83 : Rubber and plastic industries
-
€175.00 -
ASTM F1649-20
Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
10/1/2020 - PDF - English -
Learn More€57.00 -
NF EN ISO 16486-2, T54-066-2 (10/2020)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 2 : pipes
10/1/2020 - Paper - French -
Learn More€75.67 -
BS EN ISO 10352:2020
Fibre-reinforced plastics. Moulding compounds and prepregs. Determination of mass per unit area and fibre mass per unit area
9/30/2020 - PDF - English -
Learn More€250.00 -
BS EN ISO 19063-2:2020
Plastics. Impact-resistant polystyrene (PS-I) moulding and extrusion materials Preparation of test specimens determination properties
9/29/2020 - PDF - English -
Learn More€180.00 -
BS ISO 5893:2019+A1:2020
Rubber and plastics test equipment. Tensile, flexural and compression types (constant rate of traverse). Specification
9/25/2020 - PDF - English -
Learn More€151.00 -
NBN EN ISO 10350-2:2020
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
9/23/2020 - PDF - English -
Learn More€58.00 -
€250.00 -
NBN ISO 10499-1:2020
Industrial tyres and rims — Rubber solid tyres (metric series) for pneumatic tyre rims — Part 1: Designation, dimensions and marking ISO 10499-1:2019
9/23/2020 - PDF - English -
Learn More€37.00 -
NBN EN ISO 10350-2:2020
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
9/23/2020 - PDF - French -
Learn More€58.00 -
NBN EN ISO 3949:2020
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)
9/23/2020 - PDF - German -
Learn More€89.00 -
NBN ISO 16392:2020
Tyres — Electrical resistance — Test method for measuring electrical resistance of tyres on a test rig ISO 16392:2017
9/23/2020 - PDF - English -
Learn More€58.00 -
NBN EN 12608-1:2016+A1:2020
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
9/23/2020 - PDF - German -
Learn More€121.00 -
NBN EN ISO 10350-2:2020
Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforced plastics (ISO 10350-2:2020)
9/23/2020 - PDF - German -
Learn More€58.00 -
NBN EN ISO 3949:2020
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)
9/23/2020 - PDF - English -
Learn More€89.00 -
NBN EN 12608-1:2016+A1:2020
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
9/23/2020 - PDF - English -
Learn More€121.00 -
NBN ISO 10499-1:2020
Industrial tyres and rims ? Rubber solid tyres (metric series) for pneumatic tyre rims ? Part 1: Designation, dimensions and marking
9/23/2020 - PDF - French -
Learn More€37.00 -
NBN EN ISO 3949:2020
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2020, Corrected version 2020-12)
9/23/2020 - PDF - French -
Learn More€89.00 -
NBN ISO 16392:2020
Tyres ? Electrical resistance ? Test method for measuring electrical resistance of tyres on a test rig
9/23/2020 - PDF - French -
Learn More€58.00 -
€293.00 -
NBN EN 12608-1:2016+A1:2020
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1: Non-coated PVC-U profiles with light coloured surfaces
9/23/2020 - PDF - French -
Learn More€121.00 -
BS EN ISO 24022-1:2020
Plastics. Polystyrene (PS) moulding and extrusion materials Designation system basis for specifications
9/22/2020 - PDF - English -
Learn More€151.00 -
ISO 5893:2019/Amd 1:2020
Rubber and plastics test equipment
Tensile, flexural and compression types (constant rate of traverse)
9/21/2020 - Paper - English -
Learn More€21.00 -
BS ISO 23706:2020
Plastics. Determination of apparent activation energies of property changes in standard weathering test methods
9/17/2020 - PDF - English -
Learn More€250.00 -
BS ISO 8066-3:2020
Rubber and plastics hoses hose assemblies for automotive air conditioning. Specification Refrigerant 1234yf
9/16/2020 - PDF - English -
Learn More€293.00 -
€51.00 -
BS EN 17408:2020
Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
9/15/2020 - PDF - English -
Learn More€180.00 -
€61.00
-
€109.20 -
UNE-EN ISO 11833-1:2020
Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)
9/9/2020 - PDF - English -
Learn More€84.00 -
UNE-EN ISO 20558-2:2020
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018)
9/9/2020 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 20558-2:2020
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 2: Preparation of test specimen and determination of properties (ISO 20558-2:2018)
9/9/2020 - PDF - English -
Learn More€69.60 -
€91.00
-
UNE-EN ISO 11833-1:2020
Plastics - Unplasticized poly(vinyl chloride) sheets - Part 1: Types, dimensions and characteristics for sheets of thickness not less than 1 mm (ISO 11833-1:2019)
9/9/2020 - PDF - Spanish -
Learn More€70.00 -
BS EN 12608-1:2016+A1:2020
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors. Classification, requirements test methods Non-coated PVC-U with light coloured surfaces
