SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE J 2747:2019-09-13
Hydraulic Pump Airborne Noise Bench Test (Stabilized: Sep 2019)
9/13/2019 - PDF - English -
Learn More€101.00 -
SAE J 1645:2019-09-13
Fuel Systems and Components - Electrostatic Charge Mitigation
9/13/2019 - PDF - English -
Learn More€152.00 -
€66.00
-
€60.00
-
SAE AS 3176B:2019-09-11
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3125-24 UNJF-3A
9/11/2019 - PDF - English -
Learn More€47.00 -
SAE AMS 5515N:2019-09-10
Steel, Corrosion Resistant, Sheet, Strip, and Plate 18Cr - 8.5Ni (302) Solution Heat Treated, High Ductility
9/10/2019 - PDF - English -
Learn More€60.00 -
SAE AS 3112B:2019-09-10
BOLT, MACHINE - HEXAGON HEAD, DRILLED 1 HOLE, PD SHANK, CRES (UNS S66286), .5000-20 UNJF-3A
9/10/2019 - PDF - English -
Learn More€47.00 -
SAE AS 9917B:2019-09-10
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, STEEL AMS6322, CADMIUM PLATED, .3750-24 UNJF-3A
9/10/2019 - PDF - English -
Learn More€47.00 -
SAE AS 81714/17B:2019-09-10
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, BUSSING MODULES, FEEDBACK TYPE, SIZE 22D, SERIES I
9/10/2019 - PDF - English -
Learn More€60.00 -
SAE AS 3175B:2019-09-10
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, 2500-28 UNJF-3A
9/10/2019 - PDF - English -
Learn More€47.00 -
SAE AMS 4316B:2019-09-10
Aluminum Alloy, Alclad Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075, -T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
9/10/2019 - PDF - English -
Learn More€70.00 -
SAE AS 3174B:2019-09-10
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .1900-32 UNJF-3A
9/10/2019 - PDF - English -
Learn More€47.00 -
SAE J 1726:2019-09-05
Charge Air Cooler Internal Cleanliness, Leakage, and Nomenclature
9/5/2019 - PDF - English -
Learn More€96.00 -
€54.00
-
SAE AS 6043C:2019-09-04
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON RUN, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English -
Learn More€60.00 -
SAE AS 6048C:2019-09-04
FITTING, ELBOW, 90°, STANDARD AND REDUCER, BULKHEAD, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English -
Learn More€54.00 -
SAE AS 6046C:2019-09-04
FITTING, CROSS, STANDARD AND REDUCER, FLARELESS, PRECISION TYPE
9/4/2019 - PDF - English -
Learn More€54.00 -
SAE J 2560:2019-09-04
Halogen Light Source Performance Requirements for Motor Vehicle Forward Lighting
9/4/2019 - PDF - English -
Learn More€150.00 -
SAE AMS 5709J:2019-09-04
Nickel Alloy, Corrosion and Heat-Resistant, Bars and Forgings 58Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted 1975 °F (1079 °C) Solution, Stabilization, and Precipitation Heat Treated
9/4/2019 - PDF - English -
Learn More€66.00 -
SAE AS 5901D:2019-09-04
Water Spray and High Humidity Endurance Test Methods for AMS1424 and AMS1428 Aircraft Deicing/Anti-Icing Fluids
9/4/2019 - PDF - English -
Learn More€89.00 -
SAE AS 27195B:2019-09-03
SEAL, BONDED, ALUMINIM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362 (Stabilized: Sep 2019)
9/3/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 4041T:2019-09-03
Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (2024, -T3 Sheet/-T351 Plate with 1-1/2% Alclad) Solution Heat Treated, Cold Worked and Naturally Aged
