77 : Metallurgy

Items 1401 to 1600 of 14673 total

Set Ascending Direction
per page

List  Grid 

  • DIN EN 12165:2022-09

    Copper and copper alloys - Wrought and unwrought forging stock, German and English version prEN 12165:2022
    9/1/2022 - PDF - English, German -
    Learn More
    €92.62

  • NF EN 1978, A53-704 (09/2022)

    Cuivre et alliages de cuivre - Cathodes en cuivre
    9/1/2022 - Paper - French -
    Learn More
    €75.67

  • PR NF EN 12163, A51-301PR (09/2022)

    Cuivre et alliages de cuivre - Barres pour usages généraux
    9/1/2022 - Paper - English, French -
    Learn More
    €115.50

  • ASTM A635/A635M-22

    Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
    9/1/2022 - PDF - English -
    Learn More
    €60.00

  • ASTM B214-22

    Standard Test Method for Sieve Analysis of Metal Powders
    9/1/2022 - PDF - English -
    Learn More
    €46.00

  • ASTM A595/A595M-22 + Redline

    Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
    9/1/2022 - PDF - English -
    Learn More
    €61.00

  • PR NF EN 12168, A51-306PR (09/2022)

    Cuivre et alliages de cuivre - Barres creuses pour décolletage
    9/1/2022 - Paper - English, French -
    Learn More
    €107.50

  • ASTM B311-22 + Redline

    Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity
    9/1/2022 - PDF - English -
    Learn More
    €61.00

  • ASTM E159-22

    Standard Test Method for Loss of Mass in a Reducing Gas Atmosphere for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)
    9/1/2022 - PDF - English -
    Learn More
    €46.00

  • BS EN 15093:2022 + Redline

    Tracked Changes. Safety of machinery. Safety requirements for hot flat rolling mills
    8/29/2022 - PDF - English -
    Learn More
    €492.00

  • PD CEN/TR 17856:2022

    Measurement of the coating properties of non-oriented electrical steel
    8/25/2022 - PDF - English -
    Learn More
    €151.00

  • PD ISO/TS 6084:2022

    Steel and steel products. Vocabulary relating to chemical analysis
    8/23/2022 - PDF - English -
    Learn More
    €348.00

  • PD ISO/TS 21913:2022

    Temperature verification method applied to dynamic fatigue testing
    8/23/2022 - PDF - English -
    Learn More
    €180.00

  • PD ISO/TR 20580:2022

    Preparation of metallographic specimens
    8/22/2022 - PDF - English -
    Learn More
    €250.00

  • SAE AMS 6930G:2022-08-19

    Titanium Alloy Bars, Forgings and Forging Stock, 6.0Al - 4.0V, Solution Heat Treated and Aged
    8/19/2022 - PDF - English -
    Learn More
    €75.00

  • SAE AMS 6910D:2022-08-19

    Titanium Alloy Bars, Forgings and Forging Stock, 8Al - 1Mo - 1V, Duplex Annealed
    8/19/2022 - PDF - English -
    Learn More
    €75.00

  • 22/30447431 DC:2022

    BS EN 12163. Copper and copper alloys. Rod for general purposes
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447446 DC:2022

    BS EN 12166. Copper and copper alloys. Wire for general purposes
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447437 DC:2022

    BS EN 12165. Copper and copper alloys. Wrought and unwrought forging stock
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447434 DC:2022

    Copper and copper alloys. Profiles and bars for general purposes
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447449 DC:2022

    BS EN 12168. Copper and copper alloys. Hollow rod for free machining purposes
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447440 DC:2022

    BS EN 12420. Copper and copper alloys. Forgings
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30447443 DC:2022

    BS EN 12164. Copper and copper alloys. Rod for free machining purposes
    8/18/2022 - PDF - English -
    Learn More
    €24.00

  • ASTM E1086-22

    Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
    8/15/2022 - PDF - English -
    Learn More
    €54.00

  • ASTM E2209-22 + Redline

    Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
    8/15/2022 - PDF - English -
    Learn More
    €65.00

  • BS EN 14753:2022

    Safety of machinery. Safety requirements for machinery and equipment for continuous casting of steel
    8/15/2022 - PDF - English -
    Learn More
    €377.00

  • ASTM E1086-22 + Redline

    Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry
    8/15/2022 - PDF - English -
    Learn More
    €65.00

  • BS EN 15061:2022

    Safety of machinery. Safety requirements for strip processing line machinery and equipment
    8/15/2022 - PDF - English -
    Learn More
    €398.00

  • ASTM E2209-22

    Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry
    8/15/2022 - PDF - English -
    Learn More
    €54.00

