77.120.10 : Aluminium and aluminium alloys
-
€369.00
-
BS EN 683-2:2024
Aluminium and aluminium alloys. Finstock Mechanical properties
4/4/2024 - PDF - English -
Learn More€180.00 -
DIN EN 573-3:2024-03
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products, German version EN 573-3:2019+A2:2023
3/1/2024 - PDF - German -
Learn More€115.33 -
24/30464967 DC:2024
BS ISO 115 Unalloyed aluminium ingots for remelting - Classification and composition
2/5/2024 - PDF - English -
Learn More€24.00 -
ASTM G67-24
Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
1/15/2024 - PDF - English -
Learn More€60.00 -
ASTM G67-24 + Redline
Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
1/15/2024 - PDF - English -
Learn More€71.00 -
ALPEMA Standards
the Standards of the Brazed Aluminium Plate-Fin Heat Exchanger Manufacturer's Association
1/1/2024 - PDF - English -
Learn More€59.00 -
ALPEMA Standards
the Standards of the Brazed Aluminium Plate-Fin Heat Exchanger Manufacturer's Association
1/1/2024 - Papier - English -
Learn More€112.00 -
BS EN 573-3:2019+A2:2023
Aluminium and aluminium alloys. Chemical composition form of wrought products
12/25/2023 - PDF - English -
Learn More€348.00 -
NBN EN 573-3:2019+A2:2023
Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroyés - Partie 3 : Composition chimique et forme des produits
12/21/2023 - PDF - French -
Learn More€184.00 -
NBN EN 573-3:2019+A2:2023
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
12/21/2023 - PDF - English -
Learn More€184.00 -
NBN EN 573-3:2019+A2:2023
Aluminium und Aluminiumlegierungen - Chemische Zusammensetzung und Form von Halbzeug - Teil 3: Chemische Zusammensetzung und Erzeugnisformen
12/21/2023 - PDF - German -
Learn More€184.00 -
NF EN 573-3+A2, A02-120-3 (12/2023)
Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroyés - Partie 3 : composition chimique et forme des produits
12/1/2023 - Paper - French -
Learn More€119.00 -
ASTM B317/B317M-23
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
11/1/2023 - PDF - English -
Learn More€60.00 -
ASTM B317/B317M-23 + Redline
Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)
11/1/2023 - PDF - English -
Learn More€71.00 -
BS ISO 2107:2023
Aluminium and aluminium alloys. Wrought products. Temper designations
10/3/2023 - PDF - English -
Learn More€180.00 -
€429.40
-
SAE AMS 4269B:2023-08-01
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024-T361) Solution Heat Treated and Cold Worked
8/1/2023 - PDF - English -
Learn More€66.00 -
PR NF EN 573-3+A1/A2, A02-120-3/A2PR (07/2023)
Aluminium et alliages d'aluminium - Composition chimique et forme des produits corroyés - Partie 3 : Composition chimique et forme des produits
7/1/2023 - Paper - English, French -
Learn More€45.00 -
ASTM B648-23 + Redline
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
6/1/2023 - PDF - English -
Learn More€57.00 -
ASTM B648-23
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor
6/1/2023 - PDF - English -
Learn More€48.00 -
€54.00
-
23/30470932 DC:2023
BS EN 573-3 AMD 2. Aluminium and aluminium alloys. Chemical composition form of wrought products Part 3.
5/17/2023 - PDF - English -
Learn More€24.00 -
ASTM E1826-23 + Redline
Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
5/1/2023 - PDF - English -
Learn More€65.00 -
ASTM E1826-23
Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
5/1/2023 - PDF - English -
Learn More€54.00 -
UNE-EN 14242:2023
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis (Endorsed by Asociación Española de Normalización in April of 2023.)
