85 : Paper technology
-
UNE-EN ISO 12625-12:2024
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)
1/10/2024 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-12:2024
Tissue paper and tissue products - Part 12: Determination of tensile strength of perforated lines and calculation of perforation efficiency (ISO 12625-12:2023)
1/10/2024 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 535:2023
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2023)
11/8/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 535:2023
Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2023)
11/8/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 187:2023
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022)
7/26/2023 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 187:2023
Paper, board and pulps - Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples (ISO 187:2022)
7/26/2023 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 3037:2023
Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
7/26/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 3037:2023
Corrugated fibreboard - Determination of edgewise crush resistance (non-waxed edge method) (ISO 3037:2022)
7/26/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 5263-3:2023
Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at = 85°C (ISO 5263-3:2023)
7/12/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 5263-3:2023
Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at = 85°C (ISO 5263-3:2023)
7/12/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-ISO 16532-1:2023
Paper and board. Determination of grease resistance. Part 1: Permeability test
5/24/2023 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-ISO 16532-2:2023
Paper and board. Determination of grease resistance. Part 2: Surface repellency test
5/24/2023 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 12625-15:2023
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2022)
5/24/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-15:2023
Tissue paper and tissue products - Part 15: Determination of optical properties - Measurement of brightness and colour with C/2° (indoor daylight) illuminant (ISO 12625-15:2022)
5/24/2023 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 17545:2023
Paper and board - Determination of Composition of Paper and Board for Recycling by gravimetric analysis
5/3/2023 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 17545:2023
Paper and board - Determination of Composition of Paper and Board for Recycling by gravimetric analysis
5/3/2023 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 5270:2023
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2022)
4/19/2023 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 5270:2023
Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2022)
4/19/2023 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 12625-4:2023
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
4/19/2023 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-4:2023
Tissue paper and tissue products - Part 4: Determination of tensile strength, stretch at maximum force and tensile energy absorption (ISO 12625-4:2022)
4/19/2023 - PDF - English - AENOR
Learn More€81.60 -
€53.00 -
€63.60
-
UNE-EN ISO 638-1:2022
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form (ISO 638-1:2022)
10/26/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 638-1:2022
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form (ISO 638-1:2022)
10/26/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 638-2:2022
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022)
10/26/2022 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 638-2:2022
Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022)
10/26/2022 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 12625-7:2022
Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)
9/28/2022 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-7:2022
Tissue paper and tissue products - Part 7: Determination of optical properties - Measurement of brightness and colour with D65/10° (outdoor daylight) (ISO 12625-7:2021)
9/28/2022 - PDF - English - AENOR
Learn More€81.60 -
UNE 149002:2022
Acceptance criteria for disposable products via toilet.
2/16/2022 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1034-4:2021
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 4: Pulpers and their loading facilities (Endorsed by Asociación Española de Normalización in December of 2021.)
12/1/2021 - PDF - English - AENOR
Learn More€74.00 -
UNE-ISO 5629:2021
Paper and board. Determination of bending stiffness. Resonance method
10/27/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-17:2021
Tissue paper and tissue products - Part 17: Determination of disintegration in water (ISO 12625-17:2021)
9/29/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 12625-17:2021
Tissue paper and tissue products - Part 17: Determination of disintegration in water (ISO 12625-17:2021)
9/29/2021 - PDF - English - AENOR
Learn More€81.60 -
UNE-ISO 3260:2021
Pulps – Determination of chlorine consumption (Degree of delignification)
9/1/2021 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-CEN/TS 17630:2021
Pulp, paper and paperboard - Determination of anthraquinone in extracts from pulp, paper and paperboard (Endorsed by Asociación Española de Normalización in September of 2021.)
9/1/2021 - PDF - English - AENOR
Learn More€57.00 -
UNE-EN 1034-1:2021
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 1: Common requirements (Endorsed by Asociación Española de Normalización in June of 2021.)
