77 : Metallurgy
-
NF A36-800-3/A1 (09/2023)
Tôles en acier soudable laminées à chaud pour blindage - Partie 3 : caractéristiques des munitions et vitesses limites de protection - Amendement 1
9/1/2023 - Paper - French - AFNOR
Learn More€75.50 -
UNE-CEN ISO/ASTM TR 52905:2023
Additive manufacturing of metals - Non-destructive testing and evaluation - Defect detection in parts (ISO/ASTM TR 52905:2023) (Endorsed by Asociación Española de Normalización in August of 2023.)
8/2/2023 - PDF - English - AENOR
Learn More€174.00 -
VdTÜV WB 432/3 Supplement:2023-06
Hochkorrosionsbeständige Nickelbasislegierung NiCr21Mo, Werkstoff-Nr. 2.4858, Hersteller: Schmiedestück, Stabstahl
6/20/2023 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 305 Supplement:2023-05
Nickel-Chrom-Eisen-Legierung NiCr15Fe, Werkstoff-Nr. 2.4816 Hersteller: Band, Blech, nahtloses Rohr, Schmiedestück, Stange
5/2/2023 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 434 Supplement:2023-03
X10CrNiAlTi 32-20 H mit erhöhten Zeitstandfestigkeitseigenschaften Werkstoff-Nr. 1.4876 Hersteller: Blech, Band, Stabstahl, Schmiedestück, nahtloses Rohr
3/24/2023 - PDF - German - VDTUV
Learn More€25.00 -
DIN EN ISO 7500-1 Beiblatt 3:2023-03
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 3: General information for requirements, verification and calibration of fatigue testing machines
3/1/2023 - PDF - German - DIN
Learn More€59.63 -
NF A50-800-2/A1 (12/2022)
Tôles en alliage d'aluminium soudable laminées à chaud pour blindage - Partie 2 : Méthode d'essais de tir
12/1/2022 - Paper - French - AFNOR
Learn More€60.67 -
NF A35-080-1/A2 (10/2022)
Aciers pour béton armé - Aciers soudables - Partie 1 : Barres et couronnes
10/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
VdTÜV WB 499 Supplement:2022-06
Hochkorrosionsbeständige Nickelbasis-Legierung NiCr22Mo9Nb, Werkstoff-Nr. 2.4856 Hersteller: Band, Blech, Formstahl, nahtloses Rohr, Stab und Schmiedestück
6/20/2022 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 432/1 Supplement:2022-06
Hochkorrosionsbeständige Nickelbasis-Legierung NiCr21Mo, Werkstoff-Nr. 2.4858 Hersteller: Band, Blech
6/7/2022 - PDF - German - VDTUV
Learn More€25.00 -
DIN EN ISO 7500-1 Beiblatt 1:2022-06
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 1: General for requirements, calibration and verification of tension, compression and flexion testing machines
6/1/2022 - PDF - German - DIN
Learn More€52.90 -
DIN EN ISO 7500-1 Beiblatt 2:2022-06
Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and calibration of spring testing machines
6/1/2022 - PDF - German - DIN
Learn More€39.35 -
VdTÜV WB 400 Supplement:2022-05
Hochkorrosionsbeständige Legierung NiMo16Cr15W, Werkstoff-Nr. 2.4819 Hersteller: Blech, Band, Schmiedestück, Stange, Rohr, Ring
5/20/2022 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 263 Supplement:2022-03
Nickel-Copper-Alloy NiCu30Fe - Material-No. 2.4360, Manufacturer: strip, plate, seamless tube, forging, rod
3/16/2022 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 263 Supplement:2022-03
Nickel-Copper-Alloy NiCu30Fe, Material-No. 2.4360 Manufacturer: strip, plate, seamless tube, forging, rod
3/16/2022 - PDF - English - VDTUV
Learn More€25.00 -
VdTÜV WB 337 Supplement:2022-03
Warmfester Stahl 20 NiCrMo 14 5 I und 20 NiCrMo 14 5 II für Schrauben und Muttern, Werkstoff-Nr. 1.6772
3/15/2022 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 357/3 Supplement:2022-03
Schweißgeeigneter Feinkornbaustahl mit einer Mindeststreckgrenze von 460 MPa Hersteller: Flansch, Ring, Hohlkörper, Schmiedestück, Stabstahl
3/14/2022 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 479 Supplement:2022-03
