91.140.60 : Water supply systems 91.140 : Installations in buildings 91 : Construction materials and building ICS

CEN/TS 12201-7:2026

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 7: Assessment of conformity
2/18/2026 - PDF - English - NBN
Learn More

€163.00

Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow, German version EN 1717:2025.
2/1/2026 - PDF - German - DIN
Learn More

€150.65

DIN EN 18021:2026-01

Sanitary tapware - Measurement of functional performance of taps and showers, German version EN 18021:2025
1/1/2026 - PDF - German - DIN
Learn More

€116.64

DIN EN 13079:2026-01

Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D, German version EN 13079:2025
1/1/2026 - PDF - German - DIN
Learn More

€69.91

DIN 1988-600:2026-01

Codes of practice for potable water installations - Part 600: Potable water installations in connection with fire fighting and fire protection installations.
1/1/2026 - PDF - German - DIN
Learn More

€105.42

ISO/DIS 11177:2025

Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
12/31/2025 - - - ISO
Learn More

€77.00

ISO/DIS 18994:2025

Plastics — Plastic water meter cabinet — Materials and design specifications
12/8/2025 - PDF - English - ISO
Learn More

€77.00

25/30469664 DC:2025

BS ISO 18994 Plastics — Plastic water meter cabinet — Materials and design specifications
12/8/2025 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN ISO 4064-2:2025

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2024)
12/3/2025 - PDF - Spanish - AENOR
Learn More

€155.00

DIN 35911:2025-12

Automatic electrical controls for installation in drinking water systems - Requirements for solenoid valves
12/1/2025 - PDF - German - DIN
Learn More

€69.91

DIN EN ISO 4064-5:2025-12

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2025), German version EN ISO 4064-5:2025.
12/1/2025 - PDF - German - DIN
Learn More

€77.20

PR NF EN ISO 11177 (12/2025)

Émaux vitrifiés - Robinetterie et raccords de tuyauterie pour conduites forcées émaillés à l'intérieur et à l'extérieur destinés à l'alimentation en eau non traitée et en eau potable - Exigences de qualité et essais
12/1/2025 - PDF - French - AFNOR
Learn More

€48.50

NF EN 13757-4, E17-901-4PR (12/2025)

Systèmes de communication pour compteurs - Partie 4 : Communication sans fil M-Bus
12/1/2025 - PDF - English - AFNOR
Learn More

€163.50

BS EN 13079:2025 + Redline

Tracked Changes. Devices to prevent pollution by backflow of potable water. Air gap with injector. Family A. Type D
11/21/2025 - PDF DRM - English - BSI
Learn More

€271.00

BS EN 13079:2025

Devices to prevent pollution by backflow of potable water — Air gap with injector — Family A — Type D
11/10/2025 - PDF DRM - English - BSI
Learn More

€193.00

UNE-EN ISO 4064-1:2025

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2024)
11/5/2025 - - - AENOR
Learn More

From: €118.00

NBN EN 13079:2025

Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
11/5/2025 - - - NBN
Learn More

€89.00

NF EN ISO 15875-1, T54-943-1 (11/2025)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 1 : Généralités
11/1/2025 - PDF - French - AFNOR
Learn More

€82.00

NF EN ISO 15875-3, T54-943-3 (11/2025)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 3 : Raccords
11/1/2025 - PDF - French - AFNOR
Learn More

€107.33

NF EN ISO 15875-2, T54-943-2 (11/2025)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 2 : Tubes
11/1/2025 - PDF - French - AFNOR
Learn More

€107.33

DIN 3546:2025-11

Shut-off valves for drinking water installations in properties and buildings - General requirements and tests for manually operated shut-off valves
11/1/2025 - PDF - German - DIN
Learn More

€84.58

DIN EN ISO 11177:2025-11

Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO/DIS 11177:2025), German and English version prEN ISO 11177:2025
11/1/2025 - PDF - English, German - DIN
Learn More

€56.17

NF EN 13079, P43-023 (11/2025)

Dispositifs de protection contre la pollution de l'eau potable par retour - Surverse par injecteur - Famille A - Type D
11/1/2025 - PDF - French - AFNOR
Learn More