9/3/2019 - PDF - English -
Learn More€66.00 -
SAE AIR 5696A:2019-09-03
Aerospace Fluid Power - FAA Regulatory History - Transport Airplane Hydraulic Systems (Stabilized: Sep 2019)
9/3/2019 - PDF - English -
Learn More€135.00 -
SAE J 2772:2019-09-03
Measurement of Passenger Compartment Refrigerant Concentrations Under System Refrigerant Leakage Conditions
9/3/2019 - PDF - English -
Learn More€86.00 -
SAE AMS 4131E:2019-09-03
Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
9/3/2019 - PDF - English -
Learn More€75.00 -
SAE AS 27198C:2019-09-03
SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988 (Stabilized: Sep 2019)
9/3/2019 - PDF - English -
Learn More€70.00 -
€111.00
-
SAE AS 27196C:2019-09-03
SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROVE, FLUOROCARBON RUBBER, AMS7276 (Stabilized: Sep 2019)
9/3/2019 - PDF - English -
Learn More€70.00 -
SAE AS 81914/8B:2019-09-03
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, ANNULAR POLYVINYLIDENE FLUORIDE (PVDF), THERMALLY STABILIZED, STANDARD CONVOLUTIONS
9/3/2019 - PDF - English -
Learn More€47.00 -
€103.00
-
SAE AS 27197C:2019-09-03
SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268 (Stabilized: Sep 2019)
9/3/2019 - PDF - English -
Learn More€70.00 -
€96.00
-
SAE AMS 3310A:2019-08-30
Elastomer: Silicone Rubber (MQ/VMQ) Flame Retardant, Low Smoke Density, Low Smoke Toxicity, High Strength, 65 - 75 Durometer Type A Hardness For Products in Pressurized Aircraft Compartment Interiors
8/30/2019 - PDF - English -
Learn More€79.00 -
SAE AS 24122A:2019-08-30
WIRING HARNESS - EXTERNAL POWER, 115 VOLT AC, SINGLE PHASE (Stabilized: Aug 2019)
8/30/2019 - PDF - English -
Learn More€47.00 -
SAE AS 4897A:2019-08-30
Hose Assembly, Polytetrafluoroethylene (PTFE), Low Pressure, 450 °F and Fireproof, Procurement Specification for
8/30/2019 - PDF - English -
Learn More€103.00 -
SAE AS 81044/13B:2019-08-29
WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED HIGH STRENGTH COPPER ALLOY, LIGHT WEIGHT, 600-VOLT, 150 °C
8/29/2019 - PDF - English -
Learn More€47.00 -
SAE J 1227:2019-08-29
Assessing Cleanliness of Hydraulic Fluid Power Components and Systems
8/29/2019 - PDF - English -
Learn More€96.00 -
SAE AS 9359B:2019-08-28
NUT, CASTELLATED, HEXAGON, SILVER PLATED, CRES UNS S66286, 130 KSI MIN
8/28/2019 - PDF - English -
Learn More€47.00 -
SAE AMS 4427D:2019-08-28
Magnesium Alloy, Sand Castings 4.0Y - 2.3Nd - 0.7Zr (WE43B - T6) Solution and Precipitation Heat Treated
8/28/2019 - PDF - English -
Learn More€79.00 -
€47.00
-
SAE J 1518:2019-08-28
Three-Point Hitch (Type A) Backhoe Personnel Protection (Stabilized: Aug 2019)
8/28/2019 - PDF - English -
Learn More€79.00 -
SAE J 1737:2019-08-26
Test Procedure to Determine the Hydrocarbon Losses from Fuel Tubes, Hoses, Fittings, and Fuel Line Assemblies by Recirculation
8/26/2019 - PDF - English -
Learn More€119.00 -
€98.00
-
SAE AIR 5277B:2019-08-22
Aerospace Fluid Power - Waste Reduction Practices for Used Phosphate Ester Aviation Hydraulic Fluid (Stabilized: Aug 2019)
8/22/2019 - PDF - English -
Learn More€93.00 -
SAE TS 22AR-11:2019-08-20
TS22-AR Amendment Record for Technical Specification No. TS22
8/20/2019 - PDF - English -