Hochkorrosionsbeständige Legierung NiCr21Mo14W, Werkstoff-Nr. 2.4602 Hersteller: Blech, Band, Schmiedestück, Flansch, Stange und Rohr
3/10/2022 - PDF - German - VDTUV
Learn More€25.00 -
NF A35-026/A1 (01/2022)
Aciers pour béton armé - Aciers plats crantés soudables - Barres et couronnes
1/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
NF A35-015/A1 (01/2022)
Aciers pour béton armé - Aciers soudables lisses - Barres et couronnes
1/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
NF A35-024/A1 (01/2022)
Aciers pour béton armé - Treillis soudés de surface constitués de fils de diamètre nominal inférieur à 5 mm
1/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
NF A35-080-1/A1 (01/2022)
Aciers pour béton armé - Aciers soudables - Partie 1 : barres et couronnes
1/1/2022 - Paper - French - AFNOR
Learn More€25.50 -
VdTÜV WB 354/2 Supplement:2021-12
Schweißgeeignete Feinkornbaustähle mit einer Mindeststreckgrenze von 355 MPa Hersteller: Nahtloser Hohlkörper, nahtloses Rohr, nahtloser Sammler
12/6/2021 - PDF - German - VDTUV
Learn More€25.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-9:2011/A1:2021
Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1: Change acceptance criteria (ISO 10893-9:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-10:2011/A1:2021
Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-10:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-11:2011/A1:2021
Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of ultrasonic test frequency, change of acceptance criteria (ISO 10893-11:2011/Amd 1:2020)
5/19/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-1:2011/A1:2021
Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-1:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-2:2011/A1:2021
Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change of dimensions of the reference notch, change acceptance criteria (ISO 10893-2:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A2:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 2: Change acceptance criteria (ISO 10893-3:2011/Amd 2:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-8:2011/A1:2021
Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO 10893-8:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-12:2011/A1:2021
Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria (ISO 10893-12:2011/Amd 1:2020)
3/31/2021 - PDF - English - AENOR
Learn More€40.80 -
VdTÜV WB 356/1 Supplement:2021-03
Schweißgeeignete Feinkornbaustähle mit einer Mindeststreckgrenze von 420 MPa Hersteller: Blech, Band, Breitflachstahl, Form- und Stabstahl
3/3/2021 - PDF - German - VDTUV
Learn More€25.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - Spanish - AENOR
Learn More€34.00 -
UNE-EN ISO 10893-3:2011/A1:2021
Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1: Change of dimensions of the reference notch (ISO 10893-3:2011/Amd 1:2019)
2/17/2021 - PDF - English - AENOR
Learn More€40.80 -
NF A08-821/A1 (10/2020)
Non-alloy carbon ferrous scrap categories and related specifications
10/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
VdTÜV WB 352/1 Supplement:2020-09
Schweißgeeignete Feinkornbaustähle mit einer Mindeststreckgrenze von 275 MPa, Hersteller: Band, Blech, Breitfachstahl, Form- und Stabstahl
9/22/2020 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 354/1 Supplement:2020-09
Weldable fine grain steels with a minimum yield strength of 355 MPa, Manufacturer: steel plate, metal strips, wide flats, Steel sections, steel bars
9/15/2020 - PDF - German - VDTUV
Learn More€28.80 -
UNE-EN ISO 11961:2018/A1:2020
Petroleum and natural gas industries - Steel drill pipe - Amendment 1 (ISO 11961:2018/Amd 1:2020) (Endorsed by Asociación Española de Normalización in August of 2020.)