€65.50

NBN EN ISO 15875-2:2025

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO 15875-2:2025)
10/30/2025 - - - NBN
Learn More

€124.00

NBN EN ISO 15875-3:2025

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO 15875-3:2025)
10/30/2025 - - - NBN
Learn More

€124.00

NBN EN ISO 15875-5:2025

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO 15875-5:2025)
10/30/2025 - - - NBN
Learn More

€58.00

NBN EN ISO 15875-1:2025

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO 15875-1:2025)
10/30/2025 - - - NBN
Learn More

€58.00

BS EN ISO 4064-5:2025 + Redline

Tracked Changes. Water meters for cold potable water and hot Installation requirements
10/24/2025 - PDF DRM - English - BSI
Learn More

€271.00

25/30543397 DC:2025

BS EN 1490 Building valves - Combined temperature and pressure relief valves - Tests and requirements
10/16/2025 - PDF DRM - English - BSI
Learn More

€23.00

ISO 15875-1:2025

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X)
Part 1: General
10/10/2025 - - - ISO
Learn More

€77.00

ISO 15875-2:2025

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X)
Part 2: Pipes
10/10/2025 - - - ISO
Learn More

€155.00

ISO 15875-3:2025

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X)
Part 3: Fittings
10/10/2025 - - - ISO
Learn More

€155.00

ISO 15875-5:2025

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X)
Part 5: Fitness for purpose of the system
10/10/2025 - - - ISO
Learn More

€77.00

BS EN ISO 4064-5:2025

Water meters for cold potable water and hot Installation requirements
10/7/2025 - PDF DRM - English - BSI
Learn More

€193.00

25/30509629 DC:2025

BS EN ISO 11177 Vitreous and porcelain enamels — Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply — Quality requirements and testing
10/7/2025 - PDF DRM - English - BSI
Learn More

€23.00

NBN EN ISO 4064-5:2025

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2025)
10/2/2025 - - - NBN
Learn More

€58.00

NF EN ISO 15875-5, T54-943-5 (10/2025)

Systèmes de canalisations en plastique pour les installations d'eau chaude et froide - Polyéthylène réticulé (PE-X) - Partie 5 : Aptitude à l'emploi du système
10/1/2025 - PDF - French - AFNOR
Learn More

€65.33

DIN EN 1490:2025-10

Building valves - Combined temperature and pressure relief valves - Tests and requirements, German and English version prEN 1490:2025
10/1/2025 - PDF - English, German - DIN
Learn More

€105.42

UNE-EN ISO 4064-4:2025

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024)
10/1/2025 - PDF - Spanish - AENOR
Learn More

€82.00

UNE-EN ISO 4064-3:2025

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)
10/1/2025 - - - AENOR
Learn More

From: €131.00

NF EN ISO 4064-5, E17-002-5 (10/2025)

Compteurs d'eau potable froide et d'eau chaude - Partie 5 : exigences d'installation
10/1/2025 - PDF - French - AFNOR
Learn More

€82.00

UNE-EN 17962:2025

Valves and fittings for buildings and devices to prevent pollution by backflow of potable water - Polymer parts and housings under internal pressure and without external loads
10/1/2025 - - - AENOR
Learn More

From: €61.00

VDI-MT 6023 Blatt 4:2025-10

Hygiene in drinking-water supply systems - Qualification for drinking-water hygiene professionals
10/1/2025 - PDF - German - VDI
Learn More

€83.76

PD IEC SRD 63301-2:2025

Smart city use case collection and analysis. Water systems in smart cities Use analysis
9/26/2025 - PDF DRM - English - BSI
Learn More

€355.00

25/30545688 DC:2025

BS EN 61770:2009/AC Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
9/26/2025 - PDF DRM - English - BSI
Learn More

€23.00

ISO 4064-5:2025

Water meters for cold potable water and hot water
Part 5: Installation requirements
9/17/2025 - - - ISO
Learn More

€77.00

UNE 149101:2025

Water conditioning equipment inside buildings. Validation of equipment used in the treatment of drinking water in the interior of buildings
9/17/2025 - PDF - Spanish - AENOR
Learn More