  • BS ISO 23838:2022

    Metallic materials. High strain rate torsion test at room temperature
    8/12/2022 - PDF - English -
    Learn More
    €331.00

  • PD ISO/TR 7655:2022

    Corrosion of metals and alloys. Overview of metal corrosion protection when using disinfectants
    8/10/2022 - PDF - English -
    Learn More
    €348.00

  • 22/30427355 DC:2022

    BS ISO 630-5. Structural steels Part 5. Technical delivery conditions for structural with improved atmospheric corrosion resistance
    8/4/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30455575 DC:2022

    BS EN 10270-1. Steel wire for mechanical springs. Part 1. Patented cold drawn unalloyed spring steel
    8/4/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30455578 DC:2022

    BS EN 10244-2. Steel wire and products. Non-ferrous metallic coatings on steel wire. Part 2. Zinc or zinc alloy
    8/4/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30455581 DC:2022

    BS EN 10264-3. Steel wire and products. for ropes. Part 3. Round shaped non alloyed steel high duty applications
    8/4/2022 - PDF - English -
    Learn More
    €24.00

  • DIN EN ISO 16539:2022-08

    Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - „Dry” and „wet” conditions at constant absolute humidity (ISO 16539:2013), German version EN ISO 16539:2022
    8/1/2022 - PDF - German -
    Learn More
    €92.62

  • DIN 50125:2022-08

    Testing of metallic materials - Tensile test pieces
    8/1/2022 - PDF - German -
    Learn More
    €79.72

  • NF EN 10357, A49-249 (08/2022)

    Austenitic, austenitic-ferritic and ferritic longitudinally welded stainless steel tubes for the food and chemical industry
    8/1/2022 - Paper - French -
    Learn More
    €60.67

  • PR NF EN ISO 23779, E63-705PR (08/2022)

    Équipements de grenaillage - Prescriptions de sécurité et de l'environnement
    8/1/2022 - Paper - English, French -
    Learn More
    €107.50

  • DIN 17611:2022-08

    Anodized products of wrought aluminium and wrought aluminium alloys - Technical conditions of delivery
    8/1/2022 - PDF - German -
    Learn More
    €52.90

  • ASTM A1007-22 + Redline

    Standard Specification for Carbon Steel Wire for Wire Rope
    8/1/2022 - PDF - English -
    Learn More
    €65.00

  • DIN EN 13600:2022-08

    Copper and copper alloys - Seamless copper tubes for electrical purposes, German version EN 13600:2021
    8/1/2022 - PDF - German -
    Learn More
    €85.79

  • NF EN ISO 17636-1, A89-510-1 (08/2022)

    Non-destructive testing of welds - Radiographic testing - Part 1 : X - and gamma-ray techniques with film
    8/1/2022 - Paper - French -
    Learn More
    €108.33

  • DIN EN 10270-1:2022-08

    Steel wire for mechanical springs - Part 1: Patented cold drawn unalloyed spring steel wire, German and English version prEN 10270-1:2022
    8/1/2022 - PDF - English, German -
    Learn More
    €92.62

  • ASTM G193-22 + Redline

    Standard Terminology and Acronyms Relating to Corrosion
    8/1/2022 - PDF - English -
    Learn More
    €93.00

  • ASTM D1977-22 + Redline

    Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
    8/1/2022 - PDF - English -
    Learn More
    €53.00

  • DIN EN ISO 21207:2022-08

    Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015), German version EN ISO 21207:2022
    8/1/2022 - PDF - German -
    Learn More
    €72.80

  • DIN EN ISO 23779:2022-08

    Shot blasting machinery - Safety and environmental requirements (ISO/DIS 23779:2022), German and English version prEN ISO 23779:2022
    8/1/2022 - PDF - English, German -
    Learn More
    €110.00

  • PR NF EN 253/A1, E39-011/A1PR (08/2022)

    Tuyaux de chauffage urbain - Systèmes bloqués de tuyaux pour les réseaux d'eau chaude enterrées directement - Assemblages de tubes de service en acier manufacturés, isolation thermique en polyuréthane et tube de protection en polyéthylène
    8/1/2022 - Paper - English, French -
    Learn More
    €56.00

  • DIN EN 10051:2022-08

    Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape, German and English version prEN 10051:2022
    8/1/2022 - PDF - English, German -
    Learn More
    €79.72

  • DIN EN ISO 16808:2022-08

    Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022), German version EN ISO 16808:2022
    8/1/2022 - PDF - German -
    Learn More
    €92.62

