SAE ®
|
SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.
With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.
They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance. |
 |
-
SAE AS 3543B:2019-12-03
STUD, LOCKED IN, KEY LOCKED, UNS S66286, 140 KSI/1200 °F LIGHTWEIGHT, SELF-BROACHING KEYS
12/3/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AIR 6918:2019-12-02
Management of Change Considerations for Aero Gas Turbine Engine Lubricants Under AS5780
12/2/2019 - PDF - English - SAE
Learn More€54.00 -
SAE AMS 6400A:2019-12-02
Forgings, Steel For Aircraft/Aerospace Equipment (Stabilized: Dec 2019)
12/2/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AS 3152B:2019-12-02
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, AMS4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A
12/2/2019 - PDF - English - SAE
Learn More€47.00 -
€123.00
-
SAE AS 6049B:2019-12-02
FITTING, TEE, STANDARD AND REDUCER, BULKHEAD ON SIDE, FLARELESS, PRECISION TYPE
12/2/2019 - PDF - English - SAE
Learn More€60.00 -
€86.00
-
SAE AMS 3306D:2019-11-26
Elastomer: Methyl/Methyl Vinyl Silicone, (MQ/MVQ) High Temperature/Gas Turbine Engine Oil/Phosphate Esther Hydraulic Fluid Resistant High Strength/High Tear/High Modulus 55 to 65 Type “A” Hardness For Products in High Temperature Environments/Gas Turbine Engine Oils
11/26/2019 - PDF - English - SAE
Learn More€75.00 -
SAE J 2782:2019-11-26
Performance Specifications for a Midsize Male Pedestrian Research Dummy
11/26/2019 - PDF - English - SAE
Learn More€148.00 -
€60.00
-
SAE AMS 4328B:2019-11-25
Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
11/25/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 4456A:2019-11-25
Aluminum Alloy, Hand Forgings 8.0Zn - 1.0Cu - 1.6Mg - 0.12Zr (7037-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged
11/25/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 5833E:2019-11-25
Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold Drawn
11/25/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5834E:2019-11-25
Cobalt Alloy, Corrosion and Heat-Resistant, Round Wire 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Cold Drawn, and Aged
11/25/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS 6949A:2019-11-25
Titanium Alloy, Sheet and Strip 4Al - 2.5V - 1.5Fe Electron Beam Single Melted. Annealed
11/25/2019 - PDF - English - SAE
Learn More€70.00 -
€47.00
-
SAE AS 3545A:2019-11-21
INSERT, SCREW THREAD, SELF-LOCKING, LOCKED IN, KEY LOCKED, HEAVY-DUTY, SELF-BROACHING KEYS, UNS S66286
11/21/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3546B:2019-11-21
INSERT, SCREW THREAD, SELF-LOCKING LOCKED IN, KEY LOCKED, EXTRA HEAVY DUTY, SELF-BROACHING KEYS, UNS S66286
11/21/2019 - PDF - English - SAE
Learn More€47.00 -
€54.00
-
€47.00
-
SAE J 2523:2019-11-20
Rolling Circumference Index Groups for Agricultural Tractor Drive Tires
11/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE J 3013:2019-11-20
Friction Material Elastic Constants Determination through FRF Measurements and Optimization (Stabilized: Nov 2019)
11/20/2019 - PDF - English - SAE
Learn More€96.00 -
SAE J 3175:2019-11-20
Road Vehicles - Friction Materials - Finished Brake Pad Normalized Elastic Constant of Friction Material
11/20/2019 - PDF - English - SAE
Learn More€79.00 -
€93.00
-
€70.00
-
€107.00
-
SAE AIR 5433C:2019-11-19
Lubricating Characteristics and Typical Properties of Lubricants Used in Aviation Propulsion and Drive Systems
11/19/2019 - PDF - English - SAE
Learn More€135.00 -
