83 : Rubber and plastic industries
-
€110.00 -
€110.00
-
ASTM D4364-13(2022)e1
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
7/15/2013 - PDF - English -
Learn More€51.00 -
€79.00 -
€0.00 -
€0.00
-
DIN EN 16245-4:2013-07
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics, German version EN 16245-4:2013
7/1/2013 - PDF - German -
Learn More€59.63 -
DIN EN 16245-1:2013-07
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements, German version EN 16245-1:2013
7/1/2013 - PDF - German -
Learn More€52.90 -
NF EN 16245-5, T57-120-5 (07/2013)
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 5 : specific requirements for core materials - Composites plastiques renforcés de fibres
7/1/2013 - Paper - English -
Learn More€51.24 -
ASTM D4066-13(2019)
Standard Classification System for Nylon Injection and Extrusion Materials (PA)
7/1/2013 - PDF - English -
Learn More€57.00 -
DIN EN 16245-4:2013-07
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
7/1/2013 - PDF - English -
Learn More€74.58 -
DIN EN 16245-1:2013-07
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
7/1/2013 - PDF - English -
Learn More€66.07 -
BS EN 16245-2:2013
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for resin, curing systems, additives and modifiers
6/30/2013 - PDF - English -
Learn More€250.00 -
BS EN 16245-5:2013
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for core materials
6/30/2013 - PDF - English -
Learn More€180.00 -
BS EN ISO 19712-1:2013
Plastics. Decorative solid surfacing materials Classification and specifications
6/30/2013 - PDF - English -
Learn More€180.00 -
PD CEN/TS 14999:2013
Adhesives for thermoplastic piping systems. Accelerated ageing test in storage container
6/30/2013 - PDF - English -
Learn More€151.00 -
BS ISO 5892:2013
Rubber building gaskets. Materials for preformed solid vulcanized structural gaskets. Specification
6/30/2013 - PDF - English -
Learn More€180.00 -
BS EN 16245-3:2013
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fibre
6/30/2013 - PDF - English -
Learn More€180.00 -
BS EN 16245-1:2013
Fibre-reinforced plastic composites. Declaration of raw material characteristics General requirements
6/30/2013 - PDF - English -
Learn More€151.00 -
BS EN 16245-4:2013
Fibre-reinforced plastic composites. Declaration of raw material characteristics Specific requirements for fabrics
6/30/2013 - PDF - English -
Learn More€180.00 -
BS EN 13418:2013
Plastics and rubber machines. Winding machines for film or sheet. Safety requirements
6/30/2013 - PDF - English -
Learn More€348.00 -
NBN EN 16245-1:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
6/21/2013 - PDF - English -
Learn More€58.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - German -
Learn More€58.00 -
NBN EN 16245-4:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
6/21/2013 - PDF - German -
Learn More€58.00 -
NBN EN 16245-1:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
6/21/2013 - PDF - French -
Learn More€58.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - English -
Learn More€58.00 -
NBN EN 16245-4:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
6/21/2013 - PDF - English -
Learn More€58.00 -
NBN EN 16245-1:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 1: General requirements
6/21/2013 - PDF - German -
Learn More€58.00 -
NBN EN ISO 75-2:2013
Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013)
6/21/2013 - PDF - French -
Learn More€58.00 -
NBN EN 16245-4:2013
Fibre-reinforced plastic composites - Declaration of raw material characteristics - Part 4: Specific requirements for fabrics
6/21/2013 - PDF - French -
Learn More€58.00 -
JIS B 2402-4:2013 (R2023)
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 4: Performance test procedures
6/20/2013 - PDF - English -
Learn More€101.00 -
JIS B 2402-3:2013 (R2023)
Rotary shaft lip-type seals incorporating elastomeric sealing elements - Part 3: Storage, handling and installation
6/20/2013 - PDF - English -
Learn More€58.00 -
ISO/TS 17796:2013 (R2024)
Rubber
Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
6/19/2013 - Paper - French -
Learn More€110.00 -
ISO/TS 17796:2013 (R2024)
Rubber
Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection
