FORD

Items 1 to 200 of 303 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  • FORD WSS-M99P9999-A1:2020

    RESTRICTED SUBSTANCE MANAGEMENT STANDARD ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/9/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M15P50-C1:2020

    PERFORMANCE, PLASTIC COMPONENTS, ENGINE PRECONDITIONING ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/3/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M99P32-E6:2020

    PERFORMANCE, ACOUSTICAL AND THERMAL COMPONENTS AND ASSEMBLIES FOR ENGINE, UNDERHOOD, AND TUNNEL APPLICATIONS ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/2/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 107-01:2020

    CROCKING TEST
    5/27/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 105-03:2020

    DIMENSIONAL STABILITY OF TEXTILE TRIM MATERIALS
    5/27/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 151-05:2020

    DETERMINATION OF 180 DEGREE PEEL ADHESION STRENGTH
    4/29/2020 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M21P53-A2:2020

    CORROSION PROTECTIVE COATING, HIGH TEMP, ZINC-RICH INORGANIC BASECOAT, ALUMINUM-RICH ORGANIC TOPCOAT, GRAY ***TO BE USED WITH FORD WSS-M99P1111-A***


    2/4/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M64J35-C1:2020

    PRIMER, WATERBORNE CATHODIC ELECTROCOAT, 25 MICROMETRE FILM BUILD, GRAY, LEAD FREE, 175 C BAKING TEMPERATURE, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/29/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M8G249-A:2020

    GASKET, STEEL CORE, NBR ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/29/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2A175-A2:2020

    ALUMINUM ALLOY, SHEET, HEAT TREATABLE, STRUCTURAL, HIGH STRENGTH, THICK GAGE ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/29/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M8G252-A3:2020

    GASKET, STEEL CORE, NBR *** TO BE USED WITH FORD WSS -M99P1111 -A***
    1/29/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESR M2P92-A:2020

    INT QUALITY, EXTERIOR TEXTURED AND NON-TEXTURED - LOW GLOSS AIR DRY ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BA 120-01:2020

    RESISTANCE SPOT WELDING ACCEPTANCE TEST FOR HETEROGENEOUS STEEL COMBINATIONS
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BL 107-01:2020

    COOLANT HOSE EXTRACTION TEST
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M96D4-B:2020

    HOSE, HYDRAULIC BRAKE ***TO USED WITH FORD WSS-M99P1111-A***
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M98P14-A1:2020

    PERFORMANCE OF PLASTIC FUEL TUBE MATERIALS USED IN FLEX FUELS *** TO BE USED WITH FORD WSS -M99P1111 -A***
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M99P33-A:2020

    STRUCTURAL PERFORMANCE, CAVITY REINFORCING ENGINEERED PARTS, HEAT CURING ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/22/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WX 100:2020

    FINISH SPECIFICATION
    1/19/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2C949-A:2020

    FLUID, ULTRA LOW VISCOSITY (ULV) AUTOMATIC TRANSMISSION ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/17/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2F196-B1:2020

    FABRIC, WOVEN ACRYLIC, LAMINATE CONVERTIBLE TOP MATERIAL ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/17/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2F220-A1:2020

    FABRIC, PVC COATED MARINE GRADE WITH HIGH UV AND BIOCIDE PROPERTIES ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/17/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2F221-A1:2020

    FABRIC, POLYURETHANE (PU) COATED DRY EXPANDED WITH PREMIUM HAPTIC ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/17/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSB M4G355-A1:2020

    SEALER, TAPE FORM, EPDM BASE (TACKY SIDE) AND EVA FILM (NON-TACKY SIDE), HEAT EXPANDABLE, WELDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/8/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M2C945-B1:2020

    OIL, ENGINE, GASOLINE, ILSAC GF-5, SAE 5W-20 ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/8/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M5H34-B2:2020

    FABRIC, MOONROOF/SUNROOF ROLLERSHADE MEDIUM LIGHT TRANSMITTANCE *** TO BE USED WITH FORD WSS -M99P1111 -A***
    1/8/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESB M3G123-B:2020

    TAPE, POLYETHYLENE, PRESSURE SENSITIVE, INTERIOR (ANTISQUEAK) ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/7/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESB M3G161-A:2020

