Report
-
ASTM Research Report RR:F11-1017
An interlaboratory study which involved five laboratories and four central vacuum cleaning units was conducted to establish the precision and bias statement of test method F2544.
7/1/2006 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1591
An interlaboratory study was conducted by eighteen laboratories analyzing five oil samples to establish a precision statement for test method D7214.
6/13/2006 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E01-1060
An interlaboratory study was conducted by six laboratories which tested sixteen materials to establish the precision statement of test method E2465.
5/30/2006 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:B09-1012
An interlaboratory study was conducted to establish a precision statement for ferrous and copper base sintered parts for ASTM test method B328.
4/29/2006 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E12-1001
An interlaboratory study was conducted by two organizations which used sixteen instruments in nine different models to collect three replicate readings of twelve ceramic color standards so a precision statement could be established for test method E1349.
3/30/2006 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1603
An interlaboratory study to establish a precision statement for the free and total glycerin in test method D6584.
3/1/2006 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1604
An interlaboratory study was performed using 10 used and 5 fresh oil samples (viscosity range 25 to 150 mm2/s at 40�,C and 6 to 16 mm2/s at 100�,C) and 15 laboratories, to establish the precision statement in test method D7279.
3/1/2006 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D01-1134
An interlaboratory study was conducted for D1316 using Manual and Automatic (ADM-1) procedures of the test method in which one operator in each of seven labs used both manual and automatic (ADM-1) methods.
2/22/2006 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D02-1589
An interlaboratory study was conducted by nine laboratories testing six samples for small vials that ranged from 0.1% to 25% to establish a precision statement for test method D4530.
2/15/2006 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1587
An interlaboratory study was conducted by nine laboratories testing six gasoline samples and six diesel fuel samples to establish a precision and bias statement for test method D7212.
2/1/2006 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D20-1242
An interlaboratory study was conducted by ten laboratories testing four samples to establish a precision statement for the CIELAB color in test method D7133.
1/18/2006 - PDF - English - ASTM
Learn More€81.90 -
€150.00 -
ASTM Research Report RR:E37-1035
An interlaboratory study was conducted in which thirteen laboratories using four instrument models from two manufacturers tested calibration slope to establish the precision statement of test method E2206.
12/22/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E37-1036
An interlaboratory study was conducted by eight laboratories which tested two materials to establish the precision statement of test method E2403.
12/22/2005 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1584
An interlaboratory study was conducted to establish a precision statement for test method D5864. Five laboratories ran this study by testing ten different lubricants and base stocks.
12/13/2005 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E28-1026
An intralaboratory study was conducted by a single laboratory which tested six samples to establish a precision statement for test method E2448.
12/1/2005 - PDF - English - ASTM
Learn More€56.70 -
API OCTG04:2005
Report of Eastern/Western Hemisphere Production of Casing, Tubing, and Drill Pipe
11/1/2005 - PDF sécurisé - English - API
Learn More€185.00 -
ASTM Research Report RR:F04-1008
An interlaboratory study was conducted by seven laboratories which tested three materials to establish the precision statement of test method F2004.
10/1/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E01-1040
An interlaboratory study was conducted by ten laboratories which tested three materials to establish the precision statement of test method E1915.
9/27/2005 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:E37-1034
An interlaboratory study was conducted by twelve laboratories using six instrument models from three manufacturers to establish the precision statement of test method E2347.
9/12/2005 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:C16-1032
An interlaboratory study on the breaking load and flexural properties of block-type thermal insulation was conducted in 2005 to establish precision statements for C203. The eight laboratories participating in the study measured the breaking load/flexural property of five randomly selected samples of four different block-type EPS/XPS thermal insulations at two different cross-head speeds.
8/16/2005 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1580
An interlaboratory study was conducted to establish a bias statement for test method D86 by comparing the manual and the automated apparatus and procedures.
8/8/2005 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D02-1579
An interlaboratory study was run by laboratories testing lubricating test oils at 80�,C and 120�,C to establish a precision statement for test method D6425.
7/25/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D16-1034
An interlaboratory study performed by three laboratories which tested five materials to establish the precision statement of test method D6143.
