GM

194 Item(s)

Set Ascending Direction
per page

List  Grid 

  • GMW 14797:2020

    Painted Plastic Parts Performance Requirements
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15283:2020

    Cycle - Immersion Corrosion Test for Stainless Steel Molding Materials
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15289:2020

    Test Procedure for Determination of the Drip Performance of Hot Melt Wax
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15726:2020

    Coating Thickness Measurements for Weatherstrips
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW15788:2020

    U-Joint Accelerated Durability Test
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW16003:2020

    Direct Tire Pressure Monitoring System Test
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW16881:2020

    Brake Fluid Reservoir
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 17343:2020

    Part Performance of Jounce Bumper of Polyurethane Elastomer with Cellular Structure
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17395:2020

    DEXRON Low Viscosity Gear Oil 75W - 85
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17406:2020

    Chrome Plated Plastic Parts Process Requirements
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW17652:2020

    Turbocharger Shaft Motion Test Procedure (Vendor Version)
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 17733:2020

    Cycle Fatigue Test
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 18258:2020

    Specification for Fuel System – Fuel Tank Isolation Valve
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 3086:2020

    Plastic Fuel Tank
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3122:2020

    Dual Wire Controller Area Network (DWCAN) Physical Layer and Data Link Layer Specification
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3241:2020

    Durability Event: Driveway Ramps
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 15065:2020

    Polyurethane Foam for Back Foaming
    5/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW18025:2020

    Seat Heater Mat
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW18238:2020

    General Specification for Coolant System Leak Evaluation
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW18239:2020

    General Specification for Seal Integrity
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 15730:2020

    Hot Weather Exposure Test
    5/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 16436:2020

    Dendrite Arm Spacing Measurement of Aluminum Castings
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW17359:2020

    CompTire Force and Moment Test
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW17407:2020

    Vehicle Exterior Painted Plastic Add-On Parts Process Requirements
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 18292:2020

    Adhesive, Hot Melt, Weatherstrip Sealer
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3038:2020

    Polyamide 66 - Glass Fiber Reinforced, Heat Stabilized
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15571:2020

    Standard Requirements - Plastics
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15835:2020

    Rear Wiper System
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15890:2020

    Polypropylene - Long Glass Fiber Reinforced, Heat Stabilized
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16137:2020

    Wiper Blade Wind Lift Performance Test
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16317:2020

    Bloom Tests for Elastomeric Parts
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW16336:2020

    Polyolefin Alloy - 20% Mineral Filled, 1800 MPa Flexural Modulus
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW16448:2020

    Ventilation Icing Test – Highway Procedure for Climatic Wind Tunne
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW16557:2020

    Polyamide 66 and Polyphenylene Ether (PA66+PPE) - Impact Modified, Heat Stabilized, Conductive
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW14988:2020

    Front and Rear Brake Corner/Knuckle Fatigue Under Braking Loads
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 15340:2020

    Polyolefin Alloy - Talc Filled, Heat Stabilized, High Stiffness, High Impact, Interior Thermoplastic Olefin
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW14206:2020

    Seat-to-Ground Natural Frequency Evaluation Procedure
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14207:2020

    Steering Wheel – Flexural Modes Evaluation Procedure
    4/1/2020 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14334:2020

    Chemical Resistance to Fluids
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15379:2020

    Freeze Characteristics of Weatherstrips
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16121:2020

    Polyether Ether Ketone
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16196:2020

    Glass Fiber Reinforced, Heat Stabilized, Weatherable, Blow Moldable Grade
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16600:2020

    Susceptibility to Chloride Stress Corrosion Cracking
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16680:2020

    Sealers, Paint Shop, Pumpable, for Waterborne/2K, 3-Wet, Non-Compressed, Compact Painting Process, Generic Qualification
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16874:2020

    PBT+PET - Glass Fiber/Mineral Reinforced, Weatherable, Heat Stabilized
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17213:2020

    Washer Reservoir Level Sensor Component Specification
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17258:2020

    Polypropylene Homopolymer - General Purpose, Heat Stabilized
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17862:2020

    Material Specification for Transmission Venting Hoses Single and Double Layered
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 8693:2020