Learn More€63.00 -
SAE J 3082:2019-08-20
Auxiliary Two-Conductor Electrical Power Connector for Truck-Trailer High-Power Jumper Cable
8/20/2019 - PDF - English -
Learn More€101.00 -
€70.00
-
SAE TS 22-11:2019-08-20
TS22 Manufacturing Specification for Bolts 1100 MPa (159,000 lbf/in²) Ultimate Tensile Strength Minimum at Room Temperature
8/20/2019 - PDF - English -
Learn More€138.00 -
SAE J 2847/1:2019-08-20
Communication for Smart Charging of Plug-in Electric Vehicles Using Smart Energy Profile 2.0
8/20/2019 - PDF - English -
Learn More€130.00 -
SAE ARP 5151A:2019-08-20
Safety Assessment of General Aviation Airplanes and Rotorcraft in Commercial Service
8/20/2019 - PDF - English -
Learn More€89.00 -
€136.00
-
SAE AS 4231D:2019-08-16
FITTING, ELBOW, 45°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4228D:2019-08-16
FITTING, ADAPTER, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4232D:2019-08-16
FITTING, ELBOW, 90°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4230D:2019-08-16
FITTING, ELBOW, 45°, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4229B:2019-08-16
FITTING, ADAPTER, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4233D:2019-08-16
FITTING, ELBOW, 90°, BULKHEAD, EXTERNAL THREAD, BEAM SEAL TO INTEGRAL WELD RING
8/16/2019 - PDF - English -
Learn More€54.00 -
SAE AS 3531B:2019-08-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, DRILLED HEAD, UNS S66286 - 160 KSI
8/14/2019 - PDF - English -
Learn More€103.00 -
SAE AS 8026B:2019-08-14
Crewmember Demand Oxygen Mask for Transport Category Aircraft
8/14/2019 - PDF - English -
Learn More€89.00 -
SAE AS 3530B:2019-08-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS S66286 - 160 KSI
8/14/2019 - PDF - English -
Learn More€103.00 -
SAE GEIA-TB 0002A:2019-08-14
System Configuration Management Implementation Template (Oriented for a U.S. Military Contract Environment) (Stabilized: Aug 2019)
8/14/2019 - PDF - English -
Learn More€126.00 -
SAE AS 21220C:2019-08-12
BEARING, ROLLER, ROD END, INTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE II, -67 TO 350 °F, SEALED
8/12/2019 - PDF - English -
Learn More€47.00 -
SAE AIR 5654A:2019-08-12
IEEE-1394b for Military and Aerospace Vehicles - Applications Handbook
8/12/2019 - PDF - English -
Learn More€154.00 -
SAE AS 6169A:2019-08-12
AS6169: Interface Standard, Airborne EO/IR Systems, Mechanical (Stabilized: Aug 2019)
8/12/2019 - PDF - English -
Learn More€146.00 -
€98.00
-
SAE AS 21223B:2019-08-12
BEARING, ROLLER, ROD END, EXTERNAL THREAD, SELF-ALIGNING, ANTI-FRICTION, AIRFRAME, HEAVY DUTY, TYPE I, -67° TO 350 °F, SEALED
8/12/2019 - PDF - English -
Learn More€47.00 -
SAE AS 85049/90E:2019-08-08
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
8/8/2019 - PDF - English -
Learn More€54.00 -
SAE AS 85049/89E:2019-08-08
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
8/8/2019 - PDF - English -
Learn More€54.00 -
SAE J 369:2019-08-08
Flammability of Polymeric Interior Materials - Horizontal Test Method
8/8/2019 - PDF - English -
Learn More€87.00 -
€47.00
-
SAE AS 21428/1B:2019-08-08
BEARING, BALL, AIRFRAME, ANTI-FRICTION, EXTRA LIGHT DUTY, PRECISION CORROSION RESISTANT NITROGEN STEEL (CREN)
8/8/2019 - PDF - English -