6/19/2013 - Paper - English -
Learn More€110.00 -
€48.00
-
€48.00
-
ISO 5892:2013 (R2018)
Rubber building gaskets
Materials for preformed solid vulcanized structural gaskets
6/3/2013 - Paper - English -
Learn More€72.00 -
NF EN ISO 75-2, T51-005-2 (06/2013)
Plastics - Determination of temperature of deflection under load - Part 2 : plastics and ebonite - Plastiques
6/1/2013 - Paper - French -
Learn More€60.67 -
DIN EN ISO 472:2013-06
Plastics - Vocabulary (ISO 472:2013), Trilingual version EN ISO 472:2013
6/1/2013 - PDF - English, French, German -
Learn More€32.34 -
NBN EN ISO 4892-2:2013
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
5/31/2013 - PDF - French -
Learn More€89.00 -
€58.00
-
€58.00
-
NBN EN ISO 4892-2:2013
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
5/31/2013 - PDF - German -
Learn More€89.00 -
€58.00
-
NBN EN ISO 4892-2:2013
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013)
5/31/2013 - PDF - English -
Learn More€89.00 -
CEN/TS 14999:2013
Klebstoffe für thermoplastische Rohrleitungssysteme - Prüfung von Klebstoffen bei künstlicher Alterung im Lagerbehälter
5/22/2013 - PDF - German -
Learn More€37.00 -
CEN/TS 14999:2013
Adhesives for thermoplastic piping systems - Accelerated ageing test in storage container
5/22/2013 - PDF - English -
Learn More€37.00 -
€41.86
-
UNE-EN 828:2013 (R2018)
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
5/14/2013 - PDF - Spanish -
Learn More€57.00 -
ISO 16565:2013 (R2023)
Rubber
Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers
5/14/2013 - Paper - English -
Learn More€110.00 -
UNE-EN 828:2013 (R2018)
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
5/14/2013 - PDF - English -
Learn More€68.40 -
DIN EN 1242:2013-05
Adhesives - Determination of isocyanate content, German version EN 1242:2013
5/1/2013 - PDF - German -
Learn More€45.98 -
€57.57
-
BS EN ISO 75-2:2013
Plastics. Determination of temperature deflection under load Plastics and ebonite
4/30/2013 - PDF - English -
Learn More€180.00 -
BS ISO 12815:2013
Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength
4/30/2013 - PDF - English -
Learn More€250.00 -
BS EN ISO 19712-2:2013
Plastics. Decorative solid surfacing materials Determination of properties. Sheet goods
4/30/2013 - PDF - English -
Learn More€348.00 -
€37.00
-
UNE-CEN/TR 852:2013 IN
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values
4/24/2013 - PDF - Spanish -
Learn More€68.00 -
UNE-CEN/TR 852:2013 IN
Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Guidance on the interpretation of laboratory derived migration values
4/24/2013 - PDF - English -
Learn More€81.60 -
€25.00
-
€72.00
-
€72.00
-
ISO 75-2:2013 (R2018)
Plastics
Determination of temperature of deflection under load
4/9/2013 - Paper - French -
Learn More€72.00 -
ISO 75-2:2013 (R2018)
Plastics
Determination of temperature of deflection under load
4/9/2013 - Paper - English -
Learn More€72.00 -
DIN EN ISO 19712-2:2013-04
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007), German version EN ISO 19712-2:2013
4/1/2013 - PDF - German -
Learn More€120.84 -
DIN EN ISO 19712-1:2013-04
Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008), German version EN ISO 19712-1:2013
4/1/2013 - PDF - German -
Learn More€59.63 -
DIN EN 828:2013-04
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface, German version EN 828:2013
4/1/2013 - PDF - German -
Learn More€52.90 -
DIN EN ISO 14855-1:2013-04
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
4/1/2013 - PDF - English -
Learn More€115.98 -
DIN EN ISO 19712-2:2013-04
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
4/1/2013 - PDF - English -
Learn More€150.93 -
XP CEN/TS 16010, T50-809 (04/2013)
Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates - Plastiques
4/1/2013 - Paper - French -
Learn More€73.23 -
XP CEN/TS 16011, T50-810 (04/2013)
Plastics - Recycled plastics - Sample preparation - Plastiques
4/1/2013 - Paper - French -
Learn More€86.67 -
NF EN ISO 19712-2, T54-370-2 (04/2013)
Plastics - Decorative solid surfacing materials - Part 2 : determination of properties - Sheet goods - Plastiques
4/1/2013 - Paper - French -
Learn More€111.00 -
DIN EN ISO 19712-1:2013-04
Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
4/1/2013 - PDF - English -
Learn More€74.58 -
DIN CEN/TS 16011*DIN SPEC 91011:2013-04
Plastics - Recycled plastics - Sample preparation, German version CEN/TS 16011:2013
4/1/2013 - PDF - German -
Learn More€68.60 -
DIN EN 828:2013-04
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
4/1/2013 - PDF - English -
Learn More€66.07 -
€288.00
-
DIN EN ISO 14855-1:2013-04
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012), German version EN ISO 14855-1:2012
4/1/2013 - PDF - German -
Learn More€92.62 -
NF EN ISO 4892-2, T51-195-2 (04/2013)
Plastics - Methods of exposure to laboratory light sources - Part 2 : xenon-arc lamps - Plastiques
4/1/2013 - Paper - French -
Learn More€75.67 -
€151.00
-
BS ISO 12817:2013
Fibre-reinforced plastic composites. Determination of open-hole compression strength
3/31/2013 - PDF - English -
Learn More€250.00 -
13/30272895 DC:2013
BS ISO/IEC 19788-1 AMD1. Information technology. Learning, education and training. Metadata for learning resources. Part 1. Framework
3/28/2013 - PDF - English -
Learn More€24.00 -
13/30266440 DC:2013
BS ISO 13007-1. Ceramic tiles. Grouts and adhesives. Part 1. Terms, definitions and specifications for adhesives
3/27/2013 - PDF - English -
Learn More€24.00 -
NBN EN 828:2013
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
3/22/2013 - PDF - German -
Learn More€58.00 -
NBN EN ISO 19712-1:2013
Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
3/22/2013 - PDF - French -
Learn More€58.00 -
NBN EN ISO 19712-2:2013
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
3/22/2013 - PDF - French -
Learn More€163.00 -
NBN EN 828:2013
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
3/22/2013 - PDF - English -
Learn More€58.00 -
NBN EN ISO 19712-1:2013
Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
3/22/2013 - PDF - German -
Learn More€58.00 -
NBN EN ISO 19712-2:2013
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
3/22/2013 - PDF - German -
Learn More€163.00 -
NBN EN 828:2013
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface
3/22/2013 - PDF - French -
Learn More€58.00 -
NBN EN ISO 19712-1:2013
Plastics - Decorative solid surfacing materials - Part 1: Classification and specifications (ISO 19712-1:2008)
3/22/2013 - PDF - English -
Learn More€58.00 -
NBN EN ISO 19712-2:2013
Plastics - Decorative solid surfacing materials - Part 2: Determination of properties - Sheet goods (ISO 19712-2:2007)
3/22/2013 - PDF - English -
Learn More€163.00 -
JIS A 5760:2013 (R2017)
Structural gaskets used in buildings - Classification, specification and test methods
3/21/2013 - PDF - Japanese -
Learn More€36.27 -
JIS A 5756:2013 (R2017)
Performed gaskets used in buildings - Classification, specifications and test methods
3/21/2013 - PDF - Japanese -
Learn More€46.02 -
UNE-ISO 1628-4:2013
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
3/20/2013 - PDF - Spanish -
Learn More€57.00 -
UNE-ISO 1628-6:2013
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
3/20/2013 - PDF - Spanish -
Learn More€53.00 -
€72.00
-
€72.00
-
€0.00
-
ISO 12817:2013 (R2018)
Fibre-reinforced plastic composites
Determination of open-hole compression strength
3/5/2013 - Paper - English -
Learn More€110.00 -
NF EN 60893-3-4/A1, C26-183-4/A1 (03/2013)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-4 : specifications for individual materials - Requirements for rigid laminated sheets based on phenolic resins - Matériaux isolants
3/1/2013 - Paper - French -
Learn More€54.67 -
NF T51-805 (03/2013)
Plastics - Verification of the performances of infrared spectrophotometers - Plastiques
3/1/2013 - Paper - French -
Learn More€48.00 -
DVS 2204-5:2013-03
Adhesive bonding of pipes and fittings made of thermoplastics - Chlorinated polyvinyl chloride (PVC-C)
3/1/2013 - PDF - German -
Learn More€30.75 -
€110.00
-
€250.00 -
€110.00
-
ISO 12815:2013 (R2018)
Fibre-reinforced plastic composites
Determination of plain-pin bearing strength
2/25/2013 - Paper - English -
Learn More€110.00 -
NBN EN ISO 14855-1:2013
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
2/22/2013 - PDF - English -
Learn More€142.00 -
NBN EN ISO 14855-1:2013
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