8/1/2020 - PDF - English - AENOR
Learn More€46.00 -
NF EN ISO 10893-11/A1, A49-785-11/A1 (07/2020)
Non-destructive testing of steel tubes - Part 11 : automated ultrasonic testing of weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency, change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 11 : Contrôle automatisé par ultrasons du cordon de soudure des tubes en acier soudés pour la détection des imperfections longitudinales et/ou transversales - Amendement 1 : Modification de la fréquence ultrasonore d'essai des transducteurs -
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-10/A1, A49-785-10/A1 (07/2020)
Non-destructive testing of steel tubes - Part 10 : automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of ultrasonic test frequency - change of acceptance criteria - Essais non destructifs des tubes en acier - Partie 10 : Contrôle automatisé par ultrasons sur toute la circonférence des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales - AMENDEMENT 1 :
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-9/A1, A49-785-9/A1 (07/2020)
Non-destructive testing of steel tubes - Part 9 : Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 9 : Contrôle automatisé par ultrasons pour la détection des dédoublures dans les bandes/tôles utilisées pour la fabrication des tubes en acier soudés - Amendement 1 : Changement des critères d'acceptation
7/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-12/A1, A49-785-12/A1 (06/2020)
Non-destructive testing of steel tubes - Part 12 : automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1 : change of acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-1/A1, A49-785-1/A1 (06/2020)
Non-destructive testing of steel tubes - Part 1 : automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1 : change of dimensions of the reference notch , change acceptance criteria - Essais non destructifs des tubes en acier - Partie 1 : Contrôle automatisé électromagnétique pour vérification de l'étanchéité hydraulique des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-2/A1, A49-785-2/A1 (06/2020)
Non-destructive testing of steel tubes - Part 2 : automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1 : change of dimensions of the reference notch, change acceptance criteria - Essais non destructifs des tubes en acier - Partie 2 : Contrôle automatisé par courants de Foucault pour la détection des imperfections des tubes en acier sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) - Amendement 1 : Changement de dimensions de l'entaille de référence,
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-8/A1, A49-785-8/A1 (06/2020)
Non-destructive testing of steel tubes - Part 8 : automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1 : change acceptance criteria
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
NF EN ISO 10893-3/A2, A49-785-3/A2 (06/2020)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transversal imperfections - Amendment 2 : change acceptance criteria - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
6/1/2020 - Paper - French - AFNOR
Learn More€25.67 -
UNE-CEN/TS 13388:2020
Copper and copper alloys - Compendium of compositions and products (Endorsed by Asociación Española de Normalización in May of 2020.)
5/1/2020 - PDF - English - AENOR
Learn More€100.00 -
NF EN ISO 10893-3/A1, A49-785-3/A1 (10/2019)
Non-destructive testing of steel tubes - Part 3 : automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1 : change of dimensions of the reference notch - Essais non destructifs des tubes en acier - Partie 3 : Contrôle automatisé par flux de fuite sur toute la circonférence des tubes en acier ferromagnétique sans soudure et soudés (sauf à l'arc immergé sous flux en poudre) pour la détection des imperfections longitudinales et/ou transversales -
10/1/2019 - Paper - French - AFNOR
Learn More€25.67 -
UNE 36060:2014/1M:2019
Steel welded fabric for structural use in concrete reinforcement. Steel welded fabric made out of steel bars B 500 SD.
6/12/2019 - PDF - Spanish - AENOR
Learn More€17.00 -
VdTÜV WB 395/3 Supplement:2018-03
Schweißgeeigneter martensitischer Walz- und Schmiedestahl X CrNi 13 4, Werkstoff-Nr. 1.4313 Hersteller: Form- und Stabstahl, Schmiedeerzeugnis
3/26/2018 - PDF - German - VDTUV
Learn More€25.00 -
SEW 520 Beiblatt:2017-12
Recommendations for construction welding of high-strength steel cast steel grades with good weldability according to SEW 520
12/1/2017 - - - STAHL
Learn More€56.25 -
SEW 520:2017-12
High-strength cast steel with good weldability - Technical delivery conditions
12/1/2017 - - - STAHL
Learn More€56.25 -
JIS G 1217/AMENDMENT 1:2017
Iron and steel - Methods for determination of chromium content (Amendment 1)
10/20/2017 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 1237/AMENDMENT 1:2017
Iron and steel - Methods for determination of niobium content (Amendment 1)
10/20/2017 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
JIS G 3468/AMENDMENT 1:2017
Large diameter welded stainless steel pipes (Amendment 1)
10/20/2017 - PDF - Japanese - JSA
Learn More€25.00 -
UNE-CEN/TR 17144:2017
Resistance of metallic materials to liquid biogenic and alternative fuels and their blends (Endorsed by Asociación Española de Normalización in October of 2017.)