    TAPE, POLYETHYLENE - PRESSURE SENSITIVE EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/7/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M3G178-B1:2020

    TAPE, DECORATIVE, PRESSURE SENSITIVE, EXTERIOR, LOW UV, VERTICAL APPLICATIONS (Below Greenhouse) ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/7/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M11P68-A1:2020

    TAPE, PERFORMANCE, PRESSURE SENSITIVE ADHESIVE ONE-SIDED, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/7/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M99C121-A:2020

    PRELUBRICANT, ANTI-WEAR *** TO BE USED WITH FORD WSS -M99P1111 -A***
    1/7/2020 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M21P53-A1:2019

    FASTENER FINISH S453, HIGH TEMP, ZINC-RICH INORGANIC BASECOAT, ALUMINUM-RICH ORGANIC TOPCOAT, GRAY ***TO BE USED WITH FORD WSS-M99P1111-A***


    11/21/2019 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BN 112-08:2019

    SOILING & CLEANABILITY TEST FOR INTERIOR TRIM MATERIALS
    10/30/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M15P6-E:2019

    PERFORMANCE REQUIREMENTS, PACKAGE TRAY ASSEMBLY ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/24/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M8P30-A1:2019

    PERFORMANCE, LAMINATION FOR SEATING AND INTERIOR TRIM ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/26/2019 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M11P65-A:2019

    TAPE, PERFORMANCE, PRESSURE SENSITIVE ADHESIVE TWO SIDED, INTERIOR AND EXTERIOR, EMBLEM, AND BADGES ***TO BE USED WITH FORD WSS-M99P111-A***
    9/9/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BI 024-01:2019

    Corrosion testing of threaded fastener finishes
    8/23/2019 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M99D63-B1:2019

    THERMOPLASTIC ELASTOMER, FLOOR COVERING, GRAINED, SHAPED ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/22/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 106-02:2019

    SEAM DETERIORATION TESTING
    8/19/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M99P29-C1:2019

    PERFORMANCE, ENERGY ABSORBING FOAM, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/16/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK-M4D637-A1:2019

    ACETAL (POM) HOMOPOLYMER, MELT FLOW RATE 1 – 4 ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/16/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS M2P177-C1:2019

    PAINT PERFORMANCE, METAL SUBSTRATES, LOW VISIBILITY, 4 WEEK RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/29/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M8P18-C1:2019

    PERFORMANCE, SEATING FABRIC FOAM BI-LAMINATE ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/26/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M21P42-A1:2019

    CORROSION PROTECTIVE COATING, ZINC RICH INORGANIC BASECOAT, LUBRICATED ALUMINUM RICH ORGANIC TOPCOAT, SILVER ***TO BE USED WITH FORD WSS-M99P1111-A***


    3/22/2019 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M21P42-A3:2019

    FASTENER FINISH S442, ZINC RICH INORGANIC BASECOAT, LUBRICATED INORGANIC TOPCOAT, SILVER ***TO BE USED WITH FORD WSS-M99P1111-A***


    3/22/2019 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M1P85-B1:2019

    PLATING, ELECTROLYTIC ZINC, 5 MICROMETERS, THIN FILM PASSIVATE ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/28/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M15P20-B1:2019

    PERFORMANCE, POLYMERIC FOAM FOR SEATING APPLICATIONS, INCLUDING CUSHIONS, ARMRESTS, AND HEADRESTRAINTS ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/23/2019 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M3H151-A1:2018

    CARPET, BCF NYLON 6/6, CUT PILE, PRINCETON PATTERN, 390 g/m2 (11.5 oz), POLYESTER BACKING ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/11/2018 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 14736:2018

    Determination of the Torsional Force-Deflection Characteristics of Elastomeric Components Under Uni-Axial-Stress
    10/1/2018 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BO 040-01:2018

    SHORT AND LONG TERM ENVIRONMENTAL TESTING
    7/27/2018 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BZ 108-01:2018

    10-L BAG METHOD FOR MEASURING VOC EMISSIONS FROM VEHICLE INTERIOR MATERIALS


    7/2/2018 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M99P43-E1:2018

    PERFORMANCE, GENUINE SEATING LEATHER, STANDARD TOP COAT ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/15/2018 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 3112:2018

