Report

Items 3401 to 3600 of 3716 total

Set Ascending Direction
per page

List  Grid 

  • ASTM Research Report RR:D02-1245

    The precision data for D4953 contained 15 samples, 7 were hydrocarbon only and 8 were fuels containing hydrocarbon-oxygenate blends with a range of oxygen content from 2 to 6% and a vapor pressure range from 41 to 97 kPa (6 to 14 psi). The vapor pressure of these samples was determined by Procedures A and B. A total of 31 laboratories participated in the program, 18 performed Procedure A and 13 Procedure B. Vapor pressure of the hydrocarbon only samples and two samples containing methyl t-butyl ether was also determined by Method D 323.
    3/9/1989 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1244

    An interlaboratory study was conducted by fourteen laboratories testing eight sample oils to establish a precision statement for Test Method D892.
    2/22/1989 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:C09-1001

    The purpose of this report is to report estimates of single-operator (i.e. within laboratory) precision and multilaboratory (i.e. between laboratory) precision, as defined in paragraphs 6.2 and 6.3 of ASTM C 802- 87, for the proposed pozzolanic-activity-with-cement test that has been under development in ASTM C09.03.10. Data were derived from the results of two interlaboratory studies. These studies are the last two in a series of five and were conducted with the method in its currently proposed form. The first three studies were developmental, consequently do not represent the currently proposed form and were not useful for precision estimates. Part 4 of the interlaboratory study was completed in 1987, Part 5 was completed in 1988. The data were analyzed according to ASTM C 802-87. The precision statement was prepared according to ASTM C 670-87. Part 4 of the interlaboratory study included three fly ashes: a Class C fly ash, a Class F fly ash, and an unclassified Class F fly ash. The latter material was known, from other experience, to perform poorly and was included to verify that the proposed method would be sensitive to such a material. Twelve laboratories participated in this study. Part 5 of the interlaboratory study included one Class C fly ash and one Class N pozzolan. Eight laboratories participated. Test ages were 7 and 28 days in both studies.
    2/10/1989 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D26-1005

    An interlaboratory study was conducted by four laboratories testing five grades of virgin solvent samples to establish a precision statement for test method D2111.
    2/9/1989 - PDF - English - ASTM
    Learn More
    €63.00

  • WRC Volume 44 No. 11-12 1989

    Progress Reports Volume 44 No. 11-12 1989
    1/1/1989 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • WRC Volume 44 No. 05-06 1989

    Progress Reports Volume 44 No. 05-06 1989
    1/1/1989 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • ASTM Research Report RR:D09-1024

    This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statements for ASTM D350, Standard Methods of Testing Flexible Treated Sleeving Used for Electrical Insulation. This report covers only part of the full list of methods in this standard. Other methods are still under evaluation.
    12/30/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D09-1025

    This interlaboratory study was undertaken to establish the data necessary to generate precision and bias statement for the Solvent Resistance test method in Methods D2671, Standard Methods of Testing Heat-Shrinkable Tubing for Electrical Use.
    12/30/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1149

    An interlaboratory study was conducted by eleven laboratories testing three samples, a polyethylene, an ABS and an acrylic, to establish a precision statement for test method D635.
    12/30/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D08-1003

    An Interlaboratory Study to establish precisions statements for ASTM D4892, Test Method for Density of Solid Pitch (Helium Pycnometer Method).
    12/27/1988 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:C16-1014

    The purpose of this round robin was to develop a new precision and bias statement for E96. This round robin included both thin films and thick materials, representing both low and high perm values. The object of the research being described in this report was two-fold: (l) establish a precision and bias statement for the test method and (2) seek another standard reference material (SRM) to replace the 1 mil thick polyethylene terephthalate film previously used in Standard C 677 to obtain average exposure conditions surrounding test specimens being used in this test method.
    12/21/1988 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D24-1009

    An interlaboratory study was conducted by four laboratories testing four samples to establish precision statements for ASTM D1937.
    12/2/1988 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D02-1238

    An interlaboratory study was conducted by 39 laboratories testing 23 samples to establish a precision statement for test method D4870.
    12/1/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D01-1057

    Interlaboratory Study to Establish Precision Statements for ASTM D4838, Test Method for Determining the Relative Tinting Strength of Chromatic Paints
    11/8/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1231

    An interlaboratory study was conducted by fourteen laboratories testing ten samples to establish a precision statement for test method D1552.
    8/5/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:C14-1000

    This Research Report provides the data and method of its treatment used to create a statement of Precision and Bias to be included in a revision of C225-73.
    2/24/1988 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1217