    Polyamide 66 - Mineral Filled, Heat Stabilized
    4/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3232:2020

    TEST METHOD FOR DETERMINING THE FLAMMABILITY OF INTERIOR TRIM MATERIALS * INCLUDES: CG4632
    3/1/2020 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17062:2019

    Polyamide 66 - 100% Post-Consumer Recycled Carpet Fiber, Mineral Filled/Glass Fiber Reinforced, Heat Stabilized


    9/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17077:2019

    Rear Window and Quarter Window Vehicle Defrost Test Procedure
    9/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15964:2019

    Qualifying Transmission and Engine Oil Hose Coupling Assemblies


    9/1/2019 - PDF - English - GM
    Learn More
    €62.04

  • GM 1738:2019

    Packaging Standards & Requirements
    8/1/2019 - PDF - English - GM
    Learn More
    €25.00

  • GMW 3010:2019

    Determination of Tensile and Elongation Properties
    7/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16331:2019

    Identification and Branding Requirements on GM Parts
    7/1/2019 - PDF sécurisé - English - GM
    Learn More
    €62.04

  • GMW 14095

    STEERING WHEEL ASSEMBLY - REQUIREMENTS
    6/1/2019 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14011 :2019

    Objective Subsystem/Component Squeak and Rattle Test
    4/1/2019 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 3161:2019

    Stainless Steel for Exhaust Applications
    3/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3191:2019

    Connector test and validation specification
    3/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3091:2019

    General Specification for Vehicles, Electromagnetic Compatibility
    3/1/2019 - PDF - English - GM
    Learn More
    €62.04

  • GMW 3097:2019

    General Specification for Electrical/Electronic Components and Subsystems, Electromagnetic Compatibility
    3/1/2019 - PDF - English - GM
    Learn More
    €62.04

  • GMW 3359:2019

    Non-Electrolytically Applied Zinc Rich Coating
    2/1/2019 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 14833:2019

    Speaker Performance Test Specification
    2/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14665:2019

    Anodic Oxidation Coating on Aluminum


    2/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15745:2019

    GM Dimensional Engineering Supplier Minimum Requirements


    1/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14638:2019

    Thermoplastic Fuel Tubing
    1/1/2019 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17560:2018

    Procedure for Qualifying Nylon Hose Coupling
    11/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14872:2018

    Cyclic Corrosion Laboratory Test
    10/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15812:2018

    Thermoplastic Elastomers – Polyolefinic, Fully Crosslinked, Heat Stabilized, Weatherable


    8/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15272:2018

    Corrosion performance specification
    8/1/2018 - PDF - English - GM
    Learn More
    €62.04

  • GMW16443-2018

    Adhesion Performance Requirements for Adhesive Backed Light Trim and Foam
    8/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14093:2018

    Determination of Impact Resistance of Plastic Components
    7/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16812:2018

    Global Dimensioning and Tolerancing Addendum
    6/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3172:2018

    GENERAL SPECIFICATION FOR ELECTRICAL/ELECTRONIC COMPONENTS - ENVIRONMENTAL/DURABILITY * INCLUDES CG3043 **GMW RES/CONF STD-CONTSALES- US CUST CALL 1-800-854-7179/NON-US SELECT WW OFFICES LINK TO FIND OFFICE TO CONT** HAS COLOR* MUST FILL OUT GMW AUTH FORM
    4/1/2018 - PDF - English - GM
    Learn More
    €62.04

  • GMW 17568:2018

    Procedure for Qualifying Liquid Fuel Quick Connect Fittings for Nylon Fuel Line, PTFE Hose, and Elastomeric Hose Usage


    4/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15760:2018

    Sample Selection Guideline for Design and Product Validation


    4/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14839:2018

    Diesel Fuel Filter Water Separator Assembly
    4/1/2018 - PDF - English - GM
    Learn More
    €62.04

  • GMW 3059:2018

    RESTRICTED AND REPORTABLE SUBSTANCES *** INCLUDES CG4110 ***
    3/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16530:2018

    Summary Document for GM Global Propulsion Systems (GPS) Requirements
    2/1/2018 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3013:2017

    General Requirements for Certification Testing and Approval of Plastic Materials


    12/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14444-2017

    Materials Related Interior Part Performance
    12/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW14292-2017