10/1/2017 - PDF - English - AENOR
Learn More€65.00 -
VdTÜV WB 427/1 Supplement:2017-08
Feinkornbaustahl 15 MnNi 6 3, Werkstoff-Nr. 1.6210 Hesteller: Blech
8/31/2017 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 353/1 Supplement:2017-08
Schweißgeeignete Feinkornbaustähle mit einer Mindeststreckgrenze von 315 MPa Hersteller: Blech, Band, Breitflachstahl, Form- und Stabstahl
8/16/2017 - PDF - German - VDTUV
Learn More€25.00 -
JIS G 1211-4/AMENDMENT 2:2017
Iron and steel - Determination of carbon content - Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 2)
6/20/2017 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 3313/AMENDMENT 1:2017
Electrolytic zinc-coated steel sheet and strip (Amendment 1)
6/20/2017 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3314/AMENDMENT 2:2017
Hot-dip aluminium-coated steel sheet and strip (Amendment 2)
6/20/2017 - PDF - Japanese - JSA
Learn More€32.50 -
NF EN 60404-15/A1, C28-901-15/A1 (05/2017)
Magnetic materials - Part 15 : methods for the determination of the relative magnetic permeability of feebly magnetic materials
5/1/2017 - Paper - French - AFNOR
Learn More€54.67 -
JIS G 1216/AMENDMENT 1:2017
Iron and steel - Methods for determination of nickel content (Amendment 1)
3/21/2017 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 1258-0/AMENDMENT 2:2017
Iron and steel - ICP atomic emission spectrometric method - Part 0: General rules (Amendment 2)
3/21/2017 - PDF - Japanese - JSA
Learn More€25.00 -
€32.50
-
€32.50
-
JIS G 0320/AMENDMENT 2:2017
Standard test method for heat analysis of steel products (Amendment 2)
3/21/2017 - PDF - Japanese - JSA
Learn More€32.50 -
JIS H 4000/AMENDMENT 1:2017
Aluminium and aluminium alloy sheets, strips and plates (Amendment 1)
3/21/2017 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 3442/AMENDMENT 1:2016
Galvanized steel pipes for ordinary piping (Amendment 1)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3478/AMENDMENT 1:2016
Carbon steel tubes for general machine structural purposes (Amendment 1)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3479/AMENDMENT 1:2016
Steel tubes for machine structure with specified hardenability bands (Amendment 1)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
€32.50
-
JIS G 3456/AMENDMENT 1:2016
Carbon steel pipes for high temperature service (Amendment 1)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3462/AMENDMENT 1:2016
Alloy steel tubes for boiler and heat exchanger (Amendment 1)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3474/AMENDMENT 2:2016
High strength steel tubes for steel tower (Amendment 2)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3475/AMENDMENT 2:2016
Carbon steel tubes for building structure (Amendment 2)
11/21/2016 - PDF - Japanese - JSA
Learn More€32.50 -
VdTÜV WB 485 Supplement:2016-11
Hochwarmfeste Nickelbasislegierung NiCr 23 Co12 Mo, Werkstoff-Nr. 2.4663, Hersteller: Band, Blech, Stange, Schmiedestück, nahtloses Rohr
11/1/2016 - PDF - German - VDTUV
Learn More€25.00 -
JIS G 3466/AMENDMENT 1:2016
Carbon steel square and rectangular tubes for general structure (Amendment 1)
5/20/2016 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
€32.50
-
€32.50
-
JIS G 4304/AMENDMENT 1:2015
Hot-rolled stainless steel plate, sheet and strip (Amendment 1)
9/24/2015 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 4304:2012/AMENDMENT 1:2015
Hot-rolled stainless steel plate, sheet and strip (Amendment 1)
9/24/2015 - PDF - English - JSA
Learn More€16.00 -
JIS G 0582/AMENDMENT 1:2015
Automated ultrasonic examination of steel pipes and tubes (Amendment 1)
8/20/2015 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0555:2003/AMENDMENT 1:2015
Microscopic testing method for the non-metallic inclusions in steel (Amendment 1)
8/20/2015 - PDF - English - JSA
Learn More€16.00 -
JIS G 0320/AMENDMENT 1:2015
Standard test method for heat analysis of steel products (Amendment 1)
3/20/2015 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
VdTÜV WB 382 Supplement:2014-12
Tantalum, unalloyed - Manufacturer: Sheet, seamless tube, rod
12/1/2014 - PDF - German - VDTUV
Learn More€25.00 -
DIN 50929-3 Beiblatt 1:2014-11