    VERIFICATION OF REQUIREMENTS FOR FRONTAL AIRBAG MODULES*INCLUDES: CG3378, CG4680, CG5059 & CG5110*GMW REST/CONF STD-CONTAC SALES US CUSTOMERS CALL 1-800-854-7179/NON-US SELECT WORLDWIDE OFFICES LINKAT BOTTOM OF PAGE TO FIND OFFICE TO CONTACT * CONTAINS COLOR**
    6/1/2018 - PDF - English - FORD
    Learn More
    €62.04

  • GMW 16853:2018

    COMPREHENSIVE STANDARD FOR OVERALL EMISSION TESTING OF INTERIOR MATERIALS AND PARTS (FOGGING, ODOR, EMISSIONS, CARBONYLS, AMINES)*INCLUDES: CG5025
    5/1/2018 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BI 168-01:2018

    FLUID RESISTANCE OF CHASSIS AND EXTERIOR MATERIALS FOR INCIDENTIAL EXPOSURE
    4/18/2018 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M8P25-C:2018

    PERFORMANCE, SEWING THREAD ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/9/2018 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BO 116-01:2018

    RESISTANCE TO INTERIOR WEATHERING
    3/12/2018 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M15P4-H:2018

    ASSEMBLY PERFORMANCE, HARD MOLD-IN-COLOR INTERIOR COMPONENTS ***TO BE USED WITH FORD WSS-M99P1111-A***
    3/9/2018 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 3109:2018

    FRONTAL AIRBAG MODULES ** INCLUDES CG3378 AND CG5095 **GMW RESTRICTED/CONFIDENTIAL STD - CONTACT SALES - US CUST CALL 1-800-854-7179/NON-US SELECT WW OFFICES LINK AT BOTTOM OF PAGE TO FIND OFFICE TO CONTACT * CONTAINS COLOR**
    3/1/2018 - PDF - English - FORD
    Learn More
    €62.04

  • FORD WRS-M3H153-A1:2018

    CARPET, POLYESTER, ASHBURY PATTERN NON WOVEN, RANDOM VELOUR, NEEDLED, MOLDABLE POLYETHYLENE, MASS BACKED 585 g/m2 (17 oz), 100% PCR/PIR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/26/2018 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M8P16-B:2017

    PERFORMANCE, CARPET, FLOOR AND TRIM ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/14/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M8P16-B:2017

    PERFORMANCE, CARPET, FLOOR AND TRIM ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/14/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WX 200:2017

    PERFORMANCE REQUIREMENTS OF ISO METRIC THREADED FASTENERS WITH DRY FILM MICROENCAPSULATED ADHESIVE COMPOUND APPLED TO THE THREADS
    12/1/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M15P32-D:2017

    TRIM ASSEMBLY, ENCLOSED LUGGAGE COMPARTMENT COVERING ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/1/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WE 900:2017

    Dimensional Requirements for Prevailing Torque Type Steel Metric Hex Nuts and Hex Flange Nuts
    11/22/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD M2D441-A:2017

    THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/16/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSE-M2D451-A:2017

    HYDROGENATED NITRILE (HNBR) RUBBER ***TO BE USED WITH FORD WSS-M99P1111-A***


    11/16/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WRS-M3H155-A3:2017

    CARPET, 100% PIR RECYCLED POLYESTER, NON WOVEN, DILOUR, FUSED BACK, 350 G/M2 (10.0 OZ) FACE ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/16/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M4D556-B8:2017

    POLYPROPYLENE (PP) COPOLYMER, 22% MINERAL FILLED MOLDING COMPOUND, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/14/2017 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 14674:2017

    Organic Coat Finish for Cast Iron Parts
    11/1/2017 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BN 125-02:2017

    RESISTANCE TO LINT ADHESION AND LINT RETENTION OF FABRICS
    10/27/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSE M96D34-A1:2017

    HOSE, EPDM RUBBER, PARA-ARAMID FIBERS REINFORCED, ENGINE COOLANT AND ELECTRO - CHEMICAL DEGRADATION RESISTANT, HIGH ELONGATION, LOW MODULUS ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/13/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BN 153-01:2017