2/22/2013 - PDF - French -
Learn More€142.00 -
NBN EN ISO 14855-1:2013
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions - Method by analysis of evolved carbon dioxide - Part 1: General method (ISO 14855-1:2012)
2/22/2013 - PDF - German -
Learn More€142.00 -
€25.00
-
DIN ISO 1652:2013-02
Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011)
2/1/2013 - PDF - English -
Learn More€74.58 -
DIN EN ISO 9080:2013-02
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012), German and English version EN ISO 9080:2012
2/1/2013 - PDF - English, German -
Learn More€120.84 -
NF EN 828, T76-150 (02/2013)
Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface - Adhésifs
2/1/2013 - Paper - French -
Learn More€48.00 -
NF EN 60893-3-1, C26-183-1 (02/2013)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-1 : specifications for individual materials - Types of industrial rigid laminated sheets - Matériaux isolants
2/1/2013 - Paper - French -
Learn More€69.50 -
DIN ISO 1652:2013-02
Rubber latex - Determination of apparent viscosity by the Brookfield test method (ISO 1652:2011)
2/1/2013 - PDF - German -
Learn More€59.63 -
BS EN 828:2013
Adhesives. Wettability. Determination by measurement of contact angle and surface free energy of solid surface
1/31/2013 - PDF - English -
Learn More€180.00 -
€377.00 -
UNE-EN ISO 3673-2:2013
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
1/23/2013 - PDF - English -
Learn More€63.60 -
CEN/TS 16011:2013
Plastiques - Plastiques recyclés - Préparation des échantillons
1/23/2013 - PDF - French -
Learn More€121.00 -
€121.00
-
UNE-EN ISO 3673-2:2013
Plastics - Epoxy resins - Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins (ISO 3673-2:2012)
1/23/2013 - PDF - Spanish -
Learn More€53.00 -
€121.00
-
ISO 6427:2013 (R2018)
Plastics
Determination of matter extractable by organic solvents (conventional methods)
1/22/2013 - Paper - French -
Learn More€110.00 -
ISO 6427:2013 (R2018)
Plastics
Determination of matter extractable by organic solvents (conventional methods)
1/22/2013 - Paper - English -
Learn More€110.00 -
ASTM D3642-13(2021)
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM D5897-13(2021) + Redline
Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM D5538-13(2023)
Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
1/1/2013 - PDF - English -
Learn More€48.00 -
ASTM D1148-13(2018)
Standard Test Method for Rubber Deterioration—,Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM D6267/D6267M-13(2022) + Redline
Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
1/1/2013 - PDF - English -
Learn More€57.00 -
ASTM D6289-13(2019)
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM F2523-13(2020)
Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
1/1/2013 - PDF - English -
Learn More€51.00 -
ASTM F964-13(2019) + Redline
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
1/1/2013 - PDF - English -
Learn More€61.00 -
ASTM D4819-13(2021)e1
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM F2787-13(2018)
Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
1/1/2013 - PDF - English -
Learn More€74.00 -
ASTM D5266-13(2020) + Redline
Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
1/1/2013 - PDF - English -
Learn More€61.00 -
€46.00 -
ASTM D1499-13(2021) + Redline
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
1/1/2013 - PDF - English -
Learn More€61.00 -
ASTM C1183/C1183M-13(2018) + Redline
Standard Test Method for Extrusion Rate of Elastomeric Sealants
1/1/2013 - PDF - English -
Learn More€53.00 -
FD CEN/TR 16364, P41-255 (01/2013)
Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling - Influence des matériaux sur l'eau destinée à la consommation humaine
1/1/2013 - Paper - French -
Learn More€86.50 -
ASTM D3642-13(2021) + Redline
Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM D5538-13(2023) + Redline
Standard Practice for Thermoplastic Elastomers—Terminology and Abbreviations
1/1/2013 - PDF - English -
Learn More€57.00 -
ASTM D1148-13(2018) + Redline
Standard Test Method for Rubber Deterioration—,Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM D5675-13(2023)
Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