€82.00

IEC SRD 63301-2:2025

IEC SRD 63301-2:2025 Smart city use case collection and analysis - Water systems in smart cities - Part 2 : Use case analysis
9/17/2025 - PDF - English - IEC
Learn More

€302.00

NBN EN 1717:2025

Protection against pollution of water intended for human consumption in potable water installations and general requirements for devices to prevent pollution by backflow
8/7/2025 - - - NBN
Learn More

€184.00

NF EN 1717, P43-100 (08/2025)

Protection contre la pollution de l'eau destinée à la consommation humaine dans les installations d'eau potable et exigences générales applicables aux dispositifs de protection contre la pollution par retour
8/1/2025 - PDF - French - AFNOR
Learn More

€156.67

DIN EN ISO 4064-3:2025-07

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024), German version EN ISO 4064-3:2025.
7/1/2025 - PDF - German - DIN
Learn More

€195.79

DIN EN ISO 4064-4:2025-07

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024), German version EN ISO 4064-4:2025.
7/1/2025 - PDF - German - DIN
Learn More

€111.40

DIN EN ISO 4064-1:2025-07

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2024), German version EN ISO 4064-1:2025.
7/1/2025 - PDF - German - DIN
Learn More

€150.65

DIN EN ISO 4064-2:2025-07

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2024), German version EN ISO 4064-2:2025.
7/1/2025 - PDF - German - DIN
Learn More

€229.44

DIN 14464:2025-07

Assembly with direct connection for sprinkler systems and extinguishing systems with open nozzles - Requirements and testing
7/1/2025 - PDF - German - DIN
Learn More

€77.20

25/30481894 DC:2025

BS ISO 25780 Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin - Pipes with flexible joints intended to be installed using jacking techniques
6/24/2025 - PDF DRM - English - BSI
Learn More

€23.00

PR NF EN 15848, P41-609PR (06/2025)

Équipement de conditionnement de l'eau à l'intérieur des bâtiments - Systèmes de dosage chimique réglables - Exigences relatives aux performances, à la sécurité et aux essais
6/1/2025 - PDF - English, French - AFNOR
Learn More

€80.50

BS EN 805:2025 + Redline

Tracked Changes. Water supply. Requirements for systems and components outside buildings
5/14/2025 - PDF DRM - English - BSI
Learn More

€566.00

BS EN 805:2025

Water supply. Requirements for systems and components outside buildings
4/28/2025 - PDF DRM - English - BSI
Learn More

€404.00

25/30457420 DC:2025

BS ISO 12051 Plastics piping systems for water supply and drainage and sewerage under pressure. modified poly(vinyl chloride)(PVC-M) pipe
4/25/2025 - PDF DRM - English - BSI
Learn More

€23.00

NF EN 13757-3, E17-901-3 (04/2025)

Systèmes de communication pour compteurs - Partie 3 : protocoles d'application
4/1/2025 - PDF - French - AFNOR
Learn More

€200.67

NF EN 13757-7, E17-901-7 (04/2025)

Systèmes de communication pour compteurs - Partie 7 : services de transport et de sécurité
4/1/2025 - PDF - French - AFNOR
Learn More

€181.00

DIN 35913:2025-04

Valves for drinking water installations in buildings - Level-controlled shut-off valves in drinking water installations - Requirements and tests
4/1/2025 - PDF - German - DIN
Learn More

€56.17

DIN EN 15848:2025-04

Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing, German and English version prEN 15848:2025
4/1/2025 - PDF - English, German - DIN
Learn More

€77.20

25/30508981 DC:2025

BS EN 15848 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing
3/27/2025 - PDF DRM - English - BSI
Learn More

€23.00

BS EN ISO 4064-2:2025 + Redline

Tracked Changes. Water meters for cold potable water and hot Test methods
3/19/2025 - PDF DRM - English - BSI
Learn More

€566.00

BS EN ISO 4064-1:2025 + Redline

Tracked Changes. Water meters for cold potable water and hot Metrological technical requirements
3/19/2025 - PDF DRM - English - BSI
Learn More