SAE AMS-QQ-A-200/3A:2019-11-19
Aluminum Alloy 2024, Bar, Rod, Shapes, Tube, and Wire, Extruded (Stabilized: Nov 2019)
11/19/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS-QQ-A-200C:2019-11-19
Aluminum Alloy, Bar, Rod, Shapes, Structural Shapes, Tube, and Wire, Extruded: General Specification for (Stabilized: Nov 2019)
11/19/2019 - PDF - English - SAE
Learn More€89.00 -
SAE AS 10081B:2019-11-19
TERMINAL SHANK-SWAGING, DIMENSIONS FOR (Stabilized: Nov 2019)
11/19/2019 - PDF - English - SAE
Learn More€60.00 -
€138.00
-
SAE J 3106:2019-11-19
Vacuum Excavation and Sewer Cleaning Equipment Classification and Nomenclature
11/19/2019 - PDF - English - SAE
Learn More€86.00 -
SAE J 3171:2019-11-19
Identifying Automated Driving Systems-Dedicated Vehicles (ADS-DVs) Passenger Issues for Persons with Disabilities
11/19/2019 - PDF - English - SAE
Learn More€122.00 -
€79.00
-
SAE AIR 7765:2019-11-18
Considerations for Hydrogen Fuel Cells in Airborne Applications
11/18/2019 - PDF - English - SAE
Learn More€120.00 -
SAE AMS 7012:2019-11-14
Precipitation Hardenable Steel Alloy, Corrosion and Heat-Resistant Powder for Additive Manufacturing 16.0Cr - 4.0Ni - 4.0Cu - 0.30Nb
11/14/2019 - PDF - English - SAE
Learn More€70.00 -
€47.00
-
€47.00
-
€60.00
-
€154.00
-
SAE J 966:2019-11-14
Test Procedure for Measuring Passenger Car Tire Revolutions Per Mile
11/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE J 1798:2019-11-13
Recommended Practice for Performance Rating of Electric Vehicle Battery Modules (Stabilized: Nov 2019)
11/13/2019 - PDF - English - SAE
Learn More€103.00 -
SAE J 2570:2019-11-13
Performance Specifications for Anthropomorphic Test Device Transducers
11/13/2019 - PDF - English - SAE
Learn More€101.00 -
€124.00
-
SAE ARP 4150A:2019-11-12
Procedure for Inspection of In-Service Airborne Accumulators for Corrosion and Damage
11/12/2019 - PDF - English - SAE
Learn More€66.00 -
€47.00
-
SAE AS 81969/3A:2019-11-12
INSTALLING AND REMOVAL TOOLS, CONNECTOR ELECTRICAL CONTACT, TYPE II, CLASS 1, COMPOSITION C
11/12/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 6224/2:2019-11-11
REPAIR SLEEVE, LARGE WIRE/CABLE INSULATION DAMAGE, ELECTRIC, PERMANENT, ENVIRONMENT RESISTANT, 260 °C MAXIMUM OPERATING TEMPERATURE, TYPE II
11/11/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 5964B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 45° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5965B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 45° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 5966B:2019-11-08
HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE CRES BRAID REINFORCED, 400 °F, 5080 PSI FLARELESS, 90° ELBOW TO 90° ELBOW (Stabilized: Nov 2019)
11/8/2019 - PDF - English - SAE
Learn More€66.00 -
€66.00
-
€170.00
-
€79.00
-
SAE AMS 2262H:2019-11-05
Tolerances Nickel, Nickel Alloy, and Cobalt Alloy Sheet, Strip, and Plate
11/5/2019 - PDF - English - SAE
Learn More€70.00 -
€60.00
-
SAE AMS 3215N:2019-11-05
Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 65 - 75 (Stabilized: Nov 2019)
11/5/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 4931G:2019-11-05
Titanium Alloy Bars, Forgings, and Rings 6Al - 4V Extra Low Interstitial (ELI) Duplex Annealed, Fracture Toughness
11/5/2019 - PDF - English - SAE
Learn More€75.00 -
€70.00
-
SAE AMS 4990D:2019-11-05
Titanium Alloy Sheet, Strip, and Plate 6Al - 6V - 2Sn Solution Heat Treated and Aged
11/5/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5342F:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1100) 130 ksi (896 MPa) Tensile Strength (17-4)
