SAE ®

 

SAE International Standards are globally recognized standards for engineering professionals in the industries of aerospace, automotive, commercial vehicles and many more. Their main mission is to advance mobility knowledge and solutions for the benefit of humanity.

 

With SAE Standards, companies in these industries can improve and strengthen their competitiveness while optimizing their product cost and life-cycle. Being at the cutting edge of technology, they respond to the current challenges of these sectors with safe, clean and accessible mobility solutions.

 

They contain detailed production and interoperability guidelines; clarify legal and regulatory grey areas; condense product development cycles; ensure consistency and high quality in manufacturing; and lead the way to maximum performance.


Items 1 to 200 of 13352 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 67
  • SAE AS 22520/10A:2023-05-25

    CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COAXIAL, TWINAXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES AND END CAPS
    5/25/2023 - PDF - English - SAE
    Learn More
    €92.00

  • SAE AS 39029/44E:2023-05-25

    CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS)
    5/25/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AMS 2667H:2023-05-24

    Brazing, Silver, for Small Pressurized Fittings
    5/24/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE J 1979DA:2023-05-24

    J1979-DA, Digital Annex of E/E Diagnostic Test Modes
    5/24/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE J 2383:2023-05-24

    Air Dryer Installation Procedure
    5/24/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE J 2931/4:2023-05-24

    Broadband PLC Communication for Plug-in Electric Vehicles
    5/24/2023 - PDF - English - SAE
    Learn More
    €144.00

  • SAE J 2953/1:2023-05-24

    Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
    5/24/2023 - PDF - English - SAE
    Learn More
    €116.00

  • SAE AS 22520/5B:2023-05-23

    CRIMPING TOOLS, TYPE 2, TERMINAL, HAND, WIRE TERMINATION, FOR COXIAL, TWIN AXIAL, TRIAXIAL, SHIELDED CONTACTS AND FERRULES, TERMINAL LUGS, SPLICES, AND END CAPS
    5/23/2023 - PDF - English - SAE
    Learn More
    €104.00

  • SAE AIR 6977:2023-05-22

    Water Content Instrumentation for Icing Cloud Characterization
    5/22/2023 - PDF - English - SAE
    Learn More
    €134.00

  • SAE AMS 1525E:2023-05-22

    Cleaner for Aircraft Exterior Metallic Surfaces Wipe Solvent, Cold Operations (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 1541D:2023-05-22

    Cleaner, Fuel Drop Tank Water Soluble (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 2303G:2023-05-22

    Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure
    5/22/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AMS 3374G:2023-05-22

    Sealing Compound Aircraft Firewall, Silicone
    5/22/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 4991G:2023-05-22

    Titanium Alloy Castings, Investment 6Al - 4V Hot Isostatic Pressed, Anneal Optional
    5/22/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE AMS 5571K:2023-05-22

    Steel, Corrosion- and Heat-Resistant, Seamless Tubing 18Cr - 10.5Ni - 0.70Cb (Nb) (347) Solution Heat Treated
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 5596N:2023-05-22

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, Foil and Plate 52.5Ni - 19Cr - 3.0Mo - 5.1Cb (Nb) - 0.90Ti - 0.50Al - 18Fe Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated
    5/22/2023 - PDF - English - SAE
    Learn More
    €80.00

  • SAE AMS 5632K:2023-05-22

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, and Forging Stock, 17Cr - 0.50Mo (0.95 - 1.20C) (440F), Free-Machining, Annealed
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 5680K:2023-05-22

    Steel, Corrosion- and Heat-Resistant, Welding Wire 18.5Cr - 11Ni - 0.40Cb (Nb) (SAE 30347)
    5/22/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 6290L:2023-05-22

    Steel, Bars, Forgings, and Forging Stock, Carburizing 1.8Ni - 0.25Mo (0.11 - 0.17C) (SAE 4615)
    5/22/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS-G-952C:2023-05-22

    Guns, Spray, Oil and Solvent (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS-H-81829B:2023-05-22

    Heat Transfer Fluid, Fluorochemical (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AS 10051B:2023-05-22

    HUBS, CONDUIT CONNECTION, STANDARD DIMENSIONS (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AS 10380B:2023-05-22

    COUPLING INSTALLATIONS, STANDARD CONDUIT, ELECTRICAL (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AS 22520/48A:2023-05-22

    CRIMP TOOLS, TYPE 1, HAND OR POWER ACTUATED, WIRE TERMINATION, HYDRAULIC TOOL FOR WIRE BARREL SIZES 0000 THROUGH 8
    5/22/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AS 39029/103C:2023-05-22

    CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SRIES I, III, AND IV CONNECTORS)
    5/22/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 5725C:2023-05-22