  • DIN EN ISO 22479:2022-08

    Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019), German version EN ISO 22479:2022
    8/1/2022 - PDF - German -
    Learn More
    €85.79

  • DIN EN 10250-4:2022-08

    Open die steel forgings for general engineering purposes - Part 4: Stainless steels, German version EN 10250-4:2021
    8/1/2022 - PDF - German -
    Learn More
    €79.72

  • ASTM A1007-22

    Standard Specification for Carbon Steel Wire for Wire Rope
    8/1/2022 - PDF - English -
    Learn More
    €54.00

  • ASTM G193-22

    Standard Terminology and Acronyms Relating to Corrosion
    8/1/2022 - PDF - English -
    Learn More
    €78.00

  • ASTM D1977-22

    Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis
    8/1/2022 - PDF - English -
    Learn More
    €46.00

  • DIN EN ISO 12696:2022-08

    Cathodic protection of steel in concrete (ISO 12696:2022), German version EN ISO 12696:2022
    8/1/2022 - PDF - German -
    Learn More
    €158.04

  • NBN EN 12392:2016+A1:2022

    Aluminium et alliages d'aluminium - Produits corroyés et moulés - Exigences particulières pour les produits destinés à la fabrication des appareils à pression
    7/26/2022 - PDF - French -
    Learn More
    €205.00

  • CEN/TR 17856:2022

    Measurement of the coating properties of non-oriented electrical steel
    7/26/2022 - PDF - English -
    Learn More
    €58.00

  • NBN EN 12392:2016+A1:2022

    Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
    7/26/2022 - PDF - English -
    Learn More
    €205.00

  • NBN EN 12392:2016+A1:2022

    Aluminium und Aluminiumlegierungen - Knet- und Gusserzeugnisse - Besondere Anforderungen an Erzeugnisse für die Fertigung von Druckgeräten
    7/26/2022 - PDF - German -
    Learn More
    €205.00

  • CEN/TR 17856:2022

    Mesures des propriétés de vernis d’aciers électriques à grains non orientés
    7/26/2022 - PDF - French -
    Learn More
    €58.00

  • BS EN ISO 16808:2022 + Redline

    Tracked Changes. Metallic materials. Sheet and strip. Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
    7/25/2022 - PDF - English -
    Learn More
    €326.00

  • BS EN 941:2022 + Redline

    Tracked Changes. Aluminium and aluminium alloys. Circle and circle stock for the production of general applications. Specifications
    7/22/2022 - PDF - English -
    Learn More
    €235.00

  • 22/30445349 DC:2022

    BS EN 10051 Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels. Tolerances on dimensions and shape
    7/21/2022 - PDF - English -
    Learn More
    €24.00

  • UNE-EN ISO 2566-2:2022

    Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-06)
    7/20/2022 - PDF - Spanish -
    Learn More
    €83.00

  • UNE-EN 508-1:2022

    Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
    7/20/2022 - PDF - Spanish -
    Learn More
    €95.00

  • UNE-EN ISO 2566-1:2022

    Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06)
    7/20/2022 - PDF - Spanish -
    Learn More
    €85.00

  • UNE-EN 508-3:2022

    Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
    7/20/2022 - PDF - English -
    Learn More
    €103.20

  • UNE-EN ISO 2566-2:2022

    Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:2021, Corrected version 2022-06)
    7/20/2022 - PDF - English -
    Learn More
    €99.60

  • UNE-EN 508-1:2022

    Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 1: Steel
    7/20/2022 - PDF - English -
    Learn More
    €114.00

  • UNE-EN ISO 2566-1:2022

    Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06)
    7/20/2022 - PDF - English -
    Learn More
    €102.00

  • UNE-EN 508-3:2022

    Roofing and cladding products from metal sheet - Specification for self-supporting products of steel, aluminium or stainless steel sheet - Part 3: Stainless steel
    7/20/2022 - PDF - Spanish -
    Learn More
    €86.00

  • BS EN ISO 11652:2022 + Redline

    Tracked Changes. Steel and iron. Determination of cobalt content. Flame atomic absorption spectrometric method (ISO 11652:1997)
    7/18/2022 - PDF - English -
    Learn More
    €326.00

  • 22/30456826 DC:2022

    BS ISO 683-7. Heat-treatable steels, alloy steels and free-cutting Part 7. Bright products of non-alloy
    7/15/2022 - PDF - English -
    Learn More
    €24.00

  • ASTM B906-22 + Redline

    Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
    7/15/2022 - PDF - English -
    Learn More
    €68.00

  • 22/30456811 DC:2022

    BS ISO 16143-4. Stainless steels for general purposes Part 4. Bright products
    7/15/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30445364 DC:2022

