81 : Glass and ceramics industries
-
UNE-EN 673:2011
Glass in building - Determination of thermal transmittance (U value) - Calculation method
5/18/2011 - PDF - English -
Learn More€81.60 -
ISO 13124:2011 (R2021)
Fine ceramics (advanced ceramics, advanced technical ceramics)
Test method for interfacial bond strength of ceramic materials
5/5/2011 - Paper - English -
Learn More€110.00 -
DIN EN 15979:2011-04
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation, German version EN 15979:2011
4/1/2011 - PDF - German -
Learn More€79.72 -
NF EN 673, P78-460 (04/2011)
Glass in building - Determination of thermal transmittance (U value) - Calculation method - Verre dans la construction
4/1/2011 - Paper - French -
Learn More€30.33 -
NF EN 410, P78-457 (04/2011)
Glass in building - Determination of luminous and solar characteristics of glazing - Verre dans la construction
4/1/2011 - Paper - French -
Learn More€65.00 -
DIN EN 410:2011-04
Glass in building - Determination of luminous and solar characteristics of glazing
4/1/2011 - PDF - English -
Learn More€170.93 -
DIN EN 673:2011-04
Glass in building - Determination of thermal transmittance (U value) - Calculation method
4/1/2011 - PDF - English -
Learn More€91.12 -
DIN EN 15979:2011-04
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
4/1/2011 - PDF - English -
Learn More€99.44 -
DIN EN 410:2011-04
Glass in building - Determination of luminous and solar characteristics of glazing, German version EN 410:2011
4/1/2011 - PDF - German -
Learn More€136.82 -
DIN EN 673:2011-04
Glass in building - Determination of thermal transmittance (U value) - Calculation method, German version EN 673:2011
4/1/2011 - PDF - German -
Learn More€72.80 -
NBN EN 673:2011
Glass in building - Determination of thermal transmittance (U value) - Calculation method
3/23/2011 - PDF - French -
Learn More€89.00 -
NBN EN 410:2011
Glass in building - Determination of luminous and solar characteristics of glazing
3/23/2011 - PDF - English -
Learn More€184.00 -
NBN EN 410:2011
Glass in building - Determination of luminous and solar characteristics of glazing
3/23/2011 - PDF - French -
Learn More€184.00 -
NBN EN 673:2011
Glass in building - Determination of thermal transmittance (U value) - Calculation method
3/23/2011 - PDF - German -
Learn More€89.00 -
NBN EN 410:2011
Glass in building - Determination of luminous and solar characteristics of glazing
3/23/2011 - PDF - German -
Learn More€184.00 -
NBN EN 673:2011
Glass in building - Determination of thermal transmittance (U value) - Calculation method
3/23/2011 - PDF - English -
Learn More€89.00 -
UNE-EN 15979:2011 (R2020)
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation (Endorsed by AENOR in March of 2011.)
