83.080.10 : Thermosetting materials
-
ASTM D7487-24
Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
2/1/2024 - PDF - English -
Learn More€60.00 -
ASTM D7487-24 + Redline
Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
2/1/2024 - PDF - English -
Learn More€71.00 -
24/30456457 DC:2023
BS ISO 4764 Plastics-Polyols for Use in the production of polyurethanes — Determination of degree of unsaturation by using Iodine method
12/26/2023 - PDF - English -
Learn More€24.00 -
BS ISO 14900:2023 + Redline
Tracked Changes. Plastics. Polyols for use in the production of polyurethanes. Determination of hydroxyl number
12/22/2023 - PDF - English -
Learn More€234.00 -
BS ISO 14900:2023
Plastics. Polyols for use in the production of polyurethanes. Determination of hydroxyl number
12/21/2023 - PDF - English -
Learn More€180.00 -
DIN EN ISO 60:2023-12
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023), German version EN ISO 60:2023
12/1/2023 - PDF - German -
Learn More€59.63 -
DIN EN ISO 3671:2023-12
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023), German version EN ISO 3671:2023
12/1/2023 - PDF - German -
Learn More€39.35 -
BS EN ISO 3671:2023 + Redline
Tracked Changes. Plastics. Aminoplastic moulding materials. Determination of volatile matter
10/30/2023 - PDF - English -
Learn More€197.00 -
BS EN ISO 60:2023 + Redline
Tracked Changes. Plastics. Determination of apparent density of material that can be poured from a specified funnel
10/20/2023 - PDF - English -
Learn More€197.00 -
BS EN ISO 60:2023
Plastics. Determination of apparent density of material that can be poured from a specified funnel
10/5/2023 - PDF - English -
Learn More€151.00 -
BS EN ISO 3671:2023
Plastics. Aminoplastic moulding materials. Determination of volatile matter
10/5/2023 - PDF - English -
Learn More€151.00 -
NBN EN ISO 60:2023
Plastiques - Détermination de la masse volumique apparente des matières susceptibles de s'écouler à travers un entonnoir donné (ISO 60:2023)
10/4/2023 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3671:2023
Plastics - Aminoplastic moulding materials - Determination of volatile matter (ISO 3671:2023)
10/4/2023 - PDF - English -
Learn More€37.00 -
NBN EN ISO 3671:2023
Kunststoffe - Aminoplast-Formmassen - Bestimmung der flüchtigen Anteile (ISO 3671:2023)
10/4/2023 - PDF - German -
Learn More€37.00 -
NBN EN ISO 60:2023
Kunststoffe - Bestimmung der scheinbaren Dichte von Formmassen, die durch einen gegebenen Trichter abfließen können (Schüttdichte) (ISO 60:2023)
10/4/2023 - PDF - German -
Learn More€37.00 -
NBN EN ISO 60:2023
Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023)
10/4/2023 - PDF - English -
Learn More€37.00 -
NBN EN ISO 3671:2023
Plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles (ISO 3671:2023)
10/4/2023 - PDF - French -
Learn More€37.00 -
NF EN ISO 3671, T53-501 (10/2023)
Plastiques - Matières à mouler aminoplastes - Détermination des matières volatiles
10/1/2023 - Paper - French -
Learn More€25.67 -
BS ISO 14897:2023 + Redline
Tracked Changes. Plastics. Polyols for use in the production of polyurethanes. Determination of water content
9/26/2023 - PDF - English -
Learn More€235.00 -
BS ISO 14897:2023
Plastics. Polyols for use in the production of polyurethanes. Determination of water content
8/4/2023 - PDF - English -
Learn More€180.00 -
BS ISO 17710:2023 + Redline
Tracked Changes. Plastics. Polyols for use in the production of polyurethanes. Determination of degree of unsaturation by microtitration
7/19/2023 - PDF - English -
Learn More€235.00 -
BS ISO 17710:2023
Plastics. Polyols for use in the production of polyurethanes. Determination of degree of unsaturation by microtitration
7/14/2023 - PDF - English -
Learn More€180.00 -
23/30464067 DC:2023
BS EN ISO 14900. Plastics. Polyols for use in the production of polyurethane. Determination of hydroxyl number
5/16/2023 - PDF - English -
Learn More€24.00 -
ASTM D7750-23
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
4/1/2023 - PDF - English -
Learn More€54.00 -
ASTM D7750-23 + Redline
Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
4/1/2023 - PDF - English -
Learn More€65.00 -
ASTM D4661-23 + Redline
Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
3/1/2023 - PDF - English -
Learn More€65.00 -
ASTM D5629-23 + Redline
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
