AENOR



AENOR is a Spanish Association for Standardization and Certification that develops technical standards that allow companies to improve their quality and competitiveness, as well as their products and services.

AENOR constantly works to improve the quality and safety of its products, being at the forefront of technology. AENOR standards provide a comprehensive source of information, especially on improving the quality of products and services, the health and safety of workers and consumers, taking into account environmental issues.

These standards allow companies to gain consumer confidence in today's economy, increase their productivity, competitiveness and economic growth. They can also serve as a strategic tool in the face of new economic challenges.

 

Logo AENOR

 

 

 

 

 

 

Items 1 to 200 of 32707 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 164
  • UNE-ISO 59010:2025

    Circular economy — Guidance on the transition of business models and value networks
    4/16/2025 - PDF - English, Spanish - AENOR
    Learn More
    €153.00

  • UNE-EN 1366-10:2023+A1:2025

    Fire resistance tests for service installations - Part 10: Smoke control dampers
    4/16/2025 - - - AENOR
    Learn More
    From: €135.00

  • UNE-EN 1744-4:2025

    Tests for chemical properties of aggregates - Part 4: Determination of water susceptibility of fillers for bituminous mixtures
    4/16/2025 - - - AENOR
    Learn More
    From: €75.00

  • UNE-EN 12163:2025

    Copper and copper alloys - Rod for general purposes
    4/16/2025 - - - AENOR
    Learn More
    From: €97.00

  • UNE-EN 12164:2025

    Copper and copper alloys - Rod for free machining purposes
    4/16/2025 - - - AENOR
    Learn More
    From: €96.00

  • UNE-EN 12165:2025

    Copper and copper alloys - Wrought and unwrought forging stock
    4/16/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN 12735-2:2025

    Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
    4/16/2025 - - - AENOR
    Learn More
    From: €76.00

  • UNE-EN 14105:2025

    Fat and oil derivatives - Fatty Acid Methyl Esters (FAME) - Determination of free and total glycerol and mono-, di-, triglyceride contents
    4/16/2025 - - - AENOR
    Learn More
    From: €79.00

  • UNE-EN 14803:2021+A1:2025

    Waste management - Identification and/or determination of the quantity of waste
    4/16/2025 - - - AENOR
    Learn More
    From: €73.00

  • UNE-EN 17450-2:2025

    Fixed firefighting systems - Water mist systems - Part 2: Product characteristics and test methods for nozzles
    4/16/2025 - - - AENOR
    Learn More
    From: €91.00

  • UNE-EN 17957:2025

    Vapour products - Vaping regime for products intended to be used for direct to lung inhalation
    4/16/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN 60898-1:2020/A1:2025

    Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
    4/16/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN IEC 61000-2-4:2025

    Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in power distribution systems in industrial locations for low-frequency conducted disturbances
    4/16/2025 - - - AENOR
    Learn More
    From: €107.00

  • UNE-EN 60898-1:2020/A11:2025

    Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
    4/16/2025 - - - AENOR
    Learn More
    From: €62.00

  • UNE 58014:2025

    Steel static storage systems - Validation of storage equipment
    4/9/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE 146160:2025

    Aggregates for non-harmonised uses. Requirements
    4/9/2025 - PDF - Spanish - AENOR
    Learn More
    €79.00

  • UNE-ISO 30415:2025

    Human resource management. Diversity and inclusion
    4/9/2025 - PDF - English, Spanish - AENOR
    Learn More
    €160.50

  • UNE-EN 81-44:2025

    Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines
    4/9/2025 - - - AENOR
    Learn More
    From: €145.00

  • UNE-EN 334:2021+A1:2025

    Gas pressure regulators for inlet pressure up to 10 MPa (100 bar)
    4/9/2025 - - - AENOR
    Learn More
    From: €154.00

  • UNE-EN 455-1:2020+A2:2025

    Medical gloves for single use - Part 1: Requirements and testing for freedom of holes
    4/9/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN 933-6:2025

    Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates
    4/9/2025 - - - AENOR
    Learn More
    From: €73.00

  • UNE-EN 1097-1:2025

    Tests for mechanical and physical properties of aggregates - Part 1: Determination of the resistance to wear (micro-Deval)
    4/9/2025 - - - AENOR
    Learn More
    From: €72.00

  • UNE-EN 1097-6:2025

    Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption
    4/9/2025 - - - AENOR
    Learn More
    From: €117.00

  • UNE-EN 1097-7:2025

    Tests for mechanical and physical properties of aggregates - Part 7: Determination of the particle density of filler - Pyknometer method
    4/9/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN 17860-1:2025