    Research report D02-1217 contains supporting data for ASTM D4739, Test Method for Base Number Determination by Potentiometric Titration.
    12/14/1987 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D08-1001

    Research Report D08-1001 contains supporting data for D4616, Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch.
    12/2/1987 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D05-1009

    Research Report D05-1009 contains supporting data for ASTM D2492, Test Method for Forms of Sulfur in Coal.
    8/17/1987 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:F03-1011

    An interlaboratory study was conducted by six laboratories testing eight materials to establish a precision statement for test method F1087.
    7/16/1987 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:B09-1005

    Subcommittee B09.06 on cemented carbides has developed a standard for measuring the fracture toughness of cemented carbides. The round robin inter laboratory test program was conducted according to the standard. This report describes the round robin, and presents and analyzes the test results so that an appropriate precision and accuracy statement can be included in the standard.
    6/2/1987 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:E01-1054

    An interlaboratory study was conducted by eight laboratories testing two steel samples to establish a precision statement for test method E350.
    5/22/1987 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1051

    An interlaboratory study was conducted by nine laboratories testing for nitrogen in different test specimens to establish a precision statement for test method E1019.
    3/8/1987 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D02-1212

    An interlaboratory study was conducted by nine laboratories testing twenty-seven oil samples to establish a precision statement for test method D4684.
    2/6/1987 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1133

    An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D792.
    1/29/1987 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1128

    An interlaboratory study was conducted by six laboratories testing three samples to establish a precision statement for test method D1068.
    1/21/1987 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D02-1209

    An interlaboratory study was conducted by nine laboratories testing eight materials to establish a precision statement for test method D4055.
    1/15/1987 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1132

    An interlaboratory study was conducted by six laboratories testing three materials to establish a precision statement for test method D4603.
    12/3/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D11-1045

    Research Report D11-1045 contains supporting data for ASTM D1646, Test Method for Rubber from Natural or Synthetic Sources - Viscosity and Vulcanization Characteristics Mooney Viscometer.
    11/20/1986 - PDF - English - ASTM
    Learn More
    €115.50

  • ASTM Research Report RR:E01-1050

    An interlaboratory study was conducted by nine laboratories testing two samples to establish a precision statement for test method E34.
    10/23/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1206

    An interlaboratory study was conducted by seven laboratories testing eight samples to establish a precision statement for test method D1160.
    10/14/1986 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:E37-1009

    An interlaboratory study was conducted by nine laboratories testing four materials (Coal, Lube Oil, Polyethylene, and Calcium Oxalate) to establish a precision statement for test method E1131.
    10/14/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1131

    An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method D1894.
    10/3/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D11-1044

    An interlaboratory study was conducted by four laboratories testing three different coated fabric materials to establish a precision statement for test method D3389.
    10/1/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D04-1017

    An interlaboratory study was conducted by twenty laboratories testing four samples to establish a precision statement for test method D546.
    9/29/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1126

    An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method D3082.
    9/29/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D02-1205

    An interlaboratory study was conducted by eleven laboratories testing eight wax samples to establish a precision statement for test method D1321.
    9/22/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:C16-1011

    An interlaboratoty study was conducted by three laboratories testing one sample to establish precision statements for ASTM C166.
    9/18/1986 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:C16-1012

    An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method C356.
    9/18/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D09-1021

    An interlaboratory test program was conducted to determine the precision that would result from the use of two test methods in ASTM D3032 on Hookup Wire Insulation. The methods are for Crush Resistance and for Cut-Through Resistance. Although these methods are separate procedures, they are similar in nature and were conducted in the same test program. The information in this report will serve as a basic for adding precision statements to the methods and the report will serve as a Research Report available from ASTM Headquarters for people interested in performing these tests. The original test program had five laboratories willing to provide data, but two of the laboratories subsequently withdrew and data was only available from three laboratories. The names and organizations or the participating members are given in Appendix 1.
    8/8/1986 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D26-1004

    An interlaboratory study was conducted by five laboratories testing five solvent grades to establish a precision statement for test method D3401.
    7/14/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1198

    An international program was completed in 1983 for standard D445, in which tests were carried out on 14 opaque oils and 1 clear oil. The tests were carried out at three different temperature',s, namely 50, 80 and 100�,C. The corresponding numbers of laboratories which completed tests at these temperatures were 15, 35 and 37.
    7/7/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1125