3/1/2023 - PDF - English -
Learn More€57.00 -
ASTM D4661-23
Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
3/1/2023 - PDF - English -
Learn More€54.00 -
ASTM D5629-23
Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
3/1/2023 - PDF - English -
Learn More€48.00 -
ASTM D5991-23
Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
2/1/2023 - PDF - English -
Learn More€48.00 -
ASTM D5991-23 + Redline
Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
2/1/2023 - PDF - English -
Learn More€57.00 -
NBN ISO 14899:2023
Plastics — Polyols for use in the production of polyurethanes — Determination of basicity ISO 14899:2022
1/24/2023 - PDF - English -
Learn More€37.00 -
23/30464063 DC:2023
BS ENISO 3671 Plastics. Aminoplastic moulding materials. Determination of volatile matter
1/4/2023 - PDF - English -
Learn More€24.00 -
22/30464317 DC:2022
BS EN ISO 61. Plastics. Determination of apparent density of moulding material that cannot be poured from a specified funnel
12/21/2022 - PDF - English -
Learn More€24.00 -
22/30464215 DC:2022
BS EN ISO 60. Plastics. Determination of apparent density of material that can be poured from a specified funnel
12/12/2022 - PDF - English -
Learn More€24.00 -
UNE-EN ISO 3146:2022
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
11/30/2022 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 3146:2022
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods (ISO 3146:2022)
11/30/2022 - PDF - Spanish -
Learn More€63.00 -
€68.00
-
€81.60
-
BS ISO 14899:2022 + Redline
Tracked Changes. Plastics. Polyols for use in the production of polyurethane. Determination of basicity
8/9/2022 - PDF - English -
Learn More€197.00 -
BS ISO 14899:2022
Plastics. Polyols for use in the production of polyurethane. Determination of basicity
7/29/2022 - PDF - English -
Learn More€151.00 -
ASTM D6342-22
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
7/1/2022 - PDF - English -
Learn More€51.00 -
ASTM D6342-22 + Redline
Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
7/1/2022 - PDF - English -
Learn More€61.00 -
ASTM D731-22 + Redline
Standard Test Method for Molding Index of Thermosetting Molding Powder
3/15/2022 - PDF - English -
Learn More€53.00 -
ASTM D731-22
Standard Test Method for Molding Index of Thermosetting Molding Powder
3/15/2022 - PDF - English -
Learn More€46.00 -
VDA 281-100:2021-12
Test methods for the characterization of material properties of thermoplastics and thermosetting plastics in continuous contact with urea solution AdBlue
12/1/2021 - - -
Learn More€200.00 -
NBN ISO 14900:2021
Plastics — Polyols for use in the production of polyurethane — Determination of hydroxyl number ISO 14900:2017
5/28/2021 - PDF - English -
Learn More€58.00 -
NBN ISO 21257:2021
Plastics — Polymer polyols for use in the production of polyurethane — Determination of the residual acrylonitrile and styrene monomer content by gas chromatography ISO 21257:2018
5/28/2021 - PDF - English -
Learn More€89.00 -
NBN ISO 15064:2021
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of the isomer ratio in toluenediisocyanate (TDI) ISO 15064:2017
5/28/2021 - PDF - English -
Learn More€58.00 -
NBN ISO 14322:2021
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) ISO 14322:2018
5/28/2021 - PDF - English -
Learn More€58.00 -
NBN ISO 26603:2021
Plastics — Aromatic isocyanates for use in the production of polyurethanes — Determination of total chlorine ISO 26603:2017
5/28/2021 - PDF - English -
Learn More€58.00 -
NBN ISO 20368:2021
Plastics — Epoxy resins — Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy ISO 20368:2017
5/28/2021 - PDF - English -
Learn More€58.00 -
ASTM F2565-21 + Redline
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
5/15/2021 - PDF - English -
Learn More€53.00 -
ASTM F2565-21
Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
5/15/2021 - PDF - English -
Learn More€46.00 -
BS ISO 4216:2021
Thermosetting resin and UV curable resin. Determination of shrinkage by continuous measurement method
5/10/2021 - PDF - English -
Learn More€250.00 -
€61.00
-
€51.00
-
ASTM D7997-21
Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
1/15/2021 - PDF - English -
Learn More€51.00 -
ASTM D7997-21 + Redline
Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations
1/15/2021 - PDF - English -
Learn More€61.00 -