7/20/2005 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:C09-1031
An interlaboratory study was conducted to establish precision values for nuclear gages operating in the direct transmission mode when testing unhardened concrete according to test method C1040.
7/19/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1592
A round robin was carried out in 2004 involving two EDXRF based methods based on (i) a low-background proportional detector and (ii) polarized source for sulfur determination in the range 1 to 60 mg/kg. This resulted from a recommendation from the 2002 round robin report of CEN TCI9 WG27 to investigate the precision of new generation EDXRF equipment once it became more widely available. Due to the interest in low level sulfur measurement ( 50 mg/kg and less) in fuels was becoming of increasing relevance in both Europe and the USA, it was decided to carry out a joint EI/ASTM exercise using fuels of interest sourced from both areas. Nine laboratories participated in the low-background proportional detector method and eleven laboratories in the polarization method.
6/29/2005 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:D02-1588
An interlaboratory study was conducted to establish a precision statement for test method D2624.
6/15/2005 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D02-1586
An interlaboratory study was run by eight laboratories testing ten samples to establish the precision statement of test method D7224.
6/6/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D18-1008
An interlaboratory study performed by three laboratories which tested three materials to establish the precision statement of test method D698.
6/2/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D18-1009
An interlaboratory study performed by three laboratories which tested four reference soils to establish the precision statement of test method D854.
6/2/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D18-1010
An interlaboratory study performed by three laboratories which tested four reference soils to establish the precision statement of test method D1140.
6/2/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D18-1011
An interlaboratory study was conducted by laboratories which tested soil samples of reference soil SP-1 to establish a precision statement for specifications D4253 and D4254.
6/2/2005 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D18-1013
An interlaboratory study performed by three laboratories which tested three materials to establish the precision statement of test method D4318.
6/2/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D19-1184
Interlaboratory Study to Establish Precision Statements for ASTM D7168, Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
6/1/2005 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D20-1244
An interlaboratory test was conducted by seven laboratories testing four samples to establish a precision statement for test method D7253. Each laboratory used a colorimetric endpoint titration for the generation of the data used to develop the statement.
6/1/2005 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F02-1022
An interlaboratory study was conducted by eight laboratories which tested five materials to establish the precision statement of test method D3985.
6/1/2005 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1575
An interlaboratory study was conducted to determine if a new Digital Conductivity Meter, Model 1153 was equivalent to the Emcee Model 1152 Digital Conductivity Meter. This study demonstrated that the two models were equivalent and the repeatability data that was obtained by this study is in the test method D2624.
5/24/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1582
An interlaboratory study was run by nine laboratories testing ten test oils to establish a precision statement for test method D7109.
5/19/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C09-1029
Interlaboratory Study to Establish Precision Statements for ASTM C1580, Standard Test Method for Water-Soluble Sulfate in Soil
5/4/2005 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1599
In an interlaboratory study, molybdenum was determined by analyzing ten oil and eight additive samples by participating laboratories so that a precision statement could be established for test method D4951.
5/1/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1577
This report documents two interlaboratory studies to generate precision data for test method D7171 for the determination of the mass percent of hydrogen in middle distillate petroleum products by low-resolution pulsed nuclear magnetic resonance spectroscopy.
4/19/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C16-1031
Research report C16-1031 describes an interlaboratory study performed by four laboratories that reports the warpage results to determine the precision and bias of C411.
4/7/2005 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1569
This report documents two interlaboratory studies to generate precision data for test method D7111 for quantitative analysis of trace elements in middle distillate fuels.
4/5/2005 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:C24-1055
Research Report C24-1055 establishes precision statements for C1635. Two interlaboratory studies were conducted. The first study had five laboratories test five sealants. The second study had five laboratories test two sealants.
3/24/2005 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:D13-1120
An interlaboratory study was conducted by eight laboratories testing four fabric samples to establish a precision statement for test method D7142.
3/4/2005 - PDF - English - ASTM
Learn More€81.90 -
API Publ 2383:2005
2004 Survey on Petroleum Industry Occupational Injuries, Illnesses, and Fatalities Summary Report: Aggregate Data Only
3/1/2005 - PDF sécurisé - English - API
Learn More€123.00 -
ASTM Research Report RR:D02-1593
An interlaboratory study was conducted involving thirteen laboratories and eight samples comprising three diesel fuels, two kerosines, two JetA/A1 fuels and hexadecane to establish a precision statement for test method D7236.
