91.140.80 : Drainage systems
-
DIN CEN/TS 14632:2024-04
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
4/1/2024 - PDF - German - DIN
Learn More€92.43 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - Spanish - AENOR
Learn More€88.00 -
UNE-EN 1401-1:2020+A1:2024
Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
3/20/2024 - PDF - English - AENOR
Learn More€105.60 -
DIN CEN/TS 1455-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity, German version CEN/TS 1455-2:2023.
3/1/2024 - PDF - German - DIN
Learn More€68.60 -
DIN CEN/TS 1566-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity, German version CEN/TS 1566-2:2023.
3/1/2024 - PDF - German - DIN
Learn More€68.60 -
DIN CEN/TS 1329-2:2024-03
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1329-2:2021
3/1/2024 - PDF - German - DIN
Learn More€92.62 -
NBN ISO 4633:2023
Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials ISO 4633:2023
12/21/2023 - PDF - English - NBN
Learn More€121.00 -
UNE-EN 1455-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - Spanish - AENOR
Learn More€86.00 -
UNE-EN 1455-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - English - AENOR
Learn More€103.20 -
UNE-EN 1566-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - Spanish - AENOR
Learn More€89.00 -
UNE-EN 1566-1:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/20/2023 - PDF - English - AENOR
Learn More€106.80 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - Spanish - AENOR
Learn More€85.00 -
UNE-EN ISO 11296-9:2023
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
12/20/2023 - PDF - English - AENOR
Learn More€102.00 -
UNE-EN 607:2023
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
11/22/2023 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN 607:2023
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing
11/22/2023 - PDF - English - AENOR
Learn More€84.00 -
PD CEN/TS 1455-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
11/6/2023 - PDF - English - BSI
Learn More€326.00 -
UNE-CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
11/3/2023 - PDF - English - AENOR
Learn More€76.00 -
PD CEN/TS 1566-2:2023 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
11/3/2023 - PDF - English - BSI
Learn More€326.00 -
DIN EN 1455-1:2023-11
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system, German version EN 1455-1:2022
11/1/2023 - PDF - German - DIN
Learn More€104.95 -
DIN EN 1566-1:2023-11
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system, German version EN 1566-1:2022
11/1/2023 - PDF - German - DIN
Learn More€110.00 -
ASTM A888-23
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
11/1/2023 - PDF - English - ASTM
Learn More€100.00 -
ASTM A888-23 + Redline
Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
11/1/2023 - PDF - English - ASTM
Learn More€119.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
10/31/2023 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
10/31/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
10/31/2023 - PDF - English - AENOR
Learn More€72.00 -
PD CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Assessment of conformity
10/19/2023 - PDF - English - BSI
Learn More€250.00 -
CEN/TS 1455-2:2023
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 2: Beurteilung der Konformität
10/18/2023 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1566-2:2023
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 2: Beurteilung der Konformität
10/18/2023 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1455-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 2: Assessment of conformity
10/18/2023 - PDF - English - NBN
Learn More€121.00 -
CEN/TS 1566-2:2023
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 2: Assessment of conformity
10/18/2023 - PDF - English - NBN
Learn More€121.00 -
NBN ISO 4982:2023
Plastics piping systems for non-pressure underground conveyance and storage of non-potable water — Arch-shaped, corrugated wall chambers made of PE or PP used for retention, detention, storage and transportation of storm water systems — Product specifications and performance criteria ISO 4982:2023
10/17/2023 - PDF - English - NBN
Learn More€163.00 -
ASTM C1920-23
Standard Practice for Cleaning of Vitrified Clay Sanitary Sewer Pipelines
10/1/2023 - PDF - English - ASTM
Learn More€52.00 -
ASTM C1920-23 + Redline
Standard Practice for Cleaning of Vitrified Clay Sanitary Sewer Pipelines
10/1/2023 - PDF - English - ASTM
Learn More€63.00 -
DIN EN ISO 13267:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022), German version EN ISO 13267:2023
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13268:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022), German version EN ISO 13268:2023
9/1/2023 - PDF - German - DIN
Learn More€72.80 -
DIN EN ISO 13266:2023-09
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022), German version EN ISO 13266:2023
9/1/2023 - PDF - German - DIN
Learn More€59.63 -
DIN EN 14366-1:2023-09
Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations, German version EN 14366-1:2023
9/1/2023 - PDF - German - DIN
Learn More€104.95 -
BS ISO 4633:2023
Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
9/1/2023 - PDF - English - BSI
Learn More€180.00 -
DIN CEN/TS 1519-2:2023-08
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1519-2:2020.
