83.160.01 : Tyres in general
-
BS ISO 24163-1:2024
Clamp-in tyre valves for pressure monitoring systems Definition, types, dimensions and valve interface
3/19/2024 - PDF - English - BSI
Learn More€180.00 -
PR NF EN 17189, T47-767PR (02/2024)
Matériaux obtenus à partir de pneus usagés non réutilisables (PUNR) - Détermination de la densité vraie des granulats et des poudrettes - Méthode basée sur la pycnométrie à eau
2/1/2024 - Paper - English, French - AFNOR
Learn More€64.50 -
NBN ISO 14960-1:2024
Tubeless tyres — Valves and components — Part 1: Snap-in tyre valves test methods ISO 14960-1:2023
1/25/2024 - PDF - English - NBN
Learn More€89.00 -
BS ISO 14960-2:2024 + Redline
Tracked Changes. Tubeless tyres. Valves and components Clamp-in tubeless tyre valve. Test methods
1/18/2024 - PDF - English - BSI
Learn More€235.00 -
BS ISO 24163-2:2024
Clamp-in tyre valves for pressure monitoring systems Test methods and performance
1/17/2024 - PDF - English - BSI
Learn More€180.00 -
BS ISO 14960-2:2024
Tubeless tyres. Valves and components Clamp-in tubeless tyre valve. Test methods
1/16/2024 - PDF - English - BSI
Learn More€180.00 -
PR NF EN 17188, T47-755PR (01/2024)
Matériaux obtenus à partir de pneus usagés non réutilisables (PUNR) - Méthode d'échantillonnage de granulats et de poudrettes stockés dans des big-bags et des sacs
1/1/2024 - Paper - English, French - AFNOR
Learn More€74.00 -
DIN EN 17189:2023-12
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry, German and English version prEN 17189:2023
12/1/2023 - PDF - English, German - DIN
Learn More€59.63 -
23/30469874 DC:2023
BS EN 17189 Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates and powders - Method based on water pycnometry
11/30/2023 - PDF - English - BSI
Learn More€24.00 -
BS ISO 14960-1:2023 + Redline
Tracked Changes. Tubeless tyres. Valves and components Snap-in tyre valves test methods
11/14/2023 - PDF - English - BSI
Learn More€235.00 -
BS ISO 14960-1:2023
Tubeless tyres. Valves and components Snap-in tyre valves test methods
11/10/2023 - PDF - English - BSI
Learn More€180.00 -
23/30469871 DC:2023
BS EN 17188. Materials obtained from End-of-Life Tyres (ELT). Sampling method for granulates and powders stored in big-bags and small-bags
11/2/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN 17188:2023-11
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags and small-bags, German and English version prEN 17188:2023
11/1/2023 - PDF - English, German - DIN
Learn More€79.72 -
23/30481478 DC:2023
BS EN 17308 Materials produced from end of life tyres. Steel wire. Determination of the non-metallic content
10/12/2023 - PDF - English - BSI
Learn More€24.00 -
DIN EN 17308:2023-10
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content, German and English version prEN 17308:2023
10/1/2023 - PDF - English, German - DIN
Learn More€85.79 -
PR NF EN 16916, E63-524PR (09/2023)
Matériaux obtenus à partir de pneus usagés non réutilisables (PUNR) - Détermination des exigences spécifiques relatives à l'échantillonnage et détermination de la teneur en humidité selon la méthode de séchage à l'étuve
9/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
ASTM F2493-23
Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
9/1/2023 - PDF - English - ASTM
Learn More€48.00 -
ASTM F2493-23 + Redline
Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
9/1/2023 - PDF - English - ASTM
Learn More€57.00 -
NBN ISO 24469:2023
Essai d'usure des routes par des pneumatiques cloutés/cramponnés ISO 24469:2023
8/23/2023 - PDF - French - NBN
Learn More€58.00 -
€58.00
-
PR NF ISO 22638, T43-124PR (08/2023)
Caoutchouc - Génération et collecte des particules émises par l'usure des pneumatiques et de la route (TRWP) - Méthode de simulation routière en laboratoire
8/1/2023 - Paper - English, French - AFNOR
Learn More€64.50 -
BS ISO 22640:2023 + Redline
Tracked Changes. Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
7/27/2023 - PDF - English - BSI
Learn More€235.00 -