2/20/2005 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F02-1021
An interlaboratory study was conducted by eight laboratories which tested five materials to establish the precision statement of test method D3985.
2/3/2005 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C16-1029
An interlaboratory study was conducted at six laboratories testing seven samples to establish a precision statement for linear shrinkage tests in test methods C1427 and C534.
1/10/2005 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D27-1017
An Intralaboratory Study was conducted to estimate the repeatability by one laboratory for 7 replicates of a fluid containing a nominal 1 ppm by weight.
1/1/2005 - PDF - English - ASTM
Learn More€56.70 -
€102.00 -
€102.00
-
€102.00
-
€102.00
-
€102.00
-
ASME STP/PT-003-2005
Hydrogen Standardization Interim Report for Tanks, Piping, and Pipelines (STP/PT-003 - 2005)
1/1/2005 - PDF DRM - English - ASME
Learn More€38.00 -
ASTM Research Report RR:D02-1585
An interlaboratory study was conducted by ten cooperators testing two different solid bonded films to establish the precision statement for test method D7217.
12/22/2004 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1565
An interlaboratory study was conducted to establish a precision statement for Procedure B of test method D5706.
12/16/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:C09-1028
An interlaboratory study was conducted by eleven operators testing two concrete batches at around 75°, C to establish precision statements for test method C1064/C1064M.
12/15/2004 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:C09-1027
This report consists of analysis of the results from an interlaboratory study conducted to develop precision data for the tests covered by ASTM Test Method C 796. Three laboratories provided data that were analyzed using the ASTM Practice E 691 software.
12/9/2004 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1555
An interlaboratory study was conducted by twelve laboratories to establish a precision statement for test method D7042.
12/3/2004 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D19-1177
An interlaboratory study performed by eight laboratories which tested ten samples to establish the precision statement of test method D5673.
12/3/2004 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:D13-1119
An interlaboratory study was conducted by five laboratories which tested three materials to establish the precision statement of test method D5587.
10/28/2004 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F11-1016
An interlaboratory study was conducted by twelve laboratories which tested four materials to establish the precision statement of test method F888.
10/28/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D32-1040
An interlaboratory study was conducted by three laboratories which tested three materials to establish the precision statement of test method D7084.
10/27/2004 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D05-1029
An interlaboratory study was conducted to establish a precision statement for test method D6357.
10/22/2004 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D20-1243
An interlaboratory test was conducted by seven laboratories testing six samples to develop estimates of data on a precision and bias statement for test method D7252.
9/1/2004 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:G01-1021
An interlaboratory study was conducted by six laboratories which tested four materials to establish the precision statement of test method G180.
8/12/2004 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:C14-1004
An interlaboratory round robin testing was conducted in accordance with Practice E 691 to establish the precision and bias of edge stress measurement (Procedure B) for C1279.
8/1/2004 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1562
An interlaboratory study was run by six laboratories that analyzed forty-six samples to establish a precision statement for test method D7095.
7/30/2004 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1572
An interlaboratory study to establish the precision statement for test method D2386 was run by fifteen laboratories testing thirteen samples of fuel consisting of Jet A, Jet A1, JP-5 and JP-8.
7/20/2004 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D13-1118
An interlaboratory study was conducted by four laboratories testing four sewing thread and two mattress tapes to establish a precision statement for test method D7016.
7/16/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D01-1133
An interlaboratory study of test method D7189 was conducted in which one operator in each of four laboratories participated in round robin testing of five samples of news ink blacks of varying percentages of carbon black pigmentation.
6/24/2004 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D16-1033
An interlaboratory study performed by five laboratories which tested five materials to establish the precision statement of test method D7057.
6/3/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1581
An interlaboratory study was conducted involving eight laboratories and using two pure chemicals, eleven fuels and four lubricating oils, to establish the precision statement for test method D7094.
6/1/2004 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F11-1015
An interlaboratory study was conducted by six laboratories which tested seven materials to establish the precision statement of test method F2105.