3/1/2011 - PDF - English -
Learn More€68.00 -
BS EN 15979:2011
Testing of ceramic raw and basic materials. Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
2/28/2011 - PDF - English -
Learn More€250.00 -
BS ISO 10676:2010
Fine ceramics (advanced ceramics, advanced technical ceramics). Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
2/28/2011 - PDF - English -
Learn More€180.00 -
NBN EN 15979:2011
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
2/23/2011 - PDF - English -
Learn More€121.00 -
NBN EN 15979:2011
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
2/23/2011 - PDF - French -
Learn More€121.00 -
NBN EN 15979:2011
Testing of ceramic raw and basic materials - Direct determination of mass fractions of impurities in powders and granules of silicon carbide by OES by DC arc excitation
2/23/2011 - PDF - German -
Learn More€121.00 -
ASTM C1651-11(2018)
Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
1/1/2011 - PDF - English -
Learn More€51.00 -
ASTM C866-11(2022) + Redline
Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
1/1/2011 - PDF - English -
Learn More€53.00 -
ASTM C729-11(2022) + Redline
Standard Test Method for Density of Glass by the Sink-Float Comparator
1/1/2011 - PDF - English -
Learn More€61.00 -
ASTM C181-11(2018)
Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
1/1/2011 - PDF - English -
Learn More€46.00 -
ASTM C1651-11(2018) + Redline
Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
1/1/2011 - PDF - English -
Learn More€61.00 -
ASTM C866-11(2022)
Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
1/1/2011 - PDF - English -
Learn More€46.00 -
ASTM C181-11(2018) + Redline
Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
1/1/2011 - PDF - English -
Learn More€53.00 -
ASTM C729-11(2022)
Standard Test Method for Density of Glass by the Sink-Float Comparator
1/1/2011 - PDF - English -
Learn More€51.00 -
€0.00
-
ISO 10676:2010 (R2021)
Fine ceramics (advanced ceramics, advanced technical ceramics)
Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
12/1/2010 - Paper - English -
Learn More€72.00 -
DIN EN 1007-7:2010-12
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature, German version EN 1007-7:2010
12/1/2010 - PDF - German -
Learn More€85.79 -
DIN EN 15365:2010-12
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method, German version EN 15365:2010
12/1/2010 - PDF - German -
Learn More€72.80 -
€0.00
-
ISO 10676:2010 (R2021)
Fine ceramics (advanced ceramics, advanced technical ceramics)
Test method for water purification performance of semiconducting photocatalytic materials by measurement of forming ability of active oxygen
12/1/2010 - Paper - French -
Learn More€72.00 -
DIN EN 1007-7:2010-12
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
12/1/2010 - PDF - English -
Learn More€107.48 -
DIN EN 15365:2010-12
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
12/1/2010 - PDF - English -
Learn More€91.12 -
ISO 28278-2:2010 (R2019)
Glass in building
Glass products for structural sealant glazing
11/30/2010 - Paper - English -
Learn More€174.00 -
DIN CEN/TS 843-9*DIN SPEC 1158:2010-11
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance, German version CEN/TS 843-9:2010
11/1/2010 - PDF - German -
Learn More€47.66 -
DIN EN 843-8:2010-11
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
11/1/2010 - PDF - English -
Learn More€74.58 -
DIN EN 843-7:2010-11
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
11/1/2010 - PDF - English -
Learn More€74.58 -
DIN EN 843-8:2010-11
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests, German version EN 843-8:2010
11/1/2010 - PDF - German -
Learn More€59.63 -
NF EN 1007-7, T25-715-7 (11/2010)
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7 : determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature - Céramiques techniques avancées
11/1/2010 - Paper - French -
Learn More€73.00 -
DIN EN 843-7:2010-11
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests, German version EN 843-7:2010
11/1/2010 - PDF - German -
Learn More€59.63 -
BS ISO 10678:2010
Fine ceramics (advanced ceramics, advanced technical ceramics). Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
10/31/2010 - PDF - English -
Learn More€180.00 -
UNE-EN ISO 8894-1:2010
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
10/13/2010 - PDF - Spanish -
Learn More€69.00 -
UNE-EN ISO 8894-1:2010
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
10/13/2010 - PDF - English -