    Carrier cycles - Part 1: Terms and definitions
    4/9/2025 - - - AENOR
    Learn More
    From: €61.00

  • UNE-EN 17860-2:2025

    Carrier Cycles - Part 2: Lightweight single track carrier cycles - Mechanical aspects
    4/9/2025 - - - AENOR
    Learn More
    From: €134.00

  • UNE-EN 17860-3:2025

    Carrier Cycles - Part 3: Lightweight multi track carrier cycles - Mechanical aspects
    4/9/2025 - - - AENOR
    Learn More
    From: €109.00

  • UNE-EN ISO 544:2025

    Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €64.00

  • UNE-EN ISO 5124:2025

    Loading and unloading of liquefied natural gas (LNG) tank wagons and containers (ISO 5124:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €77.00

  • UNE-EN ISO 9717:2025

    Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 11334-4:2025

    Assistive products for walking, manipulated by one arm - Requirements and test methods - Part4: Walking sticks with three or more legs (ISO 11334-4:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €75.00

  • UNE-EN ISO 13431:2025

    Geotextiles and geotextile-related products - Determination of tensile creep and creep rupture behaviour (ISO 13431:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 16140-2:2016/A1:2025

    Microbiology of the food chain — Method validation — Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method — Amendment 1: Revision of qualitative method comparison study data evaluation, relative level of detection calculations in the interlaboratory study, calculation and interpretation of the relative trueness study, and inclusion of a commercial sterility testing protocol for specific products (ISO 16140-2:2016/A1:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €82.00

  • UNE-EN ISO 16140-4:2021/A1:2025

    Microbiology of the food chain - Method validation - Part 4: Protocol for method validation in a single laboratory - Amendment 1: Validation of a larger test portion size for qualitative methods (ISO 16140-4:2020/Amd 1:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN ISO 18081:2025

    Non-destructive testing - Acoustic emission testing (AT) - Leak detection by means of acoustic emission (ISO 18081:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €93.00

  • UNE-EN ISO 19164:2025

    Geographic information - Indoor feature model (ISO 19164:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €106.00

  • UNE-EN ISO 19675:2025

    Non-destructive testing - Ultrasonic testing - Specification for a calibration block for phased array testing (PAUT) (ISO 19675:2017)
    4/9/2025 - - - AENOR
    Learn More
    From: €73.00

  • UNE-EN ISO 22174:2025

    Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection and quantification of microorganisms - General requirements and definitions (ISO 22174:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €85.00

  • UNE-EN ISO 24804:2025

    Recreational diving services - Requirements for rebreather diver training - No-decompression diving (ISO 24804:2022)
    4/9/2025 - - - AENOR
    Learn More
    From: €74.00

  • UNE-EN ISO 24804:2025/A11:2025

    Recreational diving services - Requirements for rebreather diver training - No-decompression diving
    4/9/2025 - - - AENOR
    Learn More
    From: €28.00

  • UNE-EN ISO 24805:2025

    Recreational diving services - Requirements for rebreather diver training - Decompression diving to 45 m (ISO 24805:2022)
    4/9/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN ISO 24805:2025/A11:2025

    Recreational diving services - Requirements for rebreather diver training - Decompression diving to 45 m
    4/9/2025 - - - AENOR
    Learn More
    From: €28.00

  • UNE-EN ISO 24806:2025

    Recreational diving services - Requirements for rebreather diver training - Decompression diving to 60 m (ISO 24806:2023)
    4/9/2025 - - - AENOR
    Learn More
    From: €80.00

  • UNE-EN ISO 24807:2025

    Recreational diving services - Requirements for rebreather diver training - Decompression diving to 100 m (ISO 24807:2023)
    4/9/2025 - - - AENOR
    Learn More
    From: €84.00

  • UNE-EN ISO 19164:2025

    Geographic information - Indoor feature model (ISO 19164:2024)
    4/9/2025 - - - AENOR
    Learn More
    From: €106.00

  • UNE 66102:2025

    Management system for technical centers of tachographs
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €129.00

  • UNE 127340:2025

    Concrete kerb units. Requirements and test methods. National complement to the standard UNE-EN 1340
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €83.00

  • UNE-EN 14587-2:2025

    Railway applications - Infrastructure - Flash butt welding of new rails - Part 2: R200, R220, R260, R260Mn, R320Cr, R350HT, R350LHT, R370CrHT and R400HT grade rails by mobile welding machines at sites other than a fixed plant
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €93.00