€524.00

BS EN ISO 4064-1:2025

Water meters for cold potable water and hot Metrological technical requirements
3/3/2025 - PDF DRM - English - BSI
Learn More

€374.00

BS EN ISO 4064-2:2025

Water meters for cold potable water and hot Test methods
3/3/2025 - PDF DRM - English - BSI
Learn More

€404.00

PR NF EN 1420, P41-030PR (03/2025)

Influence des matériaux organiques sur l'eau destinée à la consommation humaine - Détermination de l'odeur, de la flaveur, de la couleur et de la turbidité de l'eau dans les réseaux de conduites et les systèmes de stockage
3/1/2025 - PDF - English, French - AFNOR
Learn More

€105.50

NBN EN ISO 4064-1:2025

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2024)
2/27/2025 - - - NBN
Learn More

€166.00

NBN EN ISO 4064-2:2025

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2024)
2/27/2025 - - - NBN
Learn More

€208.00

NF EN 13828, D36-406 (02/2025)

Robinetterie de bâtiment - Robinets d'arrêt à tournant sphérique actionnés à la main en alliage de cuivre et en acier inoxydable pour la distribution d'eau potable dans les bâtiments - Essais et exigences
2/1/2025 - PDF - French - AFNOR
Learn More

€93.67

NF EN ISO 4064-1, E17-002-1 (02/2025)

Compteurs d'eau potable froide et d'eau chaude - Partie 1 : exigences métrologiques et techniques
2/1/2025 - PDF - French - AFNOR
Learn More

€141.33

NF EN ISO 4064-2, E17-002-2 (02/2025)

Compteurs d'eau potable froide et d'eau chaude - Partie 2 : méthodes d'essai
2/1/2025 - PDF - French - AFNOR
Learn More

€200.67

UNE-EN 12201-3:2024/AC:2025

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
1/22/2025 - - - AENOR
Learn More

€0.00

BS EN ISO 4064-3:2025 + Redline

Tracked Changes. Water meters for cold potable water and hot Test report format
1/21/2025 - PDF DRM - English - BSI
Learn More

€566.00

BS EN ISO 4064-4:2025 + Redline

Tracked Changes. Water meters for cold potable water and hot Non-metrological requirements not covered in ISO 4064-1
1/21/2025 - PDF DRM - English - BSI
Learn More

€443.00

BS EN ISO 4064-4:2025

Water meters for cold potable water and hot Non-metrological requirements not covered in ISO 4064-1
1/15/2025 - PDF DRM - English - BSI
Learn More

€316.00

BS EN ISO 4064-3:2025

Water meters for cold potable water and hot Test report format
1/13/2025 - PDF DRM - English - BSI
Learn More

€404.00

NBN EN ISO 4064-4:2025

Water meters for cold potable water and hot water - Part 4: Non-metrological requirements not covered in ISO 4064-1 (ISO 4064-4:2024)
1/8/2025 - - - NBN
Learn More

€145.00

NBN EN ISO 4064-3:2025

Water meters for cold potable water and hot water - Part 3: Test report format (ISO 4064-3:2024)
1/8/2025 - - - NBN
Learn More

€187.00

NF P43-015 (01/2025)

Robinetterie de bâtiment - Robinets de puisage à soupape - Spécifications techniques générales
1/1/2025 - PDF - French - AFNOR
Learn More

€82.00

NF EN ISO 4064-3, E17-002-3 (01/2025)

Compteurs d'eau potable froide et d'eau chaude - Partie 3 : format du rapport d’essai
1/1/2025 - PDF - French - AFNOR
Learn More

€167.33

NF EN ISO 4064-4, E17-002-4 (01/2025)

Compteurs d'eau potable froide et d'eau chaude - Partie 4 : exigences non métrologiques non couvertes par l'ISO 4064-1
1/1/2025 - PDF - French - AFNOR
Learn More

€107.33

ISO 4064-1:2024

Water meters for cold potable water and hot water
Part 1: Metrological and technical requirements
12/19/2024 - - - ISO
Learn More

€208.00

ISO 4064-2:2024

Water meters for cold potable water and hot water
Part 2: Test methods
12/19/2024 - - - ISO
Learn More