Learn More€54.00 -
SAE AS 85049/88E:2019-08-08
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES III AND IV CONNECTORS)
8/8/2019 - PDF - English -
Learn More€54.00 -
SAE AS 6294/3:2019-08-07
Requirements for Plastic Encapsulated Discrete Semiconductors in Space Applications
8/7/2019 - PDF - English -
Learn More€119.00 -
SAE J 174:2019-08-07
Torque-Tension Test Procedure for Steel Threaded Fasteners - Inch Series (Stabilized: Aug 2019)
8/7/2019 - PDF - English -
Learn More€60.00 -
SAE AS 85049/87E:2019-08-07
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
8/7/2019 - PDF - English -
Learn More€54.00 -
SAE AS 85049/86D:2019-08-06
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF-LOCKING, SHIELD BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION. CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
8/6/2019 - PDF - English -
Learn More€54.00 -
SAE AS 85560/1C:2019-08-06
BEARING, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, SELF-LUBRICATING, +250 °F
8/6/2019 - PDF - English -
Learn More€47.00 -
SAE AS 85049/84D:2021-05-20
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 90°, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, AS95234, MIL-DTL-26482 SERIES 2, AS81703 SERIES 3, AND MIL-DTL-83723 SERIES III CONNECTORS)
8/6/2019 - PDF - English -
Learn More€54.00 -
SAE J 2766:2019-08-06
Life Cycle Analysis to Estimate the CO2-Equivalent Emissions from MAC Operation
8/6/2019 - PDF - English -
Learn More€123.00 -
SAE AS 85049/85D:2019-08-06
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, STRAIGHT, SELF-LOCKING, SHIELD BAND TERMINATION (RFI/EMI), SHRINK BOOT ACCOMMODATION, CATEGORY 3B (FOR MIL-DTL-38999 SERIES I AND II CONNECTORS)
8/6/2019 - PDF - English -
Learn More€54.00 -
SAE AS 85049/83D:2019-08-06
CONNECTOR ACCESSORIES, ELECTRICAL, BACKSHELL, 45°, SELF LOCKING, SHIELD, BAND TERMINATION, (RFI/EMI), SHRINK SLEEVE ACCOMMODATION, CATEGORY 3B (FOR AS50151 CRIMP, AS95234, MIL-DTL 26482 SERIES 2, AS81703 SERIES 3 AND MIL-DTL-83723 SERIES III ONNECTORS)
8/6/2019 - PDF - English -
Learn More€54.00 -
€79.00
-
€54.00
-
€126.00
-
SAE AS 18029D:2019-08-01
COVER ASSEMBLY, ELECTRICAL, FOR MS27212 TERMINAL BOARD ASSEMBLY
8/1/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 4122M:2019-08-01
Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
8/1/2019 - PDF - English -
Learn More€60.00 -
€60.00
-
SAE AMS 4126D:2019-08-01
Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
8/1/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 4429B:2019-08-01
Magnesium Alloy, Sand Castings 2.8Nd - 1.4Gd - 0.4Zn - 0.6Zr (EV31A - T6) Solution and Precipitation Heat Treated
8/1/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 4186E:2019-08-01
Aluminum Alloy Bars, Rods, and Wire, Rolled or Cold Finished 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-F) As Fabricated, or When Specified, Annealed (7075-O)
8/1/2019 - PDF - English -
Learn More€60.00 -
€47.00
-
€81.00
-
SAE ARP 5029B:2019-07-30
Measurement Procedures for Short Pulse Width Strobe Anticollision Lights
7/30/2019 - PDF - English -
Learn More€131.00 -
€81.00
-
SAE AS 4134E:2019-07-29
TEE, BULKHEAD ON RUN, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€54.00 -