5/10/2004 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:E28-1021
An interlaboratory study was conducted by fourteen laboratories which tested six materials to establish the precision statement of test method E18.
5/3/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D16-1032
This round robin was conducted in support of a revision of an existing test method, D3760, Analysis of Isopropyl Benzene (Cumene) by Capillary Gas Chromatography, to update the components identified and switch to calibration of the gas chromatography system by the external standard technique. The method was found to be applicable to the measurement of impurities such as nonaromatic hydrocarbons, benzene, toluene, ethylbenzene, phenol, cymenes, f-butylbenzene, n-butylbenzene, n-propyl benzene, alpha-methyl styrene, sec-butylbenzene, and diisopropylbenzenes. Five laboratories participated.
4/5/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:E01-1039
An interlaboratory study was conducted by nineteen laboratories which tested nine materials to establish the precision statement of test method E1335.
3/30/2004 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:E27-1006
An interlaboratory study was conducted by thirteen laboratories which tested Constant Temperature Stability of 1-phenyl-1H-tetrazole-5-thiol, known to decompose autocatalytically to establish the precision statement of test method E487.
3/17/2004 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:C16-1026
An interlaboratory study was conducted by five laboratories testing six different extraction solutions prepared from six different material types of insulation to establish a precision statement for test method C871.
3/12/2004 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D19-1176
An interlaboratory study was conducted by 21 laboratories which tested 24 materials to establish the precision statement of test method D7066.
3/10/2004 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:G01-1022
An interlaboratory study was conducted by seven individuals which tested three soil samples to establish the precision statement of test method G187.
1/29/2004 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:F02-1020
An interlaboratory study was conducted by three laboratories which tested non-lidded semirigid (PETE) thermoformed trays, and trays sealed with various porous barrier lidding materials to establish the precision statement of test method F2338.
1/20/2004 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D30-1005
An interlaboratory study was conducted by six laboratories testing six sets of twelve individual specimens to establish a precision statement for test method D6484.
1/1/2004 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E37-1032
An interlaboratory study was conducted in which eight laboratories characterized a poly(vinyl chloride) sample in to establish the precision statement of test method E2092.
12/18/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1552
An interlaboratory study was conducted by six laboratories testing nineteen samples to establish a precision statement for test method D7039. Only the repeatability precision estimate shown in this report is included in the publication of the test method.
12/13/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1570
An interlaboratory study was conducted by six laboratories testing seven sooted oils to establish the precision statement of test method D7710.
12/12/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1568
A round robin was conducted to support an upgrade to the viscometer head and software used in test method D5133.
12/11/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1551
An interlaboratory study was run by nineteen laboratories testing ten samples to establish a precision statement for test method D664.
12/4/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1567
An interlaboratory study was performed by eleven laboratories testing five oils to establish the precision statement for test method D7097.
12/1/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E37-1030
An interlaboratory study was conducted by fourteen laboratories testing two samples to establish a precision statement for test method E2160.
11/25/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E37-1031
An interlaboratory study was conducted by eight laboratories which tested the volatility rates for camphor at 333 K and squalane at 573 K were determined using the isothermal test to establish the precision statement of test method E2008.
11/25/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:F11-1014
An interlaboratory study was conducted by seven laboratories testing three samples to establish a precision statement for test method F608.
11/4/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D14-1011
An interlaboratory study was performed by five laboratories which tested one adhesive material according to ASTM D6004 and ASTM D686 to establish precision statements for D6004.
10/28/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C14-1003
An interlaboratory study to establish the precision for C1203. Six laboratories performed an analysis on four materials.
10/27/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F02-1018
An interlaboratory study was conducted by seven laboratories which tested eight materials to establish the precision statement of test method F2251.
10/27/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C16-1027
Research report C16-1027 describes an interlaboratory study that documents the estimate of repeatability in C1574.
9/10/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1598
An interlaboratory study was conducted involving nine laboratories and twelve middle distillate fuel samples to establish a precision statement for test method D5304.
9/1/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D20-1238
An interlaboratory study was conducted by eleven laboratories testing ten materials to establish a precision statement for test method D5132.