    BS EN ISO 4545-1. Metallic materials. Knoop hardness test Part 1. Test method
    7/15/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30430470 DC:2022

    BS EN ISO 204. Metallic materials. Uniaxial creep testing in tension. Method of test
    7/15/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30445368 DC:2022

    BS EN ISO 6507-1. Metallic materials. Vickers hardness test Part 1. Test method
    7/15/2022 - PDF - English -
    Learn More
    €24.00

  • ASTM B906-22

    Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
    7/15/2022 - PDF - English -
    Learn More
    €57.00

  • UNE-EN ISO 7539-9:2022

    Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021)
    7/13/2022 - PDF - English -
    Learn More
    €99.60

  • UNE-EN 10250-4:2022

    Open die steel forgings for general engineering purposes - Part 4: Stainless steels
    7/13/2022 - PDF - English -
    Learn More
    €84.00

  • UNE-EN 10250-2:2022

    Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
    7/13/2022 - PDF - Spanish -
    Learn More
    €60.00

  • UNE-EN 10250-1:2022

    Open die steel forgings for general engineering purposes - Part 1: General requirements
    7/13/2022 - PDF - Spanish -
    Learn More
    €68.00

  • UNE-EN 10250-3:2022

    Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
    7/13/2022 - PDF - English -
    Learn More
    €69.60

  • UNE-EN ISO 683-5:2022

    Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
    7/13/2022 - PDF - Spanish -
    Learn More
    €77.00

  • UNE-EN 10264-2:2022

    Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications
    7/13/2022 - PDF - Spanish -
    Learn More
    €60.00

  • UNE-EN 10250-2:2022

    Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels
    7/13/2022 - PDF - English -
    Learn More
    €72.00

  • UNE-EN ISO 7539-9:2022

    Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2021)
    7/13/2022 - PDF - Spanish -
    Learn More
    €83.00

  • UNE-EN 10250-1:2022

    Open die steel forgings for general engineering purposes - Part 1: General requirements
    7/13/2022 - PDF - English -
    Learn More
    €81.60

  • UNE-EN 10250-4:2022

    Open die steel forgings for general engineering purposes - Part 4: Stainless steels
    7/13/2022 - PDF - Spanish -
    Learn More
    €70.00

  • UNE-EN ISO 683-5:2022

    Heat treatable steels, alloy steels and free-cutting steels - Part 5: Nitriding steels (ISO 683-5:2017)
    7/13/2022 - PDF - English -
    Learn More
    €92.40

  • UNE-EN 10264-2:2022

    Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applications
    7/13/2022 - PDF - English -
    Learn More
    €72.00

  • UNE-EN 10250-3:2022

    Open die steel forgings for general engineering purposes - Part 3: Alloy special steels
    7/13/2022 - PDF - Spanish -
    Learn More
    €58.00

  • BS EN ISO 16808:2022

    Metallic materials. Sheet and strip. Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems
    7/8/2022 - PDF - English -
    Learn More
    €250.00

  • BS EN ISO 24656:2022

    Cathodic protection of offshore wind structures
    7/4/2022 - PDF - English -
    Learn More
    €430.00

  • ASTM A1096/A1096M-22

    Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
    7/1/2022 - PDF - English -
    Learn More
    €51.00

  • NF A06-651 (07/2022)

    Analyse chimique du titane et des alliages de titane - Détermination de la teneur en oxygène
    7/1/2022 - Paper - French -
    Learn More
    €48.00

  • NF EN 12392+A1, A50-120 (07/2022)

    Aluminium et alliages d'aluminium - Produits corroyés et moulés - Exigences particulières pour les produits destinés à la fabrication des appareils à pression
    7/1/2022 - Paper - French -
    Learn More
    €154.67

  • ASTM A615/A615M-22 + Redline

    Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
    7/1/2022 - PDF - English -
    Learn More
    €61.00

  • DIN EN 10202:2022-07

    Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel, German version EN 10202:2022
    7/1/2022 - PDF - German -
    Learn More
    €141.96

  • NF EN 12392/IN1, A50-120/IN1 (07/2022)

    Aluminium and aluminium alloys - Wrought products and cast products - Special requirements for products intended for the production of pressure equipment
    7/1/2022 - Paper - French -
    Learn More
    €98.00

  • ASTM B194-22

    Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    7/1/2022 - PDF - English -
    Learn More
    €57.00

  • DIN EN 10250-1:2022-07

    Open die steel forgings for general engineering purposes - Part 1: General requirements, German version EN 10250-1:2022
    7/1/2022 - PDF - German -
    Learn More
    €72.80