Corrosion of metals - Probability of corrosion of metallic materials when subject to corrosion from the outside - Part 3: Buried and underwater pipelines and structural components, Supplement 1: Corrosion rates of structural components in water
11/1/2014 - PDF - German - DIN
Learn More€52.90 -
€32.50
-
€25.00
-
€32.50
-
JIS G 1258-0/AMENDMENT 1:2014
Iron and steel - ICP atomic emission spectrometric method - Part 0: General rules (Amendment 1)
2/20/2014 - PDF - Japanese - JSA
Learn More€25.00 -
DIN EN ISO 148-1 Beiblatt 1:2014-02
Metallic materials - Charpy pendulum impact test - Part 1: Test method, Supplement 1: Special test pieces
2/1/2014 - PDF - German - DIN
Learn More€32.34 -
DIN EN ISO 148-1 Beiblatt 1:2014-02
Metallic materials - Charpy pendulum impact test - Part 1: Test method, Supplement 1: Special test pieces
2/1/2014 - PDF - English - DIN
Learn More€40.56 -
€32.50
-
JIS B 2011/AMENDMENT 2:2013
Bronze, gate, globe, angle, and check valves (Amendment 2)
6/20/2013 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3312/AMENDMENT 1:2013
Prepainted hot-dip zinc-coated steel sheet and strip (Amendment 1)
6/20/2013 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3318/AMENDMENT 1:2013
Prepainted hot-dip zinc - 5% aluminium alloy-coated steel sheet and strip (Amendment 1)
6/20/2013 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3322/AMENDMENT 1:2013
Prepainted hot-dip 55% aluminium - zinc alloy-coated steel sheet and strip (Amendment 1)
6/20/2013 - PDF - Japanese - JSA
Learn More€32.50 -
JIS A 6205/AMENDMENT 1:2013
Corrosion inhibitor for reinforcing steel in concrete (Amendment 1)
5/20/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 1211-4/AMENDMENT 1:2013
Iron and steel - Determination of carbon content - Part 4: Infrared absorption method after combustion in a furnace with preheating or peak separating (Amendment 1)
3/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 1253/AMENDMENT 1:2013 (R2017)
Iron and steel - Method for spark discharge atomic emission spectrometric analysis (Amendment 1)
3/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 1256/AMENDMENT 2:2013 (R2017)
Iron and steel - Method for X-ray fluorescence spectrometric analysis (Amendment 2)
3/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 0578/AMENDMENT 1:2013 (R2017)
Method of ferric chloride tests for stainless steels (Amendment 1)
3/21/2013 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0590/AMENDMENT 1:2013 (R2017)
Method of critical pitting temperature measurement for stainless steels (Amendment 1)
3/21/2013 - PDF - Japanese - JSA
Learn More€32.50 -
DIN EN ISO 7500-1 Beiblatt 4:2013-03
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system, Supplement 4: Information for taking the uncertainty into account regarding the classification of material testing machines
3/1/2013 - PDF - German - DIN
Learn More€22.99 -
DIN EN ISO 7500-1 Beiblatt 4:2013-03
Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system, Supplement 4: Information for taking the uncertainty into account regarding the classification of material testing machines
3/1/2013 - PDF - English - DIN
Learn More€28.60 -
SEP 1664 Beiblatt:2013-03
Derivation of equations by multiple regression for the calculation of hardenability in the Jominy end quench test on the basis of the chemical composition of steels
3/1/2013 - PDF - English, German - STAHL
Learn More€189.25 -
JIS H 1062/AMENDMENT 1:2013 (R2017)
Methods for determination of zinc in copper and copper alloys (Amendment 1)
1/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS H 1060/AMENDMENT 1:2013 (R2017)
Methods for determination of cobalt in copper and copper alloys (Amendment 1)
1/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS H 1056/AMENDMENT 1:2013 (R2017)
Methods for determination of nickel in copper and copper alloys (Amendment 1)
1/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
JIS H 1052/AMENDMENT 1:2013 (R2017)
Methods for determination of tin in copper and copper alloys (Amendment 1)
1/21/2013 - PDF - Japanese - JSA
Learn More€25.00 -
UNE-CEN/TS 15916-1:2012 EX (R2020)
Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
6/6/2012 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-CEN/TS 15916-1:2012 EX (R2020)
Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