  • UNE-EN ISO 8804-1:2025

    Requirements for the training of scientific divers - Part 1: Scientific divers (ISO 8804-1:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €64.00

  • UNE-EN ISO 8804-2:2025

    Requirements for the training of scientific divers - Part 2: Advanced scientific divers (ISO 8804-2:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 13351:2025

    Fans - Dimensions (ISO 13351:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 14344:2025

    Welding consumables - Procurement of filler materials and fluxes (ISO 14344:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 15995:2021/A1:2025

    Gas cylinders - Specifications and testing of LPG cylinder valves - Manually operated - Amendment 1 (ISO 15995:2021/Amd 1:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN ISO 18497-4:2025

    Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 4: Verification methods and validation principles (ISO 18497-4:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €111.00

  • UNE-EN ISO/ASTM 52928:2025

    Additive manufacturing of metals - Feedstock materials - Powder life cycle management (ISO/ASTM 52928:2024)
    4/2/2025 - PDF - Spanish - AENOR
    Learn More
    €84.00

  • UNE-IEC/TR 61328:2025

    Live working - Guidelines for the installation of transmission and distribution line conductors and earth wires - Stringing equipment and accessory items
    4/2/2025 - PDF - English - AENOR
    Learn More
    €134.40

  • UNE-EN IEC 60567:2025

    Oil-filled electrical equipment - Sampling of free gases and analysis of free and dissolved gases in mineral oils and other insulating liquids - Guidance
    4/2/2025 - - - AENOR
    Learn More
    From: €129.00

  • UNE-EN IEC 61439-5:2024/AC:2025-02

    Low-voltage switchgear and controlgear assemblies - Part 5: Assemblies for power distribution in public networks
    4/2/2025 - - - AENOR
    Learn More
    €0.00

  • UNE-EN IEC 61643-332:2025

    Components for low-voltage surge protection - Part 332: Selection and application principles for metal oxide varistors (MOV)
    4/2/2025 - - - AENOR
    Learn More
    From: €123.00

  • UNE-EN IEC 61558-2-10:2025

    Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages exceeding 1 000 V
    4/2/2025 - - - AENOR
    Learn More
    From: €75.00

  • UNE-EN 50214:2025

    Flat flexible cables
    4/2/2025 - - - AENOR
    Learn More
    From: €84.00

  • UNE-EN IEC 60228:2025

    Conductors of insulated cables
    4/2/2025 - - - AENOR
    Learn More
    From: €77.00

  • UNE-EN ISO 7287:2002/A1:2025

    Graphical symbols for thermal cutting equipment - Amendment 1 (ISO 7287:2002/Amd 1:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €35.00

  • UNE-EN ISO 9013:2017/A1:2025

    Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances - Amendment 1 (ISO 9013:2017/Amd 1:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €35.00

  • UNE-EN ISO 18497-1:2025

    Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 1: Machine design principles and vocabulary (ISO 18497-1:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN ISO 21012:2025

    Cryogenic vessels - Hoses (ISO 21012:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €82.00

  • UNE-EN ISO 14031:2025

    Environmental management - Environmental performance evaluation - Guidelines (ISO 14031:2021)
    4/2/2025 - - - AENOR
    Learn More
    From: €107.00

  • UNE-EN ISO 2884-1:2025

    Paints and varnishes - Determination of viscosity using rotational viscometers - Part 1: Absolute viscosity measurement with cone-plate measuring geometry at high shear rates (ISO 2884-1:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €59.00

  • UNE-EN ISO 8804-3:2025

    Requirements for the training of scientific divers - Part 3: Scientific diving project leader (ISO 8804-3:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €64.00

  • UNE-EN ISO 24808:2025

    Recreational diving services - Requirements for rebreather instructor training (ISO 24808:2024)
    4/2/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 24808:2025/A11:2025

    Recreational diving services - Requirements for rebreather instructor training
    4/2/2025 - - - AENOR
    Learn More
    From: €28.00

  • UNE 192011-4:2025

    Procedure for the regulatory inspection. Pressure equipment. Part 4: Specific requirements for cryogenic tanks
    3/26/2025 - PDF - Spanish - AENOR
    Learn More
    €81.00

  • UNE-EN 14382:2021+A1:2025

    Gas safety shut-off devices for inlet pressure up to 10 MPa (100 bar)
    3/26/2025 - PDF - Spanish - AENOR
    Learn More
    €129.00

  • UNE-EN 15288-1:2019+A1:2025

    Swimming pools for public use - Part 1: Safety requirements for design
    3/26/2025 - PDF - Spanish - AENOR
    Learn More
    €84.00