11/5/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 5343F:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb (Nb) - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4)
11/5/2019 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 5344G:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 16Cr - 4.1Ni - 0.28Cb - 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength (17-4)
11/5/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 5346D:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H925) 180 ksi (1241 MPa) Tensile Strength (15-5)
11/5/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 5347C:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb (Nb) - 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5)
11/5/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 5357E:2019-11-05
Steel, Corrosion-Resistant, Investment Castings 15Cr - 4.6Ni - 0.22Cb - 2.8Cu Solution Heat Treated, Precipitation Hardenable
11/5/2019 - PDF - English - SAE
Learn More€89.00 -
SAE AMS 5642M:2019-11-05
Steel, Corrosion and Heat-Resistant, Bars, Wire, and Forgings 18Cr - 10.5Ni - 0.60Cb Free-Machining, Solution Heat Treated
11/5/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 5738E:2019-11-05
Steel, Corrosion Resistant, Bars and Wire 18Cr - 9Ni (303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked
11/5/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 5857D:2019-11-05
Steel, Corrosion Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength Solution Heat Treated and Cold Worked
11/5/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 5891C:2019-11-05
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 60Ni - 22Cr - 2.0Mo - 14W - 0.35Al - 0.03La Solution Heat Treated
11/5/2019 - PDF - English - SAE
Learn More€70.00 -
€60.00
-
€66.00
-
SAE AS 3655A:2019-11-01
CABLE, SAFETY, NICKEL ALLOY, CORROSION RESISTANT (UNS N06625)
11/1/2019 - PDF - English - SAE
Learn More€47.00 -
€79.00
-
SAE AMS 2488E:2019-10-31
Anodic Treatment - Titanium and Titanium Alloys Solution pH 13 or Higher
10/31/2019 - PDF - English - SAE
Learn More€87.00 -
SAE AS 4536D:2019-10-31
Safety Cable Kit Procurement Specification and Requirement for Use
10/31/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AS 9226B:2019-10-31
WIRE - STEEL, CORROSION AND HEAT RESISTANT, SAFETY, 1800 °F
10/31/2019 - PDF - English - SAE
Learn More€39.00 -
€60.00
-
SAE J 2450/1:2019-10-31
SAE J2450 Supplemental Training Document (Stabilized: Oct 2019)
10/31/2019 - PDF - English - SAE
Learn More€160.00 -
€87.00
-
SAE MA 3513A:2019-10-31
BOLT, MACHINE - SPLINE DRIVE, EXTENDED WASHER HEAD, PD SHANK, LONG THREAD, UNS N07001, METRIC
10/31/2019 - PDF - English - SAE
Learn More€83.00 -
SAE AMS 7909D:2019-10-29
Aluminum Beryllium, NNS Preforms Hot Isostatic Pressed 38Al - 62Be (Stabilized: Oct 2019)
10/29/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AMS-P-21600B:2019-10-28
Paint System, Fluorescent, Removable, for Aircraft Application (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€105.00 -
SAE AS 5505A:2019-10-28
Requirements for Accreditation of Testing Laboratories for Organic Coatings (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€83.00 -
SAE AS 683E:2019-10-28
Installation Procedures and Torques for Fluid Connections
10/28/2019 - PDF - English - SAE
Learn More€93.00 -
SAE J 1142:2019-10-28
Towability Design Criteria and Equipment Use - Passenger Cars, Vans, and Light-Duty Trucks (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€123.00 -