    Determination of Deposits in the Fuel System
    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW2

    Low Carbon Sheet Steel
    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 25

    Mechanical Properties and Material Requirements for Externally Threaded Fasteners
    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16704:2017

    Specification and verification of tensile and fatigue properties in metallic components
    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16705:2017

    Test methods for tensile and fatigue properties in metallic components
    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14754:2017

    O-Rings for Quick Connector Fittings for Fuel Systems


    11/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3044:2017

    Zinc-plating
    10/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15282:2017

    Corrosion/Undercutting Scribe Creepback


    10/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15920:2017

    Record Management for Suppliers
    8/1/2017 - PDF sécurisé - English - GM
    Learn More
    €62.04

  • GMW 14914:2017

    Test Fluids for Fuel Resistant Testing


    8/1/2017 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14124

    Automotive Environmental cycles
    8/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16037:2017

    Test method to quantify cleanliness of powertrain components
    7/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16676:2017

    Surface Roughness (Drawing Entry, Measuring Conditions, Profile Filters, Parameters)
    6/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14573:2017

    Global performance requirements for labels
    6/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14117:2014

    Instrument Panel Trim Technical Specification
    6/1/2017 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14829:2017

    Tape Adhesion Test for Paint Finishes
    6/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3420:2017

    Ethylene Glycol Based Extended Life Automotive Coolant DEX-COOL
    6/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14909:2017

    Wheel radial fatigue test
    3/1/2017 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14364-2017

    Ingress/Egress/Jounce Seat Durability Test
    1/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16606-2017

    Polypropylene Homopolymer, 32% Mineral/Glass Reinforced
    1/1/2017 - PDF - English - GM
    Learn More
    €33.84

  • GMW 4090:2016

    Yarn Count
    12/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14248:2016

    Constant Amplitude Durability of Suspension Stabilizer Bars
    12/1/2016 - PDF - English - GM
    Learn More
    €62.04

  • GMW 15932:2016

    Epoxy/Epoxide-Carbon Fiber Reinforced Unidirectional Composite Material


    12/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14162-2016

    Test Method for Determination of Colour Fastness to Artificial Light
    11/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3286-2016

    Neutral Salt Spray (NSS) Test
    10/1/2016 - PDF - English, German - GM
    Learn More
    €33.84

  • GMW 3182:2016

    Determination of Mass per Area
    10/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3262

    Finished genuine leather
    10/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 5:2016

    Cast aluminum Alloys
    10/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW14327

    Braided Monofilament Sleeving for Abrasion Resistant Applocations
    10/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14145:2016

    Seam Strength
    10/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3259 (2011)

    Mildew Resistance
    9/1/2016 - PDF - English - GM
    Learn More
    €35.25

  • GMW 16503:2016

    Windshield Washer Elastomer Tubing
    9/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3235 (2011)

    Fogging Characteristics of Trim Materials
    8/1/2016 - PDF - English - GM
    Learn More
    €35.25

  • GMW 3286:2016

    Neutral Salt Spray (NSS) Test


    8/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15049:2016

    Key Characteristic Designation System Process
    8/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 8081 :2016

    tatic Headspace GC-MS for Interior Materials Interior Emissions
    8/1/2016 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 14905-2016

    Service Coolant Fill Procedure
    7/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GM 9984303:2016

    Phosphate Coating Final Sealant (Passivation) Rinse for Small Parts
    6/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14449:2016

    Testing the Force Fit of Exhaust Pipe Clamped Connections


    6/1/2016 - - - GM
    Learn More
    €33.84

  • GMW 14672-2016

    Electrolytically Deposited Multi-Coat Systems
    5/1/2016 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16266:2016

    Engine Accessory Drive Generator Decoupling Pulley
    3/1/2016 - PDF sécurisé - English - GM
    Learn More
    €62.04

  • GMW 16256:2016

    Bushing Stick-Slip Noise Test * CUST MUST FILL OUT GMW AUTH FORM *
    1/1/2016 - PDF - English - GM
    Learn More
    €62.04

  • GMW 16153-2015

    Charge Air Cooler Ducts Product and Test Procedure
    12/1/2015 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14082:2015