Learn More€82.80 -
DIN EN ISO 8894-1:2010-10
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
10/1/2010 - PDF - English -
Learn More€99.44 -
NF EN 843-8, B41-206-8 (10/2010)
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8 : guidelines for conducting proof tests - Céramiques techniques avancées
10/1/2010 - Paper - French -
Learn More€46.55 -
NF EN 843-7, B41-206-7 (10/2010)
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7 : C-ring tests - Céramiques techniques avancées
10/1/2010 - Paper - French -
Learn More€58.50 -
DIN EN ISO 8894-1:2010-10
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010), German version EN ISO 8894-1:2010
10/1/2010 - PDF - German -
Learn More€79.72 -
DD CEN/TS 843-9:2010
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Method test for edge-chip resistance
9/30/2010 - PDF - English -
Learn More€180.00 -
BS EN ISO 20565-3:2008
Chemical analysis of chrome-bearing refractory products and raw materials (alternative to the X-ray fluorescence method) Flame atomic absorption spectrometry (FAAS) inductively coupled plasma emission (ICP-AES)
9/30/2010 - PDF - English -
Learn More€180.00 -
BS EN ISO 20565-1:2008
Chemical analysis of chrome-bearing refractory products and raw materials (alternative to the X-ray fluorescence method) Apparatus, reagents, dissolution determination gravimetric silica
9/30/2010 - PDF - English -
Learn More€250.00 -
BS EN ISO 20565-2:2008
Chemical analysis of chrome-bearing refractory products and raw materials (alternative to the X-ray fluorescence method) Wet chemical
9/30/2010 - PDF - English -
Learn More€293.00 -
JIS R 1613:2010 (R2015)
Testing method for wear resistance of fine ceramics by ball-on-disc method
9/21/2010 - PDF - Japanese -
Learn More€25.00 -
€25.00
-
€25.00
-
JIS R 1611:2010 (R2015)
Measurement methods of thermal diffusivity, specific heat capacity, and thermal conductivity for fine ceramics by flash method
9/21/2010 - PDF - Japanese -
Learn More€56.26 -
€25.00
-
JIS R 1617:2010 (R2015)
Testing method for fracture toughness of fine ceramics at elevated temperature
9/21/2010 - PDF - Japanese -
Learn More€36.27 -
ISO 10678:2010 (R2017)
Fine ceramics (advanced ceramics, advanced technical ceramics)
Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
9/10/2010 - Paper - French -
Learn More€72.00 -
ISO 10678:2010 (R2017)
Fine ceramics (advanced ceramics, advanced technical ceramics)
Determination of photocatalytic activity of surfaces in an aqueous medium by degradation of methylene blue
9/10/2010 - Paper - English -
Learn More€72.00 -
BS EN 1007-7:2010
Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination the distribution tensile strength and strain to failure filaments within a multifilament tow at high temperature
8/31/2010 - PDF - English -
Learn More€250.00 -
BS EN 15365:2010
Advanced technical ceramics. Mechanical properties of ceramic fibres at high temperature in a non-reactive environment. Determination of creep behaviour by the cold end method
8/31/2010 - PDF - English -
Learn More€180.00 -
NBN EN 1007-7:2010
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
8/27/2010 - PDF - German -
Learn More€121.00 -
NBN EN 15365:2010
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
8/27/2010 - PDF - English -
Learn More€89.00 -
NBN EN 15365:2010
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
8/27/2010 - PDF - French -
Learn More€89.00 -
NBN EN 1007-7:2010
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
8/27/2010 - PDF - English -
Learn More€121.00 -
NBN EN 1007-7:2010
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
8/27/2010 - PDF - French -
Learn More€121.00 -
NBN EN 15365:2010
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method
8/27/2010 - PDF - German -
Learn More€89.00 -
€0.00
-
UNE-EN 1007-7:2010 (R2021)
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English -
Learn More€70.00 -
CEN/TS 843-9:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance
8/1/2010 - PDF - German -
Learn More€58.00 -
UNE-EN 843-7:2010 (R2020)
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English -
Learn More€58.00 -
UNE-EN 15365:2010 (R2020)
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English -
Learn More€63.00 -
CEN/TS 843-9:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance
8/1/2010 - PDF - English -
Learn More€58.00 -
UNE-EN 843-8:2010 (R2020)
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests (Endorsed by AENOR in August of 2010.)