6/1/2021 - PDF - English - AENOR
Learn More€84.00 -
UNE-ISO 8791-1:2021
Paper and board. Determination of roughness/smoothness (air leak methods). Part 1: General method
4/28/2021 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-ISO 8791-2:2021
Paper and board. Determination of roughness/smoothness (air leak methods). Part 2: Bendtsen method
4/28/2021 - PDF - Spanish - AENOR
Learn More€68.00 -
€68.00 -
UNE 57043:2021
Paper and board. Determination of machine and cross directions
1/20/2021 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-EN ISO 536:2021
Paper and board - Determination of grammage (ISO 536:2019)
1/20/2021 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 536:2021
Paper and board - Determination of grammage (ISO 536:2019)
1/20/2021 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 12625-1:2020
Tissue paper and tissue products - Part 1: Vocabulary (ISO 12625-1:2019)
9/9/2020 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN ISO 12625-1:2020
Tissue paper and tissue products - Part 1: Vocabulary (ISO 12625-1:2019)
9/9/2020 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 234:2019
Wallcoverings in roll form - Specification for wallcoverings for subsequent decoration (Endorsed by Asociación Española de Normalización in March of 2020.)
3/1/2020 - PDF - English - AENOR
Learn More€46.00 -
UNE-EN 17163:2020
Pulp, paper and board - Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method
2/19/2020 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 17163:2020
Pulp, paper and board - Determination of primary aromatic amines (PAA) in a water extract by a LC-MS method
2/19/2020 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 12625-11:2020
Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2019)
2/19/2020 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12625-11:2020
Tissue paper and tissue products - Part 11: Determination of wet ball burst strength (ISO 12625-11:2019)
2/19/2020 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 17085:2019
Paper and board - Sampling procedures for paper and board for recycling
12/4/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 17085:2019
Paper and board - Sampling procedures for paper and board for recycling
12/4/2019 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 7263-2:2019
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO 7263-2:2018)
12/4/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 7263-2:2019
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 2: B-flute (ISO 7263-2:2018)
12/4/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 1104:2019
Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents
11/27/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 1104:2019
Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents
11/27/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 12498:2019
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium, chromium and lead in an aqueous extract
11/27/2019 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 12498:2019
Paper and board - Paper and board intended to come into contact with foodstuffs - Determination of cadmium, chromium and lead in an aqueous extract
11/27/2019 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN 646:2019
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
11/6/2019 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN 646:2019
Paper and board intended to come into contact with foodstuffs - Determination of colour fastness of dyed paper and board
11/6/2019 - PDF - English - AENOR
Learn More€68.40 -
UNE-EN 648:2019
Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board
11/6/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 648:2019
Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board
11/6/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN ISO 7263-1:2019
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO 7263-1:2019)
11/6/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 7263-1:2019
Corrugating medium - Determination of the flat crush resistance after laboratory fluting - Part 1: A-flute (ISO 7263-1:2019)
11/6/2019 - PDF - English - AENOR
Learn More€81.60 -
UNE-ISO 5351:2019 (R2021)
Pulps. Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution
5/22/2019 - PDF - Spanish - AENOR
Learn More€70.00 -
€60.00 -
€46.00 -
UNE-ISO 11476:2019 (R2022)
Paper and board. Determination of CIE whiteness CIE, C/2º (indoor illumination conditions)
5/22/2019 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE 57175:2019
Board. Determination of the resistance to perforation. Constant speed linear method
3/27/2019 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 287:2018
Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
3/21/2018 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 287:2018
Paper and board - Determination of moisture content of a lot - Oven-drying method (ISO 287:2017)
3/21/2018 - PDF - English - AENOR
Learn More€72.00 -