SAE J 1144:2019-10-28
Towed Vehicle Drivetrain Test Procedure Passenger Cars, Vans, and Light-Duty Trucks (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€70.00 -
SAE J 1828:2019-10-28
Uniform Reference and Dimensional Guidelines for Collision Repair (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€114.00 -
SAE J 2069:2019-10-28
Recovery Attachment Points for Passenger Cars, Vans, and Light Trucks (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€54.00 -
SAE J 2376:2019-10-28
New-Vehicle Collision Repair Information (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€89.00 -
SAE J 2621:2019-10-28
Qualifying Aftermarket Two-Component Structural Foams (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€79.00 -
SAE J 2667:2019-10-28
STRSW (Squeeze Type Resistance Spot Welding) Equipment Acceptance Criteria for the Collision Repair Industry (Stabilized: Oct 2019)
10/28/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AS 506A:2019-10-25
High Temperature Insulated Terminals & Splices (Stabilized: Oct 2019)
10/25/2019 - PDF - English - SAE
Learn More€86.00 -
SAE AMS 3346H:2019-10-24
Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type “A” Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments
10/24/2019 - PDF - English - SAE
Learn More€75.00 -
SAE AMS 4293A:2019-10-24
Aluminum Alloy Extrusions 7.9Zn - 1.6Cu - 2.2Mg - 0.16Cr (7249-T76511) Solution Heat Treated, Stress-Relieved, Straightened, and Overaged
10/24/2019 - PDF - English - SAE
Learn More€66.00 -
SAE J 1143:2019-10-24
Towed Vehicle/Tow Equipment Attachment Test Procedure - Passenger Cars, Vans, and Light-Duty Trucks (Stabilized: Oct 2019)
10/24/2019 - PDF - English - SAE
Learn More€83.00 -
SAE J 1555:2019-10-24
Recommended Practice for Optimizing Automobile Damageability and Repairability (Stabilized: Oct 2019)
10/24/2019 - PDF - English - SAE
Learn More€114.00 -
€83.00
-
€47.00
-
SAE J 2512:2019-10-24
Towing Equipment Ratings and Practices (Stabilized: Oct 2019)
10/24/2019 - PDF - English - SAE
Learn More€107.00 -
SAE AS 21447C:2019-10-22
BEARING, ROLLER, NEEDLE, TRACK ROLLER, CROWN RADIUSED OD INTEGRAL STUD, TYPE VII ANTIFRICTION, INCH
10/22/2019 - PDF - English - SAE
Learn More€54.00 -
€105.00
-
SAE J 1476:2019-10-21
Parking Brake Structural Integrity Test Procedure Vehicles Over 4500 kg (10 000 lb) GVWR—Truck and Bus
10/21/2019 - PDF - English - SAE
Learn More€60.00 -
SAE J 2633:2019-10-21
Wheel and Wheel Trim Weathering Testing for Paint Coatings
10/21/2019 - PDF - English - SAE
Learn More€54.00 -
€75.00
-
SAE ARP 1161B:2019-10-18
Crew Station Lighting - Commercial Aircraft (Stabilized: Oct 2019)
10/18/2019 - PDF - English - SAE
Learn More€127.00 -
€47.00
-
SAE AMS 3144A:2019-10-17
Primer, Anodic Electrodeposition for Aircraft Applications
10/17/2019 - PDF - English - SAE
Learn More€103.00 -
SAE AMS 4173G:2019-10-17
Aluminum Alloy, Extrusions 1.0Mg - 0.60Si - 0.30Cu - 0.20Cr (6061-T6511 or T6510) Solution Heat Treated, Stress Relieved by Stretching, Straightened, and Precipitation Heat Treated
10/17/2019 - PDF - English - SAE
Learn More€66.00 -
SAE J 1729:2019-10-17
Parking Brake Drawbar Pull Test Procedure - Truck and Bus
10/17/2019 - PDF - English - SAE
Learn More€93.00 -
SAE AMS 3217/1C:2019-10-16
Test Slabs, Acrylonitrile Butadiene (NBR-H) Medium-High Acrylonitrile, 65 - 75
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 3217/7B:2019-10-16
Test Slabs, High Strength, Fluorosilicone (FVMQ) 55 - 65