  • UNE-EN ISO 17174:2025

    Molecular biomarker analysis - DNA barcoding of fish and fish products using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments (ISO 17174:2024)
    3/26/2025 - PDF - Spanish - AENOR
    Learn More
    €77.00

  • UNE-EN ISO 18497-3:2025

    Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 3: Autonomous operating zones (ISO 18497-3:2024)
    3/26/2025 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN 16116-2:2025

    Railway applications - Design requirements for steps, handrails and associated access for staff - Part 2: Freight wagons
    3/26/2025 - - - AENOR
    Learn More
    From: €76.00

  • UNE-EN ISO 4349:2025

    Solid recovered fuels - Determination of the recycling index for co-processing (ISO 4349:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN 13451-1:2021+A1:2025

    Swimming pool equipment - Part 1: General safety requirements and test methods for equipment installed in pools for public use
    3/26/2025 - - - AENOR
    Learn More
    From: €85.00

  • UNE-EN 15347-1:2025

    Plastics - Sorted plastics wastes - Part 1: General Characterisation
    3/26/2025 - - - AENOR
    Learn More
    From: €61.00

  • UNE-EN 16976:2025

    Ambient air - Determination of the particle number concentration of atmospheric aerosol
    3/26/2025 - - - AENOR
    Learn More
    From: €115.00

  • UNE-EN 17892:2025

    Water quality - Determination of selected per- and polyfluoroalkyl substances in drinking water - Method using liquid chromatography/tandem-mass spectrometry (LC-MS/MS)
    3/26/2025 - - - AENOR
    Learn More
    From: €95.00

  • UNE-EN ISO 7218:2025

    Microbiology of the food chain - General requirements and guidance for microbiological examinations (ISO 7218:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €136.00

  • UNE-EN ISO 8028:2025

    Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €61.00

  • UNE-EN ISO 9773:2025

    Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 17665:2025

    Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €183.00

  • UNE-EN ISO 19152-3:2025

    Geographic information - Land Administration Domain Model (LADM) - Part 3: Marine georegulation (ISO 19152-3:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €122.00

  • UNE-EN ISO 18497-2:2025

    Agricultural machinery and tractors - Safety of partially automated, semi-autonomous and autonomous machinery - Part 2: Design principles for obstacle protection systems (ISO 18497-2:2024)
    3/26/2025 - - - AENOR
    Learn More
    From: €77.00

  • UNE-EN IEC 60335-2-40:2025

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €175.00

  • UNE-EN IEC 60335-2-40:2025/A11:2025

    Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €72.00

  • UNE-EN IEC 60793-1-41:2025

    Optical fibres - Part 1-41: Measurement methods and test procedures - Bandwidth
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €88.00

  • UNE-EN IEC 60793-1-45:2025

    Optical fibres - Part 1-45: Measurement methods and test procedures - Mode field diameter
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-EN IEC 60794-1-101:2025

    Optical fibre cables - Part 1-101: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Tensile, method E1
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • UNE-EN IEC 60794-1-104:2025

    Optical fibre cables - Part 1-104: Generic specification - Basic optical cable test procedures - Mechanical tests methods - Impact, method E4
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €60.00

  • UNE-EN IEC 60794-1-201:2025

    Optical fibre cables - Part 1-201: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling, Method F1
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN IEC 60794-1-209:2025

    Optical fibre cables - Part 1-209: Generic specification - Basic optical cable test procedures - Environmental test methods - Ageing, Method F9
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN IEC 60794-1-212:2025

    Optical fibre cables - Part 1-212: Generic specification - Basic optical cable test procedures - Environmental test methods - Temperature cycling with cable elements fixed at both ends, Method F12
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €64.00

  • UNE-EN IEC 60794-1-213:2025

    Optical fibre cables - Part 1-213: Generic specification - Basic optical cable test procedures - Environmental test methods - Microduct pressure withstand, Method F13
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN IEC 60794-1-217:2025

    Optical fibre cables - Part 1-217: Generic specification - Basic optical cable test procedures - Environmental test methods - Cable shrinkage (fibre protrusion), Method F17
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €73.00

  • UNE-EN IEC 61084-2-1:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €79.00

  • UNE-EN IEC 61084-2-1:2025/A11:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-1: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting on walls and ceilings
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €58.00

  • UNE-EN IEC 61084-2-2:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €89.00