€261.00

ISO 4064-3:2024

Water meters for cold potable water and hot water
Part 3: Test report format
12/19/2024 - - - ISO
Learn More

€235.00

ISO 4064-4:2024

Water meters for cold potable water and hot water
Part 4: Non-metrological requirements not covered in ISO 4064-1
12/19/2024 - - - ISO
Learn More

€183.00

PD IEC SRD 63301-1:2024

Smart city use case collection and analysis. Water systems in smart cities High-level analysis
12/18/2024 - PDF DRM - English - BSI
Learn More

€355.00

IEC SRD 63301-1:2024

IEC SRD 63301-1:2024 Smart city use case collection and analysis – Water systems in smart cities – Part 1: High-level analysis
12/12/2024 - PDF - English - IEC
Learn More

€342.00

ASTM C1802/C1802M-24

Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
12/1/2024 - PDF DRM non imprimable - English - ASTM
Learn More

€94.00

ASTM C1802/C1802M-24 + Redline

Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
12/1/2024 - PDF DRM non imprimable - English - ASTM
Learn More

€113.00

PR NF EN 806-1, P41-020-1PR (11/2024)

Spécifications techniques relatives aux installations pour l'eau destinée à la consommation humaine à l'intérieur des bâtiments - Partie 1 : Généralités
11/1/2024 - PDF - English, French - AFNOR
Learn More

€150.00

PR NF EN 806-2, P41-020-2PR (11/2024)

Spécifications techniques relatives aux installations pour l'eau destinée à la consommation humaine à l'intérieur des bâtiments - Partie 2 : Conception
11/1/2024 - PDF - English, French - AFNOR
Learn More

€160.00

DIN EN 806-2:2024-10

Specification for installations inside buildings conveying water intended for human consumption - Part 2: Design, German and English version prEN 806-2:2024
10/1/2024 - PDF - English, German - DIN
Learn More

€162.06

DIN EN 17821 Berichtigung 1:2024-10

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification, German version EN 17821:2023/AC:2024
10/1/2024 - PDF - German - DIN
Learn More

€0.00

DIN EN 806-1:2024-10

Specifications for installations inside buildings conveying water intended for human consumption - Part 1: General, German and English version prEN 806-1:2024
10/1/2024 - PDF - English, German - DIN
Learn More

€145.14

BS EN 17821:2023

Building valves. Frost resistant taps for outdoor use (FRT). General technical specification
9/25/2024 - PDF DRM - English - BSI
Learn More

€269.00

24/30493089 DC:2024

BS EN 806-1 Specifications for installations inside buildings conveying water intended human consumption Part 1: General
9/19/2024 - PDF DRM - English - BSI
Learn More

€23.00

24/30493092 DC:2024

BS EN 806-2 Specification for installations inside buildings conveying water intended human consumption Part 2: Design
9/19/2024 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN 12201-4:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 4: Valves for water supply systems
9/18/2024 - - - AENOR
Learn More

From: €76.00

UNE-EN 12201-2:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 2: Pipes
9/18/2024 - - - AENOR
Learn More

From: €80.00

UNE-EN 12201-3:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 3: Fittings
9/18/2024 - - - AENOR
Learn More

From: €95.00

UNE-EN 12201-5:2024

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 5: Fitness for purpose of the system
9/18/2024 - - - AENOR
Learn More

From: €69.00

UNE-EN 12201-1:2024 V2

Plastics piping systems for water supply, and for drains and sewers under pressure - Polyethylene (PE) - Part 1: General
9/18/2024 - - - AENOR
Learn More

From: €78.00

DIN 35910:2024-09

Fittings for potable water installations in buildings - Intrinsically safe devices for connection to potable water installations - Requirements and tests
9/1/2024 - PDF - German - DIN
Learn More

€63.27

DIN EN ISO 15875-2:2024-09

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 2: Pipes (ISO/DIS 15875-2:2024), German and English version prEN ISO 15875-2:2024.
9/1/2024 - PDF - English, German - DIN
Learn More