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AMS 5671H:2019-10-16
Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb - 2.5Ti - 0.70Al - 7.0Fe Consumable Electrode or Vacuum Induction Melted 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable
10/16/2019 - PDF - English - SAE
Learn More€79.00 -
SAE AMS 7264B:2019-10-16
Rubber: Methyl Vinyl Silicone (MVQ) High Temperature Resistant, Low Compression Set 65 - 75 Type “A” Hardness For Seals in a Static Application - Resistant to 500 °F (260 °C)
10/16/2019 - PDF - English - SAE
Learn More€79.00 -
SAE AS 9697E:2019-10-16
BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, CORROSION AND HEAT RESISTANT STEEL, UNS N07001, 165 KSI MIN, .2500-28 UNJF-3A
10/16/2019 - PDF - English - SAE
Learn More€47.00 -
SAE J 2184:2019-10-16
Vehicle Lift Points for Service Garage Lifting (Stabilized: Oct 2019)
10/16/2019 - PDF - English - SAE
Learn More€86.00 -
SAE TS 128-7:2019-10-16
TS128 "All-Metal" Self-Locking Nuts (UNJ Threads) 1100 MPa (160,000 lbf/in²) Minimum Tensile Strength at Room Temperature
10/16/2019 - PDF - English - SAE
Learn More€194.00 -
SAE TS 128AR-7:2019-10-16
TS128AR Amendment Record for Technical Specification No. TS128
10/16/2019 - PDF - English - SAE
Learn More€81.00 -
SAE TS 24AR-7:2019-10-16
TS24AR Amendment Record for Technical Specification No. TS24
10/16/2019 - PDF - English - SAE
Learn More€81.00 -
SAE AS 24509B:2019-10-15
CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, TOGGLE, 5 THRU 15 AMP, TYPE I
10/15/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AS 3486E:2019-10-15
NUT, SELF-LOCKING, EXTENDED DOUBLE HEXAGON, REDUCED FLANGE, DRY FILM LUBE, UNS S66286, CLASS: 160 KSI/800 °F
10/15/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9964B:2019-10-15
BOLT, MACHINE, HEXAGON HEAD, DRILLED, 6 HOLE, PD SHANK, STEEL AMS6322 (UNS G87400), CADMIUM PLATED, .6250-18 UNJF-3A
10/15/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AIR 5713A:2019-10-14
In-Service Reliability Data of Continuously Active Ball Screw and Geared Flight Control Actuation Systems
10/14/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 3177B:2019-10-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .3750-24 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 3179B:2019-10-14
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .5000-20 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 4787A:2019-10-14
Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware
10/14/2019 - PDF - English - SAE
Learn More€116.00 -
€47.00
-
SAE AS 9723:2019-10-14
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .1900-32 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9725:2019-10-14
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .3125-24 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9726:2019-10-14
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .3750-24 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9727:2019-10-14
BOLT, MACHINE - DOUBLE HEXAGON, EXTENDED WASHER HEAD, CLOSE TOLERANCE SHANK, UNS N07001, 165 KSI, .4375-20 UNJF-3A
10/14/2019 - PDF - English - SAE
Learn More€47.00 -
SAE J 2983:2019-10-14
Recommended Practice for Determining Material Properties of Li-Battery Separator
10/14/2019 - PDF - English - SAE
Learn More€109.00 -
€54.00
-
€54.00
-
€54.00
-
€60.00
-
SAE AMS 2525E:2019-10-10
Graphite Coating, Thin Lubricating Film Impingement Applied
10/10/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AMS 6517B:2019-10-10
Steel, Bars, and Forgings 3.5Cr - 9.5Ni - 18Co - 1.1Mo (0.13 - 0.17C) Double Vacuum Melted, Normalized, Annealed