6/6/2012 - PDF - English - AENOR
Learn More€63.60 -
JIS G 0553/AMENDMENT 1:2012 (R2017)
Steel - Macroscopic examination by etching (Amendment 1)
4/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
€11.00
-
JIS H 1161/AMENDMENT 1:2012 (R2016)
Methods for chemical analysis of cadmium metal (Amendment 1)
3/21/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS H 1183/AMENDMENT 1:2012 (R2016)
Method for emission spectrochemical analysis of silver bullion (Amendment 1)
3/21/2012 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 0579/AMENDMENT 1:2012 (R2016)
Method of anodic polarization curves measurement for stainless steels (Amendment 1)
1/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0591/AMENDMENT 1:2012 (R2016)
Method of sulfuric acid test for stainless steels (Amendment 1)
1/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0573/AMENDMENT 1:2012 (R2016)
Method of 65 % nitric acid test for stainless steels (Amendment 1)
1/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0575/AMENDMENT 1:2012 (R2016)
Method of copper sulfate-sulfuric acid test for stainless steels (Amendment 1)
1/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 0576/AMENDMENT 1:2012 (R2016)
Stress corrosion cracking test in chloride solution for stainless steels (Amendment 1)
1/20/2012 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3314/AMENDMENT 1:2011
Hot-dip aluminium-coated steel sheet and strip (Amendment 1)
11/21/2011 - PDF - Japanese - JSA
Learn More€32.50 -
DIN 6935 Beiblatt 1:2011-10
Cold bending of flat rolled steel - Supplement 1: Factors determining the correction valuefor calculating length of flats prior to bending
10/1/2011 - PDF - German - DIN
Learn More€22.99 -
DIN 6935 Beiblatt 1:2011-10
Cold bending of flat rolled steel - Supplement 1: Factors determining the correction valuefor calculating length of flats prior to bending
10/1/2011 - PDF - English - DIN
Learn More€28.60 -
DIN 6935 Beiblatt 2:2011-10
Cold bending of flat steel products - Supplement 2: Calculated compensating values
10/1/2011 - PDF - German - DIN
Learn More€85.79 -
DIN 6935 Beiblatt 2:2011-10
Cold bending of flat steel products - Supplement 2: Calculated compensating values
10/1/2011 - PDF - English - DIN
Learn More€107.48 -
UNE-CEN/TS 15022-2:2011 EX (R2012)
Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method
7/20/2011 - PDF - Spanish - AENOR
Learn More€53.00 -
UNE-CEN/TS 15022-2:2011 EX (R2012)
Copper and copper alloys - Determination of tin content - Part 2: Spectrophotometric method
7/20/2011 - PDF - English - AENOR
Learn More€63.60 -
JIS B 2011/AMENDMENT 1:2011
Bronze, gate, globe, angle, and check valves (Amendment 1)
3/22/2011 - PDF - Japanese - JSA
Learn More€32.50 -
€25.00
-
€25.00
-
€25.00
-
€25.00
-
€25.00
-
JIS B 6911/AMENDMENT 1:2010 (R2015)
Process of normalizing and annealing of iron and steel (Amendment 1)
8/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS B 6912/AMENDMENT 1:2010 (R2015)
Process of induction hardening and tempering of iron and steel (Amendment 1)
8/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS B 6913/AMENDMENT 1:2010 (R2015)
Process of quenching and tempering of iron and steel (Amendment 1)
8/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS B 6914/AMENDMENT 1:2010 (R2015)
Process of carburizing and carbonitriding, quenching and tempering of iron and steel (Amendment 1)
8/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS B 6915/AMENDMENT 1:2010 (R2015)
Process of nitriding and nitrocarburizing of iron and steel (Amendment 1)
8/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 3251/AMENDMENT 2:2010 (R2015)
Carbon steel blooms and billets for forgings (Amendment 2)
8/20/2010 - PDF - Japanese - JSA
Learn More€32.50 -
SEP 1150 Beiblatt 2:2010-08
Shear Defect Catalogue A - Process-related Causes
8/1/2010 - PDF - English, German - STAHL
Learn More€58.41 -
SEP 1150 Beiblatt 3:2010-08
Shear Defect Catalogue W - Material-related Causes
8/1/2010 - PDF - English, German - STAHL
Learn More€58.50 -
JIS G 1256/AMENDMENT 1:2010
Iron and steel - Method for X-ray fluorescence spectrometric analysis (Amendment 1)
5/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 4108/AMENDMENT 1:2010 (R2015)
Alloy steel bars for special application bolting materials (Amendment 1)