    Interface Standard, Miniature Mission Store Interface
    5/22/2023 - PDF - English - SAE
    Learn More
    €135.00

  • SAE AS 6136B:2023-05-22

    Conduit, Electrical, Flexible, Shielded, Aluminum Alloy for Aircraft Installations (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AS 6285E:2023-05-22

    Aircraft Ground Deicing/Anti-Icing Processes
    5/22/2023 - PDF - English - SAE
    Learn More
    €133.00

  • SAE AS 7045:2023-05-22

    Residual Stress Measurement and Classification, Metallic Structural Alloy Products and Finished Parts
    5/22/2023 - PDF - English - SAE
    Learn More
    €94.00

  • SAE AS 95A:2023-05-22

    FITTING ASSEMBLY, CROSS, REDUCER AND NON-REDUCER, INTERNAL FLARE ON ONE END, TO FLARED TUBE
    5/22/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE J 2738:2023-05-22

    Improved Roadway Illumination: Information Resource
    5/22/2023 - PDF - English - SAE
    Learn More
    €128.00

  • SAE J 2862:2023-05-22

    User’s Manual for the Small Adult Female Hybrid III Test Dummy (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €142.00

  • SAE J 3187:2023-05-22

    System Theoretic Process Analysis (STPA) Recommended Practices for Evaluations of Safety-Critical Systems in Any Industry
    5/22/2023 - PDF - English - SAE
    Learn More
    €136.00

  • SAE J 3214:2023-05-22

    Breath-Based Alcohol Detection System
    5/22/2023 - PDF - English - SAE
    Learn More
    €106.00

  • SAE J 399:2023-05-22

    Anodized Aluminum Automotive Parts (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE J 423:2023-05-22

    Methods of Measuring Case Depth (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE J 474:2023-05-22

    Electroplating and Related Finishes (Stabilized: May 2023)
    5/22/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE J 1671:2023-05-19

    Outboard Mounted Brake Drum/Disc Wheel Hub Interface Dimensions - Truck and Bus
    5/19/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE J 2953/2:2023-05-19

    Test Procedures for the Plug-In Electric Vehicle (PEV) Interoperability with Electric Vehicle Supply Equipment (EVSE)
    5/19/2023 - PDF - English - SAE
    Learn More
    €127.00

  • SAE AMS 2615G:2023-05-17

    Pressure Testing, Hydraulic Pressure as Specified
    5/17/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 2665J:2023-05-17

    Brazing, Silver for Use up to 400 °F (204 °C)
    5/17/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 4111F:2023-05-17

    Aluminum Alloy Forgings 7.7Zn - 2.5Mg - 1.5Cu - 0.16Cr (7049-T73) Solution and Precipitation Heat Treated
    5/17/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE ARP 378E:2023-05-17

    Passenger Reading Lights (Stabilized: May 2023)
    5/17/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE ARP 6503A:2023-05-17

    Cabin Crew Rest Facilities (Stabilized: May 2023)
    5/17/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE AIR 7058:2023-05-10

    High-Voltage DC Electromechanical, Solid State, and Hybrid Switching Devices in Aerospace Applications
    5/10/2023 - PDF - English - SAE
    Learn More
    €105.00

  • SAE AIR 984D:2023-05-10

    Air Bleed Objective for Rotorcraft Turbine Engines
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 2222L:2023-05-10

    Tolerances Copper and Copper Alloy Sheet, Strip, and Plate
    5/10/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 3040E:2023-05-10

    Magnetic Particles, Nonfluorescent Dry Method
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 3043F:2023-05-10

    Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4071P:2023-05-10

    Aluminum Alloy, Drawn, Round, Seamless Hydraulic Tubing 2.5Mg - 0.25Cr (5052-O) Annealed
    5/10/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 4107H:2023-05-10

    Aluminum Alloy Die Forgings (7050-T74) Solution Heat Treated and Overaged
    5/10/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 4113G:2023-05-10

    Aluminum Alloy, Extruded Profiles 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T6) Solution and Precipitation Heat Treated
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 4245G:2023-05-10

    Aluminum Alloy, Welding Wire 5.0Si - 1.2Cu - 0.50Mg (C355.0)
    5/10/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AMS 4296D:2023-05-10

    Aluminum Alloy, Alclad Sheet and Plate 4.3Cu - 1.4Mg - 0.60Mn (Alclad 2524-T3) Solution Heat Treated and Cold Worked
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4477B:2023-05-10

    Aluminum Alloy, Coiled Sheet 4.4Cu - 1.5Mg - 0.60Mn (2024-T4) Solution Treated
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4599B:2023-05-10