UNE-ISO 8791-4:2018
Paper and board. Determination of roughness/smoothness (air leak methods). Part 4: Print-surf method
2/28/2018 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-ISO 12192:2017
Paper and board. Determination of compressive strength. Ring crush method
9/20/2017 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-ISO 16532-3:2017
Paper and board. Determination of grease resistance. Part 3: Turpentine test for voids in glassine and greaseproof papers
9/20/2017 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 12625-5:2017
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
6/28/2017 - PDF - Spanish - AENOR
Learn More€69.00 -
UNE-EN ISO 12625-5:2017
Tissue paper and tissue products - Part 5: Determination of wet tensile strength (ISO 12625-5:2016)
6/28/2017 - PDF - English - AENOR
Learn More€82.80 -
UNE-EN ISO 12625-6:2017
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
6/28/2017 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 12625-6:2017
Tissue paper and tissue products - Part 6: Determination of grammage (ISO 12625-6:2016)
6/28/2017 - PDF - English - AENOR
Learn More€72.00 -
€49.00 -
UNE-ISO 11093-6:2017
Paper and board. Testing of cores. Part 6: Determination of bending strength by the three-point method
5/24/2017 - PDF - Spanish - AENOR
Learn More€39.00 -
ESPECIFICACION UNE 0007:2017
Requirements for the tracking and aggregation system of prices for paper for recycling
4/5/2017 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-ISO 8784-1:2016
Pulp, paper and board. Microbiological examination. Part 1: Enumeration of bacteria and bacterial spores based on disintegration
12/21/2016 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 8254-2:2016
Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
11/2/2016 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 8254-2:2016
Paper and board - Measurement of specular gloss - Part 2: 75 degree gloss with a parallel beam, DIN method (ISO 8254-2:2016)
11/2/2016 - PDF - English - AENOR
Learn More€75.60 -
UNE-ISO 3034:2016 (R2022)
Corrugated fibreboard. Determination of single sheet thickness
1/20/2016 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-ISO 2471:2015
Paper and board. Determination of opacity (paper backing). Diffuse reflectance method
12/23/2015 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 12625-9:2015
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)
9/23/2015 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12625-9:2015
Tissue paper and tissue products - Part 9: Determination of ball burst strength (ISO 12625-9:2015)
9/23/2015 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN ISO 12625-16:2015
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
9/23/2015 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12625-16:2015
Tissue paper and tissue products - Part 16: Determination of optical properties - Opacity (paper backing) - Diffuse reflectance method (ISO 12625-16:2015)
9/23/2015 - PDF - English - AENOR
Learn More€75.60 -
UNE-ISO 5631-2:2015
Paper and board. Determination of colour by diffuse relfectance. Part 2: Outdoor daylight conditions (D65/10º)
7/22/2015 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-ISO 11093-2:2015
Paper and board. Testing of cores. Part 2: Conditioning of test samples
7/22/2015 - PDF - Spanish - AENOR
Learn More€25.00 -
UNE-ISO 3781:2015
Paper and board - Determination of tensile strength after inmersion in water
7/1/2015 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-ISO 5636-3:2015
Paper and board. Determination of air permeance (medium range). Part 3: Bendtsen method
7/1/2015 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-ISO 5636-5:2015
Paper and board. Determination of air permeance (medium range). Part 5: Gurley method
7/1/2015 - PDF - Spanish - AENOR
Learn More€60.00 -
€16.00 -
UNE-EN ISO 12625-3:2015
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
1/28/2015 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 12625-3:2015
Tissue paper and tissue products - Part 3: Determination of thickness, bulking thickness and apparent bulk density and bulk (ISO 12625-3:2014)
1/28/2015 - PDF - English - AENOR
Learn More€75.60 -
UNE-ISO 801-2:2015 (R2021)
Pulps. Determination of saleable mass in lots - Part 2: Pulps (such as flash-dried pulps) baled in slabs
1/14/2015 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-ISO 4046-4:2015
Paper, board, pulps and related terms. Vocabulary. Part 4: Paper and board grades and converted products
1/14/2015 - PDF - Spanish - AENOR
Learn More€82.00 -
UNE-ISO 5631-1:2015
Paper and board. Determination of colour by diffuse reflectance. Part 1: Indoor daylight conditions (C/2º)
1/14/2015 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-ISO 16945:2015
Corrugating medium. Determination of the edge crush resistance after laboratory fluting
1/14/2015 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-ISO 2493-2:2014