    LIQUID REPELLENCY COATING VERFICIATION TEST
    8/4/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BO 127-03:2017

    STRESS CRACKING TEST FOR PLASTICS
    7/7/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 108-02:2017

    Resistance to Abrasion. Taber Abraser
    7/7/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M11P62-A:2017

    ADHESIVE, INTERIOR PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
    7/5/2017 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 14700:2017

    Stone Impact Resistance of Coatings
    7/1/2017 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSD M2D378-A1:2017

    THERMOPLASTIC ELASTOMER (TEO) POLYOLEFIN, EPDM RUBBER MODIFIED ENGINE COOLANT AND MODERATE HEAT RESISTANT - 60 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/14/2017 - PDF - English - FORD
    Learn More
    €38.50

  • GMW 14731:2017

    Stress-Corrosion Cracking of Copper Based Alloys
    6/1/2017 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BI 106-01:2017

    Coating Adhesion Test
    5/31/2017 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BO 131-03:2017

    INTERIOR ODOR TEST
    5/31/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M13P13-A:2017

    CHASSIS AND UNDERHOOD GREASE PERFORMANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/8/2017 - - - FORD
    Learn More
    €38.50

  • FORD WSS-M99P2222-D1:2017

    PERFORMANCE, VEHICLE INTERIOR ENVIRONMENT QUALITY COMPONENT AND ALLERGEN REQUIREMENTS ***TO BE USED WITH FORD WSS-M99P1111-A***


    4/19/2017 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M99P32-E1:2017

    PERFORMANCE, ACOUSTICAL AND INSULATORS, INTERIOR ASSEMBLIES ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/16/2017 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 15408:2017

    Turbo charger hoses with high temperature resistance
    2/1/2017 - PDF - English - FORD
    Learn More
    €31.02

  • GMW 14671:2016

    Organic Coating Performance for Underhood and Underbody Components
    12/1/2016 - PDF - English - FORD
    Learn More
    €31.02

  • GMW 14162:2016

    Colorfastness to Artificial Weathering
    11/1/2016 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSS-M99P48-A1:2016

    FOAM PERFORMANCE (INTERIOR, EXTERIOR, UNDERHOOD) ***TO BE USED WITH FORD WSS-M99P1111-A***
    7/25/2016 - PDF - English - FORD
    Learn More
    €38.50

  • GMW 7293:2016

    Subjective Subsystem/Component Squeak and Rattle Test
    7/1/2016 - PDF - English - FORD
    Learn More
    €62.04

  • FORD WRS-M3H159-A1:2016

    CARPET, POLYESTER, NON WOVEN, RANDOM VELOUR, NEEDLED, STANFORD PATTERN, POLYETHYLENE MOLDABLE BACKING, 495 g/m2 (14.6 oz), 100% PCR CONTENT ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/18/2016 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WF 900:2016

    Dimensional and Material Requirements and Mechanical Properties of Flat, Toothed, Conical, Bowed and Wavy Washers
    4/13/2016 - PDF - English - FORD
    Learn More
    €66.00

  • GMW 14698:2016

    Scratch Resistance of Organic Coatings and Self-adhesive Films
    4/1/2016 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSS M21P44-A1+IN4:2016

    Corrosion Protective Coating, Zinc, Nickel Alloy, Trivalent Passivate, Silver
    3/22/2016 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BI 113-01:2016

    Water and soap spotting test for paint
    3/22/2016 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M99A3-A:2016

    EMBRITTLEMENT AVOIDANCE ***TO BE USED WITH FORD WSS-M99P1111-A***


    1/11/2016 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M1H756-A:2015

    FABRIC, TWILL PATTERN, DOBBY WOVEN ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/9/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M1H710-A:2015

    FABRIC, DUNE II PATTERN, WEFT KNITTED, UNLAMINATED ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/9/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M15P37-C1_2015

    PERFORMANCE, TOE PAD, FOOTREST COVER ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/19/2015 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 14664:2015

    Powder Coat Finish
    11/1/2015 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BZ 151-01:2015

    DETERMINATION OF EMISSIONS OF ORGANIC AND CARBONYL COMPOUNDS FROM MATERIALS BY MICRO-CHAMBER METHOD


    10/1/2015 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M2A171-A1:2015

    Die cast aluminium - general purpose - to be used with FORD WSS-M99P1111-A
    10/1/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD-M2D376-A:2015