    An interlaboratory study was conducted by six laboratories testing calcium samples for hardness in water to establish a precision statement for test method D1126.
    6/20/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D01-1049

    An interlaboratory study was conducted by nine laboratories testing five samples of hexyl acetate to establish a precision statement for test method D1364.
    6/13/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D05-1008

    An interlaboratory study was conducted by six laboratories testing ten materials to establish a precision statement for test method D4606.
    6/4/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D11-1099

    Ten laboratories participated in two interlaboratory test programs that were conducted to obtain precision data for D412, one for Method A (dumbbells) and one for Method B (cut rings). Three different materials were tested by the ten laboratories on two different days.
    6/1/1986 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D12-1008

    An interlaboratory study was conducted by six laboratories testing a powder detergent and a liquid detergent to establish a precision statement for test method D4608.
    5/21/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:C24-1017

    An interlaboratory study was conducted by five laboratories testing three materials to establish a precision statement for test method C731.
    4/23/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D32-1017

    An interlaboratory study was conducted by three laboratories testing two materials to establish a precision statement for test method D4164.
    2/25/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D32-1018

    An interlaboratory study was conducted by five laboratories testing gamma-alumina, 1/16 inch extrudates, and alpha-alumina, 3/16 inch pellets to establish a precision statement for test method D4180.
    2/25/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D32-1019

    An interlaboratory study was conducted by twenty-two laboratories testing three materials to establish a precision statement for test method D4567.
    2/25/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D10-1004

    Research Report D10-1004 contains supporting data for ASTM: D775, Method for Drop Test for Loaded Boxes, D959, Method of Drop Test for Filled Bags, D3332, Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines, D2463, Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers.
    2/19/1986 - PDF - English - ASTM
    Learn More
    €102.90

  • ASTM Research Report RR:D11-1041

    An interlaboratory study was conducted by eight laboratories testing four materials to establish a precision statement for test method D813.
    2/19/1986 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:C24-1016

    An interlaboratory study was conducted by six laboratories testing five single component sealants to establish a precision statement for test method C1183.
    1/31/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D24-1004

    Supporting Data for ASTM D3265, Test Method for Carbon Black- Tint Strength
    1/27/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D01-1048

    An interlaboratory study was conducted by five laboratories testing two samples to establish a precision statement for test method D4450.
    1/20/1986 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D20-1125

    An interlaboratory study was conducted by eight laboratories testing five materials to establish a precision statement for test method D638.
    1/20/1986 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D20-1126

    An interlaboratory study was conducted by five laboratories testing plastic samples to establish a precision statement for test method D4350.
    1/20/1986 - PDF - English - ASTM
    Learn More
    €81.90

  • WRC Volume 41 No. 11-12 1986

    Progress Reports Volume 41 No. 11-12 1986
    1/1/1986 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • ASTM Research Report RR:D13-1072

    An interlaboratory study was conducted by sixteen laboratories testing four materials to establish a precision statement for test method D2969.
    12/16/1985 - PDF - English - ASTM
    Learn More
    €115.50

  • ASTM Research Report RR:D27-1004

    Supporting Data for ASTM D4059, Method for Analysis of Polychlorinated Biphenyls in Mineral Insulating Oils by Gas Chromatography
    12/9/1985 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D01-1046

    Two interlaboratory studies were conducted, one by eight laboratories and the other by seven laboratories, both testing three samples to establish a precision statement for test method D4563.
    11/21/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1195

    An interlaboratory study was conducted by seven laboratories testing aviation turbine fuels to establish a precision statement for test method D3240.
    11/21/1985 - PDF - English - ASTM
    Learn More
    €102.90

  • ASTM Research Report RR:D13-1070

    An interlaboratory study was conducted by four laboratories testing three materials to establish a precision statement for test method D3882.
    11/5/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:E01-1044

    An interlaboratory study was conducted by twelve laboratories testing three samples of aluminum alloys to establish a precision statement for test method E34.
    11/5/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:F03-1009

    An interlaboratory study was conducted by seven laboratories testing five materials to establish a precision statement for test method F38.
    11/5/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E28-1006

    An interlaboratory study was conducted by five laboratories testing 18% cold drawn 204 stainless steel samples to establish a precision statement for test method B557 and B557M.
    10/16/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E28-1029

    An interlaboratory study was conducted to determine if different data acquisition systems using different techniques would produce similar results for tension testing of metallic materials
    10/16/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:F17-1037

    An interlaboratory study was conducted by nine laboratories testing a 2 inch medium density polyethylene pipe to establish a precision statement for test method D1598.
    9/27/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:F17-1038

