83.140.01 : Rubber and plastics products in general
-
ASTM D6108-24 + Redline
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
2/1/2024 - PDF - English -
Learn More€71.00 -
ASTM D4803-24 + Redline
Standard Test Method for Predicting Heat Buildup in PVC Building Products
2/1/2024 - PDF - English -
Learn More€63.00 -
ASTM D6111-24
Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
2/1/2024 - PDF - English -
Learn More€60.00 -
ASTM D6109-24
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
2/1/2024 - PDF - English -
Learn More€60.00 -
ASTM D6108-24
Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
2/1/2024 - PDF - English -
Learn More€60.00 -
ASTM D6111-24 + Redline
Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
2/1/2024 - PDF - English -
Learn More€71.00 -
ASTM D4803-24
Standard Test Method for Predicting Heat Buildup in PVC Building Products
2/1/2024 - PDF - English -
Learn More€52.00 -
ASTM D6109-24 + Redline
Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
2/1/2024 - PDF - English -
Learn More€71.00 -
ASTM D6112-23
Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
11/1/2023 - PDF - English -
Learn More€86.00 -
ASTM D6112-23 + Redline
Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
11/1/2023 - PDF - English -
Learn More€103.00 -
ASTM D2565-23
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
10/1/2023 - PDF - English -
Learn More€60.00 -
ASTM D5418-23
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
10/1/2023 - PDF - English -
Learn More€52.00 -
ASTM D2565-23 + Redline
Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
10/1/2023 - PDF - English -
Learn More€71.00 -
ASTM D5418-23 + Redline
Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
10/1/2023 - PDF - English -
Learn More€63.00 -
ASTM F2418-23
Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
9/1/2023 - PDF - English -
Learn More€54.00 -
ASTM F2418-23 + Redline
Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
9/1/2023 - PDF - English -
Learn More€65.00 -
ASTM D6117-23 + Redline
Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
7/1/2023 - PDF - English -
Learn More€65.00 -
ASTM D6117-23
Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
7/1/2023 - PDF - English -
Learn More€54.00 -
ASTM D7211-23 + Redline
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
5/1/2023 - PDF - English -
Learn More€57.00 -
ASTM D7211-23
Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
5/1/2023 - PDF - English -
Learn More€48.00 -
ASTM D6826-23
Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
4/1/2023 - PDF - English -
Learn More€48.00 -
ASTM D6826-23 + Redline
Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
4/1/2023 - PDF - English -
Learn More€57.00 -
ASTM D6779-23
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
3/15/2023 - PDF - English -
Learn More€60.00 -
ASTM D6779-23 + Redline
Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
3/15/2023 - PDF - English -
Learn More€72.00 -
PR NF EN 17937, X70-001PR (03/2023)
Substances chimiques règlementées dans les produits - Détermination de la teneur en hydrocarbures aromatiques polycycliques (HAP) par chromatographie en phase gazeuse couplée à la spectrométrie de masse dans les articles en plastique et en caoutchouc fournis au grand public entrant en contact direct avec la peau humaine et la cavité buccale
3/1/2023 - Paper - English, French -
Learn More€88.50 -
DIN EN 17937:2023-02
Regulated chemicals in products - Determination of the content of polycyclic aromatic hydrocarbons (PAHs) by gas chromatography coupled to mass-spectrometry in plastic and rubber in articles supplied to the general public that come into direct contact with human skin and oral cavity, German and English version prEN 17937:2023
2/1/2023 - PDF - English, German -
Learn More€72.80 -
ASTM D7568-23
Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
2/1/2023 - PDF - English -
Learn More€60.00 -
ASTM D7568-23 + Redline
Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications
2/1/2023 - PDF - English -
Learn More€72.00 -
NBN ISO 3302-2:2023