  • UNE-EN IEC 61084-2-2:2025/A11:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for mounting underfloor, flushfloor, or onfloor
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN IEC 61084-2-3:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN IEC 61084-2-3:2025/A11:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-3: Particular requirements - Slotted cable trunking systems intended for installation in cabinets
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €54.00

  • UNE-EN IEC 61084-2-4:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-EN IEC 61084-2-4:2025/A11:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 2-4: Particular requirements - Service poles and service posts
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €61.00

  • UNE-EN IEC 61300-2-27:2025

    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust (laminar flow)
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €69.00

  • UNE-EN IEC 61300-2-34:2025

    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €62.00

  • UNE-EN IEC 62153-4-15:2022/A1:2025

    Metallic cables and other passive components test methods - Part 4-15: Electromagnetic compatibility (EMC) related test method for measuring transfer impedance and screening attenuation or coupling attenuation with triaxial cell
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €47.00

  • UNE-EN IEC 63252:2021/A11:2025

    Energy consumption of vending machines
    3/19/2025 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN 1865-2:2025

    Patient handling equipment used in ambulances - Part 2: Power assisted stretcher
    3/19/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 712-1:2025

    Cereals and cereal products - Determination of moisture content - Part 1: Reference method (ISO 712-1:2024)
    3/19/2025 - - - AENOR
    Learn More
    From: €72.00

  • UNE-EN ISO 712-2:2025

    Cereals and cereal products - Determination of moisture content - Part 2: Automatic drying oven method (ISO 712-2:2024)
    3/19/2025 - - - AENOR
    Learn More
    From: €61.00

  • UNE-EN ISO 7301:2023/A1:2025

    Rice - Specification - Amendment 1 (ISO 7301:2021/Amd 1:2024)
    3/19/2025 - - - AENOR
    Learn More
    From: €35.00

  • UNE-EN ISO 80369-2:2025

    Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications (ISO 80369-2:2024, Corrected version 2024-09)
    3/19/2025 - - - AENOR
    Learn More
    From: €117.00

  • UNE-EN 18031-1:2025

    Common security requirements for radio equipment - Part 1: Internet connected radio equipment
    3/12/2025 - - - AENOR
    Learn More
    From: €179.00

  • UNE-EN IEC 61084-1:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
    3/12/2025 - - - AENOR
    Learn More
    From: €102.00

  • UNE-EN IEC 61084-1:2025/A11:2025

    Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements
    3/12/2025 - - - AENOR
    Learn More
    From: €50.00

  • UNE-EN ISO 13585:2025

    Brazing - Qualification testing of brazers and brazing operators (ISO 13585:2021)
    3/12/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN ISO 18363-3:2025

    Animal and vegetable fats and oils - Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS - Part 3: Method using acid transesterification and measurement for 2-MCPD, 3-MCPD and glycidol (ISO 18363-3:2024)
    3/12/2025 - - - AENOR
    Learn More
    From: €76.00

  • UNE-EN 18031-2:2025

    Common security requirements for radio equipment - Part 2: radio equipment processing data, namely Internet connected radio equipment, childcare radio equipment, toys radio equipment and wearable radio equipment
    3/12/2025 - - - AENOR
    Learn More
    From: €188.00

  • UNE-EN 1143-2:2025

    Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems
    3/12/2025 - - - AENOR
    Learn More
    From: €113.00

  • UNE-EN 16156:2025

    Cigarettes - Assessment of the ignition propensity - Safety requirement
    3/12/2025 - - - AENOR
    Learn More
    From: €50.00

  • UNE-EN 17628:2025

    Fugitive and diffuse emissions of common concern to industry sectors - Standard method to determine diffuse emissions of volatile organic compounds into the atmosphere
    3/12/2025 - - - AENOR
    Learn More
    From: €137.00

  • UNE-EN 18015:2025

    Automotive fuels - Determination of hydrocarbon group types and select hydrocarbon and oxygenate compounds - Gas chromatography with vacuum ultraviolet absorption spectroscopy (GC-VUV) method
    3/12/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN 18031-3:2025

    Common security requirements for radio equipment - Part 3: Internet connected radio equipment processing virtual money or monetary value
    3/12/2025 - - - AENOR
    Learn More
    From: €182.00

  • UNE-EN ISO 2419:2025

    Leather - Physical and mechanical tests - Specimen and test piece conditioning (ISO 2419:2024)
    3/12/2025 - - - AENOR
    Learn More
    From: €54.00

  • UNE-EN ISO 20701:2025

    Leather - Tests for colour fastness - Colour fastness to saliva (ISO 20701:2024)
    3/12/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN ISO/CIE 11664-5:2025