    An interlaboratory study was conducted by nine laboratories testing a 2-in. medium density polyethylene pipe to establish a precision statement for test method D1599.
    9/9/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D13-1069

    An interlaboratory study was conducted by twelve laboratories testing two samples to establish a precision statement for test method D1574.
    9/6/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1120

    An interlaboratory study was conducted by seven laboratories testing for radium in water to establish a precision statement for test method D3454.
    7/23/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D16-1008

    An interlaboratory study was conducted by four laboratories testing three materials to establish a precision statement for test method D4493.
    7/19/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:C24-1015

    An interlaboratory study was conducted by ten laboratories testing three sealants to establish a precision statement for test method C661.
    7/11/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D32-1005

    An interlaboratory study was conducted by four laboratories testing two FCC catalysts to establish a precision statement for test method D4512.
    7/11/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:B09-1002

    This report presents the data and calculated repeatability intervals I (r) and reproducibility intervals I (R) for the test method on compressibility, B331. These intervals or ranges are needed to construct the mandatory precision statements for B331. The interpretation of I (r), repeatability interval is as follows: on the basis of test error alone, the difference in absolute value, of two test results obtained in the same laboratory on the same material will be expected to exceed I (r) only about 5% of the time. Thus, if such a difference is found to be larger than I(r), there is reason to question one or both of the test results. Similarly, I(R), describes the difference between single tests done in separate laboratories. If the absolute difference between two such tests on the same material exceeds I(R), there is reason to question the results of one or both tests, because I(R) is exceeded only 5% of the time.
    7/2/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:F23-1000

    This research report contains supporting data for ASTM F955, Method for Evaluating Heat Transfer Through Materials for Protective Clothing Upon Contact with Molten Substances.
    6/27/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1124

    An interlaboratory study was conducted by nine laboratories testing four polymer samples to establish a precision and bias statement for test method D1238.
    5/8/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D35-1000

    Supporting Data for ASTM D4491, Method for Testing the Water Permeability of Geotextiles by the Permittivity Method
    5/3/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D14-1003

    An interlaboratory study was conducted by nine laboratories testing four different hot melt adhesives to establish a precision statement for test method D4499.
    5/2/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D32-1015

    An interlaboratory study was conducted by seven laboratories testing an equilibrium FCC catalyst to establish a precision statement for test method D4513.
    5/2/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1123

    An interlaboratory study was conducted by twenty-two laboratories testing four polyethylene samples to establish a precision statement for test method D1505.
    4/15/1985 - PDF - English - ASTM
    Learn More
    €115.50

  • ASTM Research Report RR:D01-1045

    An interlaboratory study was conducted by ten laboratories testing four paint samples to establish a precision statement for test method D4457.
    4/8/1985 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D11-1037

    An interlaboratory study was conducted by three laboratories testing five materials to establish a precision statement for test method D1329.
    2/26/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D11-1036

    An interlaboratory study was conducted by six laboratories testing five materials to establish a precision statement for test method D1053.
    2/19/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1119

    An interlaboratory study was conducted by seven laboratories and ten operators testing for the determination of hydrazine in water to establish a precision statement for test method D1385.
    2/1/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1190

    An interlaboratory study was conducted by nine laboratories testing eight samples to establish a precision statement for test method D4422.
    1/25/1985 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:D02-1187

    An interlaboratory study was conducted by twelve laboratories to develop a simple copper strip tarnish procedure for measuring the copper corrosion properties of lubricating grease to establish a precision statement for test method D4048.
    1/11/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1178

    An interlaboratory study was conducted by nine laboratories testing ten samples to establish a precision statement for test method D1322.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1186

    An interlaboratory study was conducted by eleven laboratories testing twelve jet fuel samples and two pure hydrocarbons to establish a precision statement for test method D3701.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1120

    An interlaboratory study was conducted by eleven laboratories testing six materials to establish a precision statement for test method D732.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1041

    An interlaboratory study was conducted by twenty-five laboratories testing for the determination of sulfur in five materials (low alloy steel, two stainless steels, silicon steel, and plain carbon steel) to establish a precision statement for test method E1019.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1042

    An interlaboratory study was conducted by eight laboratories testing for the determination of cerium and lanthanum in iron and steels to establish a precision statement for test method E350.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:E01-1095

    An interlaboratory study was conducted by twenty-three laboratories testing for the determination of vanadium in five materials (pig iron, two tool steels, stainless steel, and low alloy steel) to establish a precision statement for test method E351.
    1/10/1985 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1192