1/1/2013 - PDF - English -
Learn More€52.00 -
ASTM D6289-13(2019) + Redline
Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM F2523-13(2020) + Redline
Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
1/1/2013 - PDF - English -
Learn More€61.00 -
NF EN 60893-3-3/A1, C26-183-3/A1 (01/2013)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-3 : Specifications for individual materials - Requirements for rigid laminated sheets based on melamine resins - Matériaux isolants
1/1/2013 - Paper - French -
Learn More€54.67 -
ASTM D5897-13(2021)
Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method
1/1/2013 - PDF - English -
Learn More€46.00 -
ASTM D4819-13(2021)e1 + Redline
Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM F2787-13(2018) + Redline
Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
1/1/2013 - PDF - English -
Learn More€87.00 -
ASTM D6267/D6267M-13(2022)
Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures
1/1/2013 - PDF - English -
Learn More€48.00 -
€53.00
-
ASTM F964-13(2019)
Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
1/1/2013 - PDF - English -
Learn More€51.00 -
ASTM D1201-13(2022)e1 + Redline
Standard Specification for Thermosetting Polyester Molding Compounds
1/1/2013 - PDF - English -
Learn More€53.00 -
ASTM D4364-13(2022)e1 + Redline
Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
1/1/2013 - PDF - English -
Learn More€61.00 -
ASTM D4066-13(2019) + Redline
Standard Classification System for Nylon Injection and Extrusion Materials (PA)
1/1/2013 - PDF - English -
Learn More€68.00 -
ASTM D5266-13(2020)
Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
1/1/2013 - PDF - English -
Learn More€51.00 -
ASTM D5675-13(2023) + Redline
Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
1/1/2013 - PDF - English -
Learn More€63.00 -
ASTM D1499-13(2021)
Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
1/1/2013 - PDF - English -
Learn More€51.00 -
ASTM C1183/C1183M-13(2018)
Standard Test Method for Extrusion Rate of Elastomeric Sealants
1/1/2013 - PDF - English -
Learn More€46.00 -
BS ISO 15398:2012
Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
12/31/2012 - PDF - English -
Learn More€250.00 -
BS EN ISO 14855-1:2012
Determination of the ultimate aerobic biodegradability plastic materials under controlled composting conditions. Method by analysis evolved carbon dioxide General method
12/31/2012 - PDF - English -
Learn More€250.00 -
UNE-EN ISO 26986:2012/AC:2012
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
12/26/2012 - PDF - Spanish -
Learn More€0.00 -
UNE-EN ISO 26986:2012/AC:2012
Resilient floor coverings - Expanded (cushioned) poly(vinyl chloride) floor covering - Specification (ISO 26986:2010)
12/26/2012 - PDF - English -
Learn More€0.00 -
JIS K 7315-1:2012 (R2017)
Plastics - Polyphenylene Sulfide (PPS) moulding and extrusion materials - Part 1: Designation systems and basis for specifications
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
JIS K 6237:2012 (R2017)
Styrene-butadiene rubber, raw - Determination of soap and organic-acid content
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
€36.27
-
JIS K 6299:2012 (R2017)
Rubber test mixes - Preparation, mixing and vulcanization - Equipment and procedures
12/20/2012 - PDF - Japanese -
Learn More€36.27 -
JIS K 6807:2012 (R2017)
General testing methods of formaldehyde resin adhesives for wood
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
JIS K 7315-2:2012 (R2017)
Plastics - Polyphenylene Sulfide (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
JIS K 6400-7:2012 (R2017)
Flexible cellular polymeric materials-physical properties - Part 7: Determination of air flow value
12/20/2012 - PDF - Japanese -
Learn More€25.00 -
€41.86
-
JIS K 7111-1:2012 (R2017)
Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test
12/20/2012 - PDF - Japanese -
Learn More€36.27 -
JIS K 6241:2012 (R2017)
Rubber - Identification of antidegradants by gas chromatography/mass spectrometry
12/20/2012 - PDF - Japanese -
Learn More€50.18 -
€25.00
-
UNE 135362-2:2012 (R2018)
Vertical signs. Road delineators. Part 2: Signs posts done in different material than rigid PVC. Characteristics, dimensions and test methods.