    Colorimetry - Part 5: CIE 1976 L*u*v* colour space and u', v' uniform chromaticity scale diagram (ISO/CIE 11664-5:2024)
    3/12/2025 - - - AENOR
    Learn More
    From: €64.00

  • UNE 195006:2025

    Tuna from responsible fishing. Purse seine freezer vessels.
    3/5/2025 - PDF - Spanish - AENOR
    Learn More
    €85.00

  • UNE-ISO 21127:2025

    Information and documentation — A reference ontology for the interchange of cultural heritage information
    3/5/2025 - PDF - English, Spanish - AENOR
    Learn More
    €276.00

  • UNE-EN 13814-1:2020+A1:2025

    Safety of amusement rides and amusement devices - Part 1: Design and manufacture
    3/5/2025 - - - AENOR
    Learn More
    From: €182.00

  • UNE-EN 13814-2:2020+A1:2025

    Safety of amusement rides and amusement devices - Part 2: Operation, maintenance and use
    3/5/2025 - - - AENOR
    Learn More
    From: €92.00

  • UNE-EN 13814-3:2020+A1:2025

    Safety of amusement rides and amusement devices - Part 3: Requirements for inspection during design, manufacture, operation and use
    3/5/2025 - - - AENOR
    Learn More
    From: €59.00

  • UNE-EN 15624:2021+A1:2025

    Railway applications - Braking - Empty-loaded changeover devices
    3/5/2025 - - - AENOR
    Learn More
    From: €90.00

  • UNE-EN 17328:2025

    Complementary product category rules for gypsum-based construction products
    3/5/2025 - - - AENOR
    Learn More
    From: €82.00

  • UNE-EN 17893:2025

    Thermal road vehicles - Temperature-controlled systems using flammable refrigerants for transport of goods - Requirements and risk analysis process
    3/5/2025 - - - AENOR
    Learn More
    From: €131.00

  • UNE-EN ISO 9227:2023/A1:2025

    Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/Amd 1:2024)
    3/5/2025 - - - AENOR
    Learn More
    From: €35.00

  • UNE-EN ISO 20387:2020/A11:2025

    Biotechnology - Biobanking - General requirements for biobanking
    3/5/2025 - - - AENOR
    Learn More
    From: €28.00

  • UNE-EN ISO 23500-2:2025

    Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2024)
    3/5/2025 - - - AENOR
    Learn More
    From: €102.00

  • UNE-EN 17399:2025

    Algae and algae products - Vocabulary
    3/5/2025 - - - AENOR
    Learn More
    From: €75.00

  • UNE-EN ISO 23500-1:2025

    Preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO 23500-1:2024)
    3/5/2025 - - - AENOR
    Learn More
    From: €158.00

  • UNE-EN ISO/IEC 17043:2023/A11:2025

    Conformity assessment - General requirements for the competence of proficiency testing providers
    3/5/2025 - - - AENOR
    Learn More
    From: €28.00

  • UNE-ISO IWA 48:2025

    Framework for implementing environmental, social and governance (ESG) principles
    2/28/2025 - PDF - Spanish - AENOR
    Learn More
    €0.00

  • UNE 192014-2:2025

    Procedure for the regulatory inspection of high voltage electrical installations not owned by electric power transmission and distribution entities. Part 2: High voltage lines and their technical annexes.
    2/26/2025 - PDF - Spanish - AENOR
    Learn More
    €135.00

  • UNE-EN 1090-2:2019+A1:2025

    Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
    2/26/2025 - - - AENOR
    Learn More
    From: €185.00

  • UNE-EN 15119-2:2025

    Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method
    2/26/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN 15346:2025

    Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates
    2/26/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN 15877-1:2025

    Railway applications - Markings of railway vehicles - Part 1: Freight wagons
    2/26/2025 - - - AENOR
    Learn More
    From: €153.00

  • UNE-EN 50172:2025

    Emergency escape lighting systems
    2/26/2025 - - - AENOR
    Learn More
    From: €84.00

  • UNE-EN 62552-1:2020/A11:2025

    Household refrigerating appliances - Characteristics and test methods - Part 1: General requirements
    2/26/2025 - - - AENOR
    Learn More
    From: €61.00

  • UNE-EN 62552-3:2021/A11:2025

    Household refrigerating appliances - Characteristics and test methods - Part 3: Energy consumption and volume
    2/26/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 1514:2025

    Paints and varnishes - Standard panels for testing (ISO 1514:2024)
    2/26/2025 - - - AENOR
    Learn More
    From: €71.00