BS ISO 22640:2023
Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
7/26/2023 - PDF - English - BSI
Learn More€180.00 -
23/30476784 DC:2023
BS EN 16916. Materials obtained from End of Life Tyres. Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
7/14/2023 - PDF - English - BSI
Learn More€24.00 -
NF ISO 22640, T43-125 (07/2023)
Caoutchouc - Lignes directrices pour la caractérisation physique et chimique des particules émises par l'usure des pneumatiques et de la route (TRWP)
7/1/2023 - Paper - French - AFNOR
Learn More€60.67 -
DIN EN 16916:2023-07
Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method, German and English version prEN 16916:2023
7/1/2023 - PDF - English, German - DIN
Learn More€59.63 -
23/30448662 DC:2023
BS ISO 22638. Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
6/5/2023 - PDF - English - BSI
Learn More€24.00 -
ASTM D6477-23
Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
6/1/2023 - PDF - English - ASTM
Learn More€54.00 -
ASTM D6477-23 + Redline
Standard Terminology Relating to Tire Cord, Bead Wire, Hose Reinforcing Wire, and Fabrics
6/1/2023 - PDF - English - ASTM
Learn More€65.00 -
23/30436364 DC:2023
BS ISO 14960-2. Tubeless tyres. Valves and components Part 2. Clamp-in tubeless tyre valve-test methods
5/12/2023 - PDF - English - BSI
Learn More€24.00 -
€180.00
-
NBN ISO 21634:2023
Flaps en caoutchouc pour pneumatiques – Exigences et méthodes d’essai ISO 21634:2022
3/28/2023 - PDF - French - NBN
Learn More€89.00 -
NBN ISO 21634:2023
Rubber flaps for tyres — Requirements and test methods ISO 21634:2022
3/28/2023 - PDF - English - NBN
Learn More€89.00 -
22/30436137 DC:2022
BS ISO 24163-1. Clamp-in tyre valves for tire pressure monitoring systems Part 1. Definition, types, dimensions and valve interface
12/13/2022 - PDF - English - BSI
Learn More€24.00 -
22/30436151 DC:2022
BS ISO 24163-2. Clamp-in Tyre Valves For Pressure Monitoring Systems Part 2. Test methods and performance
11/29/2022 - PDF - English - BSI
Learn More€24.00 -
22/30436361 DC:2022
BS ISO 14960-1. Tubeless tyres. Valves and components Part 1. Test methods
11/29/2022 - PDF - English - BSI
Learn More€24.00 -
€180.00
-
ASTM F538-22
Standard Terminology Relating to Characteristics and Performance of Tires
10/1/2022 - PDF - English - ASTM
Learn More€60.00 -
ASTM F538-22 + Redline
Standard Terminology Relating to Characteristics and Performance of Tires
10/1/2022 - PDF - English - ASTM
Learn More€72.00 -
ASTM F3611-22e1
Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
10/1/2022 - PDF - English - ASTM
Learn More€48.00 -
ASTM F3611-22e1 + Redline
Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
10/1/2022 - PDF - English - ASTM
Learn More€57.00 -
22/30448665 DC:2022
BS ISO 22640. Rubber. Framework for physical and chemical characterization of tyre and road wear particles (TRWP)
6/29/2022 - PDF - English - BSI
Learn More€24.00 -
€89.00
-
NBN ISO 18885-3:2022
TPMS snap-in valves — Part 3: Performances ISO 18885-3:2021
5/13/2022 - PDF - English - NBN
Learn More€89.00 -
€235.00
-
€75.67
-
€180.00
-
DIN ISO 4223-1:2021-11
Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres (ISO 4223-1:2017)
11/1/2021 - PDF - German - DIN
Learn More€85.79 -
ASTM F1806-21
Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
9/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F1806-21 + Redline
Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
9/1/2021 - PDF - English - ASTM
Learn More€61.00 -
NBN ISO 23475-1:2021
Testing method for steel tyre cord — Part 1: General requirements ISO 23475-1:2021
6/17/2021 - PDF - English - NBN
Learn More€121.00 -
€24.00
-
NBN ISO 17832:2021
Non-parallel steel wire and cords for tyre reinforcement ISO 17832:2018
6/3/2021 - PDF - English - NBN
Learn More€89.00 -
ASTM F3015-21
Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
4/1/2021 - PDF - English - ASTM
Learn More€51.00 -
ASTM F3015-21 + Redline
Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
4/1/2021 - PDF - English - ASTM