    ETHYLENE/PROPYLENE RUBBER (EPDM), ENGINE COOLANT AND COMPRESSION STRESS RELAXATION RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***




    10/1/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BO 111-02:2015

    TEST FOR INDENTATION AND RECOVERY
    9/14/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BI 113-08:2015

    RESISTANCE TO SUNSCREEN LOTION AND INSECT REPELLENT
    7/16/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 125-01:2015

    RESISTANCE TO LINT PICKUP AND LINT RETENTION OF FABRICS
    5/28/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD ESA M64J24-A:2015

    Paint, Waterborne Wheel Primer, Acrylic Enamel, Cathodic Electrocoat
    5/6/2015 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M4D638-B:2015

    POLYPROPYLENE (PP) MOLDING COMPOUND, MOLDED-IN-COLOR, INTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/9/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD-M2F164-B:2015

    FABRIC, VINYL COATED, WOVEN, EXPOSED LOAD COMPARTMENT COVER ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/2/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M2A178-A1:2015

    Aluminium casting alloy, cylinder head, light duty - to be used with FORD WSS-M99P1111-A
    1/30/2015 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD M21P11-B1:2015

    CORROSION PROTECTIVE COATING ZINC ORGANIC TYPE, 480 H, SILVER ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/27/2015 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WRS-M3H155-A1:2015

    CARPET, POLYESTER, NON WOVEN, DILOUR, LATEX AND LOW DENSITY POLYETHYLENE BACKED, MOLDABLE 350 G/M2 (10.0 OZ) NOMINAL FACE ***TO BE USED WITH FORD WSS-M99P1111-A***


    1/22/2015 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D754-A+IN4:2015

    Polyamide (PA) 6, Heat Stabilized, 15% Glass Fiber Reinforced Molding Compound, Exterior
    1/1/2015 - PDF - English - FORD
    Learn More
    €38.50

  • GMW 3089:2015

    General Motors Local Area Network (GMLAN) Single Wire Controller Area Network (SWCAN) Physical and Data Link Layers Specification


    1/1/2015 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSD-M2F170-B:2014

    FABRIC, POLYURETHANE COATED ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/24/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSB-M2F176-A:2014

    FABRIC, VINYL COATED, CALENDERED/EXPANDED, MICROPERFORATED ***TO BE USED WITH FORD WSS-M99P1111-A***
    11/24/2014 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 14294:2014

    Determintion of Resistance of Elastomer Profiles to Transit Coating (Protective Wax) Remover
    11/1/2014 - PDF - English - FORD
    Learn More
    €31.02

  • FORD ESE-M4G17-B:2014

    SEALER, THERMOSET POLYESTER RESIN ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/16/2014 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M21P28-A2:2014

    CORROSION PROTECTIVE COATING, ORGANIC POLYMER, FRICTION-MODIFIED ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/14/2014 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BO 113-04:2014

    ROLLING SPHERE FATIGUE TEST FOR ARM REST AND OTHER INTRICATE TRIM ASSEMBLIES
    5/7/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M8P26-A1:2014

    PERFORMANCE, EXTERIOR ROLL-UP TONNEAU ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/2/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD-M2A143-A1:2014

    Aluminium alloy, casting as cast condition to be used with FORD WSS-M99P1111-A
    2/12/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD-M2A143-A3:2014

    ALUMINUM ALLOY, CASTING, HEAT TREATED CONDITION ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/12/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 112-12:2014

    RESISTANCE TO STAINING OF SEATING FABRICS
    1/14/2014 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 102-04:2013

    DETERMINATION OF FLEX FOLD OF TEXTILE TRIM MATERIALS
    12/3/2013 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M2F178-A1:2013

    FABRIC, VINYL COATED, MULTI-PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/31/2013 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WD 952:2013

    Mechanical and Performance Requirements of Through Hardened and Carbon Restored Thread Rolling Screws with Induction Hardened Points
    8/30/2013 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M99P23-C1+IN4:2013

    Material Control, Black Box Components
    8/1/2013 - PDF - English - FORD
    Learn More
    €38.50