8/28/2003 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D14-1014
An intralaboratory study was conducted by one laboratory testing three samples to establish a repeatability statement for test method D1875.
8/15/2003 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1548
An interlaboratory study was performed by seven laboratories using two different types of Voltammograms to establish a precision statement for test method D6810.
7/28/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1546
An interlaboratory study was conducted by ten laboratories to establish a precision statement for test method D3120.
7/25/2003 - PDF - English - ASTM
Learn More€98.70 -
ASTM Research Report RR:D02-1547
An interlaboratory study was conducted by 56 laboratories testing sixteen samples of gasoline and diesel to establish precision statements for test methods D2622, D3120, and D5453.
7/25/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D04-1021
An interlaboratory study was conducted by laboratories testing five materials to establish a precision statement for test method D3549.
7/25/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D04-1026
An interlaboratory study was conducted by six laboratories to establish a precision statement for the test method, coefficient of luminous intensity, in standard specification D4280.
7/25/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D14-1010
An interlaboratory study was run in which test specimens of one material (latex-based elastomeric adhesive) was tested for Shear and Tensile strength in each of six laboratories with each laboratory testing one set of five specimens for each strength characteristic to establish precision statements for ASTM D6464.
7/25/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E37-1029
An interlaboratory study was conducted by thirteen laboratories which tested five materials to establish the precision statement of test method E2070.
7/25/2003 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D20-1236
An interlaboratory study was conducted by thirteen laboratories testing three materials to establish a precision statement for test method D2578.
7/9/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D16-1030
An interlaboratory study performed by six laboratories which tested ten materials to establish the precision statement of test method D5060.
6/25/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D16-1031
An interlaboratory study was conducted by six laboratories testing two samples to establish a precision statement for test method D5135.
6/25/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D20-1194
An interlaboratory study was conducted by six laboratories including eight materials to establish a precision statement for Vicat Softening Temperature Using Loading 2 and Heating Rate A for test method D1525.
6/25/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D20-1228
An interlaboratory study was conducted by nine laboratories testing three materials to establish a precision statement for test method D746.
6/25/2003 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D20-1237
An interlaboratory study was conducted by ten laboratories testing five rigid PVC dry blend compounds to establish a precision statement for the test method in standard practice D2538.
6/25/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:E27-1005
An interlaboratory study was conducted by ten laboratories which tested five materials to establish the precision statement of test method E2046.
6/25/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D20-1239
An interlaboratory study was conducted by seven laboratories testing four materials to establish a precision statement for test method D6979.
6/10/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F02-1019
An interlaboratory study was conducted by three laboratories testing samples to establish a precision statement for test method F2338.
5/15/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D02-1542
An interlaboratory study was conducted by eight operators testing nine identical samples to establish a precision statement for test method D6824.
5/6/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1544
An interlaboratory study was conducted to establish a precision statement for test method D6839.
5/6/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:F06-1008
An interlaboratory study was conducted by six laboratories testing four samples to establish a precision statement for test method F137 and F2055.
5/6/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D13-1108
An interlaboratory test was run in 1994 through 1995 in which three randomly-drawn samples were tested in five difference laboratories as directed in D2261. Two operators in each laboratory each tested eight specimens of each material. Four of the eight specimens were tested on one day and four specimens were tested on the second day.
4/24/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D13-1109
An interlaboratory study was conducted by eight laboratories testing three woven fabrics and six laboratories testing eight nonwoven fabrics to establish a precision statement for test method D737.
4/24/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D13-1110
An interlaboratory test was run in 1994 through 1995 in which randomly drawn samples were tested as directed in the five options of D1777. Six laboratories participated, each testing five materials. Two operators in each laboratory each tested ten specimens of each material. Five of the ten specimens were tested on one day and five were tested on a second day.
4/24/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D13-1111
An interalaboratory study was conducted by six laboratories testing five samples to establish a precision statement for test method D1388.
4/24/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D27-1015
An interlaboratory study was conducted by twelve laboratories which tested four materials to establish the precision statement of test method D924.
4/16/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D01-1127
An interlaboratory study of the iodine value of two tall oil fatty acids using two different solvents, was run in 2000 for test method D5768.