Learn More€61.00 -
€250.00
-
NF ISO 4223-2/A1, R12-712-2/A1 (01/2021)
Definitions of some terms used in the tyre industry - Part 2 : solid tyres - AMENDMENT 1
1/1/2021 - Paper - French - AFNOR
Learn More€25.50 -
NF ISO 3877-4/A1, R12-711-4/A1 (01/2021)
Tyres, valves and tubes - List of equivalent terms - Part 4 : solid tyres - Amendment 1
1/1/2021 - Paper - French - AFNOR
Learn More€25.50 -
NF ISO 3877-4, R12-711-4 (12/2020)
Tyres, valves and tubes - List of equivalent terms - Part 4 : Solid tyres
12/1/2020 - Paper - English, French, Russian - AFNOR
Learn More€43.50 -
XP CEN/TS 17510, T47-769 (12/2020)
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorptionX
12/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
XP CEN/TS 17045, T47-771 (12/2020)
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes
12/1/2020 - Paper - French - AFNOR
Learn More€60.67 -
ASTM G105-20
Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
12/1/2020 - PDF - English - ASTM
Learn More€51.00 -
ASTM G105-20 + Redline
Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests
12/1/2020 - PDF - English - ASTM
Learn More€61.00 -
DIN CEN/TS 17510:2020-12
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption, German version CEN/TS 17510:2020
12/1/2020 - PDF - German - DIN
Learn More€42.43 -
DIN CEN/TS 17045:2020-12
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes, German version CEN/TS 17045:2020
12/1/2020 - PDF - German - DIN
Learn More€63.64 -
UNE-CEN/TS 17045:2020
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes (Endorsed by Asociación Española de Normalización in December of 2020.)
12/1/2020 - PDF - English - AENOR
Learn More€62.00 -
UNE-CEN/TS 17510:2020
Materials obtained from End-of-Life Tyres - Determination of the specific surface area of powders - Method based on krypton adsorption (Endorsed by Asociación Española de Normalización in December of 2020.)
12/1/2020 - PDF - English - AENOR
Learn More€46.00 -
€37.00
-
NBN ISO 18885-1:2020
TPMS snap-in valves — Part 1: Identification ISO 18885-1:2017
11/19/2020 - PDF - English - NBN
Learn More€37.00 -
€205.00
-
€205.00
-
€37.00
-
NBN ISO 18885-2:2020
TPMS snap-in valves — Part 2: Valve environment ISO 18885-2:2018
10/22/2020 - PDF - English - NBN
Learn More€37.00 -
BS ISO 4223-2:1991+A1:2020
Definitions of some terms used in the tyre industry Solid tyres
10/14/2020 - PDF - English - BSI
Learn More€151.00 -
PD CEN/TS 17510:2020
Materials obtained from end-of-life tyres. Determination of the specific surface area of powders. Method based on krypton adsorption
10/14/2020 - PDF - English - BSI
Learn More€151.00 -
PD CEN/TS 17045:2020
Materials obtained from end-of-life tyres. Quality criteria for the selection of whole tyres, for recovery and recycling processes
10/13/2020 - PDF - English - BSI
Learn More€180.00 -
CEN/TS 17045:2020
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes
10/9/2020 - PDF - French - NBN
Learn More€89.00 -
CEN/TS 17045:2020
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes
10/9/2020 - PDF - German - NBN
Learn More€89.00 -
CEN/TS 17045:2020
Materials obtained from end-of-life tyres - Quality criteria for the selection of whole tyres, for recovery and recycling processes
10/9/2020 - PDF - English - NBN
Learn More€89.00 -
CEN/TS 17510:2020
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
10/9/2020 - PDF - French - NBN
Learn More€58.00 -
CEN/TS 17510:2020
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
10/9/2020 - PDF - German - NBN
Learn More€58.00 -
CEN/TS 17510:2020
Materials obtained from end-of-life tyres - Determination of the specific surface area of powders - Method based on krypton adsorption
10/9/2020 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 16392:2020
Tyres ? Electrical resistance ? Test method for measuring electrical resistance of tyres on a test rig
9/23/2020 - PDF - French - NBN
Learn More€58.00 -
NBN ISO 16392:2020
Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig ISO 16392:2017