8/1/2023 - PDF - German - DIN
Learn More€63.64 -
DIN EN ISO 23856:2023-08
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021), German version EN ISO 23856:2021.
8/1/2023 - PDF - German - DIN
Learn More€158.04 -
DIN EN 1519-1:2023-08
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system, German version EN 1519-1:2019 + AC:2021
8/1/2023 - PDF - German - DIN
Learn More€104.95 -
BS EN 14366-1:2023 + Redline
Tracked Changes. Laboratory measurement of airborne and structure-borne sound from service equipment Application rules for waste water installations
7/27/2023 - PDF - English - BSI
Learn More€382.00 -
BS EN 14366-1:2023
Laboratory measurement of airborne and structure-borne sound from service equipment Application rules for waste water installations
7/25/2023 - PDF - English - BSI
Learn More€293.00 -
NBN EN 14366-1:2023
Mesurage en laboratoire des bruits aériens et structuraux des équipements techniques - Partie 1 : Règles d’application aux installations d’évacuation des eaux usées
7/19/2023 - PDF - French - NBN
Learn More€142.00 -
NBN EN 14366-1:2023
Bauakustik - Messung von Luftschall und Körperschall von gebäudetechnischen Anlagen im Prüfstand - Teil 1: Anwendungsregeln für Abwasserinstallationen
7/19/2023 - PDF - German - NBN
Learn More€142.00 -
NBN EN 14366-1:2023
Laboratory measurement of airborne and structure-borne sound from service equipment - Part 1: Application rules for waste water installations
7/19/2023 - PDF - English - NBN
Learn More€142.00 -
PD CEN/TS 14632:2023 + Redline
Tracked Changes. Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
7/5/2023 - PDF - English - BSI
Learn More€382.00 -
UNE-EN 1253-6:2023
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
7/5/2023 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 1253-6:2023
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
7/5/2023 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 1253-7:2023
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
7/5/2023 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-EN 1253-7:2023
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
7/5/2023 - PDF - English - AENOR
Learn More€93.60 -
UNE-EN 1253-8:2023
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
7/5/2023 - PDF - Spanish - AENOR
Learn More€79.00 -
UNE-EN 1253-8:2023
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
7/5/2023 - PDF - English - AENOR
Learn More€94.80 -
PD CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
6/30/2023 - PDF - English - BSI
Learn More€293.00 -
CEN/TS 14632:2023
Kunststoff-Rohrleitungssysteme für Wasserversorgung, Entwässerungssysteme und Abwasserleitungen mit und ohne Druck - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) - Empfehlungen für die Beurteilung der Konformität
6/29/2023 - PDF - German - NBN
Learn More€163.00 -
CEN/TS 14632:2023
Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
6/29/2023 - PDF - English - NBN
Learn More€163.00 -
BS EN 1566-1:2022 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
6/8/2023 - PDF - English - BSI
Learn More€432.00 -
DIN EN 1329-1:2023-06
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system, German version EN 1329-1:2020
6/1/2023 - PDF - German - DIN
Learn More€115.33 -
DIN EN 1253-6:2023-06
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm, German version EN 1253-6:2022
6/1/2023 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1253-7:2023-06
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure, German version EN 1253-7:2022
6/1/2023 - PDF - German - DIN
Learn More€99.35 -
DIN EN 1253-8:2023-06
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal, German version EN 1253-8:2022
6/1/2023 - PDF - German - DIN
Learn More€99.35 -
ASTM C1802-23
Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
5/1/2023 - PDF - English - ASTM
Learn More€78.00 -
ASTM C1802-23 + Redline
Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
5/1/2023 - PDF - English - ASTM
Learn More€93.00 -
NF EN 1401-1/IN1, P16-352-1/IN1 (04/2023)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
4/1/2023 - Paper - French - AFNOR
Learn More€23.00 -
NF EN 1401-1+A1, P16-352-1 (04/2023)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Poly(chlorure de vinyle) non plastifié (PVC-U) - Partie 1 : spécifications pour tubes, raccords et le système
4/1/2023 - Paper - French - AFNOR
Learn More€99.33 -
BS EN 1455-1:2022 + Redline
Tracked Changes. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