3/31/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1537
An interlaboratory study was conducted by nine laboratories performing hydroperoxide analyses on a total of seven different samples to establish a precision statement for test method D6447.
3/31/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1539
An interlaboratory study was run at six labs using six oils to establish a precision and bias statement for test method B for D2893.
3/31/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1540
An interlaboratory study was run by six laboratories testing twelve samples to establish a precision statement for test method D6426.
3/31/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D19-1172
An interlaboratory study was conducted by seven laboratories testing standard turbidity and real world turbidity samples to establish a precision statement for test method D6855.
3/31/2003 - PDF - English - ASTM
Learn More€63.00 -
NACE 1D191-2003
A Review of Screening Tests for Gypsum Scale Removal Chemicals
3/1/2003 - PDF - English - NACE
Learn More€192.00 -
ASTM Research Report RR:D22-1030
An interlaboratory study was conducted by thirteen laboratories testing thirteen sets of glass-fiber filters spiked with four levels of TDIP to establish a precision statement for test method D5836.
2/18/2003 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:C07-1004
An interlaboratory study, consistent with the guidelines of Practice E 691, was conducted in June 2000, to establish precision statements for C110. The test for specific gravity was conducted in accordance with these test methods, Section 21.
2/12/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D19-1171
An interlaboratory study was conducted by seven laboratories which tested three materials to establish the precision statement of test method D6239.
2/12/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:E37-1028
An interlaboratory study was conducted by twelve laboratories which tested five materials to establish the precision statement of test method E2041.
2/12/2003 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:E01-1037
An interlaboratory study was conducted by eight laboratories which tested six materials to establish the precision statement of test method E2242.
1/15/2003 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D27-1016
An interlaboratory study was conducted by laboratories testing five standard gas-in-oil samples to establish a precision statement for test method D3612.
1/14/2003 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D34-1014
To establish precision statements for ASTM D6418, RR D34-1014 describes 4 studies that were performed to evaluate the performance of the En Core sampler for storage of soil samples spiked with VOCs.
1/10/2003 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:F07-1007
An interlaboratory study was conducted by three laboratories which tested sixteen materials to establish the precision statement of test method F548.
1/10/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F07-1008
An interlaboratory study was conducted by seven laboratories which tested twelve materials to establish the precision statement of test method F428.
1/10/2003 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D02-1530
An interlaboratory study was conducted by eight laboratories which tested nine samples by using filters with pore sizes of 0.8um and 0.65um to establish a precision statement for test method D6824.
1/8/2003 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E15-1060
An interlaboratory study was conducted by six laboratories which tested two materials to establish the precision statement of test method E1787.
1/8/2003 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F02-1017
An interlaboratory study was conducted by seven laboratories which tested thirteen materials to establish the precision statement of test method F2203.
1/8/2003 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:D04-1020
An interlaboratory study was conducted by twenty-one laboratories testing twenty-seven samples to establish a precision statement for test method D6752.
1/1/2003 - PDF - English - ASTM
Learn More€95.55 -
€102.00
-
€102.00
-
€102.00
-
€102.00
-
ASTM Research Report RR:D02-1559
An interlaboratory study was run by ten laboratories testing nine samples to establish a precision statement for test method D7040.
12/11/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F02-1029
Research Report F02-1029 presents the results of the Interlaboratory Study used to establish the establish the precision and bias statement for ASTM D3078-02, Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission. The collaborative study included 3 labs who used method D3078 to detect controlled leaks at three vacuum levels. The research report presents summary method performance statistics as well as the measurement data used to calculate results for the study.
12/10/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1558
An interlaboratory study was run by nine laboratories testing eight gasoline samples and eight diesel samples to establish a precision statement for test method D7041.
11/20/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D13-1113
An interlaboratory study was conducted by two laboratories testing three fabric samples to establish a precision statement for test method D7024.
11/18/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:F06-1007
An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F2199.
9/27/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1594
An interlaboratory study was conducted to establish a precision statement for test method D6895. This report summarizes two round robins utilizing the same procedure and different materials.