SAE AS 4139D:2019-07-29
FITTING ASSY, TEE, REDUCER, SWIVEL ON RUN, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€60.00 -
€54.00
-
SAE AS 4137D:2019-07-29
FITTING ASSY, ELBOW, REDUCER, 45°, SWIVEL, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€60.00 -
SAE AS 4141D:2019-07-29
FITTING ASSY,CROSS, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€60.00 -
SAE J 940:2019-07-29
Glossary of Carbon Steel Sheet and Strip Terms (Stabilized: Jul 2019)
7/29/2019 - PDF - English -
Learn More€86.00 -
SAE J 2990:2019-07-29
Hybrid and EV First and Second Responder Recommended Practice
7/29/2019 - PDF - English -
Learn More€144.00 -
€66.00
-
€54.00
-
SAE AS 4135D:2019-07-29
TEE, BULKHEAD ON SIDE, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€54.00 -
€75.00
-
SAE J 2534:2019-07-29
Recommended Practice for Pass-Thru Vehicle Programming (Stabilized: Jul 2019)
7/29/2019 - PDF - English -
Learn More€139.00 -
SAE AS 4138D:2019-07-29
FITTING ASSY, ELBOW, REDUCER, 90°, SWIVEL, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€60.00 -
€131.00
-
SAE AS 4132C:2019-07-29
ELBOW, 90°, BULKHEAD, STANDARD AND REDUCER, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€54.00 -
€54.00
-
SAE AS 4140E:2019-07-29
FITTING ASSY, TEE, REDUCER, SWIVEL ON SIDE, REDUCED BODY, FLARELESS
7/29/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 6378H:2019-07-26
Steel Bars 1.0Cr - 0.20Mo - 0.45Se (0.39 - 0.48C) (4142H Modified) Die-Drawn, 130 ksi (896 MPa) Yield Strength Free Machining
7/26/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4611J:2019-07-26
Brass, Naval, Bars and Rods 60.5Cu - 38.7Zn - 0.8Sn Half Hard (H02)
7/26/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 5844J:2019-07-24
Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened
7/24/2019 - PDF - English -
Learn More€66.00 -
€118.00
-
€83.00
-
SAE AMS 5845K:2019-07-24
Alloy, Corrosion-Resistant, Round Bars 20Cr - 35Ni - 35Co - 10Mo Vacuum Induction Plus Consumable Electrode Vacuum Remelted Solution Heat Treated, Work Strengthened, and Aged
7/24/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 4164J:2019-07-24
Aluminum Alloy, Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3510) Solution Heat Treated, Cold Worked, Stress-Relieved by Stretching, Unstraightened
7/24/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 5922C:2019-07-24
Steel, Corrosion-Resistant, Bars, and Forgings 10Cr - 5.5Ni - 14Co - 2Mo - 1W (0.19-0.23C) Vacuum Induction Melted, Vacuum Arc Remelted, Normalized, Annealed
7/24/2019 - PDF - English -
Learn More€75.00 -
€39.00
-
SAE AMS 2477D:2019-07-24
Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating
7/24/2019 - PDF - English -
Learn More€75.00 -
SAE AS 5491D:2019-07-24
Calculation of Electron Vacancy Number in Superalloys (Stabilized: Jul 2019)
7/24/2019 - PDF - English -
Learn More€75.00 -
SAE J 3143:2019-07-23
Non-Metallic, Non-Reinforced Automotive Air-Conditioning Refrigerant Line Assembly Requirements
7/23/2019 - PDF - English -
Learn More€101.00 -
SAE AMS 4505L:2019-07-23
Copper Alloy (Brass), Sheet, Strip, and Plate 70Cu - 30Zn Annealed (OS035)
7/23/2019 - PDF - English -
Learn More€60.00 -
SAE ARP 6415:2019-07-23
Use of Pb-Free Ball Grid Array Component Soldered Using SnPb Solder