4/21/2023 - PDF - English -
Learn More€66.00 -
23/30469185 DC:2023
BS EN 683-2. Aluminium and aluminium alloys. Finstock Part 2. Mechanical properties
4/13/2023 - PDF - English -
Learn More€24.00 -
ASTM B647-23 + Redline
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
4/1/2023 - PDF - English -
Learn More€57.00 -
DIN EN 14242:2023-04
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis, German version EN 14242:2023
4/1/2023 - PDF - German -
Learn More€79.72 -
DIN EN 683-2:2023-04
Aluminium and aluminium alloys - Finstock - Part 2: Mechanical properties, German and English version prEN 683-2:2023
4/1/2023 - PDF - English, German -
Learn More€59.63 -
ASTM B647-23
Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage
4/1/2023 - PDF - English -
Learn More€48.00 -
BS EN 14242:2023 + Redline
Tracked Changes. Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectrometric analysis
3/20/2023 - PDF - English -
Learn More€326.00 -
BS EN 14242:2023
Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectrometric analysis
3/9/2023 - PDF - English -
Learn More€250.00 -
NBN EN 14242:2023
Aluminium et alliages d’aluminium - Analyse chimique - Analyse par spectrométrie d’émission optique avec source à plasma induit par haute fréquence
3/2/2023 - PDF - French -
Learn More€121.00 -
NBN EN 14242:2023
Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectrometric analysis
3/2/2023 - PDF - English -
Learn More€121.00 -
NBN EN 14242:2023
Aluminium und Aluminiumlegierungen - Chemische Analyse - Optische Emissionsspektrometrie mit induktiv gekoppeltem Plasma
3/2/2023 - PDF - German -
Learn More€121.00 -
NF EN 14242, A06-012 (03/2023)
Aluminium et alliages d'aluminium - Analyse chimique - Analyse par spectrométrie d'émission optique avec source à plasma induit par haute fréquence
3/1/2023 - Paper - French -
Learn More€75.67 -
UNE-EN 573-3:2020+A1:2023
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
1/11/2023 - PDF - Spanish -
Learn More€100.00 -
UNE-EN 851:2023
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
1/11/2023 - PDF - English -
Learn More€72.00 -
UNE-EN 573-3:2020+A1:2023
Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 3: Chemical composition and form of products
1/11/2023 - PDF - English -
Learn More€120.00 -
UNE-EN 851:2023
Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications
1/11/2023 - PDF - Spanish -
Learn More€60.00 -
ASTM Volume 02.02 - Multi-User - Single-Site Online
Aluminum and Magnesium Alloys
The subscription ends 12 months from the day your order is processed.
1/1/2023 - Internet - English -
Learn More€859.75 -
ASTM G112-22 + Redline
Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
12/1/2022 - PDF - English -
Learn More€65.00 -
ASTM G112-22
Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys
12/1/2022 - PDF - English -
Learn More€54.00 -
UNE-EN 941:2022
Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications
11/23/2022 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 941:2022
Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications
11/23/2022 - PDF - English -
Learn More€72.00 -
BS EN 12392:2016+A1:2022
Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment
10/14/2022 - PDF - English -
Learn More€377.00 -
UNE-EN ISO 7668:2022
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
6/15/2022 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 7668:2022
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
6/15/2022 - PDF - English -
Learn More€81.60 -
UNE-EN 1706:2020+A1:2022
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
6/1/2022 - PDF - Spanish -
Learn More€80.00 -
UNE-EN 1706:2020+A1:2022
Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
6/1/2022 - PDF - English -
Learn More€96.00 -
ASTM B989-22 + Redline
Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
4/1/2022 - PDF - English -
Learn More€53.00 -
ASTM B989-22
Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
4/1/2022 - PDF - English -
Learn More€46.00 -
ASTM B645-21
Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
12/1/2021 - PDF - English -
Learn More€51.00 -
ASTM B945-21
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
12/1/2021 - PDF - English -
Learn More€46.00 -
ASTM E2792-21
Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
12/1/2021 - PDF - English -
Learn More€51.00 -
ASTM B645-21 + Redline
Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys
12/1/2021 - PDF - English -
Learn More€61.00 -
ASTM B945-21 + Redline
Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
12/1/2021 - PDF - English -
Learn More€53.00 -
ASTM E2792-21 + Redline
Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion
12/1/2021 - PDF - English -
Learn More€61.00 -
ASTM B327-21 + Redline
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
11/1/2021 - PDF - English -
Learn More€53.00 -
ASTM B327-21
Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys
11/1/2021 - PDF - English -
Learn More€46.00 -
NF EN ISO 7668, A91-489 (09/2021)
Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
9/1/2021 - Paper - French -
Learn More€75.67 -
€10.63
-
NF EN 13445-8, E86-200-8 (05/2021)
Unfired pressure vessels - Part 8 : Additional requirements for pressure vessels of aluminium and aluminium alloys
5/1/2021 - Paper - French -
Learn More€99.33 -
NF EN 12206-1, T34-750-1 (05/2021)
Paints and varnishes - Coating of aluminium and aluminium alloys for architectural purposes - Part 1 : coatings prepared from thermosetting coating powder
5/1/2021 - Paper - French -
Learn More€75.67 -
SAE AMS 4476A:2021-02-11
Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed
2/11/2021 - PDF - English -
Learn More€66.00 -
VDA 239-300:2021-02
Experimental determination of mechanical properties of aluminum sheets for CAE-calculation - Testing and documentation
2/1/2021 - PDF - English, German -
Learn More€298.75 -
SAE AMS 4336C:2020-12-10
Aluminum Alloy, Extruded Rod, Bar, and Profiles (7055-T76511) 8.0Zn - 2.3Cu - 2.0Mg - 0.16Zr Solution Heat Treated, Stress-Relieved, and Overaged
12/10/2020 - PDF - English -
Learn More€66.00 -
ASTM E127-20
Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
12/1/2020 - PDF - English -
Learn More€57.00 -
ASTM E127-20 + Redline
Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks
12/1/2020 - PDF - English -
Learn More€68.00 -
BS EN ISO 2106:2020 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
11/12/2020 - PDF - English -
Learn More€197.00 -
UNE-EN 1676:2020
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
11/11/2020 - PDF - English -
Learn More€81.60 -
UNE-EN 1676:2020
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
11/11/2020 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 2106:2020
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
10/21/2020 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 2106:2020
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method (ISO 2106:2019)
10/21/2020 - PDF - Spanish -
Learn More€60.00 -
UNE-EN 14726:2020
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
9/23/2020 - PDF - Spanish -
Learn More€73.00 -
UNE-EN 14726:2020
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
9/23/2020 - PDF - English -
Learn More€87.60 -
DIN EN 1676:2020-06
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications, German version EN 1676:2020
6/1/2020 - PDF - German -
Learn More€72.80 -
NBN EN 1676:2020
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
5/27/2020 - PDF - English -
Learn More€89.00 -
NBN EN 1676:2020
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
5/27/2020 - PDF - French -
Learn More€89.00 -
NBN EN 1676:2020
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications
5/27/2020 - PDF - German -
Learn More€89.00 -
SAE AMS 4325A:2020-05-05
Aluminum Alloy, Extruded Wide Panel Profiles (7150-T77511) 6.4Zn - 2.4Mg - 2.2Cu - 0.12Zr Solution Heat Treated, Stress-Relieved, Straightened and Overaged
5/5/2020 - PDF - English -
Learn More€66.00 -
ASTM B807/B807M-20 + Redline
Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
5/1/2020 - PDF - English -
Learn More€61.00 -
ASTM G69-20 + Redline
Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
5/1/2020 - PDF - English -
Learn More€61.00 -
ASTM B807/B807M-20
Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
5/1/2020 - PDF - English -
Learn More€51.00 -
ASTM G69-20
Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
5/1/2020 - PDF - English -
Learn More€51.00 -
BS EN 1676:2020 + Redline
Tracked Changes. Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
4/30/2020 - PDF - English -
Learn More€235.00 -
BS EN 1676:2020
Aluminium and aluminium alloys. Alloyed ingots for remelting. Specifications
4/27/2020 - PDF - English -
Learn More€180.00 -
NF EN 1676, A57-130 (04/2020)
Aluminium and aluminium alloys - Alloyed ingots for remelting - Specifications - Aluminium et alliages d'aluminium - Lingots pour refusion en aluminium allié - Spécifications
4/1/2020 - Paper - French -
Learn More€75.67 -
BS EN ISO 2376:2019 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
2/28/2020 - PDF - English -
Learn More€197.00 -
BS ISO 6279:2017 + Redline
Tracked Changes. Plain bearings. Aluminium alloys for solid bearings
