Alloy 6Al - 4V Hot Isostatically Pressed
    8/8/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 7911E:2023-08-08

    Aluminum Beryllium, Preforms Hot Isostatic Pressed and Heat Treated 38Al - 62Be
    8/8/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 27647G:2023-08-08

    BEARING, BALL, AIRFRAME ANTI-FRICTION, EXTRA WIDE DOUBLE ROW, INTERMEDIATE DUTY
    8/8/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE TAHB 0007_1A:2023-08-03

    Logistics Product Data Summaries Handbook
    8/3/2023 - PDF - English - SAE
    Learn More
    €171.00

  • SAE AIR 1419D:2023-08-01

    Inlet Total-Pressure Distortion Considerations for Gas-Turbine Engines
    8/1/2023 - PDF - English - SAE
    Learn More
    €165.00

  • SAE AMS 4070P:2023-08-01

    Aluminum Alloy, Drawn, Round Seamless Tubing 2.5Mg - 0.25Cr (5052-O) Annealed
    8/1/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4079J:2023-08-01

    Aluminum Alloy, Drawn, Round, Seamless, Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Close Tolerance, Annealed
    8/1/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 4080R:2023-08-01

    Aluminum Alloy, Drawn Seamless Tubing 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed
    8/1/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 4269B:2023-08-01

    Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T361) Solution Heat Treated and Cold Worked
    8/1/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4895:2023-08-01

    Titanium Alloy, Round Bars 5Al - 1Fe Annealed
    8/1/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 4941H:2023-08-01

    Titanium Tubing, Welded 40 ksi (276 MPa) Yield Strength
    8/1/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 6562:2023-08-01

    Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials
    8/1/2023 - PDF - English - SAE
    Learn More
    €118.00

  • SAE ARP 6178A:2023-08-01

    Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts: Tools for Risk Assessment of Other than an Authorized Source (e.g., Independent Distributors)
    8/1/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AS 3040B:2023-08-01

    INSTALLATION - MULTIPLE TUBE DETACHABLE CUSHION CLAMP (Stabilized: Aug 2023)
    8/1/2023 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AS 4283D:2023-08-01

    Handles and Attachments for Hand Socket Wrenches
    8/1/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AS 5782C:2023-08-01

    Retainers (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, for Use in AS4716 Glands
    8/1/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE AS 7232C:2023-08-01

    Rivets, Solid and Tubular, Nickel Alloy Corrosion- and Heat-Resistant 74Ni - 15.5Cr - 8.0Fe Procurement Specification for
    8/1/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AS 7477J:2023-08-01

    Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification
    8/1/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE AS 83519/1B:2023-08-01

    SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT FOR CABLES HAVING TIN OR SILVER PLATED SHIELDS (CLASS I)
    8/1/2023 - PDF - English - SAE
    Learn More
    €39.00

  • SAE AS 9553C:2023-08-01

    NUT - HEXAGON, BOSS CONNECTION, CRES - UNS S30400, 75 KSI (Stabilized: Aug 2023)
    8/1/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE GEIA-STD 0005_1B:2023-08-01

    Standard for Developing a Lead-Free Control Plan to Manage the Risks of Lead-Free Solders and Finishes in Aerospace, Defense, and High-Performance Soldered Electronic Products
    8/1/2023 - PDF - English - SAE
    Learn More
    €139.00

  • SAE J 2907:2023-08-01

    Performance Characterization of Electrified Powertrain Motor-Drive Subsystem (Stabilized: Aug 2023)
    8/1/2023 - PDF - English - SAE
    Learn More
    €118.00

  • SAE J 2945/7:2023-08-01

    High-Precision Positioning for V2X Systems
    8/1/2023 - PDF - English - SAE
    Learn More
    €124.00

  • SAE J 643:2023-08-01

    Hydrodynamic Drive Test Code (Stabilized: Aug 2023)
    8/1/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE MA 2093A:2023-08-01

    Fitting End, Dimensions, Fluid Systems Port Connection, Metric (Stabilized: Aug 2023)
    8/1/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE J 2461:2023-07-31

    Vehicle Electronic Programming Stations (VEPS) System Specification for Win32®
    7/31/2023 - PDF - English - SAE
    Learn More
    €93.00

  • SAE AMS 4900S:2023-07-24

    Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 55 ksi (379 MPa) Yield Strength
    7/24/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 6411K:2023-07-24

    Steel Bars, Forgings, Mechanical Tubing and Forging Stock 0.88Cr - 1.8Ni - 0.42Mo - 0.08V (0.28 - 0.33C) (4330 Mod) Consumable Electrode Remelted
    7/24/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AMS 6562/1:2023-07-24