ASTM D2396-20 + Redline
Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
12/1/2020 - PDF - English -
Learn More€61.00 -
ASTM D2396-20
Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
12/1/2020 - PDF - English -
Learn More€51.00 -
ASTM F2873-20
Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
5/1/2020 - PDF - English -
Learn More€51.00 -
ASTM F2873-20 + Redline
Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
5/1/2020 - PDF - English -
Learn More€61.00 -
ASTM D4663-20
Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
4/1/2020 - PDF - English -
Learn More€46.00 -
ASTM D4663-20 + Redline
Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
4/1/2020 - PDF - English -
Learn More€53.00 -
BS ISO 14322:2018 + Redline
Tracked Changes. Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
2/27/2020 - PDF - English -
Learn More€235.00 -
BS EN ISO 2555:2018 + Redline
Tracked Changes. Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method
2/26/2020 - PDF - English -
Learn More€326.00 -
BS EN ISO 1110:2019 + Redline
Tracked Changes. Plastics. Polyamides. Accelerated conditioning of test specimens
2/24/2020 - PDF - English -
Learn More€197.00 -
ASTM D1603-20
Standard Test Method for Carbon Black Content in Olefin Plastics
2/1/2020 - PDF - English -
Learn More€46.00 -
ASTM D1603-20 + Redline
Standard Test Method for Carbon Black Content in Olefin Plastics
2/1/2020 - PDF - English -
Learn More€53.00 -
BS EN ISO 1110:2019
Plastics. Polyamides. Accelerated conditioning of test specimens
6/19/2019 - PDF - English -
Learn More€151.00 -
ASTM D3596-19 + Redline
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
4/1/2019 - PDF - English -
Learn More€53.00 -
ASTM D2222-19 + Redline
Standard Test Method for Methanol Extract of Vinyl Chloride Resins
4/1/2019 - PDF - English -
Learn More€53.00 -
ASTM D3596-19
Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
4/1/2019 - PDF - English -
Learn More€46.00 -
ASTM D2222-19
Standard Test Method for Methanol Extract of Vinyl Chloride Resins
4/1/2019 - PDF - English -
Learn More€46.00 -
ASTM F2313-18
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 ,% Glycolide
12/15/2018 - PDF - English -
Learn More€51.00 -
ASTM F2313-18 + Redline
Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 ,% Glycolide
12/15/2018 - PDF - English -
Learn More€61.00 -
ASTM D4895-18(2023)
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
11/1/2018 - PDF - English -
Learn More€60.00 -
ASTM D4895-18(2023) + Redline
Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
11/1/2018 - PDF - English -
Learn More€72.00 -
BS ISO 21257:2018
Plastics. Polymer polyols for use in the production of polyurethane. Determination of the residual acrylonitrile and styrene monomer content by gas chromatography
10/11/2018 - PDF - English -
Learn More€250.00 -
ISO 21257:2018
Plastics
Polymer polyols for use in the production of polyurethane
10/3/2018 - Paper - English -
Learn More€110.00 -
NF EN ISO 12215-1, J95-046-1 (10/2018)
Small craft - Hull construction and scantlings - Part 1 : materials : Thermosetting resins, glass-fibre reinforcement, reference laminate
10/1/2018 - Paper - French -
Learn More€46.55 -
ASTM D2584-18
Standard Test Method for Ignition Loss of Cured Reinforced Resins
9/15/2018 - PDF - English -
Learn More€46.00 -
ASTM D2584-18 + Redline
Standard Test Method for Ignition Loss of Cured Reinforced Resins
9/15/2018 - PDF - English -
Learn More€53.00 -
BS ISO 14322:2018
Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC)
7/20/2018 - PDF - English -
Learn More€180.00 -
€72.00
-
BS EN ISO 2555:2018
Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity using a single cylinder type rotational viscometer method
6/19/2018 - PDF - English -
Learn More€250.00 -
BS ISO 20368:2017
Plastics. Epoxy resins. Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy
1/24/2018 - PDF - English -
Learn More€180.00 -
€72.00
-
BS ISO 15064:2017
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of the isomer ratio in toluenediisocyanate (TDI)
7/28/2017 - PDF - English -
Learn More€180.00 -
ASTM D5028-17 + Redline
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
7/15/2017 - PDF - English -
Learn More€53.00 -
ASTM D5028-17
Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
7/15/2017 - PDF - English -
Learn More€46.00 -
ISO 15064:2017 (R2022)