3/21/2023 - PDF - English - BSI
Learn More€382.00 -
BS EN 1566-1:2022
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Chlorinated poly(vinyl chloride) (PVC-C) Specifications pipes, fittings system
3/13/2023 - PDF - English - BSI
Learn More€331.00 -
BS EN 1455-1:2022
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Specifications pipes, fittings system
3/9/2023 - PDF - English - BSI
Learn More€293.00 -
DIN EN ISO 11296-9:2023-03
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022), German version EN ISO 11296-9:2022
3/1/2023 - PDF - German - DIN
Learn More€110.00 -
23/30437565 DC:2023
BS ISO 13265. Thermoplastics piping systems for non-pressure underground drainage and sewerage. Joints for buried non-pressure applications. Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure
2/8/2023 - PDF - English - BSI
Learn More€24.00 -
BS EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of resistance against surface and traffic loading
2/2/2023 - PDF - English - BSI
Learn More€180.00 -
ASTM F2764/F2764M-23
Standard Specification for 6?in. to 60 in. [150?mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
2/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM F2764/F2764M-23 + Redline
Standard Specification for 6?in. to 60 in. [150?mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
2/1/2023 - PDF - English - ASTM
Learn More€65.00 -
BS EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics shafts or risers for inspection chambers and manholes. Determination of ring stiffness
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
BS EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics inspection chamber and manhole bases. Test methods for buckling resistance
1/25/2023 - PDF - English - BSI
Learn More€180.00 -
NBN EN ISO 13266:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la résistance aux charges de remblai et de circulation (ISO 13266:2022)
1/15/2023 - PDF - French - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de fond de boîtes d'inspection et de branchement et de regards thermoplastiques - Méthode d'essai de résistance au flambage (ISO 13267:2022)
1/15/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Widerstandsfähigkeit gegen Belastungen der Oberfläche und Verkehrslasten (ISO 13266:2022)
1/15/2023 - PDF - German - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Böden von Kontroll- und Einsteigschächten aus Thermoplasten - Prüfverfahren für die Widerstandsfähigkeit gegen Einbeulen (ISO 13267:2022)
1/15/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13266:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of resistance against surface and traffic loading (ISO 13266:2022)
1/15/2023 - PDF - English - NBN
Learn More€37.00 -
NBN EN ISO 13267:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance (ISO 13267:2022)
1/15/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Systèmes de canalisations thermoplastiques pour branchements et collecteurs d'assainissement enterrés sans pression - Éléments de rehausse thermoplastiques pour boîtes d'inspection et de branchement et regards - Détermination de la rigidité annulaire (ISO 13268:2022)
1/14/2023 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Kunststoff-Rohrleitungssysteme aus Thermoplasten für erdverlegte drucklose Abwasserkanäle und -leitungen - Schachtringe und Steigrohre für Kontroll- und Einsteigschächte aus Thermoplasten - Bestimmung der Ringsteifigkeit (ISO 13268:2022)
1/14/2023 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13268:2023
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics shafts or risers for inspection chambers and manholes - Determination of ring stiffness (ISO 13268:2022)
1/14/2023 - PDF - English - NBN
Learn More€58.00 -
NBN EN 1566-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorure de vinyle) chloré (PVC-C) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
12/15/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1455-1:2022
Systèmes de canalisations en plastique pour l’évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que pour le système
12/15/2022 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1566-1:2022
Kunststoff- Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Chloriertes Polyvinylchlorid (PVC-C) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
12/15/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 1455-1:2022