    A large-scale interlaboratory study was conducted to compare the precision associated with CCR (Conradson Carbon Residue Test-RSTH D189) and HCS (Hicro Carbon Residue Test) and establish their difference if any.
    1/1/1985 - PDF - English - ASTM
    Learn More
    €102.90

  • ASTM Research Report RR:D02-1185

    An interlaboratory study was conducted by one laboratory testing nine grease samples to establish a precision statement for test method D4425.
    12/26/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1118

    An interlaboratory study was conducted by eleven laboratories testing three samples to establish a precision statement for test method D4475.
    12/18/1984 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:C07-1003

    An interlaboratory study was conducted by twelve laboratories testing five high calcium quicklime samples and four dolomitic quicklime samples to establish a precision statement for test method C110.
    11/30/1984 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:C16-1007

    An interlaboratory study was conducted by three laboratories testing cellular glass insulation samples to establish a precision statement for test method C240.
    10/29/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1176

    An interlaboratory study was conducted by twelve laboratories testing five grease samples to establish a precision statement for test method D4290.
    10/12/1984 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D20-1116

    An interlaboratory study was conducted by eight laboratories testing four polymer samples (yellow bottle compound, blue bottle compound, white can coating compound, and saran industrial film) to establish a precision statement for test method D4443.
    10/9/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D09-1017

    An interlaboratory study was conducted by six laboratories testing four materials to establish a precision statement for test method D2671.
    8/24/1984 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D32-1010

    An interlaboratory study was conducted by five laboratories testing three samples (AGZ-200, Bobcat 2, and HFZ-20) to establish a precision statement for test method D3906.
    8/20/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:C16-1006

    Seven participants participated in this Interlaboratory study, during which an interlaboratory test was performed on Calcium-silicate block thermal insulation (ASTM-C533, Type 1) to develop a precision statement for Test Method ASTM-C421, Tumbling Friability of Preformed Block-Type Thermal Insulation. The precision of Test Method ASTM-C421 already had been determined for rigid cellular plastic thermal insulation (RR: C16-1006), but Committee C16 required that an additional material be included in the precision statement.
    8/14/1984 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D13-1062

    An interlaboratory study was conducted by five laboratories testing three materials (cotton single yarn chafer, cotton ply yarn chafer, and rayon single yarn chafer) to establish a precision statement for test method D3883.
    7/25/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D13-1067

    An interlaboratory study was conducted by four laboratories testing four fabrics (seersucker, gingham, corduroy, and denim) to establish a precision statement for test method D3775.
    7/25/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D13-1068

    An interlaboratory study was conducted by four laboratories testing four fabrics to establish a precision statement for test method D3774.
    7/25/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1112

    An interlaboratory study was conducted by fourteen laboratories testing for lead in water samples to establish a precision statement for test method D3559.
    7/11/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:C16-1005

    Research Report C16-1005 describes an interlaboratory study in which seven laboratories performed tests on four different materials to establish precision estimates for the proposed standard test method, ASTM 0134-90, for water intake of rigid thermal insulations during partial immersion.
    7/5/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D01-1041

    An interlaboratory study was conducted by four laboratories testing two samples each of n-butyl acetate, n-butyl alcohol, and methyl ethyl ketone to establish a precision statement for test method D1613.
    6/26/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D01-1043

    An interlaboratory study was conducted by five laboratories testing ketone samples to establish a precision statement for test method D3893.
    6/26/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D01-1044

    An interlaboratory study was conducted by eight laboratories testing one sample of methyl ethyl ketone to establish a precision statement for test method D1353.
    6/26/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:C16-1003

    An interlaboratory study was conducted by ten laboratories testing a single sample of glass fiber insulation to establish a precision statement for test method C335.
    5/17/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:E28-1004

    An interlaboratory study was conducted by six laboratories testing six materials to establish a precision statement for test method B557 and B557M.
    3/30/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:E28-1028

    Interlaboratory Study to Establish Precision Statements for ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials
    3/30/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D11-1030

    Research Report D11-1030 contains supporting data for ASTM D991, Test Method for Rubber Property- Volume Resistivity of Electrically Conductive and Antistatic Products.
    3/13/1984 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:C24-1014

    An interlaboratory study was conducted by four laboratories, testing 5/8 diameter Closed Cell, Open Cell and Soft Type backer materials to establish a precision statement for Test Method C1016, standard Test Method for Determination of water Absorption by Sealant Backing (Joint-Filler) Material, for both Procedure A and B.
    3/12/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D01-1038