  • GMW 14656:2013

    Suspension Coil and Leaf Springs
    7/1/2013 - PDF - English - FORD
    Learn More
    €31.02

  • FORD FLTM BN 119-01:2013

    Determination of seam strength of textile trim materials
    6/25/2013 - PDF - English - FORD
    Learn More
    €32.90

  • GMW 15487:2013

    Determining the Resistance to Abrasion of Organic Coating
    6/1/2013 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSB-M1A215-E1:2013

    Steel, sheet, hot rolled, rolled HSLA
    "to be used with FORD WSS-M99P1111-A"
    5/6/2013 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD M1A333-A1:2013

    Steel, sheet, hot rolled, low carbon
    "to be used with FORD WSS-M99P1111-A"
    5/6/2013 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M1A338-A1:2013

    Steel, sheet, hot rolled, high strength, carbon manganese type
    "to be used with FORD WSS-M99P1111-A"
    5/6/2013 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M3P36-A1/A2:2013

    PHOSPHATE COATING, LIGHT ***TO BE USED WITH FORD WSS-M99P1111-A***


    1/9/2013 - PDF - English - FORD
    Learn More
    €38.50

  • GMW 14682:2013

    Force-Deflection Characteristics of Elastomeric Components under Uni-Axial Stress
    1/1/2013 - PDF - English - FORD
    Learn More
    €31.02

  • FORD WSD M21P10-B1:2012

    CORROSION PROTECTIVE COATING ORGANIC TYPE - 72 H ***TO BE USED WITH FORD WSS-M99P1111-A***
    12/4/2012 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESA M1J53-A:2012

    Enamel, Synthetic, Black Air Dry
    6/25/2012 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSB-M64J28-A1:2012

    PRIMER, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, 180 °C BAKING TEMPERATURE ***TO BE USED WITH FORD WSS-M99P1111-A***


    5/21/2012 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD M96D40-A1:2012

    Tube, EPDM Rubber, Engine Coolant, Low Compression Set
    5/3/2012 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESA M3G109-A:2012

    Tape, Paper Backed - Polyester Laminate - Printable - Pressure Sensitive
    4/24/2012 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M99P1111-A:2012

    STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS ***TO BE USED WITH FORD WSS-M99P9999-A1***

    4/4/2012 - PDF - English - FORD
    Learn More
    €32.90

  • Ford WSS M99P1111-A:2012

    STANDARD REQUIREMENTS FOR PRODUCTION MATERIALS
    4/4/2012 - PDF - English - FORD
    Learn More
    €38.50

  • FORD W-CMS:2011

    Control of casting manufacturing processes
    12/14/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD ESF M70J1-A:2011

    Paint, Powdered - Thermosetting Epoxy
    12/7/2011 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BI 109-01:2011

    VISUAL APPEARANCE EVALUATION
    9/26/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BI 110-01:2011

    Measurement of the Gloss of Paint Panels
    9/26/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M4D955-B:2011

    POLYETHYLENE (PE), HIGH DENSITY MOLDING COMPOUND, NON VISIBLE EXTERIOR / UNDERBODY ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/8/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D744-A+IN4:2011

    Acetal (POM) Homopolymer, UV Stabilized Molding Compound, Interior
    7/27/2011 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BZ 156-01:2011

    DETERMINATION OF FORMALDEHYDE, ALDEHYDE, AND KETONE EMISSIONS FROM NON METALLIC COMPONENTS, PARTS AND MATERIALS IN THE VEHICLE INTERIOR
    7/14/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D745-A2:2011

    ABS MOLDING COMPOUND, HIGH HEAT RESISTANCE HIGH IMPACT STRENGTH, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/23/2011 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M2F186-A1:2011

    FABRIC, VINYL COATED, MULTI-PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/12/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M2F186-A1:2011

    FABRIC, VINYL COATED, MULTI-PURPOSE ***TO BE USED WITH FORD WSS-M99P1111-A***
    5/12/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 102-02:2011

    FLEX TEST FOR POLYMERIC COATED FABRICS AND GENUINE LEATHERS
    4/20/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BZ 157-01:2011