Caoutchouc — Tolérances pour produits — Partie 2: Tolérances géométriques ISO 3302-2:2022
1/24/2023 - PDF - French -
Learn More€58.00 -
NBN ISO 3302-2:2023
Rubber — Tolerances for products — Part 2: Geometrical tolerances ISO 3302-2:2022
1/24/2023 - PDF - English -
Learn More€58.00 -
23/30464882 DC:2023
BS EN 17937. Regulated chemicals in products. Determination of the content of polycyclic aromatic hydrocarbons (PAHs) by gas chromatography coupled to mass-spectrometry in plastic and rubber in articles supplied to the general public that come into direct contact with human skin and oral cavity
1/19/2023 - PDF - English -
Learn More€24.00 -
€180.00
-
NF ISO 3302-2, T47-001-2 (07/2022)
Caoutchouc - Tolérances pour produits - Partie 2 : tolérances géométriques
7/1/2022 - Paper - French -
Learn More€60.67 -
€58.13
-
UNE-EN ISO 13000-2:2022
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
6/8/2022 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 13000-1:2022
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
6/8/2022 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 13000-2:2022
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
6/8/2022 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 13000-1:2022
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
6/8/2022 - PDF - Spanish -
Learn More€63.00 -
ASTM D7611/D7611M-21
Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
12/1/2021 - PDF - English -
Learn More€46.00 -
ASTM D4495-21 + Redline
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
12/1/2021 - PDF - English -
Learn More€61.00 -
ASTM D7611/D7611M-21 + Redline
Standard Practice for Coding Plastic Manufactured Articles for Resin Identification
12/1/2021 - PDF - English -
Learn More€53.00 -
ASTM D4495-21
Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
12/1/2021 - PDF - English -
Learn More€51.00 -
DIN EN ISO 13000-2:2021-11
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021), German version EN ISO 13000-2:2021
11/1/2021 - PDF - German -
Learn More€72.80 -
DIN EN ISO 13000-1:2021-11
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021), German version EN ISO 13000-1:2021
11/1/2021 - PDF - German -
Learn More€72.80 -
ASTM D8366-21a
Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
10/1/2021 - PDF - English -
Learn More€51.00 -
ASTM D8366-21a + Redline
Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
10/1/2021 - PDF - English -
Learn More€61.00 -
BS EN ISO 13000-2:2021 + Redline
Tracked Changes. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination properties
9/28/2021 - PDF - English -
Learn More€235.00 -
BS EN ISO 13000-1:2021 + Redline
Tracked Changes. Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Requirements and designation
9/27/2021 - PDF - English -
Learn More€235.00 -
BS EN ISO 13000-2:2021
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Preparation of test specimens and determination properties
9/9/2021 - PDF - English -
Learn More€180.00 -
BS EN ISO 13000-1:2021
Plastics. Polytetrafluoroethylene (PTFE) semi-finished products Requirements and designation
9/7/2021 - PDF - English -
Learn More€180.00 -
NBN EN ISO 13000-2:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
9/3/2021 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13000-1:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
9/3/2021 - PDF - German -
Learn More€58.00 -
NBN EN ISO 13000-2:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
9/3/2021 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13000-2:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties (ISO 13000-2:2021)
9/3/2021 - PDF - French -
Learn More€58.00 -
NBN EN ISO 13000-1:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
9/3/2021 - PDF - English -
Learn More€58.00 -
NBN EN ISO 13000-1:2021
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1: Requirements and designation (ISO 13000-1:2021)
9/3/2021 - PDF - French -
Learn More€58.00 -
NF EN ISO 13000-2, T51-550-2 (09/2021)
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 2 : Preparation of test specimens and determination of properties