Paper and board. Determination of resistance to bending. Part 2: Taber-type tester
12/17/2014 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 2758:2014
Paper - Determination of bursting strength (ISO 2758:2014)
11/26/2014 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 2758:2014
Paper - Determination of bursting strength (ISO 2758:2014)
11/26/2014 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 2759:2014
Board - Determination of bursting strength (ISO 2759:2014)
11/26/2014 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 2759:2014
Board - Determination of bursting strength (ISO 2759:2014)
11/26/2014 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN ISO 14453:2014
Pulps - Determination of acetone-soluble matter (ISO 14453:2014)
11/19/2014 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 14453:2014
Pulps - Determination of acetone-soluble matter (ISO 14453:2014)
11/19/2014 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 16418:2014 (R2020)
Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)
11/19/2014 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 16418:2014 (R2020)
Paper and board - Determination of the cytotoxicity of aqueous extracts using a metabolically competent hepatoma cell line (HepG2)
11/19/2014 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 16453:2014 (R2020)
Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard
7/9/2014 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 16453:2014 (R2020)
Pulp, paper and paperboard - Determination of phthalates in extracts from paper and paperboard
7/9/2014 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 643:2014
Paper and board - European list of standard grades of paper and board for recycling
6/18/2014 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 643:2014
Paper and board - European list of standard grades of paper and board for recycling
6/18/2014 - PDF - English - AENOR
Learn More€81.60 -
UNE-ISO 2493-1:2014 (R2020)
Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection
5/7/2014 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-ISO 4046-5:2014
Paper, board, pulps and related terms. Vocabulary. Part 5: Properties of pulp, paper and board
4/29/2014 - PDF - Spanish - AENOR
Learn More€74.00 -
€25.00 -
UNE-ISO 15359:2014 (R2021)
Paper and board. Determination of the static and kinetic coefficients of friction. Horizontal plane method
3/26/2014 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-ISO 6588-1:2013 (R2019)
Paper, board and pulps. Determination of pH of aqueous extracts. Part 1: Cold extraction
12/11/2013 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-ISO 6588-2:2013 (R2019)
Paper, board and pulps. Determination of pH of aqueous extracts. Part 2: Hot extraction
12/11/2013 - PDF - Spanish - AENOR
Learn More€53.00 -
€27.00 -
UNE 57140:2013 (R2019)
Coated paper. Determination of its performance for being used as labels for reusable packages.
12/11/2013 - PDF - Spanish - AENOR
Learn More€17.00 -
UNE-ISO 3039:2013 (R2021)
Corrugated fibreboard. Determination of the grammage of the component papers after separation
12/4/2013 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN ISO 217:2013
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)
11/20/2013 - PDF - Spanish - AENOR
Learn More€46.00 -
UNE-EN ISO 217:2013
Paper - Untrimmed sizes - Designation and tolerances for primary and supplementary ranges, and indication of machine direction (ISO 217:2013)
11/20/2013 - PDF - English - AENOR
Learn More€55.20 -
UNE-CEN/TR 15645-3:2013 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
10/29/2013 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-CEN/TR 15645-3:2013 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the off-flavour test - Part 3: Dry food
10/29/2013 - PDF - English - AENOR
Learn More€99.60 -
UNE 57073:2013 (R2019)
Paper and board. Water absorbency determination for absorbent papers (Drop test)
9/25/2013 - PDF - Spanish - AENOR
Learn More€25.00 -
€46.00 -
UNE 57115-2:2013 (R2019)
Pulp, paper and board. Determination of calcium content. Part 2: Spectrometric method.
4/24/2013 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-EN ISO 1974:2013
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
1/30/2013 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 1974:2013
Paper - Determination of tearing resistance - Elmendorf method (ISO 1974:2012)
1/30/2013 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 1034-21:2012 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 21: Coating machines (Endorsed by AENOR in October of 2012.)
10/1/2012 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN 1034-17:2012 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 17: Tissue making machines (Endorsed by AENOR in October of 2012.)
10/1/2012 - PDF - English - AENOR
Learn More€78.00 -
UNE-EN 1034-27:2012 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 27: Roll handling systems (Endorsed by AENOR in October of 2012.)