7/23/2019 - PDF - English -
Learn More€126.00 -
SAE ARP 1070E:2019-07-22
Design and Testing of Antiskid Brake Control Systems for Total Aircraft Compatibility
7/22/2019 - PDF - English -
Learn More€144.00 -
SAE AMS 4063F:2019-07-18
Aluminum Alloy, Clad One Side, Sheet 1.25Mn - 0.12Cu (No. 11-0 Brazing Sheet) Annealed
7/18/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 5607G:2019-07-18
Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 73Ni - 7.0Cr - 16.5Mo Solution Heat Treated
7/18/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 7338A:2019-07-18
Rubber: Butyl (IIR Abbreviation) Phosphate Ester Resistant 65 to 75 Hardness for Seals in Hydraulic Systems, etc. (Stabilized: Jul 2019)
7/18/2019 - PDF - English -
Learn More€79.00 -
SAE AMS 2440C:2019-07-18
Inspection of Ground, Chromium Plated Steel Parts (Stabilized: Jul 2019)
7/18/2019 - PDF - English -
Learn More€89.00 -
SAE AMS 7601:2019-07-18
Rubber: Butyl (IIR) Low Compression Set and Low Moisture/Gas Permeability 65 to 75 Type A Hardness for Seals in Desiccated or Other Systems Requiring Resistance to Gas and/or Water Vapor Permeation
7/18/2019 - PDF - English -
Learn More€79.00 -
SAE J 2985:2019-07-17
Definition and Measurement of Transfer Case Speed-Dependent Parasitic Loss
7/17/2019 - PDF - English -
Learn More€86.00 -
€93.00 -
€93.00
-
SAE J 2843:2019-07-15
R-1234yf (HFO-1234yf) Recovery/Recycling/Recharging Equipment for Flammable Refrigerants for Mobile Air-Conditioning Systems
7/15/2019 - PDF - English -
Learn More€113.00 -
SAE J 2836/1:2019-07-15
Use Cases for Communication Between Plug-in Vehicles and the Utility Grid
7/15/2019 - PDF - English -
Learn More€165.00 -
SAE ARP 1302A:2019-07-15
Filter Patch Testing Procedures for Aerospace Hydraulic Non-Rotating Equipment
7/15/2019 - PDF - English -
Learn More€66.00 -
€54.00
-
€54.00
-
SAE AMS 4214K:2019-07-12
Castings, Aluminum Alloy Sand 5.0Si - 1.2Cu - 0.50Mg (355.0-T71) Solution Heat Treated and Overaged
7/12/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 2753D:2019-07-12
Liquid Salt Bath Ferritic Nitrocarburizing Non-Cyanide Bath (Stabilized: Jul 2019)
7/12/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 5511K:2019-07-12
Steel, Corrosion-Resistant, Sheet, Strip, and Plate 19Cr - 9.5Ni (304L) Solution Heat Treated
7/12/2019 - PDF - English -
Learn More€60.00 -
SAE AMS 4319C:2019-07-12
Aluminum Alloy, Rolled or Cold Finished, Bars and Rods 12.2Si - 1.0Mg - 0.90Cu - 0.90Ni (4032-T651) Solution Heat Treated, Stress Relieved, Artificially Aged
7/12/2019 - PDF - English -
Learn More€54.00 -
€126.00
-
€101.00
-
€103.00
-
SAE AS 5506/4:2019-07-10
Architecture Analysis & Design Language (AADL) Annex F: AADL Annex for the FACE™ Technical Standard Edition 3.0
7/10/2019 - PDF - English -
Learn More€136.00 -
€101.00
-
SAE AS 6294/4:2019-07-09
Requirements for Plastic Encapsulated Discrete Semiconductors in Military and Avionics Applications
7/9/2019 - PDF - English -
Learn More€83.00 -
SAE AS 5643/1A:2019-07-09
S400 Copper Media Interface Characteristics Over Extended Distances
7/9/2019 - PDF - English -
Learn More€107.00 -
SAE ARP 4118B:2019-07-09
Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair
7/9/2019 - PDF - English -
Learn More€79.00 -
SAE AS 81044B:2019-07-08
Wire, Electrical, Crosslinked Polyalkene, Crosslinked Alkane-Imide Polymer, or Polyarylene Insulated, Copper or Copper Alloy
7/8/2019 - PDF - English -
Learn More€123.00 -
SAE AS 7513A:2019-07-08
MALE FERRULE, THREADLESS, - FLEXIBLE, FIXED CAVITY, CURRENT CARRYING, SELF BONDING, SWAGED
7/8/2019 - PDF - English -
Learn More€47.00 -
SAE AS 39029/64C:2019-07-08
CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR MIL-DTL-24308 CONNECTORS)
7/8/2019 - PDF - English -
Learn More€54.00 -
SAE AS 20659G:2019-07-08
TERMINAL, LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE, TYPE I, CLASS 1, FOR 175 °C OR 260 °C TOTAL CONDUCTOR TEMPERATURE
7/8/2019 - PDF - English -
Learn More€70.00 -
SAE AS 23190/4D:2019-07-03
MOUNTING HARDWARE, CUSHION CLAMP, METAL FOR CABLE HARNESS TYING AND SUPPORT, TYPE V, CLASS 1
7/3/2019 - PDF - English -
Learn More€89.00 -
SAE AMS 4450:2019-07-03
Aluminum Alloy, Extruded Profiles (2043-T85) 2.8Cu - 1.65Li - 0.35Mg - 0.1Zr Solution Heat Treated, Stress Relieved by Stretching, and Aged
7/3/2019 - PDF - English -
Learn More€66.00 -
€83.00
-
€70.00
-
SAE AMS 3214M:2019-07-03
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35 - 45 (Stabilized: Jul 2019)
7/3/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4317B:2019-07-02
Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075-T76(51X) Solution Heat Treated and Overaged
7/2/2019 - PDF - English -
Learn More€66.00 -
SAE AS 3553B:2019-07-02
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, COUNTERBORED 180 KSI, 1400 °F, UNS N07001
7/2/2019 - PDF - English -
Learn More€47.00 -
€128.00
-
€93.00
-
SAE MA 1567C:2019-07-01
Insert, Screw Thread, Helical Coil Metric Series, Standard Assembly Dimensions for (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€101.00 -
SAE AS 5133A:2019-07-01
Nut, Floating, Attached Retention Element (A.R.E.) - Hole Dimensions and Installation Requirements (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€60.00 -
€79.00
-
SAE AS 4892B:2019-07-01
Insert, Screw Thread, Self-Locking, UNS S66286, Locked in, Key Locked Procurement Specification for (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€119.00 -
SAE AMS 5609E:2019-07-01
Steel, Corrosion and Heat Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 12Cr - 0.12Cb (Nb) (410 Modified) Ferrite Controlled, Annealed
7/1/2019 - PDF - English -
Learn More€75.00 -
SAE AS 3507C:2019-07-01
Insert - Thin Wall, Self-Locking Short and Long Length Installation and Removal of (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€103.00 -
SAE AS 4389A:2019-07-01
Nut - Self-Locking Clinch, Serrated Shank, Hole Preparation, Installation and Removal Procedures (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€66.00 -
SAE AS 3129C:2019-07-01
PLUG, EXPANSION - CRES, 303, LONG, STD AND .010 OVERSIZE DIAMETERS, UNS S30300 (Stabilized: Jul 2019)
7/1/2019 - PDF - English -
Learn More€54.00 -
€79.00
-
€70.00
-
SAE J 2842:2019-06-25
R-1234yf and R744 Design Criteria and Certification for OEM Mobile Air Conditioning Evaporator and Service Replacements
6/25/2019 - PDF - English -
Learn More€118.00 -
SAE AMS 2474E:2019-06-25