    Medium Temperature, Out-of-Autoclave, Oven-Vacuum-Bag Cure Epoxy Resin Impregnated Fiber Reinforced Composite Materials, Type 35, Class 4, Grade 293, Style 7781
    7/24/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE ARP 5660B:2023-07-24

    Deicing Facility Operational Procedures
    7/24/2023 - PDF - English - SAE
    Learn More
    €136.00

  • SAE AS 21936A:2023-07-24

    CONTOUR AND MOUNTING END, CLUSTER FITTING BODY, SEMIFINISHED, DESIGN STANDARD
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 21938C:2023-07-24

    BOLT, CLUSTER FITTING, SINGLE PORT FLARELESS
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 21944C:2023-07-24

    BODY, CLUSTER FITTING, TWO WAY, 180°, FLARELESS
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 22759/34B:2023-07-24

    WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, TIN-COATED, COPPER, 150 °C, 600 VOLT, ROHS
    7/24/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 22759/43B:2023-07-24

    WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, CROSSLINKED MODIFIED ETFE, NORMAL WEIGHT, SILVER-COATED, COPPER, 200 °C, 600 VOLT, ROHS
    7/24/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 58091B:2023-07-24

    Circuit Breakers, Trip Free, Aircraft, General Specification for
    7/24/2023 - PDF - English - SAE
    Learn More
    €133.00

  • SAE AS 81714/12D:2023-07-24

    TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, DOUBLE, SERIES I
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85049/135A:2023-07-24

    CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, STRAIGHT, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND AS5590/1 CONNECTORS
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85049/136A:2023-07-24

    CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, 45 DEGREES, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND AS5590/1 CONNECTORS
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 85049/137A:2023-07-24

    CONNECTOR ACCESSORIES, FIBER OPTIC BACKSHELL, SPLIT, 90 DEGREES, SELF-LOCKING CATEGORY 3B FOR MIL-DTL-38999 SERIES III AND AS5590/1 CONNECTORS
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 9733C:2023-07-24

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES UNS S17400, .2500-28 UNJF-3A
    7/24/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 3010:2023-07-24

    Registration and Conformity Assessment Process for Passenger Cars and Light Trucks Wheels (Stabilized: Jul 2023)
    7/24/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE J 1052:2023-07-19

    Motor Vehicle Driver and Passenger Head Position
    7/19/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE J 3008:2023-07-19

    Sealed Trailer Tow Connector
    7/19/2023 - PDF - English - SAE
    Learn More
    €103.00

  • SAE AS 6944:2023-07-14

    Dynamic Seal Test Fixture
    7/14/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE J 1698/2:2023-07-14

    Event Data Recorder - Retrieval Tool Protocol
    7/14/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE J 1992:2023-07-14

    Wheels/Rims - Military Vehicles Test Procedures and Performance Requirements
    7/14/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AS 6029B:2023-07-12

    Criteria for Laser Control Measures for Aviation Safety
    7/12/2023 - PDF - English - SAE
    Learn More
    €135.00

  • SAE AS 6228A:2023-07-12

    Safety Requirements for Procurement, Maintenance, and Use of Handheld Powered Tools
    7/12/2023 - PDF - English - SAE
    Learn More
    €148.00

  • SAE AS 7228B:2023-07-12

    Rivets, Steel, Corrosion-Resistant 18Cr - 9Ni Solution Heat Treated, Procurement Specification for
    7/12/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE J 2121:2023-07-12

    Requirements for Composite Lighting Assemblies Used on Construction and Industrial Machinery
    7/12/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AIR 1412E:2023-07-11

    Designing for Long Life with Elastomers (Stabilized: Jul 2023)
    7/11/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AIR 4896A:2023-07-11

    Recommended RMS Terms and Parameters (Stabilized: Jul 2023)
    7/11/2023 - PDF - English - SAE
    Learn More
    €159.00

  • SAE AIR 6916:2023-07-11

    Guide for Safety, Efficiency, and Productivity in Buying Power Hand Tools
    7/11/2023 - PDF - English - SAE
    Learn More
    €143.00

  • SAE ARP 2654A:2023-07-11

    Ultrasonic Thickness Testing
    7/11/2023 - PDF - English - SAE
    Learn More
    €98.00

  • SAE AS 25274D:2023-07-11

    CAP, ELECTRICAL (WIRE END, CRIMP STYLE, TYPE II, CLASS 1) FOR 105 °C TOTAL CONDUCTOR TEMPERATURE (Stabilized: Jul 2023)
    7/11/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE/USCAR-38-2:2023-07-11