    Aluminum Alloy, Sheet, and Plate 6.3Cu - 0.30Mn - 0.06Ti - 0.10V - 0.18Zr Solution and Precipitation Heat Treated (2219 -T81/-T851)
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4950F:2023-05-10

    Titanium Alloy, Bars, Wire, Forgings, and Rings 6.0Al - 4.0V Solution Heat Treated and Aged Modified Strength
    5/10/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 5540R:2023-05-10

    Nickel Alloy, Corrosion- and Heat-Resistant, Sheet, Strip, and Plate 74Ni - 15.5Cr - 8.0Fe Annealed
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5564D:2023-05-10

    Steel, Corrosion Resistant, Tubing 19Cr - 10Ni High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eighth - Hard Temper
    5/10/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 6544F:2023-05-10

    Steel, Plate 2.0Cr - 10Ni - 8.0Co - 1.0Mo (0.10 - 0.14C) (HY-180) Double Vacuum Melted, Solution Heat Treated
    5/10/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE ARP 6290:2023-05-10

    Guidelines for the Development of Architectures for Integrated Vehicle Health Management Systems
    5/10/2023 - PDF - English - SAE
    Learn More
    €142.00

  • SAE AS 3481K:2023-05-10

    NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, REDUCED RIVET SPACING, LOW HEIGHT, UNS S66286, CLASS: 125 KSI/800 °F
    5/10/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 39029/102B:2023-05-10

    CONTACTS, ELECTRICAL CONNECTOR, PIN, CRIMP REMOVABLE, COAXIAL, SIZE 12 (FOR MIL-DTL-38999 SERIES I, II, III, AND IV CONNECTORS)
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 39029/45E:2023-05-10

    CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR AS50151 SERIES AS34001 AND AS95234 CONNECTORS)
    5/10/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AS 4329A:2023-05-10

    CAP ASSEMBLY, PRESSURE SEAL, FLARED TUBE FITTING
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AS 8043C:2023-05-10

    Restraint Systems for Civil Aircraft
    5/10/2023 - PDF - English - SAE
    Learn More
    €104.00

  • SAE AS 861C:2023-05-10

    Minimum General Standards for Oxygen Systems
    5/10/2023 - PDF - English - SAE
    Learn More
    €92.00

  • SAE AS 9212D:2023-05-10

    BOLT, MACHINE - STEEL, DIFFUSED NICKEL-CADMIUM PLATED, DOUBLE HEXAGON EXTENDED WASHER-HEAD, UNS K14675, 195 KSI MIN, .4375-20 UNJF-3A
    5/10/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 9576E:2023-05-10

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .3125-24 UNJF-3A
    5/10/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 9596C:2023-05-10

    BRACKET, ANGLE, 90°, CADMIUM PLATED, STEEL UNS G41300, .190 BOLT
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AS 9734C:2023-05-10

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, CRES AMS5643, .3125-24 UNJF-3A
    5/10/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE J 1082:2023-05-10

    Fuel Economy Measurement Road Test Procedure (Stabilized: May 2023)
    5/10/2023 - PDF - English - SAE
    Learn More
    €110.00

  • SAE J 1405:2023-05-10

    Optional Test Procedures for Hydraulic Hose Assemblies
    5/10/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE J 1926/3:2023-05-10

    Connections for General Use and Fluid Power Ports and Stud Ends with ASME B1.1 Threads and O-Ring Sealing Part 3: Light-Duty (L-Series) Stud Ends
    5/10/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE J 1939DA:2023-05-10

    J1939 Digital Annex
    5/10/2023 - PDF - English - SAE
    Learn More
    €257.00

  • SAE J 2284/1:2023-05-10

    High-Speed CAN (HSC) for Vehicle Applications at 125 kbps (Stabilized: May 2023)
    5/10/2023 - PDF - English - SAE
    Learn More
    €123.00

  • SAE J 2284/2:2023-05-10

    High-Speed CAN (HSC) for Vehicle Applications at 250 kbps (Stabilized: May 2023)
    5/10/2023 - PDF - English - SAE
    Learn More
    €123.00

  • SAE J 2429:2023-05-10

    Free-Rolling Cornering Test for Truck and Bus Tires
    5/10/2023 - PDF - English - SAE
    Learn More
    €114.00

  • SAE J 2643:2023-05-10

    Standard Reference Elastomers (SREs) for Characterizing the Effect of Liquids on Vulcanized Rubbers
    5/10/2023 - PDF - English - SAE
    Learn More
    €99.00

  • SAE J 2927:2023-05-10

    Integrated R-1234yf Refrigerant Identifier for Recovery and Recycling Equipment Used in Mobile A/C System Servicing
    5/10/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE J 3063:2023-05-10