€105.42

DIN EN ISO 15875-5:2024-09

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 5: Fitness for purpose of the system (ISO/DIS 15875-5:2024), German and English version prEN ISO 15875-5:2024.
9/1/2024 - PDF - English, German - DIN
Learn More

€77.20

DIN EN ISO 15875-3:2024-09

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 3: Fittings (ISO/DIS 15875-3:2024), German and English version prEN ISO 15875-3:2024.
9/1/2024 - PDF - English, German - DIN
Learn More

€105.42

DIN 3640:2024-08

Polyethylene shut-off valves (PE 80 and PE 100) for drinking water distribution systems - Requirements and tests
8/1/2024 - PDF - German - DIN
Learn More

€56.17

DIN EN ISO 15875-1:2024-08

Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Part 1: General (ISO/DIS 15875-1:2024), German and English version prEN ISO 15875-1:2024
8/1/2024 - PDF - English, German - DIN
Learn More

€84.58

24/30488707 DC:2024

BS EN 13079 Devices to prevent pollution by backflow of potable water - Air gap with injector - Family A - Type D
7/18/2024 - PDF DRM - English - BSI
Learn More

€23.00

UNE 53943:2024

Plastic networks to centralize water meters. Polyethylene (PE), polypropylene (PP) and polybutene (PB) networks with butt welded joints.
7/17/2024 - PDF - Spanish - AENOR
Learn More

€69.00

UNE-EN 17821:2024/AC:2024

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
7/3/2024 - - - AENOR
Learn More

€0.00

BS EN ISO 15876-1:2017

Plastics piping systems for hot and cold water installations. Polybutene (PB) General
6/10/2024 - PDF DRM - English - BSI
Learn More

€193.00

BS EN ISO 22391-1:2009

Plastics piping systems for hot and cold water installations. Polyethylene of raised temperature resistance (PE-RT) General
5/30/2024 - PDF DRM - English - BSI
Learn More

€193.00

BS EN ISO 21003-5:2008

Multilayer piping systems for hot and cold water installations inside buildings Fitness purpose of the system
5/13/2024 - PDF DRM - English - BSI
Learn More

€193.00

BS EN ISO 21003-1:2008

Multilayer piping systems for hot and cold water installations inside buildings General
5/13/2024 - PDF DRM - English - BSI
Learn More

€193.00

DIN 94680:2024-05

Procedures for billing and consumption information on heating and hot water costs
5/1/2024 - PDF - German - DIN
Learn More

€98.32

BS EN ISO 15874-1:2013+A1:2022

Plastics piping systems for hot and cold water installations. Polypropylene (PP) General
4/22/2024 - PDF DRM - English - BSI
Learn More

€193.00

DIN CEN/TS 14632:2024-04

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity, German version CEN/TS 14632:2023
4/1/2024 - PDF - German - DIN
Learn More

€98.13

UNE-EN 17821:2024

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
3/27/2024 - - - AENOR
Learn More

From: €72.00

UNE-EN 14154-4:2024

Water meters - Part 4: Additional functionalities
3/20/2024 - - - AENOR
Learn More

From: €74.00

DIN 35912:2024-03

Water systems in buildings - Thermostatic mixers for hot water distribution systems - Requirements and tests.
3/1/2024 - PDF - German - DIN
Learn More

€41.78

BS EN 61770:2009+A12:2022

Electric appliances connected to the water mains. Avoidance of backsiphonage and failure of hose-sets
2/19/2024 - PDF DRM - English - BSI
Learn More

€374.00

BS EN 12201-5:2024 + Redline

Tracked Changes. Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/14/2024 - PDF - English - BSI
Learn More

€235.00

BS EN 12201-5:2024

Plastics piping systems for water supply, and drains sewers under pressure. Polyethylene (PE) Fitness purpose of the system
2/7/2024 - PDF - English - BSI
Learn More

€180.00

ASTM F2769-24

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
2/1/2024 - PDF DRM non imprimable - English - ASTM
Learn More

€72.00

ASTM F2769-24 + Redline

Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
2/1/2024 - PDF DRM non imprimable - English - ASTM
Learn More

€86.00

ISO 16422-1:2024

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure
Part 1: General
2/1/2024 - PDF - English - ISO
Learn More