    PERFORMANCE SPECIFICATION FOR ULTRASONICALLY WELDED WIRE TERMINATIONS
    7/11/2023 - PDF - English - SAE
    Learn More
    €133.00

  • SAE/USCAR-53:2023-07-11

    INDUSTRIAL DATA COMMUNICATION FOR AUTOMOTIVE MANUFACTURING
    7/11/2023 - PDF - English - SAE
    Learn More
    €124.00

  • SAE ARP 6377:2023-07-10

    Human Engineering Considerations Associated with Design and Airborne Implementation of Head Worn Display (HWD) Systems
    7/10/2023 - PDF - English - SAE
    Learn More
    €142.00

  • SAE AS 39029/68:2023-07-10

    CONTACTS, ELECTRICAL CONNECTORS, PIN, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-24308 CONNECTORS)
    7/10/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 169:2023-07-10

    Design Guidelines for Air-Conditioning Systems for Off-Road Operator Enclosures
    7/10/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE J 2403DA:2023-07-10

    Digital Annex of Medium/Heavy-Duty E/E Systems Diagnosis Nomenclature
    7/10/2023 - PDF - English - SAE
    Learn More
    €193.00

  • SAE/USCAR-17-6:2023-07-10

    PERFORMANCE SPECIFICATION FOR AUTOMOTIVE RF CONNECTOR SYSTEMS (Stabilized: Jul 2023)
    7/10/2023 - PDF - English - SAE
    Learn More
    €131.00

  • SAE/USCAR-18-5:2023-07-10

    USCAR-17 SUPPLEMENT (Stabilized: Jul 2023)
    7/10/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE/USCAR-26-1:2023-07-10

    TEST PROCEDURE FOR ELECTRICAL GROUND ATTACHMENTS (Stabilized: Jul 2023)
    7/10/2023 - PDF - English - SAE
    Learn More
    €93.00

  • SAE/USCAR-30-1:2023-07-10

    PERFORMANCE SPECIFICATION FOR AUTOMOTIVE UNIVERSAL SERIAL BUS (USB) CONNECTION SYSTEM (Stabilized: Jul 2023)
    7/10/2023 - PDF - English - SAE
    Learn More
    €135.00

  • SAE AS 81934/2B:2023-07-07

    BEARING, SLEEVE, FLANGED, SELF-LUBRICATING, -65 °F TO 325 °F
    7/7/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AMS 1454A:2023-07-06

    Cleaning/Scale Removing Compound Aircraft Vacuum Toilet Systems (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE ARP 4457A:2023-07-06

    Torsion Strength Testing of Hydraulic Tube Joints (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 1959A:2023-07-06

    Insert - Ring Locked, Fluid Connection Port Design, Installation and Removal of (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AS 7928/12F:2023-07-06

    TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, BELL-MOUTHED, TIN WHISKER RESISTANT, TYPE II, CLASS 1 (FOR 105 °C TOTAL CONDUCTOR TEMPERATURE) (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE AS 7928/13D:2023-07-06

    TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER TERMINAL, LUG, INSULATED, TIN WHISKER RESISTANT, RING TONGUE, BELL-MOUTHED, TYPE II, CLASS 1 (FOR 150 °C TOTAL CONDUCTOR TEMPERATURE) (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AS 7928/8C:2023-07-06

    TERMINALS, LUG AND SPLICES, CONDUCTOR, CRIMP STYLE COPPER TERMINAL, LUG, CRIMP STYLE, COPPER, INSULATED, RING TONGUE, FOR THIN WALL WIRE, TIN WHISKER RESISTANT, TYPE II CLASS 1 FOR 105 °C TOTAL CONDUCTOR TEMPERATURE (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AS 9349B:2023-07-06

    CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, .204 HOLE (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AS 9391A:2023-07-06

    CLAMP, LOOP - MULTIPLE TUBE, DETACHABLE CUSHION, AMS5510 (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €54.00

  • SAE J 2601/2:2023-07-06

    Fueling Protocol for Gaseous Hydrogen Powered Heavy Duty Vehicles (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €96.00

  • SAE J 2706:2023-07-06

    Hybrid III Six-Year-Old Child Dummy User’s Manual (Stabilized: Jul 2023)
    7/6/2023 - PDF - English - SAE
    Learn More
    €140.00

  • SAE AMS 1424S:2023-07-03

    Fluid, Aircraft Deicing/Anti-Icing, SAE Type I
    7/3/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE AS 39029/67:2023-07-03

    CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, SHIELDED, SIZE 8 (FOR MIL-DTL-24308 CONNECTORS)
    7/3/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AS 5861C:2023-07-03

    Retainers, (Backup Rings), Hydraulic and Pneumatic, Polytetrafluoroethylene Resin, Solid, Un-Cut, for Use in Static Glands to AS5857
    7/3/2023 - PDF - English - SAE
    Learn More
    €107.00

  • SAE AS 9102C:2023-06-28

    Aerospace Series - First Article Inspection Requirements
    6/28/2023 - PDF - English - SAE
    Learn More
    €158.00

  • SAE AS 5756/1C:2023-06-28

    CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, NON-OZONE RESISTANT (Stabilized: Jun 2023)
    6/28/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE J 2860:2023-06-28

    User’s Manual for the Hybrid III Large Male Test Dummy (Stabilized: Jun 2023)
    6/28/2023 - PDF - English - SAE
    Learn More
    €149.00

  • SAE J 899:2023-06-28

    Operator’s Seat Dimensions for Off-Road Self-Propelled Work Machines (Stabilized: Jun 2023)
    6/28/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE J 947:2023-06-28

    Glossary of Fiberboard Terminology (Stabilized: Jun 2023)
    6/28/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE AMS 2451/10C:2023-06-27

    Plating, Brush, Tin-Zinc Low Hydrogen Embrittlement
    6/27/2023 - PDF - English - SAE
    Learn More
    €47.00

  • SAE AMS 3158E:2023-06-27

    Solution, Fluorescent Penetrant Water Base for LOX (Liquid Oxygen) Compatibility
    6/27/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE AMS 4299B:2023-06-27

    Aluminum Alloy, Plate (7449-T7951) 8.1Zn - 1.8Cu - 2.3Mg Solution Heat Treated, Stress Relieved, and Overaged
    6/27/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AMS 5951B:2023-06-27

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 20Cr - 10Co - 8.5Mo - 2.1Ti - 1.5Al - 0.005B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treated Precipitation Heat Treatable
    6/27/2023 - PDF - English - SAE
    Learn More
    €79.00

  • SAE AMS-R-25988B:2023-06-27

    Rubber: Fluorosilicone (FVMQ), Engine Oil / Fuel-Resistant, For Seals in Engine Oil Systems/Fuel Systems
    6/27/2023 - PDF - English - SAE
    Learn More
    €105.00

  • SAE ARP 994C:2023-06-27

    Design of Tubing Installations for Aerospace Hydraulic Systems
    6/27/2023 - PDF - English - SAE
    Learn More
    €120.00

  • SAE J 1706:2023-06-27

    Production, Handling, and Dispensing of SAE J1703 Motor Vehicle Brake Fluids and SAE J1704 Borate Ester-Based Brake Fluids
    6/27/2023 - PDF - English - SAE
    Learn More
    €66.00

  • SAE J 2236:2023-06-27

    Standard Method for Determining Continuous Upper Temperature Limit of Elastomers
    6/27/2023 - PDF - English - SAE
    Learn More
    €60.00

  • SAE J 2696:2023-06-27

    Inboard Mounted Disc Brake Rotor/Disc Wheel Hub Interface Dimensions - Commercial Vehicles
    6/27/2023 - PDF - English - SAE
    Learn More
    €75.00

  • SAE J 444:2023-06-27

    Cast Shot and Grit Size Specifications for Cleaning and Peening
    6/27/2023 - PDF - English - SAE
    Learn More
    €87.00

  • SAE J 994:2023-06-27

    Alarm - Backup - Electric Laboratory Performance Testing
    6/27/2023 - PDF - English - SAE
    Learn More
    €98.00

  • SAE ARP 7204:2023-06-20

    Polymeric Bearings for Linear Actuators
    6/20/2023 - PDF - English - SAE
    Learn More
    €122.00

  • SAE J 3280:2023-06-20

    Guidelines for Haptic Interaction in a Driver Vehicle Interface
    6/20/2023 - PDF - English - SAE
    Learn More
    €93.00

  • SAE AMS 3238K:2023-06-19

    Butyl (IIR) Rubber Phosphate Ester Resistant 65 - 75 (Stabilized: Jun 2023)
    6/19/2023 - PDF - English - SAE
    Learn More
    €70.00

  • SAE AS 1581E:2023-06-19

    FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 3000 PSI
    6/19/2023 - PDF - English - SAE
    Learn More
    €47.00

Items 401 to 600 of 13487 total

Set Ascending Direction
per page

List  Grid