  • DIN EN ISO 11652:2022-07

    Steel and iron - Determination of cobalt content - Flame atomic absorption spectrometric method (ISO 11652:1997), German version EN ISO 11652:2022
    7/1/2022 - PDF - German -
    Learn More
    €79.72

  • ASTM E1444/E1444M-22a

    Standard Practice for Magnetic Particle Testing for Aerospace
    7/1/2022 - PDF - English -
    Learn More
    €57.00

  • ASTM A1096/A1096M-22 + Redline

    Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement
    7/1/2022 - PDF - English -
    Learn More
    €61.00

  • PR NF EN 16482, A32-801PR (07/2022)

    Fonderie - Barres de fonte par coulée continue
    7/1/2022 - Paper - English, French -
    Learn More
    €88.50

  • DIN EN 10250-3:2022-07

    Open die steel forgings for general engineering purposes - Part 3: Alloy special steels, German version EN 10250-3:2022
    7/1/2022 - PDF - German -
    Learn More
    €52.90

  • ASTM B194-22 + Redline

    Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    7/1/2022 - PDF - English -
    Learn More
    €68.00

  • DIN EN 10250-2:2022-07

    Open die steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steels, German version EN 10250-2:2022
    7/1/2022 - PDF - German -
    Learn More
    €52.90

  • DIN EN 15112:2022-07

    External cathodic protection of well casings, German version EN 15112:2022
    7/1/2022 - PDF - German -
    Learn More
    €104.95

  • ASTM E1444/E1444M-22a + Redline

    Standard Practice for Magnetic Particle Testing for Aerospace
    7/1/2022 - PDF - English -
    Learn More
    €68.00

  • ASTM A615/A615M-22

    Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
    7/1/2022 - PDF - English -
    Learn More
    €51.00

  • DIN EN ISO 18203:2022-07

    Steel - Determination of the thickness of surface-hardened layers (ISO 18203:2016), German version EN ISO 18203:2022
    7/1/2022 - PDF - German -
    Learn More
    €85.79

  • DIN EN ISO 9647:2022-07

    Steel - Determination of vanadium content - Flame atomic absorption spectrometric method (FAAS) (ISO 9647:2020), German version EN ISO 9647:2022
    7/1/2022 - PDF - German -
    Learn More
    €79.72

  • BS EN 10250-2:2022 + Redline

    Tracked Changes. Open die steel forgings for general engineering purposes Non-alloy quality and special steels
    6/30/2022 - PDF - English -
    Learn More
    €235.00

  • 22/30393106 DC:2022

    BS EN ISO 23779. Shot blasting machinery. safety and environmental requirements
    6/30/2022 - PDF - English -
    Learn More
    €24.00

  • BS EN ISO 12696:2022

    Cathodic protection of steel in concrete
    6/30/2022 - PDF - English -
    Learn More
    €348.00

  • NACE SP0176-2022

    Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated With Petroleum Production
    6/30/2022 - PDF - English -
    Learn More
    €192.00

  • BS EN 10250-3:2022 + Redline

    Tracked Changes. Open die steel forgings for general engineering purposes Alloy special steels
    6/28/2022 - PDF - English -
    Learn More
    €197.00

  • NBN EN ISO 16539:2022

    Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
    6/25/2022 - PDF - French -
    Learn More
    €121.00

  • NBN EN ISO 22479:2022

    Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
    6/25/2022 - PDF - English -
    Learn More
    €89.00

  • NBN EN ISO 21207:2022

    Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
    6/25/2022 - PDF - German -
    Learn More
    €58.00

  • NBN EN ISO 22479:2022

    Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
    6/25/2022 - PDF - French -
    Learn More
    €89.00

  • NBN EN ISO 16539:2022

    Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - "Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013)
    6/25/2022 - PDF - German -
    Learn More
    €121.00

  • NBN EN ISO 21207:2022

    Corrosion tests in artificial atmospheres - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying (ISO 21207:2015)
    6/25/2022 - PDF - English -
    Learn More
    €58.00

  • NBN EN ISO 22479:2022

    Corrosion of metals and alloys - Sulfur dioxide test in a humid atmosphere (fixed gas method) (ISO 22479:2019)
    6/25/2022 - PDF - German -
    Learn More
    €89.00

  • NBN EN ISO 16539:2022

    Corrosion of metals and alloys - Accelerated cyclic corrosion tests with exposure to synthetic ocean water salt-deposition process - Dry" and "wet" conditions at constant absolute humidity (ISO 16539:2013) "
    6/25/2022 - PDF - English -
    Learn More
    €121.00