9/23/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D19-1173
An interlaboratory study performed by ten laboratories which tested six samples to establish the precision statement of test method D6888.
9/10/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:C26-1011
An interlaboratory study was conducted by a single laboratory testing three samples to establish a precision statement for test method C1539.
8/22/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D02-1528
An interlaboratory study was conducted by six laboratories testing three different anti-wear hydraulic oils to establish a precision statement for test method D4310.
8/22/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F23-1005
An interlaboratory study was conducted by six laboratories which tested three fabric samples to establish the precision statement of test method F1868.
8/22/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E27-1003
An interlaboratory study was conducted by six laboratories which tested trityl azide in quintuplicate to establish the precision statement of test method E537.
7/11/2002 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:D05-1030
An interlaboratory study was conducted by six laboratories to establish a precision statement for test method D6721.
7/9/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D01-1126
An interlaboratory study of the test method D6762 was conducted by six laboratories to determine precision.
7/8/2002 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1524
An interlaboratory study was conducted to establish precision statements for the four standard ASTM Cloud point methods: D2500, D5771, D5772 and D5773. Participants analyzed eleven sample sets comprised of two petroleum distillate fuels, diesel and kerosene, with various biodiesel fuels with a temperature range from +10 to ?45�,C.
7/3/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1525
An interlaboratory study was conducted by ten laboratories testing fourteen fuel samples to establish a precision statement for test method D1840.
7/3/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1518
An interlaboratory study was conducted by six laboratories testing twelve samples to establish a precision statement for test method D6730.
7/2/2002 - PDF - English - ASTM
Learn More€115.50 -
ASTM Research Report RR:D02-1527
An interlaboratory study was conducted by eleven laboratories testing fifteen samples to establish a precision statement for test method D4629.
6/19/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D26-1018
An interlaboratory study was conducted by three laboratories testing standards made up in perchloroethylene with components ranging from 2 ppm to 93 wt.% so a precision statement could be established for practice D6806.
6/10/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D05-1028
An interlaboratory study was conducted by eight laboratories testing nine coal samples, one coke samples, and one lignite samples to establish a precision statement for test method D5865.
5/28/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E01-1035
An interlaboratory study was conducted by nine laboratories which tested nine materials to establish the precision statement of test method E2209.
5/28/2002 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:A06-1002
An interlaboratory study was conducted with three blended Epstein specimens of ASTM Type 64D430 material that were circulated to 23 participating laboratories to determine precision and bias when testing CRML steel.
5/20/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D32-1039
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method D6761.
5/20/2002 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:E15-1059
An interlaboratory study was conducted by seven laboratories which tested two materials to establish the precision statement of test method E1863.
5/20/2002 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:F06-1006
An interlaboratory study was conducted by six laboratories which tested five materials to establish the precision statement of test method F410.
5/20/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1522
An interlaboratory study was conducted where laboratories used seven instruments to test thirteen middle distillate fuel samples to establish a precision statement for test method D6748.
5/13/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D16-1029
An interlaboratory study was conducted by fifteen laboratories testing samples of Toluene, Xylene, and Cresol to establish a precision statement for test method D850.
5/13/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E37-1037
An interlaboratory study was conducted by ten laboratories testing a single 0.025 mm thick film sample of polystyrene to establish a precision statement for test method E1824.
5/10/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F17-1048
An interlaboratory study was conducted by six laboratories testing pellets of polyethylene resin to establish a precision statement for test method F2231.
4/22/2002 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1521
An interlaboratory study was conducted where participants analyzed four sets of undyed base fuels and twelve sets of dyed base fuel/color to establish the precision statement for test method D6756.
4/18/2002 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:E15-1047
An interlaboratory study was conducted by ten laboratories testing three samples containing approximately 80, 90, and 95% mass sulfuric acid to establish a precision statement for test methods E223.
4/5/2002 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:E37-1027
An interlaboratory study was conducted by seven laboratories. Each laboratory characterized in hextuplicate a commercially available polyethylene Oxidation Induction Time (OIT) reference material to establish the precision statement of test method E2009.
3/3/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D05-1026
An interlaboratory study that was conducted to establish a precision statement for two proposed alternative methods for mercury in coal, D6414 and D6722, and to re-evaluate the precision of test method D3684.