9/4/2020 - PDF - English -
Learn More€250.00 -
DIN EN ISO 24026-2:2020-09
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020), German version EN ISO 24026-2:2020
9/1/2020 - PDF - German -
Learn More€65.89 -
€108.33
-
ASTM D5990-20a + Redline
Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
9/1/2020 - PDF - English -
Learn More€61.00 -
ASTM E1556-20
Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
9/1/2020 - PDF - English -
Learn More€51.00 -
ASTM E1555-20 + Redline
Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
9/1/2020 - PDF - English -
Learn More€61.00 -
DIN EN ISO 24022-2:2020-09
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020), German version EN ISO 24022-2:2020
9/1/2020 - PDF - German -
Learn More€65.89 -
ASTM D4065-20 + Redline
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
9/1/2020 - PDF - English -
Learn More€61.00 -
VDA 290-120:2020-09
Test Method to determine resistances - Characterization of material Properties of Elastomeric Materials in Continuous Contact with Urea Solution AUS32/AdBlue®
9/1/2020 - PDF - English, German -
Learn More€150.00 -
€60.67
-
UNE-CEN/TR 17511:2020
Materials obtained from End-of-Life Tyres - Odour of ELT granulates - Origin and remediation possibilities (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English -
Learn More€46.00 -
DIN EN 14963-1:2020-09
Prefabricated accessories for roofing - Part 1: Continuous plastic rooflights - Product specification and test methods, German and English version prEN 14963-1:2020
9/1/2020 - PDF - English, German -
Learn More€179.72 -
ASTM E865-20 + Redline
Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
9/1/2020 - PDF - English -
Learn More€53.00 -
ASTM D5048-20a
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
9/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D6270-20 + Redline
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
9/1/2020 - PDF - English -
Learn More€87.00 -
NF EN ISO 16486-3, T54-066-3 (09/2020)
Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3 : fittings
9/1/2020 - Paper - French -
Learn More€86.67 -
NF EN 17408, T76-139 (09/2020)
Determination of the flowability and application behaviour of viscoelastic adhesives using the oscillatory rheometry
9/1/2020 - Paper - French -
Learn More€75.67 -
ASTM D3453-20
Standard Specification for Flexible Cellular Materials—,Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
9/1/2020 - PDF - English -
Learn More€46.00 -
NF EN ISO 10352, T57-511 (09/2020)
Fibre-reinforced plastics - Moulding compounds and prepregs - Determination of mass per unit area and fibre mass per unit area
9/1/2020 - Paper - French -
Learn More€75.67 -
ASTM E1556-20 + Redline
Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
9/1/2020 - PDF - English -
Learn More€61.00 -
NF EN ISO 19063-2, T53-034-2 (09/2020)
Plastics - Impact-resistant polystyrene (PS-I) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties
9/1/2020 - Paper - French -
Learn More€48.00 -
ASTM D3801-20a
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
9/1/2020 - PDF - English -
Learn More€51.00 -
DIN EN ISO 24026-1:2020-09
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020), German version EN ISO 24026-1:2020
9/1/2020 - PDF - German -
Learn More€65.89 -
ASTM D5990-20a
Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
9/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D5048-20a + Redline
Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
9/1/2020 - PDF - English -
Learn More€61.00 -
FD CEN/TR 17511, T47-768 (09/2020)
Materials obtained from End-of-Life Tyres - Odour of ELT granulates - Origin and remediation possibilities
9/1/2020 - Paper - French -
Learn More€48.00 -
ASTM E1555-20
Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
9/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D4065-20
Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
9/1/2020 - PDF - English -
Learn More€51.00 -
DIN EN ISO 179-2:2020-09
Plastics - Determination of Charpy impact properties - Part 2: Instrumented impact test (ISO 179-2:2020), German version EN ISO 179-2:2020
9/1/2020 - PDF - German -
Learn More€92.62 -
NF EN ISO 24022-1, T53-030-1 (09/2020)
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1 : designation system and basis for specifications
9/1/2020 - Paper - French -
Learn More€48.00 -
UNE-CEN/TR 17509:2020
Materials obtained from End-of-Life Tyres - Granulated rubber - Determination of textile fiber content by visual index (qualitative method) (Endorsed by Asociación Española de Normalización in September of 2020.)