12/12/2012 - PDF - Spanish -
Learn More€53.00 -
ISO 12243:2003/Amd 1:2012
Medical gloves made from natural rubber latex
Determination of water-extractable protein using the modified Lowry method
12/12/2012 - Paper - English -
Learn More€21.00 -
€248.00
-
€248.00
-
12/30276314 DC:2012
NA to BS EN 1013. Light transmitting single skin profiled plastic sheets for internal and external roofs, walls and ceilings. Requirements and test methods
12/5/2012 - PDF - English -
Learn More€24.00 -
NF EN 60893-3-2/A1, C26-183-2/A1 (12/2012)
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-2 : specification for individual materials - Requirements for rigid laminated sheets based on epoxy resins - Matériaux isolants
12/1/2012 - Paper - French -
Learn More€88.33 -
ISO 15398:2012 (R2023)
Specifications for thermoplastics covers and frames for manholes and inspection chambers used in non-traffic areas
General information
11/30/2012 - Paper - English -
Learn More€110.00 -
BS ISO 6772:2012
Aerospace. Fluid systems. Impulse testing of hydraulic hose, tubing and fitting assemblies
11/30/2012 - PDF - English -
Learn More€180.00 -
UNE-EN 650:2012 (R2018)
Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification
11/28/2012 - PDF - English -
Learn More€72.00 -
UNE-EN 650:2012 (R2018)
Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification
11/28/2012 - PDF - Spanish -
Learn More€60.00 -
ISO 14855-1:2012 (R2022)
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions
Method by analysis of evolved carbon dioxide
11/26/2012 - Paper - French -
Learn More€148.00 -
ISO 14855-1:2012 (R2022)
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions
Method by analysis of evolved carbon dioxide
11/26/2012 - Paper - English -
Learn More€148.00 -
UNE-EN ISO 527-2:2012
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
11/21/2012 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 22007-3:2012
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
11/21/2012 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 527-2:2012
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
11/21/2012 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 22007-3:2012
Plastics - Determination of thermal conductivity and thermal diffusivity - Part 3: Temperature wave analysis method (ISO 22007-3:2008)
11/21/2012 - PDF - English -
Learn More€81.60 -
ISO 13507:2012 (R2022)
Rubber compounds, raw rubbers and compounding materials
Short terms for properties reported in certificates of analysis
11/8/2012 - Paper - English -
Learn More€48.00 -
DIN ISO 28238:2012-11
Compression and injection moulds - Components for gating systems (ISO 28238:2010)
11/1/2012 - PDF - English -
Learn More€91.12 -
DVS 2202 Beiblatt 3:2012-11
Assessment of defects in joints between thermoplastics on piping parts and panels - Heated tool sleeve welding (HD)
11/1/2012 - - -
Learn More€21.85 -
NF EN 650, P62-301 (11/2012)
Resilient floor coverings - Polyvinyl chloride floor coverings on jute backing or on polyester felt backing or on a polyester felt with a polyvinyl chloride backing - Specification - Revêtements de sol résilients
11/1/2012 - Paper - French -
Learn More€60.67 -
DIN 16941:2012-11
Thermoplastics extruded profiles - General tolerances of size, form and orientation
11/1/2012 - PDF - German -
Learn More€52.90 -
DIN ISO 28238:2012-11
Compression and injection moulds - Components for gating systems (ISO 28238:2010)
11/1/2012 - PDF - German -
Learn More€72.80 -
DIN 16941:2012-11
Thermoplastics extruded profiles - General tolerances of size, form and orientation
11/1/2012 - PDF - English -
Learn More€66.07 -
DVS 2202 Beiblatt 2:2012-11
Assessment of defects in joints between thermoplastics on piping parts and panels - Sleeve welding with an incorporated heating element (HM)
11/1/2012 - - -
Learn More€29.91 -
BS ISO 12492:2012
Rubber, raw. Determination of water content by Karl Fischer method
10/31/2012 - PDF - English -
Learn More€180.00 -
BS ISO 7270-2:2012
Rubber. Analysis by pyrolytic gas-chromatographic methods Determination of styrene/butadiene/isoprene ratio
10/31/2012 - PDF - English -
Learn More€180.00