€77.00

ISO 16422-2:2024

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure
Part 2: Pipes
2/1/2024 - PDF - English - ISO
Learn More

€155.00

ISO 16422-5:2024

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure
Part 5: Fitness for purpose of the system
2/1/2024 - PDF - English - ISO
Learn More

€77.00

BS EN 751-3:2022+A1:2023

Sealing materials for metallic threaded joints in contact with 1st, 2nd and 3rd family gases hot water Unsintered PTFE tapes strings
1/19/2024 - PDF - English - BSI
Learn More

€250.00

NF EN 12201-2, T54-063-2 (01/2024)

Systèmes de canalisations en plastique pour l'alimentation en eau et pour les branchements et les collecteurs d'assainissement avec pression - Polyéthylène (PE) - Partie 2 : tubes
1/1/2024 - PDF - French - AFNOR
Learn More

€93.67

NF EN 12201-3, T54-063-3 (01/2024)

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 3 : Fittings
1/1/2024 - PDF - French - AFNOR
Learn More

€117.00

NF EN 12201-1, T54-063-1 (01/2024)

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1 : general
1/1/2024 - PDF - French - AFNOR
Learn More

€93.67

NF EN 12201-4, T54-063-4 (01/2024)

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 4 : Valves for water supply systems
1/1/2024 - PDF - French - AFNOR
Learn More

€93.67

NF EN 12201-5, T54-063-5 (01/2024)

Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 5 : Fitness for purpose of the system
1/1/2024 - PDF - French - AFNOR
Learn More

€65.33

UNE-EN 1491:2023

Building valves - Expansion valves - Tests and requirements
12/27/2023 - - - AENOR
Learn More

From: €75.00

NBN ISO 4633:2023

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
12/21/2023 - PDF - English - NBN
Learn More

€92.00

NF EN 13757-2+A1, E17-901-2 (12/2023)

Systèmes de communication pour compteurs - Partie 2 : communication M-Bus filaire
12/1/2023 - PDF - French - AFNOR
Learn More

€107.33

NF EN 17818, P41-044 (12/2023)

Équipements pour le production in situ de biocides - Chlore actif produit à partir de chlorure de sodium par électrolyse
12/1/2023 - PDF - French - AFNOR
Learn More

€117.00

NF EN 13757-2/IN1, E17-901-2/IN1 (12/2023)

Systèmes de communication pour compteurs - Partie 2 : communication M-Bus filaire
12/1/2023 - PDF - French - AFNOR
Learn More

€59.00

UNE-EN 12729:2023

Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A
11/29/2023 - - - AENOR
Learn More

From: €83.00

UNE-EN ISO 4064-1:2018/A11:2023

Water meters for cold potable water and hot water - Part 1: Metrological and technical requirements (ISO 4064-1:2014)
11/29/2023 - - - AENOR
Learn More

From: €47.00

UNE-EN ISO 4064-2:2018/A11:2023

Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014)
11/29/2023 - - - AENOR
Learn More

From: €54.00

UNE-EN ISO 4064-5:2018/A11:2023

Water meters for cold potable water and hot water - Part 5: Installation requirements (ISO 4064-5:2014)
11/29/2023 - - - AENOR
Learn More

From: €47.00

22/30433302 DC:2023

BS EN 805. Water supply. Requirements for systems and components outside buildings
11/16/2023 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN 17800:2023

Life cycle cost (LCC) and Life cycle assessment (LCA) for CO2 emissions in ductile iron pipe systems
11/15/2023 - - - AENOR
Learn More

From: €81.00

UNE-CEN/TS 14632:2023

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity (Endorsed by Asociación Española de Normalización in November of 2023.)
11/3/2023 - PDF - English - AENOR
Learn More

€76.00

NF P43-018 (11/2023)

Robinetterie de bâtiment - Appareil de contrôle des dispositifs de robinetterie installés sur les réseaux d'eau potable - Caractéristiques
11/1/2023 - PDF - French - AFNOR
Learn More