2/26/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 6581:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
2/26/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 2085:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
2/25/2020 - PDF - English -
Learn More€197.00 -
BS EN 14726:2019 + Redline
Tracked Changes. Aluminium and aluminium alloys. Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
2/24/2020 - PDF - English -
Learn More€326.00 -
BS EN 515:2017 + Redline
Tracked Changes. Aluminium and aluminium alloys. Wrought products. Temper designations
2/24/2020 - PDF - English -
Learn More€326.00 -
BS EN ISO 3211:2018 + Redline
Tracked Changes. Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
2/24/2020 - PDF - English -
Learn More€197.00 -
BS EN ISO 2106:2020
Anodizing of aluminium and its alloys. Determination of mass per unit area (surface density) of anodic oxidation coatings. Gravimetric method
1/23/2020 - PDF - English -
Learn More€151.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 2376:2019
Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019)
12/4/2019 - PDF - English -
Learn More€63.60 -
SAE AMS 4328B:2019-11-25
Aluminum Alloy, Plate (2397-T87) 2.8Cu - 1.4Li - 0.30Mn - 0.12Zr - 0.10Zn Solution Heat Treated, Cold Worked, and Artificially Aged
11/25/2019 - PDF - English -
Learn More€70.00 -
ASTM B646-19
Standard Practice for Fracture Toughness Testing of Aluminum Alloys
11/1/2019 - PDF - English -
Learn More€51.00 -
ASTM B646-19 + Redline
Standard Practice for Fracture Toughness Testing of Aluminum Alloys
11/1/2019 - PDF - English -
Learn More€61.00 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - Spanish -
Learn More€58.00 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - English -
Learn More€98.40 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - Spanish -
Learn More€49.00 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - English -
Learn More€62.40 -
UNE-EN ISO 3211:2019
Anodizing of aluminium and its alloys - Assessment of resistance of anodic oxidation coatings to cracking by deformation (ISO 3211:2018)
10/2/2019 - PDF - English -
Learn More€69.60 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - Spanish -
Learn More€53.00 -
UNE-EN ISO 2085:2019
Anodizing of aluminium and its alloys - Check for continuity of thin anodic oxidation coatings - Copper sulfate test (ISO 2085:2018)
10/2/2019 - PDF - English -
Learn More€58.80 -
UNE-EN ISO 8251:2019
Anodizing of aluminium and its alloys - Measurement of abrasion resistance of anodic oxidation coatings (ISO 8251:2018)
10/2/2019 - PDF - Spanish -
Learn More€82.00 -
UNE-EN ISO 6581:2019
Anodizing of aluminium and its alloys - Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings (ISO 6581:2018)
10/2/2019 - PDF - Spanish -
Learn More€52.00 -
UNE-EN ISO 8994:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method (ISO 8994:2018)
10/2/2019 - PDF - English -
Learn More€63.60 -
ASTM E1793-19
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
7/1/2019 - PDF - English -
Learn More€46.00 -
ASTM E1793-19 + Redline
Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
7/1/2019 - PDF - English -
Learn More€53.00 -
DIN EN 14726:2019-06
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry, German version EN 14726:2019
6/1/2019 - PDF - German -
Learn More€92.62 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - Spanish -
Learn More€68.00 -
UNE-EN ISO 8993:2019
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Chart method (ISO 8993:2018)
5/8/2019 - PDF - English -
Learn More€81.60 -
ASTM B594-19e1
Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
5/1/2019 - PDF - English -
Learn More€51.00 -
ASTM D4340-19
Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
5/1/2019 - PDF - English -
Learn More€46.00 -
ASTM B594-19e1 + Redline
Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products
5/1/2019 - PDF - English -
Learn More€61.00 -
ASTM D4340-19 + Redline
Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
5/1/2019 - PDF - English -
Learn More€53.00 -
BS EN ISO 2376:2019
Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
4/24/2019 - PDF - English -
Learn More€151.00 -
NBN EN 14726:2019
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
4/17/2019 - PDF - French -
Learn More€142.00 -
NBN EN 14726:2019
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
4/17/2019 - PDF - German -
Learn More€142.00 -
NBN EN 14726:2019
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
4/17/2019 - PDF - English -
Learn More€142.00 -
UNE 38202:2019
Aluminium and aluminium alloys for casting. Commercial equivalences.
