SAE J 2552:2014-06-06

SAE J 2552:2014-06-06

Push-On Hose and Mating Hose Fittings (Stabilized: Jun 2014)

Availability: In stock

€119.00

Details

SAE J2552 provides limited, dimensional and general performance requirements for low pressure, field attachable, push-on hose and their mating hose fittings. The intended application is for fluid and pneumatic power used with petroleum base hydraulic fluids, lube oils, water glycols and air, within the temperature ranges listed in Table 1. The maximum working pressure is 1.7 MPa (see Table 2). For air applications the maximum working pressure is at 0.7 MPa.
Hose and hose fittings are manufactured within certain dimensions with tolerance ranges in order to provide the proper gripping and sealing. SAE J2552 hose from one manufacturer may not be compatible with SAE J2552 hose fittings supplied by another manufacturer. It is the responsibility of the fabricator to always follow the manufacturers’ instructions for proper preparation and fabrication of hose assemblies. The fabricator shall consult the manufacturers’ written assembly instructions or the manufacturers directly before intermixing hose and hose fittings from two manufacturers.
Hose assemblies made to this standard shall not be used in dynamic motion, vibrating or impulsing applications, nor for brake hoses or fuel lines.

Additional Info

Author Society of Automotive Engineers International (SAE)
Committee Hydraulic Hose and Hose Fittings Committee
Published by SAE
Document type Standard
Theme Hybrid power,Materials,Hoses,Hydraulic fittings,Automotive
ICS 43.040.99 : Other road vehicle systems
23.100.40 : Piping and couplings
Number of pages 26
Replace SAE J 2552:2009-03-04
Replaced by SAE J 2552:2014-06-06
Set JPAKS10U-10
Document history SAE J 2552:2009-03-04
Keyword SAE 2552,SAE J2552,SAE J2552,SAE J 2552

You may also be interested in the following product(s)