Chemical Treatment for Aluminum Alloys Low Electrical Resistance Coating (Stabilized: Jun 2019)
6/25/2019 - PDF - English -
Learn More€70.00 -
€39.00
-
SAE AMS 4926P:2019-06-20
Titanium Alloy, Bars, Wire, and Rings 5Al - 2.5Sn Annealed, 110 ksi (758 MPa) Yield Strength
6/20/2019 - PDF - English -
Learn More€75.00 -
SAE AS 3552B:2019-06-20
NUT, SELF-LOCKING, DOUBLE HEXAGON, SILVER PLATED, EXTENDED WRENCH PAD 180 KSI, 1400 °F, UNS N07001
6/20/2019 - PDF - English -
Learn More€47.00 -
SAE AS 3255D:2019-06-20
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5000-20 UNJF-3A
6/20/2019 - PDF - English -
Learn More€47.00 -
SAE AS 9364B:2019-06-20
NUT, SLOTTED, HEXAGON, SHEAR - SILVER PLATED, UNS S66286, 130 KSI MIN
6/20/2019 - PDF - English -
Learn More€47.00 -
SAE MA 3331D:2019-06-20
INSERT, SCREW THREAD, HELICAL COIL, METRIC SERIES, SCREW LOCKING, CRES, CADMIUM PLATED
6/20/2019 - PDF - English -
Learn More€60.00 -
SAE AS 3123B:2019-06-19
PLUG, EXPANSION - ALUMINUM, 2024-T4 AND 2024-T351, SHORT, STD AND .010 OVERSIZE DIAMETERS, UNS A92024 (Stabilized: Jun 2019)
6/19/2019 - PDF - English -
Learn More€54.00 -
SAE AS 3128C:2019-06-19
PIN, EXPANSION - CRES, 416 OR 416SE, SHORT, UNS S41600/UNS S41623 (Stabilized: Jun 2019)
6/19/2019 - PDF - English -
Learn More€47.00 -
SAE AMS 3260D:2019-06-17
Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45 - 55 (Stabilized: Jun 2019)
6/17/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 6264M:2019-06-17
Steel, Carburizing Grade, Bars, Forgings, and Tubing 1.2Cr - 3.2Ni - 0.12Mo (0.14 - 0.20C) (9317)
6/17/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4764G:2019-06-17
Copper Alloy, Brazing Filler Metal 52.5Cu - 38Mn - 9.5Ni 1615 to 1700 °F (879 to 927 °C) Solidus-Liquidus Range
6/17/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 4152N:2019-06-17
Aluminum Alloy Extrusions 4.4Cu - 1.5Mg - 0.60Mn (2024-T3) Solution Heat Treated and Cold Worked
6/17/2019 - PDF - English -
Learn More€66.00 -
SAE J 1835:2019-06-17
Fastener Hardware for Wheels for Demountable Rims (Stabilized: Jun 2019)
6/17/2019 - PDF - English -
Learn More€75.00 -
SAE AMS 3253B:2019-06-17
Ethylene Propylene Rubber Phosphate Ester Resistant 65 - 75 (Stabilized: Jun 2019)
6/17/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 3195H:2019-06-14
Silicone Rubber Sponge Closed Cell, Medium (Stabilized: Jun 2019)
6/14/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 3193F:2019-06-14
Silicone Rubber Sponge Closed Cell, Medium, Extreme Low Temperature (Stabilized: Jun 2019)
6/14/2019 - PDF - English -
Learn More€66.00 -
SAE AMS 3194F:2019-06-14
Silicone Rubber Sponge Closed Cell, Firm, Extreme Low Temperature (Stabilized: Jun 2019)
6/14/2019 - PDF - English -
Learn More€66.00 -
€81.00
-
€63.00
-
SAE AMS 3617F:2019-06-13
Polyamide Type 6-6, Plastic Moldings and Extrusions (Stabilized: Jun 2019)
6/13/2019 - PDF - English -
Learn More€70.00 -
SAE AMS 3220H:2019-06-11
Rubber, Synthetic General Purpose, Fluid Resistant 55 - 65 (Stabilized: Jun 2019)
6/11/2019 - PDF - English -
Learn More€70.00 -
SAE J 2203:2019-06-11
SAE 17.6 Cubic Inch Spark Plug Rating Engine (Stabilized: Jun 2019)
6/11/2019 - PDF - English -
Learn More€150.00 -
€87.00
-
€75.00