  • VdTÜV WB 499:2022-06

    Hochkorrosionsbeständige Nickelbasis-Legierung NiCr22Mo9Nb, Werkstoff-Nr. 2.4856 Band, Blech, Formstahl, nahtloses Rohr, Stab und Schmiedestück
    6/20/2022 - PDF - German -
    Learn More
    €28.80

  • VdTÜV WB 499 Supplement:2022-06

    Hochkorrosionsbeständige Nickelbasis-Legierung NiCr22Mo9Nb, Werkstoff-Nr. 2.4856 Hersteller: Band, Blech, Formstahl, nahtloses Rohr, Stab und Schmiedestück
    6/20/2022 - PDF - German -
    Learn More
    €25.00

  • UNE-EN ISO 7668:2022

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
    6/15/2022 - PDF - English -
    Learn More
    €81.60

  • UNE-EN 603-3:2022

    Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
    6/15/2022 - PDF - English -
    Learn More
    €88.80

  • ASTM E2448-22 + Redline

    Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
    6/15/2022 - PDF - English -
    Learn More
    €65.00

  • ASTM E367-22 + Redline

    Standard Test Methods for Chemical Analysis of Ferroniobium
    6/15/2022 - PDF - English -
    Learn More
    €61.00

  • ASTM E290-22

    Standard Test Methods for Bend Testing of Material for Ductility
    6/15/2022 - PDF - English -
    Learn More
    €57.00

  • ASTM E1306-22

    Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Melting for Spectrochemical Analysis
    6/15/2022 - PDF - English -
    Learn More
    €51.00

  • UNE-EN ISO 7668:2022

    Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20°, 45°, 60° or 85° (ISO 7668:2021)
    6/15/2022 - PDF - Spanish -
    Learn More
    €68.00

  • UNE-EN 603-3:2022

    Aluminium and aluminium alloys - Wrought forging stock - Part 3: Tolerances on dimensions and form
    6/15/2022 - PDF - Spanish -
    Learn More
    €74.00

  • ASTM E290-22 + Redline

    Standard Test Methods for Bend Testing of Material for Ductility
    6/15/2022 - PDF - English -
    Learn More
    €68.00

  • ASTM E2448-22

    Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
    6/15/2022 - PDF - English -
    Learn More
    €54.00

  • ASTM E367-22

    Standard Test Methods for Chemical Analysis of Ferroniobium
    6/15/2022 - PDF - English -
    Learn More
    €51.00

  • ASTM E1306-22 + Redline

    Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Melting for Spectrochemical Analysis
    6/15/2022 - PDF - English -
    Learn More
    €61.00

  • BS EN 10250-1:2022 + Redline

    Tracked Changes. Open die steel forgings for general engineering purposes General requirements
    6/10/2022 - PDF - English -
    Learn More
    €235.00

  • BS EN ISO 18203:2022

    Steel. Determination of the thickness of surface-hardened layers
    6/10/2022 - PDF - English -
    Learn More
    €180.00

  • BS EN ISO 11652:2022

    Steel and iron. Determination of cobalt content. Flame atomic absorption spectrometric method (ISO 11652:1997)
    6/7/2022 - PDF - English -
    Learn More
    €250.00

  • VdTÜV WB 432/1:2022-06

    Hochkorrosionsbeständige Nickelbasis-Legierung NiCr21Mo, Werkstoff-Nr. 2.4858
    6/7/2022 - PDF - German -
    Learn More
    €28.80

  • BS ISO 15208:2022 + Redline

    Tracked Changes. Continuous hot-dip zinc-coated twin-roll cast steel sheet of commercial quality
    6/7/2022 - PDF - English -
    Learn More
    €235.00

  • VdTÜV WB 432/1 Supplement:2022-06

    Hochkorrosionsbeständige Nickelbasis-Legierung NiCr21Mo, Werkstoff-Nr. 2.4858 Hersteller: Band, Blech
    6/7/2022 - PDF - German -
    Learn More
    €25.00

  • BS ISO 1352:2021 + Redline

    Tracked Changes. Metallic materials. Torque-controlled fatigue testing
    6/6/2022 - PDF - English -
    Learn More
    €382.00

  • BS EN 10169:2022 + Redline

    Tracked Changes. Continuously organic coated (coil coated) steel flat products. Technical delivery conditions
    6/6/2022 - PDF - English -
    Learn More
    €382.00

  • NBN EN ISO 24656:2022

    Cathodic protection of offshore wind structures (ISO 24656:2022)
    6/4/2022 - PDF - English -
    Learn More
    €205.00