8/1/2010 - PDF - English -
Learn More€58.00 -
NF EN ISO 8894-1, B40-335-1 (08/2010)
Refractory materials - Determination of thermal conductivity - Part 1 : hot-wire methods (cross-array and resistance thermometer) - Matériaux réfractaires
8/1/2010 - Paper - French -
Learn More€75.67 -
CEN/TS 843-9:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 9: Method of test for edge-chip resistance
8/1/2010 - PDF - French -
Learn More€58.00 -
BS EN 843-7:2010
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature C-ring tests
7/31/2010 - PDF - English -
Learn More€180.00 -
BS EN 843-8:2010
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Guidelines for conducting proof tests
7/31/2010 - PDF - English -
Learn More€180.00 -
NBN EN 843-8:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
7/30/2010 - PDF - English -
Learn More€58.00 -
NBN EN 843-8:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
7/30/2010 - PDF - French -
Learn More€58.00 -
NBN EN 843-7:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
7/30/2010 - PDF - English -
Learn More€58.00 -
NBN EN 843-7:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
7/30/2010 - PDF - French -
Learn More€58.00 -
NBN EN 843-8:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests
7/30/2010 - PDF - German -
Learn More€58.00 -
NBN EN 843-7:2010
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests
7/30/2010 - PDF - German -
Learn More€58.00 -
€174.00
-
€148.00
-
FD ISO/TR 21828, B40-674 (07/2010)
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
7/1/2010 - Paper - French -
Learn More€99.00 -
DIN EN 13035-4:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (includes Amendment A1:2009)
7/1/2010 - PDF - English -
Learn More€107.48 -
DIN EN 13035-11:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (includes Amendment A1:2010)
7/1/2010 - PDF - English -
Learn More€99.44 -
DIN EN 1071-13:2010-07
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method, German version EN 1071-13:2010
7/1/2010 - PDF - German -
Learn More€85.79 -
DIN EN 13035-7:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (includes Amendment A1:2009)
7/1/2010 - PDF - English -
Learn More€99.44 -
DIN EN 13035-6:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out, German version EN 13035-6:2006+A1:2009
7/1/2010 - PDF - German -
Learn More€79.72 -
DIN EN 13035-9:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (includes Amendment A1:2010)
7/1/2010 - PDF - English -
Learn More€99.44 -
DIN EN 1071-12:2010-07
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test, German version EN 1071-12:2010
7/1/2010 - PDF - German -
Learn More€92.62 -
DIN EN 13035-3 Berichtigung 1:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines, German version EN 13035-3:2003+A1:2009, Corrigendum to DIN EN 13035-3:2010-02, German version EN 13035-3:2003+A1:2009/AC:2010
7/1/2010 - PDF - German -
Learn More€0.00 -
DIN EN 13035-5:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking, German version EN 13035-5:2006+A1:2009
7/1/2010 - PDF - German -
Learn More€92.62 -
NF EN 1279-5/IN2, P78-475/IN2 (07/2010)
Glass in building - Insulating glass units - Part 5 : evaluation of conformity - Verre dans la construction
7/1/2010 - Paper - French -
Learn More€23.00 -
DIN EN 1071-13:2010-07
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
7/1/2010 - PDF - English -
Learn More€107.48 -
DIN EN 13035-4:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables, German version EN 13035-4:2003+A1:2009
7/1/2010 - PDF - German -
Learn More€85.79 -
DIN EN 13035-6:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (includes Amendment A1:2009)
7/1/2010 - PDF - English -
Learn More€99.44 -
DIN EN 13035-11:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines, German version EN 13035-11:2006+A1:2010
7/1/2010 - PDF - German -
Learn More€79.72 -
DIN EN 1071-12:2010-07
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
7/1/2010 - PDF - English -
Learn More€115.98 -
DIN EN 13035-7:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass, German version EN 13035-7:2006+A1:2009
7/1/2010 - PDF - German -
Learn More€79.72 -
DIN EN 13035-3 Berichtigung 1:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines, Corrigendum 1 to English translation of DIN EN 13035-3:2010-02
7/1/2010 - PDF - English -