9/23/2020 - PDF - English - NBN
Learn More€58.00 -
FD CEN/TR 17511, T47-768 (09/2020)
Materials obtained from End-of-Life Tyres - Odour of ELT granulates - Origin and remediation possibilities
9/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
ASTM D6270-20
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
9/1/2020 - PDF - English - ASTM
Learn More€74.00 -
ASTM D6270-20 + Redline
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
9/1/2020 - PDF - English - ASTM
Learn More€87.00 -
UNE-CEN/TR 17509:2020
Materials obtained from End-of-Life Tyres - Granulated rubber - Determination of textile fiber content by visual index (qualitative method) (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€70.00 -
UNE-CEN/TR 17511:2020
Materials obtained from End-of-Life Tyres - Odour of ELT granulates - Origin and remediation possibilities (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English - AENOR
Learn More€46.00 -
€89.00
-
NBN ISO 20912:2020
Conformance test methods for RFID enabled tyres ISO 20912:2020
8/27/2020 - PDF - English - NBN
Learn More€89.00 -
NBN ISO 20911:2020
Radio frequency identification (RFID) tyre tags ? Tyre attachment classification
8/27/2020 - PDF - French - NBN
Learn More€37.00 -
NBN ISO 20911:2020
Radio frequency identification (RFID) tyre tags — Tyre attachment classification ISO 20911:2020
8/27/2020 - PDF - English - NBN
Learn More€37.00 -
€121.00
-
NBN ISO 18807:2020
Tyres and rims for logging and forestry service ISO 18807:2019
8/27/2020 - PDF - English - NBN
Learn More€121.00 -
BS ISO 3877-4:1984+A1:2020
Tyres, valves and tubes. List of equivalent terms Solid tyres
8/14/2020 - PDF - English - BSI
Learn More€180.00 -
NF ISO 20911, U12-011 (08/2020)
Radio frequency identification (RFID) tyre tags - Tyre attachment classification
8/1/2020 - Paper - French - AFNOR
Learn More€48.00 -
€75.67
-
NBN ISO 20910:2020
Coding for radio frequency identification (RFID) tyre tags
7/29/2020 - PDF - French - NBN
Learn More€58.00 -
NBN ISO 20910:2020
Coding for radio frequency identification (RFID) tyre tags ISO 20910:2019
7/29/2020 - PDF - English - NBN
Learn More€58.00 -
€58.00
-
NBN ISO 20909:2020
Radio frequency identification (RFID) tyre tags ISO 20909:2019
7/29/2020 - PDF - English - NBN
Learn More€58.00 -
NBN ISO 28580:2020
Passenger car, truck and bus tyre rolling resistance measurement method ? Single point test and correlation of measurement results
6/25/2020 - PDF - French - NBN
Learn More€142.00 -
NBN ISO 28580:2020
Passenger car, truck and bus tyre rolling resistance measurement method — Single point test and correlation of measurement results ISO 28580:2018
6/25/2020 - PDF - English - NBN
Learn More€142.00 -
€167.00
-
UNE-CEN/TS 17189:2018
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More€42.00 -
BS ISO 20911:2020
Radio frequency identification (RFID) tyre tags. Tyre attachment classification
4/22/2020 - PDF - English - BSI
Learn More€180.00 -
€250.00
-
UNE-CEN/TS 17307:2020 EX
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
4/22/2020 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-CEN/TS 17307:2020 EX
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
4/22/2020 - PDF - English - AENOR
Learn More€69.60 -
NF ISO 4223-2, R12-712-2 (03/2020)
Definitions of some terms used in the tyre industry - Part 2 : solid tyres
3/1/2020 - Paper - French - AFNOR
Learn More€25.50 -
BS ISO 28580:2018 + Redline
Tracked Changes. Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
2/27/2020 - PDF - English - BSI
Learn More€382.00 -
BS ISO 16392:2017 + Redline
Tracked Changes. Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
2/26/2020 - PDF - English - BSI
Learn More€235.00 -
€398.00
-
UNE-EN 14243-1:2019
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
11/6/2019 - PDF - Spanish - AENOR
Learn More€58.00 -
UNE-EN 14243-1:2019
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
11/6/2019 - PDF - English - AENOR
Learn More€69.60 -
UNE-EN 14243-2:2019
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