9/1/2020 - PDF - English -
Learn More€70.00 -
ASTM D3453-20 + Redline
Standard Specification for Flexible Cellular Materials—,Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
9/1/2020 - PDF - English -
Learn More€53.00 -
ASTM E865-20
Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
9/1/2020 - PDF - English -
Learn More€46.00 -
ASTM D3801-20a + Redline
Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
9/1/2020 - PDF - English -
Learn More€61.00 -
ASTM D6270-20
Standard Practice for Use of Scrap Tires in Civil Engineering Applications
9/1/2020 - PDF - English -
Learn More€74.00 -
€121.00
-
NBN EN ISO 1628-2:2020
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
8/27/2020 - PDF - German -
Learn More€89.00 -
NBN EN ISO 294-3:2020
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
8/27/2020 - PDF - English -
Learn More€58.00 -
NBN ISO 20911:2020
Radio frequency identification (RFID) tyre tags ? Tyre attachment classification
8/27/2020 - PDF - French -
Learn More€37.00 -
NBN EN ISO 294-3:2020
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
8/27/2020 - PDF - French -
Learn More€58.00 -
€89.00
-
NBN ISO 18807:2020
Tyres and rims for logging and forestry service ISO 18807:2019
8/27/2020 - PDF - English -
Learn More€121.00 -
NBN EN ISO 1628-2:2020
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
8/27/2020 - PDF - English -
Learn More€89.00 -
NBN ISO 20911:2020
Radio frequency identification (RFID) tyre tags — Tyre attachment classification ISO 20911:2020
8/27/2020 - PDF - English -
Learn More€37.00 -
NBN EN ISO 1628-2:2020
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly(vinyl chloride) resins (ISO 1628-2:2020)
8/27/2020 - PDF - French -
Learn More€89.00 -
NBN EN ISO 294-3:2020
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates (ISO 294-3:2020)
8/27/2020 - PDF - German -
Learn More€58.00 -
NBN ISO 20912:2020
Conformance test methods for RFID enabled tyres ISO 20912:2020
8/27/2020 - PDF - English -
Learn More€89.00 -
20/30393550 DC:2020
BS EN 14963-1. Prefabricated accessories for roofing Part 1. Continuous plastic rooflights. Product specification and test methods
8/24/2020 - PDF - English -
Learn More€24.00 -
BS ISO 4659:2020
Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches). Evaluation procedure
8/24/2020 - PDF - English -
Learn More€180.00 -
BS ISO 1409:2020
Plastics/rubber. Polymer dispersions and rubber latices (natural and synthetic). Determination of surface tension
8/24/2020 - PDF - English -
Learn More€180.00 -
BS EN ISO 10350-2:2020
Plastics. Acquisition and presentation of comparable single-point data Long-fibre-reinforced plastics
8/24/2020 - PDF - English -
Learn More€180.00 -
BS ISO 4097:2020
Rubber, ethylene-propylene-diene (EPDM). Evaluation procedure
8/21/2020 - PDF - English -
Learn More€180.00 -
€24.00 -
BS ISO 3877-4:1984+A1:2020
Tyres, valves and tubes. List of equivalent terms Solid tyres
8/14/2020 - PDF - English -
Learn More€180.00 -
€180.00 -
€151.00 -
BS ISO 2000:2020
Rubber, raw natural. Guidelines for the specification of technically specified rubber (TSR)
8/4/2020 - PDF - English -
Learn More€151.00 -
BS ISO 4652:2020
Rubber compounding ingredients. Carbon black. Determination of specific surface area by nitrogen adsorption methods. Single-point procedures
8/3/2020 - PDF - English -
Learn More€250.00 -
20/30395444 DC:2020
BS EN 12004-1. Adhesives for ceramic tiles Part 1. Essential characteristics and AVCP
8/3/2020 - PDF - English -
Learn More€24.00 -
NF L17-124 (08/2020)
Aerospace series - Butadiene - Acrylonitrile rubbers - Class 24 - Characteristics
8/1/2020 - Paper - English, French -
Learn More€43.50 -
ASTM D706-20
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
8/1/2020 - PDF - English -
Learn More€51.00 -
NF ISO 26842-1, T76-340-1 (08/2020)
Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 1 : resistance to delamination in non-severe environments - Adhésifs - Méthodes d'essai pour la sélection et l'évaluation des adhésifs destinés aux produits en bois pour utilisé à l'intérieur - Partie 1 : Résistance à la délamination dans des environnements non sévères
8/1/2020 - Paper - French -
Learn More€48.00 -
ASTM D2855-20
Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
8/1/2020 - PDF - English -
Learn More€51.00 -
ASTM F619-20
Standard Practice for Extraction of Materials Used in Medical Devices
8/1/2020 - PDF - English -
Learn More€46.00 -
DIN EN ISO 16964:2020-08
Gas cylinders - Flexible hoses assemblies - Specification and testing (ISO 16964:2019), German version EN ISO 16964:2020
8/1/2020 - PDF - German -
Learn More€79.72 -
NF EN ISO 10350-2, T50-062-2 (08/2020)
Plastics - Acquisition and presentation of comparable single-point data - Part 2 : long-fibre-reinforced plastics
8/1/2020 - Paper - French -
Learn More€60.67 -
NF EN 12608-1+A1, P24-506-1 (08/2020)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1 : non-coated PVC-U profiles with light coloured surfaces
8/1/2020 - Paper - French -
Learn More€75.67 -
DIN EN ISO 24025-1:2020-08
Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020), German version EN ISO 24025-1:2020
8/1/2020 - PDF - German -
Learn More€72.80 -
NF L17-154 (08/2020)
Aerospace series - Elastomers - Silicones - Class 54 - Characteristics - Série aérospatiale - Elastomères - Silicones - Classe 54 - Caractéristiques
8/1/2020 - Paper - French -
Learn More€48.00 -
NF ISO 20911, U12-011 (08/2020)
Radio frequency identification (RFID) tyre tags - Tyre attachment classification
8/1/2020 - Paper - French -
Learn More€48.00 -
ASTM D706-20 + Redline
Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
8/1/2020 - PDF - English -
Learn More€61.00 -
NF ISO 26842-2, T76-340-2 (08/2020)
Adhesives - Test methods for the evaluation and selection of adhesives for indoor wood products - Part 2 : resistance to delamination in severe environments - Adhésifs - Méthodes d'essai pour la sélection et l'évaluation et la sélection des adhésifs destinés aux produits en bois utilisés à intérieur - Partie 2 : Résistance à la délamination dans des environnements sévères
8/1/2020 - Paper - French -
Learn More€48.00 -
ASTM D2855-20 + Redline
Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets
8/1/2020 - PDF - English -
Learn More€61.00 -
ASTM F619-20 + Redline
Standard Practice for Extraction of Materials Used in Medical Devices
8/1/2020 - PDF - English -
Learn More€53.00 -
NF ISO 2453, T46-071 (08/2020)
Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
8/1/2020 - Paper - French -
Learn More€60.67 -
DIN EN ISO 24023-1:2020-08
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24023-1:2020), German version EN ISO 24023-1:2020
8/1/2020 - PDF - German -
Learn More€52.90 -
NF ISO 506, T42-016 (08/2020)
Rubber latex, natural, concentrate - Determination of volatile fatty acid number
8/1/2020 - Paper - French -
Learn More€48.00 -
NF EN 12608-1/IN1, P24-506-1/IN1 (08/2020)
Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods - Part 1 : non-coated PVC-U profiles with light coloured surfaces
8/1/2020 - Paper - French -
Learn More€23.00 -
UNE-EN ISO 20430:2020
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English -
Learn More€174.00 -
NF ISO 289-2, T43-005-2 (08/2020)
Rubber, unvulcanized - Determinations using a shearing-disc viscometer - Part 2 : determination of pre-vulcanization characteristics
8/1/2020 - Paper - French -
Learn More€60.67 -
DIN EN ISO 24025-2:2020-08
Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020), German version EN ISO 24025-2:2020
8/1/2020 - PDF - German -
Learn More€72.80 -
NF ISO 2921, T46-032 (08/2020)
Rubber, vulcanized - Determination of low-temperature characteristics - Temperature-retraction procedure (TR test)