4/10/2019 - PDF - Spanish -
Learn More€39.00 -
€52.00
-
UNE 38201:2019
Aluminium and aluminium alloys for casting. Official equivalences.
4/10/2019 - PDF - Spanish -
Learn More€34.00 -
€25.00
-
BS EN 14726:2019
Aluminium and aluminium alloys. Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
3/21/2019 - PDF - English -
Learn More€250.00 -
NF EN 14726, A06-590 (03/2019)
Aluminium and aluminium alloys - Determination of the chemical composition of aluminium and aluminium alloys by spark optical emission spectrometry
3/1/2019 - Paper - French -
Learn More€86.50 -
BS EN ISO 3211:2018
Anodizing of aluminium and its alloys. Assessment of resistance of anodic oxidation coatings to cracking by deformation
1/4/2019 - PDF - English -
Learn More€151.00 -
PR NF EN 13445-8/A2, E86-200-8/A2PR (12/2018)
Unfired pressure vessels - Part 8 : additional requirements for pressure vessels of aluminium and aluminium alloys
12/1/2018 - Paper - French -
Learn More€64.50 -
BS EN ISO 6581:2018
Anodizing of aluminium and its alloys. Determination of the comparative fastness to ultraviolet light and heat of coloured anodic oxidation coatings
10/8/2018 - PDF - English -
Learn More€151.00 -
BS EN ISO 2085:2018
Anodizing of aluminium and its alloys. Check for continuity of thin anodic oxidation coatings. Copper sulfate test
10/5/2018 - PDF - English -
Learn More€151.00 -
NF A06-576 (10/2018)
Chemical analysis of aluminium and aluminium alloys - Spectrophotometric determination of manganese
10/1/2018 - Paper - French -
Learn More€60.67 -
UNE-EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
6/27/2018 - PDF - Spanish -
Learn More€74.00 -
UNE-EN ISO 7599:2018
Anodizing of aluminium and its alloys - Method for specifying decorative and protective anodic oxidation coatings on aluminium (ISO 7599:2018)
6/27/2018 - PDF - English -
Learn More€88.80 -
UNE-EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
6/6/2018 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 10215:2018
Anodizing of aluminium and its alloys - Visual determination of image clarity of anodic oxidation coatings - Chart scale method (ISO 10215:2018)
6/6/2018 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 2143:2018
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
5/30/2018 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 2143:2018
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment (ISO 2143:2017)
5/30/2018 - PDF - English -
Learn More€68.40 -
UNE-EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
5/16/2018 - PDF - English -
Learn More€72.00 -
UNE-EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
5/16/2018 - PDF - Spanish -
Learn More€57.00 -
UNE-EN ISO 3210:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s) (ISO 3210:2017)
5/16/2018 - PDF - Spanish -
Learn More€60.00 -
UNE-EN ISO 2931:2018
Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance (ISO 2931:2017)
5/16/2018 - PDF - English -
Learn More€68.40 -
ASTM B37-18 + Redline
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
5/1/2018 - PDF - English -
Learn More€53.00 -
ASTM F3318-18