    Electrical Hardware Requirements and Guidelines


    12/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GMW 17334:2015

    Single Wall Construction Steel Tubing
    10/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GM 9985976:2015

    Adhesive, One Part, Cyanoacrylate, Surface Insensitive
    10/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GM 9084P:2015

    Test for Prevailing Torque Nuts
    9/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16258:2015

    Stabilizer Bar Bushing Wear Test * CUST MUST FILL OUT GMW AUTH FORM *
    9/1/2015 - PDF - English - GM
    Learn More
    €62.04

  • GMW 15862:2015

    Bar Code Content, Format, and Label Requirements for Traceability and Error Proofing (including Verification and Compliance Confirmation)
    8/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GMW 16244:2015

    Engine Accessory Drive Belt Tensioner

    "customer must fill GMW authorisation form"
    8/1/2015 - PDF - English - GM
    Learn More
    €62.04

  • GMW 16257:2015

    Stabilizer Bar Gripper Bushing Squeak Noise Test * CUST MUST FILL OUT GMW AUTH FORM *
    8/1/2015 - PDF - English - GM
    Learn More
    €62.04

  • GMW 3362:2015

    Non-Electrolytically Applied Zinc Rich Coating
    7/1/2015 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW14892-2015

    Adhesion Requirements for Bonded Interior Parts
    7/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14129:2015

    Sewing Thread
    6/1/2015 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15634:2014

    Determination of Volatile and Semi-Volatile Organic Compounds from Vehicle Interior Materials
    11/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15356:2014

    Sheet Metal Rating Scale
    10/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3149:2014

    AIR LEAK TESTING FOR LEAK RATE DETERMINATION OF POWERTRAIN SEALING SYSTEMS
    9/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15357:2014

    Component Rating Scale
    9/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15358:2014

    Fastener Rating Scale
    9/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15359:2014

    White Corrosion Rating Scale Guideline
    9/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14333:2014

    Resistance to Fuels of Exteriors Automotive Materials and Components


    9/1/2014 - - - GM
    Learn More
    €33.84

  • GMW 3431

    General procedures for testing switches
    8/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14679 (2007)

    Test of Electrochemical Resistance of Elastomeric Compounds
    7/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14448:2012

    Wheel attachment looseing test
    5/1/2014 - PDF - English - GM
    Learn More
    €35.25

  • GME 00255:2014

    Zinc Phosphate Treatment with Metal Pigmented and/or Organic Coating
    5/1/2014 - PDF - English, German - GM
    Learn More
    €33.84

  • GMW 14650

    Performance Requirements for Exterior Plastic Parts
    2/1/2014 - PDF - English - GM
    Learn More
    €33.84

  • GMW 4700:2014

    Zinc Alloy Plating
    2/1/2014 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 15725:2013

    Performance Requirements for Engine Compartment Plastic Parts
    9/1/2013 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 15264:2013

    Accelerated corrosion laboratory test with dynamic simulation option
    9/1/2013 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GMW 15657:2013

    Aluminum Forgings
    6/1/2013 - PDF - English - GM
    Learn More
    €33.84

  • GME 60209:2013

    DETERMINATION OF POROSITY OF COATINGS ON FERROUS MATERIALS
    1/1/2013 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3118D (07/06)

    Verifications of requirements for side impact/roof rail airbag modules
    12/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 6992

    VISUAL APPEARANCE ASSESSMENT
    12/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3116:2012

    Recyclability, Recoverability Guidelines
    11/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14165

    TORQUE, TENSION, AND ANGLE EVALUATION OF FASTENED JOINTS
    11/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14910:2012

    Wheel lateral impact test procedure
    11/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 15261:2012

    EXHAUST SYSTEM COMPONENT AND JOINT LEAKAGE
    11/1/2012 - PDF sécurisé - English - GM
    Learn More
    €33.84

  • GME 08005:2012

    Elastomeric Fuel Hoses, Free from Deposits
    10/20/2012 - PDF - English - GM
    Learn More
    €33.84

  • GM 9050P:2012

    SOURCE PERFORMANCE EVALUATION AND REPORTING PROCEDURE FASTENERS
    9/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GM 9092P:2012