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Acrylnitril-Butadien-Styrol (ABS) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
12/15/2022 - PDF - German - NBN
Learn More€163.00 -
NBN EN 1566-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: Specifications for pipes, fittings and the system
12/15/2022 - PDF - English - NBN
Learn More€163.00 -
NBN EN 1455-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1: Specifications for pipes, fittings and the system
12/15/2022 - PDF - English - NBN
Learn More€163.00 -
NF EN 1455-1, T54-914-1 (12/2022)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Acrylonitrile-butadiene-styrene (ABS) - Part 1 : Requirements for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Acrylonitrile-butadiène-styrène (ABS) - Partie 1 : Spécifications pour tubes, raccords ainsi que
12/1/2022 - Paper - French - AFNOR
Learn More€108.33 -
NF EN 1566-1, T54-919-1 (12/2022)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1 : Requirements for pipes, fittings and the system
12/1/2022 - Paper - French - AFNOR
Learn More€108.33 -
BS EN 1253-6:2022
Gullies for buildings Trapped floor gullies with a depth of water seal less than 50 mm
11/1/2022 - PDF - English - BSI
Learn More€250.00 -
BS EN 1253-7:2022
Gullies for buildings Trapped floor gullies with mechanical closure
11/1/2022 - PDF - English - BSI
Learn More€293.00 -
BS EN 1253-8:2022
Gullies for buildings Trapped floor gullies with combined mechanical closure and water seal
11/1/2022 - PDF - English - BSI
Learn More€293.00 -
ASTM A1109-22
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English - ASTM
Learn More€54.00 -
ASTM A1109-22 + Redline
Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications
11/1/2022 - PDF - English - ASTM
Learn More€65.00 -
BS ISO 23711:2022
Elastomeric seals. Requirements for materials for pipe joint seals used in water and drainage applications. Thermoplastic elastomers
10/31/2022 - PDF - English - BSI
Learn More€180.00 -
NBN EN 1253-8:2022
Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d’eau
10/28/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 1253-7:2022
Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
10/28/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 1253-6:2022
Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d’eau inférieure à 50 mm
10/28/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN 1253-8:2022
Abläufe für Gebäude - Teil 8: Bodenabläufe mit Geruchverschluss mit einer Kombination aus mechanischem Geruchverschluss und Sperrwasser
10/28/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 1253-7:2022
Abläufe für Gebäude - Teil 7: Bodenabläufe mit mechanischem Geruchverschluss
10/28/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 1253-6:2022
Abläufe für Gebäude - Teil 6: Bodenabläufe mit Geruchverschluss mit einer Sperrwasserhöhe von weniger als 50 mm
10/28/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN 1253-8:2022
Gullies for buildings - Part 8: Trapped floor gullies with combined mechanical closure and water seal
10/28/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 1253-7:2022
Gullies for buildings - Part 7: Trapped floor gullies with mechanical closure
10/28/2022 - PDF - English - NBN
Learn More€142.00 -
NBN EN 1253-6:2022
Gullies for buildings - Part 6: Trapped floor gullies with a depth of water seal less than 50 mm
10/28/2022 - PDF - English - NBN
Learn More€142.00 -
BS EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with a rigidly anchored plastics inner layer
10/17/2022 - PDF - English - BSI
Learn More€293.00 -
NBN EN ISO 11296-9:2022
Systèmes de canalisations en plastique pour la rénovation des réseaux de branchements et de collecteurs d'assainissement enterrés sans pression - Partie 9: Tubage par coffrage plastique interne rigidement ancré (ISO 11296-9:2022)
10/13/2022 - PDF - French - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Kunststoff-Rohrleitungssysteme für die Renovierung von erdverlegten drucklosen Entwässerungsnetzen (Freispiegelleitungen) - Teil 9: Lining mit einer fest verankerten Kunststoffauskleidung (ISO 11296-9:2022)
10/13/2022 - PDF - German - NBN
Learn More€142.00 -
NBN EN ISO 11296-9:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022)
10/13/2022 - PDF - English - NBN
Learn More€142.00 -
NF EN 1852-1+A1, P16-357-1 (10/2022)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène (PP) - Partie 1 : spécifications pour tubes, raccords et le système