Standard for Additive Manufacturing –, Finished Part Properties –, Specification for AlSi10Mg with Powder Bed Fusion –, Laser Beam
5/1/2018 - PDF - English -
Learn More€51.00 -
ASTM B37-18
Standard Specification for Aluminum for Use in Iron and Steel Manufacture
5/1/2018 - PDF - English -
Learn More€46.00 -
ASTM F3318-18 + Redline
Standard for Additive Manufacturing –, Finished Part Properties –, Specification for AlSi10Mg with Powder Bed Fusion –, Laser Beam
5/1/2018 - PDF - English -
Learn More€61.00 -
NF A06-579 (04/2018)
Chemical analysis of aluminium and aluminium alloys - Determination of magnesium
4/1/2018 - Paper - French -
Learn More€75.67 -
UNE 38244:2018
Aluminium and aluminium alloys for casting. Group Al-Si, Alloy L-2562, Al-10Si2Cu
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38231:2018
Aluminium and aluminium alloys for casting. Group Al-Mg, Alloy L-2310, Al-10Mg
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38264:2018
Aluminium and aluminium alloys for casting. Group Al-Si, Alloy L-2640, Al-12Si2Cu
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38125:2018
Aluminium and aluminium alloys for casting. Group Al. Alloy L-2051, Al 99,5.
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38257:2018
Aluminium and aluminium alloys for casting. Group Al-Si, Alloy L-2570, Al-5SiMg
1/10/2018 - PDF - Spanish -
Learn More€39.00 -
UNE 38233:2018
Aluminium and aluminium alloys for casting. Group Al-Mg. Alloy L-2331, Al-6Mg
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38215:2018
Aluminium and aluminium alloys for casting. Group Al-Cu, Alloy L-2150, Al-4Cu2NiMg
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
UNE 38291:2018
Aluminium and aluminium alloys for casting. Group Al-Sn. Alloy L-2910, Al-6SnNi.
1/10/2018 - PDF - Spanish -
Learn More€34.00 -
SAE AMS 4268A:2017-11-30
Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn, (2024-T81 Sheet, -T851 Plate) Solution Heat Treated, Cold Worked and Artificially Aged
11/30/2017 - PDF - English -
Learn More€60.00 -
UNE 38213:2017
Aluminium and aluminium alloys for casting. Group Al-Cu. Alloy L-2130 Al-7CuSi
11/22/2017 - PDF - Spanish -
Learn More€34.00 -
€71.00
-
NF EN ISO 2143, A91-482 (11/2017)
Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye-spot test with prior acid treatment - Anodisation de l'aluminium et de ses alliages - Appréciation de la perte du pouvoir absorbant des couches anodiques après colmatage - Essai à la goutte de colorant avec action acide préalable
11/1/2017 - Paper - French -
Learn More€48.00 -
SAE AMS 4329B:2017-10-10
Aluminum Alloy, Plate (7085-T7651) 7.5Zn - 1.6Cu - 1.5Mg - 0.12Zr Solution Heat Treated, Stress-Relieved, and Overaged
10/10/2017 - PDF - English -
Learn More€66.00 -
ASTM E1251-17a
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
10/1/2017 - PDF - English -
Learn More€51.00 -
ASTM E1251-17a + Redline
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry
10/1/2017 - PDF - English -
Learn More€61.00 -
UNE 38118:2017
Wrought aluminium and aluminium alloys. 1000 series. Al. Alloy EN AW-1080 A/EN AW-Al 99,8 (A).