  • NBN EN ISO 24656:2022

    Kathodischer Korrosionsschutz von Offshore-Windparkbauwerken (ISO 24656:2022)
    6/4/2022 - PDF - German -
    Learn More
    €205.00

  • NBN EN ISO 24656:2022

    Cathodic protection of offshore wind structures (ISO 24656:2022)
    6/4/2022 - PDF - French -
    Learn More
    €205.00

  • 22/30453295 DC:2022

    BS EN 10359. Laser welded tailored blanks. Technical delivery conditions
    6/2/2022 - PDF - English -
    Learn More
    €24.00

  • 22/30453292 DC:2022

    BS EN 10209. Cold rolled low carbon steel flat products for vitreous enamelling. Technical delivery conditions
    6/2/2022 - PDF - English -
    Learn More
    €24.00

  • ASTM E215-22

    Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
    6/1/2022 - PDF - English -
    Learn More
    €57.00

  • DIN EN ISO 683-3:2022-06

    Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022), German version EN ISO 683-3:2022
    6/1/2022 - PDF - German -
    Learn More
    €110.00

  • FD CEN/TR 12471, A06-222 (06/2022)

    Méthode de détection qualitative du nickel dans les articles introduits dans les parties percées du corps humain et les produits destinés à entrer en contact direct et prolongé avec la peau
    6/1/2022 - Paper - French -
    Learn More
    €48.00

  • DIN 50159-2:2022-06

    Metallic materials - Hardness testing with the UCI method - Part 2: Verification and calibration of the testing devices
    6/1/2022 - PDF - German -
    Learn More
    €59.63

  • ASTM E381-22

    Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
    6/1/2022 - PDF - English -
    Learn More
    €51.00

  • NF EN ISO 22479, A91-169 (06/2022)

    Corrosion des métaux et alliages - Essai au dioxyde de soufre en atmosphère humide (méthode avec volume fixe de gaz)
    6/1/2022 - Paper - French -
    Learn More
    €75.67

  • ASTM F2516-22

    Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
    6/1/2022 - PDF - English -
    Learn More
    €51.00

  • UNE-EN 1706:2020+A1:2022

    Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
    6/1/2022 - PDF - English -
    Learn More
    €96.00

  • ASTM E215-22 + Redline

    Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube
    6/1/2022 - PDF - English -
    Learn More
    €68.00

  • DIN EN ISO 7500-1 Beiblatt 1:2022-06

    Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 1: General for requirements, calibration and verification of tension, compression and flexion testing machines
    6/1/2022 - PDF - German -
    Learn More
    €52.90

  • NF EN 17391, A09-611 (06/2022)

    Essais non destructifs - Contrôle par émission acoustique - Surveillance en service par émission acoustique des équipements et structures métalliques sous pression - Exigences générales
    6/1/2022 - Paper - French -
    Learn More
    €108.33

  • ASTM E1447-22

    Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
    6/1/2022 - PDF - English -
    Learn More
    €51.00

  • NF EN ISO 21207, A91-168 (06/2022)

    Essais de corrosion en atmosphères artificielles - Essais de corrosion accélérée par expositions alternées à des gaz oxydants ou au brouillard salin neutre et à un séchage
    6/1/2022 - Paper - French -
    Learn More
    €60.67

  • NF EN ISO 24656, A05-801 (06/2022)

    Protection cathodique des structures éoliennes en mer
    6/1/2022 - Paper - French -
    Learn More
    €185.67

  • DIN EN 10169:2022-06

    Continuously organic coated (coil coated) steel flat products - Technical delivery conditions, German version EN 10169:2022
    6/1/2022 - PDF - German -
    Learn More
    €115.33

  • DIN 50159-1:2022-06

    Metallic materials - Hardness testing with the UCI method - Part 1: Test method
    6/1/2022 - PDF - German -
    Learn More
    €72.80

  • DIN EN 13411-4:2022-06

    Terminations for steel wire ropes - Safety - Part 4: Metal and resin socketing, German version EN 13411-4:2021
    6/1/2022 - PDF - German -
    Learn More
    €85.79

  • NF ISO 23515, A08-654 (06/2022)

    Titane et alliages de titane - Système de désignation
    6/1/2022 - Paper - French -
    Learn More
    €60.67

  • ASTM E381-22 + Redline

    Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
    6/1/2022 - PDF - English -
    Learn More
    €61.00

  • ASTM F2516-22 + Redline

    Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
    6/1/2022 - PDF - English -
    Learn More
    €61.00

  • DIN EN 16482:2022-06

    Founding - Continuous cast iron bars, German and English version prEN 16482:2022
    6/1/2022 - PDF - English, German -
    Learn More
    €92.62