    An interlaboratory study was conducted by six laboratories testing seven hydrocarbon solvent samples to establish a precision statement for test method D4367.
    3/12/1984 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:D11-1027

    An interlaboratory study was conducted by six laboratories testing two samples to establish a precision statement for test method D624.
    2/14/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D11-1028

    An interlaboratory study was conducted to establish precision statements for ASTM D531-00(2005) Standard Test Method for Rubber Property-Pusey and Jones Indentation.
    2/14/1984 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:D11-1029

    An interlaboratory study was conducted to establish precision statements for ASTM D2240-05, Standard Test Method for Rubber Property- Durometer Hardness.
    2/14/1984 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:D19-1111

    An interlaboratory study was conducted by fourteen laboratories testing four buffer solutions to establish a precision statement for test method D1293.
    2/7/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1102

    An interlaboratory study was conducted by thirteen laboratories testing distilled water samples and seven laboratories testing water of choice to establish a precision statement for test method D1068.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D19-1103

    An interlaboratory study was conducted by fifteen laboratories testing in different water samples to establish a precision statement for test method D1687.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D19-1104

    An interlaboratory study was conducted by six laboratories testing for barium in three reagent water samples and three water of choice samples to establish a precision statement for test method D4382.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1106

    An interlaboratory study was conducted by fifteen laboratories testing for manganese in different water samples to establish a precision statement for test method D858.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D19-1107

    An interlaboratory study was conducted by fourteen laboratories testing for nickel in different water samples to establish a precision statement for test method D1886.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D19-1108

    An interlaboratory study was conducted by fourteen laboratories testing for arsenic in different water samples to establish a precision statement for test method D2972.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D19-1109

    An interlaboratory study was conducted by fourteen laboratories testing for cobalt in different water samples to establish a precision statement for test method D3558.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D19-1110

    An interlaboratory study was conducted by eleven laboratories testing for beryllium in different water samples to establish a precision statement for test method D3645.
    1/31/1984 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D05-1006

    An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D4326.
    1/13/1984 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D32-1009

    An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method D4365.
    1/13/1984 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1112

    An interlaboratory study was conducted by seven laboratories testing polymer samples to establish a precision statement for test method D1243.
    1/12/1984 - PDF - English - ASTM
    Learn More
    €63.00

  • WRC Volume 39 No. 02 1984

    Progress Reports Volume 39 No. 02 1984
    1/1/1984 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • ASTM Research Report RR:D20-1111

    An interlaboratory study was conducted by five laboratories testing resin and nitrile rubber samples to establish a precision statement for test method D4322.
    12/12/1983 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1103

    A round robin study has been conducted to formulate a precision and accuracy statement for the proposed new method ",Package Yield of Film",. These results include data from six laboratories. In the study four materials (polyethylene 0.0025", nominal thickness, polypropylene 0.001", nominal thickness, polyester 0.0005", nominal thickness, and polyester 0.002", nominal thickness were used. Two methods of sample preparation were used in the round. The details are listed in the attached protocol. Differences in the reported values do not appear to be related to sampling method (straight edge versus template). Use of the two methods of sample preparation resulted in ten data sets.
    10/11/1983 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1109

    An interlaboratory study was conducted by seven laboratories testing four samples to establish a precision statement for test method D747.
    10/11/1983 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D01-1034

    An interlaboratory study was conducted by five laboratories testing paint samples to establish a precision statement for test method D4145.
    10/10/1983 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D20-1108

    An interlaboratory study was conducted by eight laboratories testing six polyol samples to establish a precision statement for test method D4273.
    9/23/1983 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D11-1024

    An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method D1415.
    9/8/1983 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D19-1099

    An interlaboratory study was conducted by twelve operators in nine laboratories testing samples in four levels of concentration added to both reagent water and matrix water of their choice to establish a precision statement for test method D4193.
    9/8/1983 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D02-1166

    An interlaboratory study was conducted by six laboratories testing petroleum coke samples to establish a precision statement for test method D4292.
    7/25/1983 - PDF - English - ASTM
    Learn More
    €102.90

  • ASTM Research Report RR:D20-1105

    An interlaboratory study was conducted by five laboratories testing four samples to establish a precision statement for test method D1622.
    6/15/1983 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1091

    An interlaboratory study was conducted by nine laboratories testing five alloy samples to establish a precision statement for test method E350.
    5/10/1983 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D01-1033