Plastics
Aromatic isocyanates for use in the production of polyurethanes
6/30/2017 - Paper - English -
Learn More€72.00 -
BS ISO 26603:2017
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of total chlorine
3/31/2017 - PDF - English -
Learn More€180.00 -
ISO 26603:2017 (R2022)
Plastics
Aromatic isocyanates for use in the production of polyurethanes
3/2/2017 - Paper - English -
Learn More€72.00 -
UNE-EN ISO 11469:2017
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
2/1/2017 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 11469:2017
Plastics - Generic identification and marking of plastics products (ISO 11469:2016)
2/1/2017 - PDF - English -
Learn More€62.40 -
ASTM D8065/D8065M-16(2023)
Standard Classification System and Basis for Specification for Specifying Plastic Films
9/1/2016 - PDF - English -
Learn More€60.00 -
ASTM D8065/D8065M-16(2023) + Redline
Standard Classification System and Basis for Specification for Specifying Plastic Films
9/1/2016 - PDF - English -
Learn More€72.00 -
JIS K 7148-1:2015
Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
11/20/2015 - PDF - Japanese -
Learn More€25.00 -
ASTM D3643-15(2022)
Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
11/1/2015 - PDF - English -
Learn More€48.00 -
ASTM D3643-15(2022) + Redline
Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
11/1/2015 - PDF - English -
Learn More€57.00 -
ASTM D3644-15(2022)
Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
10/1/2015 - PDF - English -
Learn More€48.00 -
ASTM D3644-15(2022) + Redline
Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
10/1/2015 - PDF - English -
Learn More€57.00 -
NF EN ISO 1628-5, T51-061-5 (05/2015)
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5 : thermoplastic polyester (TP) homopolymers and copolymers
5/1/2015 - Paper - French -
Learn More€75.50 -
JIS A 6024:2015
Epoxy adhesives for repairing and reinforcement in buildings
1/20/2015 - PDF - Japanese -
Learn More€46.02 -
ASTM D4549-15(2021)
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
1/1/2015 - PDF - English -
Learn More€51.00 -
ASTM D4549-15(2021) + Redline
Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
1/1/2015 - PDF - English -
Learn More€61.00 -
UNE-ISO 4901:2014 (R2021)
Reinforced plastics based on unsaturated-polyester resins. Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography
12/17/2014 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 4895:2014
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
11/5/2014 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 4895:2014
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
11/5/2014 - PDF - English -
Learn More€58.80 -
DIN EN ISO 4895:2014-11
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014), German version EN ISO 4895:2014
11/1/2014 - PDF - German -
Learn More€45.98 -
DIN EN ISO 4895:2014-11
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
11/1/2014 - PDF - English -
Learn More€57.57 -
NBN EN ISO 4895:2014
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
8/22/2014 - PDF - English -
Learn More€37.00 -
NBN EN ISO 4895:2014
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
8/22/2014 - PDF - French -
Learn More€37.00 -
NBN EN ISO 4895:2014
Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014)
8/22/2014 - PDF - German -
Learn More€37.00 -
BS EN ISO 4895:2014
Plastics. Liquid epoxy resins. Determination of tendency to crystallize
7/31/2014 - PDF - English -
Learn More€151.00 -
€48.00
-
€48.00
-
BS ISO 25761:2014
Plastics. Polyols for use in the production of polyurethanes. Determination of basicity (total amine value), expressed as percent nitrogen
5/31/2014 - PDF - English -
Learn More€180.00 -
NF F01-281 (04/2014)
Railway rolling stock - Parts in fibre-reinforced thermosetting composites - Specifications, test methods, manufacturing, qualification and assessment of conformity
4/1/2014 - Paper - French -
Learn More€86.67 -
€180.00
-
BS ISO 15028:2014
Plastics. Aromatic isocyanates for use in the production of polyurethanes. Determination of hydrolysable chlorine
3/31/2014 - PDF - English -
Learn More€180.00 -
€72.00
-
ISO 15028:2014 (R2019)
Plastics
Aromatic isocyanates for use in the production of polyurethanes
2/11/2014 - Paper - English -
Learn More€48.00 -
€48.00
-
UNE-EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