  • DIN EN ISO 7500-1 Beiblatt 2:2022-06

    Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system - Supplement 2: General for requirements, verification and calibration of spring testing machines
    6/1/2022 - PDF - German -
    Learn More
    €39.35

  • ASTM E1447-22 + Redline

    Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry
    6/1/2022 - PDF - English -
    Learn More
    €61.00

  • NF EN ISO 16539, A91-167 (06/2022)

    Corrosion des métaux et alliages - Essais de corrosion cyclique accélérée avec exposition à l'eau de mer synthétique par procédé de dépôt salin - Conditions "sèches" et conditions "humides" à taux d'humidité absolue constant
    6/1/2022 - Paper - French -
    Learn More
    €75.67

  • UNE-EN 1706:2020+A1:2022

    Aluminium and aluminium alloys - Castings - Chemical composition and mechanical properties
    6/1/2022 - PDF - Spanish -
    Learn More
    €80.00

  • BS ISO 18338:2021

    Metallic materials. Torsion test at room temperature
    5/31/2022 - PDF - English -
    Learn More
    €250.00

  • BS EN 15112:2022

    External cathodic protection of well casings
    5/31/2022 - PDF - English -
    Learn More
    €293.00

  • BS EN 12020-1:2022

    Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 AW-6063 Technical conditions for inspection delivery
    5/31/2022 - PDF - English -
    Learn More
    €151.00

  • BS EN 10202:2022 + Redline

    Tracked Changes. Cold reduced tinmill products. Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel
    5/30/2022 - PDF - English -
    Learn More
    €454.00

  • BS EN 12020-1:2022 + Redline

    Tracked Changes. Aluminium and aluminium alloys. Extruded precision profiles in alloys EN AW-6060 AW-6063 Technical conditions for inspection delivery
    5/30/2022 - PDF - English -
    Learn More
    €197.00

  • NBN EN ISO 16808:2022

    Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
    5/28/2022 - PDF - French -
    Learn More
    €121.00

  • NBN EN ISO 16808:2022

    Metallic materials - Sheet and strip - Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems (ISO 16808:2022)
    5/28/2022 - PDF - English -
    Learn More
    €121.00

  • BS ISO 4968:2022 + Redline

    Tracked Changes. Steel. Macrographic examination by sulfur print (Baumann method)
    5/27/2022 - PDF - English -
    Learn More
    €235.00

  • BS EN 10250-3:2022

    Open die steel forgings for general engineering purposes Alloy special steels
    5/26/2022 - PDF - English -
    Learn More
    €151.00

  • BS EN 10250-2:2022

    Open die steel forgings for general engineering purposes Non-alloy quality and special steels
    5/26/2022 - PDF - English -
    Learn More
    €180.00

  • BS ISO 4968:2022

    Steel. Macrographic examination by sulfur print (Baumann method)
    5/23/2022 - PDF - English -
    Learn More
    €180.00

  • BS EN 10250-1:2022

    Open die steel forgings for general engineering purposes General requirements
    5/23/2022 - PDF - English -
    Learn More
    €180.00

  • NBN EN ISO 12696:2022

    Cathodic protection of steel in concrete (ISO 12696:2022)
    5/21/2022 - PDF - German -
    Learn More
    €205.00

  • NBN EN ISO 12696:2022

    Cathodic protection of steel in concrete (ISO 12696:2022)
    5/21/2022 - PDF - English -
    Learn More
    €205.00

  • NBN EN ISO 12696:2022

    Protection cathodique de l’acier dans le béton (ISO 12696:2022)
    5/21/2022 - PDF - French -
    Learn More
    €205.00

  • VdTÜV WB 400 Supplement:2022-05

    Hochkorrosionsbeständige Legierung NiMo16Cr15W, Werkstoff-Nr. 2.4819 Hersteller: Blech, Band, Schmiedestück, Stange, Rohr, Ring
    5/20/2022 - PDF - German -
    Learn More
    €25.00

  • BS EN 15093:2022

    Safety of machinery. Safety requirements for hot flat rolling mills
    5/20/2022 - PDF - English -
    Learn More
    €377.00

  • VdTÜV WB 400:2022-05

    Hochkorrosionsbeständige Legierung NiMo16Cr15W, Werkstoff-Nr. 2.4819 Blech, Band, Schmiedestück, Stange, Rohr, Ring
    5/20/2022 - PDF - German -
    Learn More
    €28.80

Items 1401 to 1600 of 14673 total

Set Ascending Direction
per page

List  Grid