    Active Safety Systems Terms and Definitions
    5/10/2023 - PDF - English - SAE
    Learn More
    €94.00

  • SAE J 3095:2023-05-10

    Linear Impactor Calibration Procedure
    5/10/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE J 3281:2023-05-10

    Desorption of Brake Friction Materials
    5/10/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE J 948:2023-05-10

    Test Method for Determining Resistance to Abrasion of Automotive Bodycloth, Vinyl, and Leather, and the Snagging of Automotive Bodycloth
    5/10/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE J 3105/1:2023-05-05

    Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Infrastructure-Mounted Pantograph (Cross-Rail) Connection
    5/5/2023 - PDF - English - SAE
    Learn More
    €99.00

  • SAE J 3105/2:2023-05-05

    Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices Vehicle-Mounted Pantograph (Bus-Up)
    5/5/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE J 3105:2023-05-05

    Electric Vehicle Power Transfer System Using Conductive Automated Connection Devices
    5/5/2023 - PDF - English - SAE
    Learn More
    €154.00

  • SAE AIR 1390B:2023-05-01

    Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft (Stabilized: May 2023)
    5/1/2023 - PDF - English - SAE
    Learn More
    €104.00

  • SAE AMS 3196H:2023-05-01

    Sponge, Silicone Rubber Closed Cell, Firm
    5/1/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 6308G:2023-05-01

    Steel, Bars, and Forgings and Forging Stock 0.90Si - 1.0Cr - 2.0Ni - 3.2Mo - 2.0Cu - 0.10V (0.07 - 0.13C) Vacuum Arc or Electroslag Remelted
    5/1/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 6408F:2023-05-01

    Steel, Hotwork Tool, Bars, and Forgings and Forging Stock 5.25Cr - 1.5Mo - 1.0V (0.35-0.45C) (H-13) Electroslag Remelted (ESR) or Consumable Electrode Vacuum Arc Remelted (VAR) Annealed
    5/1/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 6463G:2023-05-01

    Wire, Steel Welding 18.5Ni - 8.5Co - 5.2Mo - 0.72Ti - 0.10Al (Marage 300) Vacuum Melted, Environment Controlled Packaging
    5/1/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 6527G:2023-05-01

    Steel, Bars, Forgings, and Forging Stock 2.0Cr - 10Ni - 14Co - 1.0Mo (0.15 - 0.19C) Vacuum Melted, Normalized and Overaged
    5/1/2023 - PDF - English - SAE
    Learn More
    €80.00

  • SAE ARP 1833C:2023-05-01

    Sealing Techniques for Missile Applications
    5/1/2023 - PDF - English - SAE
    Learn More
    €142.00

  • SAE ARP 6412:2023-05-01

    Recommended Practice for Landing Gear Integrity Programs
    5/1/2023 - PDF - English - SAE
    Learn More
    €121.00

  • SAE ARP 7120:2023-05-01

    Compatibility of Turbine Lubricating Oils
    5/1/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE ARP 741D:2023-05-01

    Turbofan and Turbojet Gas Turbine Engine Test Cell Correlation
    5/1/2023 - PDF - English - SAE
    Learn More
    €108.00

  • SAE AS 5756/1B:2023-05-01

    CABLE, POWER, ELECTRICAL, 600 VOLTS, PORTABLE, SINGLE CONDUCTOR, NON-OZONE RESISTANT
    5/1/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE J 1340:2023-05-01

    Test Method for Measuring Power Consumption of Air Conditioning and Brake Compressors for Trucks and Buses (Stabilized: May 2023)
    5/1/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE J 1341:2023-05-01

    Test Method for Measuring Power Consumption of Hydraulic Pumps for Trucks and Buses (Stabilized: May 2023)
    5/1/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE J 1681:2023-05-01

    Gasoline, Alcohol, and Diesel Fuel Surrogates for Materials Testing
    5/1/2023 - PDF - English - SAE
    Learn More
    €97.00

  • SAE J 2858:2023-05-01

    Hybrid III Ten-Year Old Child Dummy User’s Manual (Stabilized: May 2023)
    5/1/2023 - PDF - English - SAE
    Learn More
    €133.00

  • SAE J 2970:2023-05-01

    Minimum Performance Requirements for Non-Refrigerant Tracer Gases and Electronic Tracer Gas Leak Detectors
    5/1/2023 - PDF - English - SAE
    Learn More
    €92.00

  • SAE J 814:2023-05-01

    Coolants for Internal Combustion Engines
    5/1/2023 - PDF - English - SAE
    Learn More
    €106.00