10/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 1253-7, P16-330-7 (10/2022)
Avaloirs et siphons pour bâtiments - Partie 7 : Siphons de sol avec obturateur mécanique
10/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 1253-6, P16-330-6 (10/2022)
Avaloirs et siphons pour bâtiments - Partie 6 : Siphons de sol avec garde d'eau inférieure à 50 mm
10/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
NF EN 1253-8, P16-330-8 (10/2022)
Avaloirs et siphons pour bâtiments - Partie 8 : Siphons de sol combinant un obturateur mécanique et une garde d'eau
10/1/2022 - Paper - French - AFNOR
Learn More€99.33 -
NF EN 1852-1/IN1, P16-357-1/IN1 (10/2022)
Systèmes de canalisations en plastique pour les branchements et les collecteurs d'assainissement enterrés sans pression - Polypropylène (PP) - Partie 1 : spécifications pour tubes, raccords et le système
10/1/2022 - Paper - French - AFNOR
Learn More€23.00 -
22/30434611 DC:2022
BS ISO 4633. Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
9/13/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN 476:2022 + Redline
Tracked Changes. General requirements for components used in drains and sewers
9/13/2022 - PDF - English - BSI
Learn More€382.00 -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - Spanish - AENOR
Learn More€103.00 -
UNE-EN 877:2022
Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods
6/8/2022 - PDF - English - AENOR
Learn More€123.60 -
DIN 3603:2022-06
Test methods for cyclic load change internal pressure tests for the renovation and repair of sewage pressure pipe systems
6/1/2022 - PDF - German - DIN
Learn More€72.80 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 11296-7:2022
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019)
5/25/2022 - PDF - English - AENOR
Learn More€88.80 -
BS EN 476:2022
General requirements for components used in drains and sewers
5/13/2022 - PDF - English - BSI
Learn More€293.00 -
BS 4660:2022 + Redline
Tracked Changes. Thermoplastics ancillary fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage. Specification
5/5/2022 - PDF - English - BSI
Learn More€326.00 -
BS 4660:2022
Thermoplastics ancillary fittings of nominal sizes 110 and 160 for belowground gravity drainage and sewerage. Specification
4/26/2022 - PDF - English - BSI
Learn More€250.00 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - Spanish - AENOR
Learn More€90.00 -
UNE-EN 1329-1:2022
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
4/13/2022 - PDF - English - AENOR
Learn More€108.00 -
NF EN 476, P16-100 (04/2022)
General requirements for components used in drains and sewers
4/1/2022 - Paper - French - AFNOR
Learn More€86.67 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - Spanish - AENOR
Learn More€124.00 -
UNE-EN ISO 23856:2022
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
3/23/2022 - PDF - English - AENOR
Learn More€148.80 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 13259:2022
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
3/9/2022 - PDF - English - AENOR
Learn More€75.60 -
UNE 149002:2022
Acceptance criteria for disposable products via toilet.
2/16/2022 - PDF - Spanish - AENOR
Learn More€83.00 -
22/30445293 DC:2022
BS EN 14366-1. Laboratory measurement of airborne and structure-borne sound from service equipment Part 1. Application rules for waste water installations
1/27/2022 - PDF - English - BSI
Learn More€24.00 -
BS EN 12405-1:2021 + Redline
Tracked Changes. Gas meters. Conversion devices Volume conversion
12/10/2021 - PDF - English - BSI
Learn More€559.00 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1519-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 1: Requirements for pipes, fittings and the system
11/10/2021 - PDF - English - AENOR
Learn More€99.60 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
11/3/2021 - PDF - English - AENOR
Learn More€62.40 -
DIN EN ISO 11296-4:2021-11
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018 + Amd 1:2021), German version EN ISO 11296-4:2018 + A1:2021
11/1/2021 - PDF - German - DIN
Learn More€131.96 -
€430.00
-
NF EN 877, A48-720 (10/2021)
Cast iron pipes systems for the evacuation of water from works - Characteristics and test methods
10/1/2021 - Paper - French - AFNOR
Learn More€130.67 -
BS ISO 19220:2021
Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings. Styrene copolymer blends (SAN + PVC)
7/29/2021 - PDF - English - BSI
Learn More€293.00 -