11/6/2019 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE-EN 14243-2:2019
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
11/6/2019 - PDF - English - AENOR
Learn More€88.80 -
UNE-EN 14243-3:2019
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
11/6/2019 - PDF - Spanish - AENOR
Learn More€70.00 -
UNE-EN 14243-3:2019
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
11/6/2019 - PDF - English - AENOR
Learn More€84.00 -
€48.00
-
NF ISO 20910, R12-759 (11/2019)
Coding for radio frequency identification (RFID) tyre tags - Codage de tags d'identification de pneumatiques par radiofréquence(RFID)
11/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
€180.00
-
BS ISO 20910:2019
Coding for radio frequency identification (RFID) tyre tags
8/9/2019 - PDF - English - BSI
Learn More€180.00 -
XP CEN/TS 17308, E59-003 (08/2019)
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
8/1/2019 - Paper - French - AFNOR
Learn More€75.67 -
DIN CEN/TS 17307*DIN SPEC 3759:2019-07
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution: German version CEN/TS 17307:2019
7/1/2019 - PDF - German - DIN
Learn More€42.43 -
DIN CEN/TS 17308*DIN SPEC 3758:2019-06
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content, German version CEN/TS 17308:2019
6/1/2019 - PDF - German - DIN
Learn More€73.93 -
DIN EN 14243-1:2019-05
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities, German version EN 14243-1:2019
5/1/2019 - PDF - German - DIN
Learn More€65.89 -
DIN EN 14243-2:2019-05
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distributions and impurities, including free steel and free textile content, German version EN 14243-2:2019
5/1/2019 - PDF - German - DIN
Learn More€104.95 -
DIN EN 14243-3:2019-05
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions, German version EN 14243-3:2019
5/1/2019 - PDF - German - DIN
Learn More€85.79 -
PD CEN/TS 17307:2019
Material derived from End-of-Life tyres. Granulates and powders. Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
4/24/2019 - PDF - English - BSI
Learn More€151.00 -
PD CEN/TS 17308:2019
Materials produced from end of life tyres. Steel wire. Determination of the non-metallic content
4/15/2019 - PDF - English - BSI
Learn More€250.00 -
CEN/TS 17308:2019
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
4/9/2019 - PDF - French - NBN
Learn More€121.00 -
CEN/TS 17308:2019
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
4/9/2019 - PDF - German - NBN
Learn More€121.00 -
CEN/TS 17308:2019
Materials produced from end of life tyres - Steel wire - Determination of the non-metallic content
4/9/2019 - PDF - English - NBN
Learn More€121.00 -
UNE-CEN/TS 17188:2019
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
4/3/2019 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-CEN/TS 17188:2019
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
4/3/2019 - PDF - English - AENOR
Learn More€72.00 -
CEN/TS 17307:2019
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
3/29/2019 - PDF - French - NBN
Learn More€58.00 -
CEN/TS 17307:2019
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
3/29/2019 - PDF - German - NBN
Learn More€58.00 -
CEN/TS 17307:2019
Material derived from End-of-Life tyres - Granulates and powders - Elastomers identification: Gas-chromatography and mass-spectrometric detection of pyrolysis products in solution
3/29/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 14243-2:2019
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
3/26/2019 - PDF - French - NBN
Learn More€142.00 -
NBN EN 14243-2:2019
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
3/26/2019 - PDF - German - NBN
Learn More€142.00 -
NBN EN 14243-2:2019
Materials obtained from end of life tyres - Part 2: Granulates and powders - Methods for determining the particle size distribution and impurities, including free steel and free textile content
3/26/2019 - PDF - English - NBN
Learn More€142.00 -
NBN EN 14243-1:2019