€52.00

VDI/AMEV/BVS/DVQST-EE 6023 Blatt 1.1:2023-11

Hygiene in drinking-water installations - Drink dispensers and vending machines connected to the drinking-water installation
11/1/2023 - PDF - German - VDI
Learn More

€51.99

23/30467126 DC:2023

BS EN ISO 4064-5. Water meters for cold potable water and hot Part 5. Installation requirements
10/13/2023 - PDF DRM - English - BSI
Learn More

€23.00

23/30452561 DC:2023

BS EN ISO 4064-1. Water meters for cold potable water and hot Part 1. Metrological technical requirements
10/9/2023 - PDF DRM - English - BSI
Learn More

€23.00

23/30452565 DC:2023

BS EN ISO 4064-2. Water meters for cold potable water and hot Part 2. Test methods
10/9/2023 - PDF DRM - English - BSI
Learn More

€42.00

23/30467118 DC:2023

BS EN ISO 4064-3. Water meters for cold potable water and hot Part 3. Test report format
10/9/2023 - PDF DRM - English - BSI
Learn More

€23.00

23/30467122 DC:2023

BS EN ISO 4064-4. Water meters for cold potable water and hot Part 4. Non-metrological requirements not covered in 4064-1
10/9/2023 - PDF DRM - English - BSI
Learn More

€23.00

UNE-EN 61770:2009/A12:2022/AC:2023-06

Electric appliances connected to the water mains - Avoidance of backsiphonage and failure of hose-sets
9/20/2023 - - - AENOR
Learn More

€0.00

BS EN 14154-4:2023 + Redline

Tracked Changes. Water meters Part 4: Additional functionalities
9/4/2023 - PDF - English - BSI
Learn More

€326.00

DIN EN 17821:2023-09

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification, German version EN 17821:2023
9/1/2023 - PDF - German - DIN
Learn More

€91.03

BS ISO 4633:2023

Rubber seals. Joint rings for water supply, drainage and sewerage pipelines. Specification for materials
9/1/2023 - PDF DRM - English - BSI
Learn More

€193.00

VDI 6023 Blatt 1:2023-09

Hygiene in drinking-water supply systems - Requirements for planning, execution, operation, and maintenance
9/1/2023 - PDF - English, German - VDI
Learn More

€134.70

ISO 4633:2023

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
8/31/2023 - PDF - English - ISO
Learn More

€115.00

VDI 2077 Blatt 2:2023-08

Energy consumption accounting for the building services - Water supply systems
8/1/2023 - PDF - English, German - VDI
Learn More

€71.85

PD ISO/TS 16422-3:2023

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance water under pressure Fittings
7/5/2023 - PDF DRM - English - BSI
Learn More

€269.00

PD CEN/TS 14632:2023 + Redline

Tracked Changes. Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
7/5/2023 - PDF DRM - English - BSI
Learn More

€443.00

NBN EN 17821:2023

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
7/5/2023 - PDF - French - NBN
Learn More

€121.00

NBN EN 17821:2023

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
7/5/2023 - PDF - German - NBN
Learn More

€121.00

NBN EN 17821:2023

Building valves - Frost resistant taps for outdoor use (FRT) - General technical specification
7/5/2023 - PDF - English - NBN
Learn More

€121.00

NF EN 17821, P41-453 (07/2023)

Robinetterie de bâtiment - Robinets résistant au gel pour une utilisation en extérieur (FRT) - Spécifications techniques générales
7/1/2023 - PDF - French - AFNOR
Learn More

€82.00

DIN EN 12729:2023-07

Devices to prevent pollution by backflow of potable water - Controllable backflow preventer with reduced pressure zone - Family B - Type A, German version EN 12729:2023
7/1/2023 - PDF - German - DIN
Learn More

€111.40

PD CEN/TS 14632:2023

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). Guidance for the assessment of conformity
6/30/2023 - PDF DRM - English - BSI
Learn More

€316.00

CEN/TS 14632:2023

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
6/29/2023 - PDF - German - NBN
Learn More

€163.00

CEN/TS 14632:2023

Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure - Glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP) - Guidance for the assessment of conformity
6/29/2023 - PDF - English - NBN
Learn More

€163.00