    An interlaboratory study was conducted by fourteen laboratories testing three methanol samples to establish a precision statement for test method D1363.
    4/29/1983 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D20-1101

    An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision and bias statement for test method D882.
    4/13/1983 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:D05-1005

    An interlaboratory study was conducted by six laboratories testing seven coal samples to establish a precision statement for test method D4208.
    2/28/1983 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:G04-1000

    This research report records the pertinent test data which resulted from an interlaboratory testing program conducted to assess the reproducibility of a given oxygen mechanical impact tester and among different testers of different designs. These testers constituted all the known tester facilities available at the time the round robin study was conducted. This research report acts as supporting data for test method G86.
    1/12/1983 - PDF - English - ASTM
    Learn More
    €63.00

  • WRC Volume 38 No. 05 1983

    Progress Reports Volume 38 No. 05 1983
    1/1/1983 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • WRC Volume 38 No. 03 1983

    Progress Reports Volume 38 No. 03 1983
    1/1/1983 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • ASTM Research Report RR:D32-1004

    Supporting Data for ASTM D4179, Test for Single Pellet Crush Strength of Formed Catalyst Shapes
    10/25/1982 - PDF - English - ASTM
    Learn More
    €95.55

  • ASTM Research Report RR:D02-1160

    An interlaboratory study was conducted by eight laboratories testing seven kerosene samples to establish a precision statement for test method D187.
    6/29/1982 - PDF - English - ASTM
    Learn More
    €89.25

  • ASTM Research Report RR:D02-1150

    A round robin was conducted by seven laboratories to establish supporting data for ASTM D2893.
    5/10/1982 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:E01-1088

    Interlaboratory Study to Establish Precision Statements for ASTM E478, Standard Test Methods for Chemical Analysis of Copper Alloys
    3/17/1982 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:E01-1077

    Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    2/5/1982 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1087

    Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    2/5/1982 - PDF - English - ASTM
    Learn More
    €50.40

  • ASTM Research Report RR:D11-1021

    An interlaboratory study was conducted to establish precision statements for ASTM D3900, Methods for Rubber, Raw Determination of Ethylene Units in EPM (Ethylene-Propylene Copolymers) and EPDM (Ethylene-Propylene-Diene Terpolymers).
    2/4/1982 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D11-1019

    An Interlaboratory Study was conducted to establish precision statements for ASTM D4075, Test for Compounding Materials-Flame Atomic Absorption Technique-Determination of Metals.
    8/20/1981 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D09-1009

    An interlaboratory test program was conducted to determine the precision that would result from the use of a test method for the bondability of insulated wire to potting compounds. This test method is for inclusion in ASTM D3032 on Hookup Wire Insulation. A joint test program was carried out with members of ASTM D9 Subcommittee 16 and the A-2H Committee of the Society of Automotive Engineers participating in specimen preparation and test. Four ASTM members and three A-2H members participated in the program.
    7/22/1981 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:D02-1135

    An interlaboratory study was conducted by fourteen laboratories testing two sample blends across three series to establish a precision statement for test method D2670.
    6/18/1981 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D09-1007

    Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
    4/7/1981 - PDF - English - ASTM
    Learn More
    €115.50

  • ASTM Research Report RR:D09-1007

    Research Report D09-1007 contains supporting data for ASTM D1676, Testing Film-Insulated Magnet Wire.
    4/1/1981 - - - ASTM
    Learn More
    From: €81.90

  • WRC Volume 36 No. 01 1981

    Progress Reports Volume 36 No. 01 1981
    1/1/1981 - PDF sécurisé - English - WRC
    Learn More
    €102.00

  • ASTM Research Report RR:D01-1026

    An interlaboratory study was conducted by fifteen laboratories testing fifteen samples to establish a precision statement for test method D2369.
    12/16/1980 - PDF - English - ASTM
    Learn More
    €115.50

  • ASTM Research Report RR:D20-1084

    An interlaboratory study was conducted by eleven laboratories testing four samples to establish a precision statement for test method D882.
    10/1/1980 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:E01-1083

    Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
    8/27/1980 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1084

    Interlaboratory Study to Establish Precision Statements for ASTM E353, Standard Test Methods for Chemical Analysis of Stainless, Heat- Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys
    8/27/1980 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1133

    An interlaboratory study was conducted by five laboratories testing ten samples to establish a precision statement for test method D3944.
    8/26/1980 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1074

    Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    1/9/1980 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D01-1020

    Interlaboratory Study to Establish Precision Statements for ASTM D1614, Test for Alkalinity in Acetone
    5/21/1979 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1108