12/23/2013 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
12/23/2013 - PDF - English -
Learn More€72.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - English -
Learn More€58.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - French -
Learn More€58.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - German -
Learn More€58.00 -
BS EN ISO 75-2:2013
Plastics. Determination of temperature deflection under load Plastics and ebonite
4/30/2013 - PDF - English -
Learn More€180.00 -
ISO 75-2:2013 (R2018)
Plastics
Determination of temperature of deflection under load
4/9/2013 - Paper - English -
Learn More€72.00 -
ISO 75-2:2013 (R2018)
Plastics
Determination of temperature of deflection under load
4/9/2013 - Paper - French -
Learn More€72.00 -
UNE-EN ISO 3673-2:2013
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
1/23/2013 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 3673-2:2013
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
1/23/2013 - PDF - English -
Learn More€63.60 -
ASTM D3642-13(2021)
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM D6289-13(2019)
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM D3642-13(2021) + Redline
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM D6289-13(2019) + Redline
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
1/1/2013 - PDF - English -
Learn More€53.00 -
JIS K 6807:2012 (R2017)
General testing methods of formaldehyde resin adhesives for wood
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
DIN EN ISO 3673-2:2012-10
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012), German version EN ISO 3673-2:2012
10/1/2012 - PDF - German -
Learn More€59.63 -
DIN EN ISO 3673-2:2012-10
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
10/1/2012 - PDF - English -
Learn More€74.58 -
NBN EN ISO 3673-2:2012
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
9/28/2012 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3673-2:2012
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
9/28/2012 - PDF - German -
Learn More€37.00 -
NBN EN ISO 3673-2:2012
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
9/28/2012 - PDF - English -
Learn More€37.00 -
BS EN ISO 3673-2:2012
Plastics. Epoxy resins Preparation of test specimens and determination properties crosslinked epoxy
8/31/2012 - PDF - English -
Learn More€180.00 -
€48.00
-
€48.00
-
ASTM D5165-12(2020) + Redline
Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
1/1/2012 - PDF - English -
Learn More€53.00 -
ASTM D5165-12(2020)
Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle
1/1/2012 - PDF - English -
Learn More€46.00 -
BS ISO 15063:2011
Plastics. Polyols for use in the production of polyurethanes. Determination of hydroxyl number by NIR spectroscopy
11/30/2011 - PDF - English -
Learn More€293.00 -
ISO 14898:1999/Amd 1:2011
Plastics
Aromatic isocyanates for use in the production of polyurethane
10/24/2011 - Paper - English -
Learn More€21.00 -
€174.00
-
NF T51-506 (05/2011)
Plastics - Thermosetting resins - Analysis by liquid chromatography (HPLC) - Plastiques
5/1/2011 - Paper - French -
Learn More€75.67 -
NF T51-505 (05/2011)
Plastics - Thermosetting resins - Analysis by steric exclusion chromatography (S.E.C.) - Plastiques
5/1/2011 - Paper - French -
Learn More€48.00 -
UNE-EN ISO 175:2011
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
3/30/2011 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 175:2011
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
3/30/2011 - PDF - Spanish -
Learn More€70.00 -
JIS K 1557-7:2011 (R2015)
Plastics - Polyols for use in the production of polyurethanes - Part 7: Determination of basicity, expressed as percent nitrogen and total amine value
3/22/2011 - PDF - Japanese -
Learn More€25.00 -
€46.00
-
ASTM D1726-11(2019) + Redline
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
1/1/2011 - PDF - English -
Learn More€53.00 -
€53.00
-
ASTM D1726-11(2019)
Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins
1/1/2011 - PDF - English -
Learn More€46.00 -
€180.00
-
€72.00
-
UNE-EN ISO 21627-2:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
5/12/2010 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 21627-1:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
5/12/2010 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 21627-3:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