  • UNE-EN ISO 10253:2025

    Water quality - Marine algal growth inhibition test with Skeletonema sp. and Phaeodactylum tricornutum (ISO 10253:2024)
    2/26/2025 - - - AENOR
    Learn More
    From: €90.00

  • UNE-EN ISO 15614-5:2025

    Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 5: Arc welding of titanium, zirconium and their alloys (ISO 15614-5:2024)
    2/26/2025 - - - AENOR
    Learn More
    From: €80.00

  • UNE-EN ISO 15923-1:2025

    Water quality - Determination of selected parameters by discrete analysis systems - Part 1: Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection (ISO 15923-1:2013)
    2/26/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN 16454:2025

    Intelligent transport systems - ESafety - ECall end to end conformance testing
    2/26/2025 - - - AENOR
    Learn More
    From: €196.00

  • UNE-EN ISO 22163:2025

    Railway applications - Railway quality management system - ISO 9001:2015 and specific requirements for application in the railway sector (ISO 22163:2023)
    2/26/2025 - - - AENOR
    Learn More
    From: €135.00

  • UNE-EN 62552-2:2020/A11:2025

    Household refrigerating appliances - Characteristics and test methods - Part 2: Performance requirements
    2/26/2025 - - - AENOR
    Learn More
    From: €64.00

  • UNE-EN 17881:2025

    Food authenticity - DNA barcoding of bivalves and products derived from bivalves using a defined mitochondrial 16S rRNA gene segment
    2/19/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN 17882:2025

    Food authenticity - DNA barcoding of meat derived from mammals and birds using defined mitochondrial cytochrome b and cytochrome c oxidase I gene segments
    2/19/2025 - - - AENOR
    Learn More
    From: €71.00

  • UNE-EN 17955:2025

    Industrial valves - Functional safety of safety-related automated valves
    2/19/2025 - - - AENOR
    Learn More
    From: €123.00

  • UNE-EN ISO 13032:2025

    Petroleum and related products - Determination of low concentration of sulfur in automotive fuels - Energy-dispersive X-ray fluorescence spectrometric method (ISO 13032:2024)
    2/19/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 18276:2025

    Welding consumables - Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels - Classification (ISO 18276:2024)
    2/19/2025 - - - AENOR
    Learn More
    From: €84.00

  • UNE-CEN ISO/TS 15213-3:2025

    Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 3: Detection of Clostridium perfringens (ISO/TS 15213-3:2024)
    2/12/2025 - - - AENOR
    Learn More
    From: €98.00

  • UNE-EN 603-2:2025

    Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
    2/12/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN 16867:2020+A2:2025

    Building hardware - Mechatronic door furniture - Requirements and test methods
    2/12/2025 - - - AENOR
    Learn More
    From: €125.00

  • UNE-EN ISO 6887-1:2017/A1:2025

    Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions - Amendment 1: Requirements and guidance on the use of larger test portion size for qualitative method (ISO 6887-1:2017/Amd 1:2024)
    2/12/2025 - - - AENOR
    Learn More
    From: €64.00

  • UNE-EN ISO 29461-3:2025

    Air intake filter systems for rotary machinery - Test methods - Part 3: Mechanical integrity of filter elements (ISO 29461-3:2024)
    2/12/2025 - - - AENOR
    Learn More
    From: €80.00

  • UNE 330000-6:2025

    Requirements for the certification scheme of persons in the field of industrial safety. Part 6: Self-propelled travelling crane operator
    2/5/2025 - PDF - Spanish - AENOR
    Learn More
    €71.00

  • UNE-EN 60317-67:2017/A1:2025

    Specifications for particular types of winding wires - Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105
    2/5/2025 - - - AENOR
    Learn More
    From: €47.00

  • UNE-EN IEC 60317-12:2021/A1:2025

    Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120
    2/5/2025 - - - AENOR
    Learn More
    From: €40.00

  • UNE-EN IEC 60437:2025

    Radio interference test on high-voltage insulators
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN IEC 60966-2-1:2025

    Radio frequency and coaxial cable assemblies - Part 2-1: Sectional specification for flexible coaxial cable assemblies
    2/5/2025 - - - AENOR
    Learn More
    From: €82.00

  • UNE-EN IEC 60966-2-2:2025

    Radio frequency and coaxial cable assemblies - Part 2-2: Blank detail specification for flexible coaxial cable assemblies
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN IEC 60966-4:2025