Learn More€0.00 -
DIN EN 13035-5:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (includes Amendment A1:2009)
7/1/2010 - PDF - English -
Learn More€115.98 -
DIN EN 13035-9:2010-07
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations, German version EN 13035-9:2006+A1:2010
7/1/2010 - PDF - German -
Learn More€79.72 -
BS EN ISO 8894-1:2010
Refractory materials. Determination of thermal conductivity Hot-wire methods (cross-array and resistance thermometer)
6/30/2010 - PDF - English -
Learn More€250.00 -
BS EN 1071-13:2010
Advanced technical ceramics. Methods of test for ceramic coatings Determination wear rate by the pin-on-disk method
6/30/2010 - PDF - English -
Learn More€250.00 -
BS EN 1071-12:2010
Advanced technical ceramics. Methods of test for ceramic coatings Reciprocating wear
6/30/2010 - PDF - English -
Learn More€250.00 -
BS EN 13042-5:2003+A1:2009
Machines and plants for the manufacture, treatment processing of hollow glass. Safety requirements Presses
6/30/2010 - PDF - English -
Learn More€250.00 -
BS EN 13035-3:2003+A1:2009
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements Cutting machines
6/30/2010 - PDF - English -
Learn More€250.00 -
NBN EN ISO 8894-1:2010
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
6/11/2010 - PDF - English -
Learn More€121.00 -
NBN EN ISO 8894-1:2010
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
6/11/2010 - PDF - French -
Learn More€121.00 -
NBN EN ISO 8894-1:2010
Refractory materials - Determination of thermal conductivity - Part 1: Hot-wire methods (cross-array and resistance thermometer) (ISO 8894-1:2010)
6/11/2010 - PDF - German -
Learn More€121.00 -
ISO/TR 21828:2010
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
General information
6/4/2010 - Paper - English -
Learn More€174.00 -
ISO/TR 21828:2010
Guidance on standards available for preparation and testing of monolithic, unshaped refractory products
General information
6/4/2010 - Paper - French -
Learn More€174.00 -
NBN EN 1071-13:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
5/19/2010 - PDF - German -
Learn More€121.00 -
NBN EN 1071-12:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
5/19/2010 - PDF - German -
Learn More€142.00 -
NBN EN 1071-13:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
5/19/2010 - PDF - English -
Learn More€121.00 -
NBN EN 1071-13:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method
5/19/2010 - PDF - French -
Learn More€121.00 -
NBN EN 1071-12:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
5/19/2010 - PDF - English -
Learn More€142.00 -
NBN EN 1071-12:2010
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test
5/19/2010 - PDF - French -
Learn More€142.00 -
NF EN 13035-11+A1, E58-910-11 (05/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11 : drilling machines - Machines et installations pour la production, le façonnage et la transformation du verre plat
5/1/2010 - Paper - French -
Learn More€75.67 -
UNE-EN 1071-13:2010 (R2020)
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13: Determination of wear rate by the pin-on-disk method (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English -
Learn More€68.00 -
NF EN 1071-12, A92-801-12 (05/2010)
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12 : reciprocating wear test - Céramiques techniques avancées
5/1/2010 - Paper - French -
Learn More€86.50 -
DIN EN 13367:2010-05
Ceramic machines - Safety - Transfer platforms and cars, German version EN 13367:2005+A1:2008+AC:2009
5/1/2010 - PDF - German -
Learn More€99.35 -
NF EN 13035-9+A1, E58-910-9 (05/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9 : Washing installations - Machines et installations pour la production, le façonnage et la transformation du verre plat
5/1/2010 - Paper - French -
Learn More€75.67 -
DIN EN 13042-3:2010-05
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines, German version EN 13042-3:2007+A1:2009
5/1/2010 - PDF - German -
Learn More€79.72 -
DIN EN 13367:2010-05
Ceramic machines - Safety - Transfer platforms and cars (includes Amendment A1:2008 + Corrigendum AC:2009)
5/1/2010 - PDF - English -
Learn More€124.21 -
UNE-EN 1071-12:2010 (R2020)
Advanced technical ceramics - Methods of test for ceramic coatings - Part 12: Reciprocating wear test (Endorsed by AENOR in May of 2010.)