    DETERMINATION OF ORGANIC EMISSIONS FROM NON-METALLIC MATERIALS IN VEHICLE INTERIORS BY HEADSPACE GAS CHROMATOGRAPHY
    3/11/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D692-A1:2011

    THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 55 DUROMETER D HARDNESS, EXTRUSION MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
    3/1/2011 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSB-M4D841-A2:2011

    POLYPROPYLENE (PP) COPOLYMER, 16% MINERAL FILLED, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/25/2011 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSB M1P9-B:2010

    PLATING, TIN - HOT DIP OVER FERROUS, COPPER OR COPPER ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/28/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS M4D550-A7:2010

    THERMOPLASTIC POLYOLEFIN ELASTOMER (TEO) MINERAL FILLED, HIGH IMPACT MOLDING COMPOUND, PAINTABLE OR MOLDED-IN COLOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    7/14/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD-M2D243-A4:2010

    POLYURETHANE (PUR) FOAM, FLAME BONDABLE ***TO BE USED WITH FORD WSS-M99P1111-A***
    6/25/2010 - PDF - English - FORD
    Learn More
    €32.90

  • FORD FLTM BN 159-01:2010

    DETERMINATION OF BROKEN FABRIC FIBERS IN A SEWN SEAM
    6/11/2010 - PDF - English - FORD
    Learn More
    €32.90

  • FORD SD-M99D9104-A:2010

    MAT - THERMOPLASTIC RUBBER, SOUND DEADENING ***TO BE USED WITH FORD WSS-M99P1111-A***
    2/24/2010 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D849-A:2010

    POLYAMIDE 6 (PA6), 30% MINERAL REINFORCED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/25/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M4D893-A1:2010

    THERMOPLASTIC POLYESTER-ETHER ELASTOMER (TEEE), 66 DUROMETER D HARDNESS MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/20/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESA-M4D200-B:2010

    POLYURETHANE (PUR) FOAM, FLEXIBLE, RESTRICTED FLOW ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/19/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M4D837-A:2010

    POLYBUTYLENE TEREPHTHALATE (PBT) 20% GLASS SPHERE FILLED MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/19/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD-M2D447-A3:2010

    ETHYLENE/ACRYLIC (AEM) RUBBER, OIL RESISTANT, 60 HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***


    1/19/2010 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D795-A+IN4:2010

    Polyamide 66 (PA 66), Heat Stabilized, Molybdenum Disulfide Filled Molding Compoud
    1/15/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK M4D802-A+IN4:2010

    Polyamide (PA) 12, Semi Flexible, Heat Stabilized Molding and Extrusion Compoud
    1/15/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSF M4D737-A:2010

    Polybutylene Terephthalate (PBT), 30% Glass Fiber Reinforced, Molding Compound
    1/12/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESH M4D560-A:2010

    POLYPROPYLENE (PP) INJECTION MOLDING COMPOUND, 36% GLASS FIBER AND MICA FILLED ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/8/2010 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WM921:2009

    Dimensional requirements for metric port
    12/8/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSE M97B44-B:2009

    Coolant Concentrate, Extended Life, for Systems Containing Cast and Wrought Aluminum
    11/12/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESF M2C69-A:2009

    OIL, TURBINE (300) ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/26/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BN 158-01:2009

    MARTINDALE ABRASION TESTING OF TEXTILE FABRICS
    9/29/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M4D672-A:2009

    Polyamide (PA 6) Molding Compound
    9/22/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M2D489-A1:2009

    SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 60 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/22/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M2D490-A1:2009

    SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 70 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/22/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD M2D474-A1:2009

    Thermoplastic Elastomer (TES+) Styrene Block Copolymer, Thermo Plastic Polyurethane Blend, 72 Durometer a Hardness, Exterior
    9/21/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M2D475-A2:2009

    HYDROGENATED ACRYLONITRILE BUTADIENE (HNBR) O-RING ***TO BE USED WITH FORD WSS-M99P1111-A***


    9/21/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS-M2D488-A1:2009

    SILICONE (VMQ) RUBBER, IMPROVED COMPRESSION SET, 50 DUROMETER, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/21/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD M2D421-A:2009

    Rubber, Thermoplastic Polyurethane (PUR) Oil Resistant, Hydrolysisresistant, 80 IRHD Hardness
    9/17/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSE-M2D414-A:2009