10/1/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-ISO 2470-1:2012
Paper, board and pulps - Measurement of diffuse blue reflectance factor - Part 1: Indoor daylight conditions (ISO brightness)
9/5/2012 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-ISO 8787:2012 (R2019)
Paper and board. Determination of capillary rise. Klemm method
9/5/2012 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-ISO 15754:2012 (R2019)
Paper and board - Determination of z-directional tensile strength
9/5/2012 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN ISO 534:2012
Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
7/4/2012 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN ISO 534:2012
Paper and board - Determination of thickness, density and specific volume (ISO 534:2011)
7/4/2012 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 1034-3:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
5/9/2012 - PDF - Spanish - AENOR
Learn More€83.00 -
UNE-EN 1034-3:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 3: Rereelers and winders
5/9/2012 - PDF - English - AENOR
Learn More€99.60 -
UNE-EN 1034-26:2012 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 26: Roll packaging machines (Endorsed by AENOR in May of 2012.)
5/1/2012 - PDF - English - AENOR
Learn More€69.00 -
UNE-EN ISO 3035:2012
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
4/25/2012 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN ISO 3035:2012
Corrugated fibreboard - Determination of flat crush resistance (ISO 3035:2011)
4/25/2012 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 1034-8:2012 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 8: Refining plants (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€63.00 -
UNE-EN 1034-16:2012
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 16: Paper and board making machines (Endorsed by AENOR in April of 2012.)
4/1/2012 - PDF - English - AENOR
Learn More€84.00 -
UNE-EN ISO 15320:2012
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
2/15/2012 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 15320:2012
Pulp, paper and board - Determination of pentachlorophenol in an aqueous extract (ISO 15320:2011)
2/15/2012 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 5264-2:2011
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011)
10/5/2011 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 5264-2:2011
Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011)
10/5/2011 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 1010-1:2005+A1:2011 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
9/21/2011 - PDF - Spanish - AENOR
Learn More€101.00 -
UNE-EN 1010-1:2005+A1:2011 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements
9/21/2011 - PDF - English - AENOR
Learn More€121.20 -
UNE-ISO 11093-9:2011 (R2019)
Paper and board - Testing of cores - Part 9: Determination of flat crush resistance
9/14/2011 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-ISO 11093-4:2011
Paper and board - Testing of cores. Part 4: Measurement of dimensiones
9/14/2011 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 12625-8:2011
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
5/11/2011 - PDF - Spanish - AENOR
Learn More€57.00 -
UNE-EN ISO 12625-8:2011
Tissue paper and tissue products - Part 8: Water-absorption time and water-absorption capacity, basket-immersion test method (ISO 12625-8:2010)
5/11/2011 - PDF - English - AENOR
Learn More€68.40 -
UNE-ISO 9416:2011 (R2017)
Paper - Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)
3/23/2011 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-EN 1010-2:2006+A1:2011 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
1/26/2011 - PDF - Spanish - AENOR
Learn More€105.00 -
UNE-EN 1010-2:2006+A1:2011 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery
1/26/2011 - PDF - English - AENOR
Learn More€126.00 -
UNE-CEN/TR 15645-1:2011 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
1/12/2011 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-CEN/TR 15645-1:2011 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the odour test - Part 1: Odour
1/12/2011 - PDF - English - AENOR
Learn More€88.80 -
UNE-CEN/TR 15645-2:2011 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
1/12/2011 - PDF - Spanish - AENOR
Learn More€78.00 -
UNE-CEN/TR 15645-2:2011 IN
Paper and board intended to come into contact with foodstuffs - Calibration of the off flavour test - Part 2: Fatty food
1/12/2011 - PDF - English - AENOR
Learn More€93.60 -
UNE-ISO 11475:2010 (R2017)
Paper and board. Determination of CIE whiteness, D65/10° (outdoor daylight)
6/29/2010 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 13023:2004+A1:2010
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
6/23/2010 - PDF - Spanish - AENOR
Learn More€102.00 -
UNE-EN 13023:2004+A1:2010
Noise measurement methods for printing, paper converting, paper making machines and auxiliary equipment - Accuracy grades 2 and 3