8/1/2020 - Paper - French -
Learn More€75.67 -
€75.67
-
NF EN ISO 3949, T47-280 (08/2020)
Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification
8/1/2020 - Paper - French -
Learn More€75.67 -
VDA 675-240:2020-08
Test method to determine properties - Adhesion of elastomers to glass, painted sheet metal or other mating materials
8/1/2020 - PDF - English, German -
Learn More€175.00 -
DIN EN ISO 11357-2:2020-08
Plastics - Differential scanning calorimetry (DSC) - Part 2: Determination of glass transition temperature and step height (ISO 11357-2:2020), German version EN ISO 11357-2:2020
8/1/2020 - PDF - German -
Learn More€72.80 -
DIN EN ISO 24023-2:2020-08
Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24023-2:2020), German version EN ISO 24023-2:2020
8/1/2020 - PDF - German -
Learn More€59.63 -
NBN EN ISO 20430:2020
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
7/29/2020 - PDF - French -
Learn More€205.00 -
UNE-EN 17333-1:2020
Characterisation of one component foam - Part 1: Foam yield characteristics
7/29/2020 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 17333-2:2020
Characterisation of one component foam - Part 2: Expansion characteristics
7/29/2020 - PDF - English -
Learn More€85.20 -
NBN EN ISO 24026-2:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
7/29/2020 - PDF - French -
Learn More€58.00 -
NBN ISO 20910:2020
Coding for radio frequency identification (RFID) tyre tags ISO 20910:2019
7/29/2020 - PDF - English -
Learn More€58.00 -
NBN EN ISO 24022-2:2020
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020)
7/29/2020 - PDF - French -
Learn More€58.00 -
NBN EN ISO 19679:2020
Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
7/29/2020 - PDF - German -
Learn More€58.00 -
€81.60 -
NBN EN ISO 24026-1:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)
7/29/2020 - PDF - German -
Learn More€37.00 -
€53.00 -
NBN EN ISO 20430:2020
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
7/29/2020 - PDF - German -
Learn More€205.00 -
UNE-EN 17333-1:2020
Characterisation of one component foam - Part 1: Foam yield characteristics
7/29/2020 - PDF - English -
Learn More€81.60 -
UNE-EN 17333-4:2020
Characterisation of one component foam - Part 4: Mechanical strength
7/29/2020 - PDF - Spanish -
Learn More€74.00 -
NBN EN ISO 24026-2:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
7/29/2020 - PDF - German -
Learn More€58.00 -
€58.00
-
NBN EN ISO 24022-2:2020
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020)
7/29/2020 - PDF - German -
Learn More€58.00 -
NBN EN ISO 19679:2020
Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
7/29/2020 - PDF - English -
Learn More€58.00 -
UNE-EN 17333-2:2020
Characterisation of one component foam - Part 2: Expansion characteristics
7/29/2020 - PDF - Spanish -
Learn More€71.00 -
NBN EN ISO 24026-1:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)
7/29/2020 - PDF - English -
Learn More€37.00 -
€63.60
-
€58.00
-
NBN EN ISO 19679:2020
Plastics - Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface - Method by analysis of evolved carbon dioxide (ISO 19679:2020)
7/29/2020 - PDF - French -
Learn More€58.00 -
NBN EN ISO 20430:2020
Plastics and rubber machines - Injection moulding machines - Safety requirements (ISO 20430:2020)
7/29/2020 - PDF - English -
Learn More€205.00 -
€68.00
-
NBN EN ISO 24026-1:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020)
7/29/2020 - PDF - French -
Learn More€37.00 -
UNE-EN 17333-4:2020
Characterisation of one component foam - Part 4: Mechanical strength
7/29/2020 - PDF - English -
Learn More€88.80 -
NBN EN ISO 24026-2:2020
Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020)
7/29/2020 - PDF - English -
Learn More€58.00 -
NBN ISO 20909:2020
Radio frequency identification (RFID) tyre tags ISO 20909:2019