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
3/26/2019 - PDF - French - NBN
Learn More€58.00 -
NBN EN 14243-1:2019
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
3/26/2019 - PDF - German - NBN
Learn More€58.00 -
NBN EN 14243-1:2019
Materials obtained from end of life tyres - Part 1: General definitions related to the methods for determining their dimension(s) and impurities
3/26/2019 - PDF - English - NBN
Learn More€58.00 -
NBN EN 14243-3:2019
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
3/26/2019 - PDF - French - NBN
Learn More€121.00 -
NBN EN 14243-3:2019
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
3/26/2019 - PDF - German - NBN
Learn More€121.00 -
NBN EN 14243-3:2019
Materials obtained from end of life tyres - Part 3: Shreds, cuts and chips - Methods for determining their dimension(s) including protruding filaments dimensions
3/26/2019 - PDF - English - NBN
Learn More€121.00 -
BS EN 14243-1:2019
Materials obtained from end of life tyres General definitions related to the methods for determining their dimension(s) and impurities
3/15/2019 - PDF - English - BSI
Learn More€151.00 -
BS EN 14243-2:2019
Materials obtained from end of life tyres Granulates and powders. Methods for determining the particle size distribution impurities, including free steel textile content
3/15/2019 - PDF - English - BSI
Learn More€250.00 -
BS EN 14243-3:2019
Materials obtained from end of life tyres Shreds, cuts and chips. Methods for determining their dimension(s) including protruding filaments dimensions
3/15/2019 - PDF - English - BSI
Learn More€180.00 -
XP ISO/TS 22687, T43-126 (02/2019)
Rubber - Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
2/1/2019 - Paper - French - AFNOR
Learn More€75.50 -
ASTM D6700-19
Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
2/1/2019 - PDF - English - ASTM
Learn More€51.00 -
ASTM D6700-19 + Redline
Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
2/1/2019 - PDF - English - ASTM
Learn More€61.00 -
XP CEN/TS 17188, T47-755 (12/2018)
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
12/1/2018 - Paper - French - AFNOR
Learn More€60.67 -
SAE J 2717:2018-11-20
Tests to Define Tire Size (Geometry), Mass, Inertias (Stabilized: Nov 2018)
11/20/2018 - PDF - English - SAE
Learn More€107.00 -
XP ISO/TS 22638, T43-124 (11/2018)
Rubber - Generation and collection of tyre and road wear particles (TRWP) - Road simulator laboratory method
11/1/2018 - Paper - French - AFNOR
Learn More€48.00 -
€151.00
-
€48.00
-
€48.00
-
PD ISO/TS 22687:2018
Rubber. Framework for assessing the environmental fate of tyre and road wear particles (TRWP)
8/13/2018 - PDF - English - BSI
Learn More€180.00 -
DIN CEN/TS 17189*DIN SPEC 78003:2018-08
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry, German version CEN/TS 17189:2018
8/1/2018 - PDF - German - DIN
Learn More€42.43 -
DIN CEN/TS 17188*DIN SPEC 78002:2018-08
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags, German version CEN/TS 17188:2018
8/1/2018 - PDF - German - DIN
Learn More€47.66 -
PD ISO/TS 22638:2018
Rubber. Generation and collection of tyre and road wear particles (TRWP). Road simulator laboratory method
7/16/2018 - PDF - English - BSI
Learn More€180.00 -
BS ISO 28580:2018
Passenger car, truck and bus tyre rolling resistance measurement method. Single point test and correlation of measurement results
7/9/2018 - PDF - English - BSI
Learn More€293.00 -
ISO 28580:2018
Passenger car, truck and bus tyre rolling resistance measurement method
Single point test and correlation of measurement results
7/5/2018 - Paper - French - ISO
Learn More€174.00 -
ISO 28580:2018
Passenger car, truck and bus tyre rolling resistance measurement method
Single point test and correlation of measurement results
7/5/2018 - Paper - English - ISO
Learn More€174.00 -
NF ISO 4223-1, R12-712-1 (07/2018)
Definitions of some terms used in the tyre industry - Part 1 : pneumatic tyres
7/1/2018 - Paper - French - AFNOR
Learn More€73.23 -
PD CEN/TS 17188:2018