5/20/2010 - PDF - Japanese - JSA
Learn More€25.00 -
€25.00
-
€25.00
-
VdTÜV WB 497 Supplement:2009-12
Hochwarmfester Walz- und Schmiedestahl X5 NiCrCeNb 32-27, Werkstoff-Nr. 1.4877
12/1/2009 - PDF - German - VDTUV
Learn More€25.00 -
VdTÜV WB 432/2 Supplement:2009-12
Hochkorrosionsbeständige Nickelbasislegierung NiCr 21 Mo, Werkstoff-Nr. 2.4858
12/1/2009 - PDF - German - VDTUV
Learn More€25.00 -
JIS G 1601/AMENDMENT 1:2009 (R2014)
Methods of sampling for chemical analysis of ferroalloys (Part 1: Ferromanganese, ferrosilicon, ferrochromium, ferrosilicomanganese and ferrosilicochromium) (Amendment 1)
6/20/2009 - PDF - Japanese - JSA
Learn More€25.00 -
JIS G 3214/AMENDMENT 1:2009 (R2013)
Stainless steel forgings for pressure vessels (Amendment 1)
2/20/2009 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
€32.50
-
€13.00
-
JIS G 0306/AMENDMENT 1:2009 (R2013)
Steel forgings - General technical requirements (Amendment 1)
2/20/2009 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
€32.50
-
JIS G 3206/AMENDMENT 1:2008 (R2017)
High strength chromium-molybdenum alloy steel forgings for pressure vessels under high-temperature service (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3202/AMENDMENT 1:2008 (R2017)
Carbon steel forgings for pressure vessels (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3203/AMENDMENT 1:2008 (R2017)
Alloy steel forgings for pressure vessels for high-temperature service (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3204/AMENDMENT 1:2008 (R2017)
Quenched and tempered alloy steel forgings for pressure vessels (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3221/AMENDMENT 1:2008 (R2017)
Chromium Molybdenum steel forgings for general use (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3222/AMENDMENT 1:2008 (R2017)
Nickel Chromium Molybdenum steel forgings for general use (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3251/AMENDMENT 1:2008
Carbon steel blooms and billets for forgings (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 4901/AMENDMENT 1:2008 (R2017)
Corrosion-resisting and heat-resisting superalloy bars (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3223/AMENDMENT 1:2008 (R2017)
High tensile strength steel forgings for tower flanges (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 3205/AMENDMENT 1:2008 (R2017)
Carbon and alloy steel forgings for pressure vessels for low-temperature service (Amendment 1)
3/20/2008 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
€25.00
-
€32.50
-
JIS H 1402/AMENDMENT 1:2006 (R2017)
Methods for chemical analysis of tungsten powder and tungsten carbide powder (Amendment 1)
8/20/2006 - PDF - Japanese - JSA
Learn More€25.00 -
UNE-EN 1123-1:2000/A1:2006
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
3/29/2006 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 1123-1:2000/A1:2006
Pipes and fittings of longitudinally welded hot-dip galvanized steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
3/29/2006 - PDF - English - AENOR
Learn More€72.00 -
UNE-EN 1124-1:2000/A1:2006
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
3/29/2006 - PDF - Spanish - AENOR
Learn More€60.00 -
UNE-EN 1124-1:2000/A1:2006
Pipes and fittings of longitudinally welded stainless steel pipes with spigot and socket for waste water systems - Part 1: Requirements, testing, quality control
3/29/2006 - PDF - English - AENOR
Learn More€72.00 -
€32.50
-
JIS H 4090/AMENDMENT 1:2006 (R2015)
Aluminium and aluminium alloy welded pipes and tubes (Amendment 1)
3/25/2006 - PDF - Japanese - JSA
Learn More€32.50 -
€32.50
-
€32.50
-
JIS H 4311/AMENDMENT 1:2006 (R2015)
Lead and lead alloy tubes for common industries (Amendment 1)
3/25/2006 - PDF - Japanese - JSA
Learn More€32.50 -
JIS G 1228/AMENDMENT 1:2006 (R2015)
Iron and steel - Methods for determination of nitrogen content (Amendment 1)
2/20/2006 - PDF - Japanese - JSA
Learn More€25.00 -
JIS H 1067/AMENDMENT 1:2006 (R2015)
Methods for determination of oxygen in copper (Amendment 1)
2/20/2006 - PDF - Japanese - JSA
Learn More€25.00 -
JIS Z 2613/AMENDMENT 1:2006 (R2015)
General rules for determination of oxygen in metallic materials (Amendment 1)
2/20/2006 - PDF - Japanese - JSA
Learn More€25.00