5/12/2010 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 21627-2:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
5/12/2010 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 21627-1:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
5/12/2010 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 21627-3:2010
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
5/12/2010 - PDF - Spanish -
Learn More€57.00 -
€151.00
-
JIS K 1603-4:2010 (R2014)
Plastics - Aromatic isocyanates for use in the production of polyurethanes - Part 4: Determination of the isomer ratio
2/22/2010 - PDF - Japanese -
Learn More€25.00 -
JIS K 1603-5:2010 (R2014)
Plastics - Aromatic isocyanates for use in the production of polyurethanes - Part 5: Determination of total chlorine
2/22/2010 - PDF - Japanese -
Learn More€25.00 -
DIN EN ISO 21627-1:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009), German version EN ISO 21627-1:2009
1/1/2010 - PDF - German -
Learn More€52.90 -
DIN EN ISO 21627-3:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
1/1/2010 - PDF - English -
Learn More€66.07 -
DIN EN ISO 21627-2:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
1/1/2010 - PDF - English -
Learn More€66.07 -
DIN EN ISO 21627-1:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
1/1/2010 - PDF - English -
Learn More€66.07 -
DIN EN ISO 21627-3:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009), German version EN ISO 21627-3:2009
1/1/2010 - PDF - German -
Learn More€52.90 -
DIN EN ISO 21627-2:2010-01
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009), German version EN ISO 21627-2:2009
1/1/2010 - PDF - German -
Learn More€52.90 -
UNE-EN ISO 14896:2009
Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
11/25/2009 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 14896:2009
Plastics - Polyurethane raw materials - Determination of isocyanate content (ISO 14896:2009)
11/25/2009 - PDF - English -
Learn More€72.00 -
NBN EN ISO 21627-1:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
11/20/2009 - PDF - English -
Learn More€37.00 -
NBN EN ISO 21627-3:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
11/20/2009 - PDF - German -
Learn More€37.00 -
NBN EN ISO 21627-1:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
11/20/2009 - PDF - French -
Learn More€37.00 -
NBN EN ISO 21627-2:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
11/20/2009 - PDF - English -
Learn More€37.00 -
NBN EN ISO 21627-2:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
11/20/2009 - PDF - French -
Learn More€37.00 -
NBN EN ISO 21627-3:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
11/20/2009 - PDF - English -
Learn More€37.00 -
NBN EN ISO 21627-1:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine (ISO 21627-1:2009)
11/20/2009 - PDF - German -
Learn More€37.00 -
NBN EN ISO 21627-3:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total chlorine (ISO 21627-3:2009)
11/20/2009 - PDF - French -
Learn More€37.00 -
NBN EN ISO 21627-2:2009
Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine (ISO 21627-2:2009)
11/20/2009 - PDF - German -
Learn More€37.00 -
UNE-EN 1119:2009
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
11/11/2009 - PDF - English -
Learn More€63.60 -
UNE-EN 1119:2009
Plastics piping systems - Joints for glass-reinforced thermosetting plastics (GRP) pipes and fittings - Test methods for leaktightness and resistance to damage of non-thrust resistant flexible joints with elastomeric sealing elements
11/11/2009 - PDF - Spanish -
Learn More€53.00 -
NF EN ISO 21627-3, T51-914-3 (11/2009)
Plastics - Epoxy resins - Determination of chlorine content - Part 3 : total chlorine - Plastiques
11/1/2009 - Paper - French -
Learn More€46.55 -
BS EN ISO 21627-3:2009
Plastics. Epoxy resins. Determination of chlorine content Total
10/31/2009 - PDF - English -
Learn More€180.00 -
BS EN ISO 21627-1:2009
Plastics. Epoxy resins. Determination of chlorine content Inorganic
10/31/2009 - PDF - English -
Learn More€151.00 -
BS EN ISO 21627-2:2009
Plastics. Epoxy resins. Determination of chlorine content Easily saponifiable
10/31/2009 - PDF - English -
Learn More€180.00 -
BS EN ISO 14896:2009
Plastics. Polyurethane raw materials. Determination of isocyanate content
9/30/2009 - PDF - English -
Learn More€180.00 -
€48.00
-
€48.00