2/20/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D16-1028
An interlaboratory study was conducted to provide a full thermistor precision statement for ASTM D852. One laboratory determined the solidification point of a benzene sample twelve times. Seven different laboratories determined the solidification point of three different benzene samples in triplicate on two different days.
2/20/2002 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:F07-1006
An interlaboratory study was conducted by nineteen laboratories measuring computer generated curves and actual photos through aircraft windscreens to establish a precision statement for test method F2156.
2/20/2002 - PDF - English - ASTM
Learn More€95.55 -
ASTM Research Report RR:F11-1013
An interlaboratory study was conducted by eight laboratories testing three samples to establish a precision statement for test method F608.
1/29/2002 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:F23-1006
An interlaboratory study was conducted by six laboratories which tested three materials to establish the precision statement of test method F2298.
1/1/2002 - PDF - English - ASTM
Learn More€56.70 -
€102.00
-
€102.00
-
ASTM Research Report RR:D02-1517
An interlaboratory study was conducted by laboratories to determine the precision of Mini-Rotary Viscometer yield stress and viscosity of highly sooted diesel engine oils for test method D4684.
12/7/2001 - PDF - English - ASTM
Learn More€102.90 -
ASTM Research Report RR:D14-1009
An interlaboratory study was run in which test specimens of one material (solvent-based elastomeric adhesive) was tested for Dry Shear strength in each of six laboratories to establish the precision statement of test method D3498.
11/21/2001 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:E01-1033
An interlaboratory study was conducted by six laboratories which tested two materials to establish the precision statement of test method E248.
11/21/2001 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1508
An interlaboratory study was conducted by ten laboratories testing eleven different samples to evaluate the precision of test method D5771.
10/11/2001 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1509
An interlaboratory study was conducted by five laboratories testing eleven samples to evaluate the precision of test method D5772.
10/11/2001 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1510
An interlaboratory study was conducted by ten laboratories testing eleven samples to evaluate the precision of test method D5273.
10/11/2001 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1511
An interlaboratory study was conducted by thirteen laboratories testing eight oils to establish a precision statement for test method D5133. The samples measured in the study covered the viscosity range from 5000 to 40,000 mPa(s).
10/11/2001 - PDF - English - ASTM
Learn More€81.90 -
ASTM Research Report RR:D02-1512
An interlaboratory study was conducted by thirteen laboratories testing six samples to establish a precision statement for test method D6732.
10/11/2001 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D02-1514
An interlaboratory study was conducted by seven laboratories testing twelve fuel samples to establish a precision statement for test method D6728.
10/11/2001 - PDF - English - ASTM
Learn More€89.25 -
ASTM Research Report RR:D26-1016
An interlaboratory study was conducted by seven laboratories to establish a precision statement for Method A and Method B in standard D2989.
10/2/2001 - PDF - English - ASTM
Learn More€56.70 -
ASTM Research Report RR:D26-1017
An interlaboratory study was conducted by laboratories testing a standard of 9.8 ppm olive oil in trichloroethylene to establish a precision statement for test methods D and E of D2109.
10/2/2001 - PDF - English - ASTM
Learn More€63.00 -
ASTM Research Report RR:D04-1019
An Inter-Laboratory Study was conducted to establish precision statements for ASTM D6703, Standard Test Method for Automated Heithaus Titrimetry.
9/5/2001 - PDF - English - ASTM
Learn More€56.70 -
NACE 5A171-2001
Materials for Receiving, Handling, and Storing Hydrofluoric Acid
9/1/2001 - PDF - English - NACE
Learn More€192.00 -
ASTM Research Report RR:D05-1025
An Interlaboratory Study was conducted to establish precision statements for ASTM D5865, Standard Test Method for Gross Calorific Value of Coal and Coke. A ruggedness test trial (T1) completed in the year 2000 confirmed that disks made of quartz fiber are suitable for this purpose. A modification to the design of the quartz fisks tested in trial (T2), which eliminates contact of the coke sample with the sides of the combustion crucible reduced the variability of the results.
8/9/2001 - PDF - English - ASTM
Learn More€56.70