  • SAE AS 172201B:2023-04-21

    WASHER, KEY - SINGLE, BEARING RETAINING, AMS6350 (UNS G41300)
    4/21/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE AS 3243E:2023-04-21

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI UTS MIN, .1900-32 UNJF-3A
    4/21/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE AS 6081A:2023-04-21

    Counterfeit Electrical, Electronic, and Electromechanical (EEE) Parts: Avoidance, Detection, Mitigation, and Disposition - Independent Distribution
    4/21/2023 - PDF - English - SAE
    Learn More
    €113.00

  • SAE AS 9557F:2023-04-21

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, UTS 130 KSI MIN, .2500-28 UNJF-3A
    4/21/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 9573D:2023-04-21

    SCREW, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, DRILLED, PD SHANK, SILVER PLATED, CORROSION AND HEAT RESISTANT STEEL, UNS S66286, 130 KSI MIN, .1640-36 UNJF-3A
    4/21/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE AS 9685D:2023-04-21

    BOLT, MACHINE - HEXAGON HEAD, DRILLED, 1 HOLE, PD SHANK, STEEL, UNS K14675, DIFFUSED NICKEL-CADMIUM PLATE, 195 KSI MIN, .1900-32 UNJF-3A
    4/21/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE AS 9895C:2023-04-21

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, DRILLED, CORROSION RESISANT STEEL (UNS S41800), .2500-28 UNJF-3A
    4/21/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE J 1626/2:2023-04-21

    Recommended Practice for Braking, Stability, and Control Performance Test Procedure for Air-Brake-Equipped Trucks and Buses
    4/21/2023 - PDF - English - SAE
    Learn More
    €111.00

  • SAE J 2725:2023-04-21

    Road Vehicles - Friction Materials - Elastic Properties Measurements
    4/21/2023 - PDF - English - SAE
    Learn More
    €117.00

  • SAE J 2886:2023-04-21

    Design Review Based on Failure Modes (DRBFM)
    4/21/2023 - PDF - English - SAE
    Learn More
    €113.00

  • SAE AMS 3213N:2023-04-12

    Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75 - 85 (Stabilized: Apr 2023)
    4/12/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS-P-5510B:2023-04-12

    O-Ring, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 to 160 °F) (Stabilized: Apr 2023)
    4/12/2023 - PDF - English - SAE
    Learn More
    €80.00

  • SAE ARP 1256E:2023-04-12

    Procedure for the Continuous Sampling and Measurement of Gaseous Emissions from Aircraft Turbine Engines
    4/12/2023 - PDF - English - SAE
    Learn More
    €106.00

  • SAE J 2536:2023-04-12

    Anti-Lock Brake System (ABS) Road Test Evaluation Procedure for Trucks, Truck-Tractors, and Buses
    4/12/2023 - PDF - English - SAE
    Learn More
    €83.00

  • SAE J 2789:2023-04-12

    Inertia Calculation for Single-Ended Inertia-Dynamometer Testing (Stabilized: Apr 2023)
    4/12/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AIR 8035:2023-04-04

    Fuel Flow Rates for Jet-Powered Commercial Aircraft Taxi Operations
    4/4/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 2431E:2023-04-04

    Peening Media, General Requirements
    4/4/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 5441C:2023-04-04

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, and Rings Ni - 18Cr - 2.8Mo - 5.5Cb (Nb) - 0.70Ti - 1.50Al - 10Fe - 9Co - 1W Consumable Electrode Remelted or Vacuum Induction Melted 1775 °F (968 °C) Solution Heat Treated, Precipitation-Hardenable
    4/4/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE ARP 6205:2023-04-04

    Transport Airplane Fuel System Lightning Protection
    4/4/2023 - PDF - English - SAE
    Learn More
    €152.00

  • SAE AS 1390A:2023-04-04

    Level of Repair Analysis (LORA)
    4/4/2023 - PDF - English - SAE
    Learn More
    €137.00

  • SAE AS 4405B:2023-04-04

    FITTING ASSEMBLY, ADAPTER, REDUCER AND NONREDUCER, INTERNAL FLARE TO FLARED TUBE
    4/4/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 4406B:2023-04-04

    FITTING ASSEMBLY, UNION, REDUCER AND NONREDUCER, INTERNAL FLARE
    4/4/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 81044/11B:2023-04-04

    WIRE, ELECTRIC, CROSSLINKED POLYALKENE INSULATED, SILVER-COATED COPPER, LIGHT WEIGHT, 600-VOLT, 150 °C (Stabilized: Apr 2023)
    4/4/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE J 1113/1:2023-04-04

    Electromagnetic Compatibility Measurement Procedures and Limits for Components of Vehicles, Boats (up to 15 m), and Machines (Except Aircraft) (16.6 Hz to 18 GHz)
    4/4/2023 - PDF - English - SAE
    Learn More
    €124.00