    An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3342.
    4/25/1979 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D01-1016

    Interlaboratory Study to Establish Precision Statements for ASTM D3125, Test for Methyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters
    10/20/1978 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:E01-1070

    Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    9/8/1978 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1054

    An interlaboratory study was conducted to establish a precision statement for ASTM D3702. There were 5 labs with 4 tests each in Round Robin No. 1, 6 labs with 2 tests each in Round Robins No. 2a and 2b, and 2 labs with 6 tests each n Round Robin No. 3. Tests marked with * were used in calculations.
    8/18/1978 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1056

    An interlaboratory study was conducted by seven laboratories testing six samples to establish a precision statement for test method D3705.
    8/18/1978 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D02-1014

    An interlaboratory study was conducted by seven laboratories testing five samples to establish a precision statement for test method D3427.
    1/31/1978 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1067

    Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
    10/21/1977 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E05-1002

    An interlaboratory study was conducted by twenty one laboratories testing fifteen samples to establish a precision statement for test method E662.
    10/3/1977 - PDF - English - ASTM
    Learn More
    €81.90

  • ASTM Research Report RR:C08-1004

    The data analyzed in this report was collected in 1971 as part of a Round-Robin study of the test method C863 by five different laboratories, which tested three samples each of five different materials. The variable measured is percent volume expansion. The test temperature was 1100 degrees Celsius.
    7/19/1977 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D20-1064

    An interlaboratory study was conducted by three laboratories testing three materials to establish a precision statement for test method D570.
    7/19/1977 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D11-1012

    An Interlaboratory Study was conducted to establish precision statements for ASTM D3616, Test for Rubber, Raw - Determination of Gel, Swelling Index, and Dilute Solution Viscosity.
    7/6/1977 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1036

    An interlaboratory study was conducted by six laboratories testing fifteen samples to establish a precision statement for test method D3120.
    2/15/1977 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D02-1026

    An interlaboratory study was conducted by nine laboratories testing six samples to establish a precision statement for test method D943.
    8/24/1976 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1066

    Interlaboratory Study to Establish Precision Statements for ASTM E34, Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys
    8/4/1976 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:D02-1013

    An interlaboratory study was conducted by five laboratories testing seven samples to establish a precision statement for test method D2624. Three Ethyl and two Maihak meters were used to measure the electrical conductivity of each sample.
    9/11/1975 - PDF - English - ASTM
    Learn More
    €81.90

  • AGARDograph N° 205

    Review of Anthropometric Data of German Air Force and United States Air Force Flying Personnel 1967-1968.
    Advisory Group for Aerospace Research and Development Paris (France)
    4/1/1975 - PDF - English - NTIS
    Learn More
    €25.00

  • ASTM Research Report RR:D11-1004

    An Interlaboratory Study was conducted to establish precision statements for ASTM D471, Test for Change in Properties of Elastomeric Vulcanizates Resulting from Immersion in Liquids.
    4/22/1974 - PDF - English - ASTM
    Learn More
    €63.00

  • ASTM Research Report RR:D11-1000

    An Interlaboratory Study was conducted to establish precision statements for ASTM D297, Chemical Analysis of Rubber Products (Sulfur).
    9/24/1973 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E01-1062

    Interlaboratory Study to Establish Precision Statements for ASTM E350, Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron
    10/16/1972 - PDF - English - ASTM
    Learn More
    €56.70

  • ASTM Research Report RR:E15-0028

    An interlaboratory study was conducted by seven laboratories which analyzed mixtures of ethylene, diethylene, and triethylene glycols to establish a precision statement for test method D1209.
    1/4/1966 - PDF - English - ASTM
    Learn More
    €115.50

  • International Defense Budgets


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €2,295.00

  • U.S. Defense Budget Forecast


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €2,295.00

  • International Contractors


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €2,295.00

  • Industrial & Marine Gas Turbine Installations


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €13,500.00

  • Military Aircraft/Engine Inventories


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €4,950.00

  • Complete Aircraft/Engine Inventories (Commercial & Military)


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €8,120.00

  • Commercial Aircraft/Engine Inventories


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €4,950.00

  • Worldwide Missile Inventories


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €3,745.00

  • Complete Fighting Vehicle Inventories (Tracked & Wheeled)


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €4,200.00

  • World Tracked Fighting Vehicle Inventories


    3/28/2024 - Internet - English - FORECASTINTER
    Learn More
    €2,495.00

Items 3401 to 3600 of 3716 total

Set Ascending Direction
per page

List  Grid