    Test for Prevailing Torque Nuts (Hand Qualification Test)

    INACTIVE FOR NEW DESIGN
    9/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GME 60407:2012

    Test Method for Determining the Impact Resistance of Organic Coatings
    9/1/2012 - PDF - English, German - GM
    Learn More
    €33.84

  • GMW 14291

    Determination of Push-on and Pull-off Forces of Small Diameter Hoses
    9/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14688:2012

    Scratch and mar resistance
    9/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14785:2012

    Coolant joint pressure vibration temperature (PVT) cycle test
    8/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14885:2012

    Painted aluminium road wheels - paint performance requirements
    8/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 14994:2012

    Wheel fastener torque tension test
    7/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 14995:2012

    Wheel fastener torque tension test - reuse
    7/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 3208:2012

    Rotary Abrasion Test, Taber Type
    6/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15015:2012

    Elastic and Non-Elastic Cords, Straps, and Bindings
    6/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 15321:2012

    Wheel inboard rim flange vertical impact
    4/1/2012 - PDF - English - GM
    Learn More
    €35.25

  • GMW 16182:2011

    Engine Oil, Global Service-Fill, Spark-Ignited Engine, SAE 0W-20 and 5W-20
    1/1/2012 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14341:2011

    Wheel rotary bending fatique test
    12/1/2011 - PDF - English - GM
    Learn More
    €34.12

  • GMW 14780:2011

    GENERAL HVAC MODULE REQUIREMENTS
    12/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3417:2011

    Natural Weathering Exposure Tests for Interior Trims/Materials
    11/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14129

    Sewing thread
    11/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14661 (2006)

    Elastomer for Damping Parts Chassis
    10/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14445 (08/11)

    SUNSCREEN AND INSECT REPELLANT RESISTANCE
    8/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14036:2011

    Global Generator Specification
    6/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 4710 (04/11)

    Electronic control module traceability and verification data requirements
    4/1/2011 - PDF - English - GM
    Learn More
    €35.25

  • GMW 14089 (03/11)

    LABEL DESIGN CRITERIA
    3/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3001 (03/11)

    Rules and regulations for material specifications
    3/1/2011 - PDF - English - GM
    Learn More
    €62.04

  • GMW 14130:2011

    Resistance to Marring or Scuffing
    2/1/2011 - PDF - English - GM
    Learn More
    €33.84

  • GMW 3205(2011)

    Determining the Resistance to Odor Propagation of Interior Materials
    1/1/2011 - PDF - English - GM
    Learn More
    €35.25

  • GMW 3152 (12/10)

    Statis sealing presure measurement for powertrain sealing systems
    12/1/2010 - PDF - English - GM
    Learn More
    €34.12

  • GMW 3025

    Sag and slide test
    10/1/2010 - PDF - English - GM
    Learn More
    €33.84

  • GMW 14181

    HAND HELD FORCE INPUT FREQUENCY RESPONSE FUNCTION (FRF) ACQUISITION MASTER TEST PROCEDURE
    1/1/2010 - PDF - English - GM
    Learn More
    €33.84

  • GMI 60266-2008

    Determination of Resistance to Cleaning Agents of Automotive Trim Components
    6/1/2008 - PDF - English, German - GM
    Learn More
    €33.84

  • GM 1820M/C (01/08)

    Nickel and stannate salts potassium stannate
    1/1/2008 - PDF - English - GM
    Learn More
    €62.04

  • GM 4345M (2005)

    Corrosion Protective Coatings, Zinc, Plating
    1/1/2005 - PDF - English - GM
    Learn More
    €62.04

  • GME B 040 1175:2003

    Greases for supplier use

    Complete Document
    4/30/2003 - PDF - English, German - GM
    Learn More
    €33.84

  • GME B 040 1065:2003

    LONG-LIFE COOLANT
    4/11/2003 - PDF - English, German - GM
    Learn More
    €33.84

  • GME 08450 Part 3:1995

    Caps, Part 3 Bayonet Cap, Coolant Reservior and Overflow Sensor
    9/20/1995 - PDF - English - GM
    Learn More
    €33.84

194 Item(s)

Set Ascending Direction
per page

List  Grid