5/1/2010 - PDF - English -
Learn More€71.00 -
NF EN 1071-13, A92-801-13 (05/2010)
Advanced technical ceramics - Methods of test for ceramic coatings - Part 13 : determination of wear rate by the pin-on-disk method - Céramiques techniques avancées
5/1/2010 - Paper - French -
Learn More€75.50 -
DIN EN 13042-3:2010-05
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 3: IS machines (includes Amendment A1:2009)
5/1/2010 - PDF - English -
Learn More€99.44 -
BS EN 13042-1:2007+A1:2009
Machines and plants for the manufacture, treatment processing of hollow glass. Safety requirements Gob feeder
4/30/2010 - PDF - English -
Learn More€180.00 -
BS EN 12600:2002
Glass in building. Pendulum test. Impact test method and classification for flat glass
4/30/2010 - PDF - English -
Learn More€293.00 -
BS EN 13035-9:2006+A1:2010
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements Washing installations
4/30/2010 - PDF - English -
Learn More€250.00 -
BS EN 1007-5:2010
Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements Determination distribution tensile strength and strain to failure filaments within a multifilament tow at ambient temperature
4/30/2010 - PDF - English -
Learn More€180.00 -
BS EN 13035-11:2006+A1:2010
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements Drilling machines
4/30/2010 - PDF - English -
Learn More€180.00 -
€250.00
-
€148.00
-
€148.00
-
€0.00
-
€0.00
-
NBN EN 13035-11+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
4/16/2010 - PDF - German -
Learn More€121.00 -
NBN EN 13035-9+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
4/16/2010 - PDF - German -
Learn More€121.00 -
NBN EN 13035-11+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
4/16/2010 - PDF - English -
Learn More€121.00 -
NBN EN 13035-11+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines
4/16/2010 - PDF - French -
Learn More€121.00 -
NBN EN 13035-9+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
4/16/2010 - PDF - English -
Learn More€121.00 -
NBN EN 13035-9+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations
4/16/2010 - PDF - French -
Learn More€121.00 -
DIN EN 13042-1:2010-04
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder, German version EN 13042-1:2007+A1:2009
4/1/2010 - PDF - German -
Learn More€72.80 -
UNE-EN 13035-11:2006+A1:2010 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 11: Drilling machines (Endorsed by AENOR in April of 2010.)
4/1/2010 - PDF - English -
Learn More€65.00 -
DIN EN 13042-1:2010-04
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder (includes Amendment A1:2009)
4/1/2010 - PDF - English -
Learn More€91.12 -
UNE-EN 13035-9:2006+A1:2010 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 9: Washing installations (Endorsed by AENOR in April of 2010.)
4/1/2010 - PDF - English -
Learn More€66.00 -
JIS R 3258:2010 (R2014)
Methods for determination of cadmium, chromium and lead in glasses
3/23/2010 - PDF - Japanese -
Learn More€25.00 -
€36.27
-
JIS R 1688:2010 (R2014)
Methods for chemical analysis of magnesium oxide powders for fine ceramics
3/23/2010 - PDF - Japanese -
Learn More€36.27 -
DIN 52295:2010-03
Testing of glass - Pendulum impact test on containers - Testing by attributes and by variables
3/1/2010 - PDF - German -
Learn More€45.98 -
BS EN 13035-4:2003+A1:2009
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements Tilting tables
2/28/2010 - PDF - English -
Learn More€250.00 -
BS EN 13035-5:2006+A1:2009
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements installations stacking de-stacking
2/28/2010 - PDF - English -
Learn More€250.00 -
BS EN 13035-6:2006+A1:2009
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements break-out
2/28/2010 - PDF - English -
Learn More€180.00 -
NBN EN 13035-5+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
2/19/2010 - PDF - French -
Learn More€37.00 -
NBN EN 13035-4+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
2/19/2010 - PDF - English -
Learn More€121.00 -
NBN EN 13035-7+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
2/19/2010 - PDF - German -
Learn More€89.00 -
NBN EN 13035-6+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
2/19/2010 - PDF - German -
Learn More€89.00 -
NBN EN 13035-4+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
2/19/2010 - PDF - French -
Learn More€121.00 -
NBN EN 13035-5+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
2/19/2010 - PDF - German -
Learn More€37.00 -
NBN EN 13035-7+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
2/19/2010 - PDF - English -
Learn More€89.00 -
NBN EN 13035-6+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
2/19/2010 - PDF - English -
Learn More€89.00 -
NBN EN 13035-4+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables
2/19/2010 - PDF - German -
Learn More€121.00 -
NBN EN 13035-7+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass
2/19/2010 - PDF - French -
Learn More€89.00 -
NBN EN 13035-6+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out
2/19/2010 - PDF - French -
Learn More€89.00 -
NBN EN 13035-5+A1:2010
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking
2/19/2010 - PDF - English -
Learn More€37.00 -
UNE-EN 13035-5:2006+A1:2009 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5: Machines and installations for stacking and de-stacking (Endorsed by AENOR in February of 2010.)