10/10/2019 - PDF - English - SAE
Learn More€75.00 -
€98.00
-
€89.00
-
SAE J 2122:2019-10-09
Numbering System for Single Diameter Drills (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€98.00 -
€98.00
-
SAE J 2124:2019-10-09
Numbering System for Single Diameter and Taper Reamers (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€103.00 -
SAE J 2276:2019-10-09
Numbering System for Multiple Diameter Cutting Tools (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€103.00 -
€86.00
-
€89.00
-
SAE J 2431:2019-10-09
The Effects of Front-Mounted Accessories on Air Bag Sensors and Crashworthiness (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€66.00 -
SAE J 2440:2019-10-09
Domestic Performance Torque Converter Manufacturing (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€75.00 -
SAE J 2492:2019-10-09
Considerations for Suspension Modification (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€89.00 -
€128.00
-
SAE J 2881:2019-10-09
Measurement of Aerodynamic Performance for Mass-Produced Cars and Light-Duty Trucks
10/9/2019 - PDF - English - SAE
Learn More€101.00 -
SAE J 839:2019-10-09
Passenger Car Side Door Latch Systems (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€75.00 -
SAE J 934:2019-10-09
Vehicle Passenger Door Hinge Systems (Stabilized: Oct 2019)
10/9/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 34591D:2019-10-08
CONNECTOR, PLUG, ELECTRICAL, SELF-LOCKING, COUPLING NUT, REAR RELEASE, CRIMP CONTACT, AN TYPE
10/8/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AS 41100-8:2019-10-07
AS41100-109 Nut, Clip, Self-Locking, Floating, Assembly of
10/7/2019 - PDF - English - SAE
Learn More€81.00 -
SAE AS 41100AR-8:2019-10-07
AS41100AR Amendment Record for Drawing Standard No. AS41100-109
10/7/2019 - PDF - English - SAE
Learn More€81.00 -
€93.00
-
SAE J 2255:2019-10-07
Antilock Brake Systems Energy Consumption Test Procedure for Air-Brake-Equipped Truck Tractors, Buses, Trailers, and Dollies
10/7/2019 - PDF - English - SAE
Learn More€83.00 -
SAE J 2535:2019-10-07
Setting Preload in Heavy-Duty Wheel Bearings (Stabilized: Oct 2019)
10/7/2019 - PDF - English - SAE
Learn More€75.00 -
€54.00
-
SAE AMS 4901U:2019-10-04
Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa)
10/4/2019 - PDF - English - SAE
Learn More€70.00 -
SAE AS 60491/1:2019-10-03
SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55 TO +200 °C)
10/3/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 60491/2:2019-10-03
SLEEVE, CHAFE-PROTECTION, WRAP-AROUND, SELF-CLOSING (-55° TO +260°C)
10/3/2019 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
SAE AS 60491/4:2019-10-03
SLEEVE, CHAFE-PROTECTION, HIGH ABRASION EXPANDABLE (-55 TO +200 °C)
10/3/2019 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
€81.00
-
€114.00
-
SAE J 1746:2019-10-03
ISP-Vehicle Location Referencing Standard (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€109.00 -
SAE J 2319:2019-10-03
Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€96.00 -
SAE J 2375:2019-10-03
The Selection of Adhesives for the Attachment of Exterior Aftermarket Accessories (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€70.00 -
SAE J 2379:2019-10-03
Performance Engine Building Recommended Practices (Stabilized: Oct 2019)
10/3/2019 - PDF - English - SAE
Learn More€83.00 -
SAE AIR 4165B:2019-10-02
General Requirements for Powered Drive Units (PDUs) in Aircraft Cargo Systems (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€118.00 -