9/1/2021 - Paper - French -
Learn More€60.67 -
NF EN ISO 13000-1, T51-550-1 (09/2021)
Plastics - Polytetrafluoroethylene (PTFE) semi-finished products - Part 1 : Requirements and designation
9/1/2021 - Paper - French -
Learn More€60.67 -
DIN ISO 20457:2021-06
Plastics moulded parts - Tolerances and acceptance conditions (ISO 20457:2018), Text in German and English
6/1/2021 - PDF - English, German -
Learn More€115.33 -
ASTM D8301-21
Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
6/1/2021 - PDF - English -
Learn More€51.00 -
ASTM D8301-21 + Redline
Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
6/1/2021 - PDF - English -
Learn More€61.00 -
DIN 53733:2021-04
Testing of plastics - Size reduction of plastic products for test purposes
4/1/2021 - PDF - German -
Learn More€45.98 -
ASTM D5207-20 + Redline
Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
12/1/2020 - PDF - English -
Learn More€53.00 -
ASTM D5207-20
Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
12/1/2020 - PDF - English -
Learn More€46.00 -
ASTM D8363-20 + Redline
Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
11/1/2020 - PDF - English -
Learn More€53.00 -
ASTM D8363-20
Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
11/1/2020 - PDF - English -
Learn More€46.00 -
ASTM F1927-20
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
6/1/2020 - PDF - English -
Learn More€51.00 -
ASTM F1927-20 + Redline
Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
6/1/2020 - PDF - English -
Learn More€61.00 -
BS EN ISO 11469:2016 + Redline
Tracked Changes. Plastics. Generic identification and marking of plastics products
2/24/2020 - PDF - English -
Learn More€197.00 -
ASTM D6778-20
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
2/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D6778-20 + Redline
Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
2/1/2020 - PDF - English -
Learn More€61.00 -
ASTM D3826-18 + Redline
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
11/1/2018 - PDF - English -
Learn More€53.00 -
ASTM D3826-18
Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
11/1/2018 - PDF - English -
Learn More€46.00 -
€293.00
-
€174.00
-
DIN ISO 3302-1:2018-06
Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014)
6/1/2018 - PDF - German -
Learn More€72.80 -
ASTM D6110-18
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
4/1/2018 - PDF - English -
Learn More€57.00 -
ASTM D6110-18 + Redline
Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
4/1/2018 - PDF - English -
Learn More€68.00 -
ASTM F2136-18(2024)
Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
2/15/2018 - PDF - English -
Learn More€60.00 -
ASTM F2136-18(2024) + Redline
Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
2/15/2018 - PDF - English -
Learn More€72.00 -
DIN ISO 15082:2018-02
Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
2/1/2018 - PDF - German -
Learn More€126.26 -
DIN ISO 15082:2018-02
Road vehicles - Tests for rigid plastic safety glazing materials (ISO 15082:2016)
2/1/2018 - PDF - English -
Learn More€157.66 -
NF T54-405 (06/2017)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for outside uses - Specifications and test methods
6/1/2017 - Paper - French -
Learn More€86.67 -
DIN EN ISO 11469:2017-01
Plastics - Generic identification and marking of plastics products (ISO 11469:2016), German version EN ISO 11469:2016
1/1/2017 - PDF - German -
Learn More€52.90 -
DIN EN ISO 11469:2017-01
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
1/1/2017 - PDF - English -
Learn More€66.07 -
€52.00
-
BS ISO 15082:2016
Road vehicles. Tests for rigid plastic safety glazing materials
11/30/2016 - PDF - English -
Learn More€348.00 -
NBN EN ISO 11469:2016
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
11/23/2016 - PDF - English -
Learn More€37.00 -
NBN EN ISO 11469:2016
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
11/23/2016 - PDF - French -
Learn More€37.00 -
NBN EN ISO 11469:2016
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
11/23/2016 - PDF - German -
Learn More€37.00 -
BS EN ISO 11469:2016