BS EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage. Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin
7/9/2021 - PDF - English - BSI
Learn More€377.00 -
NBN EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
7/5/2021 - PDF - French - NBN
Learn More€184.00 -
NBN EN ISO 23856:2021
Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021)
7/5/2021 - PDF - English - NBN
Learn More€184.00 -
NBN EN ISO 23856:2021
Kunststoff-Rohrleitungssysteme für Wasserversorgung, Entwässerungssysteme und Abwasserleitungen mit und ohne Druck - Glasfaserverstärkte duroplastische Kunststoffe (GFK) auf der Basis von ungesättigtem Polyesterharz (UP) (ISO 23856:2021)
7/5/2021 - PDF - German - NBN
Learn More€184.00 -
BS EN ISO 11296-4:2018+A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with cured-in-place pipes
6/14/2021 - PDF - English - BSI
Learn More€348.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - French - NBN
Learn More€20.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - German - NBN
Learn More€20.00 -
NBN EN ISO 11296-4:2018/A1:2021
Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative expression of flexural test results (ISO 11296-4:2018/Amd 1:2021)
5/28/2021 - PDF - English - NBN
Learn More€20.00 -
NBN ISO 16611:2021
Plastics piping systems for drainage and sewerage without pressure — Non-circular pipes and joints made of glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resins (UP) — Dimensions, requirements and tests ISO 16611:2017
5/26/2021 - PDF - English - NBN
Learn More€121.00 -
BS EN 1519-1:2019
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Requirements pipes, fittings system
4/14/2021 - PDF - English - BSI
Learn More€293.00 -
UNE-CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in March of 2021.)
3/1/2021 - PDF - English - AENOR
Learn More€69.00 -
NBN EN 1329-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/27/2021 - PDF - French - NBN
Learn More€163.00 -
NBN EN 1329-1:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: Specifications for pipes, fittings and the system
1/27/2021 - PDF - English - NBN
Learn More€163.00 -
NBN EN 1329-1:2021
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 1: Anforderungen an Rohre, Formstücke und das Rohrleitungssystem
1/27/2021 - PDF - German - NBN
Learn More€163.00 -
CEN/TS 1329-2:2021
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Weichmacherfreies Polyvinylchlorid (PVC-U) - Teil 2: Empfehlungen für die Beurteilung der Konformität
1/25/2021 - PDF - German - NBN
Learn More€142.00 -
CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity
1/25/2021 - PDF - English - NBN
Learn More€142.00 -
PD CEN/TS 1329-2:2021
Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Unplasticized poly(vinyl chloride) (PVC-U) Guidance assessment of conformity
1/19/2021 - PDF - English - BSI
Learn More€250.00 -
NF EN 1329-1, T54-017-1 (12/2020)
Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1 : specifications for pipes, fittings and the system - Systèmes de canalisations en plastique pour l'évacuation des eaux-vannes et des eaux usées (à basse et à haute température) à l'intérieur de la structure des bâtiments - Poly(chlorurede vinyle) non plastifié (PVC-U) - Partie 1 : Spécifications pour tubes, raccords et le système
12/1/2020 - Paper - French - AFNOR
Learn More€119.00 -
VDI 3805 Blatt 40:2020-11
Product data exchange in the building services - Interceptors
11/1/2020 - PDF - German - VDI
Learn More€82.13 -
DIN EN ISO 13259:2020-10
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020), German version EN ISO 13259:2020
10/1/2020 - PDF - German - DIN
Learn More€72.80 -
UNE-CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€66.00 -
UNE-CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€71.00 -
NBN EN ISO 13259:2020
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
8/27/2020 - PDF - French - NBN
Learn More€58.00 -
NBN EN ISO 13259:2020
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
8/27/2020 - PDF - German - NBN
Learn More€58.00 -
NBN EN ISO 13259:2020
Thermoplastics piping systems for underground non-pressure applications - Test method for leaktightness of elastomeric sealing ring type joints (ISO 13259:2020)
8/27/2020 - PDF - English - NBN
Learn More€58.00 -
BS EN ISO 13259:2020
Thermoplastics piping systems for underground non-pressure applications. Test method for leaktightness of elastomeric sealing ring type joints
8/13/2020 - PDF - English - BSI
Learn More€180.00 -