    Radio frequency and coaxial cable assemblies - Part 4: Sectional specification for semi-rigid coaxial cable assemblies
    2/5/2025 - - - AENOR
    Learn More
    From: €80.00

  • UNE-EN ISO 7211-2:2025

    Textiles - Methods for analysis of woven fabrics construction - Part 2: Determination of number of threads per unit length (ISO 7211-2:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €58.00

  • UNE-EN ISO 29464:2025

    Cleaning of air and other gases - Vocabulary (ISO 29464:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €97.00

  • UNE-EN 13991:2025

    Derivatives from coal pyrolysis - Coal tar based oils: creosotes - Specifications and test methods
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN 17235:2025

    Permanent anchor devices and safety hooks
    2/5/2025 - - - AENOR
    Learn More
    From: €97.00

  • UNE-EN 18007-5:2025

    Electromagnetic pulse welding - Part 5: Quality and inspection requirements
    2/5/2025 - - - AENOR
    Learn More
    From: €82.00

  • UNE-EN IEC 61300-1:2022/A1:2025

    Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN IEC 61347-2-1:2025

    Controlgear for electric light sources - Safety - Part 2-1: Particular requirements - Starting devices (other than glow starters)
    2/5/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN ISO 2411:2025

    Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO 10882-1:2025

    Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €96.00

  • UNE-EN ISO 10882-2:2025

    Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €79.00

  • UNE-EN ISO 11782-2:2009/A1:2025

    Corrosion of metals and alloys - Corrosion fatigue testing - Part 2: Crack propagation testing using precracked specimens - Amendment 1 (ISO 11782-2:1998/Amd 1:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN ISO/ASTM 52904:2025

    Additive manufacturing of metals - Process characteristics and performance - Metal powder bed fusion process to meet critical applications (ISO/ASTM 52904:2024)
    2/5/2025 - - - AENOR
    Learn More
    From: €75.00

  • UNE-EN IEC 60966-4-1:2025

    Radio frequency and coaxial cable assemblies - Part 4-1: Blank detail specification for semi-rigid coaxial cable assemblies
    2/5/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE 21150:2025

    Flexible cables with cross-linked elastomer insulation and reinforced cross-linked elastomer sheath with rated voltage 0,6 / 1 kV
    1/29/2025 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE 83520:2025

    Determination of cracking resistance, tenacity and residual resistance using the Barcelona method by control of vertical displacement. Empirical correlations between the UNE-EN 14651:2007+A1:2008 flexotraction test and the Barcelona method for quality control.
    1/29/2025 - PDF - Spanish - AENOR
    Learn More
    €59.00

  • UNE-EN 18007-1:2025

    Electromagnetic pulse welding - Part 1: Welding knowledge, terminology and vocabulary
    1/29/2025 - - - AENOR
    Learn More
    From: €78.00

  • UNE-EN 18007-2:2025

    Electromagnetic pulse welding - Part 2: Design of welded joints
    1/29/2025 - - - AENOR
    Learn More
    From: €53.00

  • UNE-EN 18007-3:2025

    Electromagnetic pulse welding - Part 3: Qualification of welding operators and weld setters
    1/29/2025 - - - AENOR
    Learn More
    From: €69.00

  • UNE-EN 18007-4:2025

    Electromagnetic pulse welding - Part 4: Specification and qualification of welding procedures
    1/29/2025 - - - AENOR
    Learn More
    From: €81.00

  • UNE-EN IEC 61820-1-2:2025

    Electrical installations for lighting and beaconing of aerodromes - Part 1-2: Fundamental principles - Particular requirements for series circuits
    1/29/2025 - - - AENOR
    Learn More
    From: €91.00

  • UNE-EN 480-6:2025

    Admixtures for concrete, mortar and grout - Test methods - Part 6: Infrared analysis
    1/29/2025 - - - AENOR
    Learn More
    From: €50.00

  • UNE-EN ISO 10062:2023/A1:2025

    Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es) - Amendment 1: Footnote of warning (ISO 10062:2022/Amd 1:2024)
    1/29/2025 - - - AENOR
    Learn More
    From: €35.00

  • UNE-EN 16482:2025

    Founding - Continuous cast iron bars
    1/29/2025 - - - AENOR
    Learn More
    From: €77.00

Items 1 to 200 of 32707 total

Set Ascending Direction
per page

List  Grid 

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. 7
  8. 8
  9. 9
  10. 10
  11. 11
  12. 12
  13. 13
  14. 14
  15. 15
  16. 16
  17. 17
  18. 18
  19. 19
  20. 20
  21. ...
  22. 164