SAE AIR 4487B:2019-10-02
Investigation of Silver-Plated Conductor Corrosion (Red Plague)
10/2/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AIR 6552/1:2019-10-02
Inline Optical Power Monitoring, Network End-to-End Data Link Evaluation System
10/2/2019 - PDF - English - SAE
Learn More€93.00 -
SAE AIR 81E:2019-10-02
Importance of Physical and Chemical Properties of Aircraft Hydraulic Fluids
10/2/2019 - PDF - English - SAE
Learn More€86.00 -
€98.00
-
SAE J 138:2019-10-02
Film Analysis Guides for Dynamic Studies of Test Subjects (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€60.00 -
SAE J 1663:2019-10-02
Truth-in-Labeling Standard for Navigation Map Databases (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€113.00 -
SAE J 2066:2019-10-02
Filter and Filter Element for Hydraulic System(s) Used on Manufacturing and Assembly Equipment (Stabilized: Oct 2019)
10/2/2019 - PDF - English - SAE
Learn More€96.00 -
€79.00
-
SAE J 931:2019-10-02
Hydraulic Fluid Power Circuit Filtration - Application and Methods
10/2/2019 - PDF - English - SAE
Learn More€60.00 -
SAE AMS 4095E:2019-10-01
Aluminum Alloy, Alclad Sheet and Plate 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti Alclad 2219-T31, Sheet, Solution Heat Treated and Cold Worked Alclad 2219-T351, Plate, Solution Heat Treated and Stress Relieved
10/1/2019 - PDF - English - SAE
Learn More€66.00 -
SAE AS 8040C:2019-10-01
Heater and Accessories, Aircraft Internal Combustion Heat Exchanger Type
10/1/2019 - PDF - English - SAE
Learn More€111.00 -
SAE J 1339:2019-09-30
Test Method for Measuring Performance of Engine Cooling Fans
9/30/2019 - PDF - English - SAE
Learn More€79.00 -
€47.00
-
€140.00
-
SAE AS 9308C:2019-09-25
STUD, SHOULDERED, HEX, WRENCHING, DRILLED, STEEL UNS G87400, CAD, PLATED, 125 KSI MIN, .1900-32 UNF-3A X .1900-32 UNF-3A
9/25/2019 - PDF - English - SAE
Learn More€54.00 -
SAE J 1774:2019-09-25
Design Guidelines for Fiberboard Materials (Stabilized: Sep 2019)
9/25/2019 - PDF - English - SAE
Learn More€79.00 -
SAE J 277:2019-09-25
Maintenance of Design Voltage - Snowmobile Electrical Systems
9/25/2019 - PDF - English - SAE
Learn More€54.00 -
SAE J 712:2019-09-25
Industrial and Agricultural Disc Wheels (Stabilized: Sep 2019)
9/25/2019 - PDF - English - SAE
Learn More€79.00 -
SAE J 902:2019-09-25
Passenger Vehicle Windshield Demisting and Defrosting Systems
9/25/2019 - PDF - English - SAE
Learn More€96.00 -
SAE AIR 1168/3A:2019-09-24
SAE Aerospace Applied Thermodynamics Manual Aerothermodynamic Systems Engineering and Design
9/24/2019 - PDF - English - SAE
Learn More€158.00 -
SAE AS 81714/65A:2019-09-24
TERMINAL JUNCTION SYSTEM, TERMINAL JUNCTION BLOCKS, SECTIONAL, WIRE IN-LINE JUNCTIONS, SERIES II
9/24/2019 - PDF - English - SAE
Learn More€47.00 -
SAE J 1451:2019-09-24
A Dictionary of Terms for the Dynamics and Handling of Single Track Vehicles (Motorcycles, Scooters, Mopeds, and Bicycles)
9/24/2019 - PDF - English - SAE
Learn More€130.00 -
€153.00
-
SAE AS 3178B:2019-09-20
BOLT, MACHINE - DOUBLE HEX EXTENDED WASHER HEAD, DRILLED, CLOSE TOL SHANK, AMS5643 (UNS S17400), 140 KSI, .4375-20 UNJF-3A
9/20/2019 - PDF - English - SAE
Learn More€47.00 -
SAE AS 9362B:2019-09-20
NUT, PLAIN, HEXAGON, CHECK - UNS S66286, 130 KSI MIN, SILVER PLATED
9/20/2019 - PDF - English - SAE
Learn More€47.00 -
€47.00
-
SAE AMS 4118M:2022-07-06
Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 4.0Cu - 0.70Mn - 0.60Mg - 0.50Si (2017, -T4, -T451) Solution Heat Treated
9/18/2019 - PDF - English - SAE
Learn More€60.00