6/23/2010 - PDF - English - AENOR
Learn More€122.40 -
UNE-EN 1034-7:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
6/9/2010 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 1034-7:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 7: Chests
6/9/2010 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 1034-2:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
6/9/2010 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 1034-2:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 2: Barking drums
6/9/2010 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 1034-5:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
6/9/2010 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN 1034-5:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 5: Sheeters
6/9/2010 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN 1034-6:2006+A1:2010
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
6/9/2010 - PDF - Spanish - AENOR
Learn More€71.00 -
UNE-EN 1034-6:2006+A1:2010
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 6: Calender
6/9/2010 - PDF - English - AENOR
Learn More€85.20 -
UNE-EN 1034-13:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
6/9/2010 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 1034-13:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 13: Machines for de-wiring bales and units
6/9/2010 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 1034-14:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
6/9/2010 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 1034-14:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 14: Reel splitter
6/9/2010 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 1034-22:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
6/9/2010 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN 1034-22:2006+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of paper making and finishing machines - Part 22: Wood Grinders
6/9/2010 - PDF - English - AENOR
Learn More€75.60 -
UNE-EN 1230-1:2010 (R2020)
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
6/2/2010 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-EN 1230-1:2010 (R2020)
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 1: Odour
6/2/2010 - PDF - English - AENOR
Learn More€62.40 -
UNE-EN 1230-2:2010 (R2020)
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
6/2/2010 - PDF - Spanish - AENOR
Learn More€68.00 -
UNE-EN 1230-2:2010 (R2020)
Paper and board intended to come into contact with foodstuffs - Sensory analysis - Part 2: Off-flavour (taint)
6/2/2010 - PDF - English - AENOR
Learn More€81.60 -
UNE-EN 1010-3:2003+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
3/10/2010 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 1010-3:2003+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
3/10/2010 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 1010-4:2004+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
3/10/2010 - PDF - Spanish - AENOR
Learn More€113.00 -
UNE-EN 1010-4:2004+A1:2010 (R2018)
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
3/10/2010 - PDF - English - AENOR
Learn More€135.60 -
UNE-EN ISO 8254-1:2009
Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
11/4/2009 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN ISO 8254-1:2009
Paper and board - Measurement of specular gloss - Part 1: 75 degree gloss with a converging beam, TAPPI method (ISO 8254-1:2009)
11/4/2009 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN ISO 1924-2:2009
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)
7/29/2009 - PDF - Spanish - AENOR
Learn More€63.00 -
UNE-EN ISO 1924-2:2009
Paper and board - Determination of tensile properties - Part 2: Constant rate of elongation method (20 mm/min) (ISO 1924-2:2008)
7/29/2009 - PDF - English - AENOR
Learn More€75.60 -
UNE-ISO 11480:2009 (R2017)
Pulp, paper and board -- Determination of total chlorine and organically bound chlorine
7/22/2009 - PDF - Spanish - AENOR
Learn More€52.00 -
UNE-ISO 1924-3:2008 (R2015)
Paper and board -- Determination of tensile properties -- Part 3: Constant rate of elongation method (100 mm/min)
10/29/2008 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-ISO 13820:2008 (R2015)
Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment
10/29/2008 - PDF - Spanish - AENOR
Learn More€49.00 -
UNE-ISO 6587:2008 ERRATUM:2008 (R2015)
Paper, board and pulps. Determination of conductivity of aqueous extracts.
7/30/2008 - PDF - Spanish - AENOR
Learn More€0.00 -
UNE-ISO 6587:2008 (R2015)
Paper, board and pulps. Determination of conductivity of aqueous extracts.
6/11/2008 - PDF - Spanish - AENOR
Learn More€39.00 -
UNE-ISO 3689:2008 (R2015)
Paper and board -- Determination of bursting strength after immersion in water. (ISO 3689:1983)
6/11/2008 - PDF - Spanish - AENOR
Learn More€27.00 -
UNE-ISO 13542:2008 (R2021)
Paper and board -- Specification for internal diameters of cores for reels.
6/11/2008 - PDF - Spanish - AENOR
Learn More€16.00