    SILICONE (VMQ) RUBBER, HIGH TEMPERATURE RESISTANT, LOW VOLATILES, LONG LIFE GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***


    9/17/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSE-M2D399-A3:2009

    SILICONE RUBBER (VMQ), MEDIUM HARDNESS, HIGH TEMPERATURE, LOW VOLATILE SILICONE, GASKET ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/27/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSD M2D381-A2:2009

    THERMOPLASTIC ELASTOMER (TPE), POLYOLEFIN, EPDM RUBBER MODIFIED, MODERATE HEAT RESISTANT, FLAME RETARDANT, 82 DUROMETER A HARDNESS ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/26/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD-M15H51-D:2009

    THREAD, NYLON, THREE PLY, TOP THREAD, TEX 70 ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/6/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD SS-M2A9001-A:2009

    ALUMINUM ALLOY - SILICON - COPPER ***TO BE USED WITH FORD WSS-M99P1111-A***
    4/9/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BI 107-05:2009

    Thermal Shock Test for Coating Adhesion
    2/3/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BO 162-01:2009

    RESISTANCE TO SCRATCH AND MARR
    1/22/2009 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS M21P27-A1:2009

    SUBSEQUENT TREATMENTS FOR FASTENER SURFACE FINISHES ***TO BE USED WITH FORD WSS-M99P1111-A***
    1/6/2009 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSS-M2P180-C:2008

    PAINT PERFORMANCE, RIGID SUBSTRATES, EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/15/2008 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSK M2P153-A1:2008

    PAINT PERFORMANCE, CHASSIS, LOW LEVEL VISIBLE, 16 h SALT SPRAY ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/10/2008 - PDF - English - FORD
    Learn More
    €38.50

  • FORD ESF M4D335-A:2007

    NYLON (TYPE 66), 43% GLASS FIBER REINFORCED ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/11/2007 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSD M13P7-A:2007

    LUBRICANT, TORQUE/CLAMPING FORCE CONTROL ***TO BE USED WITH FORD WSS-M99P1111-A***
    8/28/2007 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BP 122-01:2007

    Determination of cold adhesion requirements of weatherstrip low friction coatings to paintes metals or glass
    2/21/2007 - PDF - English - FORD
    Learn More
    €38.50

  • FORD FLTM BP 106-03:2007

    LOW TEMPERATURE BRITTLENESS OF RUBBER AND RUBBER-LIKE MATERIALS
    2/21/2007 - - - FORD
    Learn More
    €38.50

  • FORD FLTM BN 112-09:2006

    TEST METHOD FOR SUSCEPTIBILITY OF TRIM MATERIALS TO DYE INGRESS
    12/11/2006 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK-M2D416-A:2006

    POLYURETHANE (PUR) FOAM, MOLDED HIGH RESILIENCE ***TO BE USED WITH FORD WSS-M99P1111-A***
    10/17/2006 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSB M4D638-A:2006

    POLYPROPYLENE (PP) MOLDING COMPOUND, COLOR PIGMENTED, LOW GLOSS, UV STABILIZED, INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
    10/16/2006 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSK-M4D660-A:2006

    POLYPROPYLENE (PP) COPOLYMER, COLOR PIGMENTED INTERIOR***TO BE USED WITH FORD WSS-M99P1111-A***
    10/16/2006 - PDF - English - FORD
    Learn More
    €32.90

  • FORD WSS M2P177-A1:2006

    PAINT PERFORMANCE, CHASSIS LOW LEVEL VISIBLE, 96 H SALT SPRAY RESISTANCE ***TO BE USED WITH FORD WSS-M99P1111-A***
    9/29/2006 - PDF - English - FORD
    Learn More
    €38.50

  • FORD WSB-M98D31-A1:2006

    LAMINATE, POLYVINYL CHLORIDE + ABS BLEND (PVC+ABS) OR POLYVINYL CHLORIDE (PVC) SKIN/POLYPROPYLENE (PP) FOAM, LOW PRESSURE MOLDING **TO BE USED WITH FORD WSS-M99P1111-A**
    9/29/2006 - PDF - English - FORD
    Learn More
    €32.90

Items 1 to 200 of 303 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2