9/20/2017 - PDF - Spanish -
Learn More€46.00 -
ASTM B998-17
Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
7/1/2017 - PDF - English -
Learn More€46.00 -
ASTM B998-17 + Redline
Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
7/1/2017 - PDF - English -
Learn More€53.00 -
UNE-EN 515:2017
Aluminium and aluminium alloys - Wrought products - Temper designations
6/28/2017 - PDF - Spanish -
Learn More€74.00 -
UNE-EN 515:2017
Aluminium and aluminium alloys - Wrought products - Temper designations
6/28/2017 - PDF - English -
Learn More€88.80 -
DIN EN 515:2017-05
Aluminium and aluminium alloys - Wrought products - Temper designations, German version EN 515:2017
5/1/2017 - PDF - German -
Learn More€85.79 -
DIN EN 515:2017-05
Aluminium and aluminium alloys - Wrought products - Temper designations
5/1/2017 - PDF - English -
Learn More€107.48 -
NBN EN 515:2017
Aluminium and aluminium alloys - Wrought products - Temper designations
4/19/2017 - PDF - German -
Learn More€121.00 -
NBN EN 515:2017
Aluminium and aluminium alloys - Wrought products - Temper designations
4/19/2017 - PDF - English -
Learn More€121.00 -
NBN EN 515:2017
Aluminium and aluminium alloys - Wrought products - Temper designations
4/19/2017 - PDF - French -
Learn More€121.00 -
€151.00
-
BS EN 515:2017
Aluminium and aluminium alloys. Wrought products. Temper designations
3/31/2017 - PDF - English -
Learn More€250.00 -
ASTM E3061-17
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
1/15/2017 - PDF - English -
Learn More€57.00 -
ASTM E3061-17 + Redline
Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)
1/15/2017 - PDF - English -
Learn More€68.00 -
ANSI H35.1/H35.1M-2017
American National Standard Alloy and Temper Designation Systems for Aluminum, 2017
1/1/2017 - PDF - English -
Learn More€161.00 -
€27.00
-
€27.00
-
€288.00
-
UNE-EN 755-9:2016 (R2022)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
10/11/2016 - PDF - French -
Learn More€81.60 -
UNE-EN 755-9:2016 (R2022)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
10/11/2016 - PDF - Spanish -
Learn More€68.00 -
UNE-EN 755-9:2016 (R2022)
Aluminium and aluminium alloys - Extruded rod/bar, tube and profiles - Part 9: Profiles, tolerances on dimensions and form
10/11/2016 - PDF - English -
Learn More€81.60 -
SAE AMS 7918A:2020-09-21
Beryllium Aluminum Alloy Investment Castings 64.9Be - 30Al - 3Ag - 1Co - 0.75Ge As Cast
9/26/2016 - PDF - English -
Learn More€70.00 -
€50.18
-
SAE AMS 4288:2016-05-12
Aluminum Alloy Castings 7.0Si - 0.58Mg - 0.15Ti (E357.0-T6) Solution and Precipitation Heat Treated
5/12/2016 - PDF - English -
Learn More€89.00 -
From: €23.13
-
JIS Z 3604:2016
Recommended practice for inert gas shielded arc welding of aluminium and aluminium alloys
3/22/2016 - PDF - Japanese -
Learn More€36.27 -
DIN 50935-2:2015-12
Chromium(VI) free passivation of non-ferrous metals - Part 2: Aluminium and aluminium alloys
12/1/2015 - PDF - German -
Learn More€45.98 -
DIN CEN/TR 16749*DIN SPEC 31601:2015-02
Aluminium and aluminium alloys - Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products, English version CEN/TR 16749:2014
2/1/2015 - PDF - English, German -
Learn More€96.64 -
€70.00
-
€22.00
-
€22.00
-
PD CEN/TR 16748:2014
Aluminium and aluminium alloys. Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
12/31/2014 - PDF - English -
Learn More€250.00 -
CEN/TR 16748:2014
Aluminium and aluminium alloys - Mechanical potential of Al-Si alloys for high pressure, low pressure and gravity die casting
12/1/2014 - PDF - English -
Learn More€121.00 -
PD CEN/TR 16749:2014
Aluminium and aluminium alloys. Classification of Defects and Imperfections in High Pressure, Low Pressure and Gravity Die Cast Products
10/31/2014 - PDF - English -
Learn More€293.00