  • SAE J 2473:2023-04-04

    Self-Propelled Sweepers and Scrubbers - Maximum Gradient Rating During Hopper Discharge
    4/4/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE J 2796:2023-04-04

    Power Cylinder Oil Consumption: Methods of Measurements
    4/4/2023 - PDF - English - SAE
    Learn More
    €99.00

  • SAE J 577:2023-04-04

    Vibration Test Machine and Operation Procedure
    4/4/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE J 585:2023-04-04

    Tail Lamp (Rear Position Lamp) for Use on Motor Vehicles Less than, Equal to, or Greater than 2032 mm in Overall Width
    4/4/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE AS 6286C:2023-03-31

    Aircraft Ground Deicing/Anti-Icing Training and Qualification Program
    3/31/2023 - PDF - English - SAE
    Learn More
    €150.00

  • SAE AMS 4937F:2023-03-23

    Titanium Alloy, Extrusions and Flash Welded Rings 6Al - 6V - 2Sn Beta Extruded Plus Annealed, Heat Treatable (Stabilized: Mar 2023)
    3/23/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 5629/H 1000B:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1000)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5629/H 1025:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1025)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5629/H 1050:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1050)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5629/H 1100:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1100)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5629/H 1150:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1150)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5629/H 950:2023-03-23

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H950)
    3/23/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5707P:2023-03-23

    Nickel Alloy, Corrosion- and Heat-Resistant, Bars, Forgings, Rings, and Forging Stock 57Ni - 19.5Cr - 13.5Co - 4.3Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode Remelted or Vacuum Induction Melted 1825 to 1900 °F (996 to 1038 °C) Solution, Stabilization, and Precipitation Heat Treated
    3/23/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 6303K:2023-03-23

    Steel Bars, Forgings and Forging Stock, Low Alloy, Heat-Resistant 0.65Si - 1.25Cr - 0.50Mo - 0.85V (0.25 - 0.30C)
    3/23/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 6352M:2023-03-23

    Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.33 - 0.38C) (SAE 4135)
    3/23/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE ARP 7998:2023-03-23

    Shared Memory Interface for Gas Turbine Engine Performance Programs
    3/23/2023 - PDF - English - SAE
    Learn More
    €120.00

  • SAE AS 85421/11D:2023-03-23

    FITTING, UNION, BEAM SEAL, 3000/4000 PSI, MALE ENDS
    3/23/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 85421/6B:2023-03-23

    FITTING, CROSS, BEAM SEAL, 3000/4000 PSI, MALE ENDS
    3/23/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 85421/7B:2023-03-23

    FITTING ASSEMBLY, CROSS, BEAM SEAL, 3000/4000 PSI, FOUR FEMALE ENDS
    3/23/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 85421/8B:2023-03-23

    FITTING, CROSS, REDUCER BEAM SEAL, 3000/4000 PSI, FOUR MALE ENDS
    3/23/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE J 1113/27:2023-03-23

    Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27: Immunity to Radiated Electromagnetic Fields - Mode Stir Reverberation Method (Stabilized: Mar 2023)
    3/23/2023 - PDF - English - SAE
    Learn More
    €116.00

  • SAE J 1626/1:2023-03-23

    Recommended Practice for Braking, Stability, and Control Performance Test Procedure for Air Brake-Equipped Truck-Tractors
    3/23/2023 - PDF - English - SAE
    Learn More
    €105.00

  • SAE J 1982:2023-03-23

    Nomenclature - Wheels for Passenger Cars, Light Trucks, and Multipurpose Vehicles
    3/23/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE J 200:2023-03-23

    Classification System for Rubber Materials
    3/23/2023 - PDF - English - SAE
    Learn More
    €138.00

  • SAE J 2034:2023-03-23

    Personal Watercraft Ventilation Systems
    3/23/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE J 3186:2023-03-23

    Application Protocol and Requirements for Maneuver Sharing and Coordinating Service
    3/23/2023 - PDF - English - SAE
    Learn More
    €139.00

  • SAE J 846:2023-03-23

    Coding Systems for Identification of Fluid Conductors and Connectors
    3/23/2023 - PDF - English - SAE
    Learn More
    €119.00

  • SAE/USCAR-44-2:2023-03-23

    PERFORMANCE SPECIFICATION FOR AUTOMOTIVE WIRE HARNESS RETAINER CLIPS
    3/23/2023 - PDF - English - SAE
    Learn More
    €127.00