Materials obtained from end of life tyres (ELT). Sampling method for granulates and powders stored in big-bags
6/25/2018 - PDF - English - BSI
Learn More€151.00 -
PD CEN/TS 17189:2018
Materials obtained from end of life tyres (ELT). Determination of the true density of granulates. Method based on water pycnometry
6/25/2018 - PDF - English - BSI
Learn More€151.00 -
CEN/TS 17189:2018
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
6/18/2018 - PDF - German - NBN
Learn More€58.00 -
CEN/TS 17189:2018
Materials obtained from end of life tyres (ELT) - Determination of the true density of granulates - Method based on water pycnometry
6/18/2018 - PDF - English - NBN
Learn More€58.00 -
CEN/TS 17189:2018
Matériaux obtenus à partir de pneus usagés non réutilisables (PUNR) - Détermination de la densité vraie des granulats - Méthode basée sur la pycnométrie à eau
6/18/2018 - PDF - French - NBN
Learn More€58.00 -
CEN/TS 17188:2018
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
6/15/2018 - PDF - German - NBN
Learn More€58.00 -
CEN/TS 17188:2018
Materials obtained from end of life tyres (ELT) - Sampling method for granulates and powders stored in big-bags
6/15/2018 - PDF - English - NBN
Learn More€58.00 -
CEN/TS 17188:2018
Matériaux obtenus à partir de pneus usagés non réutilisables (PUNR) - Méthode d'échantillonnage de granulats et de poudrettes stockés dans des big-bags
6/15/2018 - PDF - French - NBN
Learn More€58.00 -
ASTM D2000-18
Standard Classification System for Rubber Products in Automotive Applications
6/1/2018 - PDF - English - ASTM
Learn More€81.00 -
ASTM D2000-18 + Redline
Standard Classification System for Rubber Products in Automotive Applications
6/1/2018 - PDF - English - ASTM
Learn More€95.00 -
€250.00
-
PD ISO/TS 21396:2017
Rubber. Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments. Pyrolysis-GC/MS method
2/7/2018 - PDF - English - BSI
Learn More€250.00 -
ASTM D4776/D4776M-18
Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
1/1/2018 - PDF - English - ASTM
Learn More€51.00 -
ASTM D4776/D4776M-18 + Redline
Standard Test Method for Adhesion of Tire Cords and Other Reinforcing Cords to Rubber Compounds by H-Test Procedure
1/1/2018 - PDF - English - ASTM
Learn More€61.00 -
ASTM D7760-18
Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
1/1/2018 - PDF - English - ASTM
Learn More€51.00 -
ASTM D7760-18 + Redline
Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter
1/1/2018 - PDF - English - ASTM
Learn More€61.00 -
BS ISO 4223-1:2017
Definitions of some terms used in the tyre industry Pneumatic tyres
12/22/2017 - PDF - English - BSI
Learn More€250.00 -
NF ISO 18885-1, R12-746-1 (12/2017)
TPMS snap-in valves - Part 1 : identification - Valves TPMS snap-in - Partie 1 : Identification
12/1/2017 - Paper - French - AFNOR
Learn More€32.49 -
UNE 69050:2017
Tyres, rims and valves. Tyre use cycle. Maintenance, repair and regrooving of tyres manual
11/29/2017 - PDF - Spanish - AENOR
Learn More€74.00 -
UNE 69051:2017
Tyres, rims and valves. Tyre use cycle. Second-hand tyres
11/29/2017 - PDF - Spanish - AENOR
Learn More€60.00 -
€151.00
-
NF ISO 16392, R12-751 (09/2017)
Tyres - Electrical resistance - Test method for measuring electrical resistance of tyres on a test rig
9/1/2017 - Paper - French - AFNOR
Learn More€58.62 -
€48.00
-
€48.00
-
BS ISO 16392:2017
Tyres. Electrical resistance. Test method for measuring electrical resistance of tyres on a test rig
6/28/2017 - PDF - English - BSI
Learn More€180.00 -
€72.00
-
€72.00
-
€89.00
-
PD CEN/TS 16916:2016
Materials obtained from End of Life Tyres. Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
8/31/2016 - PDF - English - BSI
Learn More€180.00 -
DIN CEN/TS 16916*DIN SPEC 2212:2016-08
Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method, German version CEN/TS 16916:2016
8/1/2016 - PDF - German - DIN
Learn More€52.80 -
CEN/TS 16916:2016
Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method
3/16/2016 - PDF - German - NBN
Learn More€58.00