2/1/2010 - PDF - English -
Learn More€70.00 -
DIN EN 14232:2010-02
Advanced technical ceramics - Terms, definitions and abbreviations, Trilingual version EN 14232:2009
2/1/2010 - PDF - English, French, German -
Learn More€179.72 -
NF EN 13035-4/IN1, E58-910-4/IN1 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4 : tilting tables - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€23.00 -
NF EN 13035-4+A1, E58-910-4 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4 : tilting tables - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€75.67 -
DIN EN 13035-3:2010-02
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines, German version EN 13035-3:2003+A1:2009
2/1/2010 - PDF - German -
Learn More€99.35 -
NF EN 13035-6/IN1, E58-910-6/IN1 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6 : machines for break-out - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€23.00 -
XP CEN/TS 15880, B43-400 (02/2010)
Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by the single fibre push-out method - Céramiques techniques avancées
2/1/2010 - Paper - French -
Learn More€60.67 -
UNE-EN 13035-6:2006+A1:2009 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6: Machines for break-out (Endorsed by AENOR in February of 2010.)
2/1/2010 - PDF - English -
Learn More€64.00 -
NF EN 13035-5+A1, E58-910-5 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5 : machines and installations for stacking and de-stacking - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€86.67 -
UNE-EN 13035-4:2003+A1:2009 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 4: Tilting tables (Endorsed by AENOR in February of 2010.)
2/1/2010 - PDF - English -
Learn More€68.00 -
DIN EN 13035-3:2010-02
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 3: Cutting machines (includes Amendment A1:2009)
2/1/2010 - PDF - English -
Learn More€124.21 -
NF EN 13035-5/IN1, E58-910-5/IN1 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 5 : machines and installations for stacking and de-stacking - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€23.00 -
NF EN 13035-6+A1, E58-910-6 (02/2010)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 6 : machines for break-out - Machines et installations pour la production, le façonnage et la transformation du verre plat
2/1/2010 - Paper - French -
Learn More€75.67 -
XP CEN/TS 15881, B43-401 (02/2010)
Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites - Céramiques techniques avancées
2/1/2010 - Paper - French -
Learn More€75.67 -
BS EN 13035-7:2006+A1:2009
Machines and plants for the manufacture, treatment processing of flat glass. Safety requirements Cutting machines laminated glass
1/31/2010 - PDF - English -
Learn More€180.00 -
BS EN 843-6:2009
Advanced technical ceramics. Mechanical properties of monolithic ceramics at room temperature Guidance for fractographic investigation
1/31/2010 - PDF - English -
Learn More€331.00 -
NBN EN 13042-1+A1:2010
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
1/22/2010 - PDF - French -
Learn More€89.00 -
NBN EN 13042-1+A1:2010
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
1/22/2010 - PDF - German -
Learn More€89.00 -
NBN EN 13042-1+A1:2010
Machines and plants for the manufacture, treatment and processing of hollow glass - Safety requirements - Part 1: Gob feeder
1/22/2010 - PDF - English -
Learn More€89.00 -
ASTM C1606-10(2023) + Redline
Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
1/1/2010 - PDF - English -
Learn More€57.00 -
ASTM C872-10(2021) + Redline
Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces
1/1/2010 - PDF - English -
Learn More€53.00 -
ASTM C1361-10(2019)
Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
1/1/2010 - PDF - English -
Learn More€51.00 -
UNE-EN 13035-7:2006+A1:2009 (R2021)
Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements - Part 7: Cutting machines for laminated glass (Endorsed by AENOR in January of 2010.)
1/1/2010 - PDF - English -
Learn More€63.00 -
ASTM C1683-10(2019)
Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
1/1/2010 - PDF - English -
Learn More€57.00