  • SAE/USCAR-46:2023-03-23

    ENGINE OIL PUMP PERFORMANCE AND DURABILITY TEST PROCEDURES
    3/23/2023 - PDF - English - SAE
    Learn More
    €132.00

  • SAE AMS 3353A:2023-03-20

    Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 °F (-40 °C) / 70 to 80 Hardness, for Products in Aircraft Engine Oil, Fuel, and Hydraulics Systems
    3/20/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 4478B:2023-03-20

    Aluminum Alloy, Sheet and Plate, Alclad 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged
    3/20/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4902M:2023-03-20

    Titanium Sheet, Strip, and Plate Commercially Pure Annealed 40.0 ksi (276 MPa) Yield Strength
    3/20/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 4918R:2023-03-20

    Titanium Alloy, Sheet, Strip, and Plate 6Al - 6V - 2Sn Annealed
    3/20/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 5120P:2023-03-20

    Steel Strip 0.68 - 0.80C (SAE 1074)
    3/20/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AMS 5620J:2023-03-20

    Steel, Corrosion- and Heat-Resistant, Bars, Wire, Forgings, and Forging Stock 13Cr (0.30 - 0.40C) (420F, 420FSe) Free-Machining Grade, Annealed
    3/20/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE AMS 5726F:2023-03-20

    Steel, Corrosion- and Heat-Resistant, Bars and Wire 15Cr - 25.5Ni - 1.2Mo - 2.1Ti - 0.006B - 0.30V 1800 °F (982 °C) Solution Heat Treated and Work-Strengthened Consumable Electrode Remelted 200 ksi (1379 MPa) Tensile Strength Capability
    3/20/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 5749G:2023-03-20

    Steel, Corrosion-Resistant, Bars, Wire, Forgings, Forging Stock and Mechanical Tubing 14.5Cr - 4.0Mo - 1.2V (1.10-1.20C) Premium Quality for Bearing Applications, Double Vacuum Melted
    3/20/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 6302L:2023-03-20

    Low-Alloy Steel, Heat-Resistant, Bars, Forgings, Mechanical Tubing and Forging Stock 0.65Si - 1.25Cr - 0.50Mo - 0.25V (0.28 - 0.33C)
    3/20/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE AMS 6511C:2023-03-20

    Steel, Maraging, Bars, Forgings, Mechanical Tubing, Rings, and Stock for Forging and Rings 18Ni - 8.5Co - 3.2Mo - 0.20Ti - 0.10Al Double Vacuum Melted, Annealed
    3/20/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE ARP 5889A:2023-03-20

    Alternative (Ecological) Method for Measuring Electronic Product Immunity to External Electromagnetic Fields (Stabilized: Mar 2023)
    3/20/2023 - PDF - English - SAE
    Learn More
    €108.00

  • SAE AS 24585E:2023-03-20

    SPRING, HELICAL, COMPRESSION: FOR LOADS BELOW 20 LBF
    3/20/2023 - PDF - English - SAE
    Learn More
    €89.00

  • SAE AS 3242E:2023-03-20

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, NICKEL ALLOY, UNS N07718, 185 KSI MIN, .5625-18 UNJF-3A
    3/20/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 39029/94C:2023-03-20

    CONTACTS, ELECTRICAL CONNECTOR, SOCKET, CRIMP REMOVABLE (FOR MIL-DTL-83527 CONNECTORS)
    3/20/2023 - PDF - English - SAE
    Learn More
    €46.00

  • SAE AS 4408C:2023-03-20

    FITTING ASSEMBLY, ELBOW 90°, REDUCER AND NONREDUCER, INTERNAL FLARE
    3/20/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AS 4410C:2023-03-20

    FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON RUN TO FLARED TUBE
    3/20/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 4411C:2023-03-20

    FITTING ASSEMBLY, TEE, REDUCER AND NONREDUCER, INTERNAL FLARE ON SIDE TO FLARED TUBE
    3/20/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AS 90708C:2023-03-20

    RING, RETAINING, EXTERNAL, INTERLOCKING
    3/20/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AS 954H:2023-03-20

    Wrenches, Hand, Twelve Point, High Strength, Thin Wall
    3/20/2023 - PDF - English - SAE
    Learn More
    €135.00

  • SAE AS 9705E:2023-03-20

    BOLT, MACHINE-DOUBLE HEXAGON, EXTENDED WASHER HEAD, PD SHANK, DRILLED, NICKEL ALLOY (UNS N07001), .1900-32 UNJF-3A
    3/20/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE AS 9732C:2023-03-20

    BOLT, MACHINE - DOUBLE HEXAGON EXTENDED WASHER HEAD, PD SHANK, UNS S17400, .1900-32 UNJF-3A
    3/20/2023 - PDF - English - SAE
    Learn More
    €38.00