7/29/2020 - PDF - English -
Learn More€58.00 -
NBN EN ISO 24022-2:2020
Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020)
7/29/2020 - PDF - English -
Learn More€58.00 -
UNE-EN 17271:2020
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
7/22/2020 - PDF - Spanish -
Learn More€63.00 -
UNE-EN ISO 2440:2020
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
7/22/2020 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 20558-1:2020
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20558-1:2018)
7/22/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 3451-1:2020
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019)
7/22/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 4577:2020
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:2019)
7/22/2020 - PDF - English -
Learn More€72.00 -
UNE-EN 17228:2020
Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
7/22/2020 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 17271:2020
Plastics - Poly(vinyl chloride) (PVC) based profiles - Determination of the peel strength of profiles laminated with foils
7/22/2020 - PDF - English -
Learn More€75.60 -
UNE-EN ISO 2440:2020
Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019)
7/22/2020 - PDF - English -
Learn More€63.60 -
UNE-EN ISO 29988-1:2020
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)
7/22/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 3451-1:2020
Plastics - Determination of ash - Part 1: General methods (ISO 3451-1:2019)
7/22/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 20558-1:2020
Plastics - Poly(phenylene sulfide) (PPS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 20558-1:2018)
7/22/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 17228:2020
Plastics - Bio-based polymers, plastics, and plastics products - Terminology, characteristics and communication
7/22/2020 - PDF - English -
Learn More€81.60 -
UNE-EN ISO 4577:2020
Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method (ISO 4577:2019)
7/22/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 29988-1:2020
Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 29988-1:2019)
7/22/2020 - PDF - English -
Learn More€72.00 -
PD CEN/TS 1519-2:2020
Plastic piping systems for soil and waste discharge (low high temperature) within the building structure. Polyethylene (PE) Guidance assessment of conformity
7/21/2020 - PDF - English -
Learn More€250.00 -
BS EN ISO 1628-2:2020
Plastics. Determination of the viscosity polymers in dilute solution using capillary viscometers Poly(vinyl chloride) resins
7/21/2020 - PDF - English -
Learn More€180.00 -
PD ISO/TS 21488:2020
Plastics. Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation
7/21/2020 - PDF - English -
Learn More€250.00 -
20/30420214 DC:2020
BS EN 1455-1. Plastics piping systems for soil and waste discharge (low high temperature) within the building structure. Acrylonitrile-butadiene-styrene (ABS) Part 1. Requirements pipes, fittings system
7/20/2020 - PDF - English -
Learn More€24.00 -
BS EN ISO 294-3:2020
Plastics. Injection moulding of test specimens thermoplastic materials Small plates
7/20/2020 - PDF - English -
Learn More€180.00 -
€331.00 -
ASTM D1622-20 + Redline
Standard Test Method for Apparent Density of Rigid Cellular Plastics
7/15/2020 - PDF - English -
Learn More€61.00 -
ASTM D8333-20 + Redline
Standard Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS
7/15/2020 - PDF - English -
Learn More€53.00 -
€151.00 -
ASTM D8332-20 + Redline
Standard Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers
7/15/2020 - PDF - English -
Learn More€61.00 -
BS ISO 22768:2020
Raw rubber and rubber latex. Determination of the glass transition temperature by differential scanning calorimetry (DSC)
7/15/2020 - PDF - English -
Learn More€180.00 -
ASTM D8333-20
Standard Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS
7/15/2020 - PDF - English -
Learn More€46.00 -
ASTM D1622-20
Standard Test Method for Apparent Density of Rigid Cellular Plastics
7/15/2020 - PDF - English -
Learn More€51.00 -
ASTM D8332-20
Standard Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers
7/15/2020 - PDF - English -
Learn More€51.00 -
BS EN ISO 20430:2020
Plastics and rubber machines. Injection moulding machines. Safety requirements
7/9/2020 - PDF - English -
Learn More€449.00 -
BS EN ISO 19679:2020
Plastics. Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface. Method by analysis of evolved carbon dioxide
7/9/2020 - PDF - English -
Learn More€180.00 -
ASTM C393/C393M-20
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
7/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D4662-20 + Redline
Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
7/1/2020 - PDF - English -
Learn More€53.00 -
NF EN ISO 294-3, T51-294-3 (07/2020)
Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3 : small plates
7/1/2020 - Paper - French -
Learn More€60.67 -
ASTM D3769-20
Standard Test Method for Microcellular Urethanes—High-Temperature Sag
7/1/2020 - PDF - English -
Learn More€46.00 -
NF ISO 36, T46-008 (07/2020)
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabrics
7/1/2020 - Paper - French -
Learn More€60.67 -
DIN EN 17333-1:2020-07
Characterisation of one component foam - Part 1: Foam yield characteristics, German version EN 17333-1:2020
7/1/2020 - PDF - German -
Learn More€79.72 -
ASTM D4441-20 + Redline
Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
7/1/2020 - PDF - English -
Learn More€65.00 -
ASTM D792-20
Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
7/1/2020 - PDF - English -
Learn More€51.00 -
ASTM D6576-20 + Redline
Standard Specification for Flexible Cellular Rubber Chemically Blown
7/1/2020 - PDF - English -
Learn More€61.00 -
DIN EN ISO 19066-2:2020-07
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 19066-2:2020), German version EN ISO 19066-2:2020
7/1/2020 - PDF - German -
Learn More€72.80 -
UNE-EN 12301:2020
Plastics and rubber machines - Calenders - Safety requirements
7/1/2020 - PDF - English -
Learn More€126.00 -
ASTM D8335-20
Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials
7/1/2020 - PDF - English -
Learn More€57.00 -
NF EN ISO 1628-2, T51-061-2 (07/2020)
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2 : poly(vinyl chloride) resins - Plastiques - Détermination de la viscosité des polymères en solution diluée à l'aide de viscosimètres à capillaires - Partie 2 : résines de poly(chlorure de vinyle)
7/1/2020 - Paper - French -
Learn More€75.67 -
DIN CEN ISO/TR 18486:2020-07
Plastics - Parameters comparing the spectral irradiance of a laboratory light source for weathering applications to a reference solar spectral irradiance (ISO/TR 18486:2018), German version CEN ISO/TR 18486:2018
7/1/2020 - PDF - German -
Learn More€72.80 -
DIN EN 17333-5:2020-07
Characterisation of one component foam - Part 5: Insulation, German version EN 17333-5:2020
7/1/2020 - PDF - German -
Learn More€59.63 -
ASTM C393/C393M-20 + Redline
Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
7/1/2020 - PDF - English -
Learn More€61.00 -
ASTM D4001-20
Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering
7/1/2020 - PDF - English -
Learn More€57.00 -
DIN EN ISO 8659:2020-07
Thermoplastics valves - Fatigue strength - Test method (ISO 8659:2020), German version EN ISO 8659:2020
7/1/2020 - PDF - German -
Learn More€59.63 -
ASTM D3769-20 + Redline
Standard Test Method for Microcellular Urethanes—High-Temperature Sag
7/1/2020 - PDF - English -
Learn More€53.00 -
DIN EN 17333-2:2020-07
Characterisation of one component foam - Part 2: Expansion characteristics, German version EN 17333-2:2020 + AC:2020
7/1/2020 - PDF - German -
Learn More€85.79