Plastics. Generic identification and marking of plastics products
10/31/2016 - PDF - English -
Learn More€151.00 -
ASTM D6098-16 + Redline
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
9/1/2016 - PDF - English -
Learn More€61.00 -
ASTM D6098-16
Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
9/1/2016 - PDF - English -
Learn More€51.00 -
DVS 2206:2016-08
Non-destructive tests on tanks, apparatus and piping made of thermoplastics - Dimensional checking and visual inspection
8/1/2016 - - -
Learn MoreFrom: €21.85 -
DVS 2206-2:2015-09
Non-destructive testing on pressureless tanks and apparatus made of thermoplastic - Leak test
9/1/2015 - - -
Learn MoreFrom: €12.96 -
ASTM E2954-15(2022)
Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
5/1/2015 - PDF - English -
Learn More€51.00 -
ASTM D8015-15(2019) + Redline
Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
1/1/2015 - PDF - English -
Learn More€53.00 -
ASTM E2954-15(2022) + Redline
Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
1/1/2015 - PDF - English -
Learn More€61.00 -
ASTM D8015-15(2019)
Standard Test Method for Dimensional Changes of Elastomer and Rubber Materials Due to Exposure to Gaseous Hydrocarbon Environments
1/1/2015 - PDF - English -
Learn More€46.00 -
14/30243471 DC:2014
BS ISO 15082. Road vehicles. Tests for rigid plastic safety glazing materials
10/28/2014 - PDF - English -
Learn More€24.00 -
NF ISO 3302-1, T47-001-1 (09/2014)
Rubber - Tolerances for products - Part 1 : dimensional tolerances - Caoutchouc
9/1/2014 - Paper - French -
Learn More€60.67 -
€180.00
-
€72.00
-
€72.00
-
DIN EN ISO 15791-1:2014-05
Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014), German version EN ISO 15791-1:2013
5/1/2014 - PDF - German -
Learn More€85.79 -
DIN EN ISO 15791-1:2014-05
Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
5/1/2014 - PDF - English -
Learn More€107.48 -
NF EN 12814-3, A89-810-3 (04/2014)
Testing of welded joints in thermoplastics semi-finished products - Part 3 : tensile creep test
4/1/2014 - Paper - French -
Learn More€83.85 -
ASTM D3716-14(2020)
Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
1/1/2014 - PDF - English -
Learn More€51.00 -
ASTM D3716-14(2020) + Redline
Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
1/1/2014 - PDF - English -
Learn More€61.00 -
€51.00
-
€61.00
-
BS ISO 6072:2011
Rubber. Compatibility between hydraulic fluids and standard elastomeric materials
1/31/2012 - PDF - English -
Learn More€250.00 -
DVS 2206-4:2011-09
Non-destructive tests on tanks, apparatus and piping made of thermoplastics - Testing with electrical high voltage
9/1/2011 - - -
Learn More€12.96 -
DVS 2206-1:2011-09
Non-destructive tests on tanks, apparatus and piping made of thermoplastics - Dimensional checking and visual inspection
9/1/2011 - - -
Learn MoreFrom: €21.85 -
BS 3379:2005+A1:2011
Combustion modified flexible polyurethane cellular materials for loadbearing applications. Specification
7/31/2011 - PDF - English -
Learn More€180.00 -
ASTM D6456-10(2018)
Standard Specification for Finished Parts Made from Polyimide Resin
8/1/2010 - PDF - English -
Learn More€46.00 -
JIS A 5558:2010 (R2015)
Unplasticized polyvinyl chloride (PVC-U) profiles for fabrication of windows and doors
4/20/2010 - PDF - Japanese -
Learn More€25.00 -
ASTM D6456-10(2018) + Redline
Standard Specification for Finished Parts Made from Polyimide Resin
1/1/2010 - PDF - English -
Learn More€53.00 -
PD ISO/TR 24699:2009
Rubber and rubber products. Environmental aspects. General guidelines for their inclusion in standards
11/30/2009 - PDF - English -
Learn More€180.00 -
€72.00
-
€25.00
-
JIS Z 7121:2007 (R2016)
Methods of life cycle inventory studies on plastics including recycling stages
2/20/2007 - PDF - Japanese -
Learn More€62.66 -
JIS B 8671:2006 (R2016)
Hydraulic fluid power - Compatibility between fluids and standard elastomeric materials
10/20/2006 - PDF - Japanese -
Learn More€25.00 -
UNE 53952:2006 IN (R2016)
Plastics. Flexible foams of polyurethane (PUR). Hardness variation by humidity and temperature conditions.