  • SAE J 1113/11:2023-03-20

    Immunity to Conducted Transients on Power Leads (Stabilized: Mar 2023)
    3/20/2023 - PDF - English - SAE
    Learn More
    €116.00

  • SAE J 3074:2023-03-20

    Lumbar Flexion Test Procedure for the Hybrid III 50th Male Dummy
    3/20/2023 - PDF - English - SAE
    Learn More
    €72.00

  • SAE J 3235:2023-03-20

    Best Practices for Storage of Lithium-Ion Batteries
    3/20/2023 - PDF - English - SAE
    Learn More
    €101.00

  • SAE J 2812:2023-03-14

    Road Load Tire Model Validation Procedures for Dynamic Behavior
    3/14/2023 - PDF - English - SAE
    Learn More
    €92.00

  • SAE JA 6268:2023-03-14

    Design & Run-Time Information Exchange for Health-Ready Components
    3/14/2023 - PDF - English - SAE
    Learn More
    €146.00

  • SAE AMS 2772H:2023-03-08

    Heat Treatment of Aluminum Alloy Raw Materials
    3/8/2023 - PDF - English - SAE
    Learn More
    €114.00

  • SAE AMS 4305A:2023-03-08

    Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated, Stress Relieved, and Overaged
    3/8/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE AMS 4368A:2023-03-08

    Aluminum Alloy, Discontinuously Reinforced Hot Isostatically Pressed Shapes 6061B/SiC/40p (3 µm) (T1P)
    3/8/2023 - PDF - English - SAE
    Learn More
    €63.00

  • SAE AMS 4633C:2023-03-08

    Bronze, Aluminum Silicon, Rods, Bars, and Forgings 90Cu - 7.0Al - 1.8Si Drawn and Stress Relieved (HR50)
    3/8/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE ARP 5297C:2023-03-08

    Recommended Qualification Tests for Halogen Miniature Lamps Less Than 35 Watts for Aircraft Applications (Stabilized: Mar 2023)
    3/8/2023 - PDF - English - SAE
    Learn More
    €80.00

  • SAE ARP 6225B:2023-03-08

    Aircraft Tire Inspection - In-Service Removal Criteria
    3/8/2023 - PDF - English - SAE
    Learn More
    €110.00

  • SAE ARP 7519:2023-03-08

    Potential Usage of Life Test Samples for Flight
    3/8/2023 - PDF - English - SAE
    Learn More
    €57.00

  • SAE AS 24464C:2023-03-08

    BEARING, ROLLER, NEEDLE-DOUBLE ROW, HEAVY DUTY, SELF-ALIGNING, TYPE IV, ANTIFRACTION, INCH
    3/8/2023 - PDF - English - SAE
    Learn More
    €51.00

  • SAE AS 7217:2023-03-08

    O-RINGS MOLDED FROM AMS7361 ETHYLENE PROPYLENE RUBBER FOR STATIC APPLICATIONS
    3/8/2023 - PDF - English - SAE
    Learn More
    €86.00

  • SAE J 1078:2023-03-08

    A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms (Stabilized: Mar 2023)
    3/8/2023 - PDF - English - SAE
    Learn More
    €127.00

  • SAE J 2859:2023-03-08

    Hybrid III Large Male Drawing Package (Stabilized: Mar 2023)
    3/8/2023 - PDF - English - SAE
    Learn More
    €92.00

  • SAE J 2921:2023-03-08

    H-III5F Chest Jacket Harmonization (Stabilized: Mar 2023)
    3/8/2023 - PDF - English - SAE
    Learn More
    €104.00

  • SAE J 304:2023-03-08

    Engine Oil Tests
    3/8/2023 - PDF - English - SAE
    Learn More
    €76.00

  • SAE J 3215:2023-03-08

    Hydrogen Embrittlement Testing of Ultra High Strength Steels and Stampings by Acid Immersion
    3/8/2023 - PDF - English - SAE
    Learn More
    €67.00

  • SAE J 3234/2:2023-03-08

    Active Safety Roadside Concrete Divider Surrogate Recommendation
    3/8/2023 - PDF - English - SAE
    Learn More
    €114.00

  • SAE AMS 4905G:2023-03-01

    Titanium Alloy, Damage-Tolerant Grade Plate 6Al - 4V, Extra Low Interstitial (ELI) Beta Annealed
    3/1/2023 - PDF - English - SAE
    Learn More
    €80.00

  • SAE AMS 4940D:2023-03-01

    Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 25.0 ksi (172 MPa) Yield Strength
    3/1/2023 - PDF - English - SAE
    Learn More
    €67.00

Items 1 to 200 of 13352 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 67