DIN CEN/TS 1451-2:2020-08
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polypropylene (PP) - Part 2: Guidance for the assessment of conformity, German version CEN/TS 1451-2:2019
8/1/2020 - PDF - German - DIN
Learn More€68.60 -
PD CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Guidance assessment of conformity
7/21/2020 - PDF - English - BSI
Learn More€250.00 -
PD CEN/TS 17176-7:2020
Plastics piping systems for water supply and buried above ground drainage, sewerage irrigation under pressure. Oriented unplasticized poly(vinyl chloride) (PVC-O) Assessment of conformity
7/20/2020 - PDF - English - BSI
Learn More€250.00 -
20/30420214 DC:2020
BS EN 1455-1. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Part 1. Requirements pipes, fittings system
7/20/2020 - PDF - English - BSI
Learn More€24.00 -
CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity
7/10/2020 - PDF - German - NBN
Learn More€142.00 -
CEN/TS 17176-7:2020
Plastics piping systems for water supply and for buried and above ground drainage, sewerage and irrigation under pressure - Oriented unplasticized poly(vinyl chloride) (PVC-O) - Part 7: Assessment of conformity
7/10/2020 - PDF - English - NBN
Learn More€142.00 -
CEN/TS 1519-2:2020
Kunststoff-Rohrleitungssysteme zum Ableiten von Abwasser (niedriger und hoher Temperatur) innerhalb der Gebäudestruktur - Polyethylen (PE) - Teil 2: Empfehlungen für die Beurteilung der Konformität
7/10/2020 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low and high temperature) within the building structure - Polyethylene (PE) - Part 2: Guidance for the assessment of conformity
7/10/2020 - PDF - English - NBN
Learn More€121.00 -
UNE-EN 14366:2005+A1:2020
Laboratory measurement of noise from waste water installations
6/3/2020 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-EN 14366:2005+A1:2020
Laboratory measurement of noise from waste water installations
6/3/2020 - PDF - English - AENOR
Learn More€82.80 -
BS EN ISO 11297-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11297-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground drainage and sewerage networks under pressure General
2/27/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 12050-1:2015 + Redline
Tracked Changes. Wastewater lifting plants for buildings and sites Lifting wastewater containing faecal matter
2/26/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN 12050-2:2015 + Redline
Tracked Changes. Wastewater lifting plants for buildings and sites Lifting faecal-free wastewater
2/26/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN 12050-3:2015 + Redline
Tracked Changes. Wastewater lifting plants for buildings and sites Lifting limited applications
2/26/2020 - PDF - English - BSI
Learn More€382.00 -
BS EN ISO 13257:2018 + Redline
Tracked Changes. Thermoplastics piping systems for non-pressure applications. Test method for resistance to elevated temperature cycling
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
BS EN ISO 11296-3:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with close-fit pipes
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN ISO 11296-1:2018 + Redline
Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks General
2/26/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 12050-4:2015 + Redline
Tracked Changes. Wastewater lifting plants for buildings and sites Non-return valves faecal-free wastewater containing faecal matter
2/25/2020 - PDF - English - BSI
Learn More€382.00 -
€197.00
-
BS EN 1253-5:2017 + Redline
Tracked Changes. Gullies for buildings with light liquids closure
2/25/2020 - PDF - English - BSI
Learn More€197.00 -
BS EN ISO 11296-7:2019 + Redline
Tracked Changes. Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks Lining with spirally-wound pipes
2/24/2020 - PDF - English - BSI
Learn More€326.00 -
BS EN 1610:2015 + Redline
Tracked Changes. Construction and testing of drains and sewers
2/24/2020 - PDF - English - BSI
Learn More€382.00 -
ASTM C1131-20
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
2/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM C1131-20 + Redline
Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
2/1/2020 - PDF - English - ASTM
Learn More€61.00 -
UNE-EN ISO 13257:2020
Thermoplastics piping systems for non-pressure applications - Test method for resistance to elevated temperature cycling (ISO 13257:2018)
1/8/2020 - PDF - Spanish - AENOR
Learn More€68.00