1/4/2006 - PDF - Spanish -
Learn More€60.00 -
DIN EN 13100-3:2005-02
Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing; German version EN 13100-3:2004
2/1/2005 - PDF - German -
Learn More€72.80 -
DIN EN 13100-3:2005-02
Non-destructive testing of welded joints in thermoplastics semi-finished products - Part 3: Ultrasonic testing; German version EN 13100-3:2004
2/1/2005 - PDF - English -
Learn More€91.12 -
JIS K 6999:2004 (R2013)
Plastics - Generic identification and marking of plastics products
3/20/2004 - PDF - Japanese -
Learn More€25.00 -
ASTM D6105-04(2019) + Redline
Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
1/1/2004 - PDF - English -
Learn More€61.00 -
ASTM D6105-04(2019)
Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
1/1/2004 - PDF - English -
Learn More€51.00 -
JIS Z 7120:2003 (R2017)
Plastics - Guideline for the application of Mobius loop to plastic products
5/20/2003 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
JIS Z 3831:2002 (R2016)
Standard qualification procedure for welding technique of plastics
7/20/2002 - PDF - Japanese -
Learn More€25.00 -
BS EN 1778:2000
Characteristic values for welded thermoplastics constructions. Determination of allowable stresses and moduli for design of thermoplastics equipment
3/15/2000 - PDF - English -
Learn More€348.00 -
NBN EN 1778:2000
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
12/15/1999 - PDF - English -
Learn More€163.00 -
BS EN ISO 4614:2000
Plastics. Melamine-formaldehyde mouldings. Determination of extractable formaldehyde
12/15/1999 - PDF - English -
Learn More€151.00 -
NBN EN 1778:2000
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
12/15/1999 - PDF - French -
Learn More€163.00 -
NBN EN 1778:2000
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
12/15/1999 - PDF - German -
Learn More€163.00 -
DIN EN 1778:1999-12
Characteristic values for welded thermoplastic constructions - Determination of allowable stresses and moduli for design of thermoplastic equipment, German version EN 1778:1999
12/1/1999 - PDF - German -
Learn More€126.26 -
DIN EN 1778:1999-12
Characteristic values for welded thermoplastics constructions - Determination of allowable stresses and moduli for design of thermoplastics equipment
12/1/1999 - PDF - English -
Learn More€157.66 -
BS 3379:1975
Specification for flexible urethane foam for loadbearing applications
2/17/1999 - PDF - English -
Learn More€180.00 -
BS 6206:1981
Specification for impact performance requirements for flat safety glass and safety plastics for use in buildings
7/1/1998 - PDF - English -
Learn More€250.00 -
ASTM G137-97(2017) + Redline
Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
1/1/1997 - PDF - English -
Learn More€65.00 -
ASTM G137-97(2017)
Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration
1/1/1997 - PDF - English -
Learn More€54.00 -
NF F00-456 (08/1991) (R2011)
Railway equipment in general. Parts made of rubber cellular flexible material. - Matériel ferroviaire en général
8/1/1991 - Paper - French -
Learn More€60.67 -
NF F00-072 (06/1990) (R2010)
General railway equipment. Compact-rubber extruded parts. - Matériel ferroviaire en général
6/1/1990 - Paper - French -
Learn More€60.67 -
NF F00-071 (06/1990) (R2010)
General railway equipment. Compact-rubber cast parts. - Matériel ferroviaire en général
6/1/1990 - Paper - French -
Learn More€75.67 -
JASO M322:1986
Heat aging and low temperature tests for automotive rubber parts
3/28/1986 - PDF - Japanese -
Learn More€52.00 -
NF R80-001 (12/1980)
Plastics. Division into rigid products and flexible products.
12/1/1980 - Paper - French -
Learn More€25.67 -
BS EN ISO 172:1998
Plastics. Phenol-formaldehyde mouldings. Detection of free ammonia
4/30/1980 - PDF - English -
Learn More€151.00 -
BS EN ISO 119:1998
Plastics. Phenol-formaldehyde mouldings. Determination of free phenols. Iodometric method
3/31/1978 - PDF - English -
Learn More€151.